首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 140 毫秒
1.
A 10-station portable seismograph network was deployed in northern Greece to study aftershocks of the magnitude (mb) 6.4 earthquake of June 20, 1978. The main shock occurred (in a graben) about 25 km northeast of the city of Thessaloniki and caused an east-west zone of surface rupturing 14 km long that splayed to 7 km wide at the west end. The hypocenters for 116 aftershocks in the magnitude range from 2.5 to 4.5 were determined. The epicenters for these events cover an area 30 km (east-west) by 18 km (north-south), and focal depths ranges from 4 to 12 km. Most of the aftershocks in the east half of the aftershock zone are north of the surface rupture and north of the graben. Those in the west half are located within the boundaries of the graben. Composite focalmechanism solutions for selected aftershocks indicate reactivation of geologically mapped normal faults in the area. Also, strike-slip and dip-slip faults that splay off the western end of the zone of surface ruptures may have been activated.The epicenters for four large (M 4.8) foreshocks and the main shock were relocated using the method of joint epicenter determination. Collectively, those five epicenters form an arcuate pattern convex southward, that is north of and 5 km distant from the surface rupturing. The 5-km separation, along with a focal depth of 8 km (average aftershock depth) or 16 km (NEIS main-shock depth), implies that the fault plane dips northward 58° or 73°, respectively. A preferred nodal-plane dip of 36° was determined by B.C. Papazachos and his colleagues in 1979 from a focal-mechanism solution for the main shock. If this dip is valid for the causal fault and that fault projects to the zone of surface rupturing, a decrease of dip with depth is required.  相似文献   

2.
Following a large-sized Bhuj earthquake (M s = 7.6) of January 26th, 2001, a small aperture 4-station temporary local network was deployed, in the epicentral area, for a period of about three weeks and resulted in the recording of more than 1800 aftershocks (-0.07 ≤M L <5.0). Preliminary locations of epicenters of 297 aftershocks (2.0 ≤M L <5.0) have brought out a dense cluster of aftershock activity, the center of which falls 20 km NW of Bhachau. Epicentral locations of after-shocks encompass a surface area of about 50 × 40 km2 that seems to indicate the surface projection of the rupture area associated with the earthquake. The distribution of aftershock activity above magnitude 3, shows that aftershocks are nonuniformly distributed and are aligned in the north, northwest and northeast directions. The epicenter of the mainshock falls on the southern edge of the delineated zone of aftershock activity and the maximum clustering of activity occurs in close proximity of the mainshock. Well-constrained focal depths of 122 aftershocks show that 89% of the aftershocks occurred at depths ranging between 6 and 25 km and only 7% and 4% aftershocks occur at depths less than 5 and more than 25 km respectively. The Gutenberg-Richter (GR) relationship, logN = 4.52 - 0.89ML, is fitted to the aftershock data (1.0<-M L<5.0) and theb-value of 0.89 has been estimated for the aftershock activity.  相似文献   

3.
A 12-station temporary microearthquake network was established by the Geological Survey of India for aftershock monitoring of the January 26th, 2001 Bhuj earthquake (M w 7.6) in the Kutch district of Gujarat state, western India. The epicentres of the aftershocks show two major trends: one in the NE direction and the other in the NW direction. Fault-plane solutions of the best-located and selected cluster of events that occurred along the NE trend, at a depth of 15–38 km, show reverse faulting with a large left-lateral strike-slip motion, which are comparable with the main-shock solution. The NW trending upper crustal aftershocks at depth <10 km, on the other hand, show reverse faulting with right-lateral strike-slip motion, and the mid crustal and lower crustal aftershocks, at a depth of 15–38 km, show pure reverse faulting as well as reverse faulting with right-lateral and left-lateral strike-slip motions; these solutions are not comparable with the main-shock solution. It is inferred that the intersection of two faults has been the source area for stress concentration to generate the main shock and the aftershocks.  相似文献   

