共查询到20条相似文献，搜索用时 31 毫秒
1.
Fabrizio Felletti 《Sedimentology》2002,49(4):645-667
ABSTRACT This paper details the influence of syndepositional tectonics in controlling the architecture of a well‐exposed confined turbiditic sandbody, which crops out in the eastern part of the Tertiary Piedmont Basin (Castagnola Basin, northern Italy). The Castagnola Basin was tectonically active during sedimentation of the sandbody, and the lateral distribution of turbidity‐current deposits has been used to constrain both how the basin subsided and the impact of basin topography on flow behaviour and deposition. The sandbody occurs in the lower member of an Upper Oligocene–Lower Miocene turbidite system (the Castagnola Formation). The sandbody is ≈30 m thick and can be followed laterally for ≈1·8 km; it shows onlap terminations onto both northern and southern basin margins. The outcrop is sufficiently large to allow a detailed analysis of the facies and geometrical heterogeneity, as viewed approximately parallel to the average palaeocurrent trend (SW–NE). Correlation between 41 sedimentological logs reveals the diachronous development of a succession of sandstone packages (subunits). Nine vertically stacked and laterally juxtaposed packages have been recognized (subunits B to I from oldest to youngest), which reflect changes in basin floor accommodation as a result of synsedimentary tectonism. Each package shows the development of different vertical stacking patterns with thinning‐ and ‐fining‐upward small‐scale sequences and variable lateral facies arrangements, as a consequence of the position relative to the basin margins. The geometry, stratigraphic relationships, facies distribution and palaeocurrent directions indicate that turbidite deposition during accumulation of most of the sandbody was controlled by (1) synsedimentary tilting of the basin slopes; (2) the distribution of structural and depositional relief within the basin; (3) the thickness and volume of the turbidite flows; and (4) the angle of impingement of turbidity currents against the basin slopes. 相似文献
2.
Glacial influence on Neoproterozoic sedimentation: the Smalfjord Formation, northern Norway 总被引：1，自引：0，他引：1
ABSTRACT There is much debate regarding the intensity and geographic extent of glaciation during the Neoproterozoic, particularly in response to recent geochemical work suggesting that the Neoproterozoic earth was at times ice covered from equator to poles (the ‘Snowball Earth’ hypothesis). A detailed sedimentological analysis of the Neoproterozoic Smalfjord Formation of northern Norway was conducted in order to determine the extent and intensity of glacial influence on sedimentation. In the Tarmfjorden area, the Smalfjord Formation consists of a stacked succession of diamictites interbedded with fine‐grained laminated mudstones containing rare outsized clasts. Diamictites and interbedded mudstones are interpreted as the product of subaqueous mass flows generated along the basin margin. In the Varangerfjorden area, chaotically interbedded diamictites, conglomerates and sandstones are overlain by a thick succession of stacked sandstone beds; onediamictite unit at Bigganjargga overlies a striated pavement. The Varangerfjorden outcrops appear to record deposition on a subaqueous debris apron. Although diamictites contain rare striated and faceted clasts, suggesting a glacial sediment source, their origin as subaqueous mass flows prevents the interpretation of ice mass form or distribution. Rare lonestones may be associated with floating ice in the basin, which may be of glacial or seasonal origin. Glacial ice may have contributed poorly sorted glacial debris to the basin margin, either directly or through fluvioglacial systems, but there is no evidence of direct deposition by ice at Varangerfjorden or Tarmfjorden. The overall fining‐upward trend identified in the Smalfjord Formation and overlying Nyborg Formation is consistent with depositional models of rift basin settings. This fining‐upward trend, the predominance of mass flow facies including breccias associated with scarps and the evidence for extensional tectonic activity in the region suggest that tectonic activity may have played an important role in the development of this Neoproterozoic succession. The Smalfjord Formation at Tarmfjorden and Varangerfjorden does not exhibit sedimentological characteristics consistent with severe glacial conditions suggested by the snowball Earth hypothesis. 相似文献
3.
