共查询到19条相似文献，搜索用时 250 毫秒
1.
Saman Yaghmaei-Sabegh 《地震工程与工程振动(英文版)》2018,17(1):139-148
Macroseismic intensity data plays an important role in the process of seismic hazard analysis as well in developing of reliable earthquake loss models. This paper presents a physical-based model to predict macroseismic intensity attenuation based on 560 intensity data obtained in Iran in the time period 1975–2013. The geometric spreading and energy absorption of seismic waves have been considered in the proposed model. The proposed easy to implement relation describes the intensity simply as a function of moment magnitude, source to site distance and focal depth. The prediction capability of the proposed model is assessed by means of residuals analysis. Prediction results have been compared with those of other intensity prediction models for Italy, Turkey, Iran and central Asia. The results indicate the higher attenuation rate for the study area in distances less than 70 km. 相似文献
2.
Wang Yayong 《地震工程与工程振动(英文版)》2008,7(3):255-262
Many different types of buildings were severely damaged or collapsed during the May 12, 2008 Great Wenchuan Earthquake. Based on survey data collected in regions that were subjected to moderate to severe earthquake intensities, a comparison between the observed building damage, and the three earthquake performance objectives and seismic conceptual design principles specified by the national ＂Code for Seismic Design of Buildings GB50011-2001,＂ was carried out. Actual damage and predicted damage for a given earthquake level for different types of structures is compared. Discussions on seismic conceptual design principles, with respect to multiple defense lines, strong column-weak beam, link beam of shear walls, ductility detailing of masonry structures, exits and staircases, and nonstructural elements, etc. are carried out. Suggestions for improving the seismic design of structures are also proposed. It is concluded that the seismic performance objectives for three earthquake levels, i.e., ＂no failure under minor earthquake level, ＂＂repairable damage under moderate earthquake level＂ and ＂no collapse under major earthquake level＂ can be achieved if seismic design principles are carried out by strictly following the code requirements and ensuring construction quality. 相似文献
3.
《中国地震研究》1997,(3)
Taking the southern part of the Shanxi Province and the western part of the Sichuan Province as the examples,the seismicity parameters of every potential seismic zone have been determined by the maximum likelihood model with different data based on different magnitude thresholds,depending on the different precision of different earthquake catalogs.According to the general seismic risk analysis model,the seismic intensity zoning for two areas has been obtained. 相似文献
4.
Based on raw data from dams damaged in the Wenchuan earthquake, including many that were severely damaged, characteristics and factors that influenced the damage are discussed in this paper. Findings from this study include: severely damaged dams were densely distributed along the seismologic fault; small dams, especially small earth-rock dams, had the most serious damage that was caused by a variety of factors; the most serious damage was caused by seismic waves; damage was aggregated by aftershocks; and the extent of the damage patterns increased with the seismic intensity. Damage patterns varied in different intensity zones and cracking was the most common type of damage. Most of the dams had a good base with relatively high bearing capacity, and the walls of the earth-rock dams were mostly of clay soil. This type of base and body material mitigated some of the damage to dams. Reservoir maintenance and other factors also have a significant impact on the seismic safety of the dam. Finally, some recommendations to reduce seismic damage to dams are proposed. 相似文献
5.
Seismologists have begun to investigate the earthquake damage and assess the economic losses on the spot in the Yunnan area since the earthquakes with Ms6.7 and Ms6.9 that occurred on the boundary between China and Myanmar west of Menglian county, Yunnan Province, on April 23, 1992. From 1992 to 2003, 50 destructive earthquakes occurred in Yunnan, and large amounts of data on seismic hazard have been accumulated. With focus on the major building structures, the paper makes statistical analysis on the earthquake damage ratio, loss ratio and seismic hazard index in the areas with different seismic intensity of the 50 events, and presents the seismic hazard matrix of buildings for the Yunnan area. 相似文献
6.
