首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 359 毫秒
1.
As the Dawn mission approaches a successful conclusion at Ceres, it seems time to assess how its findings have sharpened the picture of Ceres’s evolution. Before Dawn, we inferred from Ceres's bulk density of about 2100 kg m?3 that Ceres contained about 25% water by mass. Thermodynamic modeling of the interior evolution suggested that the original accreted ice had to melt even if only long‐lived radionuclides were present, leading to the aqueous alteration of the original chondritic silicates and differentiation of the altered silicates from any remaining water, consistent with telescopic detection of aqueously altered silicates (serpentine and clay minerals) on Ceres’s surface. Earth‐based observations of Ceres’s shape were not accurate enough to constrain the extent of differentiation of its interior. Dawn's results confirm these early findings and extend them dramatically to reveal an evolved and active small planet, probably even today, due to water/ice‐driven processes. A nearly uniform global distribution of surface mineralogy, which includes Mg‐serpentines, ammoniated clays, and salts including carbonates, suggests extensive, endogenous, planet‐wide aqueous alteration. Local exceptions show salt‐rich deposits of varied composition, which suggests subsurface heterogeneities. Concentration of Fe below carbonaceous chondrite levels suggests chemical fractionation, leading to Ceres being chemically differentiated. The high spatial uniformity of element abundance measurements of equatorial regolith also indicates that some ice‐rock fractionation occurred on a global scale. Even some local exposures of ice are seen, especially in higher latitudes and in low‐illumination regions that must be very young, as surface water ice is unstable on time scales of 1–1000 years under Ceres’s surface temperatures. Subsurface ice is also likely in abundance at higher latitudes in at least the upper few meters of the surface, as suggested by near‐surface H‐rich polar deposits. Observations of bright ice deposits in permanently shadowed regions suggest cold‐trapping of migrating H2O across the surface. Gravity field measurements indicate a concentration of mass toward the center and near isostatic equilibrium, consistent with at least some mass differentiation driven by water‐related processes. Abundant small and midsize craters but relaxed or missing large craters suggest a stiff upper crust with water abundance lower than 30 vol%. A sharp decrease in viscosity at ~40 km depth suggests the occurrence of a small fraction of liquid, consistent with earlier thermophysical models. Surface cryogenic features, such as flows, extrusions, and domes, some geologically very recent, are evidence of active water/ice‐driven subsurface processes. Ceres experienced extensive water‐related processes and at least some mass and chemical fractionation and is probably active today, consistent with previous moderate heating thermodynamic models. Clearly, Ceres is a “wet,” evolved planet at the edge of the inner solar system, as described in this special issue. We conclude with a list of questions suggested by the Dawn findings; they especially regard the state and fate of water and its role in driving past and possibly current chemical and physical activity in this dwarf planet.  相似文献   

2.
The Visible and Infrared Spectrometer (VIR) instrument on the Dawn mission observed Ceres’s surface at different spatial resolutions, revealing a nearly uniform global distribution of surface mineralogy. Clearly, Ceres experienced extensive water‐related processes and chemical differentiation. The surface is mainly composed of a dark component (carbon, magnetite?), Mg‐phyllosilicates, ammoniated clays, carbonates, and salts. The observed species suggest endogenous, global‐scale aqueous alteration. While mostly uniform at regional scale, Ceres’s surface shows small localized areas with different species and/or variations in abundances. Few local exposures of water ice are seen, especially at higher latitudes. Sodium carbonates have been identified in several areas on the surface, notably in Occator bright faculae. Organic matter has also been discovered in several places, most conspicuously in a large area close to the Ernutet crater. The observed mineralogies, with the presence of ammoniated species and sodium salts, have a strong resemblance to materials found on other bodies of the outer solar system, such as Enceladus. This poses some questions about the original material from which Ceres accreted, suggesting a colder environment for such material with respect to Ceres’s present position.  相似文献   

