首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Two oolites in the Dinantian (Mississippian/Lower Carboniferous) of Glamorgan, SW Britain, were deposited in similar depositional environments but have contrasting diagenetic histories. The Brofiscin and Gully Oolites occur in the upper parts of shallowing-upward sequences, formed through strandplain progradation and sand shoal and barrier growth upon a southward-dipping carbonate ramp. The Brofiscin Oolite is characterized by a first-generation cement of equant calcite spar, preferentially located at grain-contacts and forming non-isopachous fringes around grains, interpreted as meteoric vadose and phreatic in origin. Isopachous fibrous calcite fringes of marine origin are rather rare and occur only at a few horizons. Burial compaction was not important and porosity was occluded by poikilotopic calcite spar. Fitted grain-grain contacts locally occur and could be the result of near-surface vadose dissolution-compaction. Syntaxial overgrowths on echinoderm debris are common. Pre-compaction overgrowths are cloudy (inclusion-rich) and probably of meteoric origin, and post-compaction overgrowths are inclusion-free. By contrast, the Gully Oolite has little first-generation cement. However, marine fibrous calcite is common in oolitic intraclasts, as isopachous fringes of acicular calcite crystals closely associated with peloidal internal sediment; and early equant, drusy calcite spar occurs in the uppermost part of the Gully, beneath a prominent palaeokarst where pedogenic cements also occur. The major feature of Gully diagenesis is burial compaction, resulting in extensive grain-grain dissolution and microstylolitic grain contacts, and post-compaction poikilotopic spar occluded remaining porosity. The Brofiscin Oolite is pervasively dolomitized up-dip but the Gully Oolite for the most part only contains scattered pre-compaction dolomite rhombs and late veins of baroque dolomite, with less pervasive dolomitization. The difference in diagenetic style of the two Dinantian oolites is attributed to prevailing climate. The paucity of early meteoric cements in the Gully is a result of an arid climate, and this is supported by the nature of the capping palaeokarst. The abundant meteoric cements in the Brofiscin reflect a more humid climate, and effective meteoric recharge also resulted in up-dip pervasive mixing-zone dolomitization. The style of early diagenesis in these two oolites exerted a major control on the later burial diagenesis: in the Brofiscin, the early cements inhibited grain-grain dissolution and pressure solution, while these processes operated extensively in the Gully Oolite. Thus, prevailing climate can influence a limestone's diagenetic history from near-surface through into deep burial.  相似文献   

2.
《Sedimentary Geology》2001,139(3-4):285-317
Petrographic and geochemical data from five localities in the Ziz Valley of Morocco indicate that Jurassic limestones have undergone early diagenesis that varied with location from shelf to basinal settings, burial diagenesis that was most pronounced in basinal settings, and late diagenesis caused by compression and uplift of the High Atlas Mountains.Marine cements occur at all five localities from shelf-to-basin center, although cement types vary from peloidal microcrystalline cements updip on the shelf-to-equant calcite in basinal settings. Presence of moldic grains and/or Mg-poor, Fe-poor blocky cements suggest that meteoric waters influenced early diagenesis at all shelf localities and on an upturned fault block in the basinal region, leaving only one locality unaffected by early meteoric processes. 87Sr/86Sr ratios of 0.70810–0.70895 (greater than 87Sr/86Sr of coeval limestones), Mg contents that decrease upward from 47.5 to 43.0 mol% MgCO3, presence of dolomitized marine cements, and dolomite cements that postdate marine cements but predate meteoric-to-burial cements suggest that dolomitization and dolomite cementation at two shelf localities took place in mixed meteoric and marine waters early in diagenesis. However, poorer preservation of depositional fabrics, lower δ18O values, and larger and more anhedral crystals suggest that dolostones downdip underwent later modification during burial, whereas those updip did not.Compaction during diagenesis generated numerous concavo–convex and sutured intergranular contacts at updip shelf, downdip shelf, and basinal localities where earlier meteoric cementation was not extensive. Compaction was insignificant in more extensively cemented mid-shelf settings. High Sr (1200–3800 ppm) and Fe (1000–2300 ppm) contents in brachiopod grains suggest that LMC components underwent some modification during burial in basinal settings in Sr-rich reducing waters. Fe contents of late intergranular cements increase from 2000 ppm at the basin's edge to as much as 6000 ppm in the basin's center. Bedding-parallel stylolites occur at all localities.The most negative δ18O values of sparry dolomites near the Tizi n'Firest fault (−6.2‰ vs. PDB) imply diagenetic temperatures of 65–85°C assuming water δ18O values of 0.0–2.0‰ vs. SMOW. Those temperatures are much less than previous estimates of burial temperatures in the High Atlas basin. An isotopic gradient extrapolating to roughly 5‰/km in diagenetically modified dolostones likewise suggests a geothermal gradient less than gradients previously proposed for at least parts of the area.Comparison of morphologies of transverse stylolites, which are found at all localities, with morphologies of bedding parallel stylolites suggests that transverse stylolites formed due to compression during late diagenesis. Uplift accompanying that compression allowed influx of low-Mg waters that, along with other factors, caused calcitization of dolomites. The Fe concentration of calcite that fills late fractures increases from less than 2000 ppm at the basin center to values in excess of 3000 ppm at the basin edge, opposite trends in earlier cements and reflecting uplift of the High Atlas Mountains and resultant changes in patterns of groundwater flow.  相似文献   

