共查询到20条相似文献，搜索用时 31 毫秒
1.
This paper deals with the hydrodynamic analysis of an array of Oscillating Water Column (OWC) devices, made up of coaxial cylinders, which are floating either independently or as a unit forming a floating platform. The platform is considered either free – floating or as TLP configuration connected to the sea bottom. Numerical results concerning the three boundary value problems, namely, the diffraction, the motion – and the pressure – dependent radiation ones are given. They have been obtained through an analytical solution method using matched axisymmetric eigenfunction expansion formulations. In all cases the interaction phenomena with neighbouring bodies have been taken properly into account using the physical idea of multiple scattering. Numerical results for the first – and the mean second – order wave forces, the hydrodynamic interaction coefficients along with pressure hydrodynamic parameters, inner air pressure and free–surface oscillation amplitude inside and outside of each device are parametrically evaluated and supplemented by experimental data. 相似文献
2.
Qi Feng 《Ocean Engineering》2009,36(9-10):681-690
We consider two ship-like bodies connected by six cables and excited by waves. The cables might be under tension, or they might be slack, thus forming a unilateral system generating possible impacts. The impact forces can reach 20,000 kN and are able to cause damage to a ship. In order to avoid such large impact forces, anti-shock buffers might be adopted but good buffer design requires knowledge of the impact forces. We have evaluated these using multi-body theory with unilateral contacts in combination with classical ship dynamics, which allows modeling of the contact dynamics of two floating bodies in an ocean. Based on an optimization algorithm a method using an artificial neural network (NNW) has been developed to determine the combination of possible constraints at each step. The results of a numerical example compare reasonably well with experiments. We have thus established a theoretical basis for further buffer design. 相似文献
3.
Hydrodynamic performance of solid and porous heave plates 总被引：3，自引：0，他引：3
Heave plates have been widely utilized in floating offshore structures as they can provide additional damping and added mass to improve the hydrodynamic response of the system. This study investigates the hydrodynamic characteristics (added mass and damping) of oscillatory solid or porous disks using model scale experiments. All experiments were conducted via forced oscillation model tests using a planar motion mechanism (PMM). The hydrodynamic coefficients of the solid or porous disk obtained from the force measurements are analysed and presented. The sensitivities of the damping and added mass coefficients to both motion amplitude and the disk porosity are examined. 相似文献
4.
Severe hurricanes, such as Katrina, broke the mooring lines of a number of mobile offshore drilling units (MODU) deployed in the Gulf of Mexico and some of those MODUs went adrift. A drifting MODU may damage other critical elements of the offshore oil and gas infrastructure by colliding with floating or fixed production systems and transportation hubs, or by rupturing pipelines owing to their dragging anchors over the seabed. To avoid or mitigate the damage caused by a drifting MODU, it is desirable to understand the mechanics of the drift of a MODU under the impact of severe wind, wave and current and have the capability of predicting the trajectory of the drift. To explore the feasibility and accuracy of predicting the trajectory of a drifting MODU based on hindcast met-ocean conditions and limited knowledge of the condition of the drifting MODU, this study employed a simplified equation describing only the horizontal (surge, sway and yaw) motions of a MODU under the impact of steady wind, current and wave forces. The simplified hydrodynamic model neglects the first- and second-order oscillatory wave forces, unsteady wind forces (owing to wind gustiness), wave drift damping, and the effects of the body oscillation on the steady wind and current forces. It was assumed that the net effects of the oscillatory forces on the steady motion are insignificant. To verify the accuracy and feasibility of our simplified approach, the predicted drifting trajectories of two MODUs were compared with the corresponding measurements recorded by the global positioning system (GPS). 相似文献
5.
