共查询到20条相似文献，搜索用时 390 毫秒
1.
基于亚像素角点检测的数字图像测量系统能够记录三轴试样表面方块角点的位移,从而获得试样表面每一时刻的局部应变及应变场。分析了试样不同位置的局部径向应变在剪切过程中的变化,获得了以不同初始成样含水率制备的松砂和密砂试样在不同特征时刻的应力与应变的特征值。通过轴向应变场的变化分析了从应变局部化出现到剪切带发育、形成的这一完整的渐进破坏过程,总结了剪切带形成时的局部最大轴向应变特征值,并定性地分析了剪切带内、外土体在渐进破坏过程中不同的轴向应变增长率。试验结果表明：在应变场中试样应变局部化明显,并可以依此确定应变局部化的出现、剪切带的形成;对于密砂及初始含水率为0%制备的松砂试样,应力在应变局部化出现之初即达到峰值,剪切带形成时应力已经开始下降,进入应变软化阶段;以初始含水率为6%和12%制备的松砂试样在达到应力峰值时剪切带已经形成;剪切带内土体的局部轴向应变增长幅度比剪切带外的土体大得多。试样整体轴向应变的增大主要是由剪切带内土体剪切破坏产生的较大轴向应变所致。 相似文献
2.
Geotechnical experiments show that Lode angle‐dependent constitutive formulations are appropriate to describe the failure of geomaterials. In the present study, we have adopted one such class of failure criteria along with a versatile constitutive relationship to theoretically analyze the effects of Lode angle on localized shear deformation or shear band formation in loose sand for both drained and undrained conditions. We determine the variation in the possible stress states for shear localization due to the introduction of Lode angle by considering the localized deformation as a bifurcation problem. Further, similar bifurcation analysis is performed for the stress states along a specific loading path, namely, plane strain compression at the constitutive level. In addition, the plane strain compression tests have been simulated as a boundary value finite element problem to see how Lode angle affects the post‐localization response. Results show that the inclusion of a Lode angle parameter within the failure criterion has considerable effects on the onset, plastic strain, and propagation of shear localization in loose sand specimens. For drained condition, we notice early inception of shear localization and multiple band formation when the Lode angle‐dependent failure criterion is used. Undrained localization characteristics, however, found to be independent of Lode angle consideration. 相似文献
3.
An analysis of the vane test using an Arbitrary Lagrangian–Eulerian formulation within a finite element framework is presented. This is suitable for soft clays for which the test is commonly used to measure in situ undrained shear strength. Constitutive laws are expressed in terms of shear stress–shear strain rates, and that permits the study of time effects in a natural manner. An analysis of the shear stress distributions on the failure surface according to the material model is presented. The effect of the constitutive law on the shear band amplitude and on the position of the failure surface is shown. In general, the failure surface is found at 1–1·01 times the vane radius, which is consistent with some experimental results. The problem depends on two dimensionless parameters that represent inertial and viscous forces. For usual vane tests, viscous forces are predominant, and the measured shear strength depends mainly on the angular velocity applied. That can explain some of the comparisons reported when using different vane sizes. Finally, the range of the shear strain rate applied to the soil is shown to be fundamental when comparing experimental results from vane, triaxial and viscosimeter tests. Appart from that, an experimental relation between undrained shear strength and vane angular velocity has been reproduced by this simulation. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
4.
A computational framework is presented for dynamic strain localization and deformation analyses of water‐saturated clay by using a cyclic elasto‐viscoplastic constitutive model. In the model, the nonlinear kinematic hardening rule and softening due to the structural degradation of soil particles are considered. In order to appropriately simulate the large deformation phenomenon in strain localization analysis, the dynamic finite element formulation for a two‐phase mixture is derived in the updated Lagrangian framework. The shear band development is shown through the distributions of viscoplastic shear strain, the axial strain, the mean effective stress, and the pore water pressure in a normally consolidated clay specimen. From the local stress–strain relations, more brittleness is found inside the shear bands than outside of them. The effects of partially drained conditions and mesh‐size dependency on the shear banding are also investigated. The effect of a partially drained boundary is found to be insignificant on the dynamic shear band propagation because of the rapid rate of applied loading and low permeability of the clay. Using the finer mesh results in slightly narrower shear bands; nonetheless, the results manifest convergency through the mesh refinement in terms of the overall shape of shear banding and stress–strain relations. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
5.
