首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 32 毫秒
1.
During the Messinian—Pleistocene, the Peninsular Tyrrhenian margin underwent a NE—SW orientated stretching regime, with the formation of a NW—SE normal fault system and basins which are linked by NE—SW transfer fault zones. These fault zones border narrow and deep asymmetric basins. This paper uses geological and geophysical analysis (structural and stratigraphical data, seismic lines and anisotropy of magnetic susceptibility (AMS) data) to look at the evolution of one of these transfer-related basins, located south of Rome (Ardea basin). Comparison with other similar features indicates that the common characteristics of these transfer structures are: (i) the slip vector along the transfer fault is mostly dip-slip, which means that the local extensional direction is orthogonal to the regional extensional direction; (ii) development of a narrow and deep half-graben basin.  相似文献   

2.
Many works in the last decades underline the role of evaporites, not just as a conditioning factor but as the engine for subsidence and eventually basin inversion. The western Mediterranean alpine ranges are being investigated in this regard because of the presence of discontinuous units of Permian to Triassic evaporites, deposited in the western Tethys basins. This work presents a thorough analysis of two particular structures (Cañada Vellida and Miravete anticlines) in the intraplate Maestrazgo basin (eastern Iberian Chain, Spain) in which evidence to support their reinterpretation as salt-driven structures have been recently reported. Our analysis includes (i) a comprehensive stratigraphic and structural study of the folds along their entire trace, (ii) the compilation of thickness and distribution of evaporite–bearing and supraevaporite units, paying special attention to changes in the thickness of units in relation to anticlines, and (iii) the study of fault patterns, sometimes in relation to the mechanical stratigraphy. All three aspects are also documented and discussed on a regional scale. The new data and interpretations reported here reinforce the extensional origin of the Late Jurassic–Early Cretaceous basins, and the role of regional extensional tectonics as the responsible for the development of first-order syn-sedimentary normal fault zones driving the formation and evolution of sub-basins. These basins were subsequently inverted and deformed, including the formation of complex, box-geometry anticlines that, in their turn, controlled deposition in Cenozoic basins. The review of the arguments that support the alternative of salt tectonics for the origin of such anticlines has allowed us to delve into the sedimentary and tectonic evolution of the inverted extensional basins and to propose a specific model for the development of these faulted anticlines. The role of salt levels and other interlayered detachments in the structuring of sedimentary basins and their inversion is also pondered. The observations in the eastern Iberian Chain reported here have implications to assess ongoing reinterpretations in terms of salt tectonics in other alpine basins and ranges of the western Mediterranean.  相似文献   

3.
Abstract During the migration of the back arc extension from central to western Greece the Corinth and Patras grabens are being formed. Orthogonal opening of these graben zones is accomplished by WNW listric normal faults and NNE transfer faults which produce an along-axis fragmentation. The listric faults show an increase in the dip of the fault plane westwards as well as a decrease in the maximum extension rate from 50% to the east in the Corinth graben, to 10% to the west in the Patras graben. Similarly, towards the west, Plio-Quaternary deposits become thinner whereas Pliocene sediments thin-out indicating a westward rift propagation.
As the back arc extension migrates westwards it is interacting or is being superimposed above another orthogonal fault system consisting of NNW and ENE normal faults. These faults have been formed during general uplift behind the orogenic front which has been migrating from western Greece to the Ionian islands. The ENE-trending Rio graben which belongs to his orthogonal system connects the Patras graben to the Corinth graben and has subsequently been active as a transfer fault between them.
Plio-Quaternary geodynamic processes in central continental Greece are quite similar to those earlier processes observed in the central Aegean region which reflect the initial stage of continental break-up behind a migrating orogenic front.  相似文献   

4.
Summary. Deep seismic reflection profiling, as well as geologic studies, indicate that extensional basins are a common feature of continental crust. The wide-spread occurrence of extensional basins, combined with published models on the effects of extension on lower crustal rocks, suggests that extensional processes play an important role in the evolution of continental crust. Extension is now recognized to have been the last major tectonic event to affect approximately 50% of the United States. This observation and (he preservation of extensional features in areas which have experienced subsequent episodes of compression, suggests that extensional processes may lead to a strengthening of continental crust. In areas of active extension such as the western United States, seismic and petrologic data, as well as theoretical modeling of heat flow data, suggests that the lower crust may be predominantly intrusive igneous material emplaced during extension and that the present Mohorovicic discontinuity formed during extension. Although the interpretation of the various data is somewhat speculative, we suggest that the volume of continental material in some areas has doubled as a result of extension. Thus, extension may result in the addition of a significant amount of new material to the continents.  相似文献   

