首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 187 毫秒
1.
We document compositions of minerals and melts from 3 GPa partialmelting experiments on two carbonate-bearing natural lherzolitebulk compositions (PERC: MixKLB-1 + 2·5 wt% CO2; PERC3:MixKLB-1 + 1 wt% CO2) and discuss the compositions of partialmelts in relation to the genesis of alkalic to highly alkalicocean island basalts (OIB). Near-solidus (PERC: 1075–1105°C;PERC3: 1050°C) carbonatitic partial melts with <10 wt%SiO2 and 40 wt% CO2 evolve continuously to carbonated silicatemelts with >25 wt% SiO2 and <25 wt% CO2 between 1325 and1350°C in the presence of residual olivine, orthopyroxene,clinopyroxene, and garnet. The first appearance of CO2-bearingsilicate melt at 3 GPa is 150°C cooler than the solidusof CO2-free peridotite. The compositions of carbonated silicatepartial melts between 1350 and 1600°C vary in the rangeof 28–46 wt% SiO2, 1·6–0·5 wt% TiO2,12–10 wt% FeO*, and 19–29 wt% MgO for PERC, and42–48 wt% SiO2, 1·9–0·5 wt% TiO2,10·5–8·4 wt% FeO*, and 15–26 wt% MgOfor PERC3. The CaO/Al2O3 weight ratio of silicate melts rangesfrom 2·7 to 1·1 for PERC and from 1·7 to1·0 for PERC3. The SiO2 contents of carbonated silicatemelts in equilibrium with residual peridotite diminish significantlywith increasing dissolved CO2 in the melt, whereas the CaO contentsincrease markedly. Equilibrium constants for Fe*–Mg exchangebetween carbonated silicate liquid and olivine span a rangesimilar to those for CO2-free liquids at 3 GPa, but diminishslightly with increasing dissolved CO2 in the melt. The carbonatedsilicate partial melts of PERC3 at <20% melting and partialmelts of PERC at 15–33% melting have SiO2 and Al2O3 contents,and CaO/Al2O3 values, similar to those of melilititic to basaniticalkali OIB, but compared with the natural lavas they are moreenriched in CaO and they lack the strong enrichments in TiO2characteristic of highly alkalic OIB. If a primitive mantlesource is assumed, the TiO2 contents of alkalic OIB, combinedwith bulk peridotite/melt partition coefficients of TiO2 determinedin this study and in volatile-free studies of peridotite partialmelting, can be used to estimate that melilitites, nephelinites,and basanites from oceanic islands are produced from 0–6%partial melting. The SiO2 and CaO contents of such small-degreepartial melts of peridotite with small amounts of total CO2can be estimated from the SiO2–CO2 and CaO–CO2 correlationsobserved in our higher-degree partial melting experiments. Thesesuggest that many compositional features of highly alkalic OIBmay be produced by 1–5% partial melting of a fertile peridotitesource with 0·1–0·25 wt% CO2. Owing to verydeep solidi of carbonated mantle lithologies, generation ofcarbonated silicate melts in OIB source regions probably happensby reaction between peridotite and/or eclogite and migratingcarbonatitic melts produced at greater depths. KEY WORDS: alkali basalts; carbonated peridotite; experimental petrology; ocean island basalts; partial melting  相似文献   

2.
Four natural peridotite nodules ranging from chemically depletedto Fe-rich, alkaline and calcic (SiO2=43?7–45?7 wt. percent, Al2O3=1?6O–8?21 wt. per cent, CaO=0?70–8?12wt. per cent,alk=0?10–0?90 wt. per cent and Mg/(Mg+Fe2+)=0?94–0?85)have been investigated in the hypersolidus region from 800?to 1250?C with variable activities of H2O, CO2, and H2. Thevapor-saturated peridotite solidi are 50–200?C below thosepreviously published. The temperature of the beginning of meltingof peridotite decreases markedly with decreasing Mg/(Mg+Fe)of the starting material at constant CaO/Al2O3. Conversely,lowering CaO/Al2O3 reduces the temperature at constant Mg/(Mg+Fe)of the starting material. Temperature differences between thesolidi up to 200?C are observed. All solidi display a temperatureminimum reflecting the appearance of garnet. This minimum shiftsto lower pressure with decreasing Mg/(Mg+Fe) of the startingmaterial. The temperature of the beginning of melting decreasesisobarically as approximately a linear function of the mol fractionof H2O in the vapor (XH2O). The data also show that some CO2may dissolve in silicate melts formed by partial melting ofperidotite. Amphibole (pargasitic hornblende) is a hypersolidus mineralin all compositions, although its P/T stability field dependson bulk rock chemistry. The upper pressure stability of amphiboleis marked by the appearance of garnet. The vapor-saturated (H2O) liquidus curve for one peridotiteis between 1250? and 1300?C between 10 and 30 kb. Olivine, spinel,and orthopyroxene are either liquidus phases or coexist immediatelybelow the temperature of the peridotite liquidus. The data suggest considerable mineralogical heterogeneity inthe oceanic upper mantle because the oceanic geotherm passesthrough the P/T band covering the appearance of garnet in variousperidotites. The variable depth to the low-velocity zone is explained byvariable aH2O conditions in the upper mantle and possibly alsoby variations in the composition of the peridotite itself. It is suggested that komatiite in Precambrian terrane couldform by direct melting of hydrous peridotite. Such melting requiresabout 1250?C compared with 1600?C which is required for drymelting. The genesis of kimberlite can be related to partial meltingof peridotite under conditions of (). Such activities of H2Oresult in melting at depths ranging between 125 and 175 km inthe mantle. This range is within the minimum depth generallyaccepted for the formation of kimberlite.  相似文献   

