首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Changes in vegetation cover within dune fields can play a major role in how dune fields evolve. To better understand the linkage between dune field evolution and interdune vegetation changes, we modified Werner's (Geology, 23, 1995: 1107–1110) dune field evolution model to account for the stabilizing effects of vegetation. Model results indicate that changes in the density of interdune vegetation strongly influence subsequent trends in the height and area of eolian dunes. We applied the model to interpreting the recent evolution of Jockey's Ridge, North Carolina, where repeat LiDAR surveys and historical aerial photographs and maps provide an unusually detailed record of recent dune field evolution. In the absence of interdune vegetation, the model predicts that dunes at Jockey's Ridge evolve towards taller, more closely‐spaced, barchanoid dunes, with smaller dunes generally migrating faster than larger dunes. Conversely, the establishment of interdune vegetation causes dunes to evolve towards shorter, more widely‐spaced, parabolic forms. These results provide a basis for understanding the increase in dune height at Jockey's Ridge during the early part of the twentieth century, when interdune vegetation was sparse, followed by the decrease in dune height and establishment of parabolic forms from 1953‐present when interdune vegetation density increased. These results provide a conceptual model that may be applicable at other sites with increasing interdune vegetation cover, and they illustrate the power of using numerical modeling to model decadal variations in eolian dune field evolution. We also describe model results designed to test the relative efficacy of alternative strategies for mitigating dune migration and deflation. Installing sand‐trapping fences and/or promoting vegetation growth on the stoss sides of dunes are found to be the most effective strategies for limiting dune advance, but these strategies must be weighed against the desire of many park visitors to maintain the natural state of the dunes. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

2.
Longitudinal dunes are the most widespread dune types in the world sand seas but comprehensive study on the sand surface stability is scarce. The southern part of Gürbantünggüt Desert is mainly covered by longitudinal dune in which fixed and semi-fixed dunes occupy over 80% of the total area. Systematic analysis on the climatic conditions, the soil moisture and vegetation distributions, and the sand surface activities showed that the fixed and semi-fixed dunes are in a comprehensive low-energy wind environment. Snow cover and frozen soil provide a good protection to the ground surface in winter. The temporal distribution of precipitation and corresponding variation of temperature create a favorable condition for the desert plants growth, especially for the ephemeral plants. The occurrence of effective winds for sand moving in April to June coincides with the stage of relatively wet sand surface and good vegetation cover, which effectively keep the sand surface stable at the interdune and the plinth of the dunes. Activity sand surface appears only at the crest and the upper part of the sand dunes.  相似文献   

3.
The Nyírség is the second largest alluvial fan in Hungary covered by fixed sand dunes. The primary aim of the paper is to describe the morphology of dunes in the region and classify them based on their morphometric characteristics. The other major aim is to select those dunes which were exposed to significant anthropogenic impact, and to determine the spatial and temporal differences in the intensity of human activity. The following dune types were separated: valley‐marginal, transitional valley‐marginal, transitional parabolic, filled, partially and unfilled parabolic dunes. After defining different dune types and their parameters, certain dunes were selected based on exposure to significant anthropogenic impact. Definite connection was demonstrated between the intensity of human environmental impact and the rate of erosion on fixed sand dunes. The erosion of sand dunes was most intensive in Medieval times, most likely due to concentration of agricultural land use. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