The Kamoa sub‐basin, in the south‐eastern part of the Democratic Republic of Congo, is a rift basin that hosts a world‐class stratiform copper deposit at the base of a very thick (1·8 km) succession of matrix‐supported conglomerates (diamictite) (Grand Conglomérat Formation) that has been interpreted by some as the product of deposition in the aftermath of a planet‐wide glaciation. Newly available subsurface data consisting of more than 300 km of drill core throws new light on the origin of diamictite and associated facies types, and their tectonic, basinal and palaeoclimatic setting. Initiation of rifting is recorded by a lowermost subaqueous succession of fault‐related mass flow conglomerates and breccias (the ‘Poudingue’) with interdigitating coeval and succeeding sandstone turbidites (Mwashya Subgroup). Overlying diamictites of the Grand Conglomérat were deposited as subaqueous debrites produced by mixing and homogenization of antecedent breccias and gravel from the Poudingue and Mwashya sediments with basinal muds. Failure of over‐steepened basin margins and debris flow was likely to be triggered by faulting and seismic activity, and was accompanied by syn‐depositional subaqueous basaltic magmatism recorded by peperites and pillow lavas within diamictites. The thickness of diamictites reflects recurring phases of faulting, volcanism and rapid subsidence allowing continued accommodation of rapidly deposited resedimented facies well below wave base. A distal or indirect, glacial influence in the form of rare dropstones and striated clasts is evident, but tectonically‐driven mass flow destroyed any primary record of glacial climate originally present in basin margin sediments. Such basin margin settings were common during Rodinia rifting and their stratigraphy and facies record a dominant tectonic, rather than climatic, control on sedimentation. Deposition occurred on tectonic timescales inconsistent with a Snowball Earth model for Neoproterozoic diamictites involving a direct glacial contribution to deposition. 相似文献
4.
《Sedimentary Geology》1999,123(1-2):81-102
In strike-slip basins, proximal stratal patterns are a function of displacement on basin-bounding faults. In order to better understand factors that control changes in sedimentary facies and stratal patterns of the northeastern part of the Jinan Basin (Cretaceous), a strike-slip basin, we made a detailed analysis of sedimentary facies, depositional architecture and paleoflows. The sedimentary successions can be grouped into five facies associations representing five depositional environments: (1) facies association FA I (alluvial fan); (2) FA II (small-scale Gilbert-type delta); (3) FA III (large-scale, steep delta slope); (4) FA IV (base of large-scale, steep delta slope and prodelta); and (5) FA V (lacustrine plain). The successions are divided into two distinct sedimentary fills on the basis of facies associations, depositional architecture and paleocurrents: (1) marginal fill and (2) longitudinal fill. The marginal fill (ca. 3.2 km thick) is present along the strike-slip basin-bounding fault. The lower part of the marginal fill (ca. 1.3 km thick) consists of alluvial-fan deposits (FA I) along the bounding fault which are transitional northward to small-scale Gilbert-type delta (FA II) and lacustrine plain (FA V) deposits. The upper part of the marginal fill (ca. 1.9 km thick) contains large-scale, steep delta slope (FA III) and base of delta slope/prodelta (FA IV) deposits accompanied with a northward change in facies associations. In the marginal fill, the successive alluvial fan, small-scale Gilbert-type delta and large-scale, steep delta/prodelta deposits are overlapped (shingled) northeastward. The longitudinal fill (ca. 2 km thick) is characterized by eastward overlapped stacks of large-scale, steep delta slope (FA III) and base of delta slope/prodelta (FA IV) deposits with a westward progradation. The longitudinal fill was overstepped by the marginal fill. The northeastward shingled geometry of the marginal fill was most likely caused by sinistral strike-slip displacements on the basin-bounding fault. The slightly oblique (northward) progradation of the marginal fill was due to the northward basin-floor tilting. In the marginal fill, the progressive changes in facies and depositional architecture from the lower alluvial fan/small-scale Gilbert-type delta to the upper large-scale, steep delta/prodelta are suggestive of increase in basin subsidence along the strike-slip basin margin that was closely related to the variation in displacement on the basin-bounding fault. The sinistral strike-slip movements on the bounding fault also caused the eastward overlapping of the longitudinal fill. 相似文献
5.