3.
Many bodies in the outer solar system are theorized to have an ice shell with a different subsurface material below, be it chondritic, regolith, or a subsurface ocean. This layering can have a significant influence on the morphology of impact craters. Accordingly, we have undertaken laboratory hypervelocity impact experiments on a range of multilayered targets, with interiors of water, sand, and basalt. Impact experiments were undertaken using impact speeds in the range of 0.8–5.3 km s?1, a 1.5 mm Al ball bearing projectile, and an impact incidence of 45°. The surface ice crust had a thickness between 5 and 50 mm, i.e., some 3–30 times the projectile diameter. The thickness of the ice crust as well as the nature of the subsurface layer (liquid, well consolidated, etc.) have a marked effect on the morphology of the resulting impact crater, with thicker ice producing a larger crater diameter (at a given impact velocity), and the crater diameter scaling with impact speed to the power 0.72 for semi‐infinite ice, but with 0.37 for thin ice. The density of the subsurface material changes the structure of the crater, with flat crater floors if there is a dense, well‐consolidated subsurface layer (basalt) or steep, narrow craters if there is a less cohesive subsurface (sand). The associated faulting in the ice surface is also dependent on ice thickness and the substrate material. We find that the ice layer (in impacts at 5 km s?1) is effectively semi‐infinite if its thickness is more than 15.5 times the projectile diameter. Below this, the crater diameter is reduced by 4% for each reduction in ice layer thickness equal to the impactor diameter. Crater depth is also affected. In the ice thickness region, 7–15.5 times the projectile diameter, the crater shape in the ice is modified even when the subsurface layer is not penetrated. For ice thicknesses, <7 times the projectile diameter, the ice layer is breached, but the nature of the resulting crater depends heavily on the subsurface material. If the subsurface is noncohesive (loose) material, a crater forms in it. If it is dense, well‐consolidated basalt, no crater forms in the exposed subsurface layer.  相似文献   

4.
We investigate the region of crater Haulani on Ceres with an emphasis on mineralogy as inferred from data obtained by Dawn's Visible InfraRed mapping spectrometer (VIR), combined with multispectral image products from the Dawn Framing Camera (FC) so as to enable a clear correlation with specific geologic features. Haulani, which is one of the youngest craters on Ceres, exhibits a peculiar “blue” visible to near‐infrared spectral slope, and has distinct color properties as seen in multispectral composite images. In this paper, we investigate a number of spectral indices: reflectance; spectral slopes; abundance of Mg‐bearing and NH4‐bearing phyllosilicates; nature and abundance of carbonates, which are diagnostic of the overall crater mineralogy; plus a temperature map that highlights the major thermal anomaly found on Ceres. In addition, for the first time we quantify the abundances of several spectral endmembers by using VIR data obtained at the highest pixel resolution (~0.1 km). The overall picture we get from all these evidences, in particular the abundance of Na‐ and hydrous Na‐carbonates at specific locations, confirms the young age of Haulani from a mineralogical viewpoint, and suggests that the dehydration of Na‐carbonates in the anhydrous form Na2CO3 may be still ongoing.  相似文献   

5.
The formation of hydrated salts is an expected consequence of aqueous alteration of Main Belt objects, particularly for large, volatile‐rich protoplanets like Ceres. Sulfates, present on water‐bearing planetary bodies (e.g., Earth, Mars, and carbonaceous chondrite parent bodies) across the inner solar system, may contribute to Ceres’ UV and IR spectral signature along with phyllosilicates and carbonates. We investigate the presence and stability of hydrated sulfates under Ceres’ cryogenic, low‐pressure environment and the consequent spectral effects, using UV–Vis–IR reflectance spectroscopy. H2O loss begins instantaneously with vacuum exposure, measured by the attenuation of spectral water absorption bands, and a phase transition from crystalline to amorphous is observed for MgSO4·6H2O by X‐ray powder diffraction. Long‐term (>40 h), continuous exposure of MgSO4·nH2O (n = 0, 6, 7) to low pressure (10?3–10?6 Torr) causes material decomposition and strong UV absorption below 0.5 μm. Our measurements suggest that MgSO4·6H2O grains (45–83 μm) dehydrate to 2% of the original 1.9 μm water band area over ~0.3 Ma at 200 K on Ceres and after ~42 Ma for 147 K. These rates, inferred from an Avrami dehydration model, preclude MgSO4·6H2O as a component of Ceres’ surface, although anhydrous and minimally hydrated sulfates may be present. A comparison between Ceres emissivity spectra and laboratory reflectance measurements over the infrared range (5–17 μm) suggests sulfates cannot be excluded from Ceres’ mineralogy.  相似文献   

