首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
We describe the stratigraphy, chronology, and grain size characteristics of the white trachytic tuff (WTT) of Roccamonfina Volcano (Italy). The pyroclastic rock was emplaced between 317 and 230 Ma BP during seven major eruptive events (units A to G) and three minor events (units BC, CD, and DE). These units are separated by paleosol layers and compositionally well-differentiated pyroclastic successions. Stratigraphic control is favored by the occurrence at the base of major units of marker layers. Four WTT units (1 to 4) occur within the central caldera. These are not positively correlated with specific extracaldera units.The source of most of the WTT units was the central caldera. Units B and C were controlled by the western wall of the caldera, whereas units D and E were able to overcome this barrier, spreading symmetrically along the flanks of MC. The maximum pumice size (MP) of units increases with distance from the caldera, whereas the maximum lithic size (ML) decreases. MP and ML of the marker layer of unit D (MKDa–MKDp) do not show any systematic variations with respect to the central caldera. In contrast, the thickness of surge MKDa decreases with distance from the source, and MKDp accumulates to the north of MC probably controlled, respectively, by mobility-transport power and by wind blowing northwards.The grain size characteristics of the WTT deposits are used for classifying the units. There is no systematic variation of the grain size as a function of stratigraphic height either among units or within single units. Large variation of components in subunit E1, with repetitive alternation of pyroclastic flow to surge through fallout vs. surge deposits, suggests that the process of eruption took place in a complex or piecemeal fashion.Pumice concentration zones (PCZ) occur at all WTT levels on the volcano, but they are much thicker and pumice clasts are much larger within the central caldera. These were probably originated by the disruption of lava (flow or dome) to pumice fragments and fine ash due to sudden depressurization and interaction with lake waters of the molten lava. Local basal PCZ are, in some cases, similar to the lapilli-rich “layer 1P” that has been described elsewhere, and may have been deposited from currents transitional between pyroclastic surge and flow. Other basal PCZ formed in response to small undulations in the substrate, or can be originated by fallout. Lenticular PCZ within ignimbrite interiors and tops are interpreted to record marginal pumice levees and pumice rafts, some of which were buried by subsequant pyroclastic flows.Lithic concentration zones (LCZ) also occur at various stratigraphic height within the extracaldera ignimbrites, whereas intracaldera LCZ are absent, probably due to the fact that ignimbrite currents are strongly energetic and erosive near vent. LCZ at the top of basal inversely graded layers are formed by mechanical sieving or dispersive pressure in response to variable velocity gradients and particle concentration gradients (a segregation process). Coarse LCZ and coarse lithic breccias (LB), that reside in the interior or tops of pyroclastic flows and that occur in medial to distal areas, are interpreted to be the result of slugs of lithic-rich debris introduced by vent collapse or rockslides into the moving pyroclastic flows along their flow paths. These LCZ become mixed to varying degrees due to differential densities and velocities relative to the pyroclastic flows (desegregation processes).  相似文献   

2.
The 2.08-Ma Cerro Galán Ignimbrite (CGI) represents a >630-km3 dense rock equivalent (VEI 8) eruption from the long-lived Cerro Galán magma system (∼6 Ma). It is a crystal-rich (35–60%), pumice (<10% generally) and lithic-poor (<5% generally) rhyodacitic ignimbrite, lacking a preceding plinian fallout deposit. The CGI is preserved up to 80 km from the structural margins of the caldera, but almost certainly was deposited up to 100 km from the caldera in some places. Only one emplacement unit is preserved in proximal to medial settings and in most distal settings, suggesting constant flow conditions, but where the pyroclastic flow moved into a palaeotopography of substantial valleys and ridges, it interacted with valley walls, resulting in flow instabilities that generated multiple depositional units, often separated by pyroclastic surge deposits. The CGI preserves a widespread sub-horizontal fabric, defined by aligned elongate pumice and lithic clasts, and minerals (e.g. biotite). A sub-horizontal anisotropy of magnetic susceptibility fabric is defined by minute magnetic minerals in all localities where it has been analysed. The CGI is poor in both vent-derived (‘accessory’) lithics and locally derived lithics from the ground surface (‘accidental’) lithics. Locally derived lithics are small (<20 cm) and were not transported far from source points. All data suggest that the pyroclastic flow system producing the CGI was characterised throughout by high sedimentation rates, resulting from high particle concentration and suppressed turbulence at the depositional boundary layer, despite being a low aspect ratio ignimbrite. Based on these features, we question whether high velocity and momentum are necessary to account for extensive flow mobility. It is proposed that the CGI was deposited by a pyroclastic flow system that developed a substantial, high particle concentration granular under-flow, which flowed with suppressed turbulence. High particle concentration and fine-ash content hindered gas loss and maintained flow mobility. In order to explain the contemporaneous maintenance of high particle concentration, high sedimentation rate at the depositional boundary layer and a high level of mobility, it is also proposed that the flow(s) was continuously supplied at a high mass feeding rate. It is also proposed that internal gas pressure within the flow, directed downwards onto the substrate over which the flow was passing, reduced the friction between the flow and the substrate and also enhanced its mobility. The pervasive sub-horizontal fabric of aligned pumice, lithic and even biotite crystals indicates a consistent horizontal shear force existed during transport and deposition in the basal granular flow, consistent with the existence of a laminar, shearing, granular flow regime during the final stages of transport and deposition.  相似文献   