Depositional slope systems along continental margins contain a record of sediment transfer from shallow‐water to deep‐water environments and represent an important area for natural resource exploration. However, well‐preserved outcrops of large‐scale depositional slopes with seismic‐scale exposures and tectonically intact stratigraphy are uncommon. Outcrop characterization of smaller‐scale depositional slope systems (i.e. < 700 m of undecompacted shelf‐to‐basin relief) has led to increased understanding of stratigraphic packaging of prograding slopes. Detailed stacking patterns of facies and sedimentary body architecture for larger‐scale slope systems, however, remain understudied. The Cretaceous Tres Pasos Formation of the Magallanes Basin, southern Chile, presents a unique opportunity to evaluate the stratigraphic evolution of such a slope system from an outcrop perspective. Inherited tectonic relief from a precursor oceanic basin phase created shelf‐to‐basin bathymetry comparable with continental margin systems (～1000 m). Sedimentological and architectural data from the Tres Pasos Formation at Cerro Divisadero reveal a record of continental margin‐scale depositional slope progradation and aggradation. Slope progradation is manifested as a vertical pattern exhibiting increasing amounts of sediment bypass upwards, which is interpreted as reflecting increasing gradient conditions. The well‐exposed, seismic‐scale outcrop is characterized by four 20 to 70 m thick sandstone‐rich successions, separated by mudstone‐rich intervals of comparable thickness (40 to 90 m). Sedimentary body geometry, facies distribution, internal bedding architecture, sandstone richness and degree of amalgamation were analysed in detail across a continuous 2·5 km long transect parallel to depositional dip. Deposition in the lower section (Units 1 and 2) was dominated by poorly channellized to unconfined sand‐laden flows and accumulation of mud‐rich mass transport deposits, which is interpreted as representing a base of slope to lower slope setting. Evidence for channellization and indicators of bypass of coarse‐grained turbidity currents are more common in the upper part of the > 600 m thick succession (Units 3 and 4), which is interpreted as reflecting increased gradient conditions as the system accreted basinward. 相似文献
6.
A. A. Krassay J. Domagala B. E. Bradshaw P. N. Southgate 《Australian Journal of Earth Sciences》2013,60(3):563-597
The Term, Lawn, Wide and Doom Supersequences represent tectonically driven, second‐order sedimentary accommodation sequences in the Isa Superbasin. The four supersequences are stacked to form two major depositional wedges or packages extending south from the Murphy Inlier onto the central Lawn Hill Platform. A major intrabasin structure, the Elizabeth Creek Fault Zone separates the two depositional wedges. The Term and Lawn Supersequences each form a thick, crudely fining‐upward sedimentary succession. The basal part of each supersequence comprises sand‐dominated facies, deposited under lowstand conditions. The overlying transgressive deposits comprise thick successions of carbonaceous, shale‐prone sediment that represents times of increased accommodation. Synsedimentary fault activity along the northwest‐trending Termite Range Fault and major northeast‐trending faults including the Elizabeth Creek Fault Zone resulted in overthickened sections of parts of the Term and Lawn Supersequences in regional depocentres. A regional extensional event occurred during Wide Supersequence time, and resulted in strike‐slip deformation, uplift and tilting of fault blocks and erosion of underlying Lawn sequences. This tectonic event created small, fault‐bounded depocentres, where basal silty turbidites of the Wide Supersequence are locally thickened. Denudation of fault blocks in the hinterland provided increasing coarse clastic sediment‐supply forming thick, sand‐dominated, lowstand deposits of the upper Wide Supersequence. Overall, the Wide Supersequence exhibits a coarsening‐upwards facies trend. Tectonic quiescence resulted in the accumulation of siltstone‐dominated transgressive and highstand turbidite deposits in mid‐Wide time. The base of the Doom Supersequence comprises thick, feldspathic, debris‐flow sandstones signalling a new provenance. Decreasing accommodation is reflected by coarsening‐ and shallowing‐upwards facies trends in late Doom time. Declining accommodation and the end of sedimentation in the Isa Superbasin were most likely initiated by deformation at the start of the Isan Orogeny. 相似文献
7.
