首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 788 毫秒
1.
The soil resistance developed during temperature- and pressure-induced large lateral movements of shallowly embedded subsea flowlines is an important input parameter for the structural design process. A major source of uncertainty in calculation of the soil resistance is the undrained shear strength of the soil berm produced as the flowline moves across the seabed, which is affected by the level of remoulding. To investigate the effect of pipeline embedment and displacement amplitude on the shear strength of the berm, a set of centrifuge model tests was conducted on kaolin clay, involving laterally moving pipelines with constant embedments in the range 5%–35% of the pipe diameter. Back-analysis of the test results, using finite element limit analysis, showed that the shear strength of the soil berm is a function of pipe displacement amplitude, pipe embedment, and soil sensitivity. On the basis of these results, we propose that the overall berm undrained shear strength may be determined as a convolution of the shear strengths of its constituent soil elements. Finally, a formula is presented for calculating the shear strength of soil elements within the soil berm, and this is used to back-analyse the overall soil berm resistance from the model tests.  相似文献   

2.
The deformation behavior and shear strength of soft marine clays subjected to wave or traffic loads are different from that in triaxial loading due to the changes of major principal stress direction β and intermediate principal stress coefficient b. To investigate the anisotropy affected by β and b in natural soft marine clay, a series of drained tests were conducted by hollow cylinder apparatus. The principal stress direction relative to vertical direction were maintained constant under an increasing shear stress, with fixed intermediate principal stress coefficient b. The influence of the b and β on anisotropy of typically Wenzhou intact clay is discussed. It was found that octahedral stress–strain relationships expressed anisotropy with different b and β. The friction angle and deviator stress ratio with different b and β were presented to provide guidance for engineering projects in the coastal zone.  相似文献   

3.
This paper proposes a modified-theoretical approach to interpreting the undrained shear strength from piezocone tests in clays. Assuming the shear and normal stresses on the cone face to be the friction at the cone–soil interface and the ultimate expansion pressure, respectively, an expression of the tip resistance is first derived at force equilibrium. The undrained shear strength is then determined by combining the derived expression of tip resistance with the formulation for pore pressure at the cone shoulder position. Many factors, such as the penetration rate and the cone roughness, are considered in this model. Different shaped model penetrometers, including cone- and ball-shaped ones, are adopted in centrifuge tests to investigate the validity of the proposed method. The undrained shear strength estimated from the piezocone test is found to agree well with that from ball penetrometer test. Case studies are also presented to show the application of the proposed method. Comparisons between the predicted and measured values of undrained shear strength indicate that the proposed approach is generally applicable for nonfissured clays, especially intact clays.  相似文献   

4.
鉴于海底浅表层软黏土强度测试精细化程度不足的现状,引入流体测试中的流变仪,对青岛海域海底浅表层软黏土开展多组原状和重塑试样的不排水剪切强度试验,通过对比静力触探和微型十字板测试结果,验证了流变仪测试方法的有效性。基于流变仪试验结果,揭示了海底软黏土原状和重塑状态下不排水剪切破坏模式,探讨了海底软黏土不排水剪切强度和灵敏度随埋深及液性指数的发展演变趋势,评价了软黏土的结构性特征。最后,引入含水率与液限之比对海底浅表层软黏土重塑不排水剪切强度进行了归一化分析,为近海海洋开发活动提供技术支撑。  相似文献   

5.
浅层沉积物不排水抗剪强度（Su）是深水作业的关键参数之一。为了获取南海神狐海域首次海域天然气水合物试采区W18-19框体的基本工程地质特征，试采工程准备阶段开展了原位孔压静力触探测试（CPTU）及大量的室内实验。本文将主要基于CPTU计算不排水抗剪强度的基本模型，采用微型十字板、电动十字板、袖珍贯入仪及不固结不排水三轴实验，确定该区域不排水抗剪强度的基本模式，并提出适用于南海神狐钙质黏土层的不排水抗剪强度纵向分布规律计算模型，对该区域水合物上覆层的不排水抗剪强度进行预测。 结果表明，基于总锥端阻力、有效锥端阻力、超孔隙压力的模型系数分为13.8、4.2、14.4。综合考虑地层压实效应和含气情况，本文提出的分段函数预测模型与室内结果的一致性较好，可用于工程设计阶段进行工区不排水抗剪强度纵向分布规律的预测。另外，基于有效锥端阻力的不排水抗剪强度经验模型适应于浅层极软-较硬压实的钙质粘土层，基于超孔隙压力的不排水抗剪强度模型适用于较硬-坚硬的不含气层，而基于总锥端阻力的不排水抗剪强度计算模型则适用于坚硬含气的钙质黏土层。本文提出的分段函数模型有效的提高了经验模型在南海神狐水合物赋存区的适用性，计算结果可为工程安全评价提供支撑。  相似文献   