6.
High‐energy gamma rays (HEGRs) from Ceres’s surface were measured using Dawn's Gamma Ray and Neutron Detector (GRaND). Models of cosmic‐ray‐initiated gamma ray production predict that the HEGR flux will inversely vary with single‐layer hydrogen concentrations for Ceres‐like compositions. The measured data confirm this prediction. The hydrogen‐induced variations in HEGR rates were decoupled from the measurements by detrending the HEGR data with Ceres single‐layer hydrogen concentrations determined by GRaND neutron measurements. Models indicate that hydrogen‐detrended HEGR counting rates correlate with water‐free average atomic mass, which is denoted as <A>*. HEGR variations across Ceres’s surface are consistent with <A>* variations of ±0.5 atomic mass units. Chemical variations in the CM and CI chondrites, our closest analogs to Ceres’s surface, suggest that <A>* variations on Ceres are primarily driven by variations in the concentration of Fe, although other elements such as Mg and S could contribute. Dawn observations have shown that Ceres’s interior structure and surface composition have been modified by some combination of physical (i.e., ice‐rock fractionation) and/or chemical (i.e., alteration) processes that has led to variations in bulk surface chemistry. Locations of the highest inferred <A>* values, and thus possibly the highest Fe and least altered materials, tend to be younger, less cratered surfaces that are broadly associated with the impact ejecta of Ceres’s largest craters.  相似文献   

7.
Inspired by the recent results of the Dawn mission, thermodynamic models of rock alteration and brine evaporation have been used to help understand the conditions under which water–rock interaction took place within the dwarf planet Ceres. This analysis constrains Ceres's early history and offers a framework within which future observations may be interpreted. A broad range of alteration conditions have been simulated using the Geochemist's Workbench and PHREEQC software, associated with the FREZCHEM model that constrains the consequences of freezing the liquid phase in equilibrium with the observed mineralogical assemblage. Comparison of the modeling results with observed surface mineralogy at Ceres indicates advanced alteration under a relatively high fugacity of hydrogen, a conclusion that is consistent with predictions for, and observations of, large ice‐rich bodies. The simulations suggest production of methane that could help regulate the redox environment and possibly form clathrate hydrates upon freezing of the early ocean. The detection of localized occurrences of natrite (sodium carbonate) at the surface of Ceres provides key constraints on the composition of fluids that are necessarily alkaline. In addition, the combined hydrothermal and freezing simulations suggest that hydrohalite may be abundant in Ceres's subsurface, similar to Earth's polar regions. The global homogeneity of Ceres's surface, made of material formed at depth, suggests a large‐scale formation mechanism, while local heterogeneities associated with impact craters and landslides suggest that some form of sodium carbonate and other salts are accessible in the shallow subsurface.  相似文献   

8.
Abstract– We present a case modeling study of impact crater formation in H2O‐bearing targets. The main goal of this work was to investigate the postimpact thermal state of the rock layers modified in the formation of hypervelocity impact craters. We present model results for a target consisting of a mixture of H2O‐ice and rock, assuming an ice/water content variable with depth. Our model results, combined with results from previous work using dry targets, indicate that for craters larger than about 30 km in diameter, the onset of postimpact hydrothermal circulation is characterized by two stages: first, the formation of a mostly dry, hot central uplift followed by water beginning to flow in and circulate through the initially dry and hot uplifted crustal rocks. The postimpact thermal field in the periphery of the crater is dependent on crater size: in midsize craters, 30–50 km in diameter, crater walls are not strongly heated in the impact event, and even though ice present in the rock may initially be heated enough to melt, overall temperatures in the rock remain below melting, undermining the development of a crater‐wide hydrothermal circulation. In large craters (with diameters more than 100 km or so), the region underneath the crater floor and walls is heated well above the melting point of ice, thus facilitating the onset of an extended hydrothermal circulation. These results provide preliminary constraints in characterizing the many water‐related features, both morphologic and spectroscopic, that high‐resolution images of Mars are now detecting within many Martian craters.  相似文献   

9.
Abstract— A simple analytical solution for subsurface particle motions during impact cratering is useful for tracking the evolution of the transient crater shape at late times. A specific example of such an analytical solution is Maxwell's Z‐Model, which is based on a point‐source assumption. Here, the parameters for this model are constrained using measured ejection angles from both vertical and oblique experimental impacts at the NASA Ames Vertical Gun Range. Data from experiments reveal that impacts at angles as high as 45° to the target's surface generate subsurface flow‐fields that are significantly different from those created by vertical impacts. The initial momentum of the projectile induces a subsurface momentum‐driven flow‐field that evolves in three dimensions of space and in time to an excavation flow‐field during both vertical and oblique impacts. A single, stationary point‐source model (specifically Maxwell's Z‐Model), however, is found inadequate to explain this detailed evolution of the subsurface flow‐field during oblique impacts. Because 45° is the most likely impact angle on planetary surfaces, a new analytical model based on a migrating point‐source could prove quite useful. Such a model must address the effects of the subsurface flow‐field evolution on crater excavation, ejecta deposition, and transient crater morphometry.  相似文献   

