共查询到20条相似文献，搜索用时 687 毫秒
1.
在外荷载等因素作用下,粗粒土易发生颗粒破碎。对泥岩和砂岩颗粒进行了一系列的单颗粒破碎试验,基于尺寸效应和颗粒破碎分形模型,研究了单颗粒破碎强度、破碎能量及Weibull模量等与分形维数间的关系。利用PFC3D对单颗粒破碎过程进行分析,并与试验数据对比,验证了数值程序的可靠性;随后扩展到大颗粒粒径,分析了其单破碎强度及破碎能量。结果表明：在同类试验条件下,不同材料所得的分形维数是不同的;不同粒径砂岩的破碎程度均大于泥岩;单颗粒破碎强度具有明显的尺寸效应;单颗粒破碎强度与破碎能量均可通过分形维数与颗粒粒径预测得出;修正后的Weibull模量也可通过分形维数得出;数值模拟结果与试验结果及预测结果基本一致;大颗粒粒径单颗粒破碎强度模拟结果与预测结果基本一致,破碎能量稍有差异,需进一步试验验证。研究成果可为获取大粒径粗粒土的单颗粒强度与变形特性提供参考。 相似文献
2.
Undrained monotonic torque-controlled tests were conducted on fine-grained silica sand to study the shear-deformation process in granular materials by using a ring-shear apparatus. Shear-zone structures at various stages in the undrained shear tests were observed during a series of tests in which the experiments were terminated at different shear displacement. For undisturbed samples, the shear zone was only developed during the post-failure stage and its thickness increased with progressed shearing. First the shear surfaces had undulating and asymmetric structures; later they gradually became smooth and parallel to the shearing direction. During this process, pore water pressure was generated, and the effective friction angle decreased correspondingly. Generally, the shear zone could be divided into three parts: the compacted core, the adjacent zone above the core, and the adjacent zone below the core. Grain-size analysis on the sample from the shear zone revealed that grain crushing occurred during each stage and the extent of grain crushing differed for different shear stages. An interesting phenomenon occurred during the steady-state deformation where the coarse and fine particles within the shear zone segregated during motions and a parallel orientation structure developed. These results are helpful for understanding the mechanism of progressive failure in granular material as well as the rapid landslide with long runout study. 相似文献
3.
This paper presents a fundamental study on the effect of the relative humidity on the rockfill crushing strength. This aspect plays an important role in the mechanical behaviour of rockfill, and it is known that certain characteristics of the granular materials, such as compressibility and shear strength, depend on the confining stress, which is a function of the particles crushing. An increased interest has been observed regarding the effect of the relative humidity in the mechanical behaviour of rockfill. Unfortunately, limited research has been conducted until now regarding the study of individual particle crushing. Therefore, this paper thoroughly investigated particle crushing, by performing single-particle crushing tests on rockfill particles divided into four size ranges, under different relative humidity conditions. The experimental results reveal a considerable influence of the relative humidity in the studied rockfill particles, whose strength of the particles with the greatest dimensions in saturated conditions was reduced by half. Consistent macro-mechanical evidence demonstrates that particle’s size and relative humidity conditions depict the most important factors that influence particle crushing strength.
相似文献
4.
颗粒破碎对颗粒材料宏观力学行为有重要影响。 结合Hardin的破碎经验公式,将表征破碎程度的破碎参量与Cosserat连续体的内部长度参数相关联,形成一个基于Cosserat连续体且能考虑颗粒破碎的弹塑性模型。数值算例主要考察了颗粒破碎对颗粒材料承载能力、塑性应变及局部化行为的影响,数值结果表明,颗粒破碎主要发生在剪切带内,颗粒破碎使得剪切带明显变窄且剪切带内外等效塑性应变梯度明显增大。 相似文献
5.
