首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
In this paper, the generalised conditional intensity measure (GCIM) method is extended to ground motion selection for scenario earthquake ruptures. The selection algorithm is based on generating random realisations of the considered intensity measure (IM) distributions for a specific rupture scenario and then finding the prospective ground motions that best fit the realisations using an optimal amplitude scale factor. Using different rupture scenarios and site conditions, two important aspects of the GCIM methodology are scrutinised: (i) different weight vectors for the various IMs considered and (ii) quantifying the importance of replicate selections for ensembles with different numbers of desired ground motions. It is demonstrated that considering only spectral acceleration (SA) ordinates in the selection process, as is common in many conventional selection procedures, may result in selected motions with a biased representation for duration and cumulative ground motion effects. In contrast, considering IMs other than SA ordinates (in particular, significant duration, cumulative absolute velocity, and Arias intensity) results in ensembles with an appropriate representation of these IMs, without a practically significant effect on SA ordinates. The benefit of conducting replicate selections to obtain a suite of motions with an improved representation for the distribution of the considered IMs is demonstrated, and a minimum number of replicates are suggested for different ground motion ensemble sizes. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

2.
Amplitude scaling is commonly used to select ground motions matching a target response spectrum. In this paper, the effect of scaling limits on ground motion selection, based on the conditional spectrum framework, is investigated. Target spectra are computed for four probabilistic seismic hazard cases in Western United States, and 16 ground motion suites are selected using different scaling limits (ie, 2, 5, 10, and 15). Comparison of spectral acceleration distributions of the selected ground motion suites demonstrates that the use of a scaling limit of 2 yields a relatively poor representation of the target spectra, because of the small limit leading to an insufficient number of available ground motions. It is also shown that increasing scaling limit results in selected ground motions with generally increased distributions of Arias intensity and significant duration Ds5-75, implying that scaling limit consideration can significantly influence the cumulative and duration characteristics of selected ground motions. The ground motion suites selected are then used as input for slope displacement and structural dynamic analyses. Comparative results demonstrate that the consideration of scaling limits in ground motion selection has a notable influence on the distribution of the engineering demand parameters calculated (ie, slope displacement and interstory drift ratio). Finally, based on extensive analyses, a scaling limit range of 3 to 5 is recommended for general use when selecting ground motion records from the NGA-West2 database.  相似文献   

3.
A generalized conditional intensity measure (GCIM) approach is proposed for use in the holistic selection of ground motions for any form of seismic response analysis. The essence of the method is the construction of the multivariate distribution of any set of ground‐motion intensity measures conditioned on the occurrence of a specific ground‐motion intensity measure (commonly obtained from probabilistic seismic hazard analysis). The approach therefore allows any number of ground‐motion intensity measures identified as important in a particular seismic response problem to be considered. A holistic method of ground‐motion selection is also proposed based on the statistical comparison, for each intensity measure, of the empirical distribution of the ground‐motion suite with the ‘target’ GCIM distribution. A simple procedure to estimate the magnitude of potential bias in the results of seismic response analyses when the ground‐motion suite does not conform to the GCIM distribution is also demonstrated. The combination of these three features of the approach make it entirely holistic in that: any level of complexity in ground‐motion selection for any seismic response analysis can be exercised; users explicitly understand the simplifications made in the selected suite of ground motions; and an approximate estimate of any bias associated with such simplifications is obtained. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

4.
This short communication introduces a quantitative approach for the engineering validation of ground‐motion simulations based on information theory concepts and statistical hypothesis testing. Specifically, we use the Kullback‐Leibler divergence to measure the similarity of the probability distributions of recorded and simulated ground‐motion intensity measures (IMs). We demonstrate the application of the proposed validation approach to ground‐motion simulations computed by using a variety of methods, including Graves and Pitarka hybrid broadband, the deterministic composite source model, and a stochastic white noise finite‐fault model. Ground‐motion IMs, acting as proxies for the (nonlinear) seismic response of more complex engineered systems, are considered herein to validate the considered ground‐motion simulation methods. The list of considered IMs includes both spectral‐shape and duration‐related proxies, shown to be the optimal IMs in several probabilistic seismic demand models of different structural types, within the framework of performance‐based earthquake engineering. The proposed validation exercise (1) can highlight the similarities and differences between simulated and recorded ground motions for a given simulation method and/or (2) allow the ranking of the performance of alternative simulation methods. The similarities between records and simulations should provide confidence in using the simulation method for engineering applications, while the discrepancies should help in improving the tested method for the generation of synthetic records.  相似文献   