4.
Embryo dunes are often ephemeral, but can develop to become established coastal foredunes. In 2001 a patch of embryo dunes 13.11 m2 appeared on a beach in north Lincolnshire, UK and had expanded to over 3600 m2 by 2011. The rate of expansion is linked to storm occurrence, where expansion is slowed during years with a higher incidence of storm surges. From July 2009–October 2010 seasonal changes in dune field topography were determined using terrestrial laser scanning (TLS) data. Vegetation is important in the development of embryo dunes, but can cause errors in TLS data. Tests evaluating the impact of vegetation on the TLS data suggest the minimum elevation value from the TLS point cloud within a 0.05 m grid cell gives a good approximation of the ground surface. Digital elevation models (DEMs) of the dunes constructed using filtered data showed the embryo dunes underwent a classic seasonal cycle of erosion during the winter and accretion during the summer. For example from October 2009 to April 2010 over 375 m3 of sediment was eroded from the dunes whereas during spring and summer 2010 the dune field gained over 600 m3 of sand. The overall magnitude of change in dune height and volume from season to season exceeded the errors associated with the construction of the DEM from the TLS data and the vegetation filtering process, which suggests TLS can be useful for documenting topographic change in vegetated dunes. After 10 years, the patch of embryo dunes is still expanding but has not yet merged with more established foredunes to landward. Aeolian process measurements indicate that, at present, the embryo dunes do not prevent sand from reaching the foredunes, however the rate of foredune progradation has slowed concurrently with the expansion of the embryo dune field. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

5.
The evolution of barchan-to-parabolic dunes can be driven by vegetation establishment, which may be linked to climate change and/or human activity. However, little is known of the impact of changes in wind strength on vegetation development and the resulting impacts on the evolution of dune morphology and sedimentological characteristics. To address this issue, we studied the morphology and grain-size characteristics of barchan, barchan-to-parabolic and parabolic dunes in the Mu Us Desert in north China, which was combined with an analysis of changes in normalized difference vegetation index (NDVI) and climatic variables during 1982–2018. The results reveal a trend of increasing growing-season NDVI which was related to a significant decrease in drift potential (DP). Therefore, we suggest that the initiation of dune transformation was caused by the reduced wind strength which favored the establishment and development of vegetation. To reveal the response of sedimentological reorganization during the processes of dune transformation, grain-size characteristics along the longitudinal profile of the three different types of dunes were examined. The decreasing wind strength led to the transport of fine sands on the upper part of the windward face of the dunes, resulting in a progressive coarsening of the grain-size distribution (GSD) and a reduction in dune height at the crest area. No distinct trend in sorting and mean grain-size was observed on the windward slope of the barchan-to-parabolic dune, indicating that the sand in transit had little influence on the GSD. Conversely, progressive sorting and coarsening of the sand occurred towards the crest of the parabolic dune. This indicates that vegetation development limited the transport of sand from upwind of the dune, and affected a shift in the dune source material to the underlying source deposits, or to reworked pre-existing aeolian deposits, and resulted in the trapping of sand in the crest area. © 2020 John Wiley & Sons, Ltd.  相似文献   

6.
The dune system in Otindag sand field of northern China is sensitive to climate change, where effective moisture and related vegetation cover play a controlling role for dune activity and stability. Therefore, aeolian deposits may be an archive of past environmental changes, possibly at the millennial scale, but previous studies on this topic have rarely been reported. In this study, thirty-five optically stimulated luminescence (OSL) ages of ten representative sand-paleosol profiles in Otindag sand field are ob-tained, and these ages provide a relatively complete and well-dated chronology for wet and dry varia-tions in Holocene. The results indicate that widespread dune mobilization occurred from 9.9 to 8.2 ka, suggesting a dry early Holocene climate. The dunes were mainly stabilized between 8.0 and 2.7 ka, implying a relatively wet climate, although there were short-term penetrations of dune activity during this wet period. After ~2.3 ka, the region became dry again, as inferred from widespread dune activity. The "8.2 ka" cold event and the Little Ice Age climatic deterioration are detected on the basis of the dune records and OSL ages. During the Medieval Warm Period and the Sui-Tang Warm Period (570-770 AD), climate in Otindag sand field was relatively humid and the vegetation was denser, and the sand dunes were stabilized again. These aeolian records may indicate climate changes at millennial time scale during Holocene, and these climatic changes may be the teleconnection to the climate changes elsewhere in the world.  相似文献   

