首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia.The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1–21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.  相似文献   

2.

From the early Late Permian onwards, the northeastern part of the Sydney Basin, New South Wales, (encompassing the Hunter Coalfield) developed as a foreland basin to the rising New England Orogen lying to the east and northeast. Structurally, Permian rocks in the Hunter Coalfield lie in the frontal part of a foreland fold‐thrust belt that propagated westwards from the adjacent New England Orogen. Thrust faults and folds are common in the inner part of the Sydney Basin. Small‐scale thrusts are restricted to individual stratigraphic units (with a major ‘upper decollement horizon’ occurring in the mechanically weak Mulbring Siltstone), but major thrusts are inferred to sole into a floor thrust at a poorly constrained depth of approximately 3 km. Folds appear to have formed mainly as hangingwall anticlines above these splaying thrust faults. Other folds formed as flat‐topped anticlines developed above ramps in that floor thrust, as intervening synclines ahead of such ramp anticlines, or as decollement folds. These contractional structures were overprinted by extensional faults developed during compressional deformation or afterwards during post‐thrusting relaxation and/or subsequent extension. The southern part of the Hunter Coalfield (and the Newcastle Coalfield to the east) occupies a structural recess in the western margin of the New England Orogen and its offshore continuation, the Currarong Orogen. Rocks in this recess underwent a two‐stage deformation history. West‐northwest‐trending stage one structures such as the southern part of the Hunter Thrust and the Hunter River Transverse Zone (a reactivated syndepositional transfer fault) developed in response to maximum regional compression from the east‐northeast. These were followed by stage two folds and thrusts oriented north‐south and developed from maximum compression oriented east‐west. The Hunter Thrust itself was folded by these later folds, and the Hunter River Transverse Zone underwent strike‐slip reactivation.  相似文献   

3.
鄂尔多斯盆地西缘北区横山堡地区是重要的油气接替区域。本文利用构造解析、地震勘探等技术方法,对研究区构造特征与油气勘探目标进行了研究。结果表明,晚侏罗纪末期,研究区为银川复背斜东翼,喜山期构造调整后转为前缘反冲带,由一系列西冲东倾逆冲断层与断背斜组成;该区可分为西部逆冲断褶带、中部逆冲断阶带和东部过渡构造带3个构造单元。断层可分为4级;以燕山期近南北—北北东向逆断层为主,其次为喜山期近东西向走滑断层,并错断了燕山期逆断层。构造样式为一系列东倾单向叠瓦状冲断组合,由近南北向逆断层及加持于其中的断块组成,断块往往为一些小型断背斜,其轴迹走向以近南北—北北东向为主。地质结构为深层滑脱型单向东倾冲断构造。根据上述研究,在沙亥庙断裂上盘断背斜构造高部位优选出一个钻探目标。  相似文献   

4.
Antithetic fault linkages in a deep water fold and thrust belt   总被引：4，自引：0，他引：4  
Deep water fold and thrust belts consist of both forethrusts and backthrusts that can link along strike to form continuous folds in the overburden. The interaction of faults of opposing dip are termed ‘antithetic thrust fault linkages’ and share the common feature of a switch in vergence of overlying hangingwall anticlines. Using three-dimensional seismic data, on the toe-of-slope of the Niger Delta, linkages are classified into three distinct structural styles. This preliminary classification is based on the vertical extent of faulting within a transfer zones relative to the branch line of the antithetic faults. The stratigraphic level of the lateral tip of the fault, the shape of lateral tip region of a fault plane and the stratal deformation within the transfer zones is also distinctive in each type of fault linkage. A Type 1 linkage comprises faults that overlap exclusively above the level of the branch line. A ‘pop-up’ structure forms within the transfer zone with sediments below remaining planar. The lower tip lines of faults climb stratigraphically towards the linkage zone creating asymmetric, upward-tapering lateral tip regions. In Type 2 linkages fault overlap occurs lower than the level of the branch line such that lateral fault tips are located within the footwall of the counterpart fault. Faulting is thus limited to the deeper section within the transfer zone and creates unfaulted, symmetric, bell-shaped folds in the overburden. Upper tip lines of faults lose elevation within the transfer zone creating asymmetric, downwards-tapering lateral tip regions. In Type 3 linkages both faults continue above and below the branch line within the transfer zone resulting in cross-cutting fault relationships. Horizon continuity across the folds, through the transfer zones, varies significantly with depth and with the type of fault intersection.  相似文献   