3.
Four natural peridotite nodules ranging from chemically depletedto Fe-rich, alkaline and calcic (SiO2 = 43.7–45.7 wt.per cent, A12O3 = 1.6O–8.21 wt. per cent, CaO = 0.70–8.12wt. per cent, alk = 0.10–0.90 wt. per cent and Mg/(Mg+Fe2+)= 0.94–0.85) have been investigated in the hypersolidusregion from 800? to 1250?C with variable activities of H2O,CO2, and H2. The vapor-saturated peridotite solidi are 50–200?Cbelow those previously published. The temperature of the beginningof melting of peridotite decreases markedly with decreasingMg/(Mg+SFe) of the starting material at constant CaO/Al2O3.Conversely, lowering CaO/Al2O3 reduces the temperature at constantMg/(Mg+Fe) of the starting material. Temperature differencesbetween the solidi up to 200?C are observed. All solidi displaya temperature minimum reflecting the appearance of garnet. Thisminimum shifts to lower pressure with decreasing Mg/(Mg + Fe)of the starting material. The temperature of the beginning ofmelting decreases isobarically as approximately a linear functionof the mol fraction of H2O in the vapor (XH2Ov). The data alsoshow that some CO2 may dissolve in silicate melts formed bypartial melting of peridotite. Amphibole (pargasitic hornblende) is a hypersolidus mineralin all compositions, although its P/T stability field dependson bulk rock chemistry. The upper pressure stability of amphiboleis marked by the appearance of garnet. The vapor-saturated (H2O) liquidus curve for one peridotiteis between 1250? and 1300?C between 10 and 30 kb. Olivine, spinel,and orthopyroxene are either liquidus phases or co-exist immediatelybelow the temperature of the peridotite liquidus. The data suggest considerable mineralogical heterogeneity inthe oceanic upper mantle because the oceanic geotherm passesthrough the P/T band covering the appearance of garnet in variousperidotites. The variable depth to the low-velocity zone is explained byvariable aHjo conditions in the upper mantle and possibly alsoby variations in the composition of the peridotite itself. Itis suggested that komatiite in Precambrian terrane could formby direct melting of hydrous peridotite. Such melting requiresabout 1250?C compared with 1600?C which is required for drymelting. The genesis of kimberlite can be related to partial meltingof peridotite under conditions of XH2Ov = 0.5–0.25 (XCO2v= 0.5–0.75). Such activities of H2O result in meltingat depths ranging between 125 and 175 km in the mantle. Thisrange is within the minimum depth generally accepted for theformation of kimberlite.  相似文献   

4.
Liquidus relations in the four-component system Na2O–Al2O3–SiO2–F2O–1were studied at 0· 1 and 100 MPa to define the locationof fluoride–silicate liquid immiscibility and outlinedifferentiation paths of fluorine-bearing silicic magmas. Thefluoride–silicate liquid immiscibility spans the silica–albite–cryoliteand silica–topaz–cryolite ternaries and the haplogranite-cryolitebinary at greater than 960°C and 0· 1–100 MPa.With increasing Al2O3 in the system and increasing aluminum/alkalication ratio, the two-liquid gap contracts and migrates fromthe silica liquidus to the cryolite liquidus. The gap does notextend to subaluminous and peraluminous melt compositions. Forall alkali feldspar–quartz-bearing systems, the miscibilitygap remains located on the cryolite liquidus and is thus inaccessibleto differentiating granitic and rhyolitic melts. In peralkalinesystems, the magmatic differentiation is terminated at the albite–quartz–cryoliteeutectic at 770°C, 100 MPa, 5 wt % F and cation Al/Na =0· 75. The addition of topaz, however, significantlylowers melting temperatures and allows strong fluorine enrichmentin subaluminous compositions. At 100 MPa, the binary topaz–cryoliteeutectic is located at 770°C, 39 wt % F, cation Al/Na 0·95, and the ternary quartz–topaz–cryolite eutecticis found at 740°C, 32 wt % F, 30 wt % SiO2 and cation Al/Na 0· 95. Such location of both eutectics enables fractionationpaths of subaluminous quartz-saturated systems to produce fluorine-rich,SiO2-depleted and nepheline-normative residual liquids. KEY WORDS: silicate melt; granite; rhyolite; fluorine; liquid immiscibility  相似文献   

5.
The system peridotite-H2O–CO2 serves as a simplified modelfor the phase relations of mantle peridotite involving morethan one volatile component. Run products obtained in a studyof phase relations of four mantle peridotites in the presenceof H2O- and (H2O+CO2)- bearing vapors and with controlled hydrogenfugacity (fH2) at high pressures and temperatures have beensubjected to a detailed chemical investigation, principallyby the electron microprobe. Mg/(Mg+Fe) of all phases generally increases with increasingtemperature and with increasing Mg/(Mg+Fe) of the starting material.This ratio appears to decrease with increasing pressure forolivine, and for amphibole coexisting with garnet. DecreasingfH2 from that of IW buffer to that of MH buffer decreases Mg/(Mg+Fe)of the partial melt from approximately 0-85 to approximately0.50, whereas the Fo content of coexisting olivine increasesslightly less than 3 per cent and the Mg/(Mg+Fe) of clinopyroxeneincreases about 4 per cent. However, the variations in Fo contentof olivines are within those observed in olivines from naturalmantle peridotite. The chemistry of other silicate mineralsdoes not significantly reflect variations of fH2. Consequently,the peridotite mineralogy and/or chemistry is not a good indicatorfor the fH2 conditions during crystallization. All crystalline phases, except amphibole, and to some extentgarnet, show increasing Cr content with increasing temperatureand increasing Cr content of the starting material, resultingin a positive correlation with Mg/(Mg+Fe). Partial melts aredepleted in Cr2O3 relative to the crystalline phases. High Mg/Mg+Fe)and Cr2O3 are thus expected in crystal residues after partialmelting. The absolute values depend on degree of melting andthe composition of the parent peridotite. Liquids formed by anatexis of mantle peridotite are andesiticunder conditions of XH2Ov > 0.6 to at least 25 kb total pressureand to more than 200?C above the peridotite solidus. This observationsupports numerous suggestions that andesite genesis in islandarcs may result from partial melting of underlying peridotitemantle. In contrast to basaltic rocks, the absence of amphibole(paragasitic hornblende) does not affect the silica-saturatednature of the liquids. Increasing K2O content of the startingmaterial (up to 1 wt. per cent K2O) results in increasing potassiumcontent of the amphibole (1 wt. per cent K2O) as well as theappearance of phlogopite. The liquid under these conditionsis relatively K20-poor (less than 1 wt. per cent K2O). Partial melts are olivine normative with XH2O 0.5, and initialliquids contain normative ol and ne at XH2O 0.4. The alkalinityof these liquids increases with decreasing XH2O below valuesof 0.5. The (ol+opx)-normative liquids resemble oceanic basaltswhereas (ol+ne)-normative liquids resemble olivine nepheliniteand melilite basalt. Low aHlo and high aCo2 conditions may bethose under which kimberlites and related rocks are formed inthe mantle.  相似文献   