Two granular materials — alluvial quartzy Zbraslav sand and granular silica gel — were tested with the intention to demonstrate the effect of grain crushing. Stepwise transformation of the compression curve produced by progressive grain crushing was observed. Due to grain crushing, shear strength envelope became nonlinear, and the behaviour was no more physically isomorphous. The shear stress–strain diagrams acquire a typical wavy (garland-like) form, induced by periodic softening and hardening of the soil response. The intensity of grain crushing depends (in addition to stress level, grain resistance and time) on the shear path. In the crushing phase, initial porosity and angularity play a secondary role. Many other behavioural features common with granular soils (like increase in dilatancy with density and grain size) are suppressed. Grain crushing thus produces a qualitatively different feature of geomaterial behaviour with grave practical consequences (dense sand, e.g. starts to behave like loose). 相似文献
6.
岩石颗粒破碎是影响粒状材料剪切强度和变形的最主要因素, 岩石颗粒破碎并不是想象的那么难, 像花岗岩颗粒有时在很小的压应力作用下就可以破碎。岩石单颗粒破碎的物理试验结果常常很离散, 完成大量单颗粒破碎的物理试验费时费力不现实, 采用离散单元法(Discrete element method, DEM)PFC软件模拟单颗粒压缩破碎试验, 既能克服单颗粒破碎物理试验的缺陷, 又能解决单颗粒破碎物理试验工作量大的难题, 是研究单颗粒破碎的理想选择。基于DEM的软件PFC2D, 将粒径为0.075～0.1245mm的基本粒子捆绑成不同粒径的单颗粒, 模拟岩石单颗粒压缩破碎试验, 观察颗粒破碎演化过程, 统计单颗粒破碎强度。计算单颗粒压缩破碎后颗粒分布的分维, 验证单颗粒破碎强度的分形模型和单颗粒破碎强度的尺寸效应。文中引用玄武岩单颗粒破碎试验结果, 与单颗粒破碎的离散单元模拟结果进行比较, 验证单颗粒破碎强度的尺寸效应和修正的Weibull理论的离散单元模拟结果。 相似文献
7.
An investigation of excess pore-pressure generation of a weathered granitic sand, taken from the source area of a typical landslide caused as a result of liquefaction, and a fine silica sand was conducted, in which grain crushing within the shear zone of ring-shear test specimens was examined as the key phenomenon of rapid long-runout motion of landslides. In order to investigate and explain the low average apparent-friction angle, mobilized in a liquidized landslide, speed-controlled ring-shear tests were conducted under undrained conditions on weathered granitic-sand specimens, formed under a wide range of initial void ratios. It was revealed that very small steady-state shear resistances were obtained irrespective of the initial void ratios, which can explain the low average apparent-friction angle. In addition, two series of ring-shear tests on weathered-granitic and fine-silica sands were conducted under naturally drained conditions by keeping the upper drain valve of the shear box open during the tests. The first series of tests was performed under differing total normal stresses, but at the same shear speed, and the second series was conducted at differing shear speeds, but under the same total normal stress. In order to investigate and analyze excess pore-pressure generation and dissipation within the shear zone that is associated with grain crushing, permeability analyses were conducted by passing water through the sample box of the ring-shear test apparatus before and after shearing. In addition, grain-size distribution analyses of samples taken from the shear zone after shearing were carried out. For the weathered granitic-sand samples, a significant change in bulk permeability and large amount of grain crushing were observed. In these tests on the above soil, a considerable reduction of shear resistance, which increased proportionally to the total normal stress and shear speed, were obtained. It was observed that due to grain crushing, finer grains that lowered the permeability of the soil in the shear zone, were formed. It is likely that the decrease in permeability facilitated the generation of high excess pore pressures by reducing the pore-pressure dissipation rate from the shear zone; thus, flow behaviour was exhibited even under naturally drained conditions. 相似文献
8.
