首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 859 毫秒
1.
Partial melting and reactive melt transport may change the composition, microstructures, and physical properties of mantle rocks. Here we explore the relations between deformation and reactive melt transport through detailed microstructural analysis and crystallographic orientation measurements in spinel peridotite xenoliths that sample the shallow lithospheric mantle beneath the southeastern rim of the Siberian craton. These xenoliths have coarse-grained, annealed microstructures and show petrographic and chemical evidence for variable degrees of reaction with silicate melts and fluids, notably Fe-enrichment and crystallization of metasomatic clinopyroxene (cpx). Olivine crystal preferred orientations (CPO) range from strong to weak. [010]-fiber patterns, characterized by a point concentration of [010] normal to the foliation and by dispersion of [100] in the foliation plane with a weak maximum parallel to the lineation, predominate relative to the [100]-fiber patterns usually observed in lithospheric mantle xenoliths and peridotite massifs. Variations in olivine CPO patterns or intensity are not correlated with modal and chemical compositions. This, together with the analysis of microstructures, suggests that reactive melt percolation postdated both deformation and static recrystallization. Preferential crystallization of metasomatic cpx along (010) olivine grain boundaries points to an influence of the preexisting deformation fabrics on melt transport, with higher permeability along the foliation. Similarity between orthopyroxene (opx) and cpx CPO suggests that cpx orientations may be inherited from those of opx during melt-rock reaction. As observed in previous studies, reactive melt transport does not weaken olivine CPO and seismic anisotropy in the upper mantle, except in melt accumulation domains. In contrast, recovery and selective grain growth during static recrystallization may lead to development of [010]-fiber olivine CPO and, if foliations are horizontal, result in apparent isotropy for vertically propagating SKS waves, but strong anisotropy for horizontally propagating surface waves.  相似文献   

2.
A suite of highly depleted peridotite xenoliths in East Serbian Palaeogene basanites represents the lithospheric mantle beneath the Balkan Peninsula. The xenoliths are harzburgites, clinopyroxene-poor lherzolites and rare dunites. They contain mostly <5 vol.% of modal clinopyroxene and are characterized by high Mg# in silicates (>91), high Cr# in spinel (mostly 0.5–0.7), and by distinctively low Al2O3 contents in orthopyroxene (mostly 1–2 wt.%). They have experienced some mantle metasomatism which has slightly obscured their original composition. Nevertheless, the general characteristics of the xenoliths imply a composition which is significantly more depleted than most non-cratonic sub-continental mantle xenolith suites, as well as orogenic peridotites and abyssal peridotites. Geological and compositional evidence suggests that the xenoliths do not represent Archean mantle. The existence of Proterozoic mantle cannot be entirely excluded, although it is in disagreement with geological evidence. On the other hand, the studied xenoliths are compositionally very similar to peridotites of modern oceanic sub-arc settings. The existence of such a depleted lithospheric mantle segment is also inferred from the presence of rare orthopyroxene-rich xenoliths in the same suite. These are interpreted to have originated as lithospheric precipitates of high-Mg, SiO2-saturated magmas that require a highly depleted mantle source. Such source is typically required by boninitic-like magmas of intraoceanic suprasubduction settings. A proposed geodynamic model to explain these observations involves accretion or underplating of the lower parts of the Tethyan oceanic lithosphere during the Upper Jurassic closure of the eastern branch of the Vardar ocean.  相似文献   

