共查询到20条相似文献，搜索用时 31 毫秒
1.
The paper describes and evaluates an incremental plasticity constitutive model for unsaturated, anisotropic, nonexpansive soils (CMUA). It is based on the modified Cam-Clay (MCC) model for saturated soils and enhances it by introducing anisotropy (via rotation of the MCC yield surface) and an unsaturated compressibility framework describing a double dependence of compressibility on suction and on the degree of saturation of macroporosity. As the anisotropic and unsaturated features can be activated independently, the model is downwards compatible with the MCC model. The CMUA model can simulate effectively: the dependence of compressibility on the level of developed anisotropy, uniqueness of critical state independent of the initial anisotropy, an evolving compressibility during constant suction compression, and a maximum of collapse. The model uses Bishop's average skeleton stress as its first constitutive variable, favouring its numerical implementation in commercial numerical analysis codes (eg, finite element codes) and a unified treatment of saturated and unsaturated material states. 相似文献
2.
This study presents a simple approach to modelling the effect of temperature on the deformation and strength of unsaturated/saturated soils by using the average skeleton stress and degree of saturation. The concept of thermo-induced equivalent stress is introduced to consider the influence of temperature on the pre-consolidated stress. A skeleton stress–saturation framework is applied to enable the model to describe the thermo-elastoplastic behaviour of both unsaturated and saturated soils, as the skeleton stress can smoothly shift to Terzaghi’s effective stress if saturation changes from the unsaturated to the saturated condition. The new model only employs seven parameters, of which five parameters are the same as those used in the Cam-Clay model. The other two parameters can be easily determined by oedometer tests and simple thermo-mechanical tests. Numerical simulations of isotropic loading tests and triaxial shear tests under different conditions are conducted to illustrate the performance of the proposed model. By comparing with experimental temperature controlled oedometer tests and triaxial tests, it is confirmed that the proposed model is able to capture the thermo-mechanical behaviour of unsaturated/saturated normally and over-consolidated soils with a set of unified parameters. 相似文献
3.
This paper introduces an unconventional constitutive model for soils, which deals with a unified thermo‐mechanical modelling for unsaturated soils. The relevant temperature and suction effects are studied in light of elasto‐plasticity. A generalized effective stress framework is adopted, which includes a number of intrinsic thermo‐hydro‐mechanical connections, to represent the stress state in the soil. Two coupled constitutive aspects are used to fully describe the non‐isothermal behaviour. The mechanical constitutive part is built on the concepts of bounding surface theory and multi‐mechanism plasticity, whereas water retention characteristics are described using elasto‐plasticity to reproduce the hysteretic response and the effect of temperature and dry density on retention properties. The theoretical formulation is supported by comparisons with experimental results on two compacted clays. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
4.
The effective stress principle has been efficiently applied to saturated soils in the soil mechanics and geotechnical engineering practice; however, its applicability to unsaturated soils is still under debate. The appropriate selection of stress state variables is essential for the construction of constitutive models for unsaturated soils. Owing to the complexity of unsaturated soils, it is difficult to determine the deformation and strength behaviors of unsaturated soils uniquely with the previous single‐effective‐stress variable theory and two‐effective‐stress‐variable theory in all the situations. In this paper, based on the porous media theory, the specific expression of work is proposed, and the effective stress of unsaturated soils conjugated with the displacement of the soil skeleton is further derived. In the derived work and energy balance equations, the energy dissipation in unsaturated soils is taken into account. According to the derived work and energy balance equations, all of the three generalized stresses and the conjugated strains have effects on the deformation of unsaturated soils. For considering these effects, a principle of generalized effective stress to describe the behaviors of unsaturated soils is proposed. The proposed principle of generalized effective stress may reduce to the previous effective stress theory of single‐stress variable or the two‐stress variables under certain conditions. This principle provides a helpful reference for the development of constitutive models for unsaturated soils. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
5.
This paper presents an advanced constitutive model for unsaturated soils, using Bishop’s effective stress (σ′) and the effective degree of saturation (Se) as two fundamental constitutive variables in the proposed constitutive model. A sub-loading surface and a unified hardening parameter (H) are introduced into the σ′–Se modelling framework to interpret the effects of initial density on coupled hydro-mechanical behaviour of compacted soils. Compared with existing models in the literature, the main advantage of the proposed model that it is capable of modelling hydro-mechanical behaviour of unsaturated soils compacted to different initial densities, such as the dependence of loading–collapse volume on initial void ratio and density effect on the shearing-induced saturation change. The proposed model requires 13 material parameters, all of which can be calibrated through conventional laboratory tests. Numerical studies are conducted to assess the performance of the model for a hypothetical soil under two typical hydro-mechanical loading scenarios. The proposed advanced unsaturated soil model is then validated against a number of experimental results for both isotropic and triaxial conditions reported in the literature. 相似文献
6.