5.
New seismic reflection profiles from the Tugrug basin in the Gobi‐Altai region of western Mongolia demonstrate the existence of preserved Mesozoic extensional basins by imaging listric normal faults, extensional growth strata, and partially inverted grabens. A core hole from this region recovered ca. 1600 continuous meters of Upper Jurassic – Lower Cretaceous (Kimmeridgian–Berriasian) strata overlying Late Triassic volcanic basement. The cored succession is dominated by lacustrine and marginal lacustrine deposits ranging from stratified lacustrine, to subaqueous fan and delta, to subaerial alluvial‐fluvial environments. Multiple unconformities are encountered, and these represent distinct phases in basin evolution including syn‐extensional deposition and basin inversion. Prospective petroleum source and reservoir intervals occur, and both fluid inclusions and oil staining in the core provide evidence of hydrocarbon migration. Ties to correlative outcrop sections underscore that, in general, this basin appears to share a similar tectono‐stratigraphic evolution with petroliferous rift basins in eastern Mongolia and China. Nevertheless, some interesting contrasts to these other basins are noted, including distinct sandstone provenance, less overburden, and younger (Neogene) inversion structures. The Tugrug basin occupies an important but perplexing paleogeographic position between late Mesozoic contractile and extensional provinces. Its formation may record a rapid temporal shift from orogenic crustal thickening to extensional collapse in the Late Jurassic, and/or an accommodation zone with a Mesozoic strike‐slip component.  相似文献   

6.
Subduction zones provide direct insight into plate boundary deformation and by studying these areas we better understand tectonic processes and variability over time. We studied the structure of the offshore subduction zone system of the Pampean flat‐slab segment (ca. 29–33°S) of the Chilean margin using seismic and bathymetric constraints. Here, we related and analysed the structural styles of the offshore and onshore western fore‐arc. Overlying the acoustic top of the continental basement, two syn‐extensional seismic sequences were recognised and correlated with onshore geological units and the Valparaíso Forearc Basin seismic sequences: (SII) Pliocene‐Pleistocene and (SI) Miocene‐Pliocene (Late Cretaceous (?) to Miocene‐Pliocene) syn‐extensional sequences. These sequences are separated by an unconformity (i.e. Valparaíso Unconformity). Seismic reflection data reveal that the eastward dipping extensional system (EI) recognised at the upper slope can be extended to the middle slope and controlled the accumulation of the older seismic package (SI). The westward dipping extensional system (EII) is essentially restricted to the middle slope. Here, EII cuts the eastward dipping extensional system (EI), preferentially parallel to the inclination of the older sequences (SI), and controlled a series of middle slope basins which are filled by the Pliocene‐Pleistocene seismic sequence (SII). At the upper slope and in the western Coastal Cordillera, the SII sequence is controlled by eastward dipping faults (EII) which are the local reactivation of older extensional faults (EI). The tectonic boundary between the middle (eastern outermost forearc block) and upper continental slope (western coastal block) is a prominent system of trenchward dipping normal fault scarps (ca. 1 km offset) that resemble a major trenchward dipping extensional fault system. This prominent structural feature can be readily detected along the Chilean erosive margin as well as the two extensional sets (EI and EII). Evidence of slumping, thrusting, reactivated faults and mass transport deposits, were recognised in the slope domain and locally restricted to some eastern dipping faults. These features could be related to gravitational effects or slope deformation due to coseismic deformation. The regional inclination of the pre‐Pliocene sequences favoured the gravitational collapse of the outermost forearc block. We propose that the structural configuration of the study area is dominantly controlled by tectonic erosion as well as the uplift of the Coastal Cordillera, which is partially controlled by pre‐Pliocene architecture.  相似文献   

