首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Fractured-rock aquifers display spatially and temporally variable hydraulic conductivity generally attributed to variable fracture intensity and connectivity. Empirical evidence suggests fracture aperture and hydraulic conductivity are sensitive to in situ stress. This study investigates the sensitivity of fractured-rock hydraulic conductivity, groundwater flow paths, and advection-dominated transport to variable shear and normal fracture stiffness magnitudes for a range of deviatoric stress states. Fracture aperture and hydraulic conductivity are solved for analytically using empirical hydromechanical coupling equations; groundwater flow paths and ages are then solved for numerically using groundwater flow and advection-dispersion equations in a traditional Toth basin. Results suggest hydraulic conductivity alteration is dominated by fracture normal closure, resulting in decreasing hydraulic conductivity and increasing groundwater age with depth, and decreased depth of long flow paths with decreasing normal stiffness. Shear dilation has minimal effect on hydraulic conductivity alteration for stress states investigated here. Results are interpreted to suggest that fracture normal stiffness influences hydraulic conductivity of hydraulically active fractures and, thus, affects flow and transport in shallow (<1 km) fractured-rock aquifers. It is suggested that observed depth-dependent hydraulic conductivity trends in fractured-rock aquifers throughout the world may be partly a manifestation of hydromechanical phenomena.  相似文献   

2.
In general, faults cutting through the unconsolidated sediments of the Roer Valley Rift System (RVRS), The Netherlands, form strong barriers to horizontal groundwater flow. The relationships between deformation mechanisms along fault zones and their impact on the hydrogeological structure of the fault zone are analyzed in a shallow (0–5 m below land surface) trench over one of the faults in the study area. Recently developed digital-image-analysis techniques are used to estimate the spatial distribution of hydraulic conductivity at the millimeter-scale and to describe the micromorphologic characteristics of the fault zone. In addition, laboratory measurements of hydraulic conductivity on core-plug samples show the larger-scale distribution of hydraulic conductivity in the damage zone flanking the main fault plane. Particulate flow is the deformation mechanism at shallow depths, which causes the damage zone around the fault, in the sand-rich parts, to have a relatively enhanced hydraulic conductivity. The fault core is characterized by reduced hydraulic conductivity due to clay smearing, grain-scale mixing, and iron-oxide precipitation. Electronic Publication  相似文献   

3.
A hydrogeologic conceptual model that improves understanding of variability in aquitard integrity is presented for a fractured sedimentary bedrock unit in the Cambrian-Ordovician aquifer system of midcontinent North America. The model is derived from multiple studies on the siliciclastic St. Lawrence Formation and adjacent strata across a range of scales and geologic conditions. These studies employed multidisciplinary techniques including borehole flowmeter logging, high-resolution depth-discrete multilevel well monitoring, fracture stratigraphy, fluorescent dye tracing, and three-dimensional (3D) distribution of anthropogenic tracers regionally. The paper documents a bulk aquitard that is highly anisotropic because of poor connectivity of vertical fractures across matrix with low permeability, but with ubiquitous bed parallel partings. The partings provide high bulk horizontal hydraulic conductivity, analogous to aquifers in the system, while multiple preferential termination horizons of vertical fractures serve as discrete low vertical hydraulic conductivity intervals inhibiting vertical flow. The aquitard has substantial variability in its ability to protect underlying groundwater from contamination. Across widespread areas where the aquitard is deeply buried by younger bedrock, preferential termination horizons provide for high aquitard integrity (i.e. protection). Protection is diminished close to incised valleys where stress release and weathering has enhanced secondary pore development, including better connection of fractures across these horizons. These conditions, along with higher hydraulic head gradients in the same areas and more complex 3D flow where the aquitard is variably incised, allow for more substantial transport to deeper aquifers. The conceptual model likely applies to other fractured sedimentary bedrock aquitards within and outside of this region.  相似文献   