3.
Two localities on the Leizhou Peninsula, southern China (Yingfengling and Tianyang basaltic volcanoes) yield a wide variety of mantle-derived xenoliths including Cr-diopside series mantle wall rocks and two distinct types of Al-augite series pyroxenites. Metapyroxenites have re-equilibrated granoblastic microstructures whereas pyroxenites with igneous microstructures have not thermally equilibrated to the mantle conditions. An abundant suite of megacrysts and megacrystic aggregates (including garnet, plagioclase, clinopyroxene, ilmenite and apatite) is interpreted as the pegmatitic equivalents of the igneous pyroxenite suite. Layered spinel lherzolite/spinel websterite xenoliths were formed by metamorphic differentiation caused by mantle deformation, inferred to be related to lithospheric thinning. Some metapyroxenites have garnet websterite assemblages that allow calculation of their mantle equilibration temperatures and pressures and the construction of the first xenolith geotherm for the southernmost China lithosphere. Heat flow data measured at the surface in this region yield model conductive geotherms (using average crustal conductivity values) that are consistent with the xenolith geotherm for the mantle. The calculated mean surface heat flux is 110 mW/m2. This high heat flux and the high geotherm are consistent with young lithospheric thinning in southern China, and with recent tomography results showing shallow low-velocity zones in this region. The xenolith geotherm allows the construction of a lithospheric rock type section for the Leizhou region; it shows that the crust–mantle boundary lies at about 30 km, consistent with seismic data, and that the lithosphere–asthenosphere boundary lies at about 100 km.  相似文献   

4.
Seismic anisotropy has been widely used to constrain deformation and mantle flow within the upper mantle of the Earth's interior, and is mainly affected by crystallographic preferred orientation(CPO)of anisotropic mineral in lithosphere. Anisotropy of peridotites caused by deformation is the main source of seismic anisotropy in the upper mantle. Olivine is the most abundant and easily deformed mineral to form CPO in peridotite, thus the CPO of olivine controls seismic anisotropy in the upper mantle. Based on simple shear experiments and studies of natural peridotites deformation, several CPO types of olivine have been identified, including A, B, C, D, E and AG-type. Studies on the deformation of olivine have shown that the CPO of olivine is mainly related to stress, water content, temperature, pressure, partial melting and melt/fluid percolation. Most of the seismic anisotropy has been explained by the A-type olivine CPO in the upper mantle, which is commonly found in upper-mantle peridotites and produced by the simple shear in dry conditions. Previous studies showed that anisotropy was attributed to the CPO of mica and amphibole in the middle-lower crust. The comparison between mantle anisotropy calculated from mineral CPO and regional anisotropy deduced from geophysical methods is therefore particularly useful for interpreting the deformation mechanisms and geodynamic processes which affect the upper mantle in different tectonic units such as subduction system, continental rift and continental collision zone in the world. The paper summarizes the characteristics of CPO and anisotropy of major anisotropic minerals in the upper mantle. Taking the lithosphere mantle xenoliths in the southeastern Tibetan plateau as an example, we perform detailed studies on the microstructures and seismic anisotropy to better understand the deformation mechanisms and upper mantle anisotropy in this region. Results show that the CPO of olivine in peridotite xenoliths in southeastern Tibetan plateau are A-type and AG-type. The mechanisms proposed for the formation of AG-type are different from that for the A-type. Therefore, the occurrence of AG-type olivine CPO pattern suggests that this CPO may record a change in deformation mechanism and tectonic environment of the lithosphere in southeastern Tibetan plateau. Provided that the strong SKS(shear wave splitting)observed in southeastern Tibetan plateau results from lithosphere mantle, the lithosphere mantle in this region is expected to be at least 130km thick and characterized by vertical foliation. Considering that the thickness of lithosphere in southeastern Tibetan plateau is much less than 130km and the lithosphere mantle cannot explain the anisotropy measured by SKS, other anisotropy sources should be considered, such as anisotropy in the asthenosphere and the oriented melt pockets(MPO)in the upper mantle. Therefore, detailed study of CPO of anisotropic mineral is essential for constraining geophysical measurements and analyzing the dynamic process of the lithosphere reasonably.  相似文献   