7.
The Valencia Trough is a rift formed during the late Oligocene – early Miocene opening of the western Mediterranean Sea. In this paper, we focus on the crustal structure and on the deep structure of the basin which is hard to delineate because of the widespread volcanism that conceals part of the basement. This work is the result of the study of a dense network of seismic profiling surveys and exploratory wells made in the region. The structure of the deep basement reveals the importance of transfer fracture zones which represent steps in the deepening of the basin. The thinning of the crust follows the basement deepening and we find the same partitioning of structural blocks at the crustal level. Transfer faults also represent limits in the thinning of the crust and each compartment thus delineated has a different thinning and different extensional ratios. Such a discrepancy between the thinning of the upper crust and the thinning of the lower crust may be common in many other rift zones, but is seldom as well imaged as in this study of the Valencia Trough. The transfer zones are related to extensional processes but a simple shear opening is envisaged to explain the discrepancies between thinning and extension and the asymmetry of the margins. The more efficient thinning in the lower crust can be explained by a thermal anomaly in accordance with the recent evolution of the trough. The steady thinning of the margins is discussed in terms of a marginal basin in a compressional context.  相似文献   

8.
Faulting exerts an important control upon drainage development in active extensional basins and thus helps determine the architecture of the sedimentary infill to a synrift basin. Examples of the interaction between faulting and drainage from the western United States and central Greece may be grouped into a relatively small number of classes based upon the structural position of a drainage catchment: footwall, hangingwall, fault offset and axial. Our examples illustrate the diversity of erosional effects that might arise because of variations in the spacing, orientation and segmentation of faults and their interactions. Where basement lithology is similar, footwall catchments are generally smaller, shorter and steeper than those of the hangingwall. Footwall-sourced alluvial fans and fan deltas are: generally smaller in area than those sourced from similar lithologies in the hangingwall. Wide fault offsets often give rise to large drainage catchments in the footwall. The development of axial drainage depends upon the breaching of transverse bedrock ridges by headward stream erosion or by lake overflow. Once breaching has occurred the direction of axial stream flow is controlled by the potential developed between basins of contrasting widths. Fault migration and propagation leads to the uplift, erosion and resedimentation of the sedimentary infill to formerly active basins, leading to the cutting of footwall unconformities. The outward sediment flux from structurally controlled catchments is modulated in an important way by lithology and runoff. The greatest contrasts in basement lithology arise when fault migration and propagation have occurred, such that the sedimentary fill to previously active basins is uplifted, incised and eroded by the establishment of large new drainage systems in the footwalls of younger faults. Drainage patterns in areas where faults interact can shed light on the relative timing of activity and therefore the occurrence of fault migration and propagation. Facies and palaeocurrent trends in ancient grabens may only be correctly interpreted when observations are made on a length scale of 10–20 km, comparable to that of the largest fault segments.  相似文献   

9.
Pliocene–Quaternary basins of the Ionian islands evolved in a complex tectonic setting that evolved from a mid to late Cenozoic compressional zone of the northern external Hellenides to the rapidly extending Pliocene–Quaternary basins of the Peloponnese. The northern limit of the Hellenic Trench marks the junction of these two tectonic regimes. A foreland-propagating fold and thrust system in the northern external Hellenides segmented the former Miocene continental margin basin in Zakynthos and permitted diapiric intrusion of Triassic gypsum along thrust ramps. Further inboard, coeval extensional basins developed, with increasing rates of subsidence from the Pliocene to Quaternary, resulting in four principal types of sedimentation: (1) condensed shelf-sedimentation on the flanks of rising anticlines; (2) coarse-grained sedimentation in restricted basins adjacent to evaporitic diapirs rising along thrust ramps; (3) larger basins between fold zones were filled by extrabasinal, prodeltaic mud and sand from the proto-Acheloos river; (4) margins of subsiding Quaternary basins were supplied at sea-level highstands by distal deltaic muds and at lowstands by locally derived coarse clastic sediment.  相似文献   

