共查询到20条相似文献，搜索用时 681 毫秒
1.
2.
高强度人类活动对泉州湾滨海湿地环境的影响及其对策 总被引：3，自引：2，他引：1
由于滨海湿地丰富的资源和优越的环境,人们对其进行了大规模的开发利用,导致了滨海湿地的丧失与生态退化。滨海湿地位于陆地-海洋-大气相互作用最活跃的地带,具有非常重要的生态意义。总结泉州湾滨海湿地水动力、地貌、生态、环境质量的特征,分析围填海、养殖、污染物排放及人工生态工程等对滨海湿地的影响。结果表明,随着社会经济的快速发展以及人类活动的显著增强,泉州湾滨海湿地面积减小,输水及输沙的路径和方式发生变化,湿地环境质量显著下降,生物多样性及生物量减少。为了实现泉州湾滨海湿地的可持续发展,提出了如下对策:(1)加强围海造地的科学管理,提倡新的围海造地方式;(2)开展海岸整治与生态修复,建设特色湿地公园;(3)挖掘海洋文化特色,发展生态旅游。本研究揭示高强度人类活动对滨海湿地环境的影响,为开展滨海湿地研究、整治与修复,为制定滨海湿地开发利用与保护对策提供科学依据。 相似文献
3.
4.
生境系统重要性和开发利用可行性是无居民海岛开发利用的重要依托。文章采用层次分析法与德尔菲法确定指标权重,针对研究区域特点,建立无居民海岛开发利用适宜性评价指标体系,在各因子分值量化处理后,定义相应指数,利用互斥矩阵定位无居民海岛开发适宜性类型分级。研究表明:长三角的生态屏障——九段沙岛,为低度适宜开发型海岛,无居民海岛开发利用适宜性评价指标体系适用于九段沙海岛。在开发利用方面,遵循可持续开展角度原则,九段沙应该保护和修复生境系统环境、从严把控开发强度、开展湿地保护。 相似文献
5.
为提高我国沿海滩涂的开发利用水平,促进经济社会和生态环境的协调可持续发展,文章在梳理相关定义和研究的基础上,探索沿海滩涂开发利用综合效益评价。研究结果表明:针对具有开发利用价值的潮间带和潮下带,其开发利用的综合效益为从全社会角度出发,以多项指标体现的,可识别和可量化的全部效益的总和;遵循科学性、系统性和统筹性原则,从资源利用、生态环境、经济增长和社会发展4个方面,选取自然岸线保有率等28项指标,建立评价指标体系,并采用递阶多层次综合评价模型计算综合评价值,从而评价沿海滩涂开发利用综合效益。 相似文献
6.
7.
8.
9.
天津近岸海域生态环境健康评价 总被引：3，自引：0，他引：3
以2004 - 2005年对天津市近岸海域海洋生态环境状况 4 次监测获得的资料为基础,利用"河口及海湾生态系统生态环境健康评价方法"对监测海域的海洋生态环境健康状况进行了评价.结果显示:除沉积物环境和生物残毒指标监测项目评价结果显示处于健康状态外,虽然水环境评价结果为健康,但部分海域水环境严重恶化,主要污染物为无机氮;海洋生物质量生物指标已处于亚健康状态的底线;栖息地环境为不健康,主要是由于滨海湿地的大量减少和大量海岸工程建设造成的.综合以上 5 类评价因子的评价结果最终判定:天津市近岸海域的生态环境处于亚健康状态,而且生态环境质量仍然存在着进一步恶化的趋势. 相似文献
10.
1976年以来江苏盐城滨海湿地景观变化及驱动力分析 总被引：5，自引：1，他引：4
基于1976年的地形测绘数据和1987,1992,1997,2002,2007年的遥感数据提取土地利用和景观的时空变化,进而分析近40 a来江苏盐城滨海湿地的景观变化和驱动力。研究表明:自1976年以来盐城滨海湿地中的自然湿地总面积呈逐渐减少的趋势;景观的主要变化特征表现为以獐茅、碱蓬群落为代表的自然湿地的大面积减少,和以鱼塘、农业用地为代表的人工湿地的大面积增加。景观指标分析表明盐城滨海湿地景观总体上有破碎化程度加剧的趋势。结果分析认为,这种变化既受到政策导向型的各类滩涂开发等人为干扰活动的影响,也受到滨海湿地自然演化和潮滩蚀淤等自然因素的影响。尽快改变盐城滨海湿地现有的开发利用模式,使各种人类活动对整个生态系统的压力减到最小,以获得经济、社会、生态效益的统一。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
20.