6.
A suite of dolerite dykes from the Ahlmannryggen region of westernDronning Maud Land (Antarctica) forms part of the much moreextensive Karoo igneous province of southern Africa. The dykecompositions include both low- and high-Ti magma types, includingpicrites and ferropicrites. New 40Ar/39Ar age determinationsfor the Ahlmannryggen intrusions indicate two ages of emplacementat 178 and 190 Ma. Four geochemical groups of dykes have beenidentified in the Ahlmannryggen region based on analyses of60 dykes. The groups are defined on the basis of whole-rockTiO2 and Zr contents, and reinforced by rare earth element (REE),87Sr/86Sr and 143Nd/144Nd isotope data. Group 1 were intrudedat 190 Ma and have low TiO2 and Zr contents and a significantArchaean crustal component, but also evidence of hydrothermalalteration. Group 2 dykes were intruded at 178 Ma; they havelow to moderate TiO2 and Zr contents and are interpreted tobe the result of mixing of melts derived from an isotopicallydepleted source with small melt fractions of an enriched lithosphericmantle source. Group 3 dyke were intruded at 190 Ma and formthe most distinct magma group; these are largely picritic withsuperficially mid-ocean ridge basalt (MORB)-like chemistry (flatREE patterns, 87Sr/86Sri 0·7035, Ndi 9). However, theyhave very high TiO2 (4 wt %) and Zr (500 ppm) contents, whichis not consistent with melting of MORB-source mantle. The Group3 magmas are inferred to be derived by partial melting of astrongly depleted mantle source in the garnet stability field.This group includes several high Mg–Fe dykes (ferropicrites),which are interpreted as high-temperature melts. Some Group3 dykes also show evidence of contamination by continental crust.Group 4 dykes are low-K picrites intruded at 178 Ma; they havevery high TiO2–Zr contents and are the most enriched magmagroup of the Karoo–Antarctic province, with ocean-islandbasalt (OIB)-like chemistry. Dykes of Group 1 and Group 3 aresub-parallel (ENE–WSW) and both groups were emplaced at190 Ma in response to the same regional stress field, whichhad changed by 178 Ma, when Group 2 and Group 4 dykes were intrudedalong a dominantly NNE–SSW strike. KEY WORDS: flood basalt; depleted mantle; enriched mantle; Ahlmannryggen; Karoo dyke  相似文献   

7.
We have determined the near-solidus melt compositions for peridotiteMM-3, a suitable composition for the production of mid-oceanridge basalt (MORB) by decompression partial melting, at 1 and1·5 GPa. At 1 GPa the MM-3 composition has a subsolidusplagioclase-bearing spinel lherzolite assemblage, and a solidusat 1270°C. At only 5°C above the solidus, 4% meltis present as a result of almost complete melting of plagioclase.This melting behaviour in plagioclase lherzolite is predictedfrom simple systems and previous experimental work. The persistenceof plagioclase to > 0·8 GPa is strongly dependenton bulk-rock CaO/Na2O and normative plagioclase content in theperidotite. At 1·5 GPa the MM-3 composition has a subsolidusspinel lherzolite assemblage, and a solidus at 1350°C.We have determined a near-solidus melt composition at 2% meltingwithin 10°C of the solidus. Near-solidus melts at both 1and 1·5 GPa are nepheline normative, and have low normativediopside contents; also they have the highest TiO2, Al2O3 andNa2O, and the lowest FeO and Cr2O3 contents compared with higherdegree partial melts. Comparison of these near-solidus meltswith primitive MORB glasses, which lie in the olivine-only fieldof crystallization at low pressure, indicate that petrogeneticmodels involving aggregation of near-fractional melts formedduring melting at pressures of 1·5 GPa or less are unlikelyto be correct. In this study we use an experimental approachthat utilizes sintered oxide mix starting materials and peridotitereaction experiments. We also examine some recent studies usingan alternative approach of melt migration into, and entrapmentwithin ‘melt traps’ (olivine, diamond, vitreouscarbon) and discuss optimal procedures for this method. KEY WORDS: experimental petrology; mantle melting; near-solidus; fertile peridotite; MORB  相似文献   