4.
On November 30, 1967, a strong earthquake of magnitude M = 6.6 struck the Dibra region, eastern Albania, causing considerable loss of human life and grave material damage both in the territory of Albania and that of Yugoslavia.The object of this study is to describe the effects of this earthquake on landscape and buildings, as well as to define its macroseismic field. The study further deals with some features of the aftershocks of M 4.0 distributed in time and space, the aftershock activity and the focal-mechanism solution of the main event.From the study of the macroseismic field of this earthquake and its fault, which extends over 10 km in a 40° northeasterly direction, from the distribution of aftershocks in space and the focal-mechanism solution of this earthquake, the conclusion has been reached that this event is connected with the Vlora—Dibra seismogenic belt.The authors have mentioned the existence of this traverse belt as early as 1969 (Sulstarova and Koçiaj, 1969). The existence of this belt is also shown by the chronological and geographical distribution of some strong earthquakes in Albania in the period 1800–1967 (their macroseismic field and the position of their epicentres), and by the focal-mechanism solutions of some of these earthquakes. The Vlora—Elbasan—Dibra transverse seismogenic belt continues for several hundred kilometres northeast and southwest beyond the territory of Albania.  相似文献   

5.
P. Mandal  S. Horton   《Tectonophysics》2007,429(1-2):61-78
The HYPODD relocation of 1172 aftershocks, recorded on 8–17 three-component digital seismographs, delineate a distinct south dipping E–W trending aftershock zone extending up to 35 km depth, which involves a crustal volume of 40 km × 60 km × 35 km. The relocated focal depths delineate the presence of three fault segments and variation in the brittle–ductile transition depths amongst the individual faults as the earthquake foci in the both western and eastern ends are confined up to 28 km depth whilst in the central aftershock zone they are limited up to 35 km depth. The FPFIT focal mechanism solutions of 444 aftershocks (using 8–12 first motions) suggest that the focal mechanisms ranged between pure reverse and pure strike slip except some pure dip slip solutions. Stress inversion performed using the P and T axes of the selected focal mechanisms reveals an N181°E oriented maximum principal stress with a very shallow dip (= 14°). The stress inversions of different depth bins of the P and T axes of selected aftershocks suggest a heterogeneous stress regime at 0–30 km depth range with a dominant consistent N–S orientation of the P-axes over the aftershock zone, which could be attributed to the existence of varied nature and orientation of fractures and faults as revealed by the relocated aftershocks.  相似文献   

6.
We observe the spatial distributions of the magnitude of aftershocks following the six earthquakes of focal depth shallower than 20 km with magnitude more than 5.0 from 1983 to 1987 in Japan. The upper limit of the aftershock magnitude is examined as a function of the distance from mainshock hypocentre. The observed spatial distributions of the upper limit are bimodal, with a tendency of the upper limit to decrease as the distance from mainshock hypocentre increases. Moreover, we observe the correlations between the aftershock spatial distribution and earthquake fault length. We focus on the largest aftershocks in each of two aftershock sequences constituting the bimodal distribution. The distances of the two largest aftershocks from the mainshock hypocentre are equal to the fault lengths of shallow earthquakes in Japan and to the maximum earthquake fault lengths.  相似文献   

7.
The Geological Survey of India (GSI) established a twelve-station temporary microearthquake (MEQ) network to monitor the aftershocks in the epicenter area of the Bhuj earthquake (M w7.5) of 26th January 2001. The main shock occurred in the Kutch rift basin with the epicenter to the north of Bhachao village, at an estimated depth of 25 km (IMD). About 3000 aftershocks (M d ≥ 1.0), were recorded by the GSI network over a monitoring period of about two and half months from 29th January 2001 to 15th April 2001. About 800 aftershocks (M d ≥ 2.0) are located in this study. The epicenters are clustered in an area 60 km × 30 km, between 23.3‡N and 23.6‡N and 70‡E and 70.6‡E. The main shock epicenter is also located within this zone. Two major aftershock trends are observed; one in the NE direction and other in the NW direction. Out of these two trends, the NE trend was more pronounced with depth. The major NE-SW trend is parallel to the Anjar-Rapar lineament. The other trend along NW-SE is parallel to the Bhachao lineament. The aftershocks at a shallower depth (<10km) are aligned only along the NW-SE direction. The depth slice at 10 km to 20 km shows both the NE-SW trend and the NW-SE trend. At greater depth (20 km–38 km) the NE-SW trend becomes more predominant. This observation suggests that the major rupture of the main shock took place at a depth level more than 20 km; it propagated along the NE-SW direction, and a conjugate rupture followed the NW-SE direction. A N-S depth section of the aftershocks shows that some aftershocks are clustered at shallower depth ≤ 10 km, but intense activity is observed at 15–38 km depth. There is almost an aseismic layer at 10–15 km depth. The activity is sparse below 38 km. The estimated depth of the main shock at 25 km is consistent with the cluster of maximum number of the aftershocks at 20–38 km. A NW-SE depth section of the aftershocks, perpendicular to the major NE-SW trend, indicates a SE dipping plane and a NE-SW depth section across the NW-SE trend shows a SW dipping plane. The epicentral map of the stronger aftershocksM ≥ 4.0 shows a prominent NE trend. Stronger aftershocks have followed the major rupture trend of the main shock. The depth section of these stronger aftershocks reveals that it occurred in the depth range of 20 to 38 km, and corroborates with a south dipping seismogenic plane.  相似文献   

