共查询到20条相似文献，搜索用时 656 毫秒
1.
High‐pressure granulites are generally characterized by the absence of orthopyroxene. However, orthopyroxene is reported in a few high‐pressure, felsic–metapelitic granulites, such as the Huangtuling felsic high‐pressure granulite in the North Dabie metamorphic core complex in east‐central China, which rarely preserves the high‐pressure granulite facies assemblage of garnet + orthopyroxene + biotite + plagioclase + K‐feldspar + quartz. To investigate the effects of bulk‐rock composition on the stability of orthopyroxene‐bearing, high‐pressure granulite facies assemblages in the NCKFMASHTO (Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3) system, a series of P–T–X pseudosections based on the melt‐reintegrated composition of the Huangtuling felsic high‐pressure granulite were constructed. Calculations demonstrate that the orthopyroxene‐bearing, high‐pressure granulite facies assemblages are restricted to low XAl [Al2O3/(Na2O + CaO + K2O + FeO + MgO + Al2O3) < 0.35, mole proportion] or high XMg [MgO/(MgO + FeO) > 0.85] felsic–metapelitic rock types. This study also reveals that the XAl values in the residual felsic–metapelitic, high‐pressure granulites could be significantly reduced by a high proportion of melt loss. We suggest that orthopyroxene‐bearing, high‐pressure granulites occur in residual overthickened crustal basement under continental subduction–collision zones and arc–continent collision belts. 相似文献
2.
Mineral assemblages in Al2O3‐rich, SiO2‐ and K2O‐poor metapelitic rocks from the western Odenwald Crystalline Complex (Variscan Mid‐German Crystalline Rise, southern Germany) include corundum, spinel, cordierite, sillimanite, garnet and staurolite. Quartz is absent from almost all samples. Therefore, the applicability of conventional geothermobarometry is very limited or even impossible. Detailed petrographic investigation on selected samples permits inference of the sequence of appearance and disappearance of several mineral assemblages. The recognition of such partial re‐equilibration stages and their associated mineral assemblages, together with mineral stabilities predicted from KFMASH pseudosections, enables the determination of the pressure‐temperature (P–T) trajectories experienced by these rocks during the Variscan metamorphism. The rocks were metamorphosed under low‐P/high‐T conditions and underwent an anti‐clockwise P–T evolution. A pressure increase from about 2 kbar to 4 ± 0.5 kbar was accompanied by heating. Peak metamorphic conditions were reached at pressures of 4 ± 0.5 kbar and temperatures of at least 640 °C, probably even higher. The retrograde evolution is characterised by near‐isobaric cooling from ≥ 640 °C to approximately 550 °C. The rocks underwent the anti‐clockwise evolution in a subduction‐related magmatic arc setting. The close spatial association of the low‐P/high‐T rocks with recently discovered metabasic eclogites in the eastern part of the Odenwald Crystalline Complex may indicate a fossil paired metamorphic belt in the Central European Variscides. 相似文献
3.
Mineral textures in metapelitic granulites from the northern Prince Charles Mountains, coupled with thermodynamic modelling in the K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3 (KFMASHTO) model system, point to pressure increasing with increasing temperature on the prograde metamorphic path, followed by retrograde cooling (i.e. an anticlockwise P–T path). Textural evidence for the increasing temperature part of the path is given by the breakdown of garnet and biotite to form orthopyroxene and cordierite in sillimanite‐absent rocks, and through the break‐down of biotite and sillimanite to form spinel, cordierite and garnet in more aluminous assemblages. This is equated to the advective addition of heat from the regional emplacement of granitic and charnockitic magmas dated at c. 980 Ma. A subsequent increase in pressure, inferred from the break‐down of spinel and quartz to sillimanite, cordierite and garnet in aluminous rocks, is attributed to crustal thickening related to upright folding dated at 940–910 Ma. The terrane attained peak metamorphic temperatures of c. 880 °C at pressures of c. 6.0–6.5 kbar during this event. Subsequent cooling is inferred from the localised breakdown of cordierite and garnet to form biotite and sillimanite that developed in the latter stages of the same event. The textural observations described are interpreted via the application of P–T and P–T–X pseudosections. The latter show that most rock compositions preserve only fragments of the overall P–T path; a result of different rock compositions undergoing mineral assemblage changes, or changes in mineral modal abundance, on different sections of the P–T path. The results also suggest that partial melting during granulite facies metamorphism, coupled with melt loss and dehydration, initiated a switch from pervasive ductile, to discrete ductile/brittle deformation, during retrograde cooling. 相似文献
4.