7.
Subaqueous dunes are often observed to be superimposed on larger dunes, sand bars and tidal ridges, while smaller dunes may also be found superimposed on larger dunes. In this study an automated method has been developed by which the geometry of superimposed rhythmic bedforms can be analysed. The method combines two-dimensional (2D) Fourier analysis, wavelet transform, zero-crossing analysis and a variety of filters. Instead of applying conventional manual procedures, the wavelength of interest can be automatically determined by a series of 2D Fourier analyses, which is a critical first step for automated analysis of dune geometries. Based on such efficient data preprocessing, the method can accurately determine dune orientation, separate target bedform profiles, and identify crests and troughs. With the input of bathymetry, the dominant regional dune orientation can be determined together with the geometric parameters of individual dunes (wavelength, height, leeside angles) and their spatial distribution. The method was applied to both synthetic and observed bathymetries of a tidal ridge off the Jiangsu coast, China, and a sand bank in the Dover Strait, UK. The results show that almost all dunes in the domain were detected and their geometric parameters accurately calculated, especially in areas of bedform superimposition. © 2020 John Wiley & Sons, Ltd.  相似文献   

8.
Tidal sand dune dynamics is observed for two tidal cycles in the Arcachon tidal inlet, southwest France. An array of instruments is deployed to measure bathymetric and current variations along dune profiles. Based on the measurements, dune crest horizontal and vertical displacements are quantified and show important dynamics in phase with tidal currents. We observed superimposed ripples on the dune stoss side and front, migrating and changing polarity as tidal currents reverse. A 2D RANS numerical model is used to simulate the morphodynamic evolution of a flat non-cohesive sand bed submitted to a tidal current. The model reproduces the bed evolution until a field of sand bedforms is obtained that are comparable with observed superimposed ripples in terms of geometrical dimensions and dynamics. The model is then applied to simulate the dynamics of a field of large sand dunes of similar size as the dunes observed in situ. In both cases, simulation results compare well with measurements qualitatively and quantitatively. This research allows for a better understanding of tidal sand dune and superimposed ripple morphodynamics and opens new perspectives for the use of numerical models to predict their evolution.  相似文献   

9.
Controlling desertification is an important ecological target for the Qinghai-Tibet Plateau of China, where studies on impacts of vegetation restoration measures on sandy soil improvement are still lacking. The Mugetan Desert in Guinan County, Qinghai Province, northeastern Qinghai-Tibet Plateau is a repre-sentative ecological restoration area. The impacts of artificial vegetation on the ecological restoration and its properties are studied by using field investigation and sample testing including contents of the surface layer and the vegetation composition of movable, semi-fixed, and fixed sand dunes. Results demonstrate that the moss crust has formed on the surface of a sand dune which has become fixed after 30 years under the impact of artificial vegetation (i.e. Cathay poplar). Meanwhile, the clay minerals, organic matter, and other soil available nutrients have markedly increased. A correlation has been found between these materials, i.e., clay minerals and organic matter content increasing with silt and clay increases with reduction in sand content. In addition, soil nutrient were positively correlated with the increase of plant diversity.Under the current meteorological conditions, the artificial vegetation is helpful for the stabili-zation of sand dune and the ecological restoration in the Mugetan Desert.  相似文献   