M. Söylemez 《Ocean Engineering》1996,23(5):423-445
This paper presents the derivation of a general method for calculating wave forces on the cylindrical members of offshore structures. By means of the proposed method one can calculate the wave loading on cylindrical members of fixed or floating offshore structures orientated randomly in waves. This method of calculating wave forces is based on the linear Airy wave theory. Calculation procedure of wave force components is presented in great detail on the basis of wave particle kinematic properties obtained from the linear Airy wave theory. In the procedure of calculating wave forces presented, definitions of the wave reference system for propagating wave, the structure reference system for the platform and the member reference system for the tubular members of the structure are first established, and then the calculation of wave forces is given in terms of its components, which are pressure, acceleration and velocity forces, including current forces. At the end of the paper, expressions of total heave, sway and surge forces and total roll, pitch and yaw moments acting on the platform are given as a sum of these forces acting on each member of the platform. The calculation procedure derived in this paper provides a very efficient means of calculating wave forces and moments during the time-domain simulations of a floating platform experiencing large amplitude motion in intact, progressive flooding and damaged conditions. Comparisons of the predictions with the measurements which will be presented elsewhere reveal that the calculation procedure developed can predict large amplitude oscillatory and steady motion characteristics of an intact and damaged platform in waves with an acceptable degree of accuracy. 相似文献
6.
Numerical Analysis on the Effects of Submerged Depth of the Grid and Direction of Incident Wave on Gravity Cage 总被引：1，自引：0，他引：1
In this paper,the numerical model of the net cage with the grid mooring system in waves is set up by the lumped mass method and rigid kinematics theory,and then the motion equations of floating system,net system,mooring system,and floaters are solved by the Runge-Kutta fifth-order method.For the verification of the numerical model,a series of physical model tests have been carried out.According to the comparisons between the simulated and experimental results,it can be found that the simulated and experimental results agree well in each condition.Then,the effects of submerged depth of grid and direction of incident wave propagation on hydrodynamic behaviors of the net cage are analyzed.According to the simulated results,it can be found that with the increase of submerged depth of grid,the forces acting on mooring lines and bridle lines increase,while the forces on grid lines decrease;the horizontal motion amplitudes of floating collar decrease obviously,while the vertical motion amplitudes of floating collar change little.When the direction of incident wave propagation changes,forces on mooting lines and motion of net cage also change accordingly.When the propagation direction of incident wave changes from 0° to 45°,forces on the main ropes and bridle ropes increase,while the forces on the grid ropes decrease.With the increasing propagation direction of incident wave,the horizontal amplitude of the forces collar decreases,while the vertical amplitude of the floating collar has little variation. 相似文献
7.
In the present study, a novel method is proposed for the separation of the second-order sum- and difference-frequency wave forces—that is, quadratic transfer functions (QTFs)—on a floating body into three components due to wave–wave, wave–motion, and motion–motion action. By applying the new QTF components, the second-order wave forces on a floating body can be strictly computed in the time domain. In this work, the boundary value problems (BVPs) corresponding to the three kinds of QTF components were derived, and non-homogeneous boundary conditions on the free surface and the body surface were obtained. The second-order diffraction potentials were determined using the boundary integral equation method. In the solution procedure, the highly oscillatory and slowly converging integral on the free surface was evaluated in an accurate and effective manner. Furthermore, the application of the QTF components in the time domain was demonstrated. The second-order exciting forces in the time domain were divided into three parts. Each part of these forces was computed via a two-term Volterra series model based on the incident waves, the first-order motion response, and the QTF components. This method was applied to several numerical examples. The results demonstrated that this decomposition yields satisfactory results. 相似文献
8.
The application of a Smoothed Particle Hydrodynamics (SPH) model to simulate the nonlinear interaction between waves and a moored floating breakwater is presented. The main aim is to predict and validate the response of the moored floating structure under the action of periodic waves. The Euler equations together with an artificial viscosity are used as the governing equations to describe the flow field. The motion of the moored floating body is described using the Newton’s second law of motion. The interactions between the waves and structures are modeled by setting a series of SPH particles on the boundary of the structure. The hydrodynamic forces acting on the floating body are evaluated by summing up the interacting forces on the boundary particles from the neighboring fluid particles. The water surface elevations, the movements of the floating body and the moored forces are all calculated and compared with the available experimental data. Good agreements are obtained for the dynamic response and hydrodynamic performance of the floating body. The numerical results of different immersion depths of the floating body are compared with that of the corresponding fixed body. The effects of the relative length and the density of the structure on the performance of the floating body are analyzed. 相似文献
9.