珊瑚单颗粒破碎特性与珊瑚砂高压缩性、剪缩性及良好蠕变性等宏观力学行为密切相关。珊瑚颗粒的应变率效应对于不同形式荷载作用下珊瑚砂强度与变形特性研究具有重要意义。对约300颗珊瑚颗粒进行0.1～50 mm/min位移速率下的单颗粒破碎试验,探讨加载应变速率对颗粒破碎强度、破碎模式、破碎能量及破碎分形的影响。结果表明,珊瑚颗粒破碎强度服从Weibull分布规律,且特征破碎强度随应变率的提高非线性增大;随着加载速率的增大,颗粒主劈裂破坏往往先于棱角的局部碎裂和表面研磨,相应的荷载?位移曲线呈现出由峰前“多峰”向峰后“多峰”现象转变;珊瑚颗粒破碎能量密度和破碎分形维数同样具有明显的应变率效应,且均与对数应变率呈线性正相关关系,表征能量耗散和破碎程度均随加载应变率的增大而增大。 相似文献
9.
Particle size strongly influences the shear strength of granular materials. However, previous studies of the particle size effect have focused mainly on the macroscopic behavior of granular materials, neglecting the associated micro-mechanism. In this study, the effect of particle size on the shear strength of uncrushable granular materials in biaxial testing is investigated using the discrete element method (DEM). First, a comprehensive calibration against experimental results is conducted to obtain the DEM parameters for two types of quartz sand. Then, a series of biaxial tests are simulated on sands with parallel particle size distributions to investigate the effect of particle size on macro- and microscopic behaviors. Finally, by adopting the rolling resistance method and the clump method, irregular-shaped particles are simulated to investigate how the particle size effect will be influenced by the particle shape. Simulation results demonstrate that (1) the peak shear strength increases with particle size, whereas the residual shear strength is independent of particle size; (2) the thickness of the shear band increases with the particle size, but its ratio decreases with particle size; (3) the particle size effect can be explained by the increase of friction utilization ratio with particle size; and (4) the particle size effect is more significant in granular materials that consist of particles with higher angularity. 相似文献
10.
压力作用下颗粒发生破碎是引起砂土力学特性变化的重要因素之一, 对于钙质砂这种易破碎的材料更是如此。为进一步弄清颗粒破碎对钙质砂的应力-应变强度影响, 本文对钙质砂进行三轴固结排水剪切试验得到应力-应变曲线, 并筛分得到三轴试验前后钙质砂颗分曲线。通过引入Hardin定义的颗粒相对破碎率Br, 分析了相对密度、围压与颗粒破碎的关系及颗粒破碎对钙质砂应力-应变和抗剪强度的影响。结果表明:随围压的增大颗粒破碎增量逐渐减小, 直到破碎达到一个上限值, 此时围压和相对密度对颗粒破碎影响很小; 颗粒间的滑动标志着应力达到极限状态, 而颗粒破碎会阻碍应力达到极限状态, 在本实验中, 低围压时颗粒破碎少, 颗粒相对运动形式为滑移, 使应力-应变曲线为软化型, 高围压下颗粒破碎严重, 颗粒破碎在剪切过程中始终发生, 使应力-应变曲线呈应变硬化型; 颗粒破碎使体变从剪胀逐渐发展到剪缩, 且破碎越严重剪缩越严重; 在低围压下钙质砂强度主要由剪胀和咬合提供, 高围压下颗粒破碎严重, 剪胀消失, 咬合减小, 使峰值摩擦角减小, 抗剪强度降低。 相似文献
11.
The paper provides an in-depth exploration of the role of particle crushing on particle kinematics and shear banding in sheared granular materials. As a two-dimensional approximation, a crushable granular material may be represented by an assembly of irregularly shaped polygons to include shape diversity of realistic granular materials. Particle assemblies are subjected to biaxial shearing under flexible boundary conditions. With increasing percentage of crushed particles, mesoscale deformation becomes increasingly unstable. Fragmented deformation patterns within the granular assemblies are unable to form stable and distinct shear bands. This is confirmed by the sparsity of large fluctuating velocities in highly crushable assemblies. Without generating distinct shear bands, deformation patterns and failure modes of a highly crushable assembly are similar to those of loose particle assemblies, which are regarded as diffuse deformation. High degrees of spatial association amongst the kinematical quantities confirm the key role that non-affine deformation and particle rotation play in the generation of shear bands. Therefore, particle kinematical quantities can be used to predict the onset and subsequent development of shear zones, which are generally marked by increased particle kinematic activity, such as intense particle rotation and high granular temperature. Our results indicate that shear band thickness increases, and its speed of development slows down, with increasing percentage of crushed particles. As particles crush, spatial force correlation becomes weaker, indicating a more diffuse nature of force transmission across particle contacts. 相似文献
12.