10.
Parabolic dunes are widely distributed on coasts and margins of deserts and steppes where ecosystems are vulnerable and sensitive to environmental changes and human disturbances. Some studies have indicated that vegetated parabolic dunes can be activated into highly mobile barchan dunes and the catastrophic shift of eco‐geomorphic systems is detrimental to land management and social‐economic development; however, no detailed study has clarified the physical processes and eco‐geomorphic interactions that control the stability of a parabolic dune and its resistance to unfavorable environmental changes. This study utilizes the Extended‐DECAL (Discrete Eco‐geomorphic Aeolian Landscapes) model, parameterized by field measurements of dune topography and vegetation characteristics combined with remote sensing, to explore how increases in drought stress, wind strength, and grazing stress may lead to the activation of stabilizing parabolic dunes into highly mobile barchans. The modeling results suggest that the mobility of an initial parabolic dune at the onset of a perturbation determines the capacity of a system to absorb environmental change, and a slight increase in vegetation cover of an initial parabolic dune can increase the activation threshold significantly. The characteristics of four eco‐geomorphic interaction zones control the processes and resulting morphologies of the transformations. A higher deposition tolerance of vegetation increases the activation threshold of the dune transformation under both a negative climatic impact and an increased sand transport rate, whereas the erosion tolerance of vegetation influences the patterns of resulting barchans (a single barchan versus multiple barchans). The change in the characteristics of eco‐geomorphic interaction zones may indirectly reflect the dune stability and predict an ongoing transformation, whilst the activation angle may be potentially used as a proxy of environmental stresses. In contrast to the natural environmental changes that tend to affect relatively weak and young plants, grazing stress can exert a broader impact on any plant indistinctively. A small increase in grazing stress just above the activation threshold can accelerate dune activation significantly. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

11.
Concepts derived from previous studies of offshore winds on natural dunes are evaluated on a dune maintained for shore protection during three offshore wind events. The potential for offshore winds to form a lee‐side eddy on the backshore or transfer sediment from the dune and berm crest to the water are evaluated, as are differences in wind speed and sediment transport on the dune crest, berm crest and a pedestrian access gap. The dune is 18–20 m wide near the base and has a crest 4.5 m above backshore elevation. Two sand‐trapping fences facilitate accretion. Data were obtained from wind vanes on the crest and lee of the dune and anemometers and sand traps placed across the dune, on the beach berm crest and in the access gap. Mean wind direction above the dune crest varied from 11 to 3 deg from shore normal. No persistent recirculation eddy occurred on the 12 deg seaward slope. Wind speed on the berm crest was 85–89% of speed at the dune crest, but rates of sediment transport were 2.27 times greater during the strongest winds, indicating that a wide beach overcomes the transport limitation of a dune barrier. Limited transport on the seaward dune ramp indicates that losses to the water are mostly from the backshore, not the dune. The seaward slope gains sand from the landward slope and dune crest. Sand fences causing accretion on the dune ramp during onshore winds lower the seaward slope and reduce the likelihood of detached flows during offshore winds. Transport rates are higher in access gaps than on the dune crest despite lower wind speeds because of flatter slopes and absence of vegetation. Transport rates across dunes and through gaps can be reduced using vegetation and raised walkover structures. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

12.
Sand dunes as potential sources of dust in northern China   总被引：1，自引：0，他引：1  
While saltation bombardment of sand grains on a fine substrate can produce considerable dust, the well-sorted nature of sand dunes tends to preclude them from consideration as major dust sources. Recent research, however, has revealed that sand dunes can, in some cases, be large sources of dust. We used the PI-SWERL(Portable In-Situ Wind Erosion Laboratory) to measure in the field the potential of sand dunes and other desert landforms to emit particulate matter 10 μm(PM-10) dust in the Tengger, Ulan Buh, and Mu Us deserts of northern China. Combined with high resolution particle size measurements of the dune sand, an assessment of sand dunes as a dust source can be made. Large active transverse dunes tend to contain little to no stored PM-10, yet they produce a low dust flux. Coppice dunes stabilized by vegetation contain appreciable PM-10 and have very high dust emission potential. There is a positive correlation between the amount of PM-10 stored in a dune and its potential dust flux. Saltation liberates loose fines stored in dunes, making them very efficient dust emitters compared to landforms such as dry lake beds and washes where dust particles are unavailable for aeolian transport due to protective crusts or sediment cohesion. In cases where large dunes do not store PM-10 yet emit dust when active, two hypotheses can be considered:(1) iron-oxide grain coatings are removed during saltation, creating dust, and(2) sand grains collide during saltation, abrading grains to create dust. Observations reveal that iron oxide coatings are present on some dune sands. PI-SWERL data suggests that low dust fluxes from dunes containing no stored dust may represent an estimate for the amount of PM-10 dust produced by removal of iron oxide coatings. These results are similar to results from dunes in the United States. In addition, PI-SWERL results suggest that dust-bearing coppice dunes, which cover vast areas of China's sandy deserts, may become major sources of dust in the future if overgrazing, depletion of groundwater, or drought destabilizes the vegetation that now partially covers these dunes.  相似文献   