Ancient stream-dominated (‘wet’) alluvial fan deposits have received far less attention in the literature than their arid/semi-arid counterparts. The Cenozoic basin fills along the Denali fault system of the northwestern Canadian Cordillera provide excellent examples of stream-dominated alluvial fan deposits because they developed during the Eocene-Oligocene temperate climatic regime in an active strike-slip orogen. The Amphitheatre Formation filled several strike-slip basins in Yukon Territory and consists of up to 1200 m of coarse siliciclastic rocks and coal. Detailed facies analysis, conglomerate: sandstone percentages (C:S), maximum particle size (MPS) distribution, and palaeocurrent analysis of the Amphitheatre Formation in two of these strike-slip basins document the transition from proximal, to middle, to distal and fringing environments within ancient stream-dominated alluvial-fan systems. Proximal fan deposits in the Bates Lake Basin are characterized by disorganized, clast-supported, boulder conglomerate and minor matrix(mud)-supported conglomerate. Proximal facies are located along the faulted basin margins in areas where C:S = 80 to 100 and where the average MPS ranges from 30 to 60 cm. Proximal fan deposits grade into middle fan, channelized, well organized cobble conglomerates that form upward fining sequences, with an average thickness of 7 m. Middle fan deposits grade basinward into well-sorted, laterally continuous beds of normally graded sandstone interbedded with trough cross-stratified sandstone. These distal fan deposits are characteristic of areas where C:S = 20 to 40 and where the average MPS ranges from 5 to 15 cm. Fan fringe deposits consist of lacustrine and axial fluvial facies. Palaeogeographic reconstruction of the Bates Lake Basin indicates that alluvial-fan sedimentation was concentrated in three parts of the basin. The largest alluvial-fan system abutted the strike-slip Duke River fault, and prograded westward across the axis of the basin. Two smaller, coarser grained fans prograded syntaxially northward from the normal-faulted southern basin margin. Facies analysis of the Burwash Basin indicates a similar transition from proximal to distal, stream-dominated alluvial fan environments, but with several key differences. Middle-fan deposits in the Burwash Basin define upward coarsening sequences 50 to 60 m thick composed of fine-grained lithofacies and coal in the lower part, trough cross-stratified sandstone in the middle, and conglomerate in the upper part of the sequence. Upward-coarsening sequences, 90–140 m thick, also are common in the fan fringe lacustrine deposits. These sequences coarsen upward from mudstone, through fine grained, ripple-laminated sandstone, to coarse grained trough cross-stratified sandstone. The upward-coarsening sequences are basinwide, facies independent, and probably represent progradation of stream-dominated alluvial-fan depositional systems. Coal distribution in the Amphitheatre Formation is closely coupled with predominant depositional processes on stream-dominated alluvial fans. The thickest coal seams occur in the most proximal part of the basin fill and in marginal lacustrine deposits. Coal development in the intervening middle and distal fan areas was suppressed by the high frequency of unconfined flow events and lateral channel mobility. 相似文献
8.
塔里木盆地库车坳陷与塔西南坳陷的白垩系沉积厚度大,岩石类型多,既有碎屑岩,又有蒸发岩和碳酸盐岩。沉积相类型丰富,包括海相、海陆交互相和陆相,并以陆相碎屑岩沉积为主。库车坳陷与塔西南坳陷在早白垩世虽为分隔性的沉积盆地,但其陆相碎屑沉积具有几乎相同的特征：均以冲积沉积体系发育为主,相带分布和储层发育具有明显的相似性。对应山前断陷盆地的不对称性,冲积扇-扇三角洲、辫状河三角洲沉积体系发育在靠近山前的陡坡一侧,正常河流三角洲沉积体系发育在湖盆缓坡一侧。冲积扇-扇三角洲沉积体系由冲积扇、扇三角洲平原、扇三角洲前缘等构成,辫状河三角洲沉积体系由辫状河三角洲平原、辫状河三角洲前缘等构成。储层主要发育于扇三角洲或辫状河三角洲的辫状河道、水下分流河道及分流河口砂坝中,在库车坳陷和塔西南坳陷都形成了优质的储集岩。砂体厚度大,分布广,储集条件好。冲积沉积体系的普遍发育预示了白垩系储集岩在盆地内的分布可能是十分广泛的。近年在喀什凹陷、英吉苏凹陷相继取得的勘探成果大大拓宽了其勘探领域,白垩系正逐渐成为盆地内主要的勘探目的层之一,展现了良好的勘探前景。 相似文献
9.
The Travenanzes Formation is a terrestrial to shallow‐marine, siliciclastic–carbonate succession (200 m thick) that was deposited in the eastern Southern Alps during the Late Triassic. Sedimentary environments and depositional architecture have been reconstructed in the Dolomites, along a 60 km south–north transect. Facies alternations in the field suggest interfingering between alluvial‐plain, flood‐basin and shallow‐lagoon deposits, with a transition from terrestrial to marine facies belts from south to north. The terrestrial portion of the Travenanzes Formation consists of a dryland river system, characterized by multicoloured floodplain mudstones with scattered conglomeratic fluvial channels, merging downslope into small ephemeral streams and sheet‐flood sandstones, and losing their entire discharge subaerially before the shoreline. Calcic and vertic palaeosols indicate an arid/semi‐arid climate with strong seasonality and intermittent discharge. The terrestrial/marine transition shows a coastal mudflat, the flood basin, which is usually exposed, but at times is inundated by both major river floods and sea‐water storm surges. Locally coastal sabkha deposits occur. The marine portion of the Travenanzes Formation comprises carbonate tidal‐flat and shallow‐lagoon deposits, characterized by metre‐scale shallowing‐upward peritidal cycles and subordinate intercalations of dark clays from the continent. The depositional architecture of the Travenanzes Formation suggests an overall transgressive pattern organized in three carbonate–siliciclastic cycles, corresponding to transgressive–regressive sequences with internal higher‐frequency sedimentary cycles. The metre‐scale sedimentary cyclicity of the Travenanzes Formation continues without a break in sedimentation into the overlying Dolomia Principale. The onset of the Dolomia Principale epicontinental platform is marked by the exhaustion of continental sediment supply. 相似文献
10.