5.
Chemical and thermal transfers between mantle lithosphere and O.I.B. from French Polynesia are described in an inclusion suite from the Papenoo Valley, Tahiti. The methods used consider chemical exchange kinetics in geothermometry and olivine deformation study. The mineralogical study shows the extent of the chemical and thermal exchanges between a lithosphere equilibrated at 1000–1050°C and plume basalts whose liquidus temperature is about 1250°C. The dunitification process along with the spinel and olivine “fertilization” is revealed in samples which preserved features of their former mantle deformation. The deformation study also shows that interaction took place within the mantle itself. The whole of the results implies a significant metasomatism of the mantle lithosphere and alteration of the initial geochemical signature of the deep originating O.I.B. beneath French Polynesia.  相似文献   

6.
Relicts of deformed lithospheric mantle have been identified within serpentinites and weathered peridotites recovered from nine dredge sites and one submersible dive site from across the Godzilla Megamullion, which was emplaced at the now‐extinct Parece Vela Rift in the Parece Vela Basin, a back‐arc basin in the Philippine Sea. The serpentinites consist dominantly of lizardite ± chrysotile and magnetite with minor relict primary minerals that include pyroxene, spinel, and rare olivine. The weathered peridotites consist of pyroxene, spinel, lizardite ± chrysotile, and magnetite as well as weathering products of olivine. These rocks were classified in hand specimen into three types with different structures: massive, foliated, and mylonitic. In thin‐section the serpentine minerals show no sign of deformation, whereas relict primary minerals show evidence of plastic deformation such as undulose extinction, kink bands, dynamic recrystallization, and weak to moderate crystallographic preferred orientations. Therefore, the serpentinites and weathered peridotites result from the static replacement and weathering of previously ductile‐deformed peridotite. Given their location close to or on the detachment surface that exposed them, the relicts of peridotite provide evidence of deformation in the lithospheric mantle that could be related to the formation and emplacement of the Godzilla Megamullion in the Parece Vela Rift.  相似文献   

7.
It is well established that the Earth's uppermost mantle is anisotropic, but observations of anisotropy in the deeper mantle have been more ambiguous. Radial anisotropy, the discrepancy between Love and Rayleigh waves, was included in the top 220 km of PREM, but there is no consensus whether anisotropy is present below that depth. Fundamental mode surface waves, for commonly used periods up to 200 s, are sensitive to structure in the first few hundred kilometers and therefore do not provide information on anisotropy below. Higher mode surface waves, however, have sensitivities that extend to and below the transition zone and should thus give insight about anisotropy at greater depths, but they are very difficult to measure. We previously developed a new technique to measure higher mode surface wave phase velocities with consistent uncertainties. These data are used here to construct probability density functions of a radially anisotropic Earth model down to approximately 1500 km. In the uppermost mantle, we obtain a high probability of faster horizontally polarized shear wave speed, likely to be related to plate motion. In the asthenosphere and transition zone, however, we find a high probability of faster vertically polarized shear wave speed. To a depth of 1500 km in the lower mantle, we see no significant shear wave anisotropy. This is consistent with results from laboratory measurements which show that lower mantle minerals are anisotropic but LPO is unlikely to develop in the pressure–temperature conditions present in the mid-mantle.  相似文献   

8.
The effect of mantle composition on density in the extending lithosphere   总被引：1，自引：0，他引：1  
The density distribution of the lithosphere is non-linear and discontinuous due to complex mineralogy and, most importantly, phase transitions. We evaluate the influence of changes in mantle composition on lithospheric density and its evolution during horizontal stretching, using thermodynamic calculations of the density as a function of pressure, temperature and composition. We also develop a simple parameterization based on end-member mineral reactions and geometric relationships between the geotherm and the phase boundary for comparison. The garnet–spinel peridotite transition leads to a moderate decrease in density of the mantle part of the lithospheric column at the initial stages of stretching. When the crust is sufficiently thinned and temperature is relatively high, plagioclase peridotite becomes stable in the upper part of the mantle. The density reduction due to the plagioclase-in reaction is controlled by bulk Al2O3 in the mantle and by the depth of the plagioclase-in reaction, which is mainly governed by the Na2O/Al2O3 ratio. Since Na2O and Al2O3 increase with the fertility of the mantle the phase transition effect is most pronounced for relatively fertile mantle (and strong extension) and can lead to 2.3% density reduction. This is equivalent to heating the entire lithosphere by 700 °C if only the effect of thermal expansion on density is taken into account. The formation of plagioclase peridotite can explain syn-rift uplift in sedimentary basins that experienced large mantle stretching without invoking an unrealistically strong increase in temperature. It might also be responsible for the break-up unconformity observed at continental margins.  相似文献   

