共查询到20条相似文献,搜索用时 31 毫秒
1.
Leiv -J. Gelius 《Studia Geophysica et Geodaetica》2012,56(2):433-456
An accurate, fast, and simple algorithm for 3-D acoustic modelling of seismic edge diffractions, originally developed in the 1980s, is revisited in this paper. The main objective is to reintroduce this simple approach to edge-diffraction modelling and for the first time give the details of the theory in the open literature. The method is based on a combination of Kirchhoff theory and uniform asymptotic techniques developed within a high-frequency assumption. The diffraction contributions are then computed at stationary edge points only, by analogy with the geometrical ray contributions associated with internal stationary points or specular points. To be able to handle sampling inaccuracies of the critical edge points, a modified algorithm is proposed. Its robustness is verified in case of scattering from a circular edge. Also the extension from rigid or free boundary conditions to the case of edges defined by two penetrable surfaces is discussed in this paper. Both experimental and synthetic 3-D data are presented to demonstrate the potential of this edge-diffraction modelling technique. Since all parameters needed in the computations are obtained from dynamic ray tracing, the algorithm can readily be incorporated in existing software packages for 3-D seismic ray modelling. 相似文献
2.
在许多地震反演和偏移成像方法中,都要涉及到射线路径和旅行时的计算.本文将波前面三角形网格剖分和三维波前重建法射线追踪技术结合使用,实现了射线路径和旅行时的准确快速计算.三维波前重建法射线追踪过程中可以保证稳定合理的射线密度,克服了常规射线追踪方法存在阴影区的问题.波前面三角形网格剖分在描述和拆分波前面时更加准确有效,而且不需太多的网格数目,从而提高了射线追踪的精度和效率.该方法在三维复杂构造成像方面有独特的优势,目前在实际的Kirchhoff 偏移中的已经有相关应用. 相似文献
3.
4.
The recursive nature of rays in blocky models can be exploited to solve some difficult problems in seismic modelling. Each segment of a ray travels from an initial point up to a reflecting interface, where it is split into reflected and transmitted ray segments, which each continue in a similar way. The tree structure that thus emanates is conveniently handled by a recursive scheme. Recursion allows an automatic generation of all phases on a seismogram, together with all information necessary to analyse or select them. By operating recursively with a ray cell, bounded by a pair of vicinal rays in 2D, or a triplet of vicinal rays in 3D, and two successive isochrons, the two-point ray-tracing problem is reduced to a simple interpolation. Also, the cellular approach allows for a stable and robust evaluation of dynamic ray quantities without any paraxial tracing, which is cumbersome in blocky models of realistic complexity. Geometric shadows are filled by recursively generated diffractions. The recursive ray tracer has found applications in the fast computation of Green's functions in target-oriented inversion and in phase identification in VSP. 相似文献
5.
Seismic amplitude variations with offset contain information about the elastic parameters. Prestack amplitude analysis seeks to extract this information by using the variations of the reflection coefficients as functions of angle of incidence. Normally, an approximate formula is used for the reflection coefficients, and variations with offset of the geometrical spreading and the anelastic attenuation are often ignored. Using angle of incidence as the dependent variable is also computationally inefficient since the data are recorded as a function of offset. Improved approximations have been derived for the elastic reflection and transmission coefficients, the geometrical spreading and the complex travel-time (including anelastic attenuation). For a 1 D medium, these approximations are combined to produce seismic reflection amplitudes (P-wave, S-wave or converted wave) as a Taylor series in the offset coordinate. The coefficients of the Taylor series are computed directly from the parameters of the medium, without using the ray parameter. For primary reflected P-waves, dynamic ray tracing has been used to compute the offset variations of the transmission coefficients, the reflection coefficient, the geometrical spreading and the anelastic attenuation. The offset variation of the transmission factor is small, while the variations in the geometrical spreading, absorption and reflection coefficient are all significant. The new approximations have been used for seismic modelling without ray tracing. The amplitude was approximated by a fourth-order polynomial in offset, the traveltime by the normal square-root approximation and the absorption factor by a similar expression. This approximate modelling was compared to dynamic ray tracing, and the results are the same for zero offset and very close for offsets less than the reflector depth. 相似文献
6.
各向异性射线理论基础上的局部角度域叠前深度偏移方法能够为深度域构造成像与基于角道集的层析反演提供有力支撑,但是对于复杂地质构造而言,高斯度叠前深度偏移在不失高效、灵活等特点的情况下,具有明显的精度优势.为此,本文研究局部角度域理论框架下的高斯束叠前深度偏移方法.为提高算法效率与实用性,文中讨论了一种从经典弹性参数表征的各向异性介质运动学和动力学射线方程演变而来的由相速度表征的简便形式,并提出了一种比较经济的各向异性高斯束近似合成方案.结合地震波局部角度域成像原理,讨论一种适合高斯束偏移的角度参数计算方法.国际上通用的理论模型合成数据试验表明:相比局部角度域Kirchhoff叠前深度偏移成像方法,本文方法具有更高的成像精度与抗噪能力,既适用于复杂构造成像,也可为TI介质深度域偏移速度分析与模型建立提供高效的偏移引擎. 相似文献
7.