10.
A 2‐D numerical study of the evolution of Ceres from a “frozen mudball” to the present era emphasizes the importance of hydrothermal processes. Particulates released as the “frozen mudball” thaws settle to form a roughly 290 km radius core. Hydrothermal flow is driven by radiogenic heating and serpentinization. Both salt‐free and brine fluids are considered. Our modeling suggests that Ceres’s core has been warm over most of its history and is still above freezing, and convective processes are active in core and mantle to the present. The addition of low eutectic solutes greatly expands the region of active convection. A global muddy ocean persists for the first 3 Gyr, and at present, there may be several regional mud seas buried under a frozen crust. Transport of interior material to the near surface occurs throughout our model's history. Eutectic brines drive convective flow to near the surface, even breaching the surface in isolated regions, on the order of 30 km in width, similar in size to some mounds detected using the Dawn visible imaging camera (Sizemore et al. 2015). Surface features such as the bright spot in Occator crater and Ahuna Mons could be the result of eutectic plumes. The CM‐based model density profile is within 10% of Ermakov et al.'s ( 2017 ) results. The model mud mantle has a roughly 42:58 volumetric partitioning of H2O to rock. Our mud model is consistent with the absence of large craters (Marchi et al. 2016 ) and an internal viscosity decreasing with depth (Fu et al. 2017 ).  相似文献   

11.
Abstract— We present numerical simulations of crater formation under Martian conditions with a single near‐surface icy layer to investigate changes in crater morphology between glacial and interglacial periods. The ice fraction, thickness, and depth to the icy layer are varied to understand the systematic effects on observable crater features. To accurately model impact cratering into ice, a new equation of state table and strength model parameters for H2O are fitted to laboratory data. The presence of an icy layer significantly modifies the cratering mechanics. Observable features demonstrated by the modeling include variations in crater morphometry (depth and rim height) and icy infill of the crater floor during the late stages of crater formation. In addition, an icy layer modifies the velocities, angles, and volumes of ejecta, leading to deviations of ejecta blanket thickness from the predicted power law. The dramatic changes in crater excavation are a result of both the shock impedance and the strength mismatch between layers of icy and rocky materials. Our simulations suggest that many of the unusual features of Martian craters may be explained by the presence of icy layers, including shallow craters with well‐preserved ejecta blankets, icy flow related features, some layered ejecta structures, and crater lakes. Therefore, the cratering record implies that near‐surface icy layers are widespread on Mars.  相似文献   

12.
The extent of impact‐generated hydrothermal activity in the 24 km sized Ries impact structure has been controversially discussed. To date, mineralogical and isotopic investigations point to a restriction of hydrothermal activity to the impact‐melt bearing breccias, specifically the crater‐fill suevite. Here, we present new petrographic, geochemical, and isotopic data of postimpact carbonate deposits, which indicate a hydrothermal activity more extended than previously assumed. Specifically, carbonates of the Erbisberg, a spring mound located upon the inner crystalline ring of the crater, show travertine facies types not seen in any of the previously investigated sublacustrine soda lake spring mounds of the Ries basin. In particular, the streamer carbonates, which result from the encrustation of microbial filaments in subaerial spring effluents between 60 and 70 °C, are characteristic of a hydrothermal origin. While much of the primary geochemical and isotopic signatures in the mound carbonates have been obliterated by diagenesis, a postimpact calcite vein from brecciated gneiss of the subsurface crater floor revealed a flat rare earth element pattern with a clear positive Eu anomaly, indicating a hydrothermal fluid convection in the crater basement. Finally, the strontium isotope stratigraphic correlation of the travertine mound with the crater basin succession suggests a hydrothermal activity for about 250,000 yr after the impact, which would be much longer than previously assumed.  相似文献   

13.
We propose a conceptual model to interpret AM/PM high albedo events (HAEs) in crater interiors at the Martian seasonal polar caps. This model consists of two components: (1) a relatively permanent high-albedo water–ice body exposed in a crater interior and (2) a variable crater albedo in response to aerosol optical depth, dust contamination, and H2O/CO2 frost deposits or sublimes in four phases, based on temperature and solar longitude changes. Two craters (Korolev crater of fully exposed water–ice layer and ‘Louth’ crater of partially exposed water–ice layer) are used to demonstrate the model. This model explains the HAEs and their seasonal changes and suggests that many crater-like features formed in the last episodic advance of the polar ice cap in the last high obliquity period should have water–ice exposed or covered. For the AM-only HAEs craters, there seems no need of a water–ice layer to be fully exposed, but a subsurface water–ice layer (or ice-rich regolith) is a necessary condition.  相似文献   