8.
Seismogenesis of aftershocks occurring in the Kachchh seismic zone for more than last 10?years is investigated through modeling of fractal dimensions, b-value, seismic velocities, stress inversion, and Coulomb failure stresses, using aftershock data of the 2001 Bhuj earthquake. Three-dimensional mapping of b-values, fractal dimensions, and seismic velocities clearly delineate an area of high b-, D-, and Vp/Vs ratio values at 15?C35?km depth below the main rupture zone (MRZ) of the 2001 mainshock, which is attributed to higher material heterogeneities in the vicinity of the MRZ or deep fluid enrichment due to the release of aqueous fluid/volatile CO2 from the eclogitisation of the olivine-rich lower crustal rocks. We notice that several aftershocks are occurred near the contacts between high (mafic brittle rocks) and low velocity regions while many of the aftershocks including the 2001 Bhuj mainshock are occurred in the zones of low velocity (low dVp, low dVs and large Vp/Vs) in the 15?C35?km depth range, which are inferred to be the fractured rock matrixes filled with aqueous fluid or volatiles containing CO2. Further support for this model comes from the presence of hydrous eclogitic layer at sub-lithospheric depths (34?C42?km). The depth-wise stress inversions using the P- and T-axes data of the focal mechanisms reveal an increase in heterogeneity (i.e., misfit) with an almost N?CS ??1 orientation up to 30?km depth. Then, the misfit decreases to a minimum value in the 30?C40?km depth range, where a 60o rotation in the ??1 orientation is also noticed that can be explained in terms of the fluid enrichment in that particular layer. The modeling of Coulomb failure stress changes (??CFS) considering three tectonic faults [i.e., NWF, GF, and Allah bund fault (ABF)] and the slip distribution of the 2001 mainshock on NWF could successfully explain the occurrences of moderate size events (during 2006?C2008) in terms of increase in positive ??CFS on GF and ABF. In a nutshell, we propose that the fluid-filled mafic intrusives are acting as stress accentuators below the Kachchh seismic zone, which generate crustal earthquakes while the uninterrupted occurrence of aftershocks is triggered by stress transfer and aqueous fluid or volatile CO2 flow mechanisms. Further, our results on the 3-D crustal seismic velocity structure, focal mechanisms, and b-value mapping will form key inputs for understanding wave propagation and earthquake hazard-related risk associated with the Kachchh basin.  相似文献   