6.
Subsea pipelines are important facilities in offshore oil and gas industry to transport High-Pressure and High-Temperature (HPHT) hydrocarbon. They are often exerted by cyclic thermal loading through the whole operational life, which may trigger asymmetry in the effective axial force (EAF) profile, leading to a global axial movement, defined as ‘pipeline walking’. It may cause the downtime and structural risks, since this directional accumulation in axial movement results in the overstressing of end connection, loss of tension in a steel catenary riser (SCR) and other issues in the field, therefore subsea pipeline design requires a reliable estimate of the global pipeline walking rate. Current design methods adopt a constant soil friction coefficient and ignore variations in soil-pipeline interaction with time during the heating up and cooling down processes. In reality, the overlooked changing soil friction is important, and may alter the pipeline walking behaviours. To achieve an accurate assessment of pipeline walking, this paper advances the conventional design practice, by introducing a time-dependent axial soil friction function, to examine the pipeline walking behaviour over the operational thermal cycles. A suite of time-dependent matrixes is provided to reveal the development of the expansion/contraction of the pipeline, the corresponding mobilised soil frictions and the EAF profile. The significant nonlinear EAF profile in response to the time-dependent soil friction is examined, and is used to well assess the accumulation in pipeline walking rate. The proposed analytical framework is applied into case studies to demonstrate its validity and applicability in practice.  相似文献   

7.
A semi-analytical method of the stress-strain analysis of buried steel pipelines under submarine landslides was proposed, considering the nonlinearities of the pipe-soil interaction and mechanical properties of the pipe steel. The pipeline was divided into three parts according to different loading conditions, and the corresponding differential equations were established based on a combination of the beam-on-elastic foundation and elastoplastic-beam theories. According to the second-order central difference method, the transverse horizontal displacement was calculated, and then the bending strain was obtained based on the relation between bending strains and curvatures. Considering the interaction between the axial and bending strains, the axial strain can be derived from the equilibrium condition by equating the axial force. The proposed method was verified through the comparison of obtained solutions to ANSYS results, with minor deviations which do not exceed about 4.6%. Additionally, the effects of the slide width, the buried depth of pipelines, the internal friction angle of soils, the cohesion of soils and the bulk density of soils are investigated through parametric studies.  相似文献   

8.
The soft clay of Ariake Bay, in western Kyushu, Japan covers several hundred square kilometers. Ariake clay consists of the principal clay minerals namely smectite, illite, kaolinite and vermiculite, and other minerals in lesser quantity. The percentage of the principal clay mineral can vary significantly. The percent clay size fraction and the salt concentration can also vary significantly. In view of the importance of undrained shear strength in geotechnical engineering practice, its behavior has been studied with respect to variation in salt concentration. Basically two mechanisms control the undrained strength in clays, namely (a) cohesion or undrained strength is due to the net interparticle attractive forces, or (b) cohesion is due to the viscous nature of the double layer water. Concept (a) operates primarily for kaolinitic soil, and concept (b) dominates primarily for montmorillonitic soils. In Ariake clay, different clay minerals with different exchangeable cations and varying ion concentration in the pore water and varying nonclay size fraction are present. In view of this while both concepts (a) and (b) can coexist and operate simultaneously, one of the mechanisms dominates. For Isahaya clay, concept (a), factors responsible for an increase in level of flocculation and attractive forces result in higher undrained strength. Increase in salt concentration increases the remolded undrained strength at any moisture content. For Kubota and Kawazoe clays, concept (b) factors responsible for an expansion of diffuse double layer thickness, resulting in higher viscous resistance, increase the undrained shear strength, that is, as concentration decreases, the undrained strength increases at any moisture content. The liquid limit of Isahaya clay increases with increase in ion concentration and a marginal decrease is seen for both Kubota and Kawazoe clays, and their behavior has been explained satisfactorily.  相似文献   

9.
A caisson breakwater is built on soft foundations after replacing the upper soft layer with sand. This paper presents a dynamic finite element method to investigate the strength degradation and associated pore pressure development of the intercalated soft layer under wave cyclic loading. By combining the undrained shear strength with the empirical formula of overconsolidation clay produced by unloading and the development model of pore pressure, the dynamic degradation law that describes the undrained shear strength as a function of cycle number and stress level is derived. Based on the proposed dynamic degradation law and M-C yield criterion, a dynamic finite element method is numerically implemented to predict changes in undrained shear strength of the intercalated soft layer by using the general-purpose FEM software ABAQUS, and the accuracy of the method is verified. The effects of cycle number and amplitude of the wave force on the degradation of the undrained shear strength of the intercalated soft layer and the associated excess pore pressure response are investigated by analyzing an overall distribution and three typical sections underneath the breakwater. By comparing the undrained shear strength distributions obtained by the static method and the quasi-static method with the undrained shear strength distributions obtained by the dynamic finite element method in the three typical sections, the superiority of the dynamic finite element method in predicting changes in undrained shear strength is demonstrated.  相似文献   

