首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 78 毫秒
1.
Entrainment of planktonic foraminifera: effect of bulk density   总被引：1，自引：0，他引：1  
Depositional hydrodynamics have been studied using settling rate distributions of Norwegian deep sea sediments (between Jan Mayen Island and the Vøring Plateau), together with Shields’ critical shear stress velocities. Planktonic foraminifera are the dominant sand sized component of these sediments. The bulk density of the foraminifera was calculated from their settling velocity, sieve size and shape. Density decreases from 2·39 g cm?3 at 0·05 mm diameter to 1·37 g cm?3 at 0·35 mm diameter. These density and size data were used to construct a threshold sediment movement curve. From the similarity in their Shield's critical shear-stress velocities and the observed correlation of foraminifera size with decreasing percentage of fine fraction, it is concluded that the two components, the sand size foraminifera and the quartz and carbonate silt, are transport-equivalent.  相似文献   

2.
Jaco H. Baas 《Sedimentology》1999,46(1):123-138
A flume study on the development and equilibrium morphology of current ripples in fine sand (D50 = 0·238 mm) was performed to extend an empirical model for current ripple stability in 0·095 mm sand to larger grain sizes. The results of the flume experiments agree with the very fine sand model that current ripple development from a flat bed is largely independent of flow velocity. At all flow velocities, ripples evolve from incipient, through straight, sinuous and non-equilibrium linguoid, to equilibrium linguoid plan morphology. The time needed to achieve an equilibrium linguoid plan form is related to an inverse power of flow velocity and ranges from several minutes to more than hundreds of hours. Average equilibrium height and length are 17·0 mm and 141·1 mm respectively. These values are about 20% larger than in very fine sand. Equilibrium ripple height and length are proportional to flow velocity near the stability field of dunes. In the same velocity range, a characteristic grouping of ripples with smaller ripples migrating on the upstream face of larger ripples was observed. Bed-form development shows a conspicuous two-phase behaviour at flow velocities < 0·49 m s?1. In the first phase of development, ripple height and length increase along an exponential path, similar to that at higher flow velocities, thus reaching intermediate equilibrium values of 14·8 mm and 124·5 mm respectively. After some time, however, a second phase commences, that involves a rapid increase in bed-form size to the typical equilibrium values for 0·238 mm sand. A comparison with literature data shows that the results obtained for 0·238 mm sand agree reasonably well with other flume studies at similar grain size. Yet considerable variability in the relationships between ripple dimensions and flow strength ensues from, among others, underestimation of equilibrium time, shallow flow depths and differences in sediment texture.  相似文献   

3.
Experimental studies of subcritical, unidirectional flow over upper stage plane beds of medium grained sand reveal the ubiquitous presence of low amplitude bedwaves. Flow depth was 0·11 m, mean flow velocities were 0·86–1·0 m s?1, shear velocities were 0·058–0·71 m s?1 and dimensionless shear stresses were 0·56–0·87. Bedwaves are asymmetrical in profile and range from 0·75 to 11 mm in height (mainly 2–6 mm), from 0·7 to 1·3 m in wavelength and have mean celerities of 10 mm s?1. Flow records suggest that the bedwaves are associated with accelerating flow over the bedwave crests and flow which decelerates and diverges laterally over the troughs. High resolution bed profiling during aggradation of the bed combined with subsequent box coring illustrates that these bedwaves are responsible for the planar laminae characteristic of upper stage plane beds. Lamina preservation is dependent upon the mean aggradation rate and the sequence of bedwaves of different height crossing any point; individual laminae are more readily preserved at higher aggradation rates where the possibility of reworking by later bedwaves is reduced. Laminae are recognized by small changes in grain size and commonly a fining upwards at the top of laminae which is generated by fine grained material infiltrating a lower lamina in the leeside of a bedwave.  相似文献   

4.
JACO H. BAAS 《Sedimentology》1994,41(2):185-209
An empirical model is constructed for the development and equilibrium dimensions of small scale, unidirectional bedforms in sand with a median grain size of 0·095 mm, based on a series of steady flow experiments in a flume. Current ripples always attain a linguoid plan morphology with constant average height (13·1 mm) and wavelength (115·7 mm), provided that sufficient time is allowed for their formation. The development pattern of these ripples on a flat bed is independent of flow velocity, and involves four stages: (1) incipient ripples; (2) straight and sinuous ripples; (3) non-equilibrium linguoid ripples, and (4) equilibrium linguoid ripples. Straight and sinuous ripples are non-equilibrium bedforms at all flow velocities. The time needed to reach equilibrium dimensions is related to the inverse power of flow velocity and ranges from several minutes to more than hundreds of hours. At flow velocities where washed ripples are stable, the equilibrium wavelength is similar to that of equilibrium linguoid ripples, but the equilibrium height rapidly decreases from 13·1 mm to zero towards upper stage plane bed conditions. The results of the flume experiments correspond reasonably well with those of previous studies, provided that various complicating factors, such as different experimental methods, different sediment characteristics, shallow flow depths and non-equilibrium runs, are accounted for.  相似文献   