《Sedimentary Geology》2007,193(1-4):167-192
The coarse-grained, ice-contact, Porta Subaqueous Fan/Delta Complex was deposited in glacial Lake Rinteln at the margin of the Saalian ice sheet that advanced south of the Weser Chains, NW Germany. The ice-proximal depositional system was up to 15 km long and 10 km wide. The present study deals with ice-proximal subaqueous fan deposits, which are interpreted as products of a subcritical plane-wall outflow jet that periodically passed into a supercritical jet with hydraulic jump. The proximal facies assemblage consists of the coarse, clast-supported gravelly deposits of a hyperconcentrated (high-density) effluent and of related cohesionless debris flows attributed to the conduit or immediate proximal jet outflow zone of flow establishment. The intermediate facies assemblage, attributed to the outflow jet proximal zone of flow transition, is dominated by normally graded and cross-stratified gravels with scour structures at their bases; these gravels were deposited by a high-density effluent capable of forming mouthbar-like features. These deposits pass downcurrent into an assemblage of planar parallel-stratified and planar and trough cross-stratified sands and pebbly sands (partially interpreted as antidunes), with abundant scour structures and intercalated layers of fine sand/silt and silty mud, attributed to the jet distal zone of flow transition. The distal facies assemblage consists of trough cross-stratified sands and pebbly sands, and is attributed to the outflow jet proximal zone of established flow. The sedimentary succession as a whole has wedge-shape geometry, with a gentle fan-shaped inclination of the bedding from the southeast to the southwest. Repeated vertical alternations of supercritical and subcritical deposits and muddy interlayers can be attributed to temporary fluctuations in the meltwater outflow, whereas the overall upward fining of the succession indicates a net decline of meltwater discharges. 相似文献
11.
Aggradational lobe fringes: The influence of subtle intrabasinal seabed topography on sediment gravity flow processes and lobe stacking patterns 
下载免费PDF全文
下载免费PDF全文 Yvonne T. Spychala David M. Hodgson Christopher J. Stevenson Stephen S. Flint 《Sedimentology》2017,64(2):582-608
Seabed topography is ubiquitous across basin‐floor environments, and influences sediment gravity flows and sediment dispersal patterns. The impact of steep (several degrees) confining slopes on sedimentary facies and depositional architecture has been widely documented. However, the influence of gentle (fraction of a degree) confining slopes is less well‐documented, largely due to outcrop limitations. Here, exceptional outcrop and research borehole data from Unit A of the Permian Laingsburg Formation, South Africa, provide the means to examine the influence of subtle lateral confinement on flow behaviour and lobe stacking patterns. The dataset describes the detailed architecture of subunits A.1 to A.6, a succession of stacked lobe complexes, over a palinspastically restored 22 km across‐strike transect. Facies distributions, stacking patterns, thickness and palaeoflow trends indicate the presence of a south‐east facing low angle (fraction of a degree) lateral intrabasinal slope. Interaction between stratified turbidity currents with a thin basal sand‐prone part and a thick mud‐prone part and the confining slope results in facies transition from thick‐bedded sandstones to thin‐bedded heterolithic lobe fringe‐type deposits. Slope angle dictates the distance over which the facies transition occurs (hundreds of metres to kilometres). These deposits are stacked vertically over tens of metres in successive lobe complexes to form an aggradational succession of lobe fringes. Extensive slides and debrites are present at the base of lobe complexes, and are associated with steeper restored slope gradients. The persistent facies transition across multiple lobe complexes, and the mass flow deposits, suggests that the intrabasinal slope was dynamic and was never healed by deposition during Unit A times. This study demonstrates the significant influence that even subtle basin‐floor topography has on flow behaviour and depositional architecture of submarine lobe complexes. In addition, we present a new aggradational lobe fringe facies associations and recognition criteria for subtle confinement in less well‐exposed and subsurface basin fills. 相似文献
12.
