首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 875 毫秒
1.
Field investigation of the western part of the Mosha Fault in several structural sections in the south central Alborz Range showed that the fault has a high angle of dip to the north, and emplaces Precambrian to Cenozoic rocks over the Eocene Karaj Formation. Study of the kinematics of the Mosha Fault in this area, based on S–C fabric and microstructures, demonstrates that it is a deep-seated semi-ductile thrust. Strain analysis on rock samples from different sections across the Mosha Fault shows a flattening pattern of deformation in which the long axis of the strain ellipsoid is aligned in the fault shear sense. The Mosha Fault is associated with a large hanging-wall anticline, cored by Precambrian rocks, and series of footwall synclines, formed of late Tertiary rocks. This geometry, together with several low angle short-cut thrusts in the fault footwall, implies that the Mosha Fault is an inverted normal fault which has been reactivated since the late Tertiary. In the study area, the reverse fault mechanism was associated with the rapid uplift and igneous activity in the central Alborz Range during the late Tertiary, unlike in the eastern portion of the fault, where the fault kinematics was replaced by a strike-slip mechanism in the Late Miocene.  相似文献   

2.
This paper presents a review of the Quaternary–Recent deformation field and mountain building processes within the Gobi Corridor region of Central Asia, which includes the North Tibetan foreland, Beishan, Gobi Altai and easternmost Tien Shan. The region can be considered the ‘soft core’ of Central Asia which has been reactivated due to the continuing Indo-Eurasia collision to the south. Favourable preconditions for reactivation of Gobi Corridor basement include a mechanically weak Palaeozoic terrane collage sandwiched between rigid Precambrian basement blocks to the north and south, thermally weakened crust due to Jurassic–Miocene volcanism and widespread Palaeozoic–Mesozoic granitic magmatism with associated high radiogenic heat production, and crustal thinning due to widespread Cretaceous rift basin development. The network of Quaternary–Recent faults within the entire region defines a diffuse sinistral transpressional deformation field that has generated a transpressional basin and range physiographic province. Typically, thrust and oblique-slip thrust faults are WNW-striking and reactivate basement faults and fabrics, whereas left-lateral strike-slip faults are ENE-striking and cut across basement trends. The angular relationship between SHmax and pre-existing basement structural trends is the fundamental control on the kinematics of Late Cenozoic deformation. Along-strike and across-strike growth and coalescence of restraining bends, other transpressional ranges and thrust ridges is an important mountain building process. Thrust faults throughout the region are both NNE and SSW directed and thus there is no common structural vergence, nor orogenic foreland or hinterland. Root structures appear to be vertical faults, not low-angle decollements and flower structure fault geometries within individual ranges are common. Published earthquake and geodetic data are consistent with a diffusely deforming continental interior region with tectonic loading shared amongst a complex network of faults. Therefore, earthquake prediction is likely to be more complex than in plate boundary settings and extrapolation of derived Late Quaternary fault slip rates is not straightforward. Modern mountain building within the Gobi Corridor demonstrates that reactivation of ancient accretionary and collisional orogens within continental interiors can play an important role in continental evolution and the life cycle of orogenic belts.  相似文献   

3.
A system of left-lateral faults that separates the South American and Scotia plates, known as the Magallanes-Fagnano fault system, defines the modern tectonic setting of the southernmost Andes and is superimposed on the Late Cretaceous – Paleogene Patagonian fold-thrust belt. Fault kinematic data and crosscutting relationships from populations of thrust, strike-slip and normal faults from Peninsula Brunswick adjacent to the Magallanes-Fagnano fault system, presented herein, show kinematic and temporal relationships between thrust faults and sets of younger strike-slip and normal faults. Thrust fault kinematics are homogeneous in the study area and record subhorizontal northeast-directed shortening. Strike-slip faults record east—northeast-directed horizontal shortening, west—northwest-directed horizontal extension and form Riedel and P-shear geometries compatible with left-lateral slip on the main splay of the Magallanes-Fagnano fault system. Normal faults record north-south trending extension that is compatible with the strike-slip faults. The study area occurs in a releasing step-over between overlapping segments of the Magallanes-Fagnano fault system, which localized on antecedent sutures between basement terranes with differing geological origin. Results are consistent with regional tectonic models that suggest sinistral shearing and transtension in the southernmost Andes was contemporaneous with the onset of seafloor spreading in the Western Scotia Sea during the Early Miocene.  相似文献   