9.
This paper advances new evidence for elastic anisotropy in the continental subcrustal lithosphere in southern Germany. The range of petrological models compatible with the observed azimuthal variation of seismic P-wave velocity is explored. The azimuthal distribution of amplitudes of mantle phases and the observed increase of P velocity with depth both indicate a continuation of anisotropy with depth together with an increase of preferred orientation. Even depletion of the upper mantle in basaltic components, as suggested by mantle xenoliths from various parts of Germany, cannot explain the velocity-depth and azimuthal amplitude observations without an increase of anisotropy with depth.Preferred orientation of olivine is the most likely mechanism for the observed phenomena. Its fast a-axis at the Moho level is directed towards N22.5°E. The b-axis is also required to be horizontal; i.e., the b-plane, one of the preferred glide planes of olivine, is vertical, with a strike of N22.5°E. Therefore, this preferred glide plane of olivine practically coincides with the plane of maximum horizontal shear stress deduced from fault-plane solutions of earthquakes in western Germany. This is a strong indication that the preferred orientation of olivine is formed in the recent West European crustal stress field leaking into the upper mantle. The distribution of velocities to a depth of at least 50 km requires slight horizontal rotation of the a-axis with depth by ～ 10° towards N32°E, and a change in the modal composition towards a depletion increasing with depth compatible with the composition of mantle xenoliths from western Germany. Further experiments are needed to substantiate this suggestion, which could lead to a better understanding of the interaction of crustal and upper-mantle stress-strain fields.  相似文献   

10.
Eleven harzburgites and one dunite from Ocean Drilling Program Leg 209 Hole 1274A preserve high-temperature mantle textures. Electron backscatter diffraction (EBSD) analysis shows moderately developed crystal lattice preferred orientations (LPOs) in olivine and orthopyroxene (M-indices ≈ 0.1) indicative of crystal-plastic deformation at ~ 1250 °C. These rocks preserve a protogranular texture with a weak olivine foliation, a very weak or absent orthopyroxene foliation that may be decoupled from the orthopyroxene LPO, and minor interstitial clinopyroxene and spinel. Olivine grain size distributions, along with melt-related microstructures in orthopyroxene, clinopyroxene and spinel suggest that high-temperature deformation textures have been overprinted by pervasive post-deformation melt-rock interaction. Paleomagnetic data constrain the olivine [100] axes to be subhorizontal and oriented at low angle (≤ 28.6° ± 10.6°) to the ridge axis at the onset of serpentinization. This orientation is consistent with either complex 3-D mantle upwelling or 2-D mantle upwelling coupled with complex 3-D tectonic emplacement to the seafloor.  相似文献   

11.
The previously reported “mantle isochron” [20] from the picritic basalts of the Nuanetsi-N Lebombo area is interpreted as a mixing line between asthenospheric and mantle lithospheric components. The former, despite its probable derivation from a plume, is identified as a depleted, MORB-like, composition. On the basis of trace element characteristics the latter is demonstrated to be similar to lamproitic magmas, which appear to have acted as contaminants to the asthenospheric melts. Correlation between major elements and incompatible trace elements and isotopes, found in data sets of restricted MgO content, appear to result from differing crystal fractionation histories depending on the K content (i.e., amount of lithospheric contaminant) of different magma batches. Karoo geochemical provinciality may be partly a consequence of geographical position relative to the plume axis.  相似文献   