5.
Abstract Reliable predictions of wind erosion depend on the accuracy of determining whether erosion occurs or not. Among the several factors that govern the initiation of soil movement by wind, surface moisture is one of the most significant. Some widely used models that predict the threshold shear velocity for particle detachment of wet soils by wind were critically reviewed and evaluated. Wind‐tunnel experiments were conducted on pre‐wetted dune sand with moisture contents ranging from 0·00 to 0·04 kg kg?1. Sand samples were exposed to different wind speeds for 2 min. Moisture content was determined gravimetrically before and after each experiment, and the saltation of sand particles was recorded electronically with a saltiphone. Shear velocities were deduced from the wind speed profiles. For each moisture content, the experiments were repeated at different shear velocities, with the threshold shear velocity being determined by least‐squares analysis of the relationships between particle number rates and shear velocity. Within the 2‐min test runs, temporal changes in particle number rates and moisture contents were detected. A steep increase in the threshold shear velocity with moisture content was observed. When comparing the models, large differences between the predicted results became apparent. At a moisture content of 0·007 kg kg?1, which is half the moisture content retained to the soil matrix at a water tension (or matric potential) of ?1·5 MPa, the increase in ‘wet’ threshold shear velocity predicted with the different models relative to the dry threshold shear velocity ranged from 117% to 171%. The highest care should therefore be taken when using current models to predict the threshold shear velocity of wet sediment. Nevertheless, the models of Chepil (1956; Proc. Soil Sci. Soc. Am., 20, 288–292) and Saleh & Fryrear (1995; Soil Sci., 160, 304–309) are the best alternatives available.  相似文献   

6.
The interaction between channel geometry, flow, sediment transport and deposition associated with a midstream island was studied in a braided to meandering reach of the Calamus River, Nebraska Sandhills. Hydraulic and sediment transport measurements were made over a large discharge range using equipment operated from catwalk bridges. The relatively low sinuosity channel on the right-hand side of the island carries over 70% of the water discharge at high flow stages and 50–60% at low flow stages. As a result, mean velocity, depth, bed shear stress and sediment transport rate tend to be greater here than in the more strongly curved left-hand channel. The loci of maximum flow velocity, depth and bed shear stress are near the centre of the channel upstream of the island, but then split and move towards the outer banks of both channels downstream. Variations in these loci depend on the flow stage. Topographically induced across-stream flows are generally stronger than the weak, curvature-induced secondary circulations. Water surface topography is controlled mainly by centrifugal accelerations and local changes in downstream flow velocity. The averaged water surface slope of the study reach varies very little with discharge, having values between 0·00075 and 0·00090. As bed shear stress generally varies in a similar way to mean velocity, friction coefficients vary little, normally being in the range 0·07–0·13. These values are similar to those in straight channels with sandy dune-covered beds. Bedload is moved mainly as dunes at all flow stages. Grain size is mainly medium sand with coarse sand moved in thalwegs adjacent to the cut banks, and with fine sand at the downstream end of the island. These patterns of flow velocity, depth, water surface topography, bed shear stress, bedload transport rate and mean grain size can be accurately predicted using theoretical models of flow, bed topography and sediment transport rate in single river bends, applied separately to the left and right channels. During high flow stages deposition occurs persistently near the downstream end of the island, and cut banks are eroded. Otherwise, erosion and deposition occurs only locally within the channel as discharge varies. Abandonment and filling of a strongly curved channel segment may occur by migration of an upstream bar into the channel entrance at a high flow stage.  相似文献   