A thermodynamic model for haplogranitic melts in the system Na2O–CaO–K2O–Al2O3–SiO2–H2O (NCKASH) is extended by the addition of FeO and MgO, with the data for the additional end‐members of the liquid incorporated in the Holland & Powell (1998) internally consistent thermodynamic dataset. The resulting dataset, with the software thermocalc , is then used to calculate melting relationships for metapelitic rock compositions. The main forms for this are P–T and T–X pseudosections calculated for particular rock compositions and composition ranges. The relationships in these full‐system pseudosections are controlled by the low‐variance equilibria in subsystems of NCKFMASH. In particular, the solidus relationships are controlled by the solidus relationships in NKASH, and the ferromagnesian mineral relationships are controlled by those in KFMASH. However, calculations in NCKFMASH allow the relationships between the common metapelitic minerals and silicate melt to be determined. In particular, the production of silicate melt and melt loss from such rocks allow observations to be made about the processes involved in producing granulite facies rocks, particularly relating to open‐system behaviour of rocks under high‐grade conditions. 相似文献
5.
The equilibrium coexistence of sapphirine + quartz is inferred to record temperatures in excess of 980 °C, based on the stability of this assemblage in the simplified chemical system FeO–MgO–Al2O3–SiO2 (FMAS) system. However, the potential for sapphirine to contain significant Fe3+ suggests that the stability of sapphirine + quartz could extend to lower temperatures than those constrained in this ideal system. The Wilson Lake terrane in the Grenville Province of central Labrador preserves sapphirine + quartz‐bearing assemblages in highly oxidized bulk compositions, and provides an opportunity to explore the stability of sapphirine + quartz in such rock compositions within the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (NCKFMASHTO) chemical system. Starting with the phase equilibria in FeO–MgO–Al2O3–SiO2–TiO2–O (FMASTO), expansion into K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (KFMASHTO) allows the effect of the stability of the additional phases, biotite, K‐feldspar and melt, on the stability of sapphirine + quartz to be assessed. These phase relations are evaluated generally using P–T projections, and the ultimate extension into NCKFMASHTO is done with pseudosections. Conditions of peak metamorphism in the Wilson Lake terrane are constrained using P–T pseudosections, and the appropriate H2O and O contents to use in the modelled compositions are investigated using T–MH2O and T–MO pseudosections. The peak P–T estimates from a sapphirine + quartz‐bearing sample are ～960 to 935 °C at ～10 to 8.6 kbar, similar to estimates from orthopyroxene + sillimanite + quartz ± garnet‐bearing samples. Whereas the sapphirine + quartz‐bearing sample is more Fe‐rich than the orthopyroxene + sillimanite‐bearing sample on an all‐Fe‐as‐FeO basis, once the oxidation state is taken into account, the former is effectively more magnesian than the latter, accounting for the sapphirine occurrence. 相似文献
6.