3.
Palaeomagnetic data from lithic clasts collected at 46 sites within layers 1 and 2 of the 1.8-ka Taupo ignimbrite, New Zealand, have been used to determine the palaeotemperatures and thermal structure of the deposit on its emplacement. Equilibrium temperatures from sites less than 30–40 km from vent are 150–300 °C, whereas at greater distances site equilibrium temperatures increase up to 400–500 °C. This variation is seen in both layer 1 and 2 deposits, with values for layer 1 being somewhat cooler, and with its increase in temperature occurring at a greater distance from vent. A temperature maximum at ~50 km from vent coincides with a zone of pink thermal-oxidation colouration of pumices previously inferred to reflect higher emplacement temperatures. Additional palaeomagnetic data collected by us and others from pumice clasts show comparable temperature variations, but these temperature estimates are shown here to be due to a chemical remanence and unreliable for accurate temperature estimates. Cooler temperatures in proximal parts of the ignimbrite are consistent with admixture of >20% cold lithic clasts at source and interaction with the pre-eruption Lake Taupo. The similar, but offset, increases in equilibrium temperatures for medial and distal layers 1 and 2 are consistent with both layers being deposited from the same flow. However, any proximal deposits left by the later, hotter material must have been subsequently eroded, or be so thin that our collection failed to sample them. Radial asymmetries in equilibrium temperatures as well as other physical parameters suggest that the deposit emplacement temperature is primarily determined at source, rather than by interaction with air during transport. These data support previous interpretations that a concentrated basal flow played a dominant role in emplacement and deposition of the Taupo ignimbrite.Editorial responsibility: T. Druitt  相似文献   

4.
The submarine counterparts of late Quaternary subaerial pyroclastic flow deposits off the western flanks of Dominica, Lesser Antilles, have been investigated by 3.5 kHz seismic profiling and dredging (cruise EN20 of R/V “Endeavor”). Block-and-ash flow deposits formed by dome collapse and a welded ignimbrite from a prominent fan at Grande Savanne, Dominica. This fan can be traced underwater as a major constructional ridge (2–4 km wide and 200–400 m thick) to over 13 km offshore at a water depth of 1800 m. The submarine ridge has a volume of 14 km3 and has the characteristic morphology of a debris flow apron composed of several individual units. The evidence suggests that pyroclastic flows can move underwater without losing their essential character.  相似文献   

5.
The 274 ka “Basalt-Trachytic Tuff of Tuoripunzoli” (TBTT) from Roccamonfina volcano (Roman Region, Italy) consists of a basaltic scoria lapilli fall (Unit A) overlain by a trachytic sequence formed by a surge (Unit B), repetitive pumice lapilli and ash-rich layers both of fallout origin (Unit C) and a pyroclastic flow deposit (Unit D). The TBTT is widespread (40 km2) in the northern sector of the volcano, but limited to a small area on the southern slopes of the main cone. Interpolation between the northern deposits and the latter one yields a minimum depositional area of 123 km2, and an approximate bulk volume of 0.2-0.3 km3. Isopach and isopleth maps are consistent with a source vent within the main caldera of Roccamonfina.Unit A shows a fairly good sorting and a moderate grain size; glass fragments are cuspate and vesicular. Unit B is fine grained and poorly sorted; shards are blocky and nonvesicular. Pumice lapilli of Unit C are moderately sorted and moderately coarse grained. Glass shards are equant and vesicular. Lithic clasts are strongly comminuted to submillimetric sizes. By contrast, the ash-rich internal divisions are very fine grained and poorly sorted. They consist of a mixture of equant shards which are prevailingly blocky and poorly vesicular. Unit D is a massive, poorly sorted, moderately coarse-grained deposit. Glass fragments are nearly equant and slightly or nonvesicular.The TBTT is interpreted as due to eruption of a basaltic magma followed in rapid succession by one trachyte magma. Unit A formed by Subplinian fallout of a moderate, purely magmatic column. Interaction between a trachyte magma and water resulted in eruption of surge Unit B. A high-standing eruption column erupted alternating fallout pumice lapilli and fallout ashes. Pumice lapilli originated prevailingly from the inner part of the eruption column, whereas magma-water interaction on the external parts of the column resulted in ash fallout. The uppermost pyroclastic flow Unit D is interpreted as due to final collapse of the eruption column.  相似文献   