12.
Trace elements and isotopic compositions of whole rocks and mineral separates are reported for 15 spinel-bearing harzburgite and lherzolite xenoliths from southeastern Australia. These samples have an exceedingly large range in isotopic compositions, with87Sr/86Sr ranging from 0.70248 to 0.70834 and εNd values ranging from +12.7 to −6.3. This range in isotopic compositions can be found in xenoliths from a single locality. The isotopic compositions of clinopyroxene separates and their whole rocks were found to be different in some xenoliths. Samples containing small glass pockets, which replace pre-existing hydrous minerals, generally show only small differences in isotopic composition between clinopyroxene and whole rock. In a modally metasomatized peridotite, significant differences in the Sr and Nd isotopic compositions of a coexisting phlogopite-clinopyroxene pair are present. Coexisting clinopyroxenes and orthopyroxenes from an anhydrous lherzolite have Sr isotopic compositions that are significantly different (0.70248 versus 0.70314), and yield an apparent age of 625 Ma, similar to that found previously by Dasch and Green [1]. However, the Nd isotopic compositions of the clinopyroxene and orthopyroxene are identical indicating recent (within 40 Ma) re-equilibration of Nd.Sr and Nd concentrations in the whole rocks and clinopyroxenes show an excellent positive correlation, and have an average Sr/Nd ratio of 15. This ratio is similar to the primitive mantle value, as well as that found in primitive MORBs and OIBs, but is much lower than that measured in island arc basalts and what might be predicted for a subduction zone-derived fluid. This indicates that a significant proportion of the Sr and Nd in these peridotites is introduced as a basaltic melt with intraplate chemical characteristics.The isotopic compositions of the peridotites reflect long-term, small-scale heterogeneities in the continental lithospheric mantle, and are in marked contrast to the near uniform isotopic compositions of the host alkali basalts (87Sr/86Sr= 0.7038–0.7041andεNd = +3.6 to +2.9). A minimum of three evolutionary stages are identified in the growth of the continental lithospheric mantle: an early basalt depletion event, recording the initial development and stabilization of the lithospheric mantle, followed by at least two enrichment episodes. These observations are consistent with continental lithospheric mantle growth involving the underplating of refractory peridotite diapirs.  相似文献   

13.
The homologues temperature of a crystalline material is defined as T/T_m, where T is temperature and T_m is the melting(solidus) temperature in Kelvin. It has been widely used to compare the creep strength of crystalline materials. The melting temperature of olivine system,(Mg,Fe)_2SiO_4, decreases with increasing iron content and water content, and increases with confining pressure. At high pressure, phase transition will lead to a sharp change in the melting curve of olivine. After calibrating previous melting experiments on fayalite(Fe_2SiO_4), the triple point of fayalite-Fe_2SiO_4 spinel-liquid is determined to be at 6.4 GPa and 1793 K. Using the generalized means, the solidus and liquidus of dry olivine are described as a function of iron content and pressure up to 6.4 GPa. The change of T/T_m of olivine with depth allows us to compare the strength of the upper mantle with different thermal states and olivine composition. The transition from semi-brittle to ductile deformation in the upper mantle occurs at a depth where T/T_m of olivine equals 0.5. The lithospheric mantle beneath cratons shows much smaller T/T_m of olivine than orogens and extensional basins until the lithosphere-asthenosphere boundary where T/T_m 0.66, suggesting a stronger lithosphere beneath cratons. In addition, T/T_m is used to analyze deformation experiments on olivine. The results indicate that the effect of water on fabric transitions in olivine is closely related with pressure. The hydrogen-weakening effect and its relationship with T/T_m of olivine need further investigation. Below 6.4 GPa(200 km), T/T_m of olivine controls the transition of dislocation glide from [100] slip to [001] slip. Under the strain rate of 10~(-12)–10~(-15) s~(-1) and low stress in the upper mantle, the [100](010) slip system(A-type fabric) becomes dominant when T/T_m 0.55–0.60. When T/T_m 0.55–0.60, [001] slip is easier and low T/T_m favors the operation of [001](100) slip system(C-type fabric). This is consistent with the widely observed A-type olivine fabric in naturally deformed peridotites, and the C-type olivine fabric in peridotites that experienced deep subduction in ultrahigh-pressure metamorphic terranes. However, the B-type fabric will develop under high stress and relatively low T/T_m. Therefore, the homologues temperature of olivine established a bridge to extrapolate deformation experiments to rheology of the upper mantle. Seismic anisotropy of the upper mantle beneath cratons should be simulated using a four-layer model with the relic A-type fabric in the upper lithospheric mantle, the B-type fabric in the middle layer, the newly formed A- or B-type fabric near the lithosphere-asthenosphere boundary, and the asthenosphere dominated by diffusion creep below the Lehmann discontinuity. Knowledge about transition mechanisms of olivine fabrics is critical for tracing the water distribution and mantle flow from seismic anisotropy.  相似文献   