Improved activity–composition relationships for biotite, garnet and silicate liquid are used to construct updated P–T grids and pseudosections for high‐grade metapelites. The biotite model involves Ti charge‐balanced by hydrogen deprotonation on the hydroxyl site, following the substitution , where HD represents the hydroxyl site. Relative to equivalent biotite‐breakdown melting reactions in P–T grids in K2O–FeO–MgO–Al2O3–SiO2–H2O (KFMASH), those in K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O2 (KFMASHTO) occur at temperatures close to 50 °C higher. A further consequence of the updated activity models is that spinel‐bearing equilibria occur to higher temperature and higher pressure. In contrast, the addition of Na2O and CaO to KFMASH to make the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O (NCKFMASH) system lowers key biotite‐breakdown melting reactions in P–T space relative to KFMASH. Combination of the KFMASHTO and NCKFMASH systems to make Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O2 (NCKFMASHTO) results in key biotite‐breakdown melting reactions occurring at temperatures intermediate between those in KFMASHTO and those in NCKFMASH. Given such differences, the choice of model system will be critical to inferred P–T conditions in the application of mineral equilibria modelling to rocks. Further, pseudosections constructed in KFMASH, NCKFMASH and NCKFMASHTO for several representative rock compositions show substantial differences not only in the P–T conditions of key metamorphic assemblages but also overall topology, with the calculations in NCKFMASHTO more reliably reflecting equilibria in rocks. Application of mineral equilibria modelling to rocks should be undertaken in the most comprehensive system possible, if reliable quantitative P–T information is to be derived. 相似文献
7.
The metamorphosed mafic rocks of Archean greenstone belts host major orogenic gold deposits, and may record information about changing pressure–temperature (P–T) conditions that could contribute to understanding of Archean geodynamic processes. Until recently, it was difficult to obtain good constraints on pressure and temperature from these rocks. Here we present results of P–T pseudosection calculations in the NCFMASHTOS (Na2O–CaO–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O–SO2) system, using as an example typical amphibolite facies metabasaltic rocks from the Plutonic Gold Mine in the Neoarchean Plutonic Well Greenstone Belt (PWGB), Marymia Inlier, Western Australia. The pseudosections together with observed mineral compositions and mineral assemblages in the rocks are used to argue that a previously unrecognized steep pressure increase (from ～3–4 kbar at ～500 °C to ≥8 kbar at ～600 °C) accompanied metamorphism to peak temperatures. The P–T data presented here could be the result of either horizontal or vertical tectonics. Existing models for the early evolution of the PWGB involve nappe stacking supported by relatively cold strong crust, with little overall change in thickness. While the available evidence from the study area and the wider region is not yet sufficient to confirm whether the peak metamorphic conditions were attained by horizontal or vertical tectonic means, the P–T data presented here can provide region‐specific constraints for computer modelling that may provide a more definite answer in the future. 相似文献
8.
Kyanite‐bearing paragneisses from the Manicouagan Imbricate Zone and its footwall (high‐P belt of the central Grenville Province) preserve evidence of partial melting with development of metamorphic textures involving biotite–garnet ± kyanite ± plagioclase ± K‐feldspar–quartz. Garnet in these rocks displays a variety of zoning patterns with respect to Ca. Pseudosection modelling in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (NCKFMASHTO) system using measured bulk rock compositions accounts for the textural evolution of two aluminous and two sub‐aluminous samples from the presumed thermal peak to conditions at which retained melt solidified. The prograde features are best explained by pseudosections calculated with compositions to account for melt loss. The intersection of isopleths of grossular content and Fe/(Fe + Mg) relating to large porphyroblasts of garnet provide constraints on the P–T conditions of the metamorphic peak. These P–T estimates are considered to be minima because of the potential for diffusional modification of the composition of garnet at high‐T and during the early stages of cooling. However, they are consistent with textural observations and pseudosection topology, with peak assemblages best preserved in rocks for which the calculated pseudosections predict only small changes in mineral proportions in the P–T interval, in which retrograde reactions are inferred to have occurred between the thermal peak and the solidus. Maximum P–T conditions (14.5–15.5 kbar and 840–890 °C) and steep retrograde P–T paths inferred for rocks from the Manicouagan Imbricate Zone are comparable with those determined for mafic rocks from the same area. In contrast, maximum P–T conditions of 12.5–13 kbar and 815–830 °C and flatter P–T paths are inferred for the rocks of the footwall to the Manicouagan Imbricate Zone. The general consistency between textures, mineral compositions and the topologies of the calculated pseudosections suggests that the pseudosection approach is an appropriate tool for inferring the P–T evolution of high‐P anatectic quartzo‐feldspathic rocks. 相似文献
9.
