首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Waveforms generated by the 50t explosion of project Brightlight(Ⅰ) were recorded by HILR array.Using array techniques,the author performed identification,f-k analysis,velocity spectrum analysis,etc.of the weak signals.The analysis results show that the signal-to-noise ratio after beamforming was obviously enhanced,and the signal could be clearly shown.The energy from this explosion was mainly concentrated in the 1 ～ 8Hz range from f-k analysis.The velocity spectrum gave clear positions of event phases,which could not be seen in the original weak signals.The maximum energy distribution obtained by the Beaman method is close to the theoretical value in the azimuth-slowness domain.  相似文献   

2.
Chin Array is a dense portable broadband seismic network to cover the entire continental China, and the Phase I is deployed along the north-south seismic belt in southwest China. In this study, we analyze seismic data recorded on the Chin Array following the February 15,2013 Chelyabinsk(Russia) meteor. This was the largest known object entering the Earth's atmosphere since the1908 Tunguska meteor. The seismic energy radiated from this event was recorded by seismic stations worldwide including the dense Chin Array that are more than 4000 km away. The weak signal from the meteor event was contaminated by a magnitude 5.8 Tonga earthquake occurred *20 min earlier. To test the feasibility of detecting the weak seismic signals from the meteor event, we compute vespagram and perform F-K analysis to the surface-wave data. We identify a seismic phase with back azimuth(BAZ) of 329.7° and slowness of 34.73 s/deg, corresponding to the surface wave from the Russian meteor event(BAZ *325.97°). The surface magnitude(MS) of the meteor event is 3.94 ± 0.18. We also perform similar analysis on the data from the broadband array F-net in Japan, and find the BAZ of the surface waves to be316.61°. With the different BAZs of Chin Array and F-net,we locate the Russian meteor event at 58.80°N, 58.72°E.The relatively large mislocation(*438 km as compared with 55.15°N, 61.41°E by others) may be a result of thebending propagation path of surface waves, which deviates from the great circle path. Our results suggest that the dense Chin Array and its subarrays could be used to detect weak signals at teleseismic distances.  相似文献   

3.
Seismic array can be traced back to 1950s when it mainly aimed at detecting and distinguishing the signals of nuclear explosion and seismic signals. The research on seismic array includes seismic array techniques and applications of array in geophysics. Array techniques involve array design and data processing methods (Anne, 1990). Nowadays, the continuous development of seismic array(s theory could relate to many scientific issues in geophysical field (Tormod, 1989; Mykkeltveit, Bungum, 198…  相似文献   

4.
Seismic array can be traced back to 1950s when it mainly aimed at detecting and distinguishing the signals of nuclear explosion and seismic signals. The research on seismic array includes seismic array techniques and applications of array in geophysics. Array techniques involve array design and data processing methods (Anne, 1990). Nowadays, the continuous development of seismic array￠s theory could relate to many scientific issues in geophysical field (Tormod, 1989; Mykkeltveit, Bungum, 1984). Seismic array is mainly applied to detect weak events. The response characteristic of array is an important indication of array￠s detection ability. Therefore, when we study an array or construct an array, one of the neces-sary works is to calculate the response characteristics of the array (Harjes, 1990). The aperture and layout of array are two dominating geometrical features. The typical aperture of interna-tional array is generally from several to tens kilometers. For instance, arrays with aperture of dozens kilometers aperture are KSA, WRA, YKA, etc, while arrays with several kilometer aperture are ARC, FIN, GEE, etc. Moreo-ver, in the view of array￠s layout, NOR, GER, etc have circle layout, while WRA, YKA, etc have decussating layout. This paper mainly discusses the relation between deployment of array and wavenumber response. With the example of constructing Shanghai Seismic Array, this paper provides one practical solution to search the proper array deployment. In this paper, the simple delay beam technique is adopted to calculate the response characteris-tics of array. Certainly, the different processing methods have different result, but the result from the simple delay beam processing could be enough to reflect the feature of an array.  相似文献   

5.
Weak Seismic Signal Extraction Based on the Curvelet Transform   总被引：1，自引：1，他引：0  
Seismic signal denoising is a key step in seismic data processing. Airgun signals are easy to be interfered with by noise when it travels a long distance due to the weak energy of active source signal of the airgun. Aiming to solve this problem, and considering that the conventional Curvelet transform threshold processing method does not use the seismic spectrum information, we independently process the Curvelet scale layer corresponding to valid data based on the characteristics of the Curvelet transform of multi-scale, multi-direction and capable of expressing the sparse seismic signals in order to fully excavate the information features. Combined with the Curvelet adaptive threshold denoising the algorithm, we apply the Curvelet transform to denoising seismic signals while retaining the weak information in the signal as much as possible. The simulation experiments show that the improved threshold denoising method based on Curvelet transform is superior to the frequency domain filtering, wavelet denoising and traditional Curvelet denoising method in detailed information extraction and signal denoising of low SNR signals. The calculation accuracy of the relative wave velocity variation of underground medium is improved.  相似文献   