3.
The sandbodies of the Bearreraig Sandstone Formation (Inner Hebrides, UK) are cemented by two generations of calcite. The first generation, an inhomogeneous ferroan calcite (0.05?3.28 mol% FeCo3) formed during sulphate reduction (δ13C =?24 to ?32%o PDB) in marine porewaters (δ18O of cement from ?1 to ?4%o PDB) at very shallow burial depths (a few centimetres). These cements are rare but form millimetre-scale clusters of crystals which acted as nuclei to the later, concretionary cements. The second generation of cements are more homogeneous ferroan calcites (mean 1?58% mol% FeCo3) which evolve to progressively higher Fe/Mg ratios. They are sourced by shell dissolution (δ13C of cement from +1 to ?3%o PDB) into meteoric (δ18O of cement from ?6 to ?10%o PDB) or mixed marine meteoric waters (δ18O of cement from ?4 to ?6%o SMOW). These were introduced into the formation either during Bathonian times as a freshwater lens, or, subsequent to partial inversion, by confined aquifer flow. Corroded feldspars within the concretions suggest that an interval of at least 8 Ma separated the deposition of the sediments from the onset of concretion growth. Abundant concretions are preferentially developed at certain horizons within the sandbodies, where the early generation of ferroan calcite cements provided nuclei. The latter formed close to the sediment-water interface, the concentration of cement within the sediment being related to sedimentation rate. The relatively high concentrations of the first generation of cement, upon which the concretionary horizons are nucleated, formed during periods of minimal sedimentation.  相似文献   

4.
Lower Cretaceous sandstones of the Qishn Formation have been studied by integrating sedimentological, petrological and petrophysical analyses from wells in the Masila oilfields of eastern Yemen. These analyses were used to define the origin, type of diagenesis and its relation to reservoir quality. The sandstones of the Qishn Formation are predominately quartz arenite to subarkose arenite with sublitharenite and quartz wackes displaying a range of porosities, averaging 22.33%. Permeability is likewise variable with an average of 2844.2 mD. Cementation coupled with compaction had an important effect on porosity destruction after sedimentation and burial. The widespread occurrence of early calcite cement suggests that the sandstones of the Qishn Formation lost significant primary porosity at an early stage of its diagenetic history. In addition to poikilotopic calcite, several different cements including kaolinite, illite, chlorite and minor illite–smectite occur as pore‐filling and pore‐lining cements, which were either accompanied by or followed the development of the early calcite cement. Secondary porosity development occurred due to partial to complete dissolution of early calcite cements and feldspar grains. The new data presented in this paper suggest the reservoir quality of Qishn sandstones is strongly linked to their diagenetic history; hence, the reservoir quality is reduced by clay minerals, calcite and silica cements but is enhanced by the dissolution of the unstable grains, in addition to partial or complete dissolution of calcite cements and unstable grains. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

5.
The carbonate platforms of the Wetterstein Formation of the Eastern Alps (Drau Range and Northern Calcareous Alps) show a distinct facies zonation of reefs and lagoons. While some lagoonal areas were episodically emerged and formed lagoonal islands, others remained permanently flooded. The scale of near surface, meteoric or marine diagenesis was related to this lagoonal topography. At shallow burial depth, cementation was dominated by altered marine solutions, which additionally caused recrystallization of metastable constituents of the sediment and earlier marine cements (high magnesian calcite, aragonite) connected with a carbon and oxygen isotopic change to more negative values. Deeper burial cementation shows a succession with two types of saddle dolomite and three types of blocky calcite. Carbon and oxygen isotopic values of these cements show a trend towards more negative values from the first to the last generation, in the following succession: clear saddle dolomite—zoned blocky calcite—cloudy saddle dolomite—post-corrosion blocky calcite—replacive blocky calcite. Fluid inclusion studies of the carbonate cements are interpreted to indicate a deeper burial temperature development that first increases from 175 to 317°C, followed by a temperature decrease to 163–260°C, and subsequent increase up to 316°C, whereby the samples of the Drau Range always show the lowest values. Calculations of the isotopic composition of the water, from which the carbonate cements were precipitated, yielded positive δ18O values from 6.66 to 17.81%o (SMOW), which are characteristic for formation and/or metamorphic waters. Also, the isotopic compositions of the palaeofluids probably changed during deeper burial diagenesis, following the temperature development.  相似文献   