脆性颗粒材料的多尺度模型一般包含微观尺度的基本粒子、细观尺度的颗粒和宏观尺度的颗粒堆积体3个尺度。基于离散元方法（DEM）构建多尺度模型,并将该模型应用于动态加载。首先,对多尺度模型所涉及的两种接触模型和两种黏结模型的参数进行分析,详细讨论微细观模型参数与宏观材料常数之间的联系。然后,选用Hertz-Mindlin接触模型[1]和平行键黏结模型,建造石英砂的动态多尺度模型。通过选择合适的强度和局部阻尼参数发现,模型宏细观尺度上的动态压缩响应与对石英砂的相关试验结果吻合很好。利用多尺度模型和选定的参数,探讨与动态加载密切相关的局部阻尼机制对多尺度模型各个尺度上力学响应的影响。结果表明,阻尼越大则颗粒材料对波的衰减能力越强,但过高的阻尼会使团簇强度和模型的宏观压缩曲线都表现出异常的加载速度效应（后者实际是阻尼引起的微惯性效应）。另外,高阻尼会过度衰减颗粒破碎过程产生的应力波,从而阻碍颗粒破碎。最后,应用改进的动态多尺度模型,对脆性颗粒材料的动态破碎特性进行研究,发现该模型不但能给出与试验相吻合的颗粒级配曲线,还能揭示出颗粒破碎过程中微裂纹分布的空间不均匀性,即颗粒破碎过程中波的产生机制和衰减机制相互作用导致的微裂纹聚团分布的现象。 相似文献
13.
流态化运动是高速远程滑坡的主要运动形式,是揭示高速远程滑坡运动机理的重要基础。基于粒子图像测速（PIV）分析方法,采用物理模型试验对不同粒径组成条件下的颗粒流内部的速度分布、剪切变形及流态特征进行了研究,并对高速远程滑坡流态化运动特征进行了讨论分析。结果表明:碎屑流流态化运动特征与颗粒粒径呈显著的相关性,随着粒径的减小或细颗粒含量的增加,颗粒流底部相对于边界的滑动速度以及整体的运动速度均呈逐渐减小的趋势,颗粒流内部剪切变形程度增加,颗粒的运动形式由“滑动”向“流动”转变;当颗粒粒径较小或细颗粒含量较高时,颗粒流内部剪切速率增大的趋势在颗粒流底部更加显著,反映了粒径减小有助于促进颗粒流内部剪切向底部的集中;在同一颗粒流的不同运动阶段及不同纵向深度,其流态特征具有显著差别,颗粒流前缘及尾部主要呈惯性态,颗粒间以碰撞作用为主,而主体部分则主要呈密集态,颗粒间以摩擦接触作用为主;在颗粒流表面及底部,颗粒间相互作用方式主要是碰撞作用,中间部分则以摩擦作用为主;对于不同粒径的颗粒流,随着粒径的增大或粗颗粒含量的增加,颗粒流内部颗粒的碰撞作用加强,颗粒流整体趋于向惯性态转变。 相似文献
14.
Empirical evidence has shown that particle breakage affects the mechanical behaviour of granular materials. The source of this mechanism takes place at the particle scale, and the main consequence on the macromechanical behaviour is increasing compressibility. Due to the inverse correlation between particle size and particle crushing strength, coarse rockfill materials are particularly vulnerable to mechanical degradation due to particle breakage. However, such coarse materials do not fit in standard laboratory devices, and the alternative of large sample testing is usually unavailable or too expensive. Alternatively, recent works have proposed multi-scale approaches using the discrete element method (DEM) to carry out numerical testing of coarse crushable materials, although few studies have focused on size effects. This article presents the application of a DEM bonded-cell model to study particle size-strength correlation on angular rock aggregates. Each particle is modelled by a cluster of perfectly rigid polyhedral cells with Mohr–Coulomb contact law. Constant cell density within particles implies that the presence of potential fragmentation planes increases with size. Therefore, particle strength decreases with size. A comprehensive sensitivity analysis was carried out through 1477 particle crushing simulations in a given particle size. Based on published experimental data on calcareous rock aggregates, part of the simulations were used for calibration, and 97 additional simulations of a coarser size fraction were performed for validation. The results show a good agreement with the empirical data in terms of size effect and data scatter through Weibull statistics. 相似文献
15.