5.
In this paper the effect of causal parameter bounds (e.g. magnitude, source‐to‐site distance, and site condition) on ground motion selection, based on probabilistic seismic hazard analysis (PSHA) results, is investigated. Despite the prevalent application of causal parameter bounds in ground motion selection, present literature on the topic is cast in the context of a scenario earthquake of interest, and thus specific bounds for use in ground motion selection based on PSHA, and the implications of such bounds, is yet to be examined. Thirty‐six PSHA cases, which cover a wide range of causal rupture deaggregation distributions and site conditions, are considered to empirically investigate the effects of various causal parameter bounds on the characteristics of selected ground motions based on the generalized conditional intensity measure (GCIM) approach. It is demonstrated that the application of relatively ‘wide’ bounds on causal parameters effectively removes ground motions with drastically different characteristics with respect to the target seismic hazard and results in an improved representation of the target causal parameters. In contrast, the use of excessively ‘narrow’ bounds can lead to ground motion ensembles with a poor representation of the target intensity measure distributions, typically as a result of an insufficient number of prospective ground motions. Quantitative criteria for specifying bounds for general PSHA cases are provided, which are expected to be sufficient in the majority of problems encountered in ground motion selection for seismic demand analyses. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

6.
This paper focuses on the effects of long‐period pulse of near‐fault ground motions on the structural damage potential. Two sets of near‐fault ground motion records from Chi‐Chi, Taiwan earthquake and Northridge earthquake with and without distinct pulse are selected as the input, and the correlation analysis between 30 non‐structure‐specific intensity measure parameters and maximum inelastic displacements and energy responses (input energy and hysteretic energy) of bilinear single degree of freedom systems are conducted. Based on the frequency characteristic of near‐fault ground motions with remarkable long‐period components, two intensity indices are proposed, namely, the improved effective peak acceleration (IEPA) and improved effective peak velocity (IEPV). In addition a new characteristic period of these ground motions is defined based on IEPA and IEPV. Numerical results illustrate that the intensity measure parameters related to ground acceleration present the best correlation with the seismic responses for rigid systems; the velocity‐related and displacement‐related parameters are better for medium‐frequency systems and flexible systems, respectively. The correlation curves of near‐fault ground motions with velocity pulse differ from those of ground motions without pulse. Moreover, the improved parameters IEPA and IEPV of near‐fault impulsive ground motions enhance the performance of intensity measure of corresponding conventional parameters, i.e. EPA and EPV. The new characteristic period based on IEPA and IEPV can better reflect the frequency content of near‐fault ground motions. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

7.
An algorithm is presented for the selection of ground motions for use in seismic response analysis. The algorithm is based on the use of random realizations from the conditional multivariate distribution of ground motion intensity measures, IM|IMj, obtained from the generalized conditional intensity measure (GCIM) approach. The algorithm can be applied to the selection of both as-recorded amplitude-scaled and synthetic/simulated ground motions. A key feature is that the generality of the GCIM methodology allows for ground motion selection based on only explicit measures of the ground motions themselves, as represented by the various IM’s considered, rather than implicit causal parameters (e.g., source magnitude, source-to-site distance) which are presently used in other contemporary ground motion selection procedures. Several examples are used to illustrate the salient features of the algorithm, including: the effect of intensity measures considered; and the properties of ground motions selected for multiple exceedance probabilities. The flexibility of the proposed algorithm coupled with the GCIM methodology allows for objective and consistent ground motion selection as a natural extension of seismic hazard analysis.  相似文献   