14.
The traditional view of the rheology of the continental lithosphere, sometimes known as the “jelly sandwich model”, consists of a strong upper crust, a weak lower crust, and a strong upper lithospheric mantle. Some authors argue, however, that the lithospheric mantle is weak and contributes little to the total strength and the effective elastic thickness of the lithosphere; this weakness is claimed to be due to the mantle being wet or subjected to temperatures higher than usually believed. This paper uses the relationship between rheology of the lithosphere and heat flow to calculate theoretical effective elastic thicknesses for three regions of the central Iberian Peninsula (the Duero Basin, the Spanish Central System and the Tajo Basin), taking into account the contribution of the crust and the lithospheric mantle, for dry and wet rheologies. We found that a wet peridotite rheology for the lithospheric mantle is generally consistent with independent (based on Bouguer coherence or flexural modeling) estimates of the effective elastic thickness for the study area, whereas a dry peridotite rheology cannot be reconciled with them. Moreover, the contribution of the mantle to the bending moment of the lithosphere, and therefore to both the effective elastic thickness and the total strength of the lithosphere, is important, and it may even be the dominant contribution. Therefore, the jelly sandwich model may be considered valid for the central Iberian Peninsula.  相似文献   

15.
The Wilson-Morgan hypothesis of hot-spots, characterized by high heat flow, positive gravity anomaly and alkalic volcanism, assumes that such hot-spots are surface expressions of mantle plumes rising by thermal convection. Possible evidence of this mantle upwelling is shown here from textural, structural and chemical aspects of ultramafic xenoliths in alkalic basalts. The xenolith-bearing basalts are constanly associated with Wilson-Morgan hot-spots in the ocean basins and with their continental counterparts in the rift valleys which show extensional tectonics. Most of the xenoliths are considered to be accidental fragments of the lithosphere in the host basalts. One remarkable aspect of xenoliths from all parts of the world is their ubiquitous tectonite fabric. The microstructures of these xenoliths are due to plastic deformation. Some of the xenoliths from Baja California show characteristic deformational features which are also found in the marginal parts of diapirically intruded high-temperature peridotite massifs. A model is proposed for the origin of xenoliths in alkalic basalts by mantle upwelling in which the plastic deformation of the xenoliths reflects this dynamic uprise.  相似文献   

