排序方式： 共有30条查询结果，搜索用时 15 毫秒
1.
This study describes the stratigraphic and palaeoenvironmental significance of the Lower-“middle” Oligocene sediments based on the fauna from the Delikarkas? Formation and the microflora from the ?ncesu Formation of the ?ncesu area (northern part of the western Taurides, Isparta province, Turkey). In the area, the Oligocene sediments show a regressive succession, which begins with the limestones of the Delikarkas? Formation indicating marine conditions followed by conglomerates, sandstones and coaly mudstones of alluvial and fluvial (shallow marine-continental) origin. A well preserved foraminiferal assemblage including Nummulites intermedius, Nummulites vascus and Halkyardia maxima proves an Early Oligocene age for the Delikarkas? Formation. Due to palynological markers such as Boehlensipollis hohli, Slowakipollis hippophaëoides, Dicolpopollis kockelii, Magnolipollis neogenicus ssp. minor, Plicapollis pseudoexcelsus, Caryapollenites simplex and Intratriporopollenites instructus the ?ncesu Formation, which concordantly rests on the Delikarkas? Formation, may be assigned to the Early-“middle” Oligocene. From the palynomorph assemblage, three zones have been recognised according to abundance of species. Zone 1 is characterized by predominance of C. simplex and Momipites punctatus and rarely presence of tricolpate and tricolporate pollen. Zone 2 consists mainly of Inaperturopollenites dubius, Leiotriletes maxoides ssp. maximus, Verrucatosporites favus, Verrucatosporites alienus and infrequently marine dinoflagellate cysts. Zone 3 is characterized by a high percentage of ferns such as Echinatisporis?chattensis and Polypodiaceoisporites saxonicus. The presence of marine dinoflagellate cysts like Apectodinium sp. and Cleistosphaeridium sp., back-mangrove elements such as Acrostichum aureum and lepidocaryoid palms (e.g. Longapertites discordis, Longapertites punctatus and Longapertites psilatus) in the sediments of the ?ncesu Formation imply coastal or near-coastal conditions. Terrestrial palynomorphs in more inland settings were transported by running water towards the sea. Conifers are represented by poorly preserved and rare pollen grains of Pityosporites, Cathayapollis and Piceapollis which may have been transported by wind. In this study, the terrestrial climate of the ?ncesu Formation is also discussed on the basis of the Coexistence Approach method. The climate was warm at the coast (over 20 °C), as evidenced by A. aureum and lepidocaryoid palms, whereas there was a mean annual temperature of 17.2–17.4 °C must be assumed for the upland environment(s). 相似文献
2.
The Kocaçay Basin (KÇB) is a key area in western Anatolia – a well‐known extended terrane where regional segmentation has received limited attention – for investigating strike‐slip faults kinematically linked to detachment faults. In this paper, we present results of an integrated sedimentologic, stratigraphic, and structural study of Miocene alluvial fan/fan‐delta/lacustrine deposits that accumulated in the KÇB, a NE‐trending basin with connections to the Menderes Metamorphic Core Complex (MCC). We mapped and evaluated most of the key faults in the KÇB, many for the first time, and recognised different deformation events in the study area near the E margin of the MCC. We also present field evidence for kinematic connections between low‐angle normal and strike‐slip faults which were developed in an intermittently active basement‐involved transfer zone in western Anatolia. We find that the KÇB contains a detailed record of Miocene transtensional sedimentation and volcanism that accompanied exhumation of the MCC. Structural data reveal that the basin was initially formed by transtension (D1 phase) and subsequently uplifted and deformed, probably as a result of early Pliocene wrench‐ to extension‐dominated deformation (D2 phase) overprinted by Plio‐Quaternary extensional tectonics (D3 phase). These results are consistent with progressive deformation wherein the axis of maximum extension remained in the horizontal plane but the intermediate and maximum shortening axes switched position in the vertical plane. Combining our results with published studies, we propose a new working hypothesis that the KÇB was a transtensional supradetachment basin during the Miocene. The hypothesis could provide new insights into intermittently active extension‐parallel zone of weakness in western Anatolia.These results also suggest that the termination of low‐angle normal fault systems within an extension parallel transfer zone may have resulted in a transtensional depressions which are different from classical supradetachment basins with respect to the sedimentation and deformational pattern of the basin infills. 相似文献
3.