6.
The Binchuan region of Yunnan is a structurally complex region with mountains, basins, and active faults. In this situation,seismic wave propagation exhibits complex characteristics due to strong heterogeneity of underground media instead of following the great-circle path. In order to obtain a high-resolution shallow crustal structure, a dense seismic array was deployed during March 21 to May 30, 2017 in this area. To better understand the complexities of seismic wave propagation in this region, we perform array-based frequency-domain beamforming analysis and single-station based polarization analysis to investigate the characteristics of seismic wave propagation, using airgun-generated P-wave signals recorded by dense array stations in this experiment. The results from these two methods both reveal similar but complex characteristics of seismic wave propagation in the Binchuan basin. The azimuth anomalies off the great-circle path are quite large with values up to 30°, which is caused by strong structural heterogeneity in the very shallow crust. Our research provide a better understanding of the complex geologic structures in this area and provide guidance for detecting concealed faults and distribution of velocity anomalies.  相似文献   

7.
A broadband seismic array of 7 stations was set up in the western Dabie Mountains (31°20′-31°50′N, 114°30′-115°E). Teleseismic events from May 2001 to November 2001 were collected and analyzed by radial receiver function to determine the S-wave velocity structure of the crust and uppermost mantle. The crustal thickness is 32-38 km beneath the array. The crust-mantle boundary appears as a gently north-dipping velocity discontinuity, but turns to be a velocity gradient beneath a station near the Qiliping shea...  相似文献   

8.
For near-fault ground motion,there should be a remarkable impulsive energy supply. Therefore,it is essential to check the validity of actual seismic design codes with energy balance concept. Based on the relationship between the spectrum velocity and the input energy equivalent velocity with 5% damping ratio,the input energy spectra compatible with main China and USA seismic codes were derived,and the accuracy and applicability were veri-fied by using near-fault records. The recommended energy input design spectrum (EIDS) applicable to the distance of 0～15 km from fault was introduced to check the validity of modern seismic codes. Comparison tests show that the GB50011-2001 Code of China can just match the energy effect of near-fault ground motion to a certain extent only under seldom occurred earthquake with fortification intensity of 9 degree for site soil of Ⅲ and IV,indicating that the impact of near-fault effect has not been embodied in the current code acceleration spectrum. In order to make the design spectrum be applicable to near-fault region,it is necessary to adjust the spectrum platform pa-rameters. On the contrary,for distinct fault distance and site soil,the UBC97 Code of USA can match well with the energy supply of near-fault ground motion except for the site soil of hard rock (SA). Accordingly,correctness of the formula derivation in this paper is certified.  相似文献   

9.
Tides are the major energy source for ocean mixing, regulating the variation of oceanic circulation and sediment transport in the deep sea. Here twenty months of high-resolution current profiles, which were observed via a mooring system at a water depth of 2100 m in the northern South China Sea(SCS), are used to investigate seasonal variability in deep-sea tides.Spectral analysis shows that tides in this region are dominated by diurnal tide, and both diurnal and semidiurnal tide are vertical mode-1 dominant. Baroclinic diurnal tidal current exhibits pronounced seasonal variability, showing its kinetic energy was the strongest in summer, and the maximum depth-averaged value was up to 86.7 cm~2 s~(-2), which was about 1.5 times of that in winter and twice that in spring and autumn. In contrast, baroclinic semidiurnal tide displays no evident seasonal variability. Such seasonal variability in baroclinic tide was mainly modulated by the barotropic forcing from the Luzon Strait. On the other hand,two anticyclonic eddies and one cyclonic eddy, which originated off southwestern Taiwan in winter, crossed the mooring system.The cyclonic eddy had weak impact on current velocity in the deep sea, but the two deep-reaching anticyclonic eddies enhanced the current velocity through the full-water column by inducing strong subinertial flows. Consequently, the kinetic energy of tides was strengthened and the incoherent variance of baroclinic diurnal tide increased in winter, which contributed ～85% of the variability in diurnal tide. Meanwhile, the velocity of baroclinic diurnal tide was reduced in winter, which was attributed to the weakened stratification induced by the passage of anticyclonic eddies in the deep sea. The seasonal variability of tides in the deep northern SCS can provide a dynamic mechanism for interpreting sediment transport processes in the deep sea on different time scales.  相似文献   

