共查询到20条相似文献，搜索用时 965 毫秒
1.
模拟弹性波在孔隙介质中传播，需要稳定有效的吸收边界来消除或尽可能的减小由人工边界引起的虚假反射. 本文在前人工作基础上，首次建立了弹性孔隙介质情况下完全匹配层吸收边界的高阶速度-应力交错网格有限差分算法，并详细讨论了完全匹配层的构建及其有限差分算法实现. 首先，本文通过均匀孔隙模型的数值解与解析解的对比，验证所提出的数值方法的正确性；然后，本文考察了完全匹配层对不同入射角度入射波和自由表面上的瑞利波的吸收性能，将完全匹配层与廖氏和阻尼吸收边界进行了对比，研究了这三种吸收边界在不同吸收厚度情况下对弹性波吸收能力. 数值结果表明，在孔隙介质中，完全匹配层作为吸收边界能十分有效地吸收衰减外行波，无论对体波还是面波，是一种高效边界吸收算法. 相似文献
2.
3.
常见弹性波动理论的建立是基于介质均匀这一基本假设,实际介质的非均匀性非常普遍.为研究连续介质中波的传播特征,本文从弹性力学中建立弹性波动方程的三个基本方程出发,考虑连续介质弹性参数的空变特征,建立非均匀介质的弹性波动方程,利用Alkhalifah声学近似思想建立位移表征的纵波波动方程,利用本征值问题求解方法建立标量波频率-波数域传播算子,从而建立描述纵波传播的标量波方程,其中波函数为纵波位移的散度,不同于均匀介质标量波方程的波函数为位移势.随后推导含PML边界波动方程差分格式并建立不同模型数值模拟进行数值试算,与均匀假设标量波方程和变密度方程对比证明本方法的准确性和稳定性. 相似文献
4.
完全匹配层(PML)作为一种稳定高效的吸收边界条件,广泛应用于基于一阶电磁波动方程的探地雷达(GPR)数值模拟中.为解决基于二阶电磁波动方程的GPR数值模拟的吸收边界问题,本文借鉴二阶弹性波动方程的PML边界条件构建思想,提出了一种适合二阶电磁波动方程GPR时域有限元模拟的PML边界条件.从二阶电磁波动方程出发,基于复拉伸坐标变换,推导了PML算法的频域表达式;通过合理构造辅助微分方程,得到了PML算法的时域表达式,并以变分形式(弱形式)加载到GPR时域有限元方程中,实现了PML边界条件在二阶电磁波动方程GPR时域有限元模拟中的应用.在此基础上,对比了无边界条件、Sarma边界条件和PML边界条件下均匀模型的波场快照、单道波形、时域反射误差和能量衰减曲线,结果表明:PML边界条件的吸收效果要远优于Sarma边界条件,具有近似零反射系数.一个复杂介质模型的正演模拟验证了PML边界条件在非均匀地电结构中电磁波传播模拟的良好吸收效果. 相似文献
5.
应用高精度人工边界条件可有效提升近场波动数值模拟计算效率.完美匹配层是吸收层形式高精度人工边界条件,匹配层内场方程和界面条件通常分别采用复坐标延伸技术变换强形式无限域内波动方程和界面条件得到,亦曾将无限域界面条件当作匹配层界面条件.场方程和界面条件构建过程相互独立,可能出现匹配不合理而引发数值失稳、计算精度低下等问题.本文提出采用复坐标延伸技术变换弱形式无限域波动方程以构建完美匹配层的方法.弱形式波动方程耦合了波动方程及界面条件,进而规避了变换后所得场方程与界面条件之间的匹配不合理问题.新方法可直接建立弱形式匹配层,在此基础上亦可给出强形式匹配层.弱形式便于有限元离散,强形式便于有限差分离散.基于弱形式完美匹配层,结合勒让德谱元建立了弹性介质近场波动谱元模拟方案.利用算例验证了新方案的精度及数值稳定性.本文工作可直接推广至多相耦合介质近场波动数值模拟. 相似文献
6.