8.
Konstantin Tertyshnikov Roman Pevzner Andrej Bóna Faisal Alonaizi Boris Gurevich 《Geophysical Prospecting》2015,63(3):525-533
Hard rock seismic exploration normally has to deal with rather complex geological environments. These types of environments are usually characterized by a large number of local heterogeneity (e.g., faults, fracture zones, and steeply dipping interfaces). The seismic data from such environments often have a poor signal‐to‐noise ratio because of the complexity of hard rock geology. To be able to obtain reliable images of subsurface structures in such geological conditions, processing algorithms that are capable of handling seismic data with a low signal‐to‐noise ratio are required for a reflection seismic exploration. In this paper, we describe a modification of the 3D Kirchhoff post‐stack migration algorithm that utilizes coherency attributes obtained by the diffraction imaging algorithm in 3D to steer the main Kirchhoff summation. The application to a 3D synthetic model shows the stability of the presented steered migration to the presence of high level of the random noise. A test on the 3D seismic volume, acquired on a mine site located in Western Australia, reveals the capability of the approach to image steep and sharp objects such as fracture and fault zones and lateral heterogeneity. 相似文献
9.
10.
Many joint inversion schemes use 1D forward modelling in the integrated interpretation of various geophysical data. In extending the joint inversion approach to the investigation of 2D structures, the discretization of the model parameters and the appropriate choice of the forward‐modelling procedure play a very important role. In this paper, a hybrid seismic–geoelectric joint inversion method is proposed for the investigation of 2D near‐surface geological structures. The electric and seismic models are coupled together through the use of common boundaries between the adjacent layers. Assuming a 2D model composed of homogeneous layers with curved boundaries, a fast ray‐tracing algorithm is used for the calculation of refraction seismic traveltime data. In the geoelectric forward modelling, a locally 1D approximation is used. The boundary surfaces are written in the form of series expansion; the inversion algorithms are formulated for the expansion coefficients and the petrophysical parameters as unknowns. Two versions of the inversion method are proposed: in versions A and B, interval‐wise constant functions and Chebyshev polynomials are, respectively, used as basis functions of the series expansion. The versions are tested by means of synthetic and in situ measured data. The tests show that both methods are stable and accurate. 相似文献
11.
Paraxial ray methods have found broad applications in the seismic ray method and in numerical modelling and interpretation
of high-frequency seismic wave fields propagating in inhomogeneous, isotropic or anisotropic structures. The basic procedure
in paraxial ray methods consists in dynamic ray tracing. We derive the initial conditions for dynamic ray equations in Cartesian
coordinates, for rays initiated at three types of initial manifolds given in a three-dimensional medium: 1) curved surfaces
(surface source), 2) isolated points (point source), and 3) curved, planar and non-planar lines (line source). These initial
conditions are very general, valid for homogeneous or inhomogeneous, isotropic or anisotropic media, and for both a constant
and a variable initial travel time along the initial manifold. The results presented in the paper considerably extend the
possible applications of the paraxial ray method. 相似文献
12.
Gaussian beam is an important complex geometrical optical technology for modeling seismic wave propagation and diffraction in the subsurface with complex geological structure. Current methods for Gaussian beam modeling rely on the dynamic ray tracing and the evanescent wave tracking. However, the dynamic ray tracing method is based on the paraxial ray approximation and the evanescent wave tracking method cannot describe strongly evanescent fields. This leads to inaccuracy of the computed wave fields in the region with a strong inhomogeneous medium. To address this problem, we compute Gaussian beam wave fields using the complex phase by directly solving the complex eikonal equation. In this method, the fast marching method, which is widely used for phase calculation, is combined with Gauss–Newton optimization algorithm to obtain the complex phase at the regular grid points. The main theoretical challenge in combination of this method with Gaussian beam modeling is to address the irregular boundary near the curved central ray. To cope with this challenge, we present the non-uniform finite difference operator and a modified fast marching method. The numerical results confirm the proposed approach. 相似文献
13.
射线追踪是地震波走时层析成像的基础,射线空间位置的准确性及射线走时的精度决定了层析成像的可靠性.本文根据哈密尔顿系统可以有效提高程函方程解稳定性的特性,采用辛几何算法(SAM-Symplectic Algorithm Method)及二维三次卷积插值技术进行地震波射线追踪.由于采用了SAM算法,保证了地震波波前精度,提高了射线空间位置的准确性.数值模拟结果表明SAM既能保证哈密尔顿系统的稳定性又具有运算速度快的特点,提高了射线追踪的计算精度. 相似文献
14.
The stable-beam method for forward modelling of seismic data is introduced. The method is applicable to geometries which may be approximated by a series of single-valued (in depth) interfaces separating constant-velocity layers. For models of this restricted type, the results are of similar accuracy to those from waveequation-based methods whilst the run times are similar to, or better than, those for simple ray-tracing approaches. The basis of the method is to approximate interfaces by a series of straight-line segments. This allows very rapid and stable ray tracing through the model. Pseudodiffractions are then added from all of the interface discontinuities formed between adjacent segments. These pseudodiffractions have the effect of correcting for the phase, amplitude and wavefront continuity errors introduced by the interface approximation. Comparison of the stable-beam results to analytical, Kirchhoff, finite-difference and physical model results confirm the accuracy ofthe technique. 相似文献
15.