6.
Proximal deposits of the 3.3 Ma Grants Ridge Tuff, part of a 5-km3 topaz rhyolite sequence, are composed of basal pyroclastic flow, surge, and fallout deposits, a thick central ignimbrite, and upper surge and fallout deposits. Large lithic blocks (≤2 m) of underlying sedimentary and granitic bedrock that are present in lower pyroclastic flow and fallout deposits indicate that the eruptive sequence began with explosive, conduit-excavating eruptions. The massive, nonwelded central ignimbrite displays evidence for postemplacement deformation. The upper pyroclastic surge deposits are dominated by fine ash, some beds containing accretionary lapilli, soft-sediment deformation features, and mud-coated lithic lapilli, indicating an explosive, hydromagmatic component to these later eruptions. The upper fall and surge deposits are overlain by fluvially reworked volcaniclastic deposits that truncate the primary section with a relatively planar surface. The proximal, upper pyroclastic surge and Plinian fall deposits are preserved only in small grabens (5–8 m deep and wide), where they subsided into the ignimbrite and were protected from reworking. The pyroclastic surge and fall deposits within the grabens are offset by numerous small normal faults. The offset on some faults decreases upward through the section, indicating that the faulting process may have been syn-eruptive. Several graben-bounding faults extend downward into the ignimbrite, but the uppermost, fluvially reworked tephra layers are not cut by these faults. The faulting mechanism may have been related to settling and compaction of the 60 m thick, valley-filling ignimbrite along the axis of the paleovalley. Draping surge contacts against the graben faults and brittle and soft-style disruption of the upper pyroclastic surge beds indicate that subsidence was ongoing during the emplacement of the upper eruptive sequence. Seismicity accompanying the late-stage hydromagmatic explosions may have contributed to the abrupt settling and compaction of the ignimbrite.  相似文献   

7.
The 0.196 Ma, lithic-rich Abrigo Ignimbrite on Tenerife, Canary Islands contains localised massive, coarse pumice-rich ignimbrite lobes (MPRILs). They typically form low ridges up to 2 m high with axes parallel to the flow direction, and, in cross-section, they range from symmetrical to asymmetrical and highly skewed lobate bedforms generally with flat bases. The major components are rounded pebble- to cobble-sized phonolitic pumice clasts within an ignimbritic matrix of ash, fine lithics and minor crystals, which varies from lithic-rich to lithic-poor. Commonly, there is a vertical increase in pumice concentration from matrix-supported texture at the base to clast-supported at the top, accompanied by an increase in pumice clast size. MPRILs often thin and grade laterally perpendicular to current flow into planar pumice concentration zones. They occur at one or more stratigraphic levels as either solitary lobes associated with flat topography or as multiple onlapping lobes or within a laterally complex stratified pumice-rich ignimbrite facies (LCSPIs) near palaeotopographic highs.MPRILs are original depositional features, not erosional in origin and are derived from a larger pyroclastic flow. It is likely that pumice was segregated to the upper and outer regions of the parent flow causing a significant rheological contrast with the lower lithic-rich zone. The more pumice-rich parts are interpreted to have detached from the parent flow as it decelerated onto gentler slopes or interacted with topographic highs and raced ahead as mobile derivative pyroclastic flows. The flow-parallel ridge shape of MPRILs may be a result of fingering within these flows or concentration of pumice within the intermediary clefts. Deposition occurred “en masse” at the termination of the flow front. The resultant lobate deposits were then overridden and mantled by normal ignimbrite facies from either a later flow pulse or the following main part of the parent flow.  相似文献   