16.
Analysis of seismic anisotropy in the crust and mantle wedge above subduction zones gives much information about the dynamic processes inside the Earth. For this reason, we measure shear wave polarization anisotropy in the crust and upper mantle beneath central and southwestern Japan from local shallow, intermediate, and deep earthquakes occurring in the subducting Pacific slab. We analyze S phases from 198 earthquakes recorded at 42 Japanese F-net broadband seismic stations. This data set yields a total of 980 splitting parameter pairs for central and southwestern Japan. Dominant fast polarization directions of shear waves obtained at most stations in the Kanto–Izu–Tokai areas are oriented WNW–ESE, which are sub-parallel to the subduction direction of the Pacific plate. However, minor fast polarization directions are oriented in NNE–SSW directions being parallel to the strike of the Japan Trench, especially in the north of Izu Peninsula and the northern Tokai district. Generally, fast directions obtained at stations located in Kii Peninsula and the Chubu district are oriented ENE–WSW, almost parallel to the Nankai Trough, although some fast directions have NW–SE trends. The fast directions obtained at stations in northern central Honshu are oriented N–S. Delay times vary considerably and range from 0.1 to 1.25 s depending on the source depth and the degree of anisotropy along the ray path. These lateral variations in splitting character suggest that the nature of anisotropy is quite different between the studied areas. Beneath Kanto–Tokai, the observed WNW–ESE fast directions are probably caused by the olivine A-fabric induced by the corner flow. However, the slab morphology in this region is relatively complicated as the Philippine Sea slab is overriding the Pacific slab. This complex tectonic setting may induce lateral heterogeneity in the flow and stress state of the mantle wedge, and may have produced NNE–SSW orientations of fast directions. The ENE–WSW fast directions in Kii Peninsula and the Chubu district are more coherent and may be partly induced by the subduction of the Philippine Sea plate. The N–S fast directions in northern central Honshu might be produced by the trench-parallel stretching of the wedge due to the curved slab at the arc–arc junction.  相似文献   

17.
It has been hypothesised that seismic and electrical anisotropy at the base of the lithosphere are caused by strain-induced lattice-preferred orientation (LPO) of olivine [100] axes parallel to present-day plate motion. This would imply that seismic and electrical anisotropy observations can provide geodynamicists with fundamental information for characterising mantle flow. The qualitative agreement between the fast direction of SV-waves and direction of maximum electrical conductance modelled deeper than 150 km below the North Central craton of Australia appear to support a common alignment mechanism, and the observed, anisotropic electrical conductances can be generated by hydrogen diffusivity in a water-poor (<1000 ppm H/Si) olivine mantle. A quantitative test is proposed for the hypothesis that electrical anisotropy is generated by anisotropic hydrogen diffusion rates (D) in olivine. Electrical anisotropy factors are computed using random resistor network models assuming that D[100]≈20×D[010]≈40×D[001]. Electrical and seismic anisotropies calculated from olivine LPO angular distribution functions modelled for a range of shear strains under a simple shear deformation demonstrate that the intensity of olivine [100] alignments (and associated shear strains) that would be required to explain the electrical anisotropy in the mantle below central Australia are significantly greater than predicted by Rayleigh wave anisotropies. The poor agreement between the observed electrical anisotropies and the electrical anisotropies that would be predicted from the Rayleigh wave anisotropies indicates that either (i) electrical anisotropy in the upper mantle below central Australia is not generated by hydrogen diffusivity alone or (ii) the seismic anisotropy is underestimated. The orientation of the olivine [100] axes maxima is inferred to be ∼30° rotated relative to the direction of present-day absolute plate motion (APM) that is determined relative to the hotspot reference frame (HS2-NUVEL1). Both the APM direction that is determined relative to a reference frame defined by requiring no-net rotation of the lithosphere (NNR-NUVEL1) and GPS-derived plate motion vectors fit the geophysical observations of upper mantle anisotropy better. This may support the contention that hotspots are not stationary relative to the deep mantle.  相似文献   