4.
 Two karst areas within Permian and Triassic carbonate rocks of the Codru Moma Mountains in the northwestern part of Romania yield thermal waters. Major karst springs occur where groundwater flow is intercepted by hydraulic barriers, which also results in the movement of water from deeper levels. At Moneasa, thermal groundwater rises along faults and fractures associated with a thrust, and at Vascau Town, water rises along faults marginal to the Beius Basin. Geochemistry suggests that the thermal component of the Moneasa groundwaters is derived from dolomites and that at least a proportion of the Vascau thermal waters originates from deeply buried Permian sandstones. Received, August 1999 / Revised, March 2000 / Accepted, March 2000  相似文献   

5.
Systematic field mapping of fracture lineaments observed on aerial photographs shows that almost all of these structures are positively correlated with zones of high macroscopic and mesoscopic fracture frequencies compared with the surroundings. The lineaments are subdivided into zones with different characteristics: (1) a central zone with fault rocks, high fracture frequency and connectivity but commonly with mineral sealed fractures, and (2) a damage zone divided into a proximal zone with a high fracture frequency of lineament parallel, non-mineralized and interconnected fractures, grading into a distal zone with lower fracture frequencies and which is transitional to the surrounding areas with general background fracturing. To examine the possible relations between lineament architecture and in-situ rock stress on groundwater flow, the geological fieldwork was followed up by in-situ stress measurements and test boreholes at selected sites. Geophysical well logging added valuable information about fracture distribution and fracture flow at depths. Based on the studies of in-situ stresses as well as the lineaments and associated fracture systems presented above, two working hypotheses for groundwater flow were formulated: (i) In areas with a general background fracturing and in the distal zone of lineaments, groundwater flow will mainly occur along fractures parallel with the largest in-situ rock stress, unless fractures are critically loaded or reactivated as shear fractures at angles around 30° to σH; (ii) In the influence area of lineaments, the largest potential for groundwater abstraction is in the proximal zone, where there is a high fracture frequency and connectivity with negligible fracture fillings. The testing of the two hypotheses does not give a clear and unequivocal answer in support of the two assumptions about groundwater flow in the study area. But most of the observed data are in agreement with the predictions from the models, and can be explained by the action of the present stress field on pre-existing fractures.  相似文献   

6.
Moore  J. P.  Walsh  J. J. 《Hydrogeology Journal》2021,29(8):2613-2632

Faults and fractures are a critical store and pathway for groundwater in Ireland’s limestone bedrock aquifers either directly as conductive structures or indirectly as the locus for the development of karst conduits. From the quantitative analysis of post-Devonian faults and fractures in a range of lithological sequences, this report describes the principal characteristics of Cenozoic strike-slip faults and joints, the youngest and the most intrinsically conductive fractures within Irish bedrock. Analysis of these structures in more than 120 outcrop, quarry, mine and cave locations in a range of bedrock types, provides a basis for: (1) definition of quantitative models for their depth dependency, lithological control, scaling systematics and links to preexisting structure, (2) conceptualisation of their impact on groundwater behaviour, and (3) estimation of groundwater flow parameters. The quantitative models provide constraints on fracture-controlled flow connectivity. Commonly observed decreases in sustainable flows and water strike interceptions with depth are attributed to increasing confinement and decreasing fracture connectivity and dissolution. Faults and joints have quite different end member geometries, with faults having strongly heterogeneous scale-independent properties and joints more often showing scale-dependent stratabound properties. The highest and most sustainable groundwater flows are usually associated with the complexity of structure of Cenozoic faults and of preexisting Carboniferous structures (on which conductive fracturing localises), enhanced by karstification and strongly jointed limestone bedrock particularly in the near-surface. Increased groundwater flow is promoted within bedded, rather than massive (i.e. unbedded), limestone sequences, characterised by bedding-parallel fractures and karst connecting otherwise subvertical fractures and subvertical wells.