Cordierite–orthoamphibole gneisses and rocks of similar composition commonly contain low‐variance mineral assemblages that can provide useful information about the metamorphic evolution of a terrane. New calculated petrogenetic grids and pseudosections are presented in the FeO–MgO–Al2O3–SiO2–H2O (FMASH), Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O (NCKFMASH) and Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3 (NCKFMASHTO) chemical systems to investigate quantitatively the phase relations in these rocks. Although the bulk compositions of cordierite–orthoamphibole gneisses are close to FMASH, calculations in this system do not adequately account for the observed range of mineral assemblages. Calculations in NCKFMASH and NCKFMASHTO highlight the role of minor constituents such as Ca, Na and Fe3+ in the mineral assemblage evolution of such rocks and these systems are more appropriate for interpreting the evolution of natural examples. 相似文献
10.
Eclogites from the south Tianshan, NW China are grouped into two types: glaucophane and hornblende eclogites, composed, respectively, of garnet + omphacite + glaucophane + paragonite + epidote + quartz and garnet + omphacite + hornblende (sensu lato) + paragonite + epidote + quartz, plus accessory rutile and ilmenite. These eclogites are diverse both in mineral composition and texture not only between the two types but also among the different selected samples within the glaucophane eclogite. Using thermocalc 3.1 and recent models of activity–composition relation for minerals, a P–T projection and a series of P–T pseudosections for specific samples of eclogite have been calculated in the system Na2O–CaO–FeO–MgO–Al2O3–SiO2–H2O (NCFMASH) with quartz and water taken to be in excess. On the basis of these phase diagrams, the phase relations and P–T conditions are well delineated. The three selected samples of glaucophane eclogite AK05, AK11 and AK17 are estimated to have peak P–T conditions, respectively, of 540–550 °C at c. 16 kbar, c. 560 °C at 15–17 kbar and c. 580 °C at 15–19 kbar, and two samples of hornblende eclogite AK10 and AK30 of 610–630 °C and 17–18 kbar. Together with H2O‐content contours in the related P–T pseudosections and textural relations, both types of eclogite are inferred to show clockwise P–T paths, with the hornblende eclogite being transformed from the glaucophane eclogite assemblage dominantly through increasing temperature. 相似文献
11.
Interpretations based on quantitative phase diagrams in the system CaO–Na2O–K2O–TiO2–MnO–FeO–MgO–Al2O3–SiO2–H2O indicate that mineral assemblages, zonations and microstructures observed in migmatitic rocks from the Beit Bridge Complex (Messina area, Limpopo Belt) formed along a clockwise P–T path. That path displays a prograde P–T increase from 600 °C/7.0 kbar to 780 °C/9–10 kbar (pressure peak) and 820 °C/8 kbar (thermal peak), followed by a P–T decrease to 600 °C/4 kbar. The data used to construct the P–T path were derived from three samples of migmatitic gneiss from a restricted area, each of which has a distinct bulk composition: (1) a K, Al‐rich garnet–biotite–cordierite–sillimanite–K‐feldspar–plagioclase–quartz–graphite gneiss (2) a K‐poor, Al‐rich garnet–biotite–staurolite–cordierite–kyanite–sillimanite–plagioclase–quartz–rutile gneiss, and (3) a K, Al‐poor, Fe‐rich garnet–orthopyroxene–biotite–chlorite–plagioclase–quartz–rutile–ilmenite gneiss. Preservation of continuous prograde garnet growth zonation demonstrates that the pro‐ and retrograde P–T evolution of the gneisses must have been rapid, occurring during a single orogenic cycle. These petrological findings in combination with existing geochronological and structural data show that granulite facies metamorphism of the Beit Bridge metasedimentary rocks resulted from an orogenic event during the Palaeoproterozoic (c. 2.0 Ga), caused by oblique collision between the Kaapvaal and Zimbabwe Cratons. Abbreviations follow Kretz (1983 ). 相似文献
12.