8.
The Tertiary to Recent basalts of Victoria and Tasmania havemineralogical and major element characteristics of magmas encompassingthe range from quartz tholeiites to olivine melilitites. Abundancesof trace elements such as incompatible elements, including therare earth elements (REE), and the compatible elements Ni, Coand Sc, vary systematically through this compositional spectrum.On the basis of included mantle xenoliths, appropriate 100 Mg/Mg+ Fe+2 (68–72) and high Ni contents many of these basaltsrepresent primary magmas (i.e., unmodified partial melts ofmantle peridotite). For fractionated basalts we have derivedmodel primary magma compositions by estimating the compositionalchanges caused by fractional crystallization of olivine andpyroxene at low or moderate pressure. A pyrolite model mantlecomposition has been used to establish and evaluate partialmelting models for these primary magmas. By definition and experimentaltesting the specific pyrolite composition yields parental olivinetholeiite magma similar to that of KilaeauIki, Hawaii (1959–60)and residual harzburgite by 33 per cent melting. It is shownthat a source pyrolite composition differing only in having0.3–0.4 per cent TiO2 rather than 0.7 per cent TiO2, isable to yield the spectrum of primary basalts for the Victorian-Tasmanianprovince by 4 per cent to 25 per cent partial melting. The mineralogiesof residual peridotites are consistent with known liquidus phaserelationships of the primary magmas at high pressures and thechemical compositions of residual peridotite are similar tonatural depleted or refractory lherzolites and harzburgites.For low degrees of melting the nature of the liquid and of theresidual peridotite are sensitively dependent on the contentof H2O, CO2 and the CO2/H2O in the source pyrolite. The melting models have been tested for their ability to accountfor the minor and trace element, particularly the distinctivelyfractionated REE, contents of the primary magmas. A single sourcepyrolite composition can yield the observed minor and traceelement abundances (within at most a factor of 2 and commonlymuch closer) for olivine melilitite (4–6 per cent melt),olivine nephelinite, basanite (5–7 per cent melt), alkaliolivine basalt (11–15 per cent melt), olivine basalt andolivine tholeiite (20–25 per cent melt) provided thatthe source pyrolite was already enriched in strongly incompatibleelements (Ba, Sr, Th, U, LREE) at 6–9 x chondritic abundancesand less enriched (2.5–3 x chondrites) in moderately incompatible(Ti, Zr, Hf, Y, HREE) prior to the partial melting event. Thesources regions for S.E. Australian basalts are similar to thosefor oceanic island basalts (Hawaii, Comores, Iceland, Azores)or for continental and rift-valley basaltic provinces and verydifferent in trace element abundances from the model sourceregions for most mid-ocean ridge basalts. We infer that thismantle heterogeneity has resulted from migration within theupper mantle (LVZ or below the LVZ) of a melt or fluid (H2O,CO2-enriched) with incompatible element concentrations similarto those of olivine melilitite, kimberlite or carbonatite. Asa result of this migration, some mantle regions are enrichedin incompatible elements and other areas are depleted. Although it is possible, within the general framework of a lherzolitesource composition, to derive the basanites, olivine nephelinitesand olivine melilitites from a source rock with chondritic relativeREE abundances at 2–5 x chondritic levels, these modelsrequire extremely small degrees of melting (0.4 per cent forolivine melilitite to 1 per cent for basanite). Furthermore,it is not possible to derive the olivine tholeiite magmas fromsource regions with chondritic relative REE abundances withoutconflicting with major element and experimental petrology argumentsrequiring high degrees (15 per cent) of melting and the absenceof residual garnet. If these arguments are disregarded, andpartial melting models are constrained to source regions withchondritic relative REE abundances, then magmas from olivinemelilitites to olivine tholeiites can be modelled if degreesof melting are sufficiently small, e.g., 7 per cent meltingfor olivine tholeiite. However, the source regions must be heterogenousfrom 1 to 5 x chondritic in absolute REE abundances and heterogerieousin other trace elements as well. This model is rejected in favorof the model requiring variation in degree of melting from 4per cent to 25 per cent and mantle source regions ranging fromLREE-enriched to LREE-depleted relative to chondritic REE abundances.  相似文献   

9.
HOLTZ  F.; BARBEY  P. 《Journal of Petrology》1991,32(5):959-978
The Tourem granitic complex (North Portugal) consists of quartz-and alkali-feldspar-rich felsic granites, biotite- and plagioclase-richheterogeneous granites, and cordierite-biotite granites, containingnumerous enclaves of orthogneisses and metapelitic schists.Mineralogical, chemical, and experimental data suggest thatall the granites and the orthogneiss enclaves are geneticallyrelated. The felsic granites are characterized by normally zoned plagioclase,absence of cordierite, high SiO2 and K2O (72–74 wt.% and5?4–6?4 wt.%, respectively), moderate P2O5 and REE (0?22–0?24%and 85?0–95?7 ppm), and low Fe2O3* and Zr contents (1?3–1?5%and 80–90 ppm). These features are consistent with thoseof restite-free melts formed by low extents of melting. Meltingexperiments show that these felsic granites are likely to bederived by melting of a source material similar to the orthogneissenclaves under low water activities (0?5), at relatively hightemperature ( 800?C) and <30% melting. The heterogeneous and cordierite-biotite granites display highcordierite contents (up to 30%) in addition to biotite (5–25%),complexly zoned plagioclase, and high Fe2O3 (2?72–6?99%),CaO (0?56–1?95%), Zr (101–213 ppm), and Ce (39?8–98?1ppm) contents, suggesting that the melts contained significantproportions of residual biotite, cordierite, plagioclase, andaccessories. Experimental data indicate that the melts weregenerated under water-undersaturated conditions but by higherextents of melting (30–60% melting) with probably a largeramount of available water compared with the felsic granites. The major and trace element chemical trends of the granites,which do not define single arrays on two-element variation diagrams,and experimental data show that the generation of the Touremanatectic complex cannot be explained by the restite unmixingmodel but could have resulted from sequential low extents ofmelting with efficient melt segregation followed by higher extentsof melting with restite retention.  相似文献   

10.
A combination of major and trace element, whole-rock Sr, Ndand Hf isotope, and zircon U–Pb isotopic data are reportedfor a suite of dolerite dikes from the Liaodong Peninsula inthe northeastern North China Craton. The study aimed to investigatethe source, petrogenesis and tectonic setting of the dikes.Sensitive high-resolution ion microprobe U–Pb zircon analysesyield a Late Triassic emplacement age of 213 Ma for these dikes,post-dating the collision between the North China and Yangtzecratons and consequent ultrahigh-pressure metamorphism. Threegeochemical groups of dikes have been identified in the LiaodongPeninsula based on their geochemical and Sr–Nd–Hfisotope characteristics. Group 1 dikes are tholeiitic, withhigh TiO2 and total Fe2O3 and low MgO contents, absent to weaknegative Nb and Ta anomalies, variable (87Sr/86Sr)i (0·7060–0·7153),Nd(t) (– 0·8 to –6·5) and Hf(t) (–2·7to –7·8) values, and negative Hf(t) (–1·1to –7·8). They are inferred to be derived frompartial melting of a relatively fertile asthenospheric mantlein the spinel stability field, with some upper crustal assimilationand fractional crystallization. Group 2 dikes have geochemicalfeatures of high-Mg andesites with (87Sr/86Sr)i values of 0·7063–0·7072,and negative Nd(t) (–3·0 to –9·5)and Hf(t) (–3·2 to –10·1) values,and may have originated as melts of foundered lower crust, withsubsequent interaction with mantle peridotite. Group 3 dikesare shoshonitic in composition with relatively low (87Sr/86Sr)ivalues (0·7061–0·7063), and negative Nd(t)(–13·2 to –13·4) and Hf(t) (–11·0to –11·5) values, and were derived by partial meltingof an ancient, re-enriched, refractory lithospheric mantle inthe garnet stability field. The geochemical and geochronologicaldata presented here indicate that Late Triassic magmatism occurredin an extensional setting, most probably related to post-orogeniclithospheric delamination. KEY WORDS: mafic dike; asthenospheric mantle; lithospheric mantle; delamination; North China Craton  相似文献   