  相似文献   

7.
This work presents petrological and geochemical results of the black shales interval from Permian and Devonian strata of the Paraná Basin, Brazil and its relationships with fluoride of groundwater from Guarani Aquifer System. The Guarani Aquifer, located in South Brazil, Uruguay, Paraguay and Argentine, presents contents of fluoride higher than the Brazilian accepted potability limits. Several hypotheses have been presented for the origin of the fluoride in the groundwater of the Guarani Aquifer. Microcrystalline fluorite was registered in black shales of Ponta Grossa and Irati formations from Paraná Basin. The results shown in this work suggest that fluoride present in groundwater of Guarani Aquifer can be originated in deeper groundwater that circulates in Ponta Grossa and Irati formations. The interaction of the groundwater coming from deeper black shales with the groundwater-bearing Aquifer Guarani System occurs through regional fragile structures (faults and fractures) that constitute excellent hydraulic connectors between the two sedimentary packages. The microcrystalline fluorite registered in Ponta Grossa and Irati Formations can be dissolved promoting fluoride enrichment in groundwater of these black shales and Guarani Aquifer System.  相似文献   

8.
Groundwater in shallow unconsolidated sedimentary aquifers close to the Bornheim fault in the Lower Rhine Embayment (LRE), Germany, has relatively low δ2H and δ18O values in comparison to regional modern groundwater recharge, and 4He concentrations up to 1.7?×?10?4 cm3 (STP) g–1?±?2.2 % which is approximately four orders of magnitude higher than expected due to solubility equilibrium with the atmosphere. Groundwater age dating based on estimated in situ production and terrigenic flux of helium provides a groundwater residence time of ～107 years. Although fluid exchange between the deep basal aquifer system and the upper aquifer layers is generally impeded by confining clay layers and lignite, this study’s geochemical data suggest, for the first time, that deep circulating fluids penetrate shallow aquifers in the locality of fault zones, implying  that sub-vertical fluid flow occurs along faults in the LRE. However, large hydraulic-head gradients observed across many faults suggest that they act as barriers to lateral groundwater flow. Therefore, the geochemical data reported here also substantiate a conduit-barrier model of fault-zone hydrogeology in unconsolidated sedimentary deposits, as well as corroborating the concept that faults in unconsolidated aquifer systems can act as loci for hydraulic connectivity between deep and shallow aquifers. The implications of fluid flow along faults in sedimentary basins worldwide are far reaching and of particular concern for carbon capture and storage (CCS) programmes, impacts of deep shale gas recovery for shallow groundwater aquifers, and nuclear waste storage sites where fault zones could act as potential leakage pathways for hazardous fluids.  相似文献   

9.
The equation of groundwater flow in marine island aquifers in which there is time-independent, spatially-variable recharge and pumping is solved in closed form for rectangular, circular, and elliptical island geometries. The solution of the groundwater flow equation is expressed in terms of the elevation of the phreatic surface within the flow domain. The depth of the seawater-freshwater interface below mean sea level follows from the Dupuit–Ghyben–Herzberg relation. The method of solution presented in this work relies on expanding the hydraulic head and forcing function (recharge and groundwater extraction) as Fourier series that transforms the two-dimensional Poisson-type flow equations into second-order ordinary differential equations solvable using classical theory. The important case of constant recharge (without groundwater extraction) leads to solutions in which the hydraulic head is expressible as the product of a flow factor equal to the squared root of the ratio of recharge over hydraulic conductivity times a geometric factor involving island shape parameters and flow boundary conditions. Estimability conditions for the hydraulic conductivity are derived for the cases of constant recharge and spatially variable recharge with pumping.  相似文献   

10.
Complex flow circulation patterns are likely to be present in fault‐controlled groundwater flow systems, such as carbonate aquifers. Nevertheless, not much information is available for faults in carbonates, and their hydrogeological behaviour is often neglected in conceptual and numerical models. The understanding of this aspect of subsurface fluid flow has been improved in a carbonate aquifer, where hydrogeological investigations at site scale demonstrated the existence of fault zones that act as barriers. The hydraulic conductivity of the fault core is as low as that of siliciclastic rocks that represent the regional aquitard of the carbonate aquifer. Despite the lower permeability, the fault zones allow a significant groundwater flowthrough and a good interdependence of piezometric heads upgradient and downgradient of the faults. Because of this discontinuous heterogeneity, the aquifer looks like a basins‐in‐series system, where seasonal springs can be detected along some fault zones, as a function of groundwater level fluctuations.  相似文献   