To broaden the availability of granular materials that are suitable for the analog modeling of upper crustal deformation, we investigated the mechanical behaviors of pure quartz sand and two sand mixtures (quartz sand–powdered barite and quartz sand mica crystals) using ring-shear tests and simple convergent sandbox experiments. The ring-shear test results indicate that the three materials have similar peak friction angles (between 39.25° and 36.02°), but the magnitude of the shear strain and the shear strength required to cause their failure are different. The differences between the analog models are identified by distinct fault kinematics and different grain flows, which are primarily related to differences in the plastic elasto-frictional rheology. We conclude that the use of the quartz–mica mixture, which showed the strongest distributed (plastic) deformation, can improve analog models where different materials are required to simulate crystalline basement (sand) and supracrustal rocks (sand mica mixture). This is a common situation in extension and inversion tectonics, such as, for example, in inversion tectonics, when a granitic basement block acts as a buttress. 相似文献
16.
通过排水剪切试验，揭示出易于产生粒子破碎的土体易于产生体积变化，土体初始结构和粒子破碎难易度对体积变化各阶段的影响。在与之相对应的不排水试验中，产生粒子破碎的土体最终产生了较高的超孔隙水压力，而且孔隙水压力产生的各阶段与排水试验中的体积变化阶段具有良好的对应关系。揭示了不同诱因产生的高速滑坡的共同特征，即在长距离运动中，由于粒子破碎的影响，滑动面土体在不排水条件下，抗剪强度因超孔隙水压力上升而下降，最终导致高速滑坡。同时，由于粒子破碎将导致土体自身渗透系数降低，土粒子破碎因而具有促进超孔隙水压力产生和减缓超孔隙水压力消散的双重效果。 相似文献
17.
离散态颗粒物质具有明显不同于普通固体的界面摩擦特性,而摩擦系数是界面摩擦特性的主要表征参数之一。通过倾斜仪开展不同级配条件下颗粒材料的滑动摩擦试验,基于视频图像解析以及函数拟合方法,建立滑动位移与滑动时间的最佳函数拟合关系,分析滑动过程的加速度并推算底面动摩擦系数,研究颗粒粒径、质量配比等级配因素对颗粒材料底面动摩擦系数的影响。研究结果表明:(1)各级配颗粒材料的平均底面动摩擦系数随着运动时间的增加均呈线性减小趋势;(2)对于单粒径材料,与粗颗粒相比,细颗粒具有较大的底面动摩擦系数;(3)对于双粒径材料,随着细颗粒含量的增加,颗粒材料的平均底面动摩擦系数先急剧降低至最小值(细颗粒含量≤40%),后急剧增加(细颗粒含量40% ~60%),最终增加趋势明显变缓(细颗粒含量≥60%)。 相似文献
18.