利用FLAC内嵌语言编制的计算平面应变压缩岩样轴向、侧向、体积应变及泊松比的FISH函数,计算了弹性模量不同时单缺陷岩样的全部变形特征,研究了弹性模量对岩样的破坏过程及前兆的影响。在峰前及峰后,岩石的本构模型分别取为线弹性模型及莫尔-库仑剪破坏与拉破坏复合的应变软化模型。当弹性模量不是较高时,岩样自始至终仅出现一条倾斜的剪切带。当弹模较高时,最终剪切应变仅强烈集中于贯通岩样的剪切带内部。剪切带倾角在Arthur与Coulomb倾角之间,且随弹模的增加而降低,经典理论对此不能解释。随着弹模的增加,峰值应力增加,峰前的应力-轴向应变曲线变得陡峭,峰后的应力-轴向应变曲线的斜率几乎不变。随着弹模的增加,峰值强度所对应的轴向应变及侧向应变的大小均降低;应力-侧向应变曲线软化段变得陡峭。随着弹模的降低,侧向应变-轴向应变曲线、泊松比-轴向应变曲线及体积应变-轴向应变曲线在峰前发生转折（偏离线性状态）的程度越来越大;非弹性轴向应变增加;材料缺陷附近的最大剪切应变增量增加。岩样破坏的前兆随着弹性模量的降低而逐渐增强。 相似文献
6.
Numerical studies of shear banding in interface shear tests using a new strain calculation method 总被引：1，自引：0，他引：1
Strain localization is closely associated with the stress–strain behaviour of an interphase system subject to quasi‐static direct interface shear, especially after peak stress state is reached. This behaviour is important because it is closely related to deformations experienced by geotechnical composite structures. This paper presents a study using two‐dimensional discrete element method (DEM) simulations on the strain localization of an idealized interphase system composed of densely packed spherical particles in contact with rough manufactured surfaces. The manufactured surface is made up of regular or irregular triangular asperities with varying slopes. A new simple method of strain calculation is used in this study to generate strain field inside a simulated direct interface shear box. This method accounts for particle rotation and captures strain localization features at high resolution. Results show that strain localization begins with the onset of non‐linear stress–strain behaviour. A distinct but discontinuous shear band emerges above the rough surface just before the peak stress state, which becomes more expansive and coherent with post‐peak strain softening. It is found that the shear bands developed by surfaces with smaller roughness are much thinner than those developed by surfaces with greater roughness. The maximum thickness of the intense shear zone is observed to be about 8–10 median particle diameters. The shear band orientations, which are mainly dominated by the rough boundary surface, are parallel with the zero extension direction, which are horizontally oriented. Published in 2007 by John Wiley & Sons, Ltd. 相似文献
7.
不同应力路径下剪切带的数值模拟 总被引：4，自引：1，他引：3
采用回映应力更新算法,编写了基于伏斯列夫面的超固结黏土本构关系模型子程序,嵌入非线性有限元软件ABAQUS。通过对单元试验进行三轴压缩、三轴伸长及平面应变等问题的模型预测,再现了超固结黏土在不同初始超固结比和应力路径时的变形和强度特性,从而验证了子程序的正确性。借助该本构模型,对三轴压缩、三轴伸长及平面应变应力路径下超固结黏土体变形局部化问题,进行了三维数值模拟。分析结果表明：超固结黏土在三轴压缩及伸长状态时,土体变形局部化在应力-应变关系软化时出现,而平面应变状态时,在应力-应变关系硬化阶段出现,其超固结黏土的剪胀特性在剪切带的形成过程中起重要作用。 相似文献
8.