11.
Fault zone structure and lithology affect permeability of Triassic Muschelkalk limestone-marl-alternations in Southwest Germany, a region characterized by a complex tectonic history. Field studies of eight fault zones provide insights into fracture system parameters (orientation, density, aperture, connectivity, vertical extension) within fault zone units (fault core, damage zone). Results show decreasing fracture lengths with distances to the fault cores in well-developed damage zones. Fracture connectivity at fracture tips is enhanced in proximity to the slip surfaces, particularly caused by shorter fractures. Different mechanical properties of limestone and marl layers obviously affect fracture propagation and thus fracture system connectivity and permeability. Fracture apertures are largest parallel and subparallel to fault zones and prominent regional structures (e.g., Upper Rhine Graben) leading to enhanced fracture-induced permeabilities. Mineralized fractures and mineralizations in fault cores indicate past fluid flow. Permeability is increased by the development of hydraulically active pathways across several beds (non-stratabound fractures) to a higher degree than by the formation of fractures interconnected at fracture tips. We conclude that there is an increase of interconnected fractures and fracture densities in proximity to the fault cores. This is particularly clear in more homogenous rocks. The results help to better understand permeability in Muschelkalk rocks.  相似文献   

12.
广西布泉地下河发育特征及连通性分析   总被引：1，自引：0，他引：1  
为查明广西布泉地下河岩溶发育规律和分布特征,在1∶5万水文地质调查的基础上,对该区地下水水位动态进行长期观测和示踪,研究布泉地下河地表和地下岩溶发育特征,分析布泉河上游和中游各支流间的连通性。该区地表主要为峰丛洼地,溶蚀强烈,地下河管道主要沿断层展布,平面形态呈树枝型,剖面形态呈阶梯型。地下河中下游管道的地下水水位动态对降雨的响应滞后,上游管道及远离管道区的地下水水位动态对降雨的响应敏感。地下河上游和中游地下水平均流速分别为1 166 m/d和1 079 m/d,地下水总体径流速度较快,上游地下水的水力坡度大于中游。地下河上游管道分支较多,地下水连通性较复杂,中游主管道明显,连通性较好。  相似文献   

13.
Hydraulic conductivity sometimes exhibits complicated spatial variation over a site. A thorough understanding of the spatial distributions of hydraulic conductivity helps to make deterministic models of groundwater more accurate. This study presents a novel procedure that combines simulated annealing algorithms (SA) and the shortest distance method (SD) with the modular three-dimensional groundwater flow model (MODFLOW). The procedure is applied to a hypothetical site with groundwater-monitoring wells to minimize the difference between simulated and observed hydraulic head for optimal zoning of the spatial distribution of hydraulic conductivity. The results of this optimal zoning method indicate that this new procedure not only improves the efficiency of optimization, but also increases the probability of finding the global optimum, minimizing the errors of the hydraulic head simulated by MODFLOW in two scenarios, one with known and the other with unknown hydraulic conductivity. The results also illustrated that the procedure can effectively determine and delineate hydrogeological zones.  相似文献   

14.
Tight sandstone gas in the Linxing Block, eastern Ordos Basin, has been successfully exploited. The high performance is mainly a result of the special geological conditions. The key geological controls for high production have been discussed on the basis of seismic data, field observation, sample features, mercury porosimetry, mechanical properties, and basin modeling. Firstly, the coal measures have good gas generation potential, not only because of the existence of coalbeds and organic-rich shales, but also because coal laminae and microbial mats in the shales significantly increase their total organic carbon(TOC) contents. Secondly, except for the uplifted zone of the Zijinshan complex and the eastern fault zone, rare large faults develop in the Carboniferous–Permian sequence, ensuing the sealing capacity of cap rock. Small fractures generally concentrated in the sandstones rather than the mudstones. Thirdly, gas accumulation in the Linxing Block was controlled by the tectonic, burial and thermal histories. Gas accumulation in the Linxing Block started in the Late Triassic, followed by three short pauses of thermal maturation caused by relatively small uplifts;the maximum hydrocarbon generation period is the Early Cetaceous as a combined result of regional and magmatic thermal metamorphisms. Field profiles show abundant fractures in sandstone beds but rare fractures in mudstone beds. Mechanical properties, determined by lithostratigraphy, confine the fractures in the sandstones, increasing the permeability of sandstone reservoirs and retaining the sealing capacity of the mudstone cap rocks. The modern ground stress conditions favor the opening of predominant natural fractures in the NNW-SSE and N-S directions. These conclusions are useful for exploring the potential tight sandstone gas field.  相似文献   

