共查询到20条相似文献，搜索用时 31 毫秒
1.
多阶边坡除了最危险滑面需要关注,每级台阶的潜在滑面及其他不满足规范要求的滑面亦需要得到重视。以双台阶边坡和复杂多台阶边坡为例,基于应变软化理论,利用FLAC3D软件分析边坡的剪应变发展规律,根据剪应变的集中带获取边坡的多个潜在滑面。分析滑面的剪入、剪出和滑面中部点的强度参数变化规律,并结合矢量和法分析滑面在应变软化过程中安全系数的演化规律。研究结果表明：采用该方法可获取边坡的最危险滑面及次级滑动面;随着软化的发展,滑面上点的强度参数从峰值强度逐渐降低至残余强度,然而演化的速度不同;随着应变软化过程的发展,所有滑面的安全系数均逐渐降低,最后趋于一个定值。 相似文献
2.
提出了一套基于随机响应面法的边坡系统可靠度分析方法。该方法首先从大量潜在滑动面中筛选出代表性滑动面。针对每条代表性滑动面,采用Hermite多项式展开建立其安全系数与土体参数间的非线性显式函数关系（即随机响应面）。然后,采用直接蒙特卡洛模拟计算边坡系统失效概率。在蒙特卡罗模拟中,采用所有代表性滑动面的随机响应面计算每一组样本所对应的边坡最小安全系数。最后,以两个典型多层边坡系统可靠度问题为例验证了该方法的有效性。结果表明：文中提出的边坡系统可靠度分析方法能够有效地识别边坡代表性滑动面,具有较高的计算精度和效率,并且确定代表性滑动面时无需计算滑动面间的相关系数。同时该方法可以有效地计算低失效概率水平的边坡系统可靠度,为含相关非正态参数的边坡系统可靠度问题提供了一条有效的分析途径。此外,多层边坡可能同时存在多条潜在滑动面,基于单一滑动面（如临界确定性滑动面）或者部分代表性滑动面进行边坡系统可靠度分析均会低估边坡失效概率。 相似文献
3.
The effects of method of generating circular slip surfaces on determining the critical slip surface by particle swarm optimization 总被引：1，自引：0，他引：1
R. Kalatehjari N. Ali M. Kholghifard M. Hajihassani 《Arabian Journal of Geosciences》2014,7(4):1529-1539
The main objectives of slope stability analysis are evaluating factor of safety for a given slip surface and determining the critical slip surface for a given slope. Factor of safety is usually calculated by limit equilibrium method. The main steps to determine the critical slip surface are generating trial slip surfaces as probable solutions and searching among them to determine the one with the lowest factor of safety. Although the process of searching the critical slip surface received much attention between researchers, the significance of method of generating slip surfaces is seldom addressed in the literature. The authors believe that this ignorance can affect the accuracy of the results of slope stability analysis even in the simplest problems with circular slip surfaces. Consequently, this paper focused on the method of generating circular trial slip surfaces as the simplest mechanism of sliding and considered its effect on determining the critical slip surface. A new method of generating circular slip surface was presented, which is more efficient and less restricted than the conventional method. A computer program was also developed to determine the critical slip surface of slopes by using particle swarm optimization. The performances of the proposed method and developed computer program were verified during comparative studies and sensitivity analysis. Based on the results, the effect of method of generating circular slip surfaces on determining the critical slip surface was confirmed successfully. In all considered problems, the proposed method of generating circular slip surfaces led to the lower values of factor of safety compare with the conventional method. 相似文献
4.
基于力平衡的三维边坡安全系数显式解及工程应用 总被引：9，自引：2，他引：7
将基于滑面正应力分布的二维极限平衡显式解法推广到三维边坡稳定性分析,提出适合一般形状空间滑面的三维边坡稳定性简便计算方法。首先,假设三维滑面正应力的初始分布,然后对其修正,使滑体满足所有力的平衡条件,导出关于安全系数的2次代数方程,最终得到三维边坡安全系数显式解。该方法克服了目前条柱法存在的一些难以解决的困难,不需要考虑条柱间作用力具体分布,满足主要平衡条件,计算过程简单。算例表明,该显式解与楔体三维极限平衡解析解完全一致,与对称三维边坡严格极限平衡解答接近。该方法已用于某重力坝坝肩三维滑体初步稳定性分析,计算结果有助于坝肩边坡的加固设计。 相似文献
5.