高饱和度的非饱和土中由于气体处于封闭状态,其内部气压的变化必将对土体的行为产生影响。首先,对高饱和度非饱和土特性进行探讨和研究,随后,在已有非饱和土模型框架基础上,采用广义有效应力原理,建立一个适用于高饱和度条件下的非饱和土的弹塑性本构模型。模型中引入气相耗散的影响,在硬化方程中考虑封闭气体压力改变的影响。最后,利用已有的试验结果来对模型进行验证,并将模型预测结果与前人模型进行对比,表明模型预测可以很好地预测土体的行为,尤其是在高饱和度条件下其结果比其他模型更加接近实际情况。 相似文献
7.
An unsaturated soil is a three-phase material that is ubiquitous on the earth’s surface. The fully saturated and completely dry states are just two limiting conditions of an unsaturated soil. The state and properties of unsaturated soils can change significantly with external loads, weather conditions and groundwater level. Proper modelling of the state-dependent behaviour of unsaturated soils is crucial for analysing the performance of almost all civil engineering structures. So far, there are many unsaturated soil models and several relevant review papers in the literature. None of the existing review papers, however, focused on the state dependency of unsaturated soil behaviour. Moreover, some aspects of soil behaviour have not been reviewed, including small strain stiffness, dilatancy and stress-dependence of water retention curve. In the current review paper, the state dependency of unsaturated soil behaviour is reviewed, with a particular attention to the three missing parts. The review is carried out in a unified and relatively simple constitutive framework, which adopts a three-by-three compliance matrix to link incremental volumetric strain, deviator strain and degree of saturation to incremental mean net stress, deviator stress and suction. All of the nine variables in the proposed three-by-three compliance matrix have clear physical meanings and can be measured through compression, shearing and water retention tests. Theoretical models based on other constitutive stress variables can be also converted to this framework by matrix transformation.
相似文献8.
An unsaturated soil is a state of the soil. All soils can be partially saturated with water. Therefore, constitutive models for soils should ideally represent the soil behaviour over entire ranges of possible pore pressure and stress values and allow arbitrary stress and hydraulic paths within these ranges. The last two decades or so have seen significant advances in modelling unsaturated soil behaviour. This paper presents a review of constitutive models for unsaturated soils. In particular, it focuses on the fundamental principles that govern the volume change, shear strength, yield stress, water retention and hydro-mechanical coupling. Alternative forms of these principles are critically examined in terms of their predictive capacity for experimental data, the consistency between these principles and the continuity between saturated and unsaturated states. 相似文献
9.
The finite‐element formulation and integration algorithms developed in Part I are used to analyse a number of practical problems involving unsaturated and saturated soils. The formulation and algorithms perform well for all the cases analysed, with the robustness of the latter being largely insensitive to user‐defined parameters such as the number of coarse time steps and error control tolerances. The efficiency of the algorithms, as measured by the CPU time consumed, does not depend on the number of coarse time steps, but may be influenced by the error control tolerances. Based on the analyses presented here, typical values for the error control tolerances are suggested. It is also shown that the constitutive modelling framework presented in Part I can, by adjusting one constitutive equation and one or two material parameters, be used to simulate soils that expand or collapse upon wetting. Treating the suction as a strain variable instead of a stress variable proves to be an efficient and robust way of solving suction‐dependent plastic yielding. Moreover, the concept of the constitutive stress is a particularly convenient way of handling the transition between saturation and unsaturation. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
10.
Generalization of soil–structure interface models from dry/saturated states to consider partially saturated states is studied in this paper. For this purpose, basic constitutive equations of a conventional elasto-plastic interface model are firstly presented. Then, consideration is given to the effect of partial saturation on definition of effective stress, location of the critical state line as well as the impact of interface state on plastic hardening modulus and dilatancy. For each concern, proper independent approaches together with associated constitutive equations are discussed to be included in the basic model as complementary ingredients. Among many different possibilities to combine complementary constitutive equations for effective stress, relocation of the critical state line with degree of saturation, and impact of the interface state on plastic hardening modulus and dilatancy, six essential cases are selected. Evaluations show that all six cases can realistically consider the impact of partial degree of saturation on the peak and residual shear strengths as well as the volume change behavior of unsaturated interfaces. 相似文献
11.