5.
High-quality three-dimensional (3D) seismic reflection and borehole data from the Egersund Basin, offshore Norway are used to characterise the structural style and determine the timing of growth of inversion-related anticlines adjacent to a segmented normal fault system. Two thick-skinned normal faults, which offset Permian clastics and evaporites, delineate the north-eastern margin of the basin. These faults strike NNW-SSE, have up to 1900 m of displacement and are separated by an ESE-dipping, c. 10 km wide relay ramp. Both of these faults display exclusively normal separation at all structural levels and tip out upwards into the upper part of the Lower Cretaceous succession. At relatively shallow structural levels in the hangingwalls of these faults, a series of open, low-amplitude, fault-parallel anticlines are developed. These anticlines, which are asymmetric and verge towards the footwalls of the adjacent faults, are interpreted to have formed in response to mild inversion of the Egersund Basin. The amplitude of and apparent shortening associated with the anticlines vary along strike, and these variations mimic the along-strike variations in throw observed on the adjacent fault segments. We suggest that this relationship can be explained by along-strike changes in the propensity of the normal faults to reactivate during shortening; wider damage zones and lower angles of internal friction, coupled with higher pore fluids pressures at the fault centre, mean that reactivation is easier at this location than at the fault tips or in the undeformed country rock. Seismic-stratigraphic analysis of growth strata indicate that the folds initiated in the latest Turonian-to-earliest Coniacian (c. 88.6 Ma) and Santonian (c. 82.6 Ma); the control on this c. 6 Myr diachroneity in the initiation of fold growth is not clear, but it may be related to strain partitioning during the early stages of shortening. Anticline growth ceased in the Maastrichtian and the inversion event is therefore interpreted to have lasted at least c. 20 Myr. This study indicates that 3D seismic reflection data is a key tool to investigate the role that normal fault segmentation can play in controlling the structural style and timing of inversion in sedimentary basins. Furthermore, our results highlight the impact that this structural style variability may have on the development of structural and stratigraphic hydrocarbon traps in weakly-inverted rifts.  相似文献   

6.
藏北羌塘盆地褶皱形变研究   总被引：9，自引：5，他引：4       下载免费PDF全文
羌塘盆地由于受多期构造活动的影响形成多个构造层,不同构造层的变形特征存在明显差异。其中三叠纪构造层多形成一些紧闭倒转的小型背、向斜褶皱,侏罗纪构造层内多发育大型宽缓的背、向斜及复背斜、复向斜,而白垩纪—新近纪构造层多位于向斜核部和背斜翼部,形成宽缓的褶曲。褶皱变形以近东西向为主,从老到新不同构造层形成的褶皱由紧闭到宽缓,存在一定的继承性和递进叠加的特点。褶皱轴迹的空间展布及变形特点表明不同时期板块的拼合挤压是导致盆地变形的主要驱动力,基底断裂及基底凸凹变化对褶皱的展布和变形有一定程度的控制和影响。  相似文献   

7.
When a mechanically layered section of rock is subject to a horizontal strain, faults often nucleate preferentially in one or more layers before propagating through the rest of the section. The result is a high density of small, low-throw faults within these layers, and a much smaller number of large, through-cutting faults which nevertheless accommodate most of the strain due to their much larger displacement. A dynamic model of fault nucleation and propagation has been created by combining analytical and finite element techniques to calculate the energy balance of these propagating faults. This model shows that: 1) faults may nucleate in either mechanically weak layers, or in stiff layers with a high differential stress; 2) fault propagation may be halted either by strong layers (in which the sliding friction coefficient is high), or by layers which deform by flow and thus have low differential stress. This model can predict quantitatively the horizontal strain required for faults to nucleate, and to propagate across mechanical layer boundaries. The model is able to explain the complex pattern of fault nucleation and propagation observed in a mechanically layered outcrop in Sinai, Egypt.  相似文献   