6.
The Pennsylvanian phylloid algal mounds exposed in the Cervatina Limestone of the Cantabrian Zone (NW Spain) developed during the highstands of high-frequency shallowing-upward cycles and lack evidence of subaerial exposure at their tops. Mound core facies are composed of massive bafflestones with variable amounts of calcite cements and anchicodiacean phylloid algae with cyathiform thalli preserved in growth position. Through standard petrographic, isotopic (δ18O and δ13C), major and trace element (Ca, Mg, Fe, Mn, Sr) and cathodoluminescence analyses, five calcite cement phases (cement 1 (C1)–cement 5 (C5)) have been identified filling primary and secondary pores. Early marine diagenesis is represented by micritization and non-luminescent to mottled-dull luminescent high-Mg calcite fibrous marine cement (C1). A dissolution phase then occurred and created vuggy and moldic pores. Based on the absence of field or petrographical or geochemical evidence of exposure, it is inferred that dissolution occurred in near-surface undersaturated marine waters with respect to aragonite related to progressive organic matter oxidation. Secondary porosity was subsequently filled by dull-bright-dull bladed high-Mg calcite (C2), which precipitated in the early shallow burial from marine-derived pore waters. Remaining porosity was occluded by shallow-burial precipitates consisting of non-luminescent scalenohedral low-Mg calcite (C3) followed by non-ferroan dull luminescent calcite spar (C4). Latter phases of calcite spar exhibiting non- and dull luminescence (C5) are associated with burial calcite veins. Low δ18O values (around ?8‰), moderately depleted δ13C values (around 0.5‰) and the homogeneity of trace element contents of carbonate matrix, cements and vein-filling calcites suggest burial isotopic re-equilibration and recrystallization, probably in Early Permian times during post-thrusting orocline formation.  相似文献   

7.
S.J. MAZZULLO 《Sedimentology》2006,53(5):1015-1047
Lithostratigraphy, depositional facies architecture, and diagenesis of upper Pliocene to Holocene carbonates in northern Belize are evaluated based on a ca 290 m, continuous section of samples from a well drilled on Ambergris Caye that can be linked directly to outcrops of Pleistocene limestone, and of overlying Holocene sediments. Upper Pliocene outer‐ramp deposits are overlain unconformably by Pleistocene and Holocene reef‐rimmed platforms devoid of lowstand siliciclastics. Tectonism controlled the location of the oldest Pleistocene platform margin and coralgal barrier reef, and periodically affected deposition in the Holocene. A shallow, flat‐topped, mostly aggradational platform was maintained in the Holocene by alternating periods of highstand barrier‐reef growth and lowstand karstification, differential subsidence, and the low magnitude of accommodation space increases during highstands. Facies in Pleistocene rocks to the lee of the barrier reef include: (i) outer‐shelf coralgal sands with scattered coral patch reefs; (ii) a shoal–water transition zone comprising nearshore skeletal and oolitic sands amidst scattered islands and tidal flats; and (iii) micritic inner‐shelf deposits. Four glacio‐eustatically forced sequences are recognized in the Pleistocene section, and component subtidal cycles probably include forced cycles and autocycles. Excluding oolites, Holocene facies are similar to those in the Pleistocene and include mud‐mounds, foraminiferal sand shoals in the inner shelf, and within the interiors of Ambergris and surrounding cayes, mangrove swamps, shallow lagoons, and tidal and sea‐marginal flats. Meteoric diagenesis of Pliocene and Pleistocene rocks is indicated by variable degrees of mineralogic stabilization, generally depleted whole‐rock δ18O and δ13C values, and meniscus and whisker‐crystal cements. Differences in the mineralogy and geochemistry of the Pliocene and Pleistocene rocks are attributed to variable extent of meteoric alteration. Dolomitization in the Pliocene carbonates may have begun syndepositionally and continued into the marine shallow‐burial environment. Positive dolomite δ18O and δ13C values suggest precipitation from circulating, near‐normal marine fluids that probably were modified somewhat by methanogenesis. Sedimentologic and diagenetic attributes of the Pliocene–Pleistocene rocks in the study area are similar to those in the Bahamas with which they share a common history of sea‐level fluctuations and climate change.  相似文献   