4.
Deformational, metamorphic, monazite age and fabric data from Rengali Province, eastern India converge towards a multi-scale transpressional deformational episode at ca. 498–521 Ma which is linked with the latest phase of tectonic processes operative at proto-India-Antarctica join. Detailed sector wise study on mutual overprinting relationships of macro-to microstructural elements suggest that deformation was regionally partitioned into fold-thrust dominated shortening zones alternating with zones of dominant transcurrent deformation bounded between the thrust sense Barkot Shear Zone in the north and the dextral Kerajang Fault Zone in the south. The strain partitioned zones are further restricted between two regional transverse shear zones, the sinistral Riamol Shear Zone in the west and the dextral Akul Fault Zone in the east which are interpreted as synthetic R and antithetic R' Riedel shear plane, respectively. The overall structural disposition has been interpreted as a positive flower structure bounded between the longitudinal and transverse faults with vertical extrusion and symmetric juxtaposition of mid-crustal amphibolite grade basement gneisses over low-grade upper crustal rocks emanating from the central axis of the transpressional belt.  相似文献   

5.
Analysis of a suite of 2-D seismic reflection profiles reveals that the northwestern Sacramento Valley and eastern Coast Range foothills, northern California, are underlain by a system of blind, west-dipping thrust faults. Homoclinally east-dipping and folded Mesozoic marine forearc strata exposed along the western valley margin define the forelimbs of northeast-vergent fault-propagation folds developed in the hanging walls of the thrusts. Exhumed coherent blueschists of the accretionary complex and attenuated remnants of the ophiolitic forearc basement presently exposed in the eastern Coast Ranges are in the hanging wall of the blind thrust system, and have been displaced from their roots in the footwall. Deep, east-dipping magnetic reflectors in the footwall of the thrust system may be fragments of sheared, serpentinized and attenuated ophiolitic basement. Restoration of slip on the thrusts suggests that the Coast Range fault, which is the exposed structural contact between the coherent blueschists and attenuated ophiolite, originally dipped east and is associated with the east-dipping magnetic reflectors in the footwall. This interpretation of the reflection data is consistent with previous inferences about the deep structure in this region, and supports a two-stage model for blueschist exposure in the eastern Coast Ranges: (1) blueschist exhumation relative to the forearc basin by attenuation of the ophiolitic basement along the east-dipping Coast Range fault system in late Cretaceous; (2) blueschists, attenuated ophiolite, and forearc strata all were subsequently uplifted and folded in the hanging wall of the blind thrust system beginning in latest Cretaceous–early Tertiary. The blind thrust system probably rooted in, and was antithetic to, the east-dipping subduction zone beneath the forearc region. Active transpressional plate motion in western California is locally accommodated, in part, by reactivation of blind thrust faults that originally developed during the convergent regime.  相似文献   

6.
The evolution of the Main Cordillera of Central Chile is characterized by the formation and subsequent inversion of an intra-arc volcano-tectonic basin. The world’s largest porphyry Cu-Mo deposits were emplaced during basin inversion. Statistically, the area is dominated by NE- and NW-striking faults, oblique to the N-striking inverted basin-margin faults and to the axis of Cenozoic magmatism. This structural pattern is interpreted to reflect the architecture of the pre-Andean basement. Stratigraphic correlations, syn-extensional deposits and kinematic criteria on fault surfaces show several arc-oblique structures were active as normal faults at different stages of basin evolution. The geometry of syn-tectonic hydrothermal mineral fibers, in turn, demonstrates that most of these structures were reactivated as strike-slip ± reverse faults during the middle Miocene – early Pliocene. Fault reactivation age is constrained by 40Ar/39Ar dating of hydrothermal minerals deposited during fault slip. The abundance and distribution of these minerals indicates fault-controlled hydrothermal fluid flow was widespread during basin inversion. Fault reactivation occurred under a transpressive regime with E- to ENE-directed shortening, and was concentrated around major plutons and hydrothermal centers. At the margins of the former intra-arc basin, deformation was largely accommodated by reverse faulting, whereas in its central part strike-slip faulting was predominant.  相似文献   