The seismotectonic method is used to study the seismogenic structures and the maximum potential earthquake around an engineering site in order to determine the seismic risk at the site. Analysis of seismic risk from site effect seismic intensity data, in combination with regional seismo-geologieal data, using the seismotectonic method can provide a more reliable result. In this paper, taking the area of six reservoir dam sites in western Anhui as an example, we analyze the seismic risk from site effect seismic intensity data in combination with the seismotectonic conditions and find that P (I≥i) = 10% over 50 years. The result shows that the seismogenic structure and the maximum potential earthquake have a controlling effect on seismic risk from future earthquakes in the area around the site. 相似文献
7.
Jin Xueshen Jin Yanping Zhao Jun and Dai YinghuaSeismological Bureau of Hebei Province Shijiazhuang China 《中国地震研究》1995,(3)
Based on the site historical earthquake data,a method of seismic risk analysis is presented.Once the frequency of earthquake response intensity and the relative value showed a logarithmic linear,the maximum similarity method would be used to obtain β,λ,and Imax,and also achieve the results of risk analysis on each site.At the same time,the "logic tree" method can be used to calibrate the uncertainty of the risk on each site.Then the final results of risk analysis indicate that this method is feasible,particularly for the sites showing intensity anomaly. 相似文献
8.
This paper provides an overview of the ideas and methods of the assessment of seismic intensity based on remote sensing and describes the models used to assess the remote sensing based synthetic seismic damage index and seismic intensity. With the data of damage information extracted from the high-resolution aerial images in the earthquake-stricken areas （Jiegu town, Yushu city, Qinghai） of the 2010 Ms7. 1 Yushu earthquake, and the data obtained through post-earthquake field investigation, the seismic damage degree and seismic intensity have been estimated. The analysis of the results shows that the seismic intensity in Yushu city is estimated as IX through the RS assessment method, which is consistent with the result estimated according to the ground surveys. The results are discussed in the last part of the paper and indicate that the RS techniques are expected to be one of the main methods used to estimate the seismic intensity values in the emergency stage. 相似文献
9.
The distribution of the intensity of the Mojiang M_S5.9 earthquake in Yunnan Province is expounded, and the damage characteristics of buildings and the damage ratio and seismic damage index of various building structures in each intensity area are compared with those of The Chinese Seismic Intensity Scale. The main basis and method of seismic intensity assessment are discussed in this paper. It is concluded that: ① The seismic intensity should be based on the earthquake damage of the housing structure, which takes up a high ratio in the seismic intensity assessment. It is recommended that seismic intensity is estimated by calculating the average seismic damage index. ② The highest intensity of the Mojiang M_S5.9 earthquake is Ⅷ degrees, with the long axis trending in the north-west direction. The area above Ⅶ degrees is 5,180 km~2. ③ The intensity distribution of the Mojiang M_S5.9 earthquake meets the national standard and the distribution law of seismic intensity in Yunnan. 相似文献
10.
In this paper, we calculated the seismic pattern of instrumental recorded small and moderate earthquakes near the epicenter of the 1303 Hongtong M=8 earthquake, Shanxi Province. According to the spatial distribution of small and moderate earthquakes, 6 seismic dense zones are delineated. Temporal distribution of ML≥2 earthquakes since 1970 in each seismic dense zone has been analyzed. Based on temporal distribution characteristics and historical earthquake activity, three types of seismicities are proposed. The relationship between seismic types and crustal medium is analyzed. The mechanism of three types is discussed. Finity of strong earthquake recurrence is proposed. Seismic hazard in mid-long term and diversity of earthquake disaster in Shanxi seismic belt are discussed. 相似文献
11.
Jeen-Hwa Wang 《地震学报(英文版)》2013,(6):373-376
The correlation of the scaled energy,e = Es/ Mo, versus earthquake magnitude, Ms, is studied based on two models： （1） Model 1 based on the use of the time function of the average displacements, with a ω^-2 source spectrum, across a fault plane; and （2） Model 2 based on the use of the time function of the average displacements, with a ω^-3 source spectrum, across a fault plane. For the second model, there are two cases： （a） As ζ= T, where r is the rise time and T the rupture time, lg（e） - -Ms; and （b） As ζ 〈〈 T, lg（e）- -（1/2）Ms. The second model leads to a negative value of e. This means that Model 2 cannot work for studying the present problem. The results obtained from Model 1 suggest that the source model is a factor, yet not a unique one, in controlling the correlation of e versus Ms. 相似文献
12.