Spectral element method (SEM) for elastic media is well known for its great flexibility and high accuracy in solving problems with complex geometries. It is an advanced choice for wave simulations. Due to anelasticity of earth media, SEM for elastic media is no longer appropriate. On fundamental of the second-order elastic SEM, this work takes the viscoelastic wave equations and the vertical transversely isotropic (VTI) media into consideration, and establishes the second-order SEM for wave modeling in viscoelastic VTI media. The second-order perfectly matched layer for viscoelastic VTI media is also introduced. The problem of handling the overlapped absorbed corners is solved. A comparison with the analytical solution in a two-dimensional viscoelastic homogeneous medium shows that the method is accurate in the wave-field modeling. Furtherly, numerical validation also presents its great flexibility in solving wave propagation problems in complex heterogeneous media. This second-order SEM with perfectly matched layer for viscoelastic VTI media can be easily applied in wave modeling in a limited region. 相似文献
7.
《中国科学:地球科学(英文版)》2021,(6)
The perfectly matched layer(PML) boundary condition has been proven to be effective for attenuating reflections from model boundaries during wavefield simulation. As such, it has been widely used in time-domain finite-difference wavefield simulations. The conventional PML has poor performance for near grazing incident waves and low-frequency reflections. To overcome these limitations, a more complex frequency-shifted stretch(CSF) function is introduced, which is known as the CFSPML boundary condition and can be implemented in the time domain by a recursive convolution technique(CPML). When implementing the PML technique to second-order wave equations, all the existing methods involve adding auxiliary terms and rewriting the wave equations into new second-order partial differential equations that can be simulated by the finite-difference scheme, which may affect the efficiency of numerical simulation. In this paper, we propose a relatively simple and efficient approach to implement CPML for the second-order equation system, which solves the original wave equations numerically in the stretched coordinate. The spatial derivatives in the stretched coordinate are computed by adding a correction term to the regular derivatives. Once the first-order spatial derivatives are computed, we computed the second-order spatial derivatives in a similar way; therefore, we refer to the method as two-step CPML(TS-CPML). We apply the method to the second-order acoustic wave equation and a coupled second-order pseudo-acoustic TTI wave equation. Our simulations indicate that amplitudes of reflected waves are only about half of those computed with the traditional CPML method, suggesting that the proposed approach has computational advantages and therefore can be widely used for forwarding modeling and seismic imaging. 相似文献
8.
本文提出了一种新的基于平均导数优化方法(average-derivative optimal method,简称ADM)的二维VTI介质qP波波动方程频率空间域二阶9点格式,这种新算法将二维VTI介质qP波波动方程中中心空间导数项的差分近似表示为正交方向上3个网格点的加权平均形式.通过最小二乘优化方法求取空间导数项和加速度项的加权优化系数从而使数值频散达到极小化,每个波长所需要的网格点数在1%的误差范围内仅为3.57个网格点数,而VTI介质常规9点差分格式在相同的误差范围内则需要约12个网格点数,新方法的计算精度明显提高.复杂BP2007 2D VTI海洋标准模型数值模拟结果也验证了本文VTI介质9点ADM算法的有效性和准确性. 相似文献
9.
During seismic wave propagation on a free surface, a strong material contrast boundary develops in response to interference by P- and S- waves to create a surfacewave phenomenon. To accurately determine the effects of this interface on surface-wave propagation, the boundary conditions must be accurately modeled. In this paper, we present a numerical approach based on the dynamic poroelasticity for a space–time-domain staggeredgrid finite-difference simulation in porous media that contain a free-surface boundary. We propose a generalized stess mirror formulation of the free-surface boundary for solids and fluids in porous media for the grid mesh on which lays the free-surface plane. Its analog is that used for elastic media, which is suitable for precise and stable Rayleigh-type surface-wave modeling. The results of our analysis of first kind of Rayleigh (R1) waves obtained by this model demonstrate that the discretization of the mesh in a similar way to that for elastic media can realize stable numerical solutions with acceptable precision. We present numerical examples demonstrating the efficiency and accuracy of our proposed method. 相似文献
10.