9.
This paper presents the computation of time series of the 22 July 2007 M 4.9 Kharsali earthquake. It occurred close to the Main Central Thrust (MCT) where seismic gap exists. The main shock and 17 aftershocks were located by closely spaced eleven seismograph stations in a network that involved VSAT based real-time seismic monitoring. The largest aftershock of M 3.5 and other aftershocks occurred within a small volume of 4 × 4 km horizontal extent and between depths of 10 and 14 km. The values of seismic moment (M ∘) determined using P-wave spectra and Brune’s model based on f 2 spectral shape ranges from 1018 to 1023 dyne-cm. The initial aftershocks occurred at greater depth compared to the later aftershocks. The time series of ground motion have been computed for recording sites using geometric ray theory and Green’s function approach. The method for computing time series consists in integrating the far-field contributions of Green’s function for a number of distributed point source. The generated waveforms have been compared with the observed ones. It has been inferred that the Kharsali earthquake occurred due to a northerly dipping low angle thrust fault at a depth of 14 km taking strike N279°E, dip 14° and rake 117°. There are two regions on the fault surface which have larger slip amplitudes (asperities) and the rupture which has been considered as circular in nature initiated from the asperity at a greater depth shifting gradually upwards. The two asperities cover only 10% of the total area of the causative fault plane. However, detailed seismic imaging of these two asperities can be corroborated with structural heterogeneities associated with causative fault to understand how seismogenesis is influenced by strong or weak structural barriers in the region.  相似文献   

10.
The Van earthquake (M W 7.1, 23 October 2011) in E-Anatolia is typical representative of intraplate earthquakes. Its thrust focal character and aftershock seismicity pattern indicate the most prominent type of compound earthquakes due to its multifractal dynamic complexity and uneven compressional nature, ever seen all over Turkey. Seismicity pattern of aftershocks appears to be invariably complex in its overall characteristics of aligned clustering events. The population and distribution of the aftershock events clearly exhibit spatial variability, clustering-declustering and intermittency, consistent with multifractal scaling. The sequential growth of events during time scale shows multifractal behavior of seismicity in the focal zone. The results indicate that the extensive heterogeneity and time-dependent strength are considered to generate distinct aftershock events. These factors have structural impacts on intraplate seismicity, suggesting multifractal and unstable nature of the Van event. Multifractal seismicity is controlled by complex evolution of crustal-scale faulting, mechanical heterogeneity and seismic deformation anisotropy. Overall seismicity pattern of aftershocks provides the mechanism for strain softening process to explain the principal thrusting event in the Van earthquake. Strain localization with fault weakening controls the seismic characterization of Van earthquake and contributes to explain the anomalous occurrence of aftershocks and intraplate nature of the Van earthquake.  相似文献   

11.
The aftershock sequence of the September 30th, 1993 Killari earthquake in the Latur district of Maharashtra state, India, recorded by 41 temporary seismograph stations are used for estimating 3-D velocity structure in the epicentral area. The local earthquake tomography (LET) method of Thurber (1983) is used. About 1500P and 1200S wave travel-times are inverted. TheP andS wave velocities as well asV P/VSratio vary more rapidly in the vertical as well as in the horizontal directions in the source region compared to the adjacent areas. The main shock hypocentre is located at the junction of a high velocity and a low velocity zone, representing a fault zone at 6–7 km depth. The estimated average errors ofP velocity andV P/VSratio are ±0.07 km/s and ±0.016, respectively. The best resolution ofP and S-wave velocities is obtained in the aftershock zone. The 3-D velocity structure and precise locations of the aftershocks suggest a ‘stationary concept’ of the Killari earthquake sequence.  相似文献   

12.
Eyidogan  Nalbant  Barka  & King 《地学学报》1999,11(1):38-44
The 1924 Pasinler & 1983 Horasan-Narman earthquakes which struck the Erzurum region occurred on the NE–SW-trending Horasan fault zone about 60 km east of Erzurum basin. The inversion of teleseismic seismograms, the aftershock pattern and the surface faulting of the 30 October 1983 ( M s = 6.8) Horasan-Narman earthquake indicate that it had dominantly left-lateral motion. One moderately sized aftershock occurred 8 h after the main event and two others a year later on the NE extension of the fault zone. The aftershock distribution dominantly overlapped with the Horasan fault zone, and the aftershocks also migrated from south-west to north-east within the year following the mainshock. The results obtained from modelling of static stress changes caused by the 1983 earthquake are consistent with the spatial distribution of aftershocks. Macroseismic observations of the 1924 earthquake ( M s = 6.8) indicated that this event occurred on the SW extension of the Horasan fault zone. Static stress modelling of the 1924 earthquake, by using the same input parameters of the 1983 event, has shown that its occurrence increased the stress in the region of the 1983 rupture zone. The static stress changes caused both by the 1924 and the 1983 earthquakes has increased the failure stress at the NE and SW extensions of the Horasan fault zone and in Narman area. Furthermore, the stress has decreased in the vicinity of the Erzurum fault zone, east of the city of Erzurum, the largest city in eastern Turkey, and in the populated Sarikamis area. This might delay the occurrence of a future probable damaging earthquake in these areas.  相似文献   