8.
The oxygen isotope compositions of diagenetic carbonate minerals from the Lower Jurassic Inmar Formation, southern Israel, have been used to identify porewater types during diagenesis. Changes in porewater composition can be related to major geological events within southern Israel. In particular, saline brines played an important role in late (Pliocene-Pleistocene) dolomitization of these rocks. Diagenetic carbonates included early siderite (δ18OSMOW=+24.4 to +26.5‰δ13CPDB=?1.1 to +0.8‰), late dolomite, ferroan dolomite and ankerite (δ18OSMOW=+18.4 to +25.8‰; δ13CPDB=?2.1 to +0.2‰), and calcite (δ18OSMOW=+21.3 to +32.6‰; δ13CPDB=?4.2 to + 3.2‰). The petrographic and isotopic results suggest that siderite formed early in the diagenetic history at shallow depths. The dolomitic phases formed at greater depths late in diagenesis. Crystallization of secondary calcite spans early to late diagenesis, consistent with its large range in isotopic values. A strong negative correlation exists between burial depth (temperature) and the oxygen isotopic compositions of the dolomitic cements. In addition, the δ18O values of the dolomitic phases in the northern Negev and Judea Mountains are in isotopic equilibrium with present formation waters. This behaviour suggests that formation of secondary dolomite post-dates the tectonic activity responsible for the present relief of southern Israel (Upper Miocene to Pliocene) and that the dolomite crystallized from present formation waters. Such is not the case in the Central Negev. In that locality, present formation waters have much lower salinities and δ18O values, indicating invasion of freshwater, and are out of isotopic equilibrium with secondary dolomite. Recharge of the Inmar Formation by meteoric water in the Central Negev occurred in the Pleistocene, and halted formation of dolomite.  相似文献   

9.
At burial depths of 800-1000 m, within the epicontinental Queensland Trough of north-east Australia (ODP Site 823), microcrystalline inter- and intraskeletal mosaics of anhedral (loaf-shaped, rounded) calcite have Sr2+ values ranging from below microprobe detection limits (<150 ppm) to 8100 ppm. Host rocks are well lithified, fine-grained mixed sediment to clayey wackestone and packstone of Middle and Late Miocene age. Petrography demonstrates that calcite precipitation has spanned shallow to deep burial, overlapping formation of framboidal pyrite in the upper 50 m; shallow-burial dolomitization (<300 m); and dedolomitization during sediment consolidation and incipient chemical compaction at greater (>400–500 m) depths. Petrographic observations illustrate that the calcite microfabric formed through coalescing crystal growth resulting from one or a combination of displacive growth in clay, porphyroid neomorphism of aragonite/vaterite, and clay replacement by calcite. Sr2+ mean concentrations in calcite between depths of 800 and 1000 m are similar to an expected equilibrium pore-water concentration, using a Dsr of 0.06, and may indicate active calcite precipitation. However, Sr2+ variation (2000–5000 ppm) within and among crystals, and concentrations that range well above predicted equilibrium values for a given depth, illustrate either variable Sr2+ retention during recrystallization of shelf-derived aragonite (and authigenic local vaterite) or relative uptake of Sr2+ during calcite precipitation with burial. Within the context of calcite formation during burial to 1 km, diagenetic attributes that affect the latter process include increased concentrations of pore-water Sr2+ with depth associated with aragonite recrystallization/dissolution; upward migration of Sr-rich pore water; and increased DSr related to local variation in precipitation/recrystallization rates, differential crystal sector growth rates and/or microvariation in aragonite distribution.  相似文献   

10.
Large volumes of carbonate breccia occur in the late syn-rift and early post-rift deposits of the Billefjorden Trough, Central Spitsbergen. Breccias are developed throughout the Moscovian Minkinfjellet Formation and in basal parts of the Kazimovian Wordiekammen Formation. Breccias can be divided into two categories: (i) thick, cross-cutting breccia-bodies up to 200 m thick that are associated with breccia pipes and large V-structures, and (ii) horizontal stratabound breccia beds interbedded with undeformed carbonate and siliciclastic rocks. The thick breccias occur in the central part of the basin, whereas the stratabound breccia beds have a much wider areal extent towards the basin margins. The breccias were formed by gravitational collapse into cavities formed by dissolution of gypsum and anhydrite beds in the Minkinfjellet Formation. Several dissolution fronts have been discovered, demonstrating the genetic relationship between dissolution of gypsum and brecciation. Textures and structures typical of collapse breccias such as inverse grading, a sharp flat base, breccia pipes (collapse dolines) and V-structures (cave roof collapse) are also observed. The breccias are cemented by calcite cements of pre-compaction, shallow burial origin. Primary fluid inclusions in the calcite are dominantly single phase containing fresh water (final melting points are ca 0 °C), suggesting that breccia diagenesis occurred in meteoric waters. Cathodoluminescence (CL) zoning of the cements shows a consistent pattern of three cement stages, but the abundance of each stage varies stratigraphically and laterally. δ18O values of breccia cements are more negative relative to marine limestones and meteoric cements developed in unbrecciated Minkinfjellet limestones. There is a clear relationship between δ18O values and the abundance of the different cement generations detected by CL. Paragenetically, later cements have lower δ18O values recording increased temperatures during their precipitation. Carbon isotope values of the cements are primarily rock-buffered although a weak trend towards more negative values with increasing burial depth is observed. The timing of gypsum dissolution and brecciation was most likely related to major intervals of exposure of the carbonate platform during Gzhelian and/or Asselian/Sakmarian times. These intervals of exposure occurred shortly after deposition of the brecciated units and before deep burial of the sediments.  相似文献   