1调查经过1933年8月25日大约在下午2时半,四川茂县之北叠溪,忽然发生大地震,即时间附近群山崩倒,叠溪城全部毁灭,岷江断流。叠溪周围30里内,属于强烈地震区,在这一范围内,任何房屋庐舍,全部破坏,群山崖壁,全部崩坍。在叠溪圆径百里之内,所有道路都被破坏,不能通行。邮电线路,全部不通。当时只知茂汶 相似文献
13.
以中国知网期刊全文数据库（CNKI）和维普科技期刊全文数据库为基础,统计分析了四川省地震局1992～2011年期间发表的地震期刊中文学术论文的情况。四川省地震局20年间共计发表论文1171篇,平均每年产出地震期刊学术论文58．5篇,以四川省地震局为第一署名单位论文925篇,平均每年46篇,论文数量逐年分布呈上升趋势,且与强震活动相关;论文刊载于74种中文科技期刊,总频次大于20次的高频期刊有8个;论文基金资助率逐年增加。论文统计结果显示四川地震科技研究工作一直在持续进步,在科技发展的主动性和创新性以及基层台站科研方面需进一步加强。 相似文献
14.
In this paper, using the 1999 ~ 2007 GPS velocity field data, and by choosing the optimal block model, we obtained the deformation models applicable to the boundary zones of major blocks and the slip rates of block boundary faults on the mid-southern segment of the North-South Seismic Belt. The results show that： on the Longmenshan fault zone, the tensional and compressive slip rate is small on the Baoxing-Wenchuan segment, about 0. 5 ~ 1.8mm·a^-1, and the rate is relatively significant on the segment of the Wenchuan--Maoxian, as 1.8 ~3.8mm·a^-1; on the Xianshuihe fault belt, there is a certain difference in spatial distribution between the tensional slip rag.e and strike-slip rate： the tensional slip rate （ 8. lmm~a-1） is bigger than the sinistral strike-slip rate （ 4.8mm·a^-1） at the north of the Luhuo region; the tension and compression slip rate is basically the same as the strike-slip rate at Luhuo-Dawu; the Dawu-Kangding section presents a trend of decreased strike-slip rate and increased tensional slip rate; the Kangding-ghimian segment shows a strike-slip nature; the strike-slip rate is significantly greater than the tension/compression rate on the Xiaojiang fault zone; the slip rate on the Red River fault zone shows obvious spatial segmentation, the slip rate is smaller in its northwest part, but with a certain amount of tensional/compression component, 4. 7mm·a^-1 on the Jingdong segment. The segment east of Jingdong （ western Gejiu） is mainly of strike-slip, with a slip rate of 4. 5mm·a^-1. 相似文献
15.
Based on faults surveying and research data in the Tianjin offshore areas, through studying tectonic structure, Quaternary activity, deep structure, stress and strain fields and seismicity in the Tianjin offshore areas, the activity and tectonic features of the faults are determined synthetically. Using seismo-geological data, and the historical and modern seismicity data, the frequency-magnitude relationship model normalized by 500a is established and based on the relationship between the upper limit of maximum magnitude Mu and at/b, the maximum magnitudes of the sea section of the Haihe river fault and the Haiyi fault are calculated. Then Poisson probability model is adopted and the quantitative parameters, such as the maximum magnitude, occurrence probability, recurrence cycle of the faults in the south Tianjin offshore areas in the coming 50 - 200a, are calculated. 相似文献
16.