13.
The 20 October 1991 Uttarkashi earthquake killed over a thousand people and caused extensive damage to property in the Garhwal Himalaya region. The body wave magnitude of the earthquake was 6.6, and the fault plane solution indicates reverse faulting. The hypocenrre was located at a focal depth of about 12 km between the Chail and Jutogh Thrusts, but movement propagated southward along the Jamak–Gangori Fault (JGF) and Dunda fault (DF) which are developed as blind faults related to the growing Uttarkashi antiform.  相似文献   

14.
A large earthquake of magnitude MW = 6.3 occurred on 14 August 2003 NW of the Lefkada Island, which is situated at the Ionian Sea (western Greece). The source parameters of this event are determined using body-wave modeling. The focal depth was found equal to 9 km, the constrained focal mechanism revealed dextral strike–slip motion (φ = 15°, Δ = 80° and λ = 170°), the duration of the source time function was 8 s and the seismic moment 2.9 × 1025 dyn cm. The earthquake occurred close to the northern end of the Kefallinia transform fault, where the 1994 moderate event and its aftershock sequence were also located. The epicentral distribution of the 2003 aftershock sequence revealed the existence of two clusters. The first one is located close to the epicentral area of the mainshock, while the second southern, close to the northwestern coast of the Kefallinia Island. A gap of seismicity is observed between the two clusters. The length of the activated zone is approximately 60 km. The analysis of data revealed that the northern cluster is directly related to the mainshock, while the southern one was triggered by stress transfer caused by the main event.  相似文献   

15.
A catalogue of aftershocks of the 2007 Nevelsk earthquake (M w = 6.2) was prepared on the basis of the data from the local network of digital seismic stations established on the southern part of Sakhalin Island. The parameters of the aftershock hypocenters were determined using the method of the seismic wave travel time inversion. The errors in the determination of the coordinates of the seismic events were analyzed. The particularities of the spatiotemporal distribution of the aftershocks in the source zone of the earthquake were established. It was shown that a strong aftershock was a subsource earthquake with its own source zone. This explains the disagreement between the energetic characteristics and the size of the aftershock zone of the Nevelsk earthquake.  相似文献   

16.
The August 1, 1975 earthquake near Oroville, California, occurred along the Sierra foothills in a region characterized by occasional moderate earthquakes. Several earthquakes in the general region, including those in 1869, 1875, and 1909, appear to have had significant aftershock sequences. The general character of the aftershock sequence of the Oroville earthquake thus does not appear to be anomalous when measured against the known seismic history of this area.

Four smoked-paper micro-earthquake recorders were deployed immediately following the occurrence of the main earthquake to attempt to define the structural associations of the principal earthquake by location and analysis of aftershocks. Focal locations for 243 micro-earthquakes in the magnitude range of 1–3 were selected from the 30-day period (August 2–September 1), during which monitoring was continued. The aftershocks clearly define a planar surface striking north–south and dipping west at 62° from the surface to a depth of about 12 km. Aftershocks during the first two days of monitoring defined a surface of active faulting of approximately 100 km2. Extension of this surface both to the north and south began on August 5 at focal depths of 5–10 km, resulting in a total ruptured area of approximately 125 km2. The number of aftershocks per day decreased at the rate oft−1.1, but the decay curve was punctuated by several secondary aftershock sequences. No. direct relationship between the aftershock sequence and the presence of Oroville Reservoir was observed.  相似文献   


17.
The devastating earthquake (mb = 6.6) at Chamoli, Garhwal Himalaya, which occurred in the morning hours on 29th March 1999, was recorded on Delhi Strong Motion Accelerograph (DSMA) Network operated by the Central Building Research Institute, Roorkee. In this paper the source parameters of this event calculated from the Strong Motion Data are presented. The seismic moment for this event has been found to be of the order of 1025 dyne.cm and the moment magnitude has been calculated in the range of 6.53–6.69 at different stations. The stress drop and source radius for the earthquake are also calculated.  相似文献   