11.
A peculiar facies of the Norian–Rhaetian Dachstein‐type platform carbonates, which contains large amounts of blackened bioclasts and dissolutional cavities filled by cements and internal sediments, occurs in the Zlatibor Mountains, Serbia. Microfacies investigations revealed that the blackened bioclasts are predominantly Solenoporaceae, with a finely crystalline, originally aragonite skeleton of fine cellular structure. Blackening of other bioclasts also occurs subordinately. Solenoporacean‐dominated reefs, developed behind the platform margin patch‐reef tract, were the main source of sand‐sized detritus. The blackened and other non‐blackened bioclasts are incorporated in automicrite cement. Radiaxial fibrous calcite cements in the dissolutional cavities are also black, dark grey or white. Reworked black pebbles were reported from many occurrences of peritidal deposits; in those cases, the blackening took place under pedogenic, meteoric diagenetic conditions. In contrast, in the inner platform deposits of the Ilid?a Limestone, the blackening of bioclasts occurred in a marine–meteoric mixing‐zone, as indicated by petrographic features and geochemical data of the skeleton‐replacing calcite crystals. Attributes of mixing‐zone pore waters were controlled by mixing corrosion, different solubility of carbonate minerals and microbial decomposition of organic matter. In the moderate‐energy inner platform environment, large amounts of microbial organic tissue were accumulated and subsequently decomposed, triggering selective blackening in the course of early, shallow burial diagenesis. The δ18O and δ13C values of the mixing‐zone precipitates and replacive calcite do not produce a linear mixing trend. Variation mainly resulted from microbial decomposition of organic matter that occurred under mixing‐zone conditions. The paragenetic sequence implies cyclic diagenetic conditions that were determined by marine, meteoric and mixing‐zone pore fluids. The diagenetic cycles were controlled by sea‐level fluctuations of moderate amplitude under a semi‐arid to semi‐humid climate.  相似文献   

12.
Previous studies on early submarine diagenesis of periplatform carbonates have implied that these originally polymineralic (aragonite, magnesian calcite, calcite) sediments are susceptible to early diagenesis only in current-swept open seaways or where surficially exposed by erosion on the seafloor. It has also been proposed that while in the shallow subsurface, periplatform oozes retain their original mineralogy for at least 200,000–400,000 yr and remain unlithified for tens of millions of years. Evidence is reported here for extensive calcitization and selective lithification of periplatform oozes of late Pleistocene age in two piston cores collected from water depths of ～ 1,000 m north of Little Bahama Bank. It is shown that shallow (<30 m) subsurface diagenesis can significantly alter the original mineralogy of periplatform oozes to predominantly calcite in less than 440,000 yr, and that cementation by calcite can produce chalk-ooze sequences within the same time-frame. Periplatform oozes that originally contain a high percentage of bank-derived magnesian calcite appear to have a higher diagenetic potential than those originally low in magnesian calcite. Shallow subsurface calcitization and fithification greatly reduce the diagenetic potential of periplatform carbonates, and chalk-ooze sequences apparently can persist for tens of millions of years and to burial depths of at least 300 m. Shallow subsurface diagenesis, at water depths > 1,000 m, proceeds via dissolution of magnesian calcite and aragonite and reprecipitation of calcite as allochem fillings, exterior overgrowths and cement. It is speculated that density-driven ‘Kohout convection‘, where seawaters under-saturated with respect to magnesian calcite and aragonite and saturated/supersaturated with respect to calcite flow through the margins of carbonate platforms, is the primary driving mechanism for shallow subsurface diagenesis. Removal of Mg during early stages of deep seafloor and shallow subsurface diagenesis should increase the Mg content of interstitial waters which is likely to increase the ‘dolomitizing potential’ of Kohout convection fluid flow.  相似文献   