8.
印度与欧亚板块碰撞以来东喜马拉雅构造结的演化   总被引：14，自引：0，他引：14  
丁林  钟大赉 《地质科学》2013,48(2):317-333
在野外填图,构造观察及前人研究的基础上,本文识别并描述了东喜马拉雅构造结中的推覆断裂、正断裂及走滑断裂、背斜(形)和向斜(形)等构造类型,讨论了这些构造位置及与印度板块挤入,印支地块旋转的关系,还探讨了东喜马拉雅构造结对印度板块持续向北推挤下的特殊应变调节方式。在印度大陆部分,东喜马拉雅构造结由3个向外逐渐变新的构造结组成,即北东向的南迦巴瓦峰复式背斜、北西向的桑复式向斜及北东向的阿萨母复式向斜。上述3个构造结是协调印度板块的挤入、喜马拉雅弧的扩展及印支地块的旋转的构造。在欧亚大陆内部的冈底斯岛弧,在派区及阿尼桥走滑断裂协调下,高喜马拉雅结晶岩的基底挤入冈底斯岛弧内部,在大拐弯顶端形成向上的挤出构造。在南迦巴瓦峰构造结的北西侧,由于掀斜式抬升及重力滑动,使得冈底斯盖层与结晶基底脱耦,上盘盖层沿东久向北西方向滑动。在南迦巴瓦峰构造结北东侧,由于印支地块的挤出和旋转,形成一系列的北西向走滑断裂,如实皆断裂、嘉黎-高黎贡断裂、澜沧江断裂及红河断裂等。  相似文献   

9.
TheAssamArakan fold thrust belt has highly deformed folded units of Tertiary sediments bounded by eastward dipping thrust slices with a convexity towards west. In the Tripura-Cachar region, this folded belt is characterized by the occurrence of wide synclines and narrow anticlines that hosts a number of hydrocarbon producing fields. In the Cachar area of Assam, most of these fields occur in the culmination of anticlinal structures. Other wells drilled in analogous structural settings are found to be dry. In this paper a neotectonic based geomorphic analysis is carried out to delineate a fault network and geomorphic highs in Cachar area as expressions of sub-surface structures which had subsequently been validated by available geophysical data. Of these geomorphic highs, those that are in the synclinal areas are believed to represent subtle sub-surface structural highs. Synclinal structures associated with NNE-SSW faults might be considered interesting for hydrocarbon exploration and are subsequently categorized following their degree of confidence for exploration of hydrocarbon. Additionally, a genetic model of the structures in the region is also proposed.  相似文献   

10.
川东南地区构造变形复杂,二叠系和志留系含有丰富的页岩气资源。依据岩性和地震资料的解释,寒武系膏盐层与中-下三叠统膏盐层对构造变形有重要控制作用,多数断层沿膏盐层滑脱。研究区包括盆内和盆缘两部分,盆内发育形态对称的盖层滑脱式褶皱;盆缘发育基底卷入式褶皱冲断构造,分为山前推覆带和山前转换带,前者发育高陡的三角楔构造,后者由冲断带、褶皱带和斜坡带组成。构造演化分析表明:晚侏罗世齐岳山断层开始发育,盆内地层发生挠曲变形;白垩纪盆缘形成三角楔构造,盆内主要构造和断裂已经发育;新生代齐岳山褶皱隆升,盆内寒武系之上沉积盖层褶皱形成多个背斜和向斜。山前推覆带构造高陡、变形强烈,页岩气保存条件差;山前转换带构造变形程度适中,其褶皱带背斜完整,页岩气保存条件好;盆内中-下三叠统膏盐层封盖性好,埋深适中的背斜为页岩气有利勘探目标区。   相似文献   