16.
Parsimonious post‐stack migration is extended to three dimensions. By tracing single rays back along each incident wave direction (as determined by a local slant stack at the receivers), the ray tracing can be embedded in the migration. This approach significantly reduces the computer time and disk space needed because it is not necessary to build and save image time maps; 3D migration can be performed on a workstation or personal computer rather than using a supercomputer or cluster. The location of a reflector in the output image is defined by tracing a zero‐offset ray to the one‐way traveltime (the image condition); the orientation of the reflector is defined as a surface perpendicular to the raypath. The migration impulse response operator is confined to the first Fresnel zone around the estimated reflection point, which is much smaller than the large isochronic surface in traditional Kirchhoff depth migration. Additional efficiency is obtained by applying an amplitude threshold to reduce the amount of data to be migrated. Tests on synthetic data show that the proposed implementation of parsimonious 3D post‐stack Kirchhoff depth migration is at least two orders of magnitude faster than traditional Kirchhoff migration, at the expense of slightly degraded migration image coherence. The proposed migration is expected to be a useful complement to conventional time migrations for fast initial imaging of subsurface structures and for real‐time imaging of near‐offset sections during data acquisition for quality control. 相似文献
17.
A new 3D wavefield modelling approach based on dynamic ray tracing is presented. This approach is called wavefront construction, and it can be used in 3D models with constant or smoothly varying material properties (S- and P-velocity and density) separated by smooth interfaces. Wavefronts consisting of rays arranged in a triangular network are propagated stepwise through the model. At each time step, the differences in a number of parameters are checked between each pair of rays on the wavefront. New rays are interpolated whenever this difference between pairs of rays exceeds some predefined maximum value. A controlled sampling of the wavefront at all time steps is thus obtained. Receivers are given multiple-event values by interpolation when the wavefronts pass them. The strength of the wavefront construction method is that it is robust and efficient. 相似文献
18.
IndirectapproachmethodforspecifiedendpointsseismicraytracinginthredimensionalinhomogeneousmediaCHAOFANXU(徐朝繁)XIANKANGZH... 相似文献
19.
L. Fishman 《Pure and Applied Geophysics》2002,159(7-8):1637-1679
— Recently, de Hoop and coworkers developed an asymptotic, seismic inversion formula for application in complex environments supporting multi-pathed and multi-mode wave propagation (de Hoop et al., 1999; de Hoop and Brandsberg-Dahl, 2000; Stolk and de Hoop, 2000). This inversion is based on the Born/Kirchhoff approximation, and employs the global, uniform asymptotic extension of the geometrical method of “tracing rays” to account for caustic phenomena. While this approach has successfully inverted the multicomponent, ocean-bottom data from the Valhall field in Norway, accounting for severe focusing effects (de Hoop and Brandsberg-Dahl, 2000), it is not able to account properly for wave phenomena neglected in the “high-frequency” limit (i.e., diffraction effects) and strong scattering effects. To proceed further and incorporate wave effects in a nonlinear inversion scheme, the theory of directional wavefield decomposition and the construction of the generalized Bremmer coupling series are combined with the application of modern phase space and path (functional) integral methods to, ultimately, suggest an inversion algorithm which can be interpreted as a method of “tracing waves.” This paper is intended to provide the seismic community with an introduction to these approaches to direct and inverse wave propagation and scattering, intertwining some of the most recent new results with the basic outline of the theory, and culminating in an outline of the extended, asymptotic, seismic inversion algorithm. Modeling at the level of the fixed-frequency (elliptic), scalar Helmholtz equation, exact and uniform asymptotic constructions of the well-known, and fundamentally important, square-root Helmholtz operator (symbol) provide the most important results. 相似文献
20.
We present a new method of three-dimensional (3-D) seismic ray tracing, based on an improvement to the linear traveltime interpolation (LTI) ray tracing algorithm. This new technique involves two separate steps. The first involves a forward calculation based on the LTI method and the dynamic successive partitioning scheme, which is applied to calculate traveltimes on cell boundaries and assumes a wavefront that expands from the source to all grid nodes in the computational domain. We locate several dynamic successive partition points on a cell's surface, the traveltimes of which can be calculated by linear interpolation between the vertices of the cell's boundary. The second is a backward step that uses Fermat's principle and the fact that the ray path is always perpendicular to the wavefront and follows the negative traveltime gradient. In this process, the first-arriving ray path can be traced from the receiver to the source along the negative traveltime gradient, which can be calculated by reconstructing the continuous traveltime field with cubic B-spline interpolation. This new 3-D ray tracing method is compared with the LTI method and the shortest path method (SPM) through a number of numerical experiments. These comparisons show obvious improvements to computed traveltimes and ray paths, both in precision and computational efficiency. 相似文献