8.
  相似文献   

9.
A stochastic ground‐motion simulation and modification technique is developed to generate energy‐compatible and spectrum‐compatible (ECSC) synthetic motions through wavelet packet characterization and modification in both frequency and time domains. The ECSC method significantly advances traditional spectral matching approaches, because it generates ground motions that not only match the target spectral accelerations, but also match Arias intensity build‐up and significant durations. The great similarity between the ECSC simulated motions and the actual recorded motions is demonstrated through one‐to‐one comparison of a variety of intensity measures. Extensive numerical simulations were also performed to validate the performance of the ECSC ground motions through nonlinear analyses of elasto‐plastic oscillators. The ECSC method can be easily implemented in the generalized conditional intensity measure framework by directly simulating a set of motions following a targeted distribution of multiple intensity measures. Therefore, the ECSC method has great potential to be used in performance‐based earthquake design and analysis. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

10.
In this study, the broadband ground motions of the 2021 M7.4 Maduo earthquake were simulated to overcome the scarcity of ground motion recordings and the low resolution of macroseismic intensity map in sparsely populated high-altitude regions. The simulation was conducted with a hybrid methodology, combining a stochastic high-frequency simulation with a low-frequency ground motion simulation, from the regional 1-D velocity structure model and the Wang WM et al.(2022) source rupture model,respect...  相似文献   

11.
Response spectrum matching is commonly used to generate ground motions with response spectra matching a scenario target spectrum. There is some debate in the literature about whether spectrum‐matched motions lead to biased structural analysis results. Furthermore, there are no objective, quantitative criteria available for deciding whether a ground motion has been manipulated excessively by spectrum matching, and whether large modification may also lead to bias. This study investigates both of these issues by presenting the results of structural analysis using two reinforced concrete moment frame models and two earthquake scenarios, with suites of unmatched and matched ground motions. Through comparison with a robust benchmark, it is shown that no significant bias is introduced by spectrum matching. The period range and target damping values for matching are also investigated, and matching up to three times the fundamental period is shown to be beneficial in reducing dispersion in the results. Finally, these analyses were also used to investigate whether large changes in the ground motion lead to biased analysis results. Several potential measures of change are investigated, including those based on peak absolute ground motion, cumulative squared ground motion (absolute or normalized), and input energy into single‐degree‐of‐freedom systems. Although no systematic, statistically significant correlation is found for the analysis results in terms of any of these measures of change, tentative criteria are proposed, which may be used by analysts to aid in the decision of whether to accept or reject a spectrum‐matched motion. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

12.
A method for generating a suite of synthetic ground motion time‐histories for specified earthquake and site characteristics defining a design scenario is presented. The method employs a parameterized stochastic model that is based on a modulated, filtered white‐noise process. The model parameters characterize the evolving intensity, predominant frequency, and bandwidth of the acceleration time‐history, and can be identified by matching the statistics of the model to the statistics of a target‐recorded accelerogram. Sample ‘observations’ of the parameters are obtained by fitting the model to a subset of the NGA database for far‐field strong ground motion records on firm ground. Using this sample, predictive equations are developed for the model parameters in terms of the faulting mechanism, earthquake magnitude, source‐to‐site distance, and the site shear‐wave velocity. For any specified set of these earthquake and site characteristics, sets of the model parameters are generated, which are in turn used in the stochastic model to generate the ensemble of synthetic ground motions. The resulting synthetic acceleration as well as corresponding velocity and displacement time‐histories capture the main features of real earthquake ground motions, including the intensity, duration, spectral content, and peak values. Furthermore, the statistics of their resulting elastic response spectra closely agree with both the median and the variability of response spectra of recorded ground motions, as reflected in the existing prediction equations based on the NGA database. The proposed method can be used in seismic design and analysis in conjunction with or instead of recorded ground motions. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

13.
汶川地震烈度分布与震源过程相关性的初步研究   总被引：8，自引：1，他引：7  
汶川地震造成了靠近发震断层附近地区的工程结构的严重破坏,由此导致了巨大的人员伤亡和财产损失。汶川地震后,虽然目前还没有得到完整的强震记录,但是作为震害宏观描述的地震烈度,在一定程度上反应了汶川地震近断层地震动与震源过程之间的相关性,如近断层地震动的方向性效应和上盘效应。本文对此做了一些定性的分析,认为高烈度区的分布与震源机制和破裂过程存在一定的相关性,并且在近断层地区很可能存在着较为显著的方向性效应和上盘效应。更详细的研究还需要在得到足够的强震记录后才能进行。  相似文献   