7.
The major structure accommodating orogen-parallel extension in the Eastern Alps is inferred to be the Brenner Fault, which forms the western boundary of the Tauern Window. The estimated amount of extension along this fault varies from a minimum of 10–20 km to a maximum of >70 km. All investigations that have attempted to constrain this amount of extension have calculated the fault plane parallel displacement required to restore the difference in structural level between footwall and hanging wall as constrained by geobarometry. However, these calculations neglected the component of exhumation of the footwall resulting from folding and erosion. Therefore, the total amount of extensional displacement was systematically overestimated. In the present study, we project a tectonic marker surface from the footwall and hanging wall of the Brenner Fault onto a N–S-striking cross section. This marker surface, which is the base of the Patscherkofel unit in the footwall and the base of the Ötztal basement in the hanging wall, is inferred to have occupied the same structural level in the hanging wall and footwall of the Brenner Fault before its activity. Therefore, the difference in height between the marker projected from the footwall and from the hanging wall is a measure of the vertical offset across the Brenner Fault. This construction shows that the vertical offset of the marker horizon on both sides of the Brenner Fault varies strongly and continuously along strike of the Brenner Fault, attaining a maximum value of 15 km at the hinge of the folded footwall (Tauern Dome). The along-strike change of vertical offset is explained by large-scale upright folding of the footwall that did not affect the hanging wall of the Brenner Fault. Therefore, the difference in vertical offset of 10 km between the area of the Brenner Pass and the area immediately south of Innsbruck corresponds to the shortening (upright folding) component of exhumation of the footwall. The remaining 5 km of vertical offset must be attributed to extensional deformation. The Brenner Fault itself is barely folded, its dip varies between 20 and 70°, and it crosscuts the upright folds of the western Tauern Window. Given the offset of 5 km, the dip of the fault constrains the extensional displacement to be between 2 and 14 km. We conclude that the Tauern Window was exhumed primarily by folding and erosion, not by extensional unroofing.  相似文献   

8.
吐哈盆地中央构造带正反转演化特征   总被引：5，自引：3，他引：5  
吐哈盆地中央构造带由火焰山构造和七克台构造组成。中央构造带形成于三叠纪晚期至侏罗纪早期,表现为伸展构造特征,生长断层上盘地层厚度明显大于下盘,并于断层上盘所在的台北凹陷形成沉降中心。晚侏罗世,由于拉萨陆块与欧亚大陆的碰撞作用导致吐哈盆地由伸展盆地转变为挤压盆地,中央构造带也于此时发生构造反转,由早期的伸展正断层转变为挤压逆断层。发生于55Ma的喜山构造事件对天山地区产生了深刻的影响,但影响时间略有滞后,大致发生在晚渐新世至早中新世,中央构造带即在此次构造事件中强烈变形,逆冲出露于地表。  相似文献   