13.
新疆准噶尔盆地西北缘吐谷鲁群沉积体系分析 总被引：2，自引：0，他引：2
根据在新疆准噶尔盆地西北缘乌尔禾-夏子街地区的野外地层露头观察、追索及钻孔资料分析研究,笔者认为,该区下白垩统吐谷鲁群是一套以灰绿色砂岩和红色、棕红色泥岩组成的干燥气候条件下形成的内陆湖相碎屑沉积,发育浅水三角洲体系,主要由三角洲平原和三角洲前缘相组成.吐谷鲁群碎屑岩的碎屑粒度由下而上可分为两个大的韵律旋回,即粗-细-粗-细,反映了水体扩展到萎缩再扩展的过程.有利铀成矿的砂岩层主要集中在两个韵律旋回的底部,形成于三角洲平原分流河道、决口扇、三角洲前缘水下分流河道和水下堤环境. 相似文献
14.
Fluvial sedimentation in a salt‐controlled mini‐basin: stratal patterns and facies assemblages,Sivas Basin,Turkey 下载免费PDF全文
下载免费PDF全文 Charlotte Ribes Charlie Kergaravat Cédric Bonnel Philippe Crumeyrolle Jean‐Paul Callot André Poisson Haluk Temiz Jean‐Claude Ringenbach 《Sedimentology》2015,62(6):1513-1545
The Sivas Basin, located on the Central Anatolian Plateau in Turkey, is an elongate Oligo‐Miocene basin that contains numerous salt‐walled mini‐basins. Through field analysis, including stratigraphic section logging, facies analysis and geological mapping, a detailed tectono‐stratigraphic study of the Emirhan mini‐basin and its 2·6 km thick sediment fill has been undertaken. Three main palaeoenvironments are recognized – playa‐lake, braided stream and lacustrine – each corresponds to a relatively long‐lived depositional episode within a system that was dominated overall by the development of a distributive fluvial system. At local scale, this affects the geometry of the succession and influences facies distributions within preserved sequences. Sequences affected by wedge geometries are characterized by localized channelized sandstone bodies in the area of maximum subsidence and these pass laterally to floodplain mudstone towards the diaper; several internal unconformities are recognized. By contrast, sequences affected by hook geometries display narrow and steep drape‐fold geometries with no evidence of lateral facies change and apparent conformity in the preserved succession. The sediment fill of the Emirhan mini‐basin records the remobilization of diapir‐derived detritus and the presence of evaporitic bodies interbedded within the mini‐basin, implying the growth of salt walls expressed at the surface as palaeo‐topographic highs. The mini‐basin also records the signature of a regional change in stratigraphic assemblage, passing from playa‐lake facies to large‐scale highly amalgamated fluvial facies that represent progradation of the fluvial system. The initiation and evolution of this mini‐basin involves a variety of local and regional controls. Local factors include: (i) salt withdrawal, which influenced the rate and style of subsidence and consequently temporal and spatial variation in the stratigraphic assemblage and the stratal response related to halokinesis; and (ii) salt inflation, which influenced the topographic expression of the diapirs and consequently the occurrence of diapir‐derived detritus intercalated within the otherwise clastic‐dominated succession. 相似文献
15.
16.
Sedimentology and tectonic implications of Cretaceous fan-delta conglomerates, Queen Charlotte Islands, Canada 总被引：1，自引：0，他引：1
ROGER HIGGS 《Sedimentology》1990,37(1):83-103
The Honna Formation, of Coniacian age, consists of several hundred metres of polymictic clast-supported conglomerate associated with sandstone and mudstone. Five conglomerate facies are recognized: ungraded beds; inverse graded beds; normal graded beds; inverse-to-normal graded beds; and parallel-stratified beds. These facies are interpreted as the deposits of subaqueous cohesionless debris flows and/or high-density turbidity currents. The depositional environment was a deep-water, gravelly fan that draped a fault-controlled, basin-margin slope. The fan is inferred to have passed upslope directly into an alluvial fan (unpreserved); hence, the name fan delta can be applied to the overall depositional system. This type of fan delta, of which the Brae oilfield in the North Sea is an example, is defined here as a deep-water fan delta. The lack of a shelf is in marked contrast to other types of fan delta. Three facies associations are recognized in the Honna Formation: subaqueous proximal-fan conglomerates, distal-fan turbiditic sandstones, and pro-fan/interfan mudstones with thin sandy turbidites. The proximal fan is envisaged as an unchannelled gravel belt with a downslope length of at least 20 km; such a long subaqueous gravel belt lacks a known modern analogue. The distal fan was an unchannelled sandy extension of the proximal gravel belt. It is postulated that the Honna Formation accumulated in a foreland basin which migrated westwards from the Coast Mountains where the Wrangellia-Alexander terrane was colliding with North America. In this model, the Honna fan delta was sourced by a (west-verging) thrust sheet whose sole-thrust was the Sandspit Fault immediately to the east. Deep-water fan deltas appear to develop preferentially when eustatic sea-level is relatively high, so that the‘feeder’ alluvial fan is small, and gravelly throughout. In petroleum exploration and field development, care should be taken to distinguish deep-water fan deltas from base-of-slope (canyon-fed) submarine fans, because the two systems differ significantly in terms of coarse-sediment distribution. 相似文献
17.