R. Baker 《国际地质力学数值与分析法杂志》1980,4(4):333-359
The analysis of the stability of slopes using limiting equilibrium considerations necessitates the determination of the critical slip surface which yields the minimal factor of safety. The numerous methods currently available for slope stability analysis provide a procedure for assigning a factor of safety to a given slip surface, but do not consider the problem of identifying the critical conditions. This paper presents an effective minimization procedure based on dynamic programming by which the minimal factor of safety, and the corresponding surface, are determined simultaneously. This procedure SSDP (Slope Stability by Dynamic Programming), couples the minimization scheme with Spencer's method of slope stability analysis. It may be applied to slopes of any geometry, layering, pore pressure and external load distributions. No arbitrary restrictions are placed on the shape of the slip surfaces, and the analysis satisfies all equilibrium equations. Application of the procedure to slope stability problems reported in the literature shows that for a given slip surface the procedure yields factors of safety which are almost identical to those reported, but in every case a more critical slip surface, with a lower factor of safety, may be found. 相似文献
6.
安全系数的计算和临界滑动面的确定是边坡稳定性分析的两个组成部分,强度折减法可以得到合理的安全系数,但却不能准确刻画临界滑动面的位置。基于对滑动现象的认识,提出了一种基于位移场分析的临界滑动面确定方法,认为当边坡处于临界状态时,其潜在滑动面附近的位移等值线最为密集,潜在滑动面上的点往往是在深度方向上沿垂直滑面的位移变化率达到最大值的位置。将本文方法与Spencer法、岩质边坡模型试验进行了对比,验证了该方法在曲线和折线滑动面搜索方面的适用性和可靠性。同时,探讨了单元形状、疏密程度、离散点间距等因素对滑动面的影响。 相似文献
7.
提出一种基于有限元计算的边坡三维滑裂面搜索的方法,根据有限元计算的应力结果,计算可能滑裂面的安全系数,然后用遗传算法搜索出最危险滑裂面,并得出相应的安全系数作为边坡的安全度评价指标。该方法的优越性是只需进行一次有限元计算,不需要假定滑裂面,可以用于具有复杂地貌和地质构造的三维边坡。通过算例,验证该方法的可行性和程序的正确性,以大岗山水电站库区边坡工程实例验证该方法的实用性。 相似文献
8.
公路沿线发生的滑坡、泥石流等自然灾害是造成交通停滞的主要原因。对公路沿线边坡进行稳定性评价及滑坡灾害分析对于公路管理和灾害防治具有重要意义。为了能对大范围边坡应用三维力学模型进行稳定性评价,研究中将较大研究区域划分为多个边坡单元（slope unit）,并介绍了边坡单元划分方法。对每个边坡单元,采用随机生成许多假想滑动面并通过一个基于GIS的边坡稳定性三维分析模型计算其安全系数的方法,找出具有最小安全系数的危险滑动面,同时求出在试算过程中安全系数小于某临界值（通常设为1.0）的结果出现的比率,作为该边坡单元的滑坡发生概率,以此作为指标对研究区域进行危险度评价。通过对日本49号国道沿线边坡中的应用对该方法的实用性进行了验证。 相似文献
9.
In general, the determination of the factor of safety and the location of the critical slip surface are two major challenges in seismic slope stability analysis. In this paper, a new approach for determining the factor of safety and the corresponding critical slip surface of a layered rock slope subjected to seismic excitations is presented, through a case study based on the combination of the shear strength reduction technique and distinct element method. According to this proposed method, the seismic factor of safety and the critical slip surface of the slope are estimated and compared with those obtained by the pseudo-static approach, combined with the limit equilibrium method. It is found that the factor of safety obtained from the proposed method is slightly greater than that computed by the pseudo-static analysis, with a difference of 4.2%, and that the critical slip surface obtained from the two methods is identical, which confirms the reasonability and feasibility of the proposed method. 相似文献
10.
破坏面确定是边坡稳定性分析的基础,存在各级滑动面。不同结构类型边坡,其确定方法也随之不同。对于反倾软岩边坡,不能通过不连续面空间展布分析确定其破坏面。联合FLAC3D和极限平衡方法分析具有节理块体切割破坏模式的某反倾页岩边坡稳定性。在野外调查基础上分析边坡的变形破坏机制,应用FLAC3D研究其应力、应变等值线及相应增量等值线图确定边坡潜在最危险滑动面和次级滑动面,计算其稳定性系数。在防护设计中考虑次级滑动面,针对边坡危险区域分析其防护效果。应用强度折减计算两危险区域稳定性系数,表明防护后边坡整体稳定性较好。该方法对反倾软岩边坡的稳定性分析有一定的借鉴价值,在防护设计中考虑次级滑动面的影响具有一定的实际指导意义。 相似文献
11.