11.
Mount Galunggung is a historically active volcano in southwesternJava that has erupted four times in the last two centuries.During the most recent event, which occurred during a 9–monthinterval in 1982– 83, some 305 106 m3 of medium–K,calc–alkaline magma was erupted. This eruption was unusualbecause of its duration, the diversity of eruption dynamicsand products, and the range of lava compositions produced. Thecomposition of juvenile material changed gradually during thecourse of the eruption from initial plagioclase (An60–75)and two–pyrozene bearing andesites with 58% SiO2 to finalplagioclase (An85–90), diopside, and olivine (Fo85–90)bearing primitive magnesium basalts with 47% SiO2 Mineralogicaland compositional relationships indicate a magmatic evolutioninvolving differentitation of high–Mg parental melt. Theeruptive volumes of 35 106 m3 andesite, 120 106 m3 maficandesite, and 150 106 m3 basalt are consistent with the ideathat the 1982– 83 eruption progressively tapped and draineda magma chamber that had become chemically stratified throughextensive crystal fractionation. Separates of plagioclase and pyroxene have 18O( SMO W) rangesof + 5. 6 to + 6.0 and + 5.3 to + 5.6, respectively, with 18Oplag–pxvalues of + 0.4 to + 0.6o, indicating internal O–isotopeequiliburium at temperature of 1100–850 C. The magenesianbasalts have magmatic 18O/ 16O ratios similar to those of mid–oceanridge basalt, and the O–isotope ratios of compositionallyevolved derivative melts show no evidence for contaminationof the galunggung magmas by 18O–rich crust during differentiation.Andesites and transitional mafic and sites have a more variableO–isotope character, with laves and phenocrysts havingboth higher and lower 18O values than observed in the parentalmagnesium basalts. These features are interpreted to reflectintramagma chamber processes affecting the upper portions ofthe differentiating Galunggung magma body before the 1982–83eruption.  相似文献   

12.
Major- and trace-element data on the constituent minerals ofgarnet peridotite xenoliths hosted in early Paleozoic (457–500Ma) kimberlites and Neogene (16–18 Ma) volcanic rockswithin the North China Craton are compared with those from thepre-pilot hole of the Chinese Continental Scientific DrillingProject (CCSD-PP1) in the tectonically exhumed Triassic (220Ma) Sulu ultrahigh-pressure (UHP) terrane along its southernmargin. P–T estimates for the Paleozoic and Neogene peridotitexenoliths reflect different model geotherms corresponding tosurface heat flows of 40 mW/m2 (Paleozoic) and 80 mW/m2 (Neogene).Garnet peridotite xenoliths or xenocrysts from the Paleozoickimberlites are strongly depleted, similar to peridotites fromother areas of cratonic mantle, with magnesium olivine (meanFo92.7), Cr-rich garnet and clinopyroxene with high La/Yb. Garnet(and spinel) peridotite xenoliths hosted in Neogene basaltsare derived from fertile mantle; they have high Al2O3 and TiO2contents, low-Mg-number olivine (mean Fo89.5), low-Cr garnetand diopside with flat rare earth element (REE) patterns. Thedifferences between the Paleozoic and Neogene xenoliths suggestthat a buoyant refractory lithospheric keel present beneaththe eastern North China Craton in Paleozoic times was at leastpartly replaced by younger, hotter and more fertile lithosphericmantle during Mesozoic–Cenozoic times. Garnet peridotitesfrom the Sulu UHP terrane have less magnesian olivine (Fo91.5),and lower-Cr garnet than the Paleozoic xenoliths. The diopsideshave low heavy REE (HREE) contents and sinusoidal to light REE(LREE)-enriched REE patterns. These features, and their highMg/Si and low CaO and Al2O3 contents, indicate that the CCSD-PP1peridotites represent a moderately refractory mantle protolith.Details of mineral chemistry indicate that this protolith experiencedcomplex metasomatism by asthenosphere-derived melts or fluidsin Mesoproterozoic, and subsolidus re-equilibration involvingfluids/melts derived from the subducted Yangtze continentalcrust during UHP metamorphism in the early Mesozoic. Tectonicextension of the subcontinental lithospheric mantle of the NorthChina Craton and exhumation of the Sulu UHP rocks in the earlyMesozoic induced upwelling of the asthenosphere. Peridotitessampled by the Neogene basalts represent newly formed lithospherederived by cooling of the upwelling asthenospheric mantle inJurassic–Cretaceous and Paleogene time. KEY WORDS: garnet peridotite xenoliths; North China Craton; lithospheric thinning; Sulu UHP terrane; UHP lithosphere evolution; mantle replacement  相似文献   