The inelastic response of Tennessee marble is modelled by an elastic plastic constitutive relation that includes pressure dependence of yield, strain‐softening and inelastic volume strain (dilatancy). Data from 12 axisymmetric compression tests at confining pressures from 0 to 100 MPa are used to determine the dependence of the yield function and plastic potential, which are different, on the first and second stress invariants and the accumulated inelastic shear strain. Because the data requires that the strain at peak stress depends on the mean stress, the locus of peak stresses is neither a yield surface nor a failure envelope, as is often assumed. Based on the constitutive model and Rudnicki and Rice criterion, localization is not predicted to occur in axisymmetric compression although faulting is observed in the tests. The discrepancy is likely due to the overly stiff response of a smooth yield surface model to abrupt changes in the pattern of straining. The constitutive model determined from the axisymmetric compression data describes well the variation of the in‐plane stress observed in a plane strain experiment. The out‐of‐plane stress is not modelled well, apparently because the inelastic normal strain in this direction is overpredicted. In plane strain, localization is predicted to occur close to peak stress, in good agreement with the experiment. Observation of localization on the rising portion of the stress–strain curve in plane strain does not, however, indicate prepeak localization. Because of the rapid increase of mean stress in plane strain, the stress–strain curve can be rising while the shear stress versus shear strain curve at constant mean stress is falling (negative hardening modulus). Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
9.
基于广义位势理论建立的岩土体材料本构模型以及岩土体材料与结构接触面本构模型原理相通,只是前者是在三轴剪切试验条件下的三维应力空间建模,后者是在单剪试验条件下的二维应力空间建模。单剪试验条件下土与结构的接触面问题可以看作是法向与切向应力空间上的二维问题,其试验结果可以表达成由应力、应变组成的二维矢量。结合接触面力学特性,确定应力空间中的势函数以及塑性状态方程,可以推导出双重势面接触面弹塑性本构方程的一般表达式。进一步取两个势函数分别为法向应力和切向应力,建立简化双重势面接触面弹塑性模型的本构方程,该方程可直接应用于有限元等数值分析。结合试验实例对建模方法的合理性进行验证,模型拟合效果良好。研究结果表明,基于广义塑性位势理论建立接触面本构模型无需推求塑性势函数和屈服函数,可以直接得到弹塑性刚度矩阵,且建模方便。 相似文献
10.
The flow stress in the yield surface of plastic constitutive equation is modified with a higher order gradient term of the effective plastic strain to model the effect of inhomogeneous deformation in granular materials. The gradient constitutive model has been incorporated into the finite element code ABAQUS and used to simulate biaxial shear tests on dry sand. It is shown that the shape of the post-peak segment of the load displacement curve predicted by the numerical analysis is dependent on the mesh size when gradient term is not used. Use of an appropriate gradient coefficient is shown to correct this and predict a unique shape of the load displacement curve regardless of the mesh size. The gradient coefficient required turns out to be approximately inversely proportional to the mesh elemental area. Use of the strain gradient term is found to diffuse the concentration of plastic strains within shear band resulting in its consistent width. The coefficient of the higher gradient term appears as a function of the grain size, the mean confining stress, and the plastic softening modulus. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
11.
The dynamic response analysis combined with the generalized return-mapping algorithm is applied to the integration algorithms
of viscoplastic constitutive relations including the effect of the shear band. The kinematic hardening model based on modified
and extended soil model with isotropic strain-hardening–softening is employed. In this paper, the TESRA (temporary effect
of strain rate and acceleration) model is employed for the nonlinear viscosity of sand. The constitutive equations of rate-dependent
plasticity originally proposed by Duvaut–Lions are employed as the base of the solutions. Liquefaction of a buried pipe is
analyzed by finite element method by employing the above mentioned constitutive relations and the calculated results are compared
with experimental results. The dynamic response analysis is applied to the solutions of the problems. The kinematic hardening–softening
viscoplastic constitutive relations for geomaterials are promising for the predictions of cumulative deformations and liquefaction
of the buried pipe. A great deal of experimental results indicate that the stress is a unique function of irreversible strain
and its rate. 相似文献
12.