10.
We report here the observation result of joint observation of long period tremor signals with broadband seismome-ter,tiltmeter and gravimeter at the HUST(Huazhong University of Science and Technology)station.The observed data were compared and analyzed.Since 2005,the several tens of abnormal tremor signals which are weak,com-plex and duration of 2 to 3 days have been synchronously recorded by the different instruments.The tremor signals have the periodic domain in the range of 3 to 5 minutes,20 to 30 minutes and even more than 1 hour.The observa-tion shows such tremors are a physical existence.The analysis indicates that a part of the tremors caused by the typhoon from the western Pacific Ocean.These tremors have a close relationship with wind velocity of typhoon and distance between the typhoon center and the station.Except these,the cause of others is still unclear.  相似文献   

11.
The crustal S-velocity structure and radial anisotropy along a dense linear portable seismic array with 64 broadband seismic stations were investigated from ambient noise tomography with about one-year-long ambient noise recordings. The array transverses the southern part of the central North China Craton(CNCC) and western NCC(WNCC) from east to west and reaches the adjacent Qilian Orogenic Belt(QOB). The phase velocity structures of Rayleigh waves at 5–35 s and Love waves at 5–30 s were measured. The crustal S-velocity structures(Vsv and Vsh) were constructed from the dispersion data(Rayleigh and Love waves,respectively) from point-wise linear inversion with prior information of the Moho depth and average crustal Vp/Vs ratio. The radial anisotropy along the profile was calculated based on the discrepancies between Vsv and Vsh as 2×(Vsh.Vsv)/(Vsh+Vsv). The results show distinct structural variations in the three major tectonic units. The crustal architecture in the southern CNCC is complicated and featured with wide-distributed low-velocity zones(LVZs), which may be a reflection of crustal modification resulting from Mesozoic-Cenozoic tectonics and magmatic activities. The pronounced positive radial anisotropy in the lower-lowermost crust beneath the Shanxi-Shaanxi Rift and the neighboring areas could be attributed to the underplating of mantle mafic-ultramafic materials during the Mesozoic-Cenozoic tectonic activation. In southern Ordos, the overall weak lateral velocity variations, relative high velocity and large-scale positive radial anisotropy in mid-lower crust probably suggest that the current crustal structure has preserved its Precambrian tectonic characteristics. The low-velocity westward-dipping sedimentary strata in the Ordos Block could be attributed to the Phanerozoic whole-basin tilting and the uneven erosion since late Cretaceous. Integrated with previous studies, the systematic comparison of crustal architecture was made between the southern and northern part of CNCC-WNCC. The similarities and differences may have a relation with the tectonic events and deformation histories experienced before and after the Paleoproterozoic amalgamation of the NCC. The nearly flat mid-crustal LVZ beneath the southern QOB weakens gradually as it extends to the east, which is a feature probably associated with crustal vertical superpositionand ductile shear deformation under the intensive compressional regime due to the northeastward growth and expansion of the Tibetan Plateau.  相似文献   

12.
The ProP waveform data obtained from a deep seismic sounding profile, which ran through Zhangbei seismic region, were processed by means of both seismic wave complexity coefficient and frequency spectrum analysis methods, and the complexity characteristics of crest-mantle boundary beneath the studied area and its adjacent region were determined. The results show that the place below epicenter can be taken as boundary, the northern side of which is Inner Mongolia axis with small complexity coefficient and the southern side of which is Huai＇an basin with large complexity coefficient. The different spectrum patterns at the two sides of the epicenter were inferred from spectrum analysis. In the epicentral area, there have been multi-period magmatic eruptions since Meso-Cenozoic and craters exist at the surface. From the velocity imaging of middle and upper crust in Zhangbei seismic region it can be found that there are crustal low velocity bodies around the craters and also there are low velocity zones, which went into deep crust. It is suggested that the distinct zones of crust-mantle boundary complexity may be the margin, where the magma had intruded due to magma activity in Meso-Cenozoic. The southern side with large complexity coefficient is deep magmatic activity area and the northern side with small complexity coefficient is stable crust-mantle tectonics. The difference of crust-mantle complexity provides deep background for the development of strong earthquake.  相似文献   