13.
Vegetation plays an important role in shaping the morphology of aeolian dune landscapes in coastal and semi‐arid environments, where ecogeomorphic interactions are complex and not well quantified. We present a Discrete ECogeomorphic Aeolian Landscape model (DECAL) capable of simulating realistic looking vegetated dune forms, permitting exploration of relationships between ecological and morphological processes at different temporal and spatial scales. The cellular automaton algorithm applies three simple rules that lead to self‐organization of complex dune environments, including nebkhas with distinctive deposition tails that form in association with mesquite‐type shrubs, and hairpin (long‐walled) parabolic dunes with trailing ridges that evolve from blowouts in association with vegetation succession. Changing the conditions of simulations produces differing landscapes that conform qualitatively to observations of real‐world dunes. The model mimics the response of the morphology to changes in sediment supply, vegetation distribution, density and growth characteristics, as well as initial disturbances. The introduction of vegetation into the model links spatial and temporal scales, previously dimensionless in bare‐sand cellular automata. Grid resolutions coarser than the representative size of the modelled vegetation elements yield similar morphologies, but when cell size is reduced to much smaller dimensions, the resultant landscape evolution is dramatically different. The model furthermore demonstrates that the relative response characteristics of the multiple vegetation types and their mutual feedback with geomorphological processes impart a significant influence on landscape equilibria, suggesting that vegetation induces a characteristic length scale in aeolian environments. This simple vegetated dune model illustrates the power and versatility of a cellular automaton approach for exploring the effects of interactions between ecology and geomorphology in complex earth surface systems. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

14.
As with most dune fields, the White Sands Dune Field in New Mexico forms in a wind regime that is not unimodal. In this study, crescentic dune shape change (deformation) with migration at White Sands was explored in a time series of five LiDAR‐derived digital elevation models (DEMs) and compared to a record of wind direction and speed during the same period. For the study period of June 2007 to June 2010, 244 sand‐transporting wind events occurred and define a dominant wind mode from the SW and lesser modes from the NNW and SSE. Based upon difference maps and tracing of dune brinklines, overall dune behavior consists of crest‐normal migration to the NE, but also along‐crest migration of dune sinuosity and stoss superimposed dunes to the SE. The SW winds are transverse to dune orientations and cause most forward migration. The NNW winds cause along‐crest migration of dune sinuosity and stoss bedforms, as well as SE migration of NE‐trending dune terminations. The SSE winds cause ephemeral dune deformation, especially crestal slipface reversals. The dunes deform with migration because of differences in dune‐segment size, and differences in the lee‐face deposition rate as a function of the incidence angle between the wind direction and the local brinkline orientation. Each wind event deforms dune shape, this new shape then serves as the boundary condition for the next wind event. Shared incidence‐angle control on dune deformation and lee‐face stratification types allows for an idealized model for White Sands dunes. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