15.
A hydrogeological study was conducted in northwestern New Brunswick, Canada, to improve the predictability of fracture-dominated groundwater flow within folded bedrock composed of fine-grained turbidites. Borehole televiewer logging and outcrop mapping, integrated with hydraulic packer tests revealed enhanced hydraulic conductivity associated with northeasterly striking bedding-plane fractures formed during folding and flexural slip. These fractures impart azimuthal anisotropy to the aquifer because of moderately dipping fold limbs. High-angle fractures form a well-developed non-stratabound network, comprising two open fracture sets striking NNE parallel to the current direction of principal stress, and WNW parallel to the direction of principal stress that dominated during the Acadian orogeny. The subset of fractures showing significant oxidation, deemed most important to the groundwater flow system, is dominated by bedding-plane and high-angle fractures striking near-parallel to the maximum principal stress direction, resulting in extensional opening and enhanced hydraulic conductivities. An equivalent porous media model, incorporating anisotropy and varying hydraulic conductivity with depth, indicates that horizontal flow dominates the aquifer with relatively minor exchange between different model layers. These findings have implications for understanding flow directions in the Black Brook Watershed and elsewhere in the Matapédia Basin where fractures formed under similar stress conditions.  相似文献   

16.
Due to changes in lithostatic pressure, differential fracturing across bedding planes and irregularities in depositional environments, hydraulic conductivity exhibits heterogeneities and trends at various spatial scales. Using spectral theory, we have examined the effect of trends in hydraulic conductivity on (1) the solution of the mean equation for hydraulic head, (2) the covariance of hydraulic head, (3) the cross-covariances of hydraulic head and log-hydraulic conductivity perturbations and their gradients, and (4) the effective hydraulic conductivity. It is shown that the field of hydraulic head is sensitive to the presence of trends in ways that cannot be predicted by the classical analysis based on stationary hydraulic conductivity fields. The controlling variables for the second moments of hydraulic head are the mean hydraulic gradient, the correlation scale of log-hydraulic conductivity and its variance, and the slope of the trend in log-hydraulic conductivity. The mean hydraulic gradient introduces complications in the analysis since it is, in general, spatially variable. In this respect, our results are approximate, yet indicative of the true role of spatially variable patterns of log-hydraulic conductivity on groundwater flow systems.  相似文献   

17.
This paper reviews the data concerning the fracture network and the hydraulic characteristics of faults in an active zone of the Gulf of Corinth. Pressure gap measured through fault planes shows that in this area the active normal faults (Aigion, Helike) act, at least temporarily and locally, as transversal seal. The analysis of the carbonate cements in the fractures on both the hangingwall and the footwall of the faults also suggests that they have acted as local seals during the whole fault zone evolution. However, the pressure and the characteristics of the water samples measured in the wells indicate that meteoric water circulates from the highest part of the relief to the coast, which means it goes through the fault zones. Field quantitative analysis and core studies from the AIG-10 well have been performed to define both regional and fault-related fracture networks. Then laboratory thin section observations have been done to recognize the different fault rocks characterizing the fault zone components. These two kinds of approach give information on the permeability characteristics of the fault zone. To synthesize the data, a schematic conceptual 3D fluid flow modeling has been performed taking into account fault zone permeability architecture, sedimentation, fluid flow, fault vertical offset and meteoric water influx, as well as compaction water flow. This modeling allows us to fit all the data with a model where the fault segments act as a seal whereas the relays between these segments allow for the regional flow from the Peloponnese topographic highs to the coast.  相似文献   