MARCUS T. RICHARDS 《Sedimentology》1994,41(1):55-82
The Lower Triassic succession of Barles, Alpes de Haute Provence, France, comprises an unconformable quartz arenite sand body of 90m thickness. The succession may be informally divided into (i) lower channellized cross-bedded member overlain by (ii) an upper fining upward member. The lower member comprises vertically stacked, subtidal channel units separated into five major sand bodies by thin developments of fine grained channel margin and shoal deposits. Subtidal channel fill deposits are dominated by varying scales of cross bedding. These scales vary systematically from the base to the top of the member, with large scale planar sets dominating the lowest channel sand body (sand body 1), medium scale planar and trough cross bedding characterizing sand bodies 2-4, the largest scale planar sets in the highest sand body (sand body 5). This upward change in cross bedding scale is concomitant with a decrease in both the relief of major channel sand body erosion surfaces, and the proportion of preserved interchannel shoal deposits. The succeeding fining upward member comprises small scale tidal channel units overlain by channel shoal and tidal flat deposits. Tidal flat sequences are characterized by parallel laminated, wave and current rippled sandstones separated by bioturbated, fine grained siltstones and mudstones. The vertical variation in facies of the Lower Triassic succession suggests two main periods of deposition. The lower member is considered to preserve successively more seaward components of a transgressive estuarine complex. The overlying upper member records the seaward progradation of tidal channel, shoal and tidal flat environments. The unconformity bounded nature of the lower member, combined with its systematic variation in facies, suggests it may represent an incised valley-estuarine fill developed in response to an early Triassic relative sea level fall and subsequent rise. Succeeding tidal channel and tidal flat deposits forming the upper fining upward member reflect a change in sediment supply and/or rate of relative sea level rise comparable with a progradational shoreline. It is unclear whether this final depositional episode represents a period of highstand progradation or a later lowstand shoreline system developed following a further period of relative sea level fall and rise. 相似文献
18.
Alluvial Fan-lacustrine Sedimentation and its Tectonic Implications in the Cretaceous Athgarh Gondwana Basin, Orissa, India 总被引：1，自引：0，他引：1
The Athgarh Formation is the northernmost extension of the east coast Upper Gondwana sediments of Peninsular India. The formation of the present area is a clastic succession of 700 m thick and was built against an upland scarp along the north and northwestern boundary of the basin marked by an E-W-ENE-WSW boundary fault. A regular variation in the dominant facies types and association of lithofacies from the basin margin to the basin centre reveals deposition of the succession in an alluvial fan environment with the development of proximal, mid and distal fan subenvironments with the distal part of the fan merging into a lake. Several fans coalesced along the basin margin, forming a southeasterly sloping, broad and extensive alluvial plain terminating to a lake in the centre of the basin. Aggradation of fans along the subsiding margin of the basin resulted in the Athgarh succession showing remarkable lateral facies change in the down-dip direction. The proximal fan conglomerates pass into the sandstone-dominated mid-fan deposits, which, in turn, grade into the cyclic sequences of sandstone-mudstone of the distal fan origin. Further downslope, thick sequence of lacustrine shales occur. The faulted boundary condition of the basin and a thick pile of lacustrine sediments at the centre of the basin suggest that tectonism both in the source area and depositional site has played an important role throughout the deposition of the Athgarh succession of the present area. The vertical succession fines upward with the coarse proximal deposits at the base and fine distal deposits at the top, suggesting deposition of the succession during progressive reduction of the source area relief after a single rapid uplift related to a boundary fault movement.The NW-SE trending fault defining the Son-Mahanadi basin of Lower Gondwana sediments are shear zones of great antiquity and these were rejuvenated under neo-tensional stress during Lower Gondwana sedimentation. The E-W-ENE-WSW trending fault of the Athgarh basin, on the other hand, define tensional rupture of much younger date. In the Early Cretaceous period, there was a reversal of palaeoslope in the Athgarh basin (southward slope) with respect to the Son-Mahanadi basin (northward slope). During the phase drifting of the Indian continent and with the evolution of Indian Ocean in the Early Cretaceous period, the tectonic events in the plate interior was manifested by formation of new grabens like the Athgarh graben. 相似文献
19.