The coupled system of two side-by-side fixed and/or floating bodies interacting with a large amplitude nonlinear wave is studied using a direct time domain solution method. The numerical model is based on a three-dimensional mixed Eulerian–Lagrangian (MEL) method under certain simplifying approximations permitting Rankine panel scheme to be implemented over a time-invariant boundary surface to solve the boundary value problem for the unknown velocity potentials. A 4th order Adams–Bashforth–Moulton scheme is used for time marching of rigid-body motion histories of the individual bodies and evolution of the free-surface including the gap region in which large resonant fluid motions occur. A systematic study has been carried out to evaluate the performance of the developed time domain method in simulating the forces and motions as well as the fluid motion in the gap region for the two body system under various arrangements and in different wave-headings. At first, the computed numerical results have been validated and verified with computational and experimental results available in literature for standard geometries such as vertical truncated cylinders and rectangular boxes. Secondly, effectiveness of the damping lid model which is introduced to suppress wave resonance in the gap region is investigated including its influence on maximum sway forces on fixed and floating rectangular barges in side-by-side configurations. Thirdly, comparative studies on absolute and relative motion response for two cases (two rectangular barges, and a FLNG-FPSO + shuttle tanker) in side-by-side arrangement are detailed to bring out the importance of nonlinearities arising due to steep nonlinear incident waves. Finally, coupled motions of the two-body system of an FPSO and a shuttle tanker floating in side-by-side configuration in a steep nonlinear wave field are studied in which the two bodies are connected through hawsers, and also the FPSO is moored to the ground. Additionally there is a fender between the two bodies. 相似文献
10.
《海洋技术学报》2023,(4)
海上漂浮式光伏在北方冬季面临被海冰破坏的危险,冰期海洋环境对漂浮式光伏的影响尚处于研究初级阶段,因此非常有必要开展相关研究。为了有效防冰与抗冰,本文从水动力、波浪冲击性、支架稳定性、海水腐蚀、锚固方式等方面入手,首先对光伏方阵总环境载荷进行计算与仿真,然后对集装箱式漂浮防波堤、浮体方阵结构、支架、配件材料及锚固系统等进行优化设计,最后在潮汐变化显著的天津南港近海水域进行了冰期试验。试验数据与结果表明：浮式防波堤能有效阻挡围堰外海冰,消浪效果达到设计要求;塑料螺栓不仅可以有效避免因潮汐产生的浮体松动,而且能抵抗来自高盐高雾环境的腐蚀;设计的锚固系统能有效固定光伏方阵,使其漂移在可控范围内。该试验研究成果为优化北方冰期海上光伏技术方案提供了试验依据与理论支持。 相似文献
11.
Jie Cui Xin Chen Xiaokang Deng Chunyan Ji Qian Li 《Marine Georesources & Geotechnology》2020,38(3):266-276
AbstractIn this paper, series of experimental studies under regular wave actions to investigate the hydrodynamic performance of the rectangular floating breakwater (FB) affected by reefs with different slopes were carried out in a wave flume. The wave transmission coefficients, motion responses and mooring forces can be calculated on the basis of the data obtained from the experiments. A comparative experiment of the only rectangular FB is also conducted. The experimental results reveal that the rectangular FB with different reefs can make more positive effects on wave energy dissipation than that of the only rectangular FB, especially for short-period waves. The characteristics of three degrees of freedom of the rectangular FB affected by reefs are also observed, which can be used to further explain the variation tendency appeared in transmission coefficients. The roll motion of the FB influenced by reefs is intenser than that of the only FB and the changes of slopes have limited effects on the sway motion of the FB. Furthermore, the heave motion of the only rectangular FB is intenser than that of the FB affected by reefs for short-period waves and vice versa for long-period waves. 相似文献
12.