Earth medium is not completely elastic, with its viscosity resulting in attenuation and dispersion of seismic waves. Most viscoelastic numerical simulations are based on the finite-difference and finite-element methods. Targeted at viscoelastic numerical modeling for multilayered media, the constant-Q acoustic wave equation is transformed into the corresponding wave integral representation with its Green’s function accounting for viscoelastic coefficients. An efficient alternative for full-waveform solution to the integral equation is proposed in this article by extending conventional frequency-domain boundary element methods to viscoelastic media. The viscoelastic boundary element method enjoys a distinct characteristic of the explicit use of boundary continuity conditions of displacement and traction, leading to a semi-analytical solution with sufficient accuracy for simulating the viscoelastic effect across irregular interfaces. Numerical experiments to study the viscoelastic absorption of different Q values demonstrate the accuracy and applicability of the method. 相似文献
11.
将波动方程变换至Hamilton体系,构造了一种新的保结构算法,即最优化辛格式广义褶积微分算子(OSGCD). 在时间离散上,首先引入了Lie算子设计二级二阶辛格式,基于最小误差原理得到了优化的辛格式. 在空间离散上,引入广义离散奇异核褶积微分算子计算空间微分,提出了一种有效方法优化GCD并得到了稳定的算子系数. 针对本文发展的新方法,给出了OSGCD稳定性条件. 在数值实验中,将OSGCD与多种方法比较,从精度和计算效率两方面分析了OSGCD的计算优势,计算结果也表明OSGCD长时程以及非均匀介质中地震波模拟亦具有较强能力. 相似文献
12.
A staggered-grid high-order finite-difference modeling for elastic wave field in arbitrary tilt anisotropic media 总被引：1，自引：0，他引：1
Introduction The real Earth usually presents anisotropy. Therefore, it is of theoretical and practical sig- nificance for many fields as oil and gas, seismic exploration and production, earthquake prediction, detection of deep structure and so on to study on seismic wave theory, numerical simulation method and its applications in the anisotropic media (Crampin, 1981, 1984; Crampin et al, 1986; Hudson et al, 1996; Liu et al, 1997; Thomsen, 1986, 1995; TENG et al, 1992; HE and ZHANG, 1996)… 相似文献
13.
时间域常Q黏声波方程,由于含分数阶时间导数项,数值求解需要大量内存,计算效率低,不利于地震偏移的实施.通过一系列近似,可将该方程简化为介质频散效应和衰减效应解耦的分数阶拉普拉斯算子黏声波方程,数值求解内存需求少,计算效率高.本文采用交错网格有限差分逼近时间导数,改进的伪谱法计算空间导数,PML吸收边界去除边界反射,对该方程进行数值离散和地震正演模拟,开展地震数据的黏声介质逆时偏移,实现波场逆时延拓过程中同时完成频散校正和衰减补偿.改善深层构造的成像精度,数值结果表明,基于分数阶拉普拉斯算子解耦的黏声介质地震正演模拟与逆时偏移可大幅度提高地震模拟计算效率,偏移剖面明显优于常规声波偏移剖面,极大改善深层构造的成像品质. 相似文献
14.
给出了任意倾斜各向异性介质中二维三分量一阶应力速度弹性波方程交错网格任意偶数阶精度有限差分格式及其稳定性条件,并推导出了二维任意倾斜各向异性介质完全匹配吸收层法边界条件公式和相应的交错网格任意偶数阶精度差分格式. 数值模拟结果表明,该方法模拟精度高,计算效率高,边界吸收效果好. 各向异性介质中弹性波波前面形态复杂, 且qP波波速不总是比qS波波速快. qS波波前面和同相轴的三分叉现象普遍, 且其同相轴一般不是双曲线型. 当TI介质倾斜时,3个分量上均能够观测到横波分裂现象, 而且各波形的同相轴变得不对称. 相似文献
15.
