首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 640 毫秒
1.
In this study we propose a regression model for the estimation of lunar elemental abundances from spectral features extracted from Clementine multispectral imagery in the visible and near-infrared domain. We extract a set of spectral features, including the continuum slope, the FWHM of the ferrous absorption trough near 1000 nm, and the wavelengths and relative depths of the absorption minima and inflection points present in the trough. As a “ground truth” for the elemental abundances we rely on the Lunar Prospector gamma ray spectrometer (LP GRS) data. With respect to the elemental abundances of the Apollo and Luna landing sites independently derived from returned samples, the best examined regression model is a second-order polynomial. The proposed regression-based approach allows an estimation of the elemental abundances of Ca, Al, Fe, Mg, and O at an accuracy of about 1 wt% and some tenths of a weight percent for Ti. We examine the influence of calibration of the Clementine UVVIS+NIR data and find that its effect on the results obtained with the regression approach is minor. Furthermore, we define a three-endmember model which allows the petrographic mapping of the lunar surface materials in terms of their Fe, Mg, and Al abundances. We examine the global distribution of Mg-rich rocks, the distribution of cryptomaria, and the occurrence of aluminous mare basalts in the Frigoris region. A possible regional compositional anomaly in northwestern Oceanus Procellarum is found, which corresponds to an extended area displaying spectral characteristics consistent with mare basalt containing significant amounts of olivine. On local scales, we examine in terms of our regression model the highland craters Proclus and Tycho, the compositionally anomalous central peaks of the craters Copernicus and Bullialdus, and the pyroclastic deposits on the floor of Alphonsus and on the northern rim of Petavius. As a general result, we show that the regression-based approach allows the detection of the main lunar terrain classes and rock types based on multispectral imagery in the visible and near-infrared domain.  相似文献   

2.
We describe the future SMART-1 European Space Mission whose objective is to study the lunar surface from a polar lunar orbit. In particular, it is anticipated that selected regions of the Moon will be photographed using the AMIE camera with a mean spatial resolution of about 100 m in three spectral channels (0.75, 0.92, and 0.96 m) over a wide range of phase angles. Since these spectral channels and the AMIE resolution are close to those of the UVVIS camera onboard the Clementine spacecraft, the simultaneous processing of SMART-1 and Clementine data can be planned, for example, to obtain phase-ratio images. These images carry information on the structural features of the lunar surface. In particular, UVVIS/Clementine data revealed a photometric anomaly at the Apollo-15 landing site associated with the blowing of the lunar regolith by the lander engine. Anomalies were found in the ejection zones of several fresh craters.  相似文献   

3.
Major elements such as Fe,Ti,Mg,Al,Ca and Si play very important roles in understanding the origin and evolution of the Moon.Previous maps of these major elements derived from orbital data are based on mosaic images or low-resolution gamma-ray data.The hue variations and gaps among orbital boundaries in the mosaic images are not conducive to geological studies.This paper aims to produce seamless and homogenous distribution maps of major elements using the single-exposure image of the whole lunar disk obtained by China’s high-resolution geostationary satellite,Gaofen-4,with a spatial resolution of500 m.The elemental contents of soil samples returned by Apollo and Luna missions are regarded as ground truth,and are correlated with the reflectance of the sampling sites extracted from Gaofen-4 data.The final distribution maps of these major oxides are generated with the statistical regression model.With these products,the average contents and proportions of the major elements for maria and highlands were estimated and compared.The results showed that Si O2 and Ti O2 have the highest and lowest fractions in mare and highland areas,respectively.Moreover,the relative concentrations of these elements could serve as indicators of geologic processes,e.g.,the obviously asymmetric distributions of Al2 O3,Ca O and Si O2 around Tycho crater may suggest that Tycho crater was formed by an oblique impact from the southwest direction.  相似文献   

4.
The C1XS X-ray Spectrometer on Chandrayaan-1   总被引：1，自引：0，他引：1  
The Chandrayaan-1 X-ray Spectrometer (C1XS) is a compact X-ray spectrometer for the Indian Space Research Organisation (ISRO) Chandrayaan-1 lunar mission. It exploits heritage from the D-CIXS instrument on ESA's SMART-1 mission. As a result of detailed developments to all aspects of the design, its performance as measured in the laboratory greatly surpasses that of D-CIXS. In comparison with SMART-1, Chandrayaan-1 is a science-oriented rather than a technology mission, leading to far more favourable conditions for science measurements. C1XS is designed to measure absolute and relative abundances of major rock-forming elements (principally Mg, Al, Si, Ca and Fe) in the lunar crust with spatial resolution ?25 FWHM km, and to achieve relative elemental abundances of better than 10%.  相似文献   