10.
The Alhama de Murcia and Crevillente faults in the Betic Cordillera of southeast Spain form part of a network of prominent faults, bounding several of the late Tertiary and Quaternary intermontane basins. Current tectonic interpretations of these basins vary from late‐orogenic extensional structures to a pull‐apart origin associated with strike–slip movements along these prominent faults. A strike–slip origin of the basins, however, seems at variance both with recent structural studies of the underlying Betic basement and with the overall basin and fault geometry. We studied the structure and kinematics of the Alhama de Murcia and Crevillente faults as well as the internal structure of the late Miocene basin sediments, to elucidate possible relationships between the prominent faults and the adjacent basins. The structural data lead to the inevitable conclusion that the late Miocene basins developed as genuinely extensional basins, presumably associated with the thinning and exhumation of the underlying basement at that time. During the late Miocene, neither the Crevillente fault nor the Alhama de Murcia fault acted as strike–slip faults controlling basin development. Instead, parts of the Alhama de Murcia fault initiated as extensional normal faults, and reactivated as contraction faults during the latest Miocene–early Pliocene in response to continued African–European plate convergence. Both prominent faults presently act as reverse faults with a movement sense towards the southeast, which is clearly at variance with the commonly inferred dextral or sinistral strike–slip motions on these faults. We argue that the prominent faults form part of a larger scale zone of post‐Messinian shortening made up of SSE‐ and NNW‐directed reverse faults and NE to ENE‐trending folds including thrust‐related fault‐bend folds and fault‐propagation folds, transected and displaced by, respectively, WNW‐ and NNE‐trending, dextral and sinistral strike–slip (tear or transfer) faults.  相似文献   

11.
The Middle Devonian Kvamshesten Basin in western Norway is a late-orogenic basin situated in the hangingwall of the regional extensional Nordfjord–Sogn Detachment Zone. The basin is folded into a syncline with the axis subparallel to the ductile lineations in the detachment zone. The structural and stratigraphic development of the Kvamshesten Basin indicates that the basin history is more complex than hitherto recognized. The parallelism stated by previous workers between mylonitic lineation below the basin and intrabasinal fold axes is only partly reflected in the configuration of sedimentary units and in the time-relations between deposits on opposing basin margins. The basin shows a pronounced asymmetry in the organization and timing of sedimentary facies units. The present northern basin margin was characterized by bypass or erosion at the earliest stage of basin formation, but was subsequently onlapped and eventually overlain by fanglomerates and sandstones organized in well-defined coarsening-upwards successions. The oldest and thickest depositional units are situated along the present southern basin margin. This as well as onlap relations towards basement at low stratigraphic level indicates a significant component of southwards tilt of the basin floor during the earliest stages of deposition. The inferred south-eastwards tilt was most likely produced by north-westwards extension during early stages of basin formation. Synsedimentary intrabasinal faults show that at high stratigraphic levels, the basin was extending in an E–W as well as a N–S direction. Thus, the basin records an anticlockwise rotation of the syndepositional strain field. In addition, our observations indicate that shortening normal to the extension direction cannot have been both syndepositional and continuous, as suggested by previous authors. Through most of its history, the basin was controlled by a listric, ramp-flat low-angle fault that developed into a scoop shape or was flanked by transfer faults. The basin-controlling fault was rooted in the extensional mylonite zone. Sedimentation was accompanied by formation of a NE- to N-trending extensional rollover fold pair, evidenced by thickness variations in the marginal fan complexes, onlap relations towards basement and the fanning wedge geometry displayed by the Devonian strata. Further E–W extension was accompanied by N–S shortening, resulting in extension-parallel folds and thrusts that mainly post-date the preserved basin stratigraphy. During shortening, conjugate extensional faults were rotated to steeper dips on the flanks of a basin-wide syncline and re-activated as strike-slip faults. The present scoop-shaped, low-angle Dalsfjord fault cross-cut the folded basin and juxtaposed it against the extensional mylonites in the footwall of the Nordfjord–Sogn detachment. Much of this juxtaposition may post-date sedimentation in the preserved parts of the basin. Basinal asymmetry as well as variations in this asymmetry on a regional scale may be explained by the Kvamshesten and other Devonian basins in western Norway developing in a strain regime affected by large-scale sinistral strike-slip subparallel to the Caledonian orogen.  相似文献   

12.
For seven weeks, a temporary network of 68 seismological stations was operated in Central Greece, in the region of Thessaly and Evia, located at the western termination of the North Anatolian Fault system. We recorded 510 earthquakes and computed 80 focal mechanisms. Seismic activity is associated with the NE–SW dextral North Aegean Fault, or with very young E–W-striking normal faults that are located around the Gulf of Volos and the Gulf of Lamia. The important NW–SE-striking faults bounding the Pilion, or the basins of Larissa and Karditsa, are not seismically active, suggesting that it is easier to break continental crust, creating new faults perpendicular to the principal stresses, than to reactivate faults that strike obliquely to the principal stress axes  相似文献   