7.
Evolution and mechanics of a Miocene tidal sandwave   总被引：3，自引：0，他引：3  
A remarkable exposure of Miocene marine molasse in western Switzerland records the evolution of a tidal sandwave over a period of approximately 2 1/2 months. The sandwave is composed of tidal ‘bundles’ in which a sandwave reactivation stage and full vortex stage can be recognized for the dominant flow (ebb tide) and a rippled flood apron overlain by high water drape for the reversed flow. Bundle thicknesses vary systematically through neap–spring cycles, with a periodicity of 27 demonstrating the semi-diurnal lunar control of sedimentation. Waves were an additional component, especially when superimposed on flood tides, producing near-symmetrical combined-flow ripple marks in the flood apron. Tidal current velocities are estimated using critical shear velocities for entrainment, the ripple-dune transition and the dune-plane bed transition. Using appropriate estimates of roughness lengths and a logarithmic velocity law, maximum tidal speeds at 1 m above the bed were approximately 0·6 m sec?1 for ebbs and up to 0·5 m sec?1 for floods. The enhancement by waves of bed shear stress (τwc/τ of approximately 2 for 1 m high waves) under flood currents implies flood tidal velocities closer to 0·2–0·3 m sec?1. Peak instantaneous bedload sediment transport rates using a modified Bagnold equation are nearly 5 times greater under ebb tides than floods. The average net sediment transport rate at springs (0·04 kg m?1 sec?1) is over 10 times greater than at neaps (0·002 kg m?1 sec?1). Comparison with transport rates in modern tidal environments suggests that the marine molasse of Switzerland was deposited under spatially confined and relatively swift tidal flows not dissimilar to those of the present Dutch tidal estuaries.  相似文献   

8.
利用沉积物粒度数据反演沉积水动力参数   总被引：5，自引：0，他引：5       下载免费PDF全文
周蒂 《地质科学》1999,34(1):49-58
波罗的海西部达斯浅滩海底沉积物各粒级的空间分布由物源区向外有规律变化,反映出沉积水动力条件的控制作用,反过来也为根据沉积物各粒级的空间分布反演近海底优势水流方向和速度提供了依据。利用沉积水动力经验公式及分选系数梯度、Z统计量等设计了反演优势流向和流速的方法,并应用于该海区,估计了该区海底以上1m的近海底优势水流方向及优势流速。与有限的实测及模拟资料进行对比,估计的海流模式吻合较好,但流速的数值可能总体上偏高,需要用更多实测资料来校正和标定。  相似文献   

9.
A series of flume runs using a 12·5 h tidal cycle was conducted in order to determine whether or not flaser beds could be formed in nearshore subtidal areas as a result of purely tidal activity. The effects of clay composition, sand size, bed thickness, and maximum current velocity were investigated. The resistance to erosion of mud beds 10 mm thick or less is low; shear stresses approximately equal to those needed to initiate sand movement resulted in rapid erosion of the mud beds. In the light of the low resistance to erosion of the beds, and the necessity for increased thicknesses and very long time periods for their resistance to be increased substantially, it is concluded that the formation of these beds is unlikely to result from purely tidal action unless very large amounts of mud are available. A mechanism which more readily permits the deposition of thicker beds and longer consolidation times, such as storm action, is preferred.  相似文献   

10.
《Sedimentology》2018,65(6):1859-1874
Ripples are prevalent in aeolian landscapes. Many researchers have focused on the shape and formation of sand ripples, but few have studied the differences in the particle size of sand on crests and in troughs along bed, especially the variations caused by changes in friction velocity and the wind‐blowing duration. A particle size of 158 μm (d ) was used to create aeolian ripples in a wind tunnel under four friction velocities (u *) with different wind duration times (t ). Samples were collected from the surfaces of ripple crests and troughs, respectively, at seven sites, and particle sizes were measured using a Malvern Mastersizer 2000. The main results were: (i) The particle size distributions of sand in troughs are unimodal with slight variations of particle size parameters, including mean particle size, standard deviation, skewness and kurtosis, etc., under different conditions, while these particle size parameters of sand on crests change with friction velocity and deflation time. Moreover, some of the particle distribution curves for the sand on crests do not follow typical unimodal curves. (ii) With increasing friction velocity or deflation duration, the sand on the crests shows a coarsening process relative to those on the bed surface. The particle size of sand on crests at a 1 m bed increases linearly with friction velocity (d  =  344·27 + 34·54 u *) at a given wind‐blowing duration. The particle sizes of sand on crests at 1 m, 2 m and 4 m beds increase with a power‐law relationship (d  = a + t b, where a and b are fitting parameters) with deflation time at a given friction velocity. (iii) The probability cumulative curves of sand showed a three‐section pattern in troughs and on most of the crests but a four‐section pattern at crest locations due to increased influence by friction velocity and deflation time. The proportions of the sediment moved by suspension, saltation and creep in the three‐section pattern were within the ranges of 0·2% to 2·0%, 97·0% to 98·9%, and 0·8% to 3·0%, respectively. For the four‐section pattern, suspension accounted for 0·3% and 3·0%, and the proportion of creep increased with friction velocity and deflation time, while saltation decreased accordingly. Although these results require additional validation, they help to advance current understanding of the grain‐size characteristics of aeolian ripples.  相似文献   