13.
The Mid-Cenomanian Event was a positive carbon-isotope (δ13C) excursion recorded in hemipelagic basins of the western Tethyan Sea, North to Tropical Atlantic Ocean, and Japan. It is thought of as a prelude to the Oceanic Anoxic Event 2. However, the Mid-Cenomanian Event has never been studied in detail in shallow marine platform deposits and it is not known how it relates to carbonate production and stratigraphic geometry. To better understand how this carbon cycle disruption influenced the neritic biological communities in shallow carbonates during the Cenomanian, a facies, geochemical, diagenetic, and sequence stratigraphic study of the northern Aquitaine platform has been conducted. Seventy-six δ13C and δ18O measurements have been made on micrite, rudists, and diagenetic cements. Fifteen sedimentary facies have been arranged into four depositional environments. Three third-order sequences (CB, CC, CD) are defined from late early Cenomanian to early late Cenomanian and are well correlated with eustatic cycles in European basins. Two peaks of the Mid-Cenomanian Event (MCE1a, +1.2‰, and MCE1b, +1.7‰) have been identified for the first time in shallow marine carbonates. Analysis of diagenetic blocky calcite cements suggests that diagenesis did not affect the δ13C of micrite, which can be discussed in terms of the initial signal. The Mid-Cenomanian Event was synchronous with a turnover in neritic carbonate producers marking a transition from photozoan to heterozoan facies. This facies change resulted from the establishment of mesotrophic to eutrophic conditions at the early/mid-Cenomanian transition, reflecting a clear connection between the Mid-Cenomanian Event and neritic biological communities. Depositional geometry and carbonate production varied with δ13C during the Mid-Cenomanian Event on the Aquitaine platform. When δ13C values were between 2.5‰ and 3‰, the geometry was a flat platform with a high carbonate sedimentation rate leading to the formation of sandbars and rudist bioherms (Accommodation/Sedimentation ratio less than 1, A/S < 1). When the δ13C value exceeded 3‰, a carbonate demise occurred and clays and marls were deposited in the lower offshore environment (A/S >> 1). The general carbonate demise affecting the northern Aquitaine platform during the mid-Cenomanian can be explained by both a eustatic sea-level rise and the establishment of eutrophic conditions. The coincidence of the Mid-Cenomanian Event with both (1) the occurrence of mesotrophic to eutrophic conditions marked by carbonate producer turnover from photozoan to heterozoan facies and (2) the transgressive cycles, suggests that eustatic sea-level rise leading to high trophic conditions could explain this positive δ13C excursion in the Atlantic and western Tethyan domain. During the mid-Cenomanian, carbon cycle perturbations largely controlled the neritic biological communities on shallow carbonate platforms in a part of the western Tethyan domain.  相似文献   

14.
The sandstones of the Dhosa Sandstone Member of Late Callovian and Early Oxfordian age exposed at Ler have been analyzed for their petrofacies, provenance, tectonic setting and diagenetic history. These sandstones are fine to medium grained and poorly- to well sorted. The constituent mineral grains are subangular to subrounded. These sandstones were derived from a mixed provenance including granites, granite–gneisses, low- and high-grade metamorphic and some basic rocks of the Aravalli Range and Nagarparkar Massif. The petrofacies analysis reveals that these sandstones belong to the continental block-, recycled orogen- and rifted continental margin tectonic regime.The imprints of early and deep burial diagenesis of these sandstones include different stages of compaction, cementation, change in crystal boundaries, cement–cement boundaries, chertification and neomorphism. The sequence of cementation includes precipitation of calcite and its subsequent replacement by Fe calcite and silica cements. The typical intermediate burial (2–3 km depth) diagenetic signatures of these sandstones are reflected in the formation of suture and straight-line boundaries, and triple junctions with straight-line boundaries. The depositional environment, relatively low-energy environment that was below storm wave base but subjected to gentle currents, of the Dhosa Sandstone Member controlled the early diagenesis, which in turn influenced the burial diagenesis of these sandstones.  相似文献   

15.
通过岩心及薄片的观察,结合扫描电镜阴极发光等资料分析,对哈拉哈塘地区东河砂岩成岩作用进行了研究。结果表明：东河砂岩以岩屑石英砂岩为主,成岩作用类型有压实作用、胶结作用、溶解作用及交代作用。综合成岩作用的组合类型及其演化序列,认为本区东河砂岩主体处于中成岩阶段A期。分别讨论了沉积相、埋藏作用和层序地层等对成岩作用的控制,研究区东河砂岩在低温背景下,长期浅埋且晚期短暂快速深埋,总体上压实程度中等;主要发育滨岸和浪控三角洲沉积体系,在高精度层序界面附近,相对海平面上升,可容纳空间增大,沉积物沉积速率相对较低,且停留时间长,在同生成岩和早成岩阶段容易形成广泛分布的碳酸盐胶结。  相似文献   