18.
孙蓉琳  梁杏  靳孟贵 《岩土力学》2006,27(9):1490-1494
在金沙江溪洛渡水电站坝区玄武岩中,进行了3种水力试验,探讨玄武岩渗透性及其尺度效应。平硐渗水试验的试验尺度为1～2 m,渗透系数为10-4～101 m/d,非常离散;地下水示踪试验的尺度为70～145 m,渗透系数为10-0.5～100.5 m/d,非常集中;压水试验的试验尺度为4～7 m,渗透系数值10-2～100 m/d。试验结果显示渗透系数随着试验尺度的增加而增大,笔者认为产生尺度效应的原因在于非均质性。小尺度试验常作用在局部基质段或单条裂隙上,而大尺度试验常穿越几条大裂隙,所获得的渗透系数值要大于前者。在进行裂隙岩体地下水渗流研究时,针对不同尺度的研究对象,应选择不同尺度的野外水力试验来求取渗透系数。  相似文献   

19.
Recent work in southern Ontario, Canada, demonstrates anomalously high vertical groundwater flow velocities (>1 m/year) through a thick (as much as 60 m), sandy silt till aquitard (Northern till), previously assumed to be of very low permeability (hydraulic conductivity <10–10 m/s). Rapid recharge is attributed to the presence of fractures and sedimentary heterogeneities within the till, but the field-scale flow regime is poorly understood. This study identifies the nature of physical groundwater pathways through the till and provides estimates of the associated groundwater fluxes. The aquitard groundwater flow system is characterized by integrating details of the outcrop and subsurface sedimentary characteristics of the till with field-based hydrogeologic investigation and numerical modeling. Outcrop and subsurface data identify a composite internal aquitard stratigraphy consisting of tabular till beds (till elements) separated by laterally continuous sheet-like sands and gravels (interbeds) and boulder pavements. Individual till elements contain sedimentary heterogeneities, including discontinuous sand and gravel lenses, vertical sand dikes, and zones of horizontal and vertical fractures. Hydrogeologic field investigations indicate a three-layer aquitard flow system, consisting of upper and lower zones of more hydraulically active and heterogeneous till separated by a middle unit of relatively lower hydraulic conductivity. Groundwater pathways and fluxes in the till were evaluated using a two-dimensional aquitard/aquifer flow model which indicates a step-wise flow mechanism whereby groundwater moves alternately downward along vertical pathways (fractures, sedimentary dikes) and laterally along horizontal sand interbeds within the till. This model is consistent with observed hydraulic-head and isotope profiles, and the presence of tritiated pore waters at various depths throughout the till. Simulations suggest that a bulk aquitard vertical hydraulic conductivity on the order of 1×10–9 m/s is required to reproduce observed hydraulic-head and tritium profiles. Electronic Publication  相似文献   

20.
 Yucca Mountain, the proposed site for the high-level nuclear waste repository, is located just south of where the present water table begins a sharp rise in elevation. This large hydraulic gradient is a regional feature that extends for over 100 km. Yucca Mountain and its vicinity are underlain by faulted and fractured tuffs with hydraulic conductivities controlled by flow through the fractures. Close to and parallel with the region of large hydraulic gradient, and surrounding the core of the Timber Mountain Caldera, there is a 10- to 20-km-wide zone containing few faults and thus, most likely, few open fractures. Consequently, this zone should have a relatively low hydraulic conductivity, and this inference is supported by the available conductivity measurements in wells near the large hydraulic gradient. Also, slug injection tests indicate significantly higher pressures for fracture opening in wells located near the large hydraulic gradient compared to the opening pressures in wells further to the south, hence implying that lower extensional stresses prevail to the north with consequently fewer open fractures there. Analytical and numerical modeling shows that such a boundary between media of high and low conductivity can produce the observed, large hydraulic gradient, with the high conductivity medium having a lower elevation than the water table. Further, as fractures can close due to tectonic activity, the conductivity of the Yucca Mountain tuffs can be reduced to a value near that for the hydraulic barrier due to strain release by a moderate earthquake. Under these conditions, simulations show that the elevation of the steady-state water table could rise between 150 and 250 m at the repository site. This elevation rise is due to the projected shift in the location of the large hydraulic gradient to the south in response to a moderate earthquake, near magnitude 6, along one of the major normal faults adjacent to Yucca Mountain. As the proposed repository would only be 200–400 m above the present water table, this predicted rise in the water table indicates a potential hazard involving water intrusion. Received: 7 June 1996 / Accepted: 19 November 1996  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号