The Al–Mg-rich granulites from the In Ouzzal craton, Algeria, show a great diversity of mineral reactions which correspond to continuous equilibria as predicted by phase relationships in the FeO–MgO–Al2O3–SiO2 system. The sequence of mineral reactions can be subdivided into three distinct stages: (1) a high-P stage characterized by the growth of coarse mineral assemblages involving sapphirine and the disappearance of early corundum and spinel-bearing assemblages; (2) a high-T stage characterized by the development of Sa–Qz-bearing assemblages; and (3) a later stage, in which garnet-bearing assemblages are replaced by more or less fine symplectites involving cordierite. During the course of early mineral reactions, the distribution coefficient, Kd, between the various ferromagnesian phases decreased significantly whereas Al2O3 in pyroxene increased concomitantly. These observations, when combined with topological constraints, clearly indicate that the high-P stage 1 was accompanied by a significant rise in temperature (estimated at 150 ± 50° C) under near isobaric conditions, in agreement with the reaction textures. By stage 2, pressure and temperature were extreme as evidenced by the low Kd value between orthopyroxene and garnet (Kd= 2.06–1.99), the high alumina content in pyroxene (up to 11.8%) and the high magnesium content in garnet [100 Mg/(Mg + Fe) = 60.6]. Mineral thermometry based on Fe–Mg exchange between garnet and pyroxene and on Al-solubility in pyroxene gives temperatures close to 970 ± 70° C at 10 ± 1.5 kbar. These results are in agreement with the development of Sa–Qz assemblages on a local scale. Late mineral reactions have been produced during a decompression stage from about 9 to 6 kbar. Except for local re-equilibration of Mg and Fe at grain boundaries, there is no evidence for further reactions below 700° C. We interpreted the whole set of mineral reactions as due to changes in pressure and temperature during a tectonic episode located at c. 2 Ga. Because of the lack of evidence for further uplift after the thermal relaxation which occurred at c. 6 kbar, it is possible however that the exhumation of this granulitic terrane occurred in a later tectonic event unrelated to its formation. 相似文献
13.
J. A. BALDWIN R. POWELL M. BROWN R. MORAES R. A. FUCK 《Journal of Metamorphic Geology》2005,23(7):511-531
A new quantitative approach to constraining mineral equilibria in sapphirine‐bearing ultrahigh‐temperature (UHT) granulites through the use of pseudosections and compatibility diagrams is presented, using a recently published thermodynamic model for sapphirine. The approach is illustrated with an example from an UHT locality in the Anápolis–Itauçu Complex, central Brazil, where modelling of mineral equilibria indicates peak metamorphic conditions of about 9 kbar and 1000 °C. The early formed, coarse‐grained assemblage is garnet–orthopyroxene–sillimanite–quartz, which was subsequently modified following peak conditions. The retrograde pressure–temperature (P–T) path of this locality involves decompression across the FeO–MgO–Al2O3–SiO2 (FMAS) univariant reaction orthopyroxene + sillimanite = garnet + sapphirine + quartz, resulting in the growth of sapphirine–quartz, followed by cooling and recrossing of this reaction. The resulting microstructures are modelled using compatibility diagrams, and pseudosections calculated for specific grain boundaries considered as chemical domains. The sequence of microstructures preserved in the rocks constrains a two‐stage isothermal decompression–isobaric cooling path. The stability of cordierite along the retrograde path is examined using a domainal approach and pseudosections for orthopyroxene–quartz and garnet–quartz grain boundaries. This analysis indicates that the presence or absence of cordierite may be explained by local variation in aH2O. This study has important implications for thermobarometric studies of UHT granulites, mainly through showing that traditional FMAS petrogenetic grids based on experiments alone may overestimate P–T conditions. Such grids are effectively constant aH2O sections in FMAS‐H2O (FMASH), for which the corresponding aH2O is commonly higher than that experienced by UHT granulites. A corollary of this dependence of mineral equilibria on aH2O is that local variations in aH2O may explain the formation of cordierite without significant changes in P–T conditions, particularly without marked decompression. 相似文献
14.