13.
The China–Mongolia border region contains many late Mesozoic extensional basins that together constitute a regionally extensive basin system. Individual basins within the system are internally composed of a family of sub‐basins filled with relatively thin sedimentary piles mostly less than 5 km in thickness. There are two types of sub‐basins within the basins, failed and combined, respectively. The failed sub‐basins are those that failed to continue developing with time. In contrast, the combined ones are those that succeeded in growing by coalescing adjacent previously isolated sub‐basins. Thus, a combined sub‐basin is bounded by a linked through‐going normal fault that usually displays a corrugated trace on map view and a shallower dip on cross‐section. Along‐strike existence of discrete depocenters and alternation of sedimentary wedges of different types validate the linkage origin of combined sub‐basins. Localized high‐strain extension resulted in large‐amount displacement on linked faults, but contemporaneously brought about the cessation of some isolated fault segments and the formation of corresponding failed sub‐basins in intervening areas between active linked faults. Some combined sub‐basins might have evolved into supradetachment basins through time, concurrent with rapid denudation of footwall rocks and formation of metamorphic core complexes in places. A tectonic scenario of the broad basin system can be envisioned as an evolution from early‐stage distributed isolated sub‐basins to late‐stage focused combined or/and supradetachment sub‐basins bounded by linked faults, accompanied by synchronous cessation of some early‐formed sub‐basins. Initiation of the late Mesozoic extension is believed to result from gravitational collapse of the crust that had been overthickened shortly prior to the extension. Compression, arising from collision of Siberia and the amalgamated North China–Mongolia block along the Mongol–Okhotsk suture in the time interval from the Middle to Late Jurassic, led to significant shortening and thickening over a broad area and subsequent extensional collapse. Pre‐ and syn‐extensional voluminous magmatism must have considerably reduced the viscosity of the overthickened crust, thereby not only facilitating the gravitational collapse but enabling the lower‐middle crust to flow as well. Flow of a thicker crustal layer is assumed to have occurred coevally with upper‐crustal stretching so as to diminish the potential contrast of crustal thickness by repositioning materials from less extended to highly extending regions. Lateral middle‐ and lower‐crustal flow and its resultant upward push upon the upper crust provide a satisfying explanation for a number of unusual phenomena, such as supracrustal activity of the extension, absence or negligibleness of postrift subsidence of the basin system, less reduction of crustal thickness after extension, and non‐compression‐induced basin inversion, all of which have been paradoxical in the previous study of the late Mesozoic basin tectonics in the China–Mongolia border region.  相似文献   

14.
ten Veen  & Postma 《Basin Research》1999,11(3):223-241
Six time-slice reconstructions in the form of palaeogeographical maps show the large-scale tectonic and sedimentary evolution of the Hellenic outer-arc basins in central and eastern Crete for the middle and late Miocene. The reconstructions are based on extensive field mapping and a detailed chronostratigraphy. Latest compressional features related to subduction and associated crustal thickening are poorly dated and assigned a middle Miocene age. These are possibly contemporaneous with widespread occurrence of breccia deposits all over Crete. The precise date for the onset of extension, possibly controlled by the roll-back of the subsiding African lithosphere, remains at this point a discussion. We present circumstantial evidence to place the beginning of the roll back in the middle Miocene, during the accumulation of an arc-parallel, westward-draining fluvial complex. The continental succession is transgressed steadily until it is interrupted by an important tectonic event at the boundary of the middle and late Miocene (normally seen as the onset of slab roll-back). In the earliest late Miocene a few large-sized fault blocks along arc-parallel normal faults subsided rapidly causing a deepening of the half-graben basins up to approximately 900 m. About 1 Myr later, a new N020E and N100E fault system developed fragmenting the existing half-grabens into orthogonal horst and graben structure. The development of the new fault system caused original continental regions to subside and original deep basins to emerge, which is not easy to reconcile with roll back controlled extensional processes alone. Underplating and inherited basement structure may have played here an additional role, although evidence for firm conclusions is lacking. In late Miocene times (late Tortonian, ≈7.2 Ma), the extensional outer arc basins become deformed by N075E-orientated strike-slip. The new tectonic regime begins with strong uplift along existing N100E fault zones, which developed about E–W-striking topographical highs (e.g. Central Iraklion Ridge and Anatoli anticline) in about 0.4 Myr. The strong uplift is contemporaneous with abundant landsliding observed along an important N075E fault zone crossing eastern Crete and with renewed volcanic activity of the arc. The origin of the ridges may be due to active folding related to the sinistral slip.  相似文献   