13.
The estimate of seismic site effects by experimental approaches is based on different assumptions aimed at simplifying the complex actual site conditions and related uncertainties.However,the reliability of the results can increase if the experimental data is focused on quite strong seismic sequences and the on-site acquisition of a large number of signals is deemed strategic for the assessment of the expected phenomena.Based on these considerations,the ground motion at the Red Zone sector of Amatrice hill,violently struck by the 2016-2017 Central Italy seismic sequence,was analyzed via an observational approach.A large set of weak motions(moment magnitude Mw 2.5-3.9)was analyzed in this study by means of standard(SSR)and horizontal to vertical(HVSR)spectral ratio techniques.The results from the experimental analysis of the site effects by using weak motion and noise signals show a significant amplification at the top of Amatrice hill with a remarkable polarization of the motion and changes in spectral shapes according to the topographic setting of the relief.  相似文献   

14.
An analytic investigation of the effect of surface seal mechanical properties, overland flow, and subsurface hydrology was performed on headcut development. Headcut growth rates on upland areas have been observed to be quite small （less than 0.00015 meter per second） and that they occur in increments in which chips break off at points where cracks have developed in surface seals. The substrate soil under the seal collapses and is removed by the flow. This mode of headcut development is the result of a strong interaction between the surface and the subsurface processes. The surface process is energetically controlled by the mechanical features of the seal whereas the subsurface process is hydrologically controlled. The analysis yields estimates of the temporal scale of headcut velocities. In cases of infiltration from the vertical gully wall into the substrate, the flexural wave velocity （seismic sound velocity） was found to inversely affect headcut velocity.  相似文献   

15.
The Seasonal Variation of Large Volume Airgun Signals in Hutubi, Xinjiang   总被引：1，自引：1，他引：0  
In order to study the seasonal variation of large volume airgun signals in Hutubi, Xinjiang, we analyzed 2,936 signals of airgun source excitations during 2015-2016 received by a seismograph on the bank of the excitation pool. Firstly, the RMS value of the signal amplitude and the daily average temperature were compared after linearly superimposing the signal in days, to analyze the influence of the surface ice cover on the excitation energy release of the airgun source. The result shows that the ice cover will reduce the excitation energy, and the thicker the ice cover is, the more obvious the excitation energy reduces. Secondly, the time-frequency analysis method was used to analyze the influence of the surface ice cover on the signal frequency. It is concluded that the existence of the ice cover has little effect on the signal frequency, but it will affect the intensity of the signal around 4Hz between 1-2s after excitation. The cause of these phenomena is that the ice cover affects the bubble oscillation, which in turn affects the energy conversion. The study shows that when using the cross-correlation delay method to calculate the wave velocity, the signals can be divided into two periods according to the daily average temperature:with or without ice cover on the upper surface of the excitation pool. This can help eliminate the influence of the source variation and improve the accuracy of the monitoring results.  相似文献   

16.
A new 3D velocity model of the crust and upper mantle in the southeastern(SE) margin of the Tibetan plateau was obtained by joint inversion of body-and surface-wave data. For the body-wave data, we used 7190 events recorded by 102 stations in the SE margin of the Tibetan plateau. The surface-wave data consist of Rayleigh wave phase velocity dispersion curves obtained from ambient noise cross-correlation analysis recorded by a dense array in the SE margin of the Tibetan plateau. The joint inversion clearly improves the v S model because it is constrained by both data types. The results show that at around 10 km depth there are two low-velocity anomalies embedded within three high-velocity bodies along the Longmenshan fault system. These high-velocity bodies correspond well with the Precambrian massifs, and the twolocated to the northeast of 2013 M S7.0 Lushan earthquake are associated with high fault slip areas during the 2008 Wenchuan earthquake. The aftershock gap between 2013 Lushan earthquake and 2008 Wenchuan earthquake is associated with low-velocity anomalies, which also acts as a barrier zone for ruptures of two earthquakes. Generally large earthquakes(M≥5) in the region occurring from2008 to 2015 are located around the high-velocity zones,indicating that they may act as asperities for these large earthquakes. Joint inversion results also clearly show that there exist low-velocity or weak zones in the mid-lower crust, which are not evenly distributed beneath the SE margin of Tibetan plateau.  相似文献   