11.
利用2001年度西林—潞城地区26条MT测线924个测点资料,建立了岩石电性特征表,构筑了合理的地电模型,对南盘江坳陷右江断凹区,包括隆林凸起、右江断凹及乐业断阶中的凌云凸起等构造单元的主要构造层位和断裂进行了追踪判别,揭示了三叠系底、石炭系—二叠系底和泥盆系底三个主要地质界面的高程形态,给出了主要断裂和向斜的构造资料。研究结果显示,利用大地电磁测深资料进行区域及局部构造分析是行之有效的。对构造单元具有划界作用的一级断裂共计11条,均为逆断层,大部分NW—NWW向,多数延伸达10～100km,南倾,倾角50°～60°,浅部较陡,深部较缓,具同沉积断裂性质。主要向斜包括小河口、八桂、央边及西平等四个,全落在右江断凹,构造幅度在三叠系底面上为850～1400m,石炭系—二叠系底为1000～1750m,泥盆系底为1500～2500m。区内还分布有十多个出露或隐伏的背斜和凸起构造,全区尤其是右江断凹,构造形态比较复杂。  相似文献   

12.
This paper uses high-resolution images and field investigations, in conjunction with seismic reflection data, to constrain active structural deformation in the Kashan region of Central Iran. Offset stream beds and Qanats indicate right-lateral strike slip motion at a rate of about 2 mm/yr along the NW–SE trending Qom-Zefreh fault zone which has long been recognized as one of the major faults in Central Iran. However, the pattern of drainage systems across the active growing folds including deep incision of stream beds and deflected streams indicate uplift at depth on thrust faults dipping SW beneath the anticlines. Therefore, our studies in the Kashan region indicate that deformation occurs within Central Iran which is often considered to behave as a non-deforming block within the Arabia–Eurasia collision zone. The fact that the active Qom-Zefreh strike-slip fault runs parallel to the active folds, which overlie blind thrust faults, suggests that oblique motion of Arabia with respect to Eurasia is partitioned in this part of Central Iran.  相似文献   

13.
The geometry and architecture of a well exposed syn-rift normal fault array in the Suez rift is examined. At pre-rift level, the Nukhul fault consists of a single zone of intense deformation up to 10 m wide, with a significant monocline in the hanging wall and much more limited folding in the footwall. At syn-rift level, the fault zone is characterised by a single discrete fault zone less than 2 m wide, with damage zone faults up to approximately 200 m into the hanging wall, and with no significant monocline developed. The evolution of the fault from a buried structure with associated fault-propagation folding, to a surface-breaking structure with associated surface faulting, has led to enhanced bedding-parallel slip at lower levels that is absent at higher levels. Strain is enhanced at breached relay ramps and bends inherited from pre-existing structures that were reactivated during rifting. Damage zone faults observed within the pre-rift show ramp-flat geometries associated with contrast in competency of the layers cut and commonly contain zones of scaly shale or clay smear. Damage zone faults within the syn-rift are commonly very straight, and may be discrete fault planes with no visible fault rock at the scale of observation, or contain relatively thin and simple zones of scaly shale or gouge. The geometric and architectural evolution of the fault array is interpreted to be the result of (i) the evolution from distributed trishear deformation during upward propagation of buried fault tips to surface faulting after faults breach the surface; (ii) differences in deformation response between lithified pre-rift units that display high competence contrasts during deformation, and unlithified syn-rift units that display low competence contrasts during deformation, and; (iii) the history of segmentation, growth and linkage of the faults that make up the fault array. This has important implications for fluid flow in fault zones.  相似文献   