5.
The mineralogy of a planetary surface is a diagnostic product of its formation and geologic evolution. Global assessment of lunar mineralogy at high spatial resolution has been a long standing goal of lunar exploration. Currently, the only global data available for such study is multispectral imagery from the Clementine mission. We use the detailed compositional, petrographic, and spectroscopic data of lunar soils produced by the Lunar Soil Characterization Consortium to explore the use of multispectral imaging as a diagnostic tool. We compare several statistically optimized formulations of links between spectral and mineral parameters and apply them to Clementine UV-VIS data. The most reliable results are for estimations of pyroxene abundance and maturity parameters (agglutinate abundance, Is/FeO). Estimations of different pyroxene composition (low-Ca versus high-Ca) appear good in a relative sense, but absolute values are limited by residual wavelength dependent Clementine photometric calibrations. Since the signal-to-noise of Clementine multispectral data is good at the 1-km scale, almost any combination of parameters that capture inherent spectral variance can provide spatially coherent maps, although the parameters may not actually be directly related to composition. Clementine estimates are useful for identifying scientific or exploration targets for imaging spectrometer sensors of the next generation that are specifically designed to characterize mineralogy.  相似文献   

6.
The Chandrayaan-1 X-ray Spectrometer (C1XS) flown on-board the first Indian lunar mission Chandrayaan-1, measured X-ray fluorescence spectra during several episodes of solar flares during its operational period of ∼9 months. The accompanying X-ray Solar Monitor (XSM) provided simultaneous spectra of solar X-rays incident on the Moon which are essential to derive elemental chemistry. In this paper, we present the surface abundances of Mg, Al, Si, Ca and Fe, derived from C1XS data for a highland region on the southern nearside of the Moon. Analysis techniques are described in detail including absolute X-ray line flux derivation and conversion into elemental abundance. The results are consistent with a composition rich in plagioclase with a slight mafic mineral enhancement and a Ca/Al ratio that is significantly lower than measured in lunar returned samples. We suggest various possible scenarios to explain the deviations.  相似文献   

7.
The D-CIXS X-ray spectrometer on ESA's SMART-1 mission will provide the first global coverage of the lunar surface in X-rays, providing absolute measurements of elemental abundances. The instrument will be able to detect elemental Fe, Mg, Al and Si under normal solar conditions and several other elements during solar flare events. These data will allow for advances in several areas of lunar science, including an improved estimate of the bulk composition of the Moon, detailed observations of the lateral and vertical nature of the crust, chemical observations of the maria, investigations into the lunar regolith, and mapping of potential lunar resources. In combination with information to be obtained by the other instruments on SMART-1 and the data already provided by the Clementine and Lunar Prospector missions, this information will allow for a more detailed look at some of the fundamental questions that remain regarding the origin and evolution of the Moon.  相似文献   

8.
The UK-built Chandrayaan-1 X-ray Spectrometer (C1XS) will fly as an ESA instrument on India's Chandrayaan-1 mission to the Moon, launched in October 2008. C1XS builds on experience gained with the earlier D-CIXS instrument on SMART-1, but will be a scientifically much more capable instrument. Here we describe the scientific objectives of this instrument, which include mapping the abundances of the major rock-forming elements (principally Mg, Al, Si, Ti, Ca and Fe) in the lunar crust. These data will aid in determining whether regional compositional differences (e.g., the Mg/Fe ratio) are consistent with models of lunar crustal evolution. C1XS data will also permit geochemical studies of smaller scale features, such as the ejecta blankets and central peaks of large impact craters, and individual lava flows and pyroclastic deposits. These objectives all bear on important, and currently unresolved, questions in lunar science, including the structure and evolution of any primordial magma ocean, as revealed by vertical and lateral geochemical variations in the crust, and the composition of the lunar mantle, which will further constrain theories of the Moon's origin, thermal history and internal structure.  相似文献   