16.
The Darlington (Sakmarian) and Berriedale (Artinskian) Limestones are neritic deposits that accumulated in high‐latitude environments along the south‐eastern margin of Pangea in what is now Tasmania. These rocks underwent a series of diagenetic processes that began in the marine palaeoenvironment, continued during rapid burial and were profoundly modified by alteration associated with the intrusion of Mesozoic igneous rocks. Marine diagenesis was important but contradictory; although dissolution took place, there was also coeval precipitation of fibrous calcite cement, phosphate and glauconite, as well as calcitization of aragonite shells. These processes are interpreted as having been promoted by mixing of shelf and upwelling deep ocean waters and enabled by microbial degradation of organic matter. In contrast to warm‐water carbonates where meteoric diagenesis is important, the Darlington and Berriedale Limestones were largely unaffected by meteoric diagenesis. Only minor dissolution and local cementation took place in this diagenetic environment, although mechanical compaction was ubiquitous. Correlation with burial history curves indicates that chemical compaction became important as burial depths exceeded 150 m, promoting precipitation of extensive ferroan calcite. This effect resulted from burial by rapidly deposited, overlying, thick, late Permian and Triassic terrestrial sediments. This diagenetic pathway was, however, complicated by the subsequent intrusion of massive Mesozoic diabases and associated silicifying diagenetic fluids. Finally, fractures most probably connected with Cretaceous uplift were filled with late‐stage non‐ferroan calcite cement. This study suggests that both carbonate dissolution and precipitation occur in high‐latitude marine palaeoenvironments and, therefore, the cold‐water diagenetic realm is not always destructive in terms of diagenesis. Furthermore, it appears that for the early Permian of southern Pangea at least, there was no real difference in the diagenetic pathways taken by cool‐water and cold‐water carbonates.  相似文献   

17.
In order to understand the post-depositional history of carbonate rocks of Guri Member (Lower to Middle Miocene), three stratigraphic sections were selected in north Bandar-Abbas in southeast of Iran. Sampling was carried out, analyzed for selective parameters such as oxygen and carbon isotopic compositions (δ18O and δ13C) and interpreted in the present study. We recognized several diagenetic processes including micritization, cementation, neomorphism, compaction, dissolution, silicification, dolomitization, fracturing and vein filling. Some of the diagenetic processes occurred at different conditions, so in order to achieve precise interpretation, samples from different carbonate components such as, micrite, fracture cement, solution pore cement, intergranular cement, and some biotic allochems were analyzed. In this study micrite samples were subdivided into two groups including micro-spary and micrite. They were recognized under Cathodoluminescence microscope. In addition, micrite samples were classified into five groups based on their depositional environments: supratidal, lagoon, coral bar, open sea, and open basin. There were minor changes in stable isotope ratios based on the sedimentary environments, stratigraphy successions, and micro-spary or micrite properties. In this study, similar calcite cements in petrography studies were differentiated by stable isotope data. Those calcite cements have formed in different diagenetic environments such as meteoric and burial cements. Paragenetic sequence of carbonate rocks were interpreted by integration of petrographic and isotopic studies. We have reconstructed diagenetic models of Guri Member into four stages including marine, meteoric, burial, and uplifting.  相似文献   

18.
The uplifted Pleistocene terraces along the coast of southern Sinai exhibit a well developed reef system formed during isotope stage 9, and a younger one formed during isotope stage 5. An intermediate reef corresponding to isotope stage 7 occurs only as an erosional relic in the study area. The sediments comprise reefal framestones, peri-reefal facies, coral rubble, and siliciclastic-dominated beach and aeolian facies. The compositional and textural complexity of the sediments leads to a highly variable spatial distribution of diagenetic features. However, the geometric relationships and elemental analyses allow a reconstruction of the general diagenetic evolution: during the major eustatic sea-level highstand of isotope stage 9, the Older Reef was constructed and cemented with aragonite and high-Mg calcite. Climate was probably semiarid with some rainy periods which permitted the installation of ephemeral freshwater lenses, especially during the minor sea-level lowstand within isotope stage 9. In these lenses, and during the subsequent major sea-level lowstand, some freshwater dissolution occurred. The highstand during isotope stage 7 led to the construction of the Intermediate Reef. In the Older Reef, some high-Mg calcite precipitated at that time. Dolomite cement formed either in marine interstitial waters modified by some freshwater input, or in a hypersaline context. Phreatic-meteoric low-Mg calcite cement covers, and partly replaces, previous marine cements and dolomite, but is still attributed to the major highstand of isotope stage 7 when freshwater lenses could develop during minor sea-level lowstands. The subsequent major sea-level lowstand was dominated by an arid climate, and only a little freshwater corrosion occurred. The Younger Reef formed during the major highstand of isotope stage 5. Aragonite and high-Mg calcite cements, as well as some dolomite, are common within the reef, whereas freshwater cements are limited to beach and aeolian facies. Due to tectonic uplift, only the lower part of the Older Reef was reflooded during isotope stage 5, and only some aragonite crystals precipitated on top of dolomite or low-Mg calcite. The interrelationships between tectonics, sea-level variations of different orders, and climatic changes thus had a profound impact on the diagenetic history of these reef systems.  相似文献   