The dynamics of multiple floating structures have been studied using the finite element method. The emphasis is on the hydrodynamic behaviour of multiple bodies under a multi-directional wave field. A two-dimensional numerical model has been adopted to evaluate hydrodynamic coefficients and forces in an oblique wave field. The responses in sway, heave and roll modes are reported. The linear filter technique is then used to extrapolate the responses under directional waves. The effect of mean wave direction and directional homogeneity on the hydrodynamic behaviour of the structure is studied. Based on the present study, it is found that the two-dimensional model is applicable to investigate the wave-structure interaction problems of the type herein considered. 相似文献
13.
Starting from potential theory, this paper presents a new procedure for computing the hydrodynamic forces and six-degrees-of-freedom motion for a semi-submersible platform at an arbitrary heading in waves by using strip theory and linearized viscous damping hypothesis, taking the effects of the free surface and the interaction between main hulls into account. The differential equations of motion for the floating platform are formulated in a new way and the associated computer programs are developed. Comparisons between the theoretical computing results and the full-scale and model-scale experiments show that the present method gives more accurate results than those by previous methods. 相似文献
14.
15.
A Deep Draft Semi-submersible (DDS) under certain flow conditions could be subjected to Vortex-Induced Motions (VIM), which significantly influences the loads on and life fatigue of the moorings and the risers. To investigate the VIM of a DDS with four rectangular section columns in waves coupled with a uniform current, a numerical study using the computational fluid dynamics (CFD) method was conducted. The issues of the VIM of multi-column floaters can be conveniently converted to the issues of oscillating cylinders in fluid cross flows. This paper looks into the CFD numerical simulation of infinite cylinders having rectangular sections in a two-dimensional sinusoidal time-dependent flow field coupled with a uniform current. The resulted hydrodynamic forces and motion responses in different oscillatory flows plus currents both aligned in the same direction for the incidence of 135° of the DDS relative to the flow are compared with the ones in current only cases. The results show that the VIM response of this geometric arrangement of a DDS with four rectangular columns in a current combined with oscillatory flows is more evident than that in the current only case. The oscillatory flows and waves have the significant influence on the VIM response, forces and trajectory, in-plane motions of the DDS. 相似文献
16.
Muhittin Sylemez 《Ocean Engineering》1998,25(4-5)
The purpose of the study was to develop a prediction technique to simulate the motion response of a damaged platform under wave, wind and current forces. The equations of motion were obtained using Newton's second law and the numerical solution technique of non-linear equations of motion is explained for intact and damaged cases. The analysis technique employs large displacement non-linear equations of motion. Solutions were obtained in the time-domain to predict the motion characteristics. In this study, analysis procedures were developed to calculate: (a) wave loading on asymmetrical structural configurations; (b) hydrodynamic reaction forces (inertia or moment of inertia, damping and restoring forces) on asymmetrical shapes. During the damage simulation, change in the mass of the structure as well as wave and hydrodynamic reaction forces, were taken into account. The computer program developed for the time-domain simulation is introduced. In order to avoid slowly decaying transient motions of the structure due to wave excitation forces, an exponential ramp function is used. The application of a ramp function enables a quick convergence in the time-domain solution of equations of motion. Results of a numerical motion simulation program and the experimental studies are also presented in order to make comparisons. Comparison of the test results with the numerical simulations shows good agreement for heave, roll and pitch motions. The formulations and the computational procedures given in this paper provide useful tools for the investigation of the non-linear dynamic stability characteristics of floating structures in waves for intact, damaged and post-flooding conditions in six-degrees of freedom. 相似文献
17.
In this paper, the dynamic response simulation of heavy cargo suspended by a floating crane is performed. The dynamic equations of the motions of the floating crane and the heavy cargo must be considered by the coupled equations because the floating crane and the heavy cargo are connected by wire ropes and provide force and a moment for each other. Hence, the dynamic equations of motion are set up for considering the 6-degrees-of-freedom floating crane and the 6-degrees-of-freedom cargo based on multibody system dynamics. The nonlinear terms in the equations of motion are considered. In addition, the nonlinear hydrostatic force, the linear hydrodynamic force, the wire rope force, and the mooring force are considered as the external forces. Finally, we estimate the motion of the floating crane and the heavy cargo and also calculate the tension of the wire rope between the two. 相似文献
18.