9.
The distribution of minerals on the lunar surface is information which could contribute to studying lunar origin and evolution. In this paper, the distribution of clinopyroxene, orthopyroxene, olivine, ilmenite, and plagioclase on the lunar surface has been mapped based on Hapke radiative transfer model and linear unmixing of spectra with Clementine UVVIS/NIR data. The results have been validated on the basis of minerals modal abundance data of the Apollo samples, and problems in the minerals abundance mapping have been analyzed. The validation based on analysis data of Apollo samples indicates that plagioclase mapped in this paper represents the total abundance of plagioclase and agglutinitic glass. The minerals mapping results show that the lunar surface is mainly composed of pyroxene, plagioclase, agglutinitic glass, and ilmenite. Basalt in the lunar mare is mainly composed of clinopyroxene and ilmenite, and lunar highland is mainly composed of plagioclase and agglutinitic glass. Orthopyroxene is mainly distributed on the north of Mare Imbrium, on the south of Maria and Aitken Basin. According to our results, there is probably no large area of olivine distribution on the lunar surface which is different from earlier published results. Therefore, emphasis should be put on the olivine distribution in the minerals mapping using hyperspectral data such as M3 of Chandrayaan-1 and IIM of ChangE-1.  相似文献   

10.
Abstract— Lunar meteorite Queen Alexandra Range 93069 is a clast-rich, glassy-matrix regolith breccia of ferroan, highly aluminous bulk composition. It is similar in composition to other feldspathic lunar meteorites but differs in having higher concentrations of siderophile elements and incompatible trace elements. Based on electron microprobe analyses of the fusion crust, glassy matrix, and clasts, and instrumental neutron activation analysis of breccia fragments, QUE 93069 is dominated by nonmare components of ferroan, noriticanorthosite bulk composition. Thin section QUE 93069,31 also contains a large, impact-melted, partially devitrified clast of magnesian, anorthositic-norite composition. The enrichment in Fe, Sc, and Cr and lower Mg/Fe ratio of lunar meteorites Yamato 791197 and Yamato 82192/3 compared to other feldspathic lunar meteorites can be attributed to a small proportion (5–10%) of low-Ti mare basalt. It is likely that the nonmare components of Yamato 82192/3 are similar to and occur in similar abundance to those of Yamato 86032, with which it is paired. There is a significant difference between the average FeO concentration of the lunar highlands surface as inferred from the feldspathic lunar meteorites (mean: ～5.0%; range: 4.3–6.1%) and a recent estimate based on data from the Clementine mission (3.6%).  相似文献   

11.
Abstract— The bulk chemical composition of Orgueil and 25 other carbonaceous chondrites was determined by x‐ray fluorescence analysis. The sample sizes of the analyzed meteorites were in all cases 120 mg. The abundances of P and Ti in Orgueil and Ivuna were precisely determined by the standard addition method. The new P CI abundance is 926 ± 65 ppm. Excluding the low P of Ivuna and one Orgueil sample with unusual chemistry gives a CI P content of 930 ± 23 ppm. A CI abundance of 926 ppm corresponds to a P/Si wt ratio of 8.66 times 10?3 (atomic ratio 7.85 times 10?3). For Ti a CI content of 458 ± 18 ppm and a Ti/Si wtratio of 4.28 times 10?3 (atomic ratio 2.51 times 10?3) were found. A Si content of 10.69% was obtained for average CI. The new P CI abundance is 20 to 30% below earlier estimates, while the Ti CI abundance is in agreement with earlier determinations. From the results of the analyses of bulk carbonaceous chondrites it is concluded: (1) Refractory element/Mg ratios increase from CI through CM and C3O to C3V, but ratios among Al, Ca and Ti are constant, except for low Ca/Al ratios in the reduced subgroup of C3V. (2) The Si/Mg ratios are constant in all groups of carbonaceous chondrites. (3) There is a volatility related depletion of Cr and Fe, but the Cr/Fe ratios are constant. (4) The sequence of volatility related depletions of the moderately volatile elements P, Au, As, Mn, and Zn follows condensation temperatures (except for As), if in condensation calculations non‐ideal solid solution in the host phase is considered.  相似文献   

12.
Abundances of O, Na, Mg, Al, Si, K, Ca, Sc, Ti, V, Cr, Fe, Ni and Ba are determined for 30 nearby lower-main-sequence stars in the Northern sky using high-resolution, high signal-to-noise ratio spectra. Our results show an equilibrium of  [Fe/H]I  and  [Fe/H]II  and a much smaller star-to-star scatter of the abundance ratios as a function of metallicity compared with the results of Kotoneva et al. The non-local thermodynamic equilibrium (non-LTE) corrections for oxygen are considered and found to be small  (∼−0.04 dex)  . A flat trend of [O/Fe] exists over the whole metallicity range. The non-LTE effects for some important elements are discussed, and it is found that the abundance pattern for our programme stars is very similar to that of F and G dwarfs.  相似文献   