9.
The Asturian Arc was produced in the Early Permian by a large E–W dextral strike–slip fault (North Iberian Megashear) which affected the Cantabrian and Palentian zones of the northeastern Iberian Massif. These two zones had previously been juxtaposed by an earlier Kasimovian NW–SE sinistral strike–slip fault (Covadonga Fault). The occurrence of multiple successive vertical fault sets in this area favoured its rotation around a vertical axis (mille-feuille effect). Along with other parallel faults, the Covadonga Fault became the western margin of a proto-Tethys marine basin, which was filled with turbidities and shallow coal-basin successions of Kasimovian and Gzhelian ages. The Covadonga Fault also displaced the West Asturian Leonese Zone to the northwest, dragging along part of the Cantabrian Zone (the Picos de Europa Unit) and emplacing a largely pelitic succession (Palentian Zone) in what would become the Asturian Arc core. The Picos de Europa Unit was later thrust over the Palentian Zone during clockwise rotation. In late Gzhelian time, two large E–W dextral strike–slip faults developed along the North Iberian Margin (North Iberian Megashear) and south of the Pyrenean Axial Zone (South Pyrenean Fault). The block south of the North Iberian Megashear and the South Pyrenean Fault was bent into a concave, E-facing shape prior to the Late Permian until both arms of the formerly NW–SE-trending Palaeozoic orogen became oriented E–W (in present-day coordinates). Arc rotation caused detachment in the upper crust of the Cantabrian Zone, and the basement Covadonga Fault was later resurrected along the original fault line as a clonic fault (the Ventaniella Fault) after the Arc was completed. Various oblique extensional NW–SE lineaments opened along the North Iberian Megashear due to dextral fault activity, during which numerous granitic bodies intruded and were later bent during arc formation. Palaeomagnetic data indicate that remagnetization episodes might be associated with thermal fluid circulation during faulting. Finally, it is concluded that the two types of late Palaeozoic–Early Permian orogenic evolution existed in the northeastern tip of the Iberian Massif: the first was a shear-and-thrust-dominated tectonic episode from the Late Devonian to the late Moscovian (Variscan Orogeny); it was followed by a fault-dominated, rotational tectonic episode from the early Kasimovian to the Middle Permian (Alleghenian Orogeny). The Alleghenian deformation was active throughout a broad E–W-directed shear zone between the North Iberian Megashear and the South Pyrenean Fault, which created the basement of the Pyrenean and Alpine belts. The southern European area may then be considered as having been built by dispersal of blocks previously separated by NW–SE sinistral megashears and faults of early Stephanian (Kasimovian) age, later cut by E–W Early Permian megashears, faults, and associated pull-apart basins.  相似文献   

10.
Tehran lies on the southern flank of the Central Alborz, an active mountain belt characterized by many historical earthquakes, some of which have affected Tehran itself. The border between the Alborz Mountain and the Tehran’s piedmont (northern part of Tehran City) is marked by the North Tehran Fault (NTF), dividing the Eocene rock formation from the alluvial units of different ages (Early Pleistocene to the recent alluvium). A detail mapping of the piedmont, combined with structural study reveal that two active thrust faults (situated south of the NTF) are of importance for hazard assessment of the City. The geomorphological evidences along the NTF are not in agreement with an active fault, indicating that the fault activity may have been shifted southward. Furthermore differentiation of newly recognized alluvial units and their inferred ages, together with the mapped fault pattern permit us to characterize the Quaternary deformation. The Late Pleistocene alluvial deposits consist of three alluvial fans among them the youngest one together with the modern alluvial fan defines the Holocene deposit. The present deformation in the piedmont is accommodated along vertically left-lateral strike-slip faults and low-angle thrust faults trending in range from N070 to N110E.  相似文献   

11.
义马-硖石断带的演化特征及其地质意义   总被引：1，自引：0，他引：1  
义马断带位于华北煤田的西南边界,由一系列近于平行的走向北西西,倾向南西的逆断层所构成,上盘为O1-Pt地层,下盘为C—P煤系及著名的义马侏罗纪含煤盆地。据断带的构造、岩浆活动特征及下盘C—K古水流演化,作者认为,该断带萌生于海西期;印支末期强烈活动,致使义马盆地形成;定型于燕山晚期构造运动。随时间推移,断带在空间上则由南北发展,并在断带下盘派生出多条沿煤系煤层发育的缓倾角逆断层,上盘漂浮于煤层之上。因此,在不同地段,断带之下可能赋存有一定量的C、P和J煤层。   相似文献   

12.
The Somogy hills are located in the Pannonian Basin, south of Lake Balaton, Hungary, above several important tectonic zones. Analysis of industrial seismic lines shows that the pre-Late Miocene substratum is deformed by several thrust faults and a transpressive flower structure. Basement is composed of slices of various Palaeo-Mesozoic rocks, overlain by sometimes preserved Paleogene, thick Early Miocene deposits. Middle Miocene, partly overlying a post-thrusting unconformity, partly affected by the thrusts, is also present. Late Miocene thick basin-fill forms onlapping strata above a gentle paleo-topography, and it is also folded into broad anticlines and synclines. These folds are thought to be born of blind fault reactivation of older thrusts. Topography follows the reactivated fold pattern, especially in the central-western part of the study area.