8.
A model is presented for the emplacement of intermediate volume ignimbrites based on a study of two 6 km3 volume ignimbrites on Roccamonfina Volcano, Italy. The model considers that the flows were slow moving, and quickly deflated from turbulent to non-turbulent conditions. Yield strength and density increased whereas fluidisation decreased with time and runout of the pyroclastic flows. In proximal locations, on the caldera rim, heterogeneous exposures including discontinuous lithic breccias, stratified and cross-stratified units interbedded with massive ignimbrite suggest deposition from turbulent flows. In medial locations thick, massive ignimbrite occurs associated with three types of co-ignimbrite lithic breccia which we interpret as being emplaced by non-turbulent flows. Multiple grading of different breccia/lithic concentration types within single flow units indicates that internal shear occurred producing overriding or overlapping of the rear of the flow onto the slower-moving front part. This overriding of different parts of non-turbulent pyroclastic flows could be caused by at least two different mechanisms: (1) changes in flow regime, such as hydraulic jumps that may occur at breaks in slope; and (2) periods of increased discharge rate, possibly associated with caldera collapse, producing fresh pulses of lithic-rich material that sheared onto the slower-moving part of the flow in front.We propose that ground surge deposits enriched in pumice compared with their associated ignimbrite probably formed by a flow separation mechanism from the top and front of the pyroclastic flow. These turbulent clouds moved ahead of the non-turbulent lower part of the flow to form stratified pumice-rich deposits. In distal regions well-developed coarse, often clast-supported, pumice concentrations zones and coarse intra-flow-unit lithic concentrations occur within the massive ignimbrite. We suggest that the flows were non-turbulent, possessed a relatively high yield strength and may have moved by plug flow prior to emplacement.  相似文献   

9.
The Rio Caliente ignimbrite is a multi-flow unit orcompound ignimbrite formed during a major late Quaternary explosive rhyolitic eruption of La Primavera volcano, Mexico. The eruption sequence of the ignimbrite is complex and it occurs between lower and upper plinian air-fall deposits. It is, therefore, anintraplinian ignimbrite. Air-fall layers, pyroclastic surge, mudflow and fluviatile reworked pumice deposits also occur interbedded between ignimbrite flow units. A chaotic near-vent facies of the ignimbrite includes co-ignimbrite lag breccias segregated from proximal pumice flows. The facies locates a central vent but one which could not have been associated with a well defined edifice. Many of the lithics in the exposed lag breccias and near-vent facies of the ignimbrite appear to be fragments of welded Rio Caliente ignimbrite, and indicate considerable vent widening, or migration, during the eruption. Nearer vent the ignimbrite is thickest and composed of the largest number of flow units. Here it is welded and is a simple cooling unit. Evidence suggests that it was only the larger thicker pumice flows that escaped to the outer parts of the sheet. Detailed analysis of four flow units indicates that the pumice flows were generally poorly expanded, less mobile flows which would be produced by collapse of low eruption columns. The analogy of a compound ignimbrite with a compound lava flow is, therefore, good — a compound lava flow forms instead of a simple one when the volumetric discharge rate (or intensity) is low, and in explosive eruptions this predicts lower eruption column heights. A corollary is that the ignimbrite has a high aspect ratio. The complex eruption sequence shows the reinstatement of plinian activity several times during the eruption after column collapse occurred. This, together with erosional breaks and evidence that solidified fragments of already welded ignimbrite were re-ejected, all suggest the eruption lasted a relatively significant time period. Nearly 90 km3 of tephra were erupted. The associated plinian pumice fall is one of the largest known having a volume of 50 km3 and the ignimbrite, plus a co-ignimbrite ash-fall, have a volume of nearly 40 km3. Published welding models applied to the reejected welded blocks indicate an eruption duration of 15-20d, and a maximum average magma-discharge rate of 1.4 × 104 m3/s for the ignimbrite. This is low intensity when compared with available data from other ignimbrite-forming eruptions, and concurs with all the geological evidence presented. The total eruption duration was perhaps 15-31d, which is consistent with other estimates of the duration of large magnitude explosive silicic eruptions.  相似文献   