《International Geology Review》2012,54(2):224-236
Reconstructing late Palaeozoic metamorphism of the Central Asian Orogenic Belt (CAOB) can provide a better understanding of how the CAOB formed. The petrology of sillimanite-bearing metapelitic schists from high-grade portions of the Permian Chinese Altai metamorphic belt (andalusite-type) reflects the effects of poorly understood high-T, low-P metamorphism. Phase equilibria modelling in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–TiO2–O (NCKFMASHTO) system restricts P–T conditions of the sillimanite schists to approximately 635–670°C at approximately 5.8–6.8 kbar. SHRIMP U–Pb analyses of zircon from the rocks yield a concordant age of 299.2 ± 3.4 Ma. Combined with the slightly younger (292.8 ± 2.3 Ma) areally restricted pelitic granulite with peak P?T conditions of approximately 780–800°C at approximately 5–6 kbar and high-T granulite with P?T conditions of approximately 860°C at approximately 6 kbar, these metamorphic rocks reflect prograde heating at relatively low pressure in early Permian time. Together with contemporary and widespread magmatic activities, they are best explained in the context of a post-orogenic extensional environment related to a mantle plume. 相似文献
15.
A petrogenetic grid in the model system CaO–FeO–MgO–Al2O3–SiO2–H2O is presented, illustrating the phase relationships among the minerals grunerite, hornblende, garnet, clinopyroxene, chlorite, olivine, anorthite, zoisite and aluminosilicates, with quartz and H2O in excess. The grid was calculated with the computer software thermocalc , using an upgraded version of the internally consistent thermodynamic dataset HP98 and non‐ideal mixing activity models for all solid solutions. From this grid, quantitative phase diagrams (P–T pseudosections) are derived and employed to infer a P–T path for grunerite–garnet‐bearing amphibolites from the Endora Klippe, part of the Venetia Klippen Complex within the Central Zone of the Limpopo Belt. Agreement between calculated and observed mineral assemblages and garnet zonation indicates that this part of the Central Zone underwent a prograde temperature and pressure increase from c. 540 °C/4.5 kbar to 650 °C/6.5 kbar, followed by a post‐peak metamorphic pressure decrease. The inferred P–T path supports a geotectonic model suggesting that the area surrounding the Venetia kimberlite pipes represents the amphibolite‐facies roof zone of migmatitic gneisses and granulites that occur widely within the Central Zone. In addition, the P–T path conforms to an interpretation that the Proterozoic evolution of the Central Zone was controlled by horizontal tectonics, causing stacking and differential heating at c. 2.0 Ga. 相似文献
16.