Serkan Üner Gülçin Özürlan Ağaçgözgü Doğa Düşünür Doğan 《Geophysical Prospecting》2019,67(8):2176-2195
Western Anatolia hosts many low-to-moderate and high-temperature geothermal sources in which active faults play a dominant role to control the recharge and the discharge of geothermal fluid. In this study, we used the two-dimensional geoelectric structure of Kütahya Hisarcık geothermal field, and created a conceptual hydrogeophysical model that includes faults, real topographical variations and geological units. The temperature distribution and fluid flow pattern are also investigated. The depth extension of Hisarcık Fault, electrical basement and low resistivity anomalies related to the presence of geothermal fluid are determined by using resistivity studies in the area. Numerical simulations suggest that Hisarcık fault functioning as a fluid conduit primarily enables hot fluid to be transported from depth to the surface. It is shown that the locations of predicted outflow vents coincide with those of hot springs in the area. 相似文献
4.
Radiometric and palynological data of the Upper Oligocene–Lower Miocene Soma Formation from the Kalk?m-Gönen Basin yield new results related to age and palynological contents. In this study, Upper Oligocene strata from the Dani?ment and Linfa areas and Lower Miocene strata from the Bengiler area were sampled palynologically and for radiometric dating. The Dani?ment assemblage, which is older than the Linfa assemblages, mainly contains coniferous and evergreen to deciduous mixed mesophytic forest elements. Relatively high quantities of the altitudinal plants Picea and Abies, indicate a cooler palaeoclimate. The Linfa associations mainly include coniferous and riparian elements. Pollen of the riparian plant Alnus and Taxodiaceae indicative for the swamp forest community was predominant, probably as a result of a high lake level. There is a hiatus during the Oligocene–Miocene transition, probably showing a non-depositional phase and sea-level fall indicating the Mi-1 glaciation event. Higher in the sequence, the Aquitanian Bengiler sediments include high amounts of coniferous forest elements as well as components indicative for the evergreen and deciduous mesophytic forest and also riparian forest and swamp forest. Due to presence of thermophilous taxa Reveesia, Mastixiaceae and Arecaceae, a warm and humid palaeoclimate is inferred according to quantitative analyses using the Coexistence Approach. 相似文献
5.
A statistical analysis is made for the eastern part of Turkey in the beginning of 2009 by studying the phenomenon of seismic quiescence as a potential precursor of the main shocks. The results produced four areas having seismic quiescence in the beginning of 2009. These areas are observed to be centered at 39.96°N–40.69°E (around A?kale, Erzurum), 39.36°N–39.74°E (around Ovac?k, Tunceli), 39.02°N–40.52°E (including Elaz?? and Bingöl), and 38.45°N–42.94°E (Van Lake). Based on the recent results showing 5 ± 1.5 years quiescence before the occurrence of an earthquake in this region, the future earthquake would be expected between 2009.5 and 2010.5. The future earthquake occurrence may reach 2012 if we consider the standard deviation of average seismic quiescence as ±1.5 years. We have found that the M W = 6.0 Elaz?? earthquake on 8 March 2010, followed a seismic quiescence starting about 5 years before the main shock. Thus, special interest should be given to the other regions where the seismic quiescence is observed. 相似文献
6.
Celalettin Özdemir Hayrunnisa Tezcan Serkan Sahinkaya Erkan Kalipci 《洁净——土壤、空气、水》2010,38(12):1152-1158
The removal of chemical oxygen demand (COD) and phenol from olive oil mill wastewaters (OOMW) was investigated experimentally by using conventional Fenton (CFP) and Fenton type processes (FTP) with zero valent iron (ZVI). Different operational parameters such as initial pH, Fe2+, Fe0, and H2O2 concentrations were examined. Kinetic studies in terms of COD and phenol removals for both CFP and FTP were performed. The original pH value (4.6) of OOMW for CFP was found as the optimum pH. The determined optimum conditions are [Fe2+] = 1500 mg L?1, [H2O2] = 1750 mg L?1, and pH = 4.6 for CFP; [Fe0] = 2000 mg L?1, [H2O2] = 2000 mg L?1, and pH = 3 for FTP. 82.4% COD and 62% phenol removals were performed under the optimum conditions by CFP, while 82% COD and 63.4% phenol were removed by FTP. According to the results of kinetic studies, it was observed that COD and phenol were removed by FTP more rapidly, compared to CFP. Consequently, it was determined that both CFP and FTP were effective processes for the pretreatment of OOMW. 相似文献
7.