18.
本文通过对出露于青藏高原东南缘云南六合地区的新生代深源岩石包体(斜长角闪岩、角闪石岩和石榴石透辉岩)的显微组构和地震波各向异性的研究来约束新生代青藏高原东南缘的地壳各向异性.通过角闪石地质压力计计算得知斜长角闪岩、角闪石岩和石榴石透辉岩包体来源于地壳28～36km,为中-下地壳岩石包体.EBSD测量结果显示包体中角闪石的CPO (晶格优选定向)为Type-IV型和(100)[001]滑移,单斜辉石的CPO为SL型和(100)[001]滑移,暗示中-下地壳为高温强变形的特征.通过CPO数据计算获得斜长角闪岩、角闪石岩和石榴石透辉岩包体全岩VP各向异性为1.9%～13.3%,最大分裂的剪切波各向异性(AVS)为1.17%～8.01%.结合前人的研究结果,该地区的地壳岩石能够解释利用Pms震相测量获得的分裂延迟时间,表明云南西北地区的壳内各向异性源于中-下地壳矿物的定向排列.云南西北地区的Pms快波方向近NW-SE向分布并与SKS的快波方向相近,暗示岩石圈变形是耦合的,受控于青藏高原向东南挤出的构造背景.  相似文献   

19.
青藏高原东南缘地震各向异性及其深部构造意义   总被引：1，自引：0，他引：1       下载免费PDF全文
青藏东南缘是青藏高原物质东流的通道,为了更全面了解复杂的岩石圈结构和强烈的变形特征,本文介绍了青藏东南缘岩石圈各向异性的形态,综合其他研究者得到的该区域壳幔各向异性结果,增加了部分新的资料,更新了青藏东南缘岩石圈方位各向异性图像,探讨了区域深部构造意义.
基于近场小震、远震和背景噪声资料计算结果,青藏东南缘地震各向异性展现出独特的区域空间分布和垂向层次性分布形态,展现了3个主要特征.（1）青藏东南缘上地壳各向异性与地表变形测量结果相符,快剪切波偏振方向（即快波方向）呈现与地表运动特征一致的发散性,与主压应力方向一致,但受到地质构造的影响.（2）青藏东南缘下地壳方位各向异性展现了更好的方向一致性,但方位各向异性程度相对较弱,在红河断裂带西北端部和小江断裂带下方有两个下地壳低速区,其方位各向异性程度与上地壳相当.（3）青藏东南缘岩石圈方位各向异性,呈现南、北分区特征,南北分界线大致在26°20'N,快波方向在北部近似为NS方向,在南部近似为EW方向.
本文推测：（1）在26°20'N北侧的上地幔有较厚的高速体,高速体南侧边缘呈现出近EW走向的直立墙形构造,其南侧软弱的上地幔物质在EW方向上流动,导致了岩石圈方位各向异性特征在空间发生突然的变化,快波方向由北部的NS变为南部的EW方向;（2）小江断裂带是现今的华南地块的地壳西边界,但岩石圈尺度的方位各向异性展现出的趋势性表明,华南地块的上地幔物质越过了小江断裂带到达其西侧,揭示了华南地块与青藏地块接触碰撞造成的岩石圈物质变形和上地幔软流圈物质运移的深部图像.地震各向异性能揭示区域深部构造与介质变形的信息,不同观测资料的综合分析有助于获得更清晰的各向异性三维图像.  相似文献   

20.
Sung Hi  Choi  Sung-Tack  Kwon 《Island Arc》2005,14(3):236-253
Abstract   The mantle-derived xenoliths entrained in the Pliocene basanite from Baengnyeong Island, South Korea, are spinel lherzolites and spinel harzburgites. The overall compositional range of the Baengnyeong xenoliths matches that of the post-Archean xenoliths of lithospheric mantle origin from eastern China, but without any compositional evidence for a refractory Archean mantle root. Mineral compositions of the xenoliths have been used to estimate the equilibrium temperatures and pressures, and to construct a paleogeothermal gradient of the source region. The xenolith-derived paleogeotherm is constrained from about 820°C at 7.3 kbar to 1000°C at 20.6 kbar. Like those from the post-Archean Chinese xenoliths of lithospheric mantle origin, the Baengnyeong geotherm is considerably elevated relative to the conductive models at the depth of the crust–mantle boundary, reflecting a thermal perturbation probably related to lithospheric thinning. There is no significant P / T difference between harzburgite and lherzolite, which suggests that the harzburgites are interlayered with lherzolites within the depth interval beneath Baengnyeong Island.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号