18.
The earthquake (Ms= 5.3) of 20 March 1992 and its aftershocks, which occurred near the volcanic island complex of Milos, South Aegean, Greece, are studied on the basis of filed observations and instrumental data. The mainshock caused some building damage, the maximum intensity of VI+ (MM) being assigned to Triovasalos, Milos. Ground cracks, liquefaction in soil, landslides and rockfalls were observed in Milos. Liquefaction took place at an apparently anomalously long epicentral distance (D= 12 km) and is associated with unusually small earthquake magnitude. Abnormal animal behaviour was reported no longer than twelve hours before the mainshock. The b-value (= 1.02) of the G–R relation for the aftershock sequence, the exponentially decreasing number of aftershocks with time, and the difference (= 0.5) in magnitude between the mainshock and its largest aftershock imply that the origin of these earthquakes is tectonic and not associated with the volcanic field of Milos.  相似文献   

19.
The November 27, 2005 Qeshm Island earthquake (Mw 6.0) occurred along the Zagros Thrust and Fold Belt which accommodates about half of the deformation caused by the Arabian and Eurasian Plates convergence. As typical for the belt, the earthquake was associated with buried reverse faulting and produced no surface rupture. Here, teleseismic broadband P velocity waveforms of the earthquake are inverted to obtain coseismic finite-fault slip distribution of the earthquake. It is obtained that rupture was controlled by failure of a single asperity with largest displacement of approximately 0.6 m, which occurred at a depth of 9 km. The slip model indicated radial rupture propagation from the hypocentre and confirmed blind reverse faulting within deeper part (below the depth of 6 km) of the sedimentary cover above the Hormuz Salt, lying between the cover and the basement, releasing a seismic moment of about 1.3?×?1018 Nm (MW?=?6.0). The results also confirm that the Hormuz Salt behaves as a barrier for rupture propagation to the basement below and occurrence of the aftershock activity downdip from the rupture within the Hormuz Salt. Calculated Coulomb stress variations caused by the coseismic rupture indicates stress coupling between the 2005 Qeshm Island earthquake and both the largest aftershock several hours later and the 2008 Qeshm Island earthquake (MW?=?5.9). The stress calculations further indicated stress load at the depth range (15–20 km) of the well-located aftershocks, corresponding to depths of the Hormuz Salt and top of the basement and providing plausible explanation for occurrence of the aftershocks within those layers.  相似文献   

20.
To understand the generation mechanism of the Bam earthquake (Mw 6.6), we studied three-dimensional VP, VS and Poisson's ratio (σ) structures in the Bam area by using the seismic tomography method. We inverted accurate arrival times of 19490 P waves and 19015 S waves from 2396 aftershocks recorded by a temporal high-sensitivity seismic network. The 3-D velocity structure of the seismogenic region was well resolved to a depth of 14 km with significant velocity variations of up to 5%. The general pattern of aftershock distribution was relocated by using the 3-D structure to delineate a source fault for a length of approximately 20 km along a line 4.5 km west of the known geological Bam fault; this source fault dips steeply westward and strikes a nearly north–south line. The main shallow cluster of aftershocks south of the city of Bam is distributed just under the minor surface ruptures in the desert. The 3-D velocity structure shows a thick layer of high VS and low σ (minimum: 0.20) at a depth range of 2–6 km. The deeper layer, with a thickness of about 2 km, appears to have a low VS and high σ (maximum: 0.28) from 6 km depth beneath Bam to a depth of 9 km south of the city. The inferred increase of Poisson's ratio from 2 to 10 km in depth may be associated with a change from rigid and SiO2-rich rock to more mafic rock, including the probable existence of fluids. The main seismic gap of aftershock distribution at the depth range of 2 to 7 km coincides well with the large slip zone in the shallow thick layer of high VS and low σ. The large slip propagating mainly in the shallow rigid layer may be one of the main reasons why the Bam area suffered heavy damage.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号