15.
Lithospheric folding is an important mode of basin formation in compressional intraplate settings. Basins formed by lithospheric folding are characterized by distinct features in subsidence history. A comparison with extensional basins, foreland basins, intracratonic basins and pull‐apart basins provides criteria for the discrimination between these modes of basin formation. These findings are important in deciphering the feedbacks between tectonics and surface processes. In addition, inferences on accommodation space and thermal regime have important consequences for hydrocarbon maturity. Lithospheric folding is coupled to compressional reactivation of basins and faults, and therefore, strongly affects reservoir characteristics of sedimentary basins.  相似文献   

16.
A new subtype of Gilbert-type fan deltas, ‘the trapezoidal fan delta’, characterized by the absence of bottomset deposits, is recognized in the south-western active margins of the Corinth rift in central Greece. They are formed adjacent to master extensional listric faults and developed by progradation either onto a subaqueous basin escarpment or across a subaerial platform where alluvial fans have accumulated. Simultaneously with master fault activity, displacements on counter faults along intrabasinal basement highs produced fan delta foreset deposits. Furthermore, footwall imbrication and uplift along the listric faults, as well as transfer fault displacement, have strongly influenced the pattern of fan delta sedimentation.  相似文献   

17.
Subsidence analyses from the Betic Cordillera, southeast Spain   总被引：1，自引：0，他引：1  
Fifty‐four Mesozoic–Cenozoic stratigraphic sections from the Betic Cordillera of southeast Spain have been analysed in order to estimate the timing and amount of lithospheric stretching that occurred at the western end of the Tethyan Ocean since the Hercynian Orogeny. The standard backstripping technique has been used in order to calculate the water‐loaded subsidence of basement for each section. Water‐loaded subsidence curves were then inverted in order to determine the variation of lithospheric strain rate as a function of time, which yields estimates of timing, magnitude and intensity of stretching. Rifting commenced during the Late Permian/Early Triassic times and continued intermittently throughout the Mesozoic in response to the opening of the Tethyan Ocean to the east and the opening of the Atlantic Ocean to the west. Two major events in the Permo‐Triassic/Early Jurassic and the Late Jurassic/Early Cretaceous can be clearly identified. Stretching factors are generally small (1.1–1.25) probably because the Betic Cordillera was located at the westernmost end of the Tethys. Peak strain rates of ～10?15 s?1 were obtained for Mesozoic rift events and these values are in broad agreement with those obtained throughout the Tethyan Realm. We have also analysed the Neogene extensional event, which played an important role in forming the existing Mediterranean Sea. A combination of well‐log information and calibrated seismic reflection data was modelled. Peak strain rates in these younger basins are almost one order of magnitude faster than those estimated for the Mesozoic basins. These higher values appear to be typical of back‐arc extensional basins elsewhere. To the west and north of the Betic Cordillera, the Guadalquivir foreland basin developed as extension took place further east. Backstripped sections from this basin clearly record the northward migration of foreland basin subsidence through time.  相似文献   

