排序方式： 共有22条查询结果，搜索用时 15 毫秒
1.
The influence of non-coaxial constitutive model on predictions of dense sand behavior is investigated in this paper. The non-coaxial model with strain softening plasticity is applied into finite-element program ABAQUS, which is first used to predict the stress-strain behavior and the non-coaxial characteristic between the orientations of the principal stress and principal plastic strain rate in simple shear tests. The model is also used to predict load settlement responses and bearing capacity factors of shallow foundations. A series of centrifuge tests for shallow foundations on saturated dense sand are performed under drained conditions and the test results are compared with the corresponding numerical results. Various footing dimensions, depths of embedment, and footing shapes are considered in these tests. In view of the load settlement relationships, the stiffness of the load-displacement curves is significantly affected by the non-coaxial model compared with those predicted by the coaxial model, and a lower value of non-coaxial modulus gives a softer response. Considering the soil behavior at failure, the coaxial model predictions of bearing capacity factors are more advanced than those of centrifuge test results and the non-coaxial model results;besides, the non-coaxial model gives better predictions. The non-coaxial model predictions are closer to those of the centrifuge results when a proper non-coaxial plastic modulus is chosen. 相似文献
2.
采用不排水条件下孔隙水压力发展模式,作为Terzagh i一维固结方程中考虑波浪循环作用所引起的孔隙水压力源项,对于成层海床建立了推广的一维动力固结方程,运用数理方程中的分离变量法与G reen函数求解了成层海床在波浪作用下残余孔隙水压力的发展规律,进而对成层海床的液化势进行了评判。对比计算与分析表明,海床表层土的渗透性及其厚度对于海床的整体抗液化性能具有显著的影响,低渗透性的表层导致海床孔隙水压力的显著积累,此时表层置换法是防治液化的有效途径。 相似文献
3.
针对取自于长江口的海洋原状饱和软黏土,利用土工静力-动力液压三轴-扭转多功能剪切仪,在控制不同初始固结参数的三向非均等固结状态和不排水条件下,分别进行了轴向和扭转双向耦合循环剪切以及循环扭剪等多种复杂循环剪切试验。分别研究了初始大主应力方向角、初始偏应力比、初始中主应力系数以及循环剪切应力模式等因素对门槛循环应力比的影响。试验结果表明,在三向非均等固结条件下,初始大主应力方向角、初始偏应力比对门槛循环应力比影响显著,门槛循环应力比随着初始大主应力方向角与初始偏应力比的增大而明显减小;而初始中主应力系数对门槛循环应力比基本没有影响。循环剪切应力模式对门槛循环应力比具有显著影响,在相同的初始固结应力条件下,循环耦合剪切试验确定的门槛循环应力比明显小于循环扭剪试验所确定的门槛循环应力比。 相似文献
4.
利用大连理工大学的“土工静力-动力液压-三轴扭转多功能剪切仪”,针对相对密实度为70％的福建标准砂,在不排水条件下控制试验过程中的中主应力系数保持不变,进行了不同初始固结应力条件下不同主应力方向的单调剪切试验.以此着重探讨了主应力方向及初始固结应力对饱和密砂单调剪切特性的影响,研究表明,主应力方向和初始固结应力对于密砂的有效应力路径和应力-应变关系均具有十分显著的影响.通过与饱和松砂不排水单调剪切特性的对比分析,探讨了初始相对密实度对砂土剪切特性的影响,研究表明随着主应力方向角增大,密砂的应变硬化效应逐渐减弱,但未出现松砂对应的应变软化现象. 相似文献
5.
6.
航船应急抛锚时锚板贯入土体可能会影响河床或海床中的结构物甚者造成破坏，因此在通航频繁的航道，结构物埋深的设计需要充分考虑应急抛锚时锚板的贯入深度。本文通过缩尺模型试验模拟了霍尔锚在中等密实度粉细砂中的抛锚贯入过程，研究了不同抛锚速度(1.15～4.4 m/s)及粉细砂相对密实度(0.45～0.65)对抛锚贯入深度的影响；基于太沙基极限承载力理论和能量守恒定律，推导出霍尔锚在粉细砂土中贯入深度的表达式，与模型试验结果对比显示理论计算结果偏于保守。基于试验结果提出修正系数，修正后的理论公式能够较好地快速预测霍尔锚在中等密实度粉细砂中的贯入深度。研究结果为粉细砂土河床或海床中的结构物埋深设计提供了一定的技术参考。 相似文献
7.