Serkan Sayin Fatih Ozcan Mustafa Yilmaz Ali Tor Shahabuddin Memon Yunus Cengeloglu 《洁净——土壤、空气、水》2010,38(7):639-648
In this study, 5,17‐bis‐[(4‐benzylpiperidine)methyl]‐25,26,27,28‐tetrahydroxy‐calix[4]arene ( 3 ) has been prepared by the treatment of calix[4]arene with a secondary amine (4‐benzylpiperidine) and formaldehyde by means of Mannich reaction. The prepared Mannich base ( 3 ) has been grafted onto [3‐(2,3‐epoxypropoxy)‐propyl]‐trimethoxysilane‐modified Fe3O4 magnetite nanoparticles (EPPTMS‐MN) in order to obtain 5,17‐bis‐[(4‐benzylpiperidine)methyl]‐25,26,27,28‐tetrahydroxy calix[4]arene‐grafted EPPTMS‐MN (BP‐calix[4]arene‐grafted Fe3O4). All new compounds were characterized by a combination of FTIR and 1H‐NMR analyses. The morphology of the magnetic nanoparticles was examined by transmission electron microscopy. Moreover, the studies regarding the removal of arsenate and dichromate ions from the aqueous solutions were also carried out by using 5,17‐bis‐[(4‐benzylpiperidine)methyl]‐25,26,27,28‐tetrahydroxy‐calix[4]arene in liquid–liquid extraction and BP‐calix[4]arene‐grafted Fe3O4 ( 4 ) in solid–liquid extraction experiments. The extraction results indicated that 3 is protonated at proton‐switchable binding sites in acidic conditions. Hence, facilitating binding of arsenate and dichromate is resulted from both electrostatic interactions and hydrogen bonding. To understand the selectivity of 3 , the retention of dichromate anions in the presence of Cl−, NO, and SO anions at pH 1.5 was also examined. 相似文献
8.
Several catalogues of global earthquakes reported for the time period from 1900 to 2000 have been compiled to examine lateral variations of the modal (a/b) values as derived from the Gutenberg–Richter empirical law. For this purpose, the world was divided into 27 different seismic regions in terms of tectonic environments. The parameters a and b were calculated using the least-squares method. The modal values computed for each region were used to produce a global map of the modal values using a grid space of 3°. The results show that a and b-values do not always supply much information about tectonic environments of the different regions. It is observed that the modal values estimated for different tectonic regions are consistent with seismicity of the world and represent global seismic sources better than a or b values. The highest modal values have been found in the oceanic subduction zones, and the lowest values in the oceanic ridges. Lowest b values are observed in trenches. These observations suggest that there is a correlation between apparent stresses and b values. Mapping of the modal values provides detailed images of the zones presenting low and high seismic activity and it may be used as a measure of seismic potential sources and relative hazard levels. 相似文献
9.
Serkan Ural Ejaz Hussain Jie Shan 《International Journal of Applied Earth Observation and Geoinformation》2011
Geospatial distribution of population at a scale of individual buildings is needed for analysis of people's interaction with their local socio-economic and physical environments. High resolution aerial images are capable of capturing urban complexities and considered as a potential source for mapping urban features at this fine scale. This paper studies population mapping for individual buildings by using aerial imagery and other geographic data. Building footprints and heights are first determined from aerial images, digital terrain and surface models. City zoning maps allow the classification of the buildings as residential and non-residential. The use of additional ancillary geographic data further filters residential utility buildings out of the residential area and identifies houses and apartments. In the final step, census block population, which is publicly available from the U.S. Census, is disaggregated and mapped to individual residential buildings. This paper proposes a modified building population mapping model that takes into account the effects of different types of residential buildings. Detailed steps are described that lead to the identification of residential buildings from imagery and other GIS data layers. Estimated building populations are evaluated per census block with reference to the known census records. This paper presents and evaluates the results of building population mapping in areas of West Lafayette, Lafayette, and Wea Township, all in the state of Indiana, USA. 相似文献
10.
Mahdi Zoorabadi Serkan Saydam Wendy Timms Bruce Hebblewhite 《Geomechanics and Geoengineering》2016,11(3):189-200
Roughness on rock joints produces a variable aperture across the joints and increases the flow path length. These conditions should be taken into account for a good approximation from cubic law. In this paper, the concept of local true aperture and tortuosity is applied to assumed joints where surfaces are matched to each other and correspond with standard Joint Roughness Coefficient (JRC) profiles. Furthermore, the hydraulic behaviour of JRC profiles is studied by a new laboratory experiment setup. The analytical approach provides new insights into the effects of roughness on hydraulic properties of rock joints. The results indicate that for a constant mechanical aperture, both the minimum local aperture and hydraulic aperture decrease with increasing JRC. Furthermore, tortuosity and standard deviation of local true aperture increase with JRC increment. The trend obtained between different parameters and JRC shows an obvious fluctuation for JRC lower than 10. On one hand, the results of this study along with a critical review of previous studies demonstrate that JRC profiles cannot present a precise roughness increment when JRC is less than 10. A new laboratory setup was designed to study the flow behaviour of JRC profiles. The results obtained from laboratory experiments under linear flow conditions validate the accuracy of the applied analytical method. 相似文献