The extent to which the evolution of instabilities and failure across multiple length scales can be reproduced with the aid of a bifurcation analysis is examined. We adopt an elastoplastic micropolar constitutive model, recently developed for dense cohesionless granular materials within the framework of thermomicromechanics. The internal variables and their evolution laws are conceived from a direct consideration of the dissipative mechanism of force chain buckling. The resulting constitutive law is cast entirely in terms of the particle scale properties. It thus presents a unique opportunity to test the potential of micromechanical continuum formulations to reproduce key stages in the deformation history: the development of material instabilities and failure following an initially homogeneous deformation. Progression of failure, initiating from frictional sliding and rolling at contacts, followed by the buckling of force chains, through to macroscopic strain softening and shear banding, is reproduced. Bifurcation point, marking the onset of shear banding, occurred shortly after the peak stress ratio. A wide range of material parameters was examined to show the effect of particle scale properties on the progression of failure. Model predictions on the thickness and angle of inclination of the shear band and the structural evolution inside the band, namely the latitudinal distribution of particle rotations and the angular distributions of contacts and the normal contact forces, are consistent with observations from numerical simulations and experiments. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
13.
Heterogeneity arises in soil subjected to interface shearing, with the strain gradually localizing into a band area. How the strain localization accumulates and develops to form the structure is crucial in explaining some significant constitutive behaviors of the soil–structural interface during shearing, for example, stress hardening, softening, and shear-dilatancy. Using DEM simulation, interface shear tests with a periodic boundary condition are performed to investigate the strain localization process in densely and loosely packed granular soils. Based on the velocity field given by grains’ translational and rotational velocities, several kinematic quantities are analyzed during the loading history to demonstrate the evolution of strain localization. Results suggest that tiny concentrations in the shear deformation have already been observed in the very early stage of the shear test. The degree of the strain localization, quantified by a proposed new indicator, α, steadily ascends during the stress-hardening regime, dramatically jumps prior to the stress peak, and stabilizes at the stress steady state. Loose specimen does not develop a steady pattern at the large strain, as the deformation pattern transforms between localized and diffused failure modes. During the stress steady state of both specimens, remarkable correlations are observed between α and the shear stress, as well as between α and the volumetric strain rate. 相似文献
14.
The paper reports on the results of theoretical and experimental investigations on the spontaneous formation of shear bands in sand bodies. The phenomenon is considered as a bifurcation problem. Consequently, material response and configuration-dependent loading determine the bifurcation mode. Both Coulomb's and Roscoe's solutions of inclination of the shear band can be correct theoretically and experimentally. The first one holds for non-rotating stress axes, the second one for co-rotating stress and strain increment axes during failure. Values in between can occur if the rotation of principal stress axes is not equal to one of these limits. If Coulomb's inclination of shear band occurs, there is a thin deforming material layer separating rigid bodies. Inside the shear band non-coaxiality of strain increment and stress holds from the beginning. If Roscoe's inclination of shear band occurs, it is separating two deforming bodies. Inside the shear band strain increment and stress are coaxial at peak. 相似文献
15.
Liquefaction is associated with the loss of mean effective stress and increase of the pore water pressure in saturated granular materials due to their contractive tendency under cyclic shear loading. The loss of mean effective stress is linked to loss of grain contacts, bringing the granular material to a “semifluidized state” and leading to development and accumulation of large cyclic shear strains. Constitutive modeling of the cyclic stress-strain response in earthquake-induced liquefaction and post-liquefaction is complex and yet very important for stress-deformation and performance-based analysis of sand deposits. A new state internal variable named strain liquefaction factor is introduced that evolves at low mean effective stresses, and its constitutive role is to reduce the plastic shear stiffness and dilatancy while maintaining the same plastic volumetric strain rate in the semifluidized state. This new constitutive ingredient is added to an existing critical state compatible, bounding surface plasticity reference model, that is well established for constitutive modeling of cyclic response of sands in the pre-liquefaction state. The roles of the key components of the proposed formulation are examined in a series of sensitivity analyses. Their combined effects in improving the performance of the reference model are examined by simulating undrained cyclic simple shear tests on Ottawa sand, with focus on reproducing the increasing shear strain amplitude as well as its saturation in the post-liquefaction response. 相似文献
16.