From the understanding of dynamics and processes of rapid granular flows and the granular-segregation mechanism in gravity-driven flow, we can clarify the particle-composition structure in the downstream areas of avalanches in geophysical contexts, such as landslides, rock falls, and snow-slab avalanches. Such dynamics also provide a basis for geophysical studies. This study experimentally investigates the dynamic behavior and segregation phenomena of a density-bidisperse, rapid, granular flow down a quasi-2D, rough, inclined rectangular chute. Particles with two density ratios are used to investigate the mechanism of density-induced segregation, and four chute-inclination angles are tested to examine the influence of driving forces. The dynamics of the mixture flow—which includes the flow-depth evolution, stream-wise and depth-wise velocity profiles, shear rate, and granular temperature in the upper high-shear band of the flow—are obtained from particle image velocimetry (PIV) measurements. The two-dimensional concentration distributions of the particles in the stream-wise direction are also obtained using 2D image processing to determine the segregation state. In the upstream region, the variation in the concentration of heavier particles is defined as the strength of the density-induced segregation state, Sd. Our results indicate that the mixture-flow parameter—particularly the shear rate and the granular temperature in the upper high-shear band—crucially influence the strength of particle segregation in granular avalanches. In the upstream region, a higher shear rate and a higher granular temperature in the upper high-velocity band result in a smaller drag force in the mixture flow, causing stronger density-induced particle segregation. These results well describe the entire processes of dense granular flows, from upstream initiation to the downstream steady state. Therefore, they reveal the structure of the mixed flow in the depth direction and are expected to explain various gravity-driven mixture granular flows. 相似文献
19.
Heavy rainfall from 26 to 31 August 1998 triggered many landslides in Nishigo Village of southern Fukushima Prefecture, Japan. The Hiegaesi landslide, a long-runout landslide with travel angle of 11°, which occurred in loamy volcanic-ash/pumice layer and was deposited in a nearby rice paddy, was investigated. In an observation pit dug in the middle part of the landslide deposit, the sliding zone just above the deflected rice plants was observed, and it was confirmed that grain crushing occurred in the sliding zone. The triggering and sliding mechanisms of this landslide then were investigated by ring-shear tests in laboratory. For the triggering mechanism, one saturated naturally drained test (test A: torque-controlled test) and one saturated undrained test (test B: speed-controlled test) were conducted on the samples taken from the source area of the landslide. Even in the naturally drained test opening the upper drain valve of the shear box, a temporary liquefaction occurred. In the undrained test, excess pore-pressure was generated along with shearing, and “sliding-surface liquefaction” phenomenon was observed. The effective stress and shear resistance finally decreased to near zero. These results can explain the observed phenomenon of small friction resistance like a flow of liquid when the sliding mass slid out of the source area. For the sliding mechanism of the landslide in the rice paddy, saturated undrained test (test C: speed-controlled test) was performed on soil sample above the deflected rice plants. The apparent friction angle obtained in this test was 8°. In addition, the residual friction angle measured after test B and test C was the same value of 41°. Combining with the observation on the shear zone in the ring-shear box after test C, it is concluded that, during the sliding in rice paddy, the undrained shear strength of the soil layer itself mainly influenced the high mobility of the landslide, probably because the friction between rice plants and soils is greater than the undrained shear strength inside the soil mass. 相似文献
20.
Using a new ring-shear apparatus with a transparent shear box and video image analysis system, drained and undrained speed-controlled tests were conducted on coarse-grained silica sands to study the shear-zone formation process in granular materials. Velocity distribution profiles of grains under shear at various stages in the ring shear tests were observed through processing the video image by the Particle Image Velocimetry (PIV) program. Shear-zone thickness and type of shear mode (slide-like or flow-like) during shear were observed. Before reaching peak strength in low-speed and drained condition test, a comparatively major part of the sample in the upper shear box showed a velocity distribution profile of structural deformation and dilatancy behavior. After peak strength, the velocity profile changed into a slide-like mode and thereafter showed almost no change. In higher speed tests with drained and undrained conditions, an almost slide-like mode was observed, compared to low-speed test. Apparent shear-zone thicknesses of high-speed tests are thinner than low-speed tests. Unexpectedly, almost no difference was observed in the shear-zone thickness and mode of shear (slide or flow-like) between drained and undrained tests. This study was conducted as part of the International Programme on Landslides (IPL) M101 “Areal prediction of earthquake and rain induced rapid and long-traveling flow phenomena (APERITIF)” of the International Consortium on Landslides (ICL). These results will contribute to understanding the mechanism of shear-zone development in granular materials as a basic knowledge for disaster risk mitigation of rapid long run-out landslides. 相似文献
|