The Numerical Modeling of 3-D Elastic Wave Equation Using a High-Order,Staggered-Grid, Finite Difference Scheme 总被引：1，自引：0，他引：1
XiaFan DongLiangguo MaZaitian 《应用地球物理》2004,1(1):38-41
This article provides the application of the high-order, staggered-grid, finite-difference scheme to model elastic wave propagation in 3-D isotropic media. Here, we use second-order, temporal-and high-order spatial finite-difference formulations with a staggered grid for discretization of the 3-D elastic wave equations of motion. The set of absorbing boundary conditions based on paraxial approximations of 3-D elastic wave equations are applied to the numerical boundaries. The trial resuits for the salt model show that the numerical dispersion is decreased to a minimum extent, the accuracy high and diffracted waves abundant. It also shows that this method can be used for modeling wave propagation in complex media with the lateral variation of velocity. 相似文献
16.
本文针对流固边界耦合介质提出了一种高效、稳定的正演数值模拟方法. 首先,从一阶位移-应力弹性波方程出发,基于海底流固边界的位移和应力的连续性条件,采用三次样条海底界面定量表征方法,推导出不规则海底界面下流固边界耦合介质中的地震波波动方程;其次,通过空间微分的高阶差分格式提高数值模拟的空间精度,并结合已推导的地震波波动方程,将四阶时间微分转换至高阶空间微分,进一步提高了数值模拟的时间精度;最后,在与标量波波动方程数值模拟结果对比分析的基础上,分别利用简单的水平层状模型和复杂海底模型,验证和讨论了本文提出的流固边界耦合介质高阶有限差分地震波正演模拟方法的有效性和准确性. 相似文献
17.
从各向同性介质中波场数值模拟的褶积微分算子法出发,推导出了各向异性双相介质中波场传播数值计算的褶积新算法.将常见的二阶微分Biot波动方程用等效的一阶速度—应力双曲方程表示,其中未知的波场向量包括固相和流体的速度分量和应力分量,由此对方程的时间项使用交错网格差分方法计算,而对空间项则采用褶积微分算法进行求解.对各向异性双相介质在单层介质模型和双层介质模型中的波场特征进行了研究.研究的结果显示,在两层介质分界面上当地震波产生反射时能观测到两类纵波和横波,并且在衰减系数大的介质里慢纵波很难见到. 相似文献
18.
THE APPLICATION OF PML BOUNDARY CODITIONS IN THE SIMULATION OF SEISMIC WAVE BY THE HIGH-ORDER STAGGERED-GRID FINITE DIFFERENCES AT THE TRANSVERSELY ISOTROPIC MEDIA 
下载免费PDF全文
下载免费PDF全文 In the realm of the numerical simulation, finite difference method and finite element method are more intuitive and effective than other simulation methods. In the process of simulating seismic wave propagation, the finite differences method is widely used because of its high computational efficiency and the advantage of the algorithm is more efficient. With the demand of precision, more and more researchers have proposed more effective methods of finite differences, such as the high-order staggered-grid finite differences method, which can restore the actual process of wave propagation on the premise of ensuring accuracy and improving the efficiency of operation. In the past numerical simulation of seismic wave field, different models of isotropic medium are mostly used, but it is difficult to reflect the true layer situation. With the research demand of natural seismology and seismic exploration, the research on anisotropic media is more and more extensive. Transversely isotropic(TI)media can well simulate the seismic wave propagation in the formation medium, such as gas-bearing sandstone, mudstone, shale et al., the character of TI media is reflected by introducing the Thomsen parameters to reflect its weak anisotropy of vertical direction by using Thomson parameter. Therefore, studying the process of seismic wave propagation in TI media can restore the true information of the formation to the greatest extent, and provide a more reliable simulation basis for the numerical simulation of seismic wave propagation. In the geodynamic simulation and the numerical simulation of the seismic wave field, under the limited influence of the calculation area, if no boundary conditions are added, a strong artificial boundary reflection will be generated, which greatly reduces the validity of the simulation. In order to minimize the influence of model boundaries on the reflection of seismic waves, it is often necessary to introduce absorbing boundary conditions. At