15.
The southwestern Kalahari linear dunefield, which displays marked morphological variability, possesses a partial but temporally and spatially variable vegetation cover and has frequently been described as a palaeodunefield. Palaeo status has been ascribed on the basis of several criteria including the presence of vegetation, but also because dunes are thought to be out of alignment with modern resultant potential sand-moving wind directions and because present-day wind energy is regarded as low. For the period 1960–1992, wind data from eight dunefield meteorological stations are analysed in detail to examine these assertions. Potential sand transport directions, including spatial and temporal variations, and potential drift directions for the windiest three month periods, are calculated and explained. It is concluded that the present-day potential sand transport environment is markedly variable from year to year and from place to place. While periods of low sand transport energy do occur, it is also noted that the 1980s possessed considerable potential for sand transport in the dunefield. Directional variability is also relatively high, perhaps exceeding that under which linear dunes can be expected to form. Because linear dune aeolian activity has a number of states, however, the present-day wind environment may allow dune surface aeolian activity to occur which does not alter the overall pattern of the dunes.  相似文献   

16.
The introduction of vegetation to bare barchan dunes can result in a morphological transformation to vegetated parabolic dunes. Models can mimic this planform inversion, but little is known about the specific processes and mechanisms responsible. Here we outline a minimalist, quantitative, and process‐based hypothesis to explain the barchan–parabolic transformation. The process is described in terms of variations in the stabilization of wind‐parallel cross‐sectional dune slices. We hypothesize that stabilization of individual ‘dune slices’ is the predictable result of feedbacks initiated from colonization of vegetation on the slipface, which can only occur when slipface deposition rates are less than the deposition tolerance of vegetation. Under a constant vegetation growth regime the transformation of a barchan dune into a parabolic dune is a geometric response to spanwise gradients in deposition rates. Initial vegetation colonization of barchan horns causes shear between the anchored sides and the advancing centre of the dune, which rotates the planform brinkline angle from concave‐ to convex‐downwind. This reduces slipface deposition rate and allows vegetation to expand inward from the arms to the dune centre. The planform inversion of bare barchans dunes into vegetated parabolic dunes ultimately leads to complete stabilization. Our hypothesis raises several important questions for future study: (i) are parabolic dunes transitional landforms between active and vegetation‐stabilized dune states? (ii) should stabilization modelling of parabolic dune fields be treated differently than linear dunes? and (iii) are stabilized parabolic dune fields ‘armoured’ against re‐activation? Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

17.
Lateral migration of linear dunes in the Strzelecki desert,Australia   总被引：1，自引：0，他引：1  
Linear dunes in the Strzelecki Desert trend roughly south-north. Sand transport, which is toward the NNE, has caused the dunes to migrate eastward while they extend or migrate northward. Eastward lateral migration is evidenced by: (1) asymmetrical shape of the dunes; east-facing slopes are several times as steep as west-facing slopes; (2) asymmetrical accumulation of loose recently transported sand (relatively abundant on east-facing slopes); (3) asymmetrical outcropping of older semiconsolidated aeolian sand on the dune surface (more abundant on west-facing slopes); and (4) east-dipping foreset beds that underly the west-facing flanks of some dunes. Dunes in the Strzelecki Desert are still active in the sense that sand is transported along and across many dune crests. However, the dunes are composed primarily of Pleistocene strata, indicating that the trend of the dunes was established before the Holocene. The obliquity of the dunes to the transport direction is not merely an aberration of the wind regime of the last few decades. Preferential accumulation of sand on east-facing flanks indicates that the dunes migrated eastward several metres during the Holocene. Moreover, the west-facing flanks of some dunes have experienced a minimum of tens of metres of erosion. This asymmetric erosion and deposition were caused by dune obliquity and lateral migration that may have begun as early as the Pleistocene. Dunes in the Strzelecki Desert and in the adjacent Simpson Desert display a variety of grossly different internal structures. Computer graphics experiments demonstrate that many of these differences in structure can be explained by different angles of climb of the dunes.  相似文献   