10.
A distinctive type of fine-grained air-fall ash is found intimately associated with many ignimbrites. They have crystal/glass ratios systematically lower than artificially crushed pumice from the same ignimbrites. The crystal enrichment found in crystal-bearing ignimbrites indicates substantial losses of the vitric component, amounting to an average of at least 35% by weight of the original juvenile material, and this lost material is believed to occur in the ash-fall deposits. These ashes thus complement ignimbrite, and are here called “co-ignimbrite ashes”. The loss is believed to take place during ignimbrite eruptions as a result of: (1) the escape of fine ash and gas above a collapsing eruptive column; (2) the preferential entry of fine vitric ash into an upper turbulent cloud when (immediately following column collapse) the segregation of a dense pyroclastic flow from an initially highly turbulent, low-concentation density flow takes place; (3) the elutriation of fine vitric ash (generated in part within the pyroclastic flow) from the fluidised flow. Ash from all three mechanisms would be expected to rise to a great height in convective plumes and be dispersed by winds to produce extensive, vitric-enriched ash-fall deposits.The data indicate that the co-ignimbrite ashes must have volumes comparable with those of ignimbrites, and examples are given of particularly large ash-fall deposits (including some found in deep-sea cores) associated with large ignimbrites which may be of this type rather than fall-out from a preceding plinian phase as hitherto thought.  相似文献   

11.
The Ottaviano eruption occurred in the late neolithic (8000 y B.P.). 2.40 km3 of phonolitic pyroclastic material (0.61 km3 DRE) were emplaced as pyroclastic flow, surge and fall deposits. The eruption began with a fall phase, with a model column height of 14 km, producing a pumice fall deposit (LA). This phase ended with short-lived weak explosive activity, giving rise to a fine-grained deposit (L1), passing to pumice fall deposits as the result of an increasing column height and mass discharge rate. The subsequent two fall phases (producing LB and LC deposits), had model column heights of 20 and 22 km with eruption rates of 2.5 × 107 and 2.81 × 107 kg/s, respectively. These phases ended with the deposition of ash layers (L2 and L3), related to a decreasing, pulsing explosive activity. The values of dynamic parameters calculated for the eruption classify it as a sub-plinian event. Each fall phase was characterized by variations in the eruptive intensity, and several pyroclastic flows were emplaced (F1 to F3). Alternating pumice and ash fall beds record the waning of the eruption. Finally, owing to the collapse of a eruptive column of low gas content, the last pyroclastic flow (F4) was emplaced.  相似文献   

12.
Nuées ardentes associated with dome collapse on 22 November 1994, at Merapi volcano traveled to the south–southwest as far as 6.5 km, and collectively accumulated roughly 2.5–3 million cubic meters of deposits. The damaged area comprises 9.5 km2 and is covered by two nuée ardente facies, a conventional “Merapi-type”, valley-fill block-and-ash flow facies and a pyroclastic surge facies. The proximal deposits reflect the accumulation of dozens of nuées ardentes, with many subsidiary flow units. The distal deposits are more simply organized, as only a few individual events reached to distances >3.5 km. The stratigraphic relationships north of Turgo hill indicate that the surge deposits are a facies of particularly mobile nuées ardentes that also deposited channeled block-and-ash flow facies. They further suggest that the surge facies beyond the channel margins correlate laterally with a finer-grained sublayer locally developed at the base of the block-and-ash flow facies. Eyewitness reports suggest that the emplacement of the block-and-ash flow facies in the distal part of the Boyong river may have followed, by a short time interval, the destruction and deposition of the surge facies at Turgo village. The stratigraphy is in accord with the eyewitness reports. The surge facies was emplaced by a dilute surge current, detached from the same dome-collapse nuée ardente that, as a separate flow unit, subsequently emplaced the distal block-and-ash deposit in the Boyong valley. The detachment occurred at higher elevations, likely at or above the slope break at about 2000 m elevation. This flow separation enabled the surge current to shortcut over the landscape and to emplace its deposit even as the block-and-ash flow continued its tortuous southward movement in the Boyong channel. Dome-collapse nuée ardente activity formed the bulk of the eruption, which was accompanied by virtually no significant vertical summit explosive activity.  相似文献   