present, there are three types of absorption boundary conditions: one-way wave absorption boundary, attenuation absorption boundary, and perfectly matched layer(PML)absorption boundary. In terms of numerical simulation of seismic waves, the boundary absorption effect of PML is stronger than the first two, which is currently the most commonly used method, and it also represents the cutting-edge development direction of absorption boundary technology. The perfectly matched layer absorbing boundary is effectively applied to eliminating the reflective waves from model boundaries, but for transversely isotropic medium, the effect of the absorbing is not very well. For this reason, the elastic dynamic wave equations in transversely isotropic media are derived, and we describe a second-order accurate time, tenth-order accurate space, formulation of the Madariaga-Virieux staggered-grid finite difference methods with the perfectly matched layer(PML)are given. In addition, we have established vertical transversely isotropic(VTI)media and arbitrary inclined tilted transversely isotropic(TTI)media models, using a uniform half-space velocity model and a two-layer velocity model, respectively. By combining the actual geoscience background, we set the corresponding parameters and simulation conditions in order to make our model more research-oriented. When setting model parameters, different PML thickness, incident angle, source frequency and velocity layer models were transformed to verify the inhibition of boundary reflection effect by PML absorption boundary layer. The implementations of this simulation show that the formula is correct and for the transversely isotropic(TI)media of any angular symmetry axis, when the thickness of the PML layer reaches a certain value, the seismic wave reflection effect generated by the artificial boundary can be well suppressed, and the absorption effect of PML is not subject to changes in incident angle and wave frequency. Therefore, the results of our study indicate that our research method can be used to simulate the propagation process of seismic waves in the transversely isotropic(TI)media without being affected by the reflected waves at the model boundary to restore the actual formation information and more valuable geological research. 相似文献
19.
将弹性波方程变换至Hamilton体系,构造适用于弹性波模拟的高效显式二阶辛Runge-Kutta-Nystrm(RKN)格式,运用根数理论得到此格式的阶条件方程组.通过给定系数的限定条件,得到方程的对称解.为了使时间离散误差达到极小,提出数值频率与真实频率比较,通过Taylor展开,得到关于辛系数的限定方程,求解方程组得到最小频散辛RKN格式.对比分析时间演进方程的稳定性,得到使库朗数达到极大值的限定方程,求解方程组得到最稳定辛RKN格式.发现此两种格式为同一格式.新得到的辛RKN格式不依赖于空间离散方法,为了对比的需要,选取有限差分法进行空间离散.在频散、稳定性分析中,与常见辛格式对比,从理论上分析了本文提出的格式在数值频散压制、稳定性提升等方面的优势,数值实验进一步证实了理论分析的正确性. 相似文献
20.
Forward modeling of elastic wave propagation in porous media has great importance for understanding and interpreting the influences of rock properties on characteristics of seismic wavefield. However,the finite-difference forward-modeling method is usually implemented with global spatial grid-size and time-step; it consumes large amounts of computational cost when small-scaled oil/gas-bearing structures or large velocity-contrast exist underground. To overcome this handicap,combined with variable grid-size and time-step,this paper developed a staggered-grid finite-difference scheme for elastic wave modeling in porous media. Variable finite-difference coefficients and wavefield interpolation were used to realize the transition of wave propagation between regions of different grid-size. The accuracy and efficiency of the algorithm were shown by numerical examples. The proposed method is advanced with low computational cost in elastic wave simulation for heterogeneous oil/gas reservoirs. 相似文献