Using calculated chemical potential relationships to account for replacement of kyanite by symplectite in high pressure granulites 总被引：1，自引：0，他引：1 
下载免费PDF全文
下载免费PDF全文 Calculated mineral equilibria are used to account for the formation of sapphirine–plagioclase, spinel–plagioclase and corundum–plagioclase symplectites replacing kyanite in quartz–plagioclase–garnet–kyanite granulite facies gneisses from the Southern Domain of the Athabasca granulite terrane, a segment of the Snowbird tectonic zone in northern Saskatchewan, Canada. Metamorphic conditions of >14 kbar and 800 °C are established for the high pressure, garnet–kyanite assemblage using constraints from P–T pseudosections and Zr‐in‐rutile thermometry. Replacement of kyanite by symplectites reflects the reaction of kyanite with the matrix following near‐isothermal decompression to <10 kbar. The chemical potential gradients developed between the kyanite and the matrix led to diffusion that attempted to flatten the gradients, kyanite persisting as a stable phase while it is consumed by symplectite from its edge. In this local equilibrium model, the mineral and mineral compositional spatial relationships are shown to correspond to paths in μ(Na2O)–μ(CaO)–μ(K2O)–μ(FeO)–μ(MgO) in the model chemical system, Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2 (NCKFMAS), with SiO2 and Al2O3 taken to be completely immobile. The values of μ(Na2O) and μ(CaO) are constrained by fixing P–T conditions and choosing appropriate μ(Na2O) and μ(CaO) values that correspond to the observed plagioclase compositions. μ(FeO)–μ(MgO) diagrams show the corresponding spatial relationships with kyanite and the symplectite phases. These results demonstrate that the replacement of kyanite by sapphirine–plagioclase and spinel–plagioclase appears to be metastable with respect to replacement by corundum–plagioclase. Replacement by corundum–plagioclase does also occur, apparently overprinting pre‐existing symplectite and also kyanite. Ignoring corundum, the resulting diagrams account for the spatial relationships and compositions observed in the spinel–plagioclase and sapphirine–plagioclase symplectites. They are predicted to occur over both a wide range of P–T conditions (6–11 kbar, 650–850 °C) and plagioclase compositions (XAn = 0.5–0.9). The wide range of P–T conditions that may result in identical spatial and compositional relationships suggests that such reaction textures may be of limited use in accurately quantifying the P–T conditions of retrograde metamorphism. 相似文献
17.
Calculated phase equilibria for low- and medium-pressure metapelites in the KFMASH and KMnFMASH systems 总被引：14，自引：1，他引：14
Petrogenetic grids in the KFMASH and KMnFMASH model systems calculated with the software thermocalc 3.1 are presented for the P–T range 0.5–12 kbar and 450–900 °C, for assemblages involving garnet, muscovite, chloritoid, biotite, chlorite, staurolite, cordierite, spinel, orthopyroxene, K‐feldspar, Al2SiO5 phases, quartz, water and melt. Based on calculated compatibility diagrams and P–T and T–MMn [Mn/(Mg + Fe + Mn)] pseudosections for different metapelitic bulk compositions, the principal conclusions are that the addition of Mn to the KFMASH system: (i) enhances the stability of garnet, and, to a lesser extent, aluminosilicates; (ii) reduces the stability of staurolite, cordierite and, to a lesser extent, chlorite; and (iii) extends the medium pressure stability of muscovite and the low‐P stability field of K‐feldspar. The influence of Mn on individual mineral stabilities is strongly related to rock composition, in particular, to the relative contents of Al2O3 and K2O. For metapelites of a range of compositions and MMn values, P–T pseudosections in the KFMASH system, in most cases, do not adequately predict the mineral assemblages observed in natural assemblages under medium and low‐pressure conditions. In contrast, the P–T pseudosections in the KMnFMASH system generally provide more satisfactory results, suggesting that MnO is one of the non‐KFMASH components that should not be neglected in documenting the phase equilibria of medium‐ and low‐P metapelites. 相似文献
18.
Fe‐rich metapelitic granulites of the Musgrave Block, central Australia, contain several symplectic and coronal reaction textures that post‐date a peak S2 metamorphic assemblage involving garnet, sillimanite, spinel, ilmenite, K‐feldspar and quartz. The earliest reaction textures involve spinel‐ and quartz‐bearing symplectites that enclose garnet and to a lesser extent sillimanite. The symplectic spinel and quartz are in places separated by later garnet and/or sillimanite coronas. The metamorphic effects of a later, D3, event are restricted to zones of moderate to high strain where a metamorphic assemblage of garnet, sillimanite, K‐feldspar, magnetite, ilmenite, quartz and biotite is preserved. Quantitative mineral equilibria calculations in the system K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3 (KFMASHTO) using Thermocalc 3.0 and the accompanying internally consistent dataset provide important constraints on the influence of TiO2 and Fe2O3 on biotite‐bearing and spinel‐bearing equilibria, respectively. Biotite‐bearing equilibria are shifted to higher temperatures and spinel‐bearing equilibria to higher pressures and lower temperatures in comparison to the equivalent equilibria in K2O–FeO–MgO–Al2O3–SiO2–H2O (KFMASH). The sequence of reaction textures involving spinel is consistent with a D2 P–T path that involved a small amount of decompression followed predominantly by cooling within a single mineral assemblage stability field. Thus, the reaction textures reflect changes in modal proportions within an equilibrium assemblage rather than the crossing of a univariant reaction. The D3 metamorphic assemblage is consistent with lower temperatures than those inferred for D2. 相似文献
19.