A thermodynamically consistent extension of the constitutive equations of saturated soils to unsaturated conditions is often worked out through the use of a unique ‘effective’ interstitial pressure, accounting equivalently for the pressures of the saturating fluids acting separately on the internal solid walls of the pore network. The natural candidate for this effective interstitial pressure is the space averaged interstitial pressure. In contrast experimental observations have revealed that, at least, a pair of stress state variables was needed for a suitable framework to describe stress–strain–strength behaviour of unsaturated soils. The thermodynamics analysis presented here shows that the most general approach to the behaviour of unsaturated soils actually requires three stress state variables: the suction, which is required to describe the invasion of the soil by the liquid water phase through the retention curve; two effective stresses, which are required to describe the soil deformation at water saturation held constant. However a simple assumption related to the plastic flow rule leads to the final need of only a Bishop-like effective stress to formulate the stress–strain constitutive equation describing the soil deformation, while the retention properties still involve the suction and possibly the deformation. Commonly accepted models for unsaturated soils, that is the Barcelona Basic Model and any approach based on the use of an effective averaged interstitial pressure, appear as special extreme cases of the thermodynamic formulation proposed here. 相似文献
12.
A constitutive model for dense gravelly soils was developed to reproduce their responses under cyclic loadings. Its application aims at nonlinear dynamic analyses of earth structures involving gravelly soils, such as rockfill dams and railroad ballasts. The framework of generalized plasticity was modified to incorporate the concept of stress distance for better simulation of unloading and reloading responses. It was then combined with the theory of critical state soil mechanics to develop the constitutive model. The model has the following important features: unified simulation of particle breakage through translating critical state line, smooth transition from unloading to reloading in the stress space, and proper modeling of cyclic hysteresis, cyclic densification, and cyclic hardening of dense gravelly soils. Most of the model parameters can be obtained through simple calculation using conventional triaxial test results, and their calibration process was discussed. The model was used to simulate the cyclic responses of three gravelly soils with satisfactory accuracy. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
13.
This paper reappraises Perzyna-type viscoplasticity for the constitutive modelling of granular geomaterials, with emphasis on the simulation of rate/time effects of different magnitude. An existing elasto-plastic model for sands is first recast into a Perzyna viscoplastic formulation and then calibrated/validated against laboratory test results on Hostun sand from the literature. Notable model features include (1) enhanced definition of the viscous nucleus function and (2) void ratio dependence of stiffness and viscous parameters, to model the pycnotropic behaviour of granular materials with a single set of parameters, uniquely identified against standard creep and triaxial test results. The comparison between experimental data and numerical simulations points out the predicative capability of the developed model and the complexity of defining a unique viscous nucleus function to capture sand behaviour under different loading/initial/boundary and drainage conditions. It is concluded that the unified viscoplastic simulation of both drained and undrained response is particularly challenging within Perzyna's framework and opens to future research in the area. The discussion presented is relevant, for instance, to the simulation of multiphase strain localisation phenomena, such as those associated to slope stability problems in variably saturated soils. 相似文献
14.
非饱和土广义有效应力原理 总被引：4，自引：1，他引：3
综述了非饱和土有效应力的沿革,并就非饱和土有效应力的研究和发展中存在的问题进行了讨论。基于多相孔隙介质理论推导得到的变形功的表达式,提出了非饱和土广义有效应力原理。该原理认为,由非饱和土中的单应力变量的有效应力或双应力变量理论很难唯一地确定非饱和土的变形和强度。广义有效应力原理实质上就是要综合考虑影响非饱和土变形和强度的三种广义应力以及与其对偶的广义变形,给出考虑因素更为全面、理论基础更为坚实的广义有效应力原理。它为非饱和土基本性质的研究和本构方程的建立奠定了坚实而科学的理论基础。 相似文献
15.
In the last decades, a number of hydro-mechanical elastoplastic constitutive models for unsaturated soils have been proposed. Those models couple the hydraulic and mechanical behaviour of unsaturated soils, and take into account the effects of the degree of saturation on the stress–strain behaviour and the effects of deformation on the soil–water characteristic response with a simple reversible part for the hysteresis. In addition, the influence of the suction on the stress–strain behaviour is considered. However, until now, few models predict the stress–strain and soil–water characteristic responses of unsaturated soils in a fully three-dimensional Finite Element code. This paper presents the predictions of an unsaturated soil model in a Three-dimensional Framework, and develops a study on the effect of partial saturation on the stability of shallow foundation resting on unsaturated silty soil. Qualitative predictions of the constitutive model show that incorporating a special formulation for the effective stress into an elastoplastic coupled hydro-mechanical model opens a full range of possibilities in modelling unsaturated soil behaviour. 相似文献
16.