11.
Understanding how mud moves and deposits is essential for conceptualizing the dynamic nature of surface environments and their ancient counterparts. Experimental study has largely been pursued by civil engineers, using kaolinite as an active ingredient. Yet, applying their data to the physical comprehension of mudstone sedimentology is hampered by multiple flume configurations between labs, and data sets tailored to specific engineering needs. The need for a better grasp of underlying processes is acute, given recent flume studies that show that moving suspensions form large bedload floccules, migrating floccule ripples and bed accretion under currents capable of moving sand grains. To advance mudstone sedimentology, integrated study of suspended sediment concentration, salinity and bed shear stress on the deposition of floccules is crucial. Described here is a set of tightly controlled experiments that explored suspended sediment concentrations from 70 to 900 mg/l, freshwater, brackish and marine salinities, flow velocities in the 5 to 50 cm/s range (equivalent to 0.01 to 0.58 Pa bed shear), measured the size of in-flow and bedload floccules, and the critical velocity of sedimentation that marks the onset of sustained bedload accumulation. The critical velocity of sedimentation of kaolinite clays is in the 26 to 28 cm/s flow velocity range (0.22 to 0.25 Pa), appears insensitive to a wide range of suspended sediment concentrations and salinities, and coincides with the formation of sand-size bedload floccules. Further decrease of flow velocity/bed shear stress is accompanied by a steady increase in the size of bedload floccules. Large bedload floccules appear to form in the high-shear basal part of the flow, a phenomenon requiring further investigation. Better understanding of the mechanisms that facilitate mud deposition from moving suspensions is critical for more realistic assessments of the depositional conditions of mud and mudstones, as well as for refining predictive models for the flux of fine-grained sediments across the Earth's surface.  相似文献   

12.
Interpreting the physical dynamics of ancient environments requires an understanding of how current‐generated sedimentary structures, such as ripples and dunes, are created. Traditional interpretations of these structures are based on experimental flume studies of unconsolidated quartz sand, in which stepwise increases in flow velocity yield a suite of sedimentary structures analogous to those found in the rock record. Yet cyanobacteria, which were excluded from these studies, are pervasive in wet sandy environments and secrete sufficient extracellular polysaccharides to inhibit grain movement and markedly change the conditions under which sedimentary structures form. Here, the results of flume experiments using cyanobacteria‐inoculated quartz sand are reported which demonstrate that microbes strongly influence the behaviour of unconsolidated sand. In medium sand, thin (ca 0·1 to 0·5 mm thick) microbial communities growing at the sediment–water interface can nearly double the flow velocity required to produce the traditional sequence of ripple→dune→plane‐bed lamination bedforms. In some cases, these thin film‐like microbial communities can inhibit the growth of ripples or dunes entirely, and instead bed shear stresses result in flip‐over and rip‐up structures. Thicker (ca≥1 mm thick) microbial mats mediate terracing of erosional edges; they also, foster transport of multi‐grain aggregates and yield a bedform progression consisting of flip‐overs→roll‐ups→rip‐ups of bound sand.  相似文献   