Using a previously published, internally consistent thermodynamic dataset and updated models of activity–composition relations for solid solutions, petrogenetic grids in the model system KFMASH (K2O–FeO–MgO–Al2O3–SiO2–H2O) and the subsystems KMASH and KFASH have been calculated with the software THERMOCALC 3.1 in the P–T range 5–36 kbar and 400–810 °C, involving garnet, chloritoid, biotite, carpholite, talc, chlorite, staurolite and kyanite/sillimanite with phengite, quartz/coesite and H2O in excess. These grids, together with calculated AFM compatibility diagrams and pseudosections, are shown to be powerful tools for delineating the phase equilibria and P–T conditions of pelitic high-P assemblages for a variety of bulk compositions. The calculated equilibria and mineral compositions are in good agreement with petrological observation. The calculation indicates that the typical whiteschist assemblage kyanite–talc is restricted to the rocks with extremely high XMg values, decreasing XMg in a bulk composition favoring the stability of chloritoid and garnet. Also, the chloritoid–talc paragenesis is stable over 19–20 kbar in a temperature range of ca. 520–620 °C, being more petrologically important than the previously highlighted assemblage talc–phengite. Moreover, contours of the calculated Si isopleths in phengite in P–T and P–X pseudosections for different bulk compositions extend the experimentally derived phengite geobarometers to various KFMASH assemblages. 相似文献
20.
R. M. Palin M. R. St‐Onge D. J. Waters M. P. Searle B. Dyck 《Journal of Metamorphic Geology》2014,32(7):675-693
Phase equilibria modelling of post‐peak metamorphic mineral assemblages in (ultra)high‐P mafic eclogite from the Tso Morari massif, Ladakh Himalaya, northwest India, has provided new insights into the potential behaviour and source of metamorphic fluid during exhumation, and constrained the P–T conditions of hydration. A series of P–M(H2O) pseudosections constructed in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (NCKFMASHTO) system show that a number of petrographically distinct hydration episodes occurred during exhumation from peak P–T conditions (~640 °C, 27–28 kbar), resulting in the formation of abundant compositionally zoned amphibole and minor clinozoisite poikiloblasts at the expense of a peak assemblage dominated by garnet and omphacite. Initial hydration is interpreted to have occurred as a result of the destabilization of talc following isothermal decompression to ~23 kbar, which led to the formation of barroisite–winchite amphibole core domains. An episode of fluid infiltration from an external source at ~19 kbar, with or without syn‐decompressional cooling to ~560 °C, resulted in further barroisitic–winchitic amphibole growth, followed by the formation of clinozoisite poikiloblasts. Continued buoyancy‐driven exhumation to the base of the lower crust is constrained to have taken place with no additional fluid input. A final hydration event is characterized by the formation of magnesiohornblende rims on the barroisite–winchite cores, with the former interpreted to have formed during later prograde overprinting in the middle crust associated with the final stages of exhumation. Notably, the vast majority of externally sourced H2O, comprising just over half of the current bulk rock fluid content, was added during this later hydration event. In a middle crustal setting, this is interpreted as the result of devolatilization reactions occurring in migmatitic host orthogneiss and/or metasedimentary units, or following the crystallization of partial melt. 相似文献