14.
Recent observations of the surface of Mars have shown several fresh mid-latitude craters. Some of these craters show exposed ice (Byrne, S. et al. [2009]. Science 325, 1674-1676.). In some craters, albedo of ice slowly decreases, while in others, it remains nearly constant. We attempt to determine influence of the regolith structure on the rate of sublimation of ice. For this purpose we performed numerical simulations describing evolution of the exposed ice in model craters located at middle latitudes.We consider a new model for the structure and evolution of the material at- and beneath the crater floors. In contrast to the previous study by Dundas and Byrne (Dundas, C.M., Byrne, S. [2010]. Icarus 206, 716-728.) we do not investigate sublimation of dirty ice, and the related formation of a sublimation lag. Instead, we consider sublimation of a pure ice layer on top of layered regolith. In our model the observed reflectivity decreases due to the sublimation-driven changes of the optical properties of thinning clean ice. This offers an alternative to the deposition of the dust embedded in ice (sublimation lag).We have shown that in our model among many parameters affecting ice sublimation rate, volumetric fraction of water ice in the subsurface beneath the crater has the strongest influence. Hence observed darkening of the ice patch on the crater floor might be sufficient to determine the content of water ice in the subsurface. Our calculations show that an albedo decrease of fresh ice patches in mid-latitude craters can be explained by either strong dust sedimentation or, if this is excluded, by sublimation of a thin layer of water ice from the regolith with large thermal inertia. This is consistent with a large volumetric fraction of water ice beneath the crater floor and contributes to evidence for an extended subsurface water reservoir on Mars.The overall conclusion of our work is that a thin post-impact surface ice coating over ice-rich ground beneath the crater floors is consistent with the observations.  相似文献   

15.
Abstract— Although tenuous, the atmosphere of Mars affects the evolution of impact‐generated vapor. Early‐time vapor from a vertical impact expands symmetrically, directly transferring a small percentage of the initial kinetic energy of impact to the atmosphere. This energy, in turn, induces a hemispherical shock wave that propagates outward as an intense airblast (due to high‐speed expansion of vapor) followed by a thermal pulse of extreme atmospheric temperatures (from thermal energy of expansion). This study models the atmospheric response to such early‐time energy coupling using the CTH hydrocode written at Sandia National Laboratories. Results show that the surface surrounding a 10 km diameter crater (6 km “apparent” diameter) on Mars will be subjected to intense winds (?200 m/s) and extreme atmospheric temperatures. These elevated temperatures are sufficient to melt subsurface volatiles at a depth of several centimeters for an ice‐rich substrate. Ensuing surface signatures extend to distal locations (?4 apparent crater diameters for a case of 0.1% energy coupling) and include striations, thermally armored surfaces, and/or ejecta pedestals—all of which are exhibited surrounding the freshest high‐latitude craters on Mars. The combined effects of the atmospheric blast and thermal pulse, resulting in the generation of a crater‐centered erosion‐resistant armored surface, thus provide a new, very plausible formation model for high‐latitude Martian pedestal craters.  相似文献   

16.
Abstract– A model is presented in which the aqueous conditions needed to generate phyllosilicate minerals in the absence of carbonates found in the ancient Noachian crust are maintained by an early CO2‐rich atmosphere, that, together with iron (II) oxidation, would prevent carbonate formation at the surface. After cessation of the internal magnetic dynamo, a CO2‐rich primordial atmosphere was stripped by interactions with the solar wind and surface conditions evolved from humid to arid, with ground waters partially dissolving subsurface carbonate and sulfide minerals to produce acid‐sulfate evaporitic deposits in areas with upwelling ground water. In a subsequent geochemical state (Late Noachian to Hesperian), surface and subsurface acidic solutions were neutralized in the subsurface through interaction with basaltic crust, allowing the precipitation of secondary carbonates. This model suggests that, in the early Noachian, the surface waters of Mars maintained acidity because of a drop in temperature. This would have favored increased dissolution of CO2 and a reduction in atmospheric pressure. In this scenario, physicochemical conditions precluded the formation of surface carbonates, but induced the precipitation of carbonates in the subsurface.  相似文献   