13.
The settling behaviour of particulate suspensions and their deposits has been documented using a series of settling tube experiments. Suspensions comprised saline solution and noncohesive glass‐ballotini sand of particle size 35·5 μm < d < 250 μm and volume fractions, φs, up to 0·6 and cohesive kaolinite clay of particle size d < 35·5 μm and volume fractions, φm, up to 0·15. Five texturally distinct deposits were found, associated with different settling regimes: (I) clean, graded sand beds produced by incremental deposition under unhindered or hindered settling conditions; (II) partially graded, clean sand beds with an ungraded base and a graded top, produced by incremental deposition under hindered settling conditions; (III) graded muddy sands produced by compaction with significant particle sorting by elutriation; (IV) ungraded clean sand produced by compaction and (V) ungraded muddy sand produced by compaction. A transition from particle size segregation (regime I) to suppressed size segregation (regime II or III) to virtually no size segregation (IV or V) occurred as sediment concentration was increased. In noncohesive particulate suspensions, segregation was initially suppressed at φs ～ 0·2 and entirely inhibited at φs ≥ 0·6. In noncohesive and cohesive mixtures with low sand concentrations (φs < 0·2), particle segregation was initially suppressed at φm ～ 0·07 and entirely suppressed at φm ≥ 0·13. The experimental results have a number of implications for the depositional dynamics of submarine sediment gravity flows and other particulate flows that carry sand and mud; because the influence of moving flow is ignored in these experiments, the results will only be applicable to flows in which settling processes, in the depositional boundary, dominate over shear‐flow processes, as might be the case for rapidly decelerating currents with high suspended load fallout rates. The ‘abrupt’ change in settling regimes between regime I and V, over a relatively small change in mud concentration (<5% by volume), favours the development of either mud‐poor, graded sandy deposits or mud‐rich, ungraded sandy deposits. This may explain the bimodality in sediment texture (clean ‘turbidite’ or muddy ‘debrite’ sand or sandstone) found in some turbidite systems. Furthermore, it supports the notion that distal ‘linked’ debrites could form because of a relatively small increase in the mud concentration of turbidity currents, perhaps associated with erosion of a muddy sea floor. Ungraded, clean sand deposits were formed by noncohesive suspensions with concentrations 0·2 ≤ φs ≤ 0·4. Hydrodynamic sorting is interpreted as being suppressed in this case by relatively high bed aggradation rates which could also occur in association with sustained, stratified turbidity currents or noncohesive debris flows with relatively high near‐bed sediment concentrations.  相似文献   

14.
为解析波流边界层内泥沙运动,建立了基于水动力-泥沙-床面互馈过程的波流边界层1DV泥沙数学模型,可用于模拟不同床面形态下粉沙-沙的含沙量过程。床面形态模块提供床面形态类型和相应参数;给出了平底和沙波床面粗糙高度和泥沙扩散系数的确定方法;采用了适宜粉沙及沙的制约沉速、底部参考浓度和起动剪切应力等公式;引入含沙量层化效应和制约沉降反映水动力与泥沙之间的相互影响。水槽试验资料验证表明,建立的模型较好地模拟了不同床面不同波流组合条件下的含沙量剖面。在此基础上,讨论了不同床面含沙量剖面模拟方法的差异,指出床面形态是决定含沙量变化的重要因素之一,仅通过改变床面粗糙高度不足以反映漩涡沙波床面的含沙量剖面特征。该模型可为研究波流边界层内泥沙运动和物质输运提供工具。  相似文献   

15.
三峡库区絮凝现象是细颗粒泥沙淤积的重要原因,泥沙絮凝临界条件对三峡库区泥沙淤积规律和模拟具有重要意义。在三峡库区忠县和奉节河段开展泥沙絮凝的现场测量,基于声学多普勒流速仪（Acoustic Doppler Velocimeter,ADV）和泥沙采样测得同步的瞬时流速和含沙量,通过泥沙扩散理论反算现场泥沙沉速及絮团粒径,得到了三峡库区泥沙絮凝度及其与粒径、流速和含沙量的关系。结果表明:库区细颗粒泥沙发生絮凝,且多为中轻度絮凝,重度絮凝较少;库区泥沙絮凝的临界粒径约为0.018 mm,临界流速约为0.7 m/s,临界含沙量约为0.8 kg/m3。研究结果可为三峡库区泥沙的运动规律以及泥沙淤积模拟等提供一定的理论支撑。  相似文献   

16.
High-resolution seismic boomer profiles, with a vertical resolution of less than 1 m, together with piston cores and previous side-scan sonar data, are used to describe late Quaternary sedimentation on the Var deep-sea fan. Chronological control is provided by foram biostratigraphy and radiocarbon dating in cores, and is extended over the fan by seismic correlation. Regional erosional events correspond to the oxygen isotopic stage 2 and 6 glacial maxima. Cores and seismic data define a widespread surface sand layer that is correlated with prodelta failure in 1979 and subsequent submarine cable breaks. Numerical modelling constrains the character of this 1979 turbidity current. It originated from a relatively small slide on the upper prodelta that put sufficient material in suspension to form an accelerating turbidity current which eroded sand from the Var Canyon. The turbidity current was only 30 m thick on the Upper Valley, but experienced significant flow expansion in the Middle Valley to thicknesses of more than 120 m, where it spilled over the eastern Var Sedimentary Ridge at a velocity of about 2·5 m s?1. Other Holocene turbidity currents (with a recurrence interval of 1000 years) were somewhat muddier and thicker, but also deposited sand on the levees of the Middle Valley, and are inferred to have had a similar slide-related origin. Late Pleistocene turbidity currents deposited thick mud beds on the Var Sedimentary Ridge. The presence of sediment waves and the mean cross-flow slope inferred from levee asymmetry indicates that some of these flows were many hundreds of metres thick and flowed at velocities of about 0·35 m s?1. This contrast with Holocene turbidites suggests that a slide origin is unlikely. Estimated times for deposition of thick mud beds on the levees are many days to weeks. The Late Pleistocene flows may therefore result from hyperpycnal flow of glacial outwash in the Var River. The variation in the Late Pleistocene to Holocene turbidite sedimentation is controlled more by variations in sediment supply than by sea-level change.  相似文献   