14.
Spectral shape,epsilon and record selection   总被引：4，自引：0，他引：4  
Selection of earthquake ground motions is considered with the goal of accurately estimating the response of a structure at a specified ground motion intensity, as measured by spectral acceleration at the first‐mode period of the structure, Sa(T1). Consideration is given to the magnitude, distance and epsilon (ε) values of ground motions. First, it is seen that selecting records based on their ε values is more effective than selecting records based on magnitude and distance. Second, a method is discussed for finding the conditional response spectrum of a ground motion, given a level of Sa(T1) and its associated mean (disaggregation‐based) causal magnitude, distance and ε value. Records can then be selected to match the mean of this target spectrum, and the same benefits are achieved as when records are selected based on ε. This mean target spectrum differs from a Uniform Hazard Spectrum, and it is argued that this new spectrum is a more appropriate target for record selection. When properly selecting records based on either spectral shape or ε, the reductions in bias and variance of resulting structural response estimates are comparable to the reductions achieved by using a vector‐valued measure of earthquake intensity. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

15.
The scarcity of strong ground motion records presents a challenge for making reliable performance assessments of tall buildings whose seismic design is controlled by large‐magnitude and close‐distance earthquakes. This challenge can be addressed using broadband ground‐motion simulation methods to generate records with site‐specific characteristics of large‐magnitude events. In this paper, simulated site‐specific earthquake seismograms, developed through a related project that was organized through the Southern California Earthquake Center (SCEC) Ground Motion Simulation Validation (GMSV) Technical Activity Group, are used for nonlinear response history analyses of two archetype tall buildings for sites in San Francisco, Los Angeles, and San Bernardino. The SCEC GMSV team created the seismograms using the Broadband Platform (BBP) simulations for five site‐specific earthquake scenarios. The two buildings are evaluated using nonlinear dynamic analyses under comparable record suites selected from the simulated BBP catalog and recorded motions from the NGA‐West database. The collapse risks and structural response demands (maximum story drift ratio, peak floor acceleration, and maximum story shear) under the BBP and NGA suites are compared. In general, this study finds that use of the BBP simulations resolves concerns about estimation biases in structural response analysis which are caused by ground motion scaling, unrealistic spectral shapes, and overconservative spectral variations. While there are remaining concerns that strong coherence in some kinematic fault rupture models may lead to an overestimation of velocity pulse effects in the BBP simulations, the simulations are shown to generally yield realistic pulse‐like features of near‐fault ground motion records.  相似文献   

16.
This paper considers the dynamical behaviour of a structural model with foundation uplift. The equations of motion of the system considered are derived for large displacements thus allowing for the eventual overturning of the system. The transition conditions between successive phases of motion, derived in terms of the specific Lagrangian co‐ordinates used in the formulation of the equations of motion, present innovative aspects which resolve some previously inexplicable behaviour in the structural response reported in the literature. The dynamical behaviour of the model is considered under impulsive and long‐duration ground motions. The minimum horizontal acceleration impulses for the uplift and the overturning of the system are evaluated in analytical form. The sensitivity of the model to uplifting and to overturning under impulsive excitations is established as a function of few significant structural parameters. Numerical applications have been performed changing either the structural parameters or the loading parameter, in order to analyse several dynamical behaviours and also to validate the analytical results. For earthquake ground motions the results, reported in the form of response spectra, show that linearized models generally underestimate, sometimes significantly, the structural response. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