13.
Equilibrium crystallization experiments at atmospheric pressureand over a range of oxygen fugacity (fO2) have been carriedout on a ferro-basaltic composition similar to liquids proposedto have been parental to much of the exposed portion of theSkaergaard intrusion. Before Fe-Ti oxide saturation the liquidline of descent is little affected by fO2. However, the appearancetemperatures of the magnetite-ulvspinel solid solution (Mt)and the ilmenite-haematite solid solution (Ilm) depend stronglyon fO2. Above the fayalite-magnetite-quartz (FMQ) buffer Mtis the first oxide phase to appear on the liquidus, but belowthe FMQ buffer Ilm is the first oxide to crystallize. The appearancetemperature of Mt is 1100C at FMQ and the Mt liquidus slopeis 30C/log fO2 unit between FMQ–;2 and FMQJ+1. The Ilmliquidus is at 1100C between FMQ and FMQ–2, but movesto lower temperature at higher fO2 where Mt is the first oxidephase. The results indicate that the ferric iron content ofMt-saturated melts varies linearly with inverse temperature,and that Ilm saturation is closely related to melt TiO2 content.Mt saturation produces an immediate enrichment of SiO2 and depletionin FeO* in the melt phase, whereas Ilm saturation produces similarenrichment in SiO2, but inn enrichment may continue for 10Cbelow the ilmenite liquidus. The experimental liquids reacha maximum of 18 wt% FeO*, at 48 wt% SiO2 for ilmenite-saturatedmelts at low fO2, more differentiated melts having lower ironand higher silica. Cotectic proportions, derived from mass balancecalculations, are in good agreement with data from natural samplesand other experimental studies. Olivine resorption is inferredat all fO2, with the onset of resorption occurring 10C higherthan the appearance of magnetite. The effect of fO2 on silicatemineral compositions, and partitioning of elements between coexistingmineral-melt pairs, is small. Thermodynamic considerations suggestthat variations of Fe-Mg partitioning between the iron-richolivines, pyroxenes and melts produced in this study may beexplained by known non-idealities of Fe-Mg mixing in the crystallinephases, rather than nonidealities in the coexisting melts. Theseexperiments also provide insights into many features commonto natural tholeiitic series of volcanic and plutonic rocks,and provide experimental data required for modelling of fractionalcrystallization and crystallization closed to oxygen, processeswhich are not easily investigated experimentally. KEY WORDS: ferro-basalt; Fe-Ti oxides; oxygen fugacity; Skaergaard intrusion; iron enrichment *Corresponding author. Present address: Bayerisches Geoinstitut, Univerritt Bayreuth, D-95440 Bayreuth, Germany  相似文献   

14.
The system peridotite-H2O-CO2 serves as a simplified model forthe phase relations of mantle peridotite involving more thanone volatile component. Run products obtained in a study ofphase relations of four mantle peridotites in the presence ofH2O- and (H2O+CO2)-bearing vapors and with controlled hydrogenfugacity (fH2) at high pressures and temperatures have beensubjected to a detailed chemical investigation, principallyby the electron microprobe. Mg/(Mg+Fe) of all phases generally increases with increasingtemperature and with increasing Mg/(Mg+Fe) of the starting material.This ratio appears to decrease with increasing pressure forolivine, and for amphibole coexisting with garnet. DecreasingfH2from that of IW buffer to that of MH buffer decreases Mg/(Mg+Fe)of the partial melt from approximately 0?85 to approximately0?50, whereas the Fo content of coexisting olivine increasesslightly less than 3 per cent and the Mg/(Mg+Fe) of clinopyroxeneincreases about 4 per cent. However, the variations in Fo contentof olivines are within those observed in olivines from naturalmantle peridotite. The chemistry of other silicate mineralsdoes not significantly reflect variations of fH2. Consequently,the peridotite mineralogy and/or chemistry is not a good indicatorfor the fH2 conditions during crystallization. All crystalline phases, except amphibole, and to some extentgarnet, show increasing Cr content with increasing temperatureand increasing Cr content of the starting material, resultingin a positive correlation with Mg/(Mg+Fe). Partial melts aredepleted in Cr2O3 relative to the crystalline phases. High Mg/(Mg+Fe)and Cr2O3 are thus expected in crystal residues after partialmelting. The absolute values depend on degree of melting andthe composition of the parent peridotite.  相似文献   

15.
Bulk-rock geochemical compositions of hypabyssal kimberlites,emplaced through the Archaean Kaapvaal craton and ProterozoicNamaqua–Natal belt, are used to estimate close-to-primarymagma compositions of Group I kimberlites (Mg-number = 0·82–0·87;22–28 wt % MgO; 21–30 wt % SiO2; 10–17 wt% CaO; 0·2–1·7 wt % K2O) and Group II kimberlites(Mg-number = 0·86–0·89; 23–29 wt %MgO; 28–36 wt % SiO2; 8–13 wt % CaO; 1·6–4·6wt % K2O). Group I kimberlites are distinguished from GroupII by their lower Ba/Nb (<12), Th/Nb (<1·1) andLa/Nb (<1·1) but higher Ce/Pb (>22) ratios. Thedistinct rare earth element patterns of the two types of kimberlitesindicate a more highly metasomatized source for Group II kimberlites,with more residual clinopyroxene and less residual garnet. Thesimilarity of Sr and Nd isotope ratios and diagnostic traceelement ratios (Ce/Pb, Nb/U, La/Nb, Ba/Nb, Th/Nb) of Group Ikimberlites to ocean island basalts (OIB), but more refractoryMg-numbers and Ni contents, are consistent with derivation ofGroup I kimberlites from subcontinental lithospheric mantle(SCLM) that has been enriched by OIB-like melts or fluids. Sourceenrichment ages and plate reconstructions support a direct associationof these melts or fluids with Mesozoic upwelling beneath southernAfrica of a mantle plume(s), at present located beneath thesouthern South Atlantic Ocean. In contrast, the geochemicalcharacteristics of both on- and off-craton Group II kimberlitesshow strong similarity to calc-alkaline magmas, particularlyin their Nb and Ta depletion and Pb enrichment. It is suggestedthat Group II kimberlites are derived from both Archaean andProterozoic lithospheric mantle source regions metasomatizedby melts or fluids associated with ancient subduction events,unrelated to mantle plume upwelling. The upwelling of mantleplumes beneath southern Africa during the Mesozoic, at the timeof Gondwana break-up, may have acted as a heat source for partialmelting of the SCLM and the generation of both Group I and GroupII kimberlite magmas. KEY WORDS: kimberlite; geochemistry; petrogenesis; mantle plumes; South Africa  相似文献   