10.
This paper presents a predictive model for undrained penetration of cylinders into soft seafloor soils. The penetration depth will depend on the velocity of the cylinder as it touches down at the seafloor, and the net deceleration of the cylinder as it is acted on by forces of self-weight, soil buoyancy, and soil-shearing resistance. The soil-shearing resistance force increases as a function of penetration depth and, due to the dependence of undrained shear strength on strain rate, penetration velocity. This paper presents finite element (FE) simulations that quantify both effects and form the basis of a simplified soil-resisting force model. Strain-rate effects are modeled within a framework of rate-dependent plasticity, with shearing resistance increasing semilogarithmically with increasing strain rate above a certain threshold strain rate. With all forces acting on the cylinder, estimated penetration depths are predicted from simple equations of motion for a single particle. Comparisons to laboratory tests involving penetration of cylinders into soft reconstituted marine clay show reasonable agreement between model predictions and measurements.  相似文献   

11.
Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.  相似文献   

12.
Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.  相似文献   

13.
-In order to analyze the stability of pipelines on the sea bed, the friction characteristics at the pipe-soil interface were examined by means of special direct shear tests. High density polythene was used as the surface of the pipe, which is a widely-utilized material for the outer cover of the pipe to prevent sea water corrosion. Sands of different gradings were tested. The reconstituted soft clay taken from the Bohai area was consolidated to different degrees of consolidation by the vacuum preloading technique, and tested.  相似文献   

14.
Steel catenary risers (SCR) connect seabed pipelines and flow lines to floating structures used for oil and gas production in deep waters. Waves and currents induce motions of the structure and the risers. The repeated motions of the risers at the touchdown zone in turn induce loads on the seabed soil and might eventually cause fatigue damage to the risers. The analysis of riser fatigue damage is heavily dependent on the soil model. Soil behaviour at touchdown zone such as soil remoulding, stiffness degradation and deformation of the seabed at the touchdown zone further complicate the accurate assessment of riser fatigue damage, which is currently not appropriately quantified in existing design methods. This paper presents centrifuge model tests simulating the repeated vertical movement of a length of riser on clay seabed with increasing undrained shear strength with depth. During the tests, the pipe was subject to cyclic motion over fixed vertical displacement amplitude from an invert embedment of 0.5-3.5 pipe diameters into the soil. The test results show a significant progressive degradation of soil strength and diminution of excess pore water pressure with increasing number of riser penetration/uplift cycle. In view of the different types of environment loadings experienced by floating platforms and various soil conditions, tests were also conducted to investigate the effect of soil strength, riser displacement rate and loading mode on riser-soil interaction during repetitive penetration/uplift motion of the riser.  相似文献   

15.
With the increase in demand and supply gap in the oil and gas industry, new developments of oil and gasinfrastructure are moving into deeper water. This requires design and construction of long high temperature and high pressure pipelines from deep sea to shore. These pipelines are subjected to cyclic expansion during operating cycles. Accumulated axial movement due to repeated thermal cycles may lead to global displacement referred to as ‘walking’. Walking rates depend on the restraint associated with seabed friction. In conventional analyses, seabed friction is independent of the rate of thermal loading and expansion but it has been recognised that the sliding resistance between a pipe and the seabed varies with velocity, partly due to drainage effects. In this paper a numerical model is used to explore the effect of velocity-dependent seabed friction. A velocity-dependent friction model is implemented in commercial software ABAQUS and validated via single element and simple (flat seabed) pipeline cases. This model features upper and lower friction limits, with a transition that occurs as an exponential function of velocity. A parametric study is performed using differing rates of heating and cool-down in walking situations driven by seabed slope, SCR end tension and the difference between heat up and cool down rates. The walking behaviour is compared to cases with constant friction and solutions are proposed to express the velocity-dependent response in terms of an equivalent constant friction. These equivalent friction values can then be applied in existing simple solutions or more complex numerical analyses, as a short cut method to account for velocity-dependent friction.  相似文献   

16.
Natural Ariake clays are characterized by high sensitivity. In this study, the mechanism and the factors controlling undrained shear strengths of both undisturbed and remolded Ariake clays are discussed. A series of unconfined compressive tests were performed on undisturbed samples of natural Ariake clays. The remolded undrained shear strength is predicted using a quantitative expression derived from extensive data of remolded undrained shear strength for a number of soils compiled from resources in the literature. The sensitivity of natural Ariake clays derived from the ratio of half of unconfined compressive strength for undisturbed samples to remolded undrained shear strength is found to be affected by both natural water content and normalized water content that is defined as the ratio of natural water content to liquid limit. The smaller the natural water content, the higher the sensitivity is at the same normalized water content. At the same natural water content, the larger the normalized water content, the higher the sensitivity is.  相似文献   