13.
In the Chang'e-3 mission, the Active Particle-induced X-ray Spectrometer(APXS) on the Yutu rover is used to analyze the chemical composition of lunar soil and rock samples. APXS data are only valid are only if the sensor head gets close to the target and integration time lasts long enough. Therefore, working distance and integration time are the dominant factors that affect APXS results. This study confirms the ability of APXS to detect elements and investigates the effects of distance and time on the measurements. We make use of a backup APXS instrument to determine the chemical composition of both powder and bulk samples under the conditions of different working distances and integration times. The results indicate that APXS can detect seven major elements, including Mg, Al, Si, K, Ca, Ti and Fe under the condition that the working distance is less than 30 mm and having an integration time of 30 min. The statistical deviation is smaller than 15%. This demonstrates the instrument's ability to detect major elements in the sample. Our measurements also indicate the increase of integration time could reduce the measurement error of peak area, which is useful for detecting the elements Mg, Al and Si. However, an increase in working distance can result in larger errors in measurement, which significantly affects the detection of the element Mg.  相似文献   

14.
The abundances of the light (Na to Ca) elements in disc and halo stars are reviewed. New analyses are emphasized. Elements considered are the α-nuclei (Mg, Si, and Ca), and the odd-even nuclei (Na and Al, also25Mg and26Mg). The α-nuclei are overabundant (relative to Fe) in the old disc and halo stars. Halo stars ([Fe/H] < —1.2) have [α/Fe] ∼0.3 with extreme halo ([Fe/H] ≲ −2.0) stars showing possibly higher overabundances. The scatter in [α/Fe] at a given [Fe/H] is small. To within the observational errors, the abundance patterns for Mg, Si, and Ca are identical. For disc stars, the Na and Al abundances relative to Mg are almost independent of the [Fe/H]. Halo stars ([Fe/H] < −1) show [Na/Mg] < 0 and [AI/Mg] < 0, but the form of the mean relation and the scatter about the relation between [odd-even/Mg] and [Fe/H] remains uncertain.  相似文献   

15.
We present high spatial resolution X-ray spectroscopy of the supernova remnant Cassiopeia A with the Chandra observations. The X-ray emitting region of this remnant was divided into 38 × 34 pixels of 10″× 10″ each. Spectra of 960 pixels were created and fitted with an absorbed two component non-equilibrium ionization model. From the results of the spectral analysis we obtained maps of absorbing column density, temperatures, ionization ages, and the abundances of Ne, Mg, Si, S, Ca and Fe. The Si, S and possibly Ca abundance maps show obvious jet structures, while Fe does not follow the jet but seems to be distributed perpendicular to it. The abundances of Si, S and Ca show tight correlations between one another over a range of about two dex. This suggests that they are ejecta from explosive Oburning and incomplete Si-buming. Meanwhile, the Ne abundance is well correlated with that of Mg, indicating them to be the ashes of explosive C/Ne burning. The Fe abundance is positively correlated with that of Si when the latter is lower than 3 times the solar value, and is negatively correlated when higher. We suggest that such a two phase correlation is due to the different ways in which Fe was synthesized.  相似文献   

16.
Remotely sensed observations from recent missions (e.g., GRAIL, Kaguya, Chandrayaan‐1) have been interpreted as indicating that the deep crust and upper mantle are close to or at the lunar surface in many large impact basins (e.g., Crisium, Apollo, Moscoviense). If this is correct, the capability of either impact or volcanic processes to transport mantle lithologies to the lunar surface should be enhanced in these regions. Somewhat problematic to these observations and interpretations is that examples of mantle lithologies in the lunar sample collection (Apollo Program, Luna Program, lunar meteorites) are at best ambiguous. Dunite xenoliths in high‐Ti mare basalt 74275 are one of these ambiguous examples. In this high‐Ti mare basalt, olivine occurs in three generations: olivine associated with dunite xenoliths, olivine megacrysts, and olivine microphenocrysts. The dunite xenoliths are anhedral in shape and are generally greater than 800 μm in diameter. The interior of the xenoliths are fairly homogeneous with regard to many divalent cations. For example, the Mg# (Mg/Mg + Fe × 100) ranges from 82 to 83 in their interiors and decreases from 82 to 68 over the 10–30 μm wide outer rim. Titanium and phosphorus X‐ray maps of the xenolith illustrate that these slow diffusing elements preserve primary cumulate zoning textures. These textures indicate that the xenoliths consist of many individual olivine grains approximately 150–200 μm in diameter with low Ti, Al, and P cores. These highly incompatible elements are enriched in the outer Fe‐rich rims of the xenoliths and slightly enriched in the rims of the individual olivine grains. Highly compatible elements in olivine such as Ni exhibit a decrease in the rim surrounding the xenolith, an increase in the incompatible element depleted cores of the individual olivine grains, and a slight decrease in the “interior rims” of the individual olivine grains. Inferred melt composition, liquid lines of descent, and zoning profiles enable the reconstruction of the petrogenesis of the dunite xenoliths. Preservation of primary magmatic zoning (Ti, P, Al) and lack of textures similar to high‐pressure mineral assemblages exhibited by the Mg‐suite (Shearer et al. 2015) indicate that these xenoliths do not represent deep crustal or shallow mantle lithologies. Further, they are chemically and mineralogically distinct from Mg‐suite dunites identified from the Apollo 17 site. More likely, they represent olivine cumulates that crystallized from a low‐Ti mare basalt at intermediate to shallow crustal levels. The parent basalt to the dunite xenolith lithology was more primitive than low‐Ti basalts thus far returned from the Moon. Furthermore, this parental magma and its more evolved daughter magmas are not represented in the basalt sample suite returned from the Taurus‐Littrow Valley by the Apollo 17 mission. The dunite xenolith records several episodes of crystallization and re‐equilibration. During the last episode of re‐equilibration, the dunite cumulate was sampled by the 74275 high‐Ti basalt and transported over a period of 30–70 days to the lunar surface.  相似文献   