16.
The caldera-forming 26·5 ka Oruanui eruption (Taupo,New Zealand) erupted 530 km3 of magma, >99% rhyolitic, <1%mafic. The rhyolite varies from 71·8 to 76·7 wt% SiO2 and 76 to 112 ppm Rb but is dominantly 74–76 wt% SiO2. Average rhyolite compositions at each stratigraphiclevel do not change significantly through the eruption sequence.Oxide geothermometry, phase equilibria and volatile contentsimply magma storage at 830–760°C, and 100–200MPa. Most rhyolite compositional variations are explicable by28% crystal fractionation involving the phenocryst and accessoryphases (plagioclase, orthopyroxene, hornblende, quartz, magnetite,ilmenite, apatite and zircon). However, scatter in some elementconcentrations and 87Sr/86Sr ratios, and the presence of non-equilibriumcrystal compositions imply that mixing of liquids, phenocrystsand inherited crystals was also important in assembling thecompositional spectrum of rhyolite. Mafic compositions comprisea tholeiitic group (52·3–63·3 wt % SiO2)formed by fractionation and crustal contamination of a contaminatedtholeiitic basalt, and a calc-alkaline group (56·7–60·5wt % SiO2) formed by mixing of a primitive olivine–plagioclasebasalt with rhyolitic and tholeiitic mafic magmas. Both maficgroups are distinct from other Taupo Volcanic Zone eruptivesof comparable SiO2 content. Development and destruction by eruptionof the Oruanui magma body occurred within 40 kyr and Oruanuicompositions have not been replicated in vigorous younger activity.The Oruanui rhyolite did not form in a single stage of evolutionfrom a more primitive forerunner but by rapid rejuvenation ofa longer-lived polygenetic, multi-age ‘stockpile’of silicic plutonic components in the Taupo magmatic system. KEY WORDS: Taupo Volcanic Zone; Taupo volcano; Oruanui eruption; rhyolite, zoned magma chamber; juvenile mafic compositions; eruption withdrawal systematics  相似文献   

17.
We have conducted experiments on dissolution of quartz, albite,orthoclase, and corundum into H2O-saturated haplogranite meltat 800°C and 200 MPa over a duration of 120–1488 hwith the aim of ascertaining the diffusive transport propertiesof granitic melts at crustal anatectic temperatures. Cylindersof anhydrous starting glass and a single mineral phase (quartzor feldspar) were juxtaposed along flat and polished surfacesinside gold or platinum capsules with 10 wt % added H2O. Concentrationprofiles in glass (quenched melt) perpendicular to the mineral–glassinterfaces and comparison with relevant phase diagrams suggestthat melts at the interface are saturated in the dissolvingphases after 384 h, and with longer durations the concentrationprofiles are controlled only by diffusion of components in themelt. The evolution of the concentration profiles with timeindicates that uncoupled diffusion in the melt takes place alongthe following four linearly independent directions in oxidecomposition space: SiO2, Na2O, and K2O axes (Si-, Na-, and K-eigenvectors,respectively), and a direction between the Al2O3, Na2O, andK2O axes (Al-eigenvector), such that the Al/Na molar ratio isequal to that of the bulk melt and the Al/(Na + K) molar ratiois equal to the equilibrium ASI (= mol. Al2O3/[Na2O + K2O])of the melt. Experiments in which a glass cylinder was sandwichedbetween two mineral cylinders—quartz and albite, quartzand K-feldspar, or albite and corundum—tested the validityof the inferred directions of uncoupled diffusion and exploredlong-range chemical communication in the melt via chemical potentialgradients. The application of available solutions to the diffusionequations for the experimental quartz and feldspar dissolutiondata provides diffusivities along the directions of the Si-eigenvectorand Al-eigenvector of (2·0–2·8) x 10–15m2/s and (0·6–2·4) x 10–14 m2/s, respectively.Minimum diffusivities of alkalis [(3–9) x 10–11m2/s] are orders of magnitude greater than the tetrahedral componentsof the melt. The information provided here determines the rateat which crustal anatexis can occur when sufficient heat issupplied and diffusion is the only mass transport (mixing) processin the melt. The calculated diffusivities imply that a quartzo-feldspathicsource rock with initial grain size of 2–3 mm undergoinghydrostatic, H2O-saturated melting at 800°C (infinite heatsupply) could produce 20–30 vol. % of homogeneous meltin less than 1–10 years. Slower diffusion in H2O-undersaturatedmelts will increase this time frame. KEY WORDS: chemical diffusion; haplogranite; mineral dissolution experiments; crustal anatexis  相似文献   

18.
A phase of Mesozoic extension associated with the terminationof continental collision at the southern margin of the AldanShield produced ultrabasic lamproites in a discontinuous belt500 km long and 150 km wide. The lamproites, locally poorlydiamondiferous, were emplaced as dykes, sills and pipes. AllAldan lamproites have primitive chemical characteristics (e.g.MgO up to 22·7 wt %) and are ultrapotassic (K2O up to8·3 wt %) and peralkaline with K2O + Na2O/Al2O3 in therange 0·6–1·16. A distinctive feature ofthese rocks is their low TiO2 content (0·5–1·4wt %). Aldan lamproites are moderately light rare earth element(LREE) enriched with (La/Yb)N ranging from 10 to 47. Heavy rareearth element (HREE) abundances are lower than for all otherlamproites by up to a factor of five. Therefore, the combinedmajor and trace element characteristics of the Aldan samplesare not typical of other lamproite occurrences. Large ion lithophileelement concentrations are high (100–800 x Primitive Mantle)but the high field strength elements (HFSE; Nb, Ta, Ti) plusTh and U display unusually low concentrations for rocks of thistype. The style of trace element enrichment recorded by theAldan Shield lamproites is comparable with that of subduction-relatedmagmatism. The Aldan lamproites have among the most extremeinitial isotopic ratios yet recorded from mantle-derived magmas;Ndi = –10·3 to –22·3, 87Sr/86Sri =0·7055–0·7079, Hfi = –7·6 to–29·4 and 206Pb/204Pbi = 16·6–17·4.When interpreted in terms of multi-stage Pb isotope evolution,the Pb isotope data require fractionation from a Bulk Earthreservoir at 3·0 Ga and subsequent evolution with second-stageµ values between 6·4 and 8·0. The inferredArchaean age of the lamproite source is consistent with Nd andHf model ages, which range from 1·5 to 3·0 Ga.Aldan lamproites have Hf values that range from +3 to –7.Trace element and Sr–Nd–Pb–Hf isotopic ratiosshow coherent variations that suggest that Archaean source enrichmentproduced the negative Hf as a result of metasomatism by slab-derivedhydrous melts that left rutile–garnet-bearing residua.We conclude that relatively large degrees of partial meltingproduced the lamproites (>5%), which explains the preservationof the isotope–trace element correlations and the lowREE contents. Although high-quality trace element data (e.g.HFSE) are not available for most lamproites, it appears thatmany of their source regions contain a component of recycledoceanic crust, possibly including subducted sediment. The sourcesof the Aldan and many other lamproites are distinct from oceanisland basalt mantle sources. This suggests that the long-termstorage of trace element enriched lamproite sources occurredin the sub-continental lithospheric mantle and not at depthwithin the convecting asthenosphere. KEY WORDS: potassic volcanism; isotope geochemistry; fluid enrichment  相似文献   