17.
Stiffness degradation will occur due to the generation of accumulated pore pressure in saturated soft clays under cyclic loading. The soil static-dynamic multi-purpose triaxial and torsional shear apparatus in Dalian University of Technology was employed to perform different types of test on saturated soft marine clay in the Yangtze estuary. Undisturbed samples of the clay were subjected to undrained cyclic vertical and torsional coupling shear and cyclic torsional shear after three-directional anisotorpic consolidation with different initial consolidation parameters. Investigated were the effects of the initial orientation angle of the major principal stress, initial ratio of deviatoric stress, initial coefficient of intermediate principal stress and continuous rotation of principal stress axes on the stiffness degradation. It is found that the degradation index decreases (or degradation degree increases) significantly with increasing initial orientation angle of the major principal stress and initial ratio of deviatoric stress. Compared to the effects of the initial orientation angle of the major principal stress and initial ratio of deviatoric stress, the effect of initial coefficient of intermediate principal stress is less evident and this trend is more clearly reflected by the results of the cyclic torsional shear tests than those of the cyclic coupling shear tests. At the same cycle number, the degradation index obtained from the cyclic torsional shear test is higher than that from the cyclic coupling shear test. The main reason is that the continuous rotation in principal stress directions during cyclic coupling shear damages the original structure of the soil more than the cyclic torsional shear does. Based on a series of experiments, a mathematical model for stiffness degradation is proposed and the relevant parameters are determined.  相似文献   

18.
ABSTRACT

Natural Ariake clays are characterized by high sensitivity. In this study, the mechanism and the factors controlling undrained shear strengths of both undisturbed and remolded Ariake clays are discussed. A series of unconfined compressive tests were performed on undisturbed samples of natural Ariake clays. The remolded undrained shear strength is predicted using a quantitative expression derived from extensive data of remolded undrained shear strength for a number of soils compiled from resources in the literature. The sensitivity of natural Ariake clays derived from the ratio of half of unconfined compressive strength for undisturbed samples to remolded undrained shear strength is found to be affected by both natural water content and normalized water content that is defined as the ratio of natural water content to liquid limit. The smaller the natural water content, the higher the sensitivity is at the same normalized water content. At the same natural water content, the larger the normalized water content, the higher the sensitivity is.  相似文献   

19.
软粘土在波浪荷载作用下,可能发生强度软化,使埋设在软粘土层中的海底管道的受力状态或支撑条件发生变化,从而出现上浮或下沉的趋势,对管道的稳定性发生影响。本文通过在振动台上进行的模型试验来模拟当土性因动荷作用而发生变化时管道的稳定情况,对这个问题进行了探索,得出了一些规律性的认识,可供海底管道的设计者参考。  相似文献   

20.
This article presents a testing study on the strain-rate effects on the stress--strain behavior of natural, undisturbed Hong Kong marine deposits (HKMD) from three Hong Kong locations, including a one-dimensional (1-D) compressibility in a confined condition, and undrained shear strengths in triaxial compression and extension modes. The influences of the strain rates on the one-dimensional compressibility are studied by means of constant rate of strain (CRS) tests and multistage loading oedometer (MSL) tests, and those on the undrained shear strengths are studied by Ko-consolidated undrained compression and extension tests with step-changed axial strain rates (CKoUC and CKoUE tests), and with both step-changed axial strain rates and relaxation processes (CKoUCR and CKoUER tests). The strain-rate effects on the stress--strain behavior are generally examined by “apparent” preconsolidation pressures in the 1-D compressions and undrained shear strengths in the triaxial compression and extension stress states. The stress--strain behavior of the natural, undisturbed HKMD exhibits considerable viscous characteristics. In the CRS and MSL tests at a given strain, the higher the strain rate, the higher the effective stress, the higher the porewater pressure. In the undrained shearing tests, the higher the strain rate, the higher the undrained shear strength, but the lower the porewater pressure. For the CKoUC and CKoUE tests on the Tsing Yi site samples, the undrained shear strength increases by 8.5% and 12.1% for one order increment of axial strain rate of 0.2%/hr (i.e., ρ0.2) for the compression and extension modes respectively. For the CKoUCR and CKo tests on the Tung Chung site samples of different compositions, average ρ0.2 is increased by 6.2% for the compression and 9.5% for the extension, but by 18.8% for the extension on a higher plastic sample. The present study shows that the strain-rate effects on the stress--strain behavior of the undisturbed HKMD are larger for specimens in extension than those in compression.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号