The map pattern of basement structures shows an eastern area, where NE–SW striking thrusts, folds and steep normal faults dominate, and a western one, where E–W striking thrusts and folds dominate. Folds in Late Neogene are also parallel to these directions. A NE–SW striking linear normal fault and associated N–S faults cut the highest reflectors. The NE–SW fault is probably a left-lateral master fault acting during–after Late Miocene. Gravity anomaly and Pleistocene surface uplift maps show a very good correlation to the mapped structures. All these observations suggest that the main Early Miocene shortening was renewed during the Middle and Late Miocene, and may still persist.

Two types of deformational pattern may explain the structural and topographic features. A NW–SE shortening creates right-lateral slip along E–W faults, and overthrusts on NE–SW striking ones. Another, NNE–SSW shortening creates thrusting and uplift along E–W striking faults and transtensive left-lateral slip along NE–SW striking ones. Traces of both deformation patterns can be found in Quaternary exposures and they seem to be consistent with the present day stress orientations of the Pannonian Basin, too. The alternation of stress fields and multiple reactivation of the older fault sets is thought to be caused by the northwards translation and counter-clockwise rotation of Adria and the continental extrusion generated by this convergence.  相似文献   


13.
Geologic mapping and U–Pb detrital zircon geochronologic studies of (meta)sedimentary rocks in the Damxung area (∼90 km north of Lhasa) of the southern Lhasa terrane in Tibet provide new insights into the history of deformation and clastic sedimentation prior to late Cenozoic extension. Cretaceous nonmarine clastic rocks ∼10 km southeast of Damxung are exposed as structural windows in the footwall of a thrust fault (the Damxung thrust) that carries Paleozoic strata in the hanging wall. To the north of Damxung in the southern part of the northern Nyainqentanglha Range (NNQTL), metaclastic rocks of previously inferred Paleozoic age are shown to range in depositional age from Late Cretaceous to Eocene. The metaclastic rocks regionally dip southward and are interpreted to have been structurally buried in the footwall of the Damxung thrust prior to being tectonized during late Cenozoic transtension. Along the northern flank of the NNQTL, Lower Eocene syncontractional redbeds were deposited in a triangle zone structural setting. All detrital zircon samples of Cretaceous–Eocene strata in the Damxung area include Early Cretaceous grains that were likely sourced from the Gangdese arc to the south. We suggest that the that newly recognized Late Cretaceous to Early Eocene (meta)clastic deposits and thrust faults represent the frontal and youngest part of a northward directed and propagating Gangdese retroarc thrust belt and foreland basin system that led to significant crustal thickening and elevation gain in southern Tibet prior to India-Asian collision.  相似文献   

14.
It is commonly accepted that collisional orogens involve the reactivation of former rifted margins. While it remains debated how rift inheritance can be identified and how it controls the architecture of orogens this case study analyses the importance of rift-inheritance during reactivation of a passive margin. The study analyses complex, non-layer cake rift structures within the well-exposed Err and Platta nappes (SE Switzerland), representing the former distal Adriatic margin of the Alpine Tethys. Diagnostic criteria for rift inheritance include: (1) typical fault rocks with a mantle derived fluid signature, and (2) tectono-sedimentary breccias made of reworked exhumed basement and grading upwards into late syn- and post-rift sediments. Based on the study of “recognisable” features, a methodology is etablished, which enables to (1) map rift-related detachment faults and (2) to analyse their role during reactivation and formation of a thrust stack. First, second and third order thrust systems are defined. First order thrust systems juxtapose different rift domains (proximal, necking, and distal). Second order systems are dominantly made up of basement sheets sampling the former footwall of an extensional detachment fault. Third order systems mainly consist of the former hanging wall of an extensional detachment fault. A major result of this study is that thrust faults commonly reactivate former extensional detachment faults, especially in the exhumed mantle domain (Platta nappe), while in the hyperextended domain (Err nappe) reactivation of rift-inherited structures is more complex and often incomplete. The results of this study may help to better identify remnants of former distal margins and to define and analyse their complex stacking patterns observed in many internal parts of collisional orogens.  相似文献   