基于矢量和分析方法的边坡滑面搜索 总被引：8，自引：3，他引：5
基于力是矢量这个基本概念,给出了边坡矢量和法安全系数的矢量表达式。在边坡荷载已知的情况下,运用有限元法计算得到边坡真实的应力分布状态,使用矢量和法安全系数并采用优化算法中的直接法搜索边坡的临界滑面。计算结果表明,使用矢量和分析法搜索得到的临界滑面位置与极限平衡法得到的滑面位置基本吻合,且安全系数相对误差最大为2.09 %,验证了该方法在边坡稳定分析中的合理性与可靠性。矢量和分析方法与基于强度储备安全系数的分析方法不同,具有明确的物理和力学意义,且不需引入过多假设,公式简洁,易于进行三维边坡稳定分析,不需进行迭代计算,可在工程实际中得到广泛的运用。 相似文献
12.
在边坡稳定性分析中,滑面搜索方法对于得到边坡的稳定性系数至关重要。现今两种常用的边坡稳定性分析方法,极限平衡法以及强度折减法,可以得到极限应力状态下边坡的潜在滑面。而为了评价边坡在当前应力场下的稳定性,提出一种基于聚类分析概念的滑面搜索方法。这种方法综合考虑了边坡各点的位移以及点安全系数,采用K均值聚类法将具有相近性质的点进行分类,把边坡体分为潜在危险区以及稳定区。潜在危险区的边界即为边坡在当前应力状态下的潜在滑面,并运用矢量和方法计算得到其稳定性系数。采用上述方法对3个算例进行验算,并与极限平衡法以及强度折减法进行对比。结果表明：（1）基于聚类分析的边坡稳定性评价方法具有较好的合理性和可靠性;（2）当边坡处于临界状态附近,通过聚类分析得到的潜在滑面与其他两种方法得到的滑面基本一致;当边坡处于较稳定状态时,当前应力状态下的潜在滑面要比强度折减法得到的滑动带范围要更深更广,但求出的稳定性系数也较高;当存在软弱夹层时,矢量和计算出的滑面更为陡峻,稳定性系数比其他两种方法的结果要小。 相似文献
13.
边坡最危险滑动面的搜索方法一直是研究的热点,但边坡内部次级滑动面也可能不满足安全设计要求,因此,考虑边坡多条滑动面的分析方法亦应得到关注。在传统强度折减法中,对边坡整个区域的抗剪强度参数进行折减,此方法仅可得到一个临界滑动面和最小安全系数。提出了一种基于局部强度折减法的多滑面分析方法,即首先定义单元安全系数的概念,并且计算边坡每个单元的安全系数,然后自动搜索出单元安全系数处于不同范围内的单元集合,对各个单元集合的强度参数进行折减计算,即可得到不同安全系数对应的滑动面。通过单台阶和双台阶边坡算例验证了该方法的可行性,结果表明,随着安全系数的增大,潜在滑面的深度和潜在滑动区域亦增大。最后把该方法应用到某隧道进口仰坡的稳定性评价中, 通过该方法得到的多级滑动面与现场监测数据吻合较好。 相似文献
14.
Finding the critical slip surface and estimating the landslide volume are of primary importance for slope seismic design. However, this may be difficult due to the uncertainty of ground motions. To address this problem, a new method for calculating uncertainties is recommended in this paper, especially for the critical slip surface and landslide volume under random earthquake ground motions. Firstly, a series of intensity–frequency nonstationary random earthquake ground motions were generated based on an improved orthogonal expansion method. A given number of potential slip surfaces were set in a soil slope. Subsequently, the factor of safety (FOS) of each slip surface for all ground motions was calculated and the minimum FOS curves were obtained. It was found that the critical slip surfaces and failure times are uncertain under different earthquakes. The Monte Carlo method was used to verify the accuracy of probability density evolution method (PDEM), and the results of the PDEM and the Monte Carlo method are consistent, meaning that the PEDM has higher computational efficiency. Moreover, the distributions of earthquake-triggered landslide volume and landslide depth were analyzed by considering equivalent extreme events. Both landslide volume and depth exhibit a normal distribution for a homogeneous soil slope. The framework of this study is meaningful for slope seismic design in engineering, for example, the location of critical slip surface can be used for slope reinforcement, and the distribution of sliding volume can be used for disaster assessment. 相似文献
15.