18.
Bonäsheden, Sweden's largest continuous dune field, situated in the county of Dalarna, central Sweden, has been investigated using LiDAR (light detection and ranging) remote sensing, ground penetrating radar as well as by field observations and luminescence dating. The use of LiDAR in conjunction with geographic information system (GIS) software proved to be efficient in mapping the inactive dune field and classifying the dune morphology, especially when slope raster images were used. The dunes have formed mostly by winds from the northwest (NW) and are of a transverse type. Still other dune types, such as parabolic dunes, and transverse dunes with a deviating orientation are present. Also, there seems to be different generations of dunes, suggesting a complex palaeowind environment with a change from predominantly north‐westerly winds to more westerly winds. Luminescence dating finally allows us to have an absolute chronology of the development of the Bonäsheden dune field, revealing formation of the dune field closely following the de‐glaciation of this part of Sweden (c. 10.5 ka). The well preserved transverse shape of the majority of the dunes suggests rapid stabilization by vegetation, although sand drift still seems to have been active on a noticeable scale for at least 1500 years and also, occasionally and patchy, as coversand deposition during the Late Holocene. A simple model is proposed for the dune field development of Bonäsheden based on our findings. This model is a useful addition since the majority of present day dune field models focus on the formation of parabolic dunes or large unvegetated dune fields. Our results suggest that most models cannot adequately simulate the formation of such small dune fields as that of Bonäsheden, with apparently rapidly fixated transverse dunes in a previously glaciated, now vegetated area. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

19.
Sunset Crater in north‐central Arizona (USA) is a 900‐year‐old scoria‐cone volcano. Wind action has redistributed its widespread tephra deposit into a variety of aeolian dune forms that serve as a terrestrial analog for similar landforms and aeolian processes on Mars. Fieldwork was conducted to collect essential geomorphological and sedimentological data, and to establish a baseline for the type and morphometry of dunes, physical properties, interactions with topography, and saltation pathways. Our analyses focused primarily on coppice dunes, falling dunes, wind ripples, and sand streaks. For all collected volcaniclastic aeolian sediment samples, the sand‐size fraction dominated, ranging from almost 100% sand to 74.6% sand. No sample contained more than 1.6% silt. The composition is overwhelmingly basaltic with non‐basaltic particles composing 2 to 6% of the total. Coppice (nebkha) dunes form where clumps of vegetation trap saltating particles and create small mounds or hummocks. Mean grain size for coppice dune samples is coarse sand. Measured dune height for 15 coppice dunes ranged from 0.3 to 3.3 m with a mean of 1 m. Mean length was 6.7 m and mean width was 4.8 m. Falling dunes identified in this study are poorly developed and thin, lacking a prominent ramp‐like structure. Mean wavelength for three sets of measured ripples ranged from 22 to 36 cm. Sand streaks extend downwind for more than a kilometer and are up to 200 m in width. They commonly occur on the lee side of mesas and similar landforms and are typically the downwind continuation of falling dunes. Falling dunes, wind ripples, and sand streaks have been identified on Mars, while coppice dunes are similar to Martian shadow or lee dunes in which sand accumulates in the lee of obstacles. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

20.
A cellular automata model is used to analyze the effects of groundwater levels and sediment supply on aeolian dune development occurring on sand flats close to inlets. The model considers, in a schematized and probabilistic way, aeolian transport processes, groundwater influence, vegetation development, and combined effects of waves and tides that can both erode and accrete the sand flat. Next to three idealized cases, a sand flat adjoining the barrier island of Texel, the Netherlands, was chosen as a case study. Elevation data from 18 annual LIDAR surveys was used to characterize sand flat and dune development. Additionally, a field survey was carried out to map the spatial variation in capillary fringe depth across the sand flat. Results show that for high groundwater situations, sediment supply became limited inducing formation of Coppice-like dunes, even though aeolian losses were regularly replenished by marine import during sand flat flooding. Long dune rows developed for high sediment supply scenarios which occurred for deep groundwater levels. Furthermore, a threshold depth appears to exist at which the groundwater level starts to affect dune development on the inlet sand flat. The threshold can vary spatially depending on external conditions such as topography. On sand flats close to inlets, groundwater is capable of introducing spatial variability in dune growth, which is consistent with dune development patterns found on the Texel sand flat.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号