13.
The 4.3-m.y.-old medium-volume low-aspect-ratio Kizilkaya ignimbrite (50–100 km3 DRE) is one of the most widespread in the Cappadocian Volcanic Province covering about 8500–10,600 km2. The ignimbrite rests on a relatively fine-grained fan of Plinian pumice-fall deposit (Md of 1.0–1.80 mm in proximal locations). The eruptive center was located in the Misli plain northeast of Nigde, as deduced from thickness and grain-size variations of the fall deposit, flow direction indicators, welding patterns of the ignimbrite and the distribution of certain types ofxenoliths. The massive ignimbrite, generally about 15 m thick, covers a paleoplain throughout at least two thirds of its areal extent. It comprizes two flow units, identified by local pumice enrichment in the upper part of the lower unit. The ignimbrite is completely welded in many places. In other places, the lower flow unit is non-welded, particularly where the initial pumice-fall deposit was eroded, a fine-grained ground layer was deposited, and undulating or cross-laminations with antidunes were developed. The ground layer was derived from the ignimbrite ground-mass by loss of fines < 250–500 μm.Depositional characteristics indicate that the ignimbrite was emplaced as high-concentration flows with relatively low velocity and low heat loss during runout. Local development of a ground layer and internal bedding structures indicate local increased turbulence only within individual flow portions due to agitated fluidization from engulfed air. The degree of welding of the lower flow unit was controlled by this turbulence and is not related to thickness variations.  相似文献   

14.
A geological, chemical and petrographical study of the Campanian ignimbrite, a pyroclastic flow deposit erupted about 30,000 years ago on the Neapolitan area (Italy), is reported. The ignimbrite covered an area of at least 7,000 km2; it consists of a single flow unit, and the lateral variations in both pumice and lithic fragments indicate that the source was located in the Phlegraean Fields area. Textural features, areal distribution and its morphological constraints suggests that the eruption was of the type of highly expanded low-temperature pyroclastic cloud. The original composition was strongly modified by post-depositional chemical changes involving most of the major and trace elements. No primary differences in the composition of the magma have been recognized. The Campanian ignimbrite is a nearly saturated potassic trachyte, similar to many other trachytes of the Quaternary volcanic province of Campania. Its chemistry indicates an affinity with the so-called «low-K association» of the Roman volcanic province.  相似文献   

15.
The grainsize characteristics of dune-bedded pyroclastic surge bedsets are surveyed. The variance between coarsest and finest beds ranges from 1 to 6 phi in different surge bedsets, and it increases as the grainsize of the coarsest bed increases, reflecting an increasing velocity of emplacement. Deposits of wet surges, identified as those which contain accretionary and ash-coated lapilli, tend to be finer and show less variance, this partly because wet ash is cohesive, but mainly because wet surges tend to be weaker. Dry surge bedsets are strongly fines-depleted, wet ones less so. The lack of erosion of underlying ash layers shows that the environment is a strongly depositional one. Individual bedsets are demarcated by thin intervening fine ash-fall layers, which are the complementary ash-cloud deposits settled or flushed out after the passage and decay of each turbulent surge. Surge deposits are generally less coarse than the coarsest associated airfall deposits, which shows that they are formed by generally weaker events.This study helps interpret the dune-bedded parts of the landscape-mantling May 18th 1980 “blast” deposit of Mount St. Helens. The blast was a very violent event, but the variance and the grainsize of the coarsest bed are those of a relatively weak surge. This suggests that the dune-bedding was produced by a weak effect, such as minor turbulence in a thin pyroclastic flow coming to rest in a mountainous terrain roughened by tree stumps and fallen logs.  相似文献   