18.
Our current understanding on sedimentary deep-water environments is mainly built of information obtained from tectonic settings such as passive margins and foreland basins. More observations from extensional settings are particularly needed in order to better constrain the role of active tectonics in controlling sediment pathways, depositional style and stratigraphic stacking patterns. This study focuses on the evolution of a Plio-Pleistocene deep-water sedimentary system (Rethi-Dendro Formation) and its relation to structural activity in the Amphithea fault block in the Corinth Rift, Greece. The Corinth Rift is an active extensional basin in the early stages of rift evolution, providing perfect opportunities for the study of early deep-water syn-rift deposits that are usually eroded from the rift shoulders due to erosion in mature basins like the Red Sea, North Sea and the Atlantic rifted margin. The depocentre is located at the exit of a structurally controlled sediment fairway, approximately 15 km from its main sediment source and 12 km basinwards from the basin margin coastline. Fieldwork, augmented by digital outcrop techniques (LiDAR and photogrammetry) and clast-count compositional analysis allowed identification of 16 stratigraphic units that are grouped into six types of depositional elements: A—mudstone-dominated sheets, B—conglomerate-dominated lobes, C—conglomerate channel belts and sandstone sheets, D—sandstone channel belts, E—sandstone-dominated broad shallow lobes, F—sandstone-dominated sheets with broad shallow channels. The formation represents an axial system sourced by a hinterland-fed Mavro delta, with minor contributions from a transverse system of conglomerate-dominated lobes sourced from intrabasinal highs. The results of clast compositional analysis enable precise attribution for the different sediment sources to the deep-water system and their link to other stratigraphic units in the area. Structures in the Amphithea fault block played a major role in controlling the location and orientation of sedimentary systems by modifying basin-floor gradients due to a combination of hangingwall tilt, displacement of faults internal to the depocentre and folding on top of blind growing faults. Fault activity also promoted large-scale subaqueous landslides and eventual uplift of the whole fault block.  相似文献   

19.
The Kocaçay Basin (KÇB) is a key area in western Anatolia – a well‐known extended terrane where regional segmentation has received limited attention – for investigating strike‐slip faults kinematically linked to detachment faults. In this paper, we present results of an integrated sedimentologic, stratigraphic, and structural study of Miocene alluvial fan/fan‐delta/lacustrine deposits that accumulated in the KÇB, a NE‐trending basin with connections to the Menderes Metamorphic Core Complex (MCC). We mapped and evaluated most of the key faults in the KÇB, many for the first time, and recognised different deformation events in the study area near the E margin of the MCC. We also present field evidence for kinematic connections between low‐angle normal and strike‐slip faults which were developed in an intermittently active basement‐involved transfer zone in western Anatolia. We find that the KÇB contains a detailed record of Miocene transtensional sedimentation and volcanism that accompanied exhumation of the MCC. Structural data reveal that the basin was initially formed by transtension (D1 phase) and subsequently uplifted and deformed, probably as a result of early Pliocene wrench‐ to extension‐dominated deformation (D2 phase) overprinted by Plio‐Quaternary extensional tectonics (D3 phase). These results are consistent with progressive deformation wherein the axis of maximum extension remained in the horizontal plane but the intermediate and maximum shortening axes switched position in the vertical plane. Combining our results with published studies, we propose a new working hypothesis that the KÇB was a transtensional supradetachment basin during the Miocene. The hypothesis could provide new insights into intermittently active extension‐parallel zone of weakness in western Anatolia.These results also suggest that the termination of low‐angle normal fault systems within an extension parallel transfer zone may have resulted in a transtensional depressions which are different from classical supradetachment basins with respect to the sedimentation and deformational pattern of the basin infills.  相似文献   

20.
The style of extension and strain distribution during the early stages of intra-continental rifting is important for understanding rift-margin development and can provide constraints for lithospheric deformation mechanisms. The Corinth rift in central Greece is one of the few rifts to have experienced a short extensional history without subsequent overprinting. We synthesise existing seismic reflection data throughout the active offshore Gulf of Corinth Basin to investigate fault activity history and the spatio-temporal evolution of the basin, producing for the first time basement depth and syn-rift sediment isopachs throughout the offshore rift. A major basin-wide unconformity surface with an age estimated from sea-level cycles at ca . 0.4 Ma separates distinct seismic stratigraphic units. Assuming that sedimentation rates are on average consistent, the present rift formed at 1–2 Ma, with no clear evidence for along-strike propagation of the rift axis. The rift has undergone major changes in relative fault activity and basin geometry during its short history. The basement depth is greatest in the central rift (maximum ∼3 km) and decreases to the east and west. In detail however, two separated depocentres 20–50 km long were created controlled by N- and S-dipping faults before 0.4 Ma, while since ca . 0.4 Ma a single depocentre (80 km long) has been controlled by several connected N-dipping faults, with maximum subsidence focused between the two older depocentres. Thus isolated but nearby faults can persist for timescales ca . 1 Ma and form major basins before becoming linked. There is a general evolution towards a dominance of N-dipping faults; however, in the western Gulf strain is distributed across several active N- and S-dipping faults throughout rift history, producing a more complex basin geometry.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号