A fundamental procedure is proposed for the identification of liquefaction in saturated soils based on the instability in the material's microstructure. The disturbed state concept (DSC) provides a unified constitutive model for the characterization of entire stress–strain behaviour under cyclic loading, and the values of disturbance at threshold states in the deforming microstructure provides the basis for the identification of liquefaction. The procedure is verified with respect to laboratory behaviour of two sands, saturated Ottawa and Reid Bedford. A mathematical analysis of the DSC constitutive matrix is also performed. Procedures for the application of the DSC for simplified analysis and design, and in finite element procedures are presented. It is believed that the proposed model can provide a fundamental yet simplified procedure for liquefaction analysis, and as a result, it is considered to be an improvement over the available empirical and energy-based procedures. © 1998 John Wiley & Sons, Ltd. 相似文献
17.
A simple method called anisotropic transformed stress (ATS) method is proposed to develop failure criteria and constitutive models for anisotropic soils. In this method, stress components in different directions are modified differently in order to reflect the effect of anisotropy. It includes two steps of mapping of stress. First, a modified stress tensor is introduced, which is a symmetric multiplication of stress tensor and fabric tensor. In the modified stress space, anisotropic soils can be treated to be isotropic. Second, a TS tensor is derived from the modified stress tensor for the convenience of developing anisotropic constitutive models to account for the effect of intermediate principal stress. By replacing the ordinary stress tensor with the TS tensor directly, the unified hardening model is extended to model the anisotropic deformation of soils. Anisotropic Lade's criterion is adopted for shear yield and shear failure in the model. The form of the original model formulations remains unchanged, and the model parameters are independent of the loading direction. Good agreement between the experimental results and predictions of the anisotropic unified hardening model is observed. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
18.
Compressibility behaviour of lime-stabilized clay 总被引：2，自引：1，他引：1
Lime stabilization reactions result in the formation of inter-particle cementation bonds that improves strength and reduce compressibility of clay soils. Though several studies in the past have focused on the impact of lime stabilization on the strength behaviour, few studies have examined the impact of lime stabilization on the compressibility behaviour of clay soils. The present study examines the compressibility behaviour of lime-stabilized soils in light of the frameworks proposed for saturated cemented clays. Cementation bonds formed during the lime stabilization reactions imparted yield stress in the range of 3900–5200 kPa to the artificially cemented specimens. The compression behaviour of these artificially cemented specimens in the pre-yield stress and post-yield stress regions conformed to the framework proposed for saturated cemented soils. 相似文献
19.
Matthieu Dumont Said Taibi Jean‐Marie Fleureau Nabil Abou‐Bekr Abdelghani Saouab 《国际地质力学数值与分析法杂志》2011,35(12):1299-1317
A simple thermo‐hydro‐mechanical (THM) constitutive model for unsaturated soils is described. The effective stress concept is extended to unsaturated soils with the introduction of a capillary stress. This capillary stress is based on a microstructural model and calculated from attraction forces due to water menisci. The effect of desaturation and the thermal softening phenomenon are modelled with a minimal number of material parameters and based on existing models. THM process is qualitatively and quantitatively modelled by using experimental data and previous work to show the application of the model, including a drying path under mechanical stress with transition between saturated and unsaturated states, a heating path under constant suction and a deviatoric path with imposed suction and temperature. The results show that the present model can simulate the THM behaviour in unsaturated soils in a satisfactory way. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
20.
In this research, the interfacial energy is taken into account in the deformation work for unsaturated soils. Based on porous media theory, the thermodynamic balance equations for each phase and the interface are used to derive the work input for unsaturated soils. The work input equation serves as the basis and starting point for the choice of stress state variables, based on which the conjugate stresses and strain increments are derived. The influences of the interfaces on the effective stress and the constitutive law for the liquid phase are then discussed based on the work input equation. The effective stress can be expressed as Bishop's type, and the effective stress parameter is shown to be a function of both the degree of saturation and the interfacial area. The constitutive law for the liquid phase under dynamic condition is also presented. The relationship among interfacial area, saturation, and capillary pressure is proposed to calculate the value of the effective stress. Experimental data obtained from literature are used to validate the proposed model equations. Results show that our findings are in accordance with the existing research. Unlike the phenomenal study, our research has a rigorous theoretical basis, which lays a foundation for further research of unsaturated soils considering the interfacial effects. 相似文献