19.
Detailed petrographic analyses along a depositional transect from a carbonate platform to shale basin reveals that dolomite is the principal burial diagenctic mineral in the Maryville Limestone. This study examines the role of burial dolomitization of subtidal carbonates. Dolomite occurs as a replacement of precursor carbonate and as inter- and intraparticle cements. Four different types of dolomite are identified based on detailed petrographic and gcochemical analyses. Type I dolomite occurs as small, irregular disseminations typically within mud-rich facies.Type II dolomite typically occurs as inclusions of planar euhedral rhombs (ferroan), 5–300 μm in size, in blocky clear ferroan calcite (meteoric) spar. Type II dolomite is non-luminescent. Type I and II dolomite formed during shallow to intermediate burial diagenesis. Type III dolomite consists of subhedral to anhedral crystals 10–150 μm in size occurring as thin seams along stylolites and as thick bands a few millimetres in width. This dolomite consists of dominantly non-luminescent rhombs and, less commonly, orange luminescent and zoned rhombs. Type IV dolomite consists of baroque or saddle-shaped, 100–1500 μm crystals, and is non-luminescent. Type IV dolomite formed during the period of maximum burial. Types III and IV dolomite increase in abundance downslope. Type III dolomite contains 1.2–2.6 wt% Fe and a maximum of 1000 ppm Mn. The distribution of these elements displays no distinct vertical or lateral trends. In contrast, Fe and Mn distributions in Type IV dolomite exhibit distinct spatial trends, decreasing from 3.5–4.5 wl% Fe and 0.1–0.3 wt% Mn in the west (slope/basin) to 1.5–2.5 wt% Fe and less than 600 ppm Mn in the east (shelf margin), a distance of approximately 60 km. Spatial trends in Fe and Mn distributions in Type IV saddle dolomite, suggest a west-east fluid flow during late burial diagenesis. Types III and IV dolomite have a mean δ18O value of - 7.8%00 and a mean δ13C value of + 1.1%00 (relative to the PDB standard). Based on a range of assumed basinal water composition of 2.8%00 SMOW, temperatures calculated from δ18O values of Types III and IV dolomite range between 75 and 160°C. 87Sr/86Sr data for Types III and IV dolomite range from 0.7111 to 0.7139. These values are radiogenic when compared to Cambrian marine values and are consistent with the presence of a diagenetic fluid that interacted with siliciclastic sediments. The distribution of Palaeozoic facies in the southern Appalachians indicates a Cambrian shale source for the fluids, whilst burial curves suggest a Middle Ordovician age for burial fluid movement.  相似文献   

20.
The Middle Jurassic Khatatba Formation acts as a hydrocarbon reservoir in the subsurface in the Western Desert, Egypt. This study, which is based on core samples from two exploration boreholes, describes the lithological and diagenetic characteristics of the Khatatba Formation sandstones. The sandstones are fine‐ to coarse‐grained, moderately to well‐sorted quartz arenites, deposited in fluvial channels and in a shallow‐marine setting. Diagenetic components include mechanical and chemical compaction, cementation (calcite, clay minerals, quartz overgrowths, and a minor amount of pyrite), and dissolution of calcite cements and feldspar grains. The widespread occurrence of an early calcite cement suggests that the Khatatba sandstones lost a significant amount of primary porosity at an early stage of its diagenetic history. In addition to calcite, several different cements including kaolinite and syntaxial quartz overgrowth occur as pore‐filling and pore‐lining cements. Kaolinite (largely vermicular) fills pore spaces and causes reduction in the permeability of the reservoir. Based on framework grain–cement relationships, precipitation of the early calcite cement was either accompanied by or followed the development of part of the pore‐lining and pore‐filling cements. Secondary porosity development occurred due to partial to complete dissolution of early calcite cements and feldspar. Late kaolinite clay cement occurs due to dissolved feldspar and has an impact on the reservoir quality of the Khatatba sandstones. Open hydraulic fractures also generated significant secondary porosity in sandstone reservoirs, where both fractures and dissolution took place in multiple phases during late diagenetic stages. The diagenesis and sedimentary facies help control the reservoir quality of the Khatatba sandstones. Fluvial channel sandstones have the highest porosities and permeabilities, in part because of calcite cementation, which inhibited authigenic clays or was later dissolved, creating intergranular secondary porosity. Fluvial crevasse‐splay and marine sandstones have the lowest reservoir quality because of an abundance of depositional kaolinite matrix and pervasive, shallow‐burial calcite and quartz overgrowth cements, respectively. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号