17.
A parameterized stochastic model of near‐fault ground motion in two orthogonal horizontal directions is developed. The major characteristics of recorded near‐fault ground motions are represented. These include near‐fault effects of directivity and fling step; temporal and spectral non‐stationarity; intensity, duration, and frequency content characteristics; directionality of components; and the natural variability of ground motions. Not all near‐fault ground motions contain a forward directivity pulse, even when the conditions for such a pulse are favorable. The proposed model accounts for both pulse‐like and non‐pulse‐like cases. The model is fitted to recorded near‐fault ground motions by matching important characteristics, thus generating an ‘observed’ set of model parameters for different earthquake source and site characteristics. A method to generate and post‐process synthetic motions for specified model parameters is also presented. Synthetic ground motion time series are generated using fitted parameter values. They are compared with corresponding recorded motions to validate the proposed model and simulation procedure. The use of synthetic motions in addition to or in place of recorded motions is desirable in performance‐based earthquake engineering applications, particularly when recorded motions are scarce or when they are unavailable for a specified design scenario. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

18.
This paper presents an analytical study evaluating the influence of ground motion duration on structural damage of 3‐story, 9‐story, and 20‐story SAC steel moment resisting frame buildings designed for downtown Seattle, WA, USA, using pre‐Northridge codes. Two‐dimensional nonlinear finite element models of the buildings are used to estimate the damage induced by the ground motions. A set of 44 ground motions is used to study the combined effect of spectral acceleration and ground motion significant duration on drift and damage measures. In addition, 10 spectrally equivalent short‐duration shallow crustal ground motions and long‐duration subduction zone records are selected to isolate duration effect and assess its effect on the response. For each ground motion pair, incremental dynamic analyses are performed at at least 20 intensity levels and response measures such as peak interstory drift ratio and energy dissipated are tracked. These response measures are combined into two damage metrics that account for the ductility and energy dissipation. Results indicate that the duration of the ground motion influences, above all, the combined damage measures, although some effect on drift‐based response measures is also observed for larger levels of drift. These results indicate that because the current assessment methodologies do not capture the effects of ground motion duration, both performance‐based and code‐based assessment methodologies should be revised to consider damage measures that are sensitive to duration. Copyright © 2016 John Wiley & Sons, Ltd  相似文献   

19.
Researchers and practitioners in earthquake engineering have recognized geographic information systems (GIS) to be a significant tool in modeling spatial phenomenon related to hazard and risk. GIS, as an engineering tool, has been primarily used for its spatial data storing and presentation features. Models are often simplified to be more compatible with the light computational capabilities of many GIS. If not simplified, heavy computations are generally performed external to the GIS. A prototype vector-based GIS was developed that employs a rigorous approach to Newmark's displacement method for assessing earthquake triggered landslide hazards. The rigorous Newmark's analysis provides desirable flexibility by allowing input of actual ground motions. The prototype hazard GIS incorporates a popular shot filtered noise technique for generating artificial ground motions. The rigorous approach was compared to a popular simplified approach for computing Newmark displacements. Distribution of regional displacements was found to be similar with the simplified approach giving more and larger extreme displacements. The rigorous approach is suitable for large scales to model various seismic scenarios and their effect on seismically induced landslide potential.  相似文献   

20.
关于地震烈度物理标准研究的若干思考   总被引：17，自引：0，他引：17       下载免费PDF全文
郝敏  谢礼立  徐龙军 《地震学报》2005,27(2):230-234
自从现代地震学形成以来， 人们一直沿用地震烈度来度量地震的破坏后果和破坏程度， 地震工程师也致力于给地震烈度赋以恰当的物理量， 一方面旨在解释地震的破坏作用， 同时也希望能用这个物理量来代表地震对结构的一种输入荷载， 以供工程抗震设计使用. 这就是研究ldquo;地震烈度物理标准rdquo;工作的任务. 但是由于不同结构的破坏机理很不相同， 甚至同一类结构由于层高、 使用的材料以及所在场地的差别， 即使在同一地震作用下， 其震害也会有很大的差异. 此外， 导致结构破坏的地震动因素也十分复杂， 绝不限于地震动峰值一个因素. 因此本文指出， 新的烈度标准应不仅能反映各种结构的具体特点， 还应在研究地震动幅值参数的同时进一步考虑与地震动能量有关的参数， 特别是针对不同结构应采用不同的地震动参数.   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号