17.
Extreme rainfall-induced debris flow can be catastrophic to an urban area,and installation of slit-type barriers can prevent such damage while minimizing negative impact on environments.However,the performance of slit-type barriers against debris flows remains poorly identified partly due to the innate complexity in interactions between debris flow and solid structure.This paper investigated the flow behaviors of debris affected by slit-type barriers using the computational fluid dynamics(CFD)method,in which the numerical model based on the volume of fluid method was verified using the physical modeling results.The sensitivity analysis was performed by building metamodels to determine the primary parameters influencing the barrier performance against debris flows among various variables,in which the effect of input properties and design parameters,particularly the soil concentration in fluidized debris,initial velocity and volume of debris,the barrier height,and the opening ratio,was evaluated from the perspectives of the flow energy reduction and debris trapping.The initial velocity and volume of debris were found to play a significant role in determining the debris flow characteristics.A decrease in the opening ratio in the channel primarily facilitated the energy reduction and trapping due to the reduced opening size.However,the barrier height exhibited a limited effect when the height was sufficiently high to block the debris flow volume.In addition,it was observed that the double barrier system effectively increased the energy reduction while keeping the benefit of open-type barrier.The developed simulation method and obtained results provide an effective tool and an insight that can contribute to an optimum design of the debris-flow barrier.  相似文献   

18.
The relationship between turbulent fluid motions and sediment particle motions over mobile sand dunes was investigated by using a laser Doppler velocimeter and an acoustic backscatter system in laboratory experiments performed at the USDA-ARS-National Sedimentation Laboratory. Profiles of acoustic backscatter from particles and at-a-point turbulence data were collected while translating both measurement devices downstream at the speed of mobile dune bedforms. The resulting data set was used to examine the frequency （recurrence frequency） at which the fluctuating backscatter and fluid velocity signals exceeded magnitude thresholds based on the standard deviation （σ） of the local velocity and the magnitude the acoustic signal resulting from backscatter from suspended particles. The slope of the downstream and vertical velocity recurrence frequencies generally indicated a gradually increasing recurrence time with increasing elevation. The recurrence frequency for acoustic backscatter data was not strongly variable with elevation. The closest correspondence between the recurrence frequencies of sediment backscatter and vertical velocities at the 1σ magnitude threshold was in a region defined by X/L〈0.4 and y〈6 cm. The downstream velocity was most closely related to backscatter in a small region at 0.4〈X/L〈0.8 and less than 3-4 cm from the bed.  相似文献   

19.
In this paper,the dispersion curves of the Rayleigh wave and Love wave were extracted from the seismic noise records of 25 broadband stations of the Fujian Seismic Network, and inverted for the lithosphere velocity structure. Furthermore,the velocity model was verified by the seismic explosion observations. Our results indicate that the resolution of the lithosphere velocity structure obtained by this method is good in the shallow part,but in the deep part,inversion accuracy for the wave velocity structure is low,which is caused mainly by the small inter-station distance chosen in the paper. Thus the wave dispersion curves have high accuracy in the short-period part,but the warp of the wave dispersion curve in long-period part is large. Considering the results from both the noise inversion and the traditional inversion,we finally present a new velocity model,and the theoretical travel time calculated with the new model matches the explosion travel time very well.  相似文献   

20.
The velocity structure of the crust beneath Liaoning province and the Bohai sea in China was imaged using ambient seismic noise recorded by 73 regional broadband stations. All available three-component time series from the 12-month span between January and December 2013 were cross-correlated to yield empirical Green's functions for Rayleigh and Love waves. Phasevelocity dispersion curves for the Rayleigh waves and the Love waves were measured by applying the frequencytime analysis method. Dispersion measurements of the Rayleigh wave and the Love wave were then utilized to construct 2D phase-velocity maps for the Rayleigh wave at8–35 s periods and the Love wave at 9–32 s periods,respectively. Both Rayleigh and Love phase-velocity maps show significant lateral variations that are correlated well with known geological features and tectonics units in the study region. Next, phase dispersion curves of the Rayleigh wave and the Love wave extracted from each cell of the 2D Rayleigh wave and Love wave phase-velocity maps,respectively, were inverted simultaneously to determine the3 D shear wave velocity structures. The horizontal shear wave velocity images clearly and intuitively exhibit that the earthquake swarms in the Haicheng region and theTangshan region are mainly clustered in the transition zone between the low-and high-velocity zones in the upper crust, coinciding with fault zones, and their distribution is very closely associated with these faults. The vertical shear wave velocity image reveals that the lower crust downward to the uppermost mantle is featured by distinctly high velocities, with even a high-velocity thinner layer existing at the bottom of the lower crust near Moho in central and northern the Bohai sea along the Tanlu fault, and these phenomena could be caused by the intrusion of mantle material, indicating the Tanlu fault could be just as the uprising channel of deep materials.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号