15.
The Dashui gold deposit is a structurally controlled, Carlin-type gold deposit hosted by recrystallised limestone in the West Qinling Orogen of Central China. The major, structurally late east-trending Dashui Fault forms the hanging wall to the gold mineralisation at the Dashui mine and defines the contact between Middle Triassic limestone and a steeply dipping overlying succession of Middle Triassic argillaceous limestone, dolomite, and sandstone. Multiple carbonate veins and large-scale supergene enrichment, represented by hematite, goethite, limonite and jarosite, characterise the deposit. Detailed geochronological investigation using zircon SHRIMP U-Pb dating reveals that volcanic rocks closely associated with the Dashui gold deposit were synchronous with the Ge’erkuohe Granite and pre-date mineralisation. The igneous dyke sample from the hanging wall has the same U-Pb zircon age as the footwall, ca. 213 Ma. (U-Th)/He thermochronology on dykes in the hanging wall and footwall of the Dashui Fault yields identical (U-Th)/He zircon ages of ca. 210 Ma but distinct (U-Th)/He apatite ages of ca. 136 and 211 Ma, respectively. Therefore, the hanging wall and footwall are interpreted as having distinct post-mineralisation exhumation histories. Reverse fault movement exhumed the hanging wall ~2 to 4 km since the Late Triassic with the main component of faulting taking place between the Late Triassic and Early Cretaceous. These relationships suggest a Late Triassic to Early Cretaceous age for the primary gold mineralisation at the Dashui gold deposit, with the corollary that any ‘missing portion’ of the deposit, previously hypothesised to exist in the hanging wall of the Dashui Fault, has been eroded away. The mineralisation in the footwall may have been supergene enriched soon after the primary mineralisation was emplaced, because it has been located at shallow depth since the Late Triassic. Semi-quantitative results obtained in this study also constrain the maximum depth of formation of the Dashui gold at no more than 2 km.  相似文献   

16.
A geophysical survey of the Oaxaca Fault along the north-trending Etla and Zaachila valleys area, southern Mexico, shows a series of NNW–SSE Bouguer and magnetic anomalies with steeper gradients towards the east. The Oaxaca Fault represents Tertiary extensional reactivation of the Juarez shear zone that constitutes the boundary between the Oaxaca and Juárez terranes. Cooperative interpretation of six combined gravity and magnetic NE–SW profiles perpendicular to the valleys indicates the presence of a composite depression comprising three N–S sub-basins: the northern Etla and southern Zaachila sub-basins separated by the Atzompa sub-basin. The Etla sub-basin is bounded by the moderately E-dipping, Etla Fault and the more steeply W-dipping Oaxaca Fault, which together constitute a graben that continues southwards into the Atzompa graben. The deeper Zaachila sub-basin, south of Oaxaca city, is a wide V-shaped graben with a horst in the middle. The new geophysical data suggest that the Oaxaca–Juarez terrane boundary is displaced sinistrally ca. 20 km along the E–W Donají Fault, which defines the northern boundary of the Zaachila sub-basin. On the other hand, the Oaxaca Fault may either continue unbroken southwards along the western margin of the horst in the Zaachila sub-basin or be offset along with the terrane boundary. The sinistral movement may have taken place either during the Late Mesozoic-Early Cenozoic, Laramide Orogeny as a lateral ramp in the thrust plane or under Miocene–Pliocene, NE–SW extension. The former suggests that the Donají Fault is a transcurrent fault, whereas the latter implies that it is a transfer fault. The models imply that originally the suture was continuous south of the Donaji Fault and provide a constraint for the accretion of the Oaxaca and Juarez terranes.  相似文献   