Implementation and applications for a constitutive numerical model on F‐75 silica sand, course silica sand and two sizes of glass beads compressed under plane strain conditions are presented in this work. The numerical model is used to predict the stress versus axial strain and volumetric strain versus axial strain relationships of those materials; moreover, comparisons between measured and predicted shear band thickness and inclination angles are discussed and the numerical results compare well with the experimental measurements. The numerical model is found to respond to the changes in confining pressure and the initial relative density of a given granular material. The mean particle size is used as an internal length scale. Increasing the confining pressure and the initial density is found to decrease the shear band thickness and increase the inclination angle. The micropolar or Cosserat theory is found to be effective in capturing strain localization in granular materials. The finite element formulations and the solution method for the boundary value problem in the updated Lagrangian frame (UP) are discussed in the companion paper. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
17.
18.
This paper studies the effects of initial fabric anisotropy of dry sand in simple shear deformation. The effects of anisotropy are taken into consideration through the modification of the mobilized friction in the Mohr–Coulomb‐type yield surface as a function of a fabric parameter. In addition, the constitutive model uses a gradient term that directly incorporates the effects of material length scale. The constitutive formulation is implemented into ABAQUS finite element code and used to simulate shearing of the dry sand under various conditions of simple shear. The numerical simulations show that while the shear stress response is affected by fabric anisotropy, its effects on strain localization in simple shear are minimal. This is in contrast to other devices such as the biaxial shear. The strain localization in simple shear is controlled more by the imposed boundary conditions. The use of material length scale is shown to remove the effects of strain localization in the shearing response. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
19.
Hossein Masoumi Kurt J. Douglas Adrian R. Russell 《Rock Mechanics and Rock Engineering》2016,49(1):47-62
A new constitutive model for intact rock is presented recognising that rock strength, stiffness and stress–strain behaviour are affected by the size of the rock being subjected to loading. The model is formulated using bounding surface plasticity theory. It is validated against a new and extensive set of unconfined compression and triaxial compression test results for Gosford sandstone. The samples tested had diameters ranging from 19 to 145 mm and length-to-diameter ratios of 2. The model captures the continuous nonlinear stress–strain behaviour from initial loading, through peak strength to large shear strains, including transition from brittle to ductile behaviour. The size dependency was accounted for through a unified size effect law applied to the unconfined compressive strength—a key model input parameter. The unconfined compressive strength increases with sample size before peaking and then decreasing with further increasing sample size. Inside the constitutive model two hardening laws act simultaneously, each driven by plastic shear strains. The elasticity is stress level dependent. Simple linear loading and bounding surfaces are adopted, defined using the Mohr–Coulomb criterion, along with a non-associated flow rule. The model simulates well the stress–strain behaviour of Gosford sandstone at confining pressures ranging from 0 to 30 MPa for the variety of sample sizes considered. 相似文献
20.
动载作用下岩石的破坏规律研究对于众多地质灾害的机制分析和预防具有重要的理论及实际意义。鉴于数值模拟研究的优势,应大力发展适于岩石动力断裂过程模拟的数值方法。在自主开发的拉格朗日元与离散元耦合连续−非连续方法的基础上,采用朱−王−唐本构模型取代了广义胡克定律,发展了考虑动力本构的连续−非连续方法,其正确性通过模拟不同加载速度时砂岩试样的单轴压缩试验进行了验证。通过统计裂缝区段数目随着岩样的纵向应变的演化规律,并监测岩样左、右对称线上多个测点的最小主应力的演化规律,开展了不同加载速度时单轴压缩花岗岩试样的变形−开裂过程研究,阐明了岩样的开裂机制。研究发现,剪裂缝以雁列式展布,整体上形成剪切带。随着时步数目的增加,各测点的最小主应力均呈波动下降−震荡上升的变化趋势。震荡上升阶段对应岩样的应变软化阶段。测点分离后最小主应力的震荡幅度较大,这是由于节点分离和单元接触激发了较大的应力波。剪切带尖端的最小主应力集中会使测点发生剪切分离。当岩样的三角块向下楔入时,下方测点的应力状态类似于紧凑拉伸试验进而发生拉伸分离。 相似文献