17.
This study explored the relationship between high-Arctic fiord depositional environments and the natural thermoluminescence (TL) signal of sediments. The energy and duration of light exposure during transportation and deposition controls the TL level of silicate mineral grains in the sediment. The TL signal of sediments rapidly decreases within c. 0·5 km of a glacier sediment source. The highest TL levels are from tills and ice-proximal glacial-marine sediments, which receive little or no light exposure during transportation and deposition. Intermediate and consistent TL levels are recorded for ice-distal glacialmarine muds, c. 0·5–5·0 km from the glacier front, reflecting slower sedimentation rates. The lowest TL levels are for littoral and sublittoral sediments which receive extended light exposure with shoaling. The granulometry of the sediments is fairly homogeneous and is not diagnostic of a sedimentary environment with most samples dominated by silt and clay; littoral and ice-proximal samples exhibit peak abundances in sand. These results suggest that the relative TL signal of sediments is sensitive to a depositional environment, particularly for environments proximal (within 0·5 km) to a glacier terminus and in shallow water, less than 15 m deep.  相似文献   

18.
The objective of our study is to exploit ultrasonic Doppler velocimetry (UDV) to analyze the velocity field within a steady flow on a porous sedimentary bottom. Velocities are measured for several sedimentary beds, as well within the fluid vein as within the sediment. Our results highlight an exponential distribution of the velocities inside the sediment and a discontinuity of the velocity at the interface water–sediment, between the velocity in the free flow and the velocity within the sediment. These results highlight the need to base the analysis of sedimentary transport on the reality of the physical processes at the interface water–sediment.  相似文献   

19.
Heterogeneous coarse grained channels are often characterized by local transitions in bed surface roughness. Distinct spatial zones in terms of grain size have been reported, for example sand ribbons and bedload sheets. The transition from areas of finer to coarser grained surface sediment is often abrupt. However, the effects of these transitions on the shape of the velocity profile and associated shear velocity and roughness length estimates have not been investigated in detail in coarse grained channels. This paper therefore examines the combined effects of a sudden change in surface roughness and of superimposed scales of resistancé on the structure of the turbulent boundary layer. Measurements along roughness transitions from smooth to rough beds were conducted in a flume using artificial roughness features and in a natural gravel bed river. Immediately at the transition from a zone of close packed roughness to a rougher section dominated by obstacles superimposed on the more or less uniform roughness surface, boundary shear stress and roughness length increase considerably. Downstream from this transition, velocity profiles become concave upwards. Downstream and upstream sections show significant differences in terms of near bed velocities (deceleration downstream of the transition), velocity gradient and turbulence intensity of the streamwise velocity component. Comparing the mean velocity profiles corresponding to these two different roughness surfaces gives some indication of the proportion of total shear velocity (or shear stress) associated with the pressure drag produced by large and isolated obstacles.  相似文献   

20.
Measurements of sand transport by wind on a natural beach   总被引：6，自引：0，他引：6  
Bagnold's (1954) and Kawamura's (1951) formulae may be used for the calculation of the sand movement on a natural beach, provided the shear stress velocity U* > 0·D4 m/s. Great discrepancies have been found between calculated and measured sand transport rates for U* < 0·D4 m/s, mainly because of the capillary forces acting on a wet beach. The measured critical shear velocity U*c at the beginning of sand movement on a clean dry beach agrees very well with that predicted by Bagnold's formula. On a dry beach where the sand grains are stuck together, U*c was found to be about 10% higher. On a wet beach U*c appeared to depend on the moisture content of the surface layer. Grain size is a determining parameter in the U*c-moisture content relation. When the angle a between the wind direction at sea and the dune face is between 15° and 85° the streamlines of the wind will bend in the vicinity of the dune face. In consequence this may influence the direction of sediment movement.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号