Based on rigid kinematics theory and lumped mass method,a mathematical model of the two net cages of grid mooring system under waves is developed.In order to verify the numerical model,a series of physical model tests have been carried out.According to the comparisons between the simulated and the experimental results,it can be found that the simulated and the experimental results agree well in each wave condition.Then,the forces on the mooring lines and the floating collar movement are calculated under different wave conditions.Numerical results show that under the same condition,the forces on the bridle ropes are the largest,followed by forces on the main ropes and the grid ropes.The horizontal and the vertical float collar motion amplitudes increase with the increase of wave height,while the relationship of the horizontal motion amplitude and the wave period is indistinct.The vertical motion amplitude of the two cages is almost the same,while on the respect of horizontal motion amplitude,cage B(behind cage A,as shown in Fig.4) moves much farther than cage A under the same wave condition.The inclination angle of the floating system both in clockwise along y axis and the counter one enlarges a little with the increase of wave height. 相似文献
19.
The dynamic analysis of a deepwater floating structure is complex due to dynamic coupling between the platform and the moorings/risers. Furthermore, the system response at the incident wave frequency and at the resonant low frequency is coupled due to geometric and hydrodynamic nonlinearities. As such, it is generally held that a fully coupled time-domain analysis should be used for an accurate prediction of the dynamic response. However, in a recent work, it is found that for an ultra-deepwater floating system, a fully coupled frequency-domain analysis can provide highly accurate response predictions. One reason is the accuracy of the drag linearization procedure over the motions at two time scales, another is the minimal geometric nonlinearity of the moorings/risers in deepwater. In this paper, the frequency-domain approach is investigated for intermediate water depths, and it is found that the accuracy reduces substantially as geometric nonlinearity becomes important. Therefore, a novel hybrid approach is developed, in which the low-frequency motion is simulated in the time domain while the wave frequency motion is solved in the frequency domain at regular intervals. Coupling between the two analyses is effected by the fact that (i) the low-frequency motion affects the line geometry for the wave frequency motion, and (ii) the wave frequency motion affects the modeling of the drag forces, which damp the low-frequency motion. The method is found to be nearly as accurate as fully coupled time domain analysis even for a system with a preponderance of nonlinear and coupling effects, but requiring only one-tenth of the computational effort. 相似文献
20.
The deployment of suitable configurations of mutually interacting floating bodies for efficiently controlling their hydrodynamic interactions towards the reduction of the wave drift forces and, thus, of the mooring lines’ loads, has, nowadays, gained a great scientific interest. In this paper, the hydrodynamic behaviour of a floating cylinder and a concentric annular flexible plate is analysed in the frequency domain aiming at the minimization of the drift forces acting on the cylinder by optimizing the flexural rigidity of the plate. The diffraction/radiation problem is solved using a higher-order boundary element method. The analysis is implemented assuming that both floating bodies oscillate freely in heave, while for the plate, flexible modes are, additionally, considered for describing its structural deformations. The required modes shapes are determined in vacuum (“dry” mode superposition approach) through analytical expressions. The flexural rigidity of the plate, D, is optimized at a specific wave number using a real-coded genetic algorithm. Initially, results are compared with numerical results of other investigators for the case of two rigid concentric floating cylinders. Next, extended results are presented, focusing on the effect of D, including its optimum value, on various physical quantities describing the behaviour of both the cylinder and the plate. Contrary to the isolated cylinder, the presence of the plate introduces sharp peaks in the variation pattern of the drift force of the cylinder, bounded at specific wave numbers, where resonance of the seiche mode of water motion in the annular cavity or of specific flexible modes of the plate occurs. However, by reducing D to its optimum value, the cylinder’s drift force obtains practically zero values at the target wave number, due to an efficient improvement of the wave field in the annular cavity around the cylinder. Moreover, a great reduction of the drift force compared to the isolated cylinder is achieved in the subsequent high frequency range. 相似文献