17.
We suggest a technique to determine the chemical and mineral composition of the lunar surface using artificial neural networks (ANNs). We demonstrate this powerful non-linear approach for prognosis of TiO2 abundance using Clementine UV-VIS mosaics and Lunar Soil Characterization Consortium data. The ANN technique allows one to study correlations between spectral characteristics of lunar soils and composition parameters without any restrictions on the character of these correlations. The advantage of this method in comparison with the traditional linear regression method and the Lucey et al. approaches is shown. The results obtained could be useful for the strategy of analyzing lunar data that will be acquired in incoming lunar missions especially in case of the Chandrayaan-1 and Lunar Reconnaissance Orbiter missions.  相似文献   

18.
The main goal of the gamma-ray spectrometer(GRS) onboard Chang'E1(CE-1) is to acquire global maps of elemental abundances and their distributions on the moon,since such maps will significantly improve our understanding of lunar formation and evolution.To derive the elemental maps and enable research on lunar formation and evolution,raw data that are received directly from the spacecraft must be converted into time series corrected gamma-ray spectra.The data correction procedures for the CE-1 GRS time series...  相似文献   

19.
We obtain the chemical abundances of six barium stars and two CH subgiant stars based on the high signal-to-noise ratio and high resolution Echelle spectra. The neu- tron capture process elements Y, Zr, Ba, La and Eu show obvious overabundances relative to the Sun, for example, their [Ba/Fe] values are from 0.45 to 1.27. Other elements, in- cluding Na, Mg, A1, Si, Ca, Sc, Ti, V, Cr, Mn and Ni, show comparable abundances to the Solar ones, and their [Fe/H] covers a range from -0.40 to 0.21, which means they belong to the Galactic disk. The predictions of the theoretical model of wind accretion for bi- nary systems can explain the observed abundance patterns of the neutron capture process elements in these stars, which means that their overabundant heavy-elements could be caused by accreting the ejecta of AGB stars, the progenitors of present-day white dwarf companions in binary systems.  相似文献   

20.
Z.C. Ling  Alian Wang 《Icarus》2011,211(1):101-113
Laser Raman spectroscopy is used to investigate four lunar soils, focusing on mineralogy of grains of <45 μm size. Apollo samples 14163, 15271, 67511, and 71501 were selected as endmembers to study, based on their soil chemistry, maturity, and sample locations. Typical Raman spectral features for major and minor lunar minerals are discussed on the basis of major vibrational modes. We used the Raman peak shift to calculate Mg/(Mg + Fe + Ca) and Ca/(Mg + Fe + Ca) for pyroxene and Mg/(Mg + Fe) for olivine, and thus obtained the compositional distributions of these two minerals in each of the four lunar soils. Classification of feldspar grains was made based on recognition of their Raman patterns. A Raman point-counting procedure was applied to derive mineral modes of the soils, and these are found to be consistent with published modal analysis of these soils. The compositional distributions of pyroxene and olivine grains in each soil sample, as well as the mineral modes, reflect characteristics of the main source materials for these soils. Raman patterns and peak positions also reflect shock effects on plagioclase and quartz, found in 14163.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号