Turbidites in the Upper Carboniferous Ross Formation, western Ireland: reconstruction of a channel and spillover system 总被引：2，自引：0，他引：2
ABSTRACT The Upper Carboniferous deep‐water rocks of the Shannon Group were deposited in the extensional Shannon Basin of County Clare in western Ireland and are superbly exposed in sea cliffs along the Shannon estuary. Carboniferous limestone floors the basin, and the basin‐fill succession begins with the deep‐water Clare Shales. These shales are overlain by various turbidite facies of the Ross Formation (460 m thick). The type of turbidite system, scale of turbidite sandstone bodies and the overall character of the stratigraphic succession make the Ross Formation well suited as an analogue for sand‐rich turbidite plays in passive margin basins around the world. The lower 170 m of the Ross Formation contains tabular turbidites with no channels, with an overall tendency to become sandier upwards, although there are no small‐scale thickening‐ or thinning‐upward successions. The upper 290 m of the Ross Formation consists of turbidites, commonly arranged in thickening‐upward packages, and amalgamated turbidites that form channel fills that are individually up to 10 m thick. A few of the upper Ross channels have an initial lateral accretion phase with interbedded sandstone and mudstone deposits and a subsequent vertical aggradation phase with thick‐bedded amalgamated turbidites. This paper proposes that, as the channels filled, more and more turbidites spilled further and further overbank. Superb outcrops show that thickening‐upward packages developed when channels initially spilled muds and thin‐bedded turbidites up to 1 km overbank, followed by thick‐bedded amalgamated turbidites that spilled close to the channel margins. The palaeocurrent directions associated with the amalgamated channel fills suggest a low channel sinuosity. Stacks of channels and spillover packages 25–40 m thick may show significant palaeocurrent variability at the same stratigraphic interval but at different locations. This suggests that individual channels and spillover packages were stacked into channel‐spillover belts, and that the belts also followed a sinuous pattern. Reservoir elements of the Ross system include tabular turbidites, channel‐fill deposits, thickening‐upward packages that formed as spillover lobes and, on a larger scale, sinuous channel belts 2·5–5 km wide. The edges of the belts can be roughly defined where well‐packaged spillover deposits pass laterally into muddier, poorly packaged tabular turbidites. The low‐sinuosity channel belts are interpreted to pass downstream into unchannellized tabular turbidites, equivalent to lower Ross Formation facies. 相似文献
20.
为揭示白云凹陷文昌组构造演化与沉积充填间的耦合关系,基于三维地震数据和钻井、测井资料,采用层序原形结构剖面恢复、增强地震相分析、砂体地震扫描解释等新方法,对白云凹陷文昌组构造演化及其控制下的沉积充填过程进行了详细研究. 研究表明,响应于控凹断层“弱?极强?较强?弱”的活动过程,文昌组沉积期白云凹陷经历了初始断陷期（WCSQ1）、强断陷早期（WCSQ2）、强断陷晚期（WCSQ3）和弱断陷期（WCSQ4、WCSQ5）4个构造演化阶段. 相应地,白云主洼经历了河流?湖泊、超深湖发生、超深湖充填、深湖?浅湖发生等沉积演化过程. 其中旋转断块翘倾侧的北部缓坡带主要为河流?浅湖过渡环境,发育大?中型辫状河三角洲沉积体系;断块倾没侧的南部陡坡带主要为半深湖?深湖环境,发育近岸水下扇?扇三角洲沉积体系;湖盆中心为深湖?超深湖环境,以泥岩沉积为主,深湖区周缘发育湖底扇沉积;同时期白云东洼为陡坡+岩浆底侵形成的多隆洼地貌,以小型近岸水下扇?扇三角洲沉积体系为主,局部发育火山碎屑沉积. 文昌组沉积砂体的孔隙性受白云凹陷控凹断裂和岩浆的活动强度、物源体系及次级洼陷古地理特征等因素共同控制. 相似文献