Study on Failure Mechanism and Bearing Capacity of Three-Dimensional Rectangular Footing Subjected to Combined Loading 总被引：2，自引：0，他引：2
This paper presents two kinematic failure mechanisms of threc-dimensional rectangular footing resting on homogeneous undrained clay foundation under uniaxial vertical loading and uniaxial moment loading. The failure mechanism under vertical loading comprises a plane strain Prandti-type mechanism over the central part of the longer side, and the size of the mechanism gradually reduces at the ends of the longer side and over the shorter side as the corner of rectangular footing is being approached where the direction of soil motion remains normal to each corresponding side respectively. The failure mechanism under moment loading comprises a plane strain scoop sliding mechanism over the central part of the longer side, and the radius of scoop sliding mechanism increases linearly at the ends of the longer side. On the basis of the kinematic failure mechanisms mentioned above, the vertical ultimate bearing capacity and the ultimate bearing capacity against moment or moment ultimate bearing capacity are obtained by use of upper bound limit analysis theory. At the same time, numerical analysis results, Skempton＇ s results and Salgado et al. ＇s results are compared with this upper bound solution. It shows that the presented failure mechanisms and plastic limit analysis predictions are validated. In order to investigate the behaviors of undrained clay foundation beneath the rectangular footing subjected to the combined loadings, numerical analysis is adopted by virtue of the general-purpose FEM software ABAQUS, where the clay is assumed to obey the Mohr-Coulomb yielding criterion. The failure envelope and the ultimate bearing capacity are achieved by the numerical analysis results with the varying aspect ratios from length L to breadth B of the rectangular footing. The failure mechanisms of rectangular footing which are subjected to the combined vertical loading V and horizontal loading H （Vertical loading V and moment loading M, and horizontal loading H and moment loading M respectively are observed in the finite e 相似文献
8.
针对海床在波浪荷载作用下的应力状态,利用大连理工大学的"土工静力-动力液压-三轴扭转多功能剪切仪",针对相对密实度为70%的福建标准砂进行了一系列应力控制式轴向一扭转双向耦合的不排水循环剪切试验试。通过分别控制轴向与扭转应力幅值,研究了椭圆形主应力轴旋转应力路径下两个剪切分量对饱和砂土的动强度及其剪切特性的影响。结合所得试验结论,说明了目前广泛用于动强度分析的循环剪应力表达式无法正确反映椭圆形主应力轴旋转应力路径下的动强度,并提出了一个新的动应力表达式用于分析复杂应力路径的动强度特性。 相似文献
9.
非共轴本构模型在地基承载力数值计算中若干影响因素的探讨 总被引：1，自引：0，他引：1
土体在剪切变形过程中产生主应力方向的旋转时,主应变增量方向与主应力方向之间存在着非共轴现象,然而传统的弹塑性本构模型未能考虑该现象的影响。通过在屈服面的切线方向增加一项非共轴塑性应变增量,即可实现对非共轴现象的反映。采用显式积分算法和自动分步方法,将非共轴本构模型运用到桶形基础地基承载力问题的有限元计算中,并讨论了流动法则、内摩擦角、膨胀角等因素与非共轴模型的联系。计算结果表明：采用有限元程序默认容许误差时,该本构模型可达到理想的收敛精度,并且,该模型对关联、非关联流动法则均适用。采用共轴模型进行数值计算时,不同流动法则对计算结果的影响可以忽略;采用非共轴模型时,不同流动法则的计算结果之间存在差异。非共轴现象对地基承载力-位移曲线具有软化作用,并且,该软化作用在采用非关联流动法则时变得更加明显 相似文献
10.
黄河三角洲粉土循环剪切特性的试验研究 总被引：1，自引：1，他引：0
利用土工静力-动力液压三轴-扭转多功能剪切仪,对黄河三角洲埕北海域原状粉土试样进行了循环三轴和循环扭剪试验,以此探讨了原状海底粉土的动力变形与强度特性,确定了最大动剪切模量及动力变形参数随剪应变的变化规律。基于循环三轴试验结果,建立了残余孔隙水压力发展变化规律的双曲线经验模式,对动强度关于循环次数的依赖性提出了经验关系,确定了有关试验参数及其关于固结应力比的依赖性。与循环三轴试验结果相对比,认为在土工抗震设计中采用循环三轴试验结果稍偏于保守。 相似文献