16.
 Coarse, co-ignimbrite lithic breccia, Ebx, occurs at the base of ignimbrite E, the most voluminous and widespread unit of the Kos Plateau Tuff (KPT) in Greece. Similar but generally less coarse-grained basal lithic breccias (Dbx) are also associated with the ignimbrites in the underlying D unit. Ebx shows considerable lateral variations in texture, geometry and contact relationships but is generally less than a few metres thick and comprises lithic clasts that are centimetres to a few metres in diameter in a matrix ranging from fines bearing (F2: 10 wt.%) to fines poor (F2: 0.1 wt.%). Lithic clasts are predominantly vent-derived andesite, although clasts derived locally from the underlying sedimentary formations are also present. There are no proximal exposures of KPT. There is a highly irregular lower erosional contact at the base of ignimbrite E at the closest exposures to the inferred vent, 10–14 km from the centre of the inferred source, but no Ebx was deposited. From 14 to <20 km from source, Ebx is present over a planar erosional contact. At 16 km Ebx is a 3-m-thick, coarse, fines-poor lithic breccia separated from the overlying fines-bearing, pumiceous ignimbrite by a sharp contact. This grades downcurrent into a lithic breccia that comprises a mixture of coarse lithic clasts, pumice and ash, or into a thinner one-clast-thick lithic breccia that grades upward into relatively lithic-poor, pumiceous ignimbrite. Distally, 27 to <36 km from source Ebx is a finer one-clast-thick lithic breccia that overlies a non-erosional base. A downcurrent change from strongly erosional to depositional basal contacts of Ebx dominantly reflects a depletive pyroclastic density current. Initially, the front of the flow was highly energetic and scoured tens of metres into the underlying deposits. Once deposition of the lithic clasts began, local topography influenced the geometry and distribution of Ebx, and in some cases Ebx was deposited only on topographic crests and slopes on the lee-side of ridges. The KPT ignimbrites also contain discontinuous lithic-rich layers within texturally uniform pumiceous ignimbrite. These intra-ignimbrite lithic breccias are finer grained and thinner than the basal lithic breccias and overlie non-erosional basal contacts. The proportion of fine ash within the KPT lithic breccias is heterogeneous and is attributed to a combination of fluidisation within the leading part of the flow, turbulence induced locally by interaction with topography, flushing by steam generated by passage of pyroclastic density currents over and deposition onto wet mud, and to self-fluidisation accompanying the settling of coarse, dense lithic clasts. There are problems in interpreting the KPT lithic breccias as conventional co-ignimbrite lithic breccias. These problems arise in part from the inherent assumption in conventional models that pyroclastic flows are highly concentrated, non-turbulent systems that deposit en masse. The KPT coarse basal lithic breccias are more readily interpreted in terms of aggradation from stratified, waning pyroclastic density currents and from variations in lithic clast supply from source. Received: 21 April 1997 / Accepted: 4 October 1997  相似文献   

17.
Two major pyroclastic surges generated during the 4 April 1982 eruption of El Chichon devastated an area of 153 km2 with a quasi-radial distribution around the volcano. The hot surge clouds carbonized wood throughout their extent and were too hot to allow accretionary lapilli formation by vapor condensation. Field evidence indicates voidage fraction of 0.99 in the surge cloud with extensive entrainment of air. Thermal calculations indicate that heat content of pyroclasts can heat entrained air and maintain high temperatures in the surge cloud. The dominant bed form of the surge deposits are sand waves shaped in dune forms with vertical form index of 10–20, characterized by stoss-side erosion and lee-side deposition of 1–10 cm reversely graded laminae. A systematic decrease in maximum lithic diameter with distance from source is accompanied by decrease in wavelength and amplitude. Modal analysis indicates fractionation of glass and pumice from the surge cloud relative to crystals, resulting in loss of at least 10%–25% of the cloud mass due to winnowing out of fines during surge emplacement. Greatest fractionation from the –1.0–0.0– grain sizes reflects relatively lower pumice particle density in this range and segregation in the formative stages of the surge cloud. Extensive pumice rounding indicates abrasion during bed-load transport. Flow of pyroclastic debris in the turbulent surge cloud was by combination of bed-load and suspended-load transport. The surges are viewed as expanding pyroclastic gravity flows, which entrain and mix with air during transport. The balance between sedimentation at the base of the surge cloud and expansion due to entrainment of air contributed to low cloud density and internal turbulence, which persisted to the distal edge of the surge zone.  相似文献   

18.
Volcanic clasts in many pyroclastic density current deposits are notably more round than their counterparts in corresponding fall deposits. This increase in roundness and sphericity reflects different degrees of comminution, abrasion and breakup during transport. We performed experimental measurements to determine an empirical relationship between particle shape and mass loss caused by particle–particle interactions. We consider, as examples, pumice from four volcanoes: Medicine Lake, California; Lassen, California; Taupo, New Zealand; Mount St Helens, Washington. We find that average sample roundness reaches a maximum value once particles lose between 15% and 60% of their mass. The most texturally homogeneous clasts (Taupo) become the most round. Crystal-rich pumice abrades more slowly than crystal-free pumice of similar density. Abrasion rates also decrease with time as particles become less angular. We compare our experimental measurements with the shapes of clasts in one of the May 18, 1980 pyroclastic density current units at Mount St Helens, deposited 4–8 km from the vent. The measured roundness of these clasts is close to the experimentally determined maximum value. For a much smaller deposit from the 1915 Lassen eruption, clast roundness is closer to the value for pumice in fall deposits and suggests that only a few volume percent of material was removed from large clasts. In neither field deposit do we see a significant change in roundness with increasing distance from the vent. We suggest that this trend is recorded because much of the rounding and ash production occur in proximal regions where the density currents are the most energetic. As a result, all clasts that are deposited have experienced similar amounts of comminution in the proximal region, and similar amounts of abrasion as they settle through the dense, near-bed region prior to final deposition.  相似文献   