14.
The geometry and evolution of vertically segmented normal faults, with dip separations of < ca 11.5 m have been studied in a coastal outcrop of finely bedded Cretaceous chalk at Flamborough Head, U.K. Fault trace segments are separated by both contractional and extensional offsets which have step, overlap or bend geometries. The location of fault trace offsets is strongly controlled by lithology occurring at either thin (ca 1 mm-8 cm) and mechanically weak marl layers or partings between chalk units. Fault segmentation occurred during either fault nucleation within, or propagation through, the strongly anisotropic lithological sequence. An inverse relationship between fault displacement and number of offsets per length of fault trace reflects the progressive destruction of offsets during fault growth. The preservation of fault offsets is therefore dependent on offset width and fault displacement. Fault rock, comprising gouge and chalk breccia, may vary in thickness by 1.5–2.0 orders of magnitude on individual fault traces. Strongly heterogeneous fault rock distributions are most common on small faults (< 10 cm displacement) and are produced mainly by destruction of fault offsets. Shearing of fault rock with increasing displacement gives rise to a more homogeneous fault rock distribution on large faults at the outcrop scale.  相似文献   

15.
《Geodinamica Acta》2013,26(3):145-167
Folds constitute a significant part within the dominantly extension-related deformation pattern of the Gediz Graben and their origin either extensional or contractional has been the subject of debate. Field and subsurface data presented in this paper suggest that folds of contractional and extensional origin coexist in the graben-fill sediments. Contractional folds are predominantly observed within the Alasehir formation. A north vergent, plunging, asymmetrical to overturned geometry characterizes these folds and they are commonly observed in association with south dipping both thrust and reverse faults; the presence of thrust/reverse faults in the Gediz Graben is documented for the first time here. Fault data suggest an approximately N–S direction of compression that has governed the contractional deformation. Yet the limited distribution of these structures prevents to relate them with confidence to a regional deformation phase.

Extensional folds occur in association with normal faults either as structures longitudinal or transverse with respect to the general graben trend. Transverse folds are a very common within the buried graben block, owing to the lateral displacement gradients (lateral difference in offset) on the individual fault segments along the southern margin of the graben. Synclines and anticlines have formed at displacement maxima and minima, respectively. Thickness of strata increases at synclines and decreases at anticlines, thus indicating the syn-depositional origin of the folding.  相似文献   

16.
燕山辽西地区的盖层可分两个构造层,由燕辽复向斜和秦皇岛背形相互叠加,并相应发育两期推覆构造。复向斜范围包括内蒙地轴和燕山沉降带,是由长条形的三个背斜和二个向斜相间,及配套的EW向纵断裂、SN向横断裂和NE向、NW向的共轭断裂组成。著名的尚义-宽城-凌源-朝阳-北票断裂是复向斜及其次级背斜的轴部纵断裂,以南大岭组、窑坡组和北票组作为其裂隙充填物。燕山EW向断裂南北对冲现象是复向斜纵断裂放射状排列并向核部推覆的反映。复向斜的形成机制完全符合纵弯褶皱作用下岩石的变形原理,是西伯利亚板块和华北板块碰撞的结果;秦皇岛背形的形成是后期太平洋板块俯冲在欧亚板块之下所致。  相似文献   

17.
Kinematic evolution of fold-thrust structures has been investigated by analogue models that include syntectonic sedimentation. Different decollement dips and basement thicknesses produced different wedge geometries and propagating characteristics. A model with one decollement level was characterized by a closely spaced thrust system during early stages of shortening as compared to the late stages. The frequency of fault nucleation was rapid during the early stages of deformation. Conversely, the frequency of fault nucleation was low and thrust spacing was significantly wider in a model with two decollement levels. Individual faults became locked at steep dips and deformation stepped forward as a new fault nucleated in-sequence in front of the older locked structure. Once the thrust system was established up to 27 % overall shortening, an overlying bed was introduced to simulate syntectonic deformation. Model sand wedge did not grow self similarly but rather its length and height increased episodically with deformation. Restoration of deformed models show that layer parallel shortening accommodated for approximately half of the total model shortening across the multilayers. Calculated error in apparent layer shortening from the restored layers revealed a direct relation with depth of the layers in the models. The experimental results are comparable to a natural example from the Northern Apennines fold-and-thrust belts.  相似文献   