Monitoring of subsurface fluid （underground fluid） is an important part of efforts for earthquake prediction in China. The nationwide network, which monitors groundwater level, water temperature, and radon and mercury in groundwater, has been constructed in the last decades. Large amounts of abnormal fluid changes before and after major earthquakes have been recorded, providing precious data for research in earthquake sciences. Many studies have been done in earthquake fluid hydrogeology in order to probe the nature of the earthquake. Much progress in earthquake fluid hydrogeology has been made in the last decades. The paper provides a review of the advances in research on earthquake fluid hydrogeology over the last 40 years in China. It deals with the following five aspects： （1） an introduction to the development history of monitoring networks construction; （2） cases of different subsurface fluid changes recorded before some major earthquakes which occurred in the last decades; （3） characteristics of subsurface fluid changes following major earthquakes; （4） mechanism of subsurface fluid changes before and following earthquakes; （5） application of earthquake fluids in the hydrogeology field. 相似文献
17.
In general, earthquake cycle related to earthquake faulting could include four major processes which could be described by(1) fault locking,(2) self-acceleration or nucleation(possible foreshocks),(3) coseismic slip, and(4) post-stress relaxation and afterslip. A sudden static stress change/perturbation in the surrounding crust can advance/ delay the fault instability or failure time and modify earthquake rates. Based on a simple one-dimensional spring-slider block model with the combination of rate-and-statedependent friction relation, in this study, we have approximately derived the simple analytical solutions of clock advance/delay of fault failures caused by a sudden static Coulomb stress change applied in the different temporal evolution periods during an earthquake faulting. The results have been used in the physics-based explanation of delayed characteristic earthquake in Parkfield region, California, in which the next characteristic earthquake of M 6.0 after 1966 occurred in 2004 instead of around 1988 according to its characteristic return period of 22 years. At the same time, the analytical solutions also indicate that the time advance/ delay in Coulomb stress change derived by the dislocation model has a certain limitation and fundamental flaw. Furthermore, we discussed the essential difference between rate- and state-variable constitutive(R–S) model and Coulomb stress model used commonly in current earthquake triggering study, and demonstrated that, in fact, the Coulomb stress model could be involved in the R–S model. The results, we have obtained in this study, could be used in the development of time-dependent fault interaction model and the probability calculation related to the time-dependent and renewal earthquake prediction model. 相似文献
18.
It is of great significance to make comparative analyses of seismic fortification criteria at home and abroad for improving the anti-seismic capability of electrical equipment and revising the relevant national standards. A brief overview of American, Japanese, IEC standards and Chinese seismic design codes for electrical equipment is presented. Differences between these seismic fortification standards of electrical equipment are compared and analyzed in respect of the goal and level of seismic fortification and the seismic design spectrum. The advantages and disadvantages of Chinese standards are pointed out. Through learning from foreign experience on the determination of seismic fortification standards, recommendations are made for the improvement and revision of Chinese seismic fortification standards for electrical equipment. 相似文献
19.
The earthquake occurred in Lushan County on 20 April, 2013 caused heavy casualty and economic loss. In order to understand how the seismic energy propagates during this earthquake and how it causes the seismic haz- ard, we simulated the strong ground motions from a rep- resentative kinematic source model by Zhang et al. （Chin J Geophys 56（4）：1408-1411, 2013） for this earthquake. To include the topographic effects, we used the curved grids finite difference method by Zhang and Chen （Geophys J Int 167（1）：337-353, 2006）, Zhang et al. （Geophys J Int 190（1）：358-378, 2012） to implement the simulations. Our results indicated that the majority of seismic energy con- centrated in the epicentral area and the vicinal Sichuan Basin, causing the XI and VII degree intensity. Due to the strong topographic effects of the mountain, the seismic intensity in the border area across the northeastern of Boxing County to the Lushan County also reached IX degree. Moreover, the strong influence of topography caused the amplifications of ground shaking at the moun- tain ridge, which is easy to cause landslides. These results are quite similar to those observed in the Wenchuan earthquake of 2008 occurred also in a strong topographic mountain area. 相似文献