17.
In the Guadix-Baza Basin (Betic Cordillera) lies the Baza Fault, a structure that will be described for the first time in this paper. Eight gravity profiles and a seismic reflection profile, coupled with surface studies, indicate the existence of a NE-dipping normal fault with a variable strike with N-S and NW-SE segments. This 37-km long fault divides the basin into two sectors: Guadix to the West and Baza to the East. Since the Late Miocene, the activity of this fault has created a half-graben in its hanging wall. The seismic reflection profile shows that the fill of this 2,000–3,000 m thick asymmetric basin is syntectonic. The fault has associated seismicity, the most important of which is the 1531 Baza earthquake. Since the Late Tortonian to the present, i.e. over approximately the last 8 million years, extension rates obtained vary between 0.12 and 0.33 mm/year for the Baza Fault, being one of the major active normal faults to accommodate the current ENE–WSW extension produced in the central Betic Cordillera. The existence of this fault and other normal faults in the central Betic Cordillera enhanced the extension in the upper crust from the Late Miocene to the present in this regional compressive setting.  相似文献   

18.
乌孙山北缘断裂位于新疆伊宁盆地南部,是伊宁盆地与乌孙山的边界断裂,由多条平行或斜列的次级断层组成.断裂呈近东西走向,总体倾向南,山前主断裂主要表现为高角度逆冲,倾角50°~80°,前缘冲断面相对较缓.断裂上盘主要由石炭系-二叠系组成,下盘主要为第四系和侏罗系,断层两盘沉积物的ESR年代表明断裂带多处错断中、上更新统地层.野外地层接触关系和区域构造研究表明,在中更新世末以来,断裂强烈向北逆冲,与伊犁盆地北缘断裂共同控制了盆山地貌格局.伊宁盆地及邻区中更新世末的区域构造运动与青藏高原的共和运动时代相当,这次事件由南北天山向伊犁盆地的对冲挤压引起,动力来源于青藏高原向外扩展生长.   相似文献   

19.
The North Anatolian Fault Zone (NAFZ) is one of the most hazardous active faults on Earth, yet its Pliocene space‐time propagation across the north Aegean domain remains poorly constrained. We use low‐temperature multi‐thermochronology and inverse thermal modelling to quantify the cooling history of the upper crust across the Olympus range. This range is located in the footwall of a system of normal faults traditionally interpreted as resulting from superposed Middle–Late Miocene N–S stretching, related to the back‐arc extension of the Hellenic subduction zone, and a Pliocene‐Quaternary transtensional field, attributed to the south‐westward propagation of the NAFZ. We find that accelerated exhumational cooling occurred between 12 and 6 Ma at rates of 15–35 °C Ma?1 and decreased to <3 °C Ma?1 by 8–6 Ma. The absence of significant Plio‐Pleistocene cooling across Olympus suggests that crustal exhumation there is driven by late Miocene back‐arc extension, while the impact of the NAFZ remains limited.  相似文献   

20.
基于地震剖面的精细地质解释,识别出塔里木盆地巴楚隆起亚松迪断裂带及邻区三期冲断褶皱构造,并建立了其几何学模型。第一期活动的为沿中寒武统膏盐层滑脱的巴什托断裂,该断裂走向为NWW,形成于二叠纪之后、古近纪之前;第二期为基底卷入型的色力布亚断裂,该断裂走向为NNW,形成于晚中新世;第三期为分别沿中寒武统和古近系膏盐层滑脱的亚松迪深、浅层断裂,这两条断裂走向均为NW,形成于更新世-全新世。平面上,亚松迪断裂的发育位置受控于古近系膏盐层的分布范围。剖面上,与先存的巴什托断裂和色力布亚断裂的复合发育造成了亚松迪断裂带东、中、西三段不同的构造样式：东段发育断层传播褶皱(上)与突破型滑脱褶皱(下);中段发育断层传播褶皱(上)、突破型滑脱褶皱(中)和基底卷入构造(下);西段则发育滑脱褶皱(上)与断层转折褶皱(下),该段滑脱褶皱为亚松迪浅层断裂的西端点。最后,我们利用计算机数值模拟的方法对这三种冲断褶皱模型进行了验证。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号