19.
The melting relations of two proposed crustal source compositionsfor rhyolitic magmas of the Taupo Volcanic Zone (TVZ), New Zealand,have been studied in a piston-cylinder apparatus at 10 kb totalpressure and a range of water activities generated by H2O-CO2vapour. Starting materials were glasses of intermediate composition(65 wt.% Si02 representing a metaluminous ‘I-type’dacite and a peraluminous ‘S-type’ greywacke. Crystallizationexperiments were carried out over the temperature range 675to 975?C, with aH2O values of approximately 1?0, 0?75, 0?5,and 0?25. Talc-pyrex furnace assemblies imposed oxygen fugacitiesclose to quartz-fayalite-magnetite buffer conditions. Assemblages in both compositions remain saturated with quartzand plagioclase through 675–700?C at high aH2O, 725–750?Cat aH2O0?5, and 800–875?C at aH2O0?25, corresponding to<60–70% melting. Concentrations of refractory mineralcomponents (Fe, Mg, Mn, P, Ti) in liquids increase throughoutthis melting interval with increasing temperature and decreasingaH2O. Biotite and hornblende are the only mafic phases presentnear the solidus in the dacite, compared with biotite, garnet,gedritic orthoamphibole, and tschermakitic clinoamphibole inthe greywacke. Near-solidus melting reactions are of the type:biotite + quartz + plagioclase = amphibole ? garnet, potentiallyreleasing H2O for dehydration melting in the greywacke, butproducing larger amounts of hornblende and releasing littleH2O in the dacite. At aH2O0?25 and temperatures 825–850?C,amphibole dehydration produces anhydrous mineral phases typicalof granulite fades assemblages (clinopyroxene, orthopyroxene,plagioclase?quartz in the dacite; garnet, orthopyroxene, plagioclase?quartzin the greywacke) coexisting with melt proportions as low as40%. Hornblendce-saturated liquids in the dacite are weaklyperaluminous (0?3–1?6 wt.% normative C—within therange of peraluminous TVZ rhyolites), whereas, at aH2O0?25 andtemperatures 925?C, metaluminous partial melt compositions (upto 1?8 wt.% normative Di) coexist with plagioclase, orthopyroxene,and clinopyroxene. At all water activities, partial melts ofthe greywacke are uniformly more peraluminous (1?5–2?6wt.% normative C), reflecting their saturation in the componentsof more aluminous mafic minerals, particularly garnet and Al-richorthopyroxene. A metaluminous source for the predominantly Di-normativeTVZ rhyolites is therefore indicated. With decreasing aH2O the stability fields of plagioclase andquartz expand, whereas that of biotite contracts. These changesare reflected in the proportions of normative salic componentsin partial melts of both the dacite and greywacke. At high aH2O,partial melts are rich in An and Ab and poor in Or (trondhjemitic-tonalitic);with decreasing aH2O they become notably poorer in An and richerin Or (granodioritic-granitic). These systematic variationsin salic components observed in experimental metaluminous tostrongly peraluminous melts demonstrate that a wide varietyof granitoid magmas may be produced from similar source rocksdepending upon P-T-aH2O conditions attending partial melting.Some peraluminous granitoids, notably trondhjemitic leucosomesin migmatites, and sodic granodiorites and granites emplacedat deep crustal levels, have bulk compositions similar to nearsolidus melt compositions in both the dacite and greywacke,indicating possible derivation by anatexis without the involvementof a significant restite component.  相似文献   

20.
MYSEN  BJORN 《Journal of Petrology》1992,33(2):347-375
The solubility mechanisms of H2O in peralkaline sodium aluminosilicatequenched melts (anhydrous NBO/T = 0.5) have been studied withRaman spectroscopy as a function of Al/(Al + Si) (0–0–3)and H2O content (0–7.5 wt.%). The coexisting structuralunits in the anhydrous quenched melts are TO2 (Q4), T2O5(Q3),and TO3 (Q2). In Al-free Na2Si4O9 (NS4) melt, H2O forms complexes with Na+(Na–OH bonds) and with Si4+ (Si–OH bonds). MolecularH2O is also detected. TO3 structural units are not detectedin this composition. In the H2O concentration range between0 and 4 wt.%, there is an approximately 20% increase in NBO/Tresulting from the increased abundance ratio, T2O5/TO2. Withfurther increments in water activity, the NBO/T of hydrous NS4melt is reduced. The depolymerization results from hydroxylationof the silica tetrahedra, whereas polymerization is due to formationof complexes with Na–OH bonding. In Al-bearing compositions on the Na2Si4O9–Na2(NaAl)4O9–join, there is evidence for Al–OH bonding in additionto Na–OH and Si–OH bonds. Among these complexes,the relative abundance of those with Si–OH bonds diminisheswith increasing Al/(A1 + Si), whereas complexes with Al–OHand Na–OH bonds become more important. Complexes withNa–OH bonds dominate for H2O4 wt.%, whereas complexeswith Al–OH dominate at higher water content. The threestructural units, TO3, T2O5, and TO2, were observed in bothanhydrous and hydrous peralkaline sodium aluminosilicate melts.Their abundance varies, however, with the H2O concentrationin the melts. The NBO/T decreases to a minimum (a 30–50%lowering of NBO/T relative to anhydrous materials) for low H2Ocontents (3–4 wt.% H2O), and increases as the H2O contentis increased further.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号