19.
The young non-welded Taupo ignimbrite shows remarkable lateral variations which are documented by granulometric and component analyses, and studies of maximum clast size and density. The grain size spans practically the entire known ignimbrite field, the coarser proximal ignimbrite having a median diameter 100 times greater than the finest distal ignimbrite. The content and maximum size of lithic fragments decrease also by a factor of 100 between proximal and distal parts. The content of free crystals first rises to reach a peak, but thereafter decreases to attain a very low value in far-distal exposures. The pumice maximum size decreases by a factor of about 10, and the most conspicuously coarse pumice rocks occur in a girdle nearly halfway out from vent to distal limit. The pumice in each grain size class decreases in density to half of its near-source value in distal ignimbrite. The overall outward trend is towards an ignimbrite which consists wholly of fine vitric ash; some distal exposures closely approach this condition.These variations are accounted for by a combination of processes operating in the moving ash flow. One is a continuous fragmentation of pumice leading to a rounding of the clasts, a progressive decrease in maximum size, the generation of much vitric dust, and the liberation of crystals. Another is a continuous sedimentation of heavy constituents (lithics and crystals), and an antipathetic rise of lighter coarse pumice towards the top of the flow. These processes operated in a moving flow whose upper layers travelled progressively farther from source; it is the topmost layers, strongly depleted in heavy constituents and enriched in light pumice, which have travelled the farthest and constitute the far-distal parts of the ignimbrite.A number of ignimbrite facies are characterized: the ignimbrite proper, with its proximal, distal, and pumice concentration zone facies; the deposits which form in the head and are then over-ridden by the body of the flow, including the fines-depleted ignimbrite variant and the heavies-enriched ground layer; and the ignimbrite veneer deposits which are left behind by the flow, which differ little from the ignimbrite except in their landscape-mantling form and the occurrence in them of lee-side coarse pumice lenses.  相似文献   

20.
The Sarikavak Tephra from the central Galatean Volcanic Province (Turkey) represents the deposit of a complex multiple phase plinian eruption of Miocene age. The eruptive sequence is subdivided into the Lower-, Middle-, and Upper Sarikavak Tephra (LSKT, MSKT, USKT) which differ in type of deposits, lithology and eruptive mechanisms.The Lower Sarikavak Tephra is characterised by pumice fall deposits with minor interbedded fine-grained ash beds in the lower LSKT-A. Deposits are well stratified and enriched in lithic fragments up to >50 wt% in some layers. The upper LSKT-B is mainly reversely graded pumice fall with minor amounts of lithics. It represents the main plinian phase of the eruption. The LSKT-A and B units are separated from each other by a fine-grained ash fall deposit. The Middle Sarikavak Tephra is predominantly composed of cross-bedded ash-and-pumice surge deposits with minor pumice fall deposits in the lower MSKT-A and major pyroclastic flow deposits in the upper MSKT-B unit. The Upper Sarikavak Tephra shows subaerial laminated surge deposits in USKT-A and subaqueous tephra beds in USKT-B.Isopach maps of the LSKT pumice fall deposits as well as the fine ash at the LSKT-A/B boundary indicate NNE–SSW extending depositional fans with the source area in the western part of the Ovaçik caldera. The MSKT pyroclastic flow and surge deposits form a SW-extending main lobe related to paleotopography where the deposits are thickest.Internal bedding and lithic distribution of the LSKT-A result from intermittent activity due to significant vent wall instabilities. Reductions in eruption power from (partial) plugging of the vent produced fine ash deposits in near-vent locations and subsequent explosive expulsion of wall rock debris was responsible for the high lithic contents of the lapilli fall deposits. A period of vent closure promoted fine ash fall deposition at the end of LSKT-A. The subsequent main plinian phase of the LSKT-B evolved from stable vent conditions after some initial gravitational column collapses during the early ascent of the re-established eruption plume. The ash-and-pumice surges of the MSKT-A are interpreted as deposits from phreatomagmatic activity prior to the main pyroclastic flow formation of the MSKT-B.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号