填筑和开挖边坡的稳定性分析 总被引：1，自引：0，他引：1
在有限元应力应变分析的基础上,采用以剪应力定义的安全系数和模式搜索的方法确定边坡的安全系数及最危险滑动面。在平面应变条件下,对土层均质的填筑和开挖边坡的稳定性进行了较为全面的研究,并同天然边坡的安全系数和破坏面进行比较,计算结果表明,这3类边坡滑动面的形状基本一致,天然边坡安全系数要高于填筑和开挖边坡;同时比较了采用有限元稳定评价方法和采用极限平衡方法计算结果的差别;最后分析研究了计算参数变化对填筑和开挖边坡稳定性的影响。 相似文献
16.
降雨入渗过程中孔隙水压力的升高与基质吸力的降低引起边坡稳定性的下降,是导致边坡滑塌的主要诱导因素。利用饱和-非饱和渗流有限元计算得到的孔隙水压力场,基于Fredlund提出的非饱和土抗剪强度理论,对边坡临界滑动场进行改进,提出可以考虑降雨过程的边坡临界滑动场数值模拟方法,能够方便、快速地计算出边坡局部、整体安全系数和相对应的临界滑动面在降雨过程中的变化历程。将该法用于一个典型均质边坡和一个非均质边坡在降雨过程中的稳定性计算,分析降雨持续时间、降雨强度和非饱和强度参数取值等因素对边坡稳定性的影响,并将计算结果与其他方法进行比较,结果表明临界滑动场方法能搜索任意形状最危险滑面,计算的安全系数合理。 相似文献
17.
基于Hoek—Brown非线性经验强度准则和简化Bishop法，导出了节理破碎岩体边坡新的稳定性系数计算公式。通过在简单遗传算法（SGA）中引人适应度变换技术改进其收敛性能，提出了节理破碎岩体边坡稳定性分析和最危险滑动面搜索的自适应遗传算法（AGA）。算例计算结果表明：（1）AGA能准确地搜索到边坡全局最小稳定系数及其对应的临界滑动面；（2）AGA计算效率和数值稳定性均比SGA和随机投点法有较大提高；（3）采用不同的适应度变换函数均可提高计算效率。为简便起见，推荐采用线性变换函数。 相似文献
18.
Stability of an embankment constructed on soft consolidating soil improved with pre-fabricated vertical drains is investigated. The factor of safety of the embankment is obtained at various time intervals from the end of construction till the end of consolidation in order to check the embankment stability. Finite element method is used to obtain the effective stresses at required points in soil at various time intervals. Critical slip surface is obtained using two methods. In the first method, the critical slip surface is assumed as an arc of a circle selected among various probable slip circles with minimum factor of safety whereas, in the second method, a random walking type Monte Carlo technique is used to predict the critical slip surface. The effects of providing vertical drains on stability of an embankment is investigated by comparing the factor of safety of slope with vertical drains to the factor of safety of slope without vertical drains. It is concluded from the study that the installation of vertical drains enhances the factor of safety of the embankment from the end of construction till the end of consolidation. 相似文献
19.
数值分析方法（有限元、有限差分等）可计算边坡应力、变形和破坏,但直接计算边坡安全系数比较困难;而极限平衡法需对边坡体内力作出假设,计算精度受到限制。利用数值分析方法计算得到的应力场,重新定义推力最大原理中推力的含义,将常规边坡临界滑动场数值模拟方法作进一步的改进,提出基于数值应力场的边坡临界滑动场方法。该方法可充分发挥两大方法的优势,能够准确、方便地搜索出边坡临界滑动面位置,并给出更合理的边坡安全系数。通过两个算例的稳定性分析,并与其他方法进行比较,验证了该方法的准确性和合理性。 相似文献
20.
滑带土抗剪强度参数的三维反分析 总被引：2，自引：0，他引：2
以滑面正应力修正模式的三维边坡稳定性分析方法为基础,建立了确定滑带土抗剪强度参数的三维反分析模型。先对滑坡体的稳定性进行调查评估,确定滑坡的安全系数与三维滑面的几何尺寸;然后,通过对滑面正应力进行合理假定与修正,建立了平衡方程,以强度参数为未知数,利用数学方法并结合试验、经验等手段求解出抗剪强度参数。该模型克服了二维反分析将会高估滑带土的抗剪强度参数的缺陷,而且计算过程简单,易于编程实现。两个简单算例表明,三维反分析模型可以考虑三维滑体的空间效应,得到的抗剪强度参数更真实、更符合实际情况,为滑坡治理提供参考。 相似文献