18.
Altyn Tagh fault controls the deformation characteristics of the northern margin of the Qinghai-Tibet Plateau.The sinistral slip rate of the eastern segment of the fault reduces gradually where the reduction transforms into the deformation within Qilian Mountain,forming a series of thrust faults and strike-slip faults.Among them,the Yema River-Daxue Mountain fault is one of the important structural transform faults in the study area.Based on the differences of the geometrical characteristics and activities,the fault is divided into four segments,the Yema River segment,the Shibandun segment,the Liushapo segment and the Baishitougou segment,among which the former three are Holocene active faults,and the Baishitougou segment belongs to late Pleistocene fault.The excavated trenches imply a total of 6 paleoearthquake events,and at least 4 events have occurred during Holocene,whose occurrence times are 8300±700 yr BP,6605±140 yr BP,4540±350 yr BP,2098±47 yr BP,respectively.The recurrence interval is 2600±600 yr BP that is close to the lapsed time of the last one,2098±47 yr BP,which suggests that the Yema River-Daxue Mountain fault is in a high risk of major earthquakes in the future.The vertical coseismic displacements of the four Holocene paleoearthquake events are 100 cm,42 cm,40 cm and 50 cm,respectively,the horizontal coseismic displacements are 5 m,4.5-5.5 m,5-8 m and 4-5.5 m,separately,and then the reference magnitude of the paleoearthquake events is conjectured to be M7.6±0.1.  相似文献   

19.
Analysis of the Gachsar structural sub-zone has been carried out to constrain structural evolution of the central Alborz range situated in the central Alpine Himalayan orogenic system. The sub-zone bounded by the northward-dipping Kandovan Fault to the north and the southward-dipping Taleghan Fault to the south is transversely cut by several sinistral faults. The Kandovan Fault that controls development of the Eocene rocks in its footwall from the Paleozoic–Mesozoic units in the fault hanging wall is interpreted as an inverted basin-bounding fault. Structural evidences include the presence of a thin-skinned imbricate thrust system propagated from a detachment zone that acts as a footwall shortcut thrust, development of large synclines in the fault footwall as well as back thrusts and pop-up structures on the fault hanging wall. Kinematics of the inverted Kandovan Fault and its accompanying structures constrain the N–S shortening direction proposed for the Alborz range until Late Miocene. The transverse sinistral faults that are in acute angle of 15° to a major magnetic lineament, which represents a basement fault, are interpreted to develop as synthetic Riedel shears on the cover sequences during reactivation of the basement fault. This overprinting of the transverse faults on the earlier inverted extensional fault occurs since the Late Miocene when the south Caspian basin block attained a SSW movement relative to the central Iran. Therefore, recent deformation in the range is a result of the basement transverse-fault reactivation.  相似文献   

20.
The Kuqa fold-and-thrust belt exhibits apparent structural variation in the western and eastern zone. Two salt layer act as effective decollements and influence the varied deformation. In this study, detailed seismic interpretations and analog modeling are presented to construct the suprasalt and subsalt structures in the transfer zone of the middle Kuqa and investigate the influence of the two salt layers. The results reveal that the relationship of the two salt layers changes from separated to connected, and then overlapped toward the foreland in the transfer zone. Different structural models are formed in the suprasalt and subsalt units due to the interaction of the two salt layers. The imbricate thrust faults form two broom-like fault systems in the subsalt units. The suprasalt units develop detached folds terminating toward the east in the region near the orogenic belt. Whereas, two offset anticlines with different trends develop at the frontal edge of the lower salt layer and the trailing edge of the upper salt layer, respectively. According to exploration results in this region, the relationship between suprasalt and subsalt structures has an influence on hydrocarbon accumulation. We believe that the connected deformation contains high-risk plays while the decoupled deformation contains well-preserved plays.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号