17.
Ceres’ surface has commonly been linked with carbonaceous chondrites (CCs) by ground‐based telescopic observations, because of its low albedo, flat to red‐sloped spectra in the visible and near‐infrared (VIS/NIR) wavelength region, and the absence of distinct absorption bands, though no currently known meteorites provide complete spectral matches to Ceres. Spatially resolved data of the Dawn Framing Camera (FC) reveal a generally dark surface covered with bright spots exhibiting reflectance values several times higher than Ceres’ background. In this work, we investigated FC data from High Altitude Mapping Orbit (HAMO) and Ceres eXtended Juling (CXJ) orbit (~140 m/pixel) for global spectral variations. We found that the cerean surface mainly differs by spectral slope over the whole FC wavelength region (0.4–1.0 μm). Areas exhibiting slopes ?1 constitute only ~3% of the cerean surface and mainly occur in the bright material in and around young craters, whereas slopes ≥?10% μm?1 occur on more than 90% of the cerean surface; the latter being denoted as Ceres’ background material in this work. FC and Visible and Infrared Spectrometer (VIR) spectra of this background material were compared to the suite of CCs spectrally investigated so far regarding their VIS/NIR region and 2.7 μm absorption, as well as their reflectance at 0.653 μm. This resulted in a good match to heated CI Ivuna (heated to 200–300 °C) and a better match for CM1 meteorites, especially Moapa Valley. This possibly indicates that the alteration of CM2 to CM1 took place on Ceres.  相似文献   

18.
Thermal evolution modeling has yielded a variety of interior structures for Ceres, ranging from a modestly differentiated interior to more advanced evolution with a dry silicate core, a hydrated silicate mantle, and a volatile‐rich crust. Here we compute the mass and hydrostatic flattening from more than one hundred billion three‐layer density models for Ceres and describe the characteristics of the population of density structures that are consistent with the Dawn observations. We show that the mass and hydrostatic flattening constraints from Ceres indicate the presence of a high‐density core with greater than a 1σ probability, but provide little constraint on the density, allowing for core compositions that range from hydrous and/or anhydrous silicates to a mixture of metal and silicates. The crustal densities are consistent with surface observations of salts, water ice, carbonates, and ammoniated clays, which indicate hydrothermal alteration, partial fractionation, and the possible settling of heavy sulfide and metallic particles, which provide a potential process for increasing mass with depth.  相似文献   

19.
Shock-induced melting and vaporization of H2O ice during planetary impact events are widespread phenomena. Here, we investigate the mass of shock-produced liquid water remaining within impact craters for the wide range of impact conditions and target properties encountered in the Solar System. Using the CTH shock physics code and the new 5-phase model equation of state for H2O, we calculate the shock pressure field generated by an impact and fit scaling laws for melting and vaporization as a function of projectile mass, impact velocity, impact angle, initial temperature, and porosity. Melt production nearly scales with impact energy, and natural variations in impact parameters result in only a factor of two change in the predicted mass of melt. A fit to the π-scaling law for the transient cavity and transient-to-final crater diameter scaling are determined from recent simulations of the entire cratering process in ice. Combining melt production with π-scaling and the modified Maxwell Z-model for excavation, less than half of the melt is ejected during formation of the transient crater. For impact energies less than about 2 × 1020 J and impact velocities less than about 5 km s−1, the remaining melt lines the final crater floor. However, for larger impact energies and higher impact velocities, the phenomenon of discontinuous excavation in H2O ice concentrates the impact melt into a small plug in the center of the crater floor.  相似文献   

20.
Hale crater, a 125 × 150 km impact crater located near the intersection of Uzboi Vallis and the northern rim of Argyre basin at 35.7°S, 323.6°E, is surrounded by channels that radiate from, incise, and transport material within Hale’s ejecta. The spatial and temporal relationship between the channels and Hale’s ejecta strongly suggests the impact event created or modified the channels and emplaced fluidized debris flow lobes over an extensive area (>200,000 km2). We estimate ∼1010 m3 of liquid water was required to form some of Hale’s smaller channels, a volume we propose was supplied by subsurface ice melted and mobilized by the Hale-forming impact. If 10% of the subsurface volume was ice, based on a conservative porosity estimate for the upper martian crust, 1012 m3 of liquid water could have been present in the ejecta. We determine a crater-retention age of 1 Ga inside the primary cavity, providing a minimum age for Hale and a time at which we propose the subsurface was volatile-rich. Hale crater demonstrates the important role impacts may play in supplying liquid water to the martian surface: they are capable of producing fluvially-modified terrains that may be analogous to some landforms of Noachian Mars.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号