首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
利用流体包裹体的分析测试技术与研究方法,对鄂尔多斯盆地中西部长8油层组的成藏期次进行了研究。烃类包裹
体及其伴生的盐水包裹体的岩相学特征、均一温度、盐度、密度及成分分析显示,长8储层主要发育两期烃类包裹体,第
一期分布在早期方解石胶结物、石英颗粒表面及其连生的石英加大边中以及未切穿石英颗粒的早期愈合裂缝中,其伴生盐
水包裹体的均一温度峰值为80~90℃;第二期烃类包裹体分布在石英颗粒表面和切穿石英颗粒的裂缝中,其伴生盐水包裹
体的均一温度峰值为100~120℃。储层成岩作用与油气充注微观分析、成岩-烃类充注演化时间序列研究,结合地层埋藏史
和热史分析表明,研究区经历了三期烃类充注事件：第一期（约169~161 Ma） 充注规模小,砂岩中未捕获到这一期适合进
行均一温度与成分测定的烃类包裹体,因此本研究缺乏这期包裹体的温度与成分数据;第二期（约148~135 Ma） 烃类充注
对应前述获得均一温度与成分数据的第一期烃类包裹体;第三期烃类充注规模最大,发生在早白垩世晚期的125.2~105.7 Ma
之间,为主成藏期,对应前述获得均一温度与成分数据的第二期烃类包裹体。  相似文献   

2.
Synthetic hydrocarbon and aqueous inclusions have been created in the laboratory batch reactors in order to mimic inclusion formation or re-equilibration in deeply buried reservoirs. Inclusions were synthesized in quartz and calcite using pure water and Mexican dead oil, or n-tetradecane (C14H30), at a temperature and pressure of 150 °C and 1 kbar. One-phase hydrocarbon inclusions are frequently observed at standard laboratory conditions leading to homogenization temperatures between 0 and 60 °C. UV epifluorescence of Mexican oil inclusions is not uniform; blue and green-yellow colored inclusions coexist; however, no clear evidence of variations in fluid chemistry were observed. Homogenization temperatures were recorded and the maxima of Th plotted on histograms are in good agreement with expected Th in a range of 6 °C. Broad histograms were reconstructed showing non-symmetrical Th distributions over a 20 °C temperature range centered on the expected Th. This histogram broadening is due to the fragility of the fluid inclusions that were created by re-filling of pre-existing microcavities. Such Th histograms are similar to Th histograms recorded on natural samples from deeply buried carbonate reservoirs. Th values lower than those expected were measured for hydrocarbon inclusions in quartz and calcite, and for aqueous inclusions in calcite. However, the results confirm the ability of fluid inclusions containing two immiscible fluids to lead to PT reconstructions, even in overpressured environments.  相似文献   

3.
Based on the results of fluid inclusion study (microscopic characteristics, homogenization temperatures and grains with oil inclusions), the pool-forming time of the Nanbaxian and Mabei 1 oilfields in northern Qaidam Basin was discussed in this paper. Fluid inclusions in northern Qaidam Basin are relatively abundant, including aqueous inclusions and hydrocarbon inclusions. These inclusions are small (5–10 μm), and mainly distributed in quartz fissures, overgrowths and cementations. The abundances of grains with oil inclusions (GOI) are commonly low. The GOI values of most samples are between 2.0%–10.5%, and those of about 40 percent of total samples exceed 5%. The homogenization temperatures of fluid inclusions in different samples are markedly dissimilar, indicating that these inclusions were formed in different periods. According to the measured homogenization temperatures of fluid inclusions and in combination with burial history and thermal evolution history, the Nanbaxian and Mabei 1 oilfields are deduced, which have experienced two hydrocarbon charging periods, with the former of N1-N2 1 and N2 2–N2 3, and the latter of N1 and N1 end −N2, respectively.  相似文献   

4.
The Proterozoic Athabasca basin and underlying basement host numerous unconformity-related uranium deposits that were formed from extensive fluid circulation near the basement-cover interface. Although it is generally agreed that the mineralizing fluids were basinal brines, it is still unclear what driving forces were responsible for the circulation of the basinal fluids. Because different fluid flow driving forces are associated with different thermal profiles, knowing the basin-scale distribution of paleo-fluid temperatures can help constrain the fluid flow mechanism. This study uses fluid inclusions entrapped in quartz overgrowths and authigenic illite in sandstones from three drill cores (WC-79-1, BL-08-01, and DV10-001) in the central part of the Athabasca basin as thermal indicators of paleo-fluids in the basin. A total of 342 fluid inclusions in quartz overgrowths were studied for microthermometry. The homogenization temperatures (Th) range from 50° to 235 °C, recording the minimum temperatures in various diagenetic stages. Temperatures estimated from illite geothermometry (121 points) range from 212° to 298 °C, which are systematically higher than (partly overlapping) the Th values, suggesting that illite was precipitated in hotter fluids following the formation of quartz overgrowths. Neither the fluid inclusion Th values nor the illite temperatures show systematic increase with depth in individual drill cores. This, together with the high illite temperatures that cannot be explained by burial at a normal geothermal gradient (35 °C/km), is interpreted to indicate that basin-scale fluid convection took place during the diagenetic history of the basin. Prolonged fluid convection is inferred to be responsible for delivering uranium (extracted from the basin or the upper part of the basement) to the unconformity, where uranium mineralization took place due to redox reactions associated with fluid-rock interaction or structurally controlled fluid mixing.  相似文献   

5.
Diagenesis of Upper Carboniferous foreland shelf rocks in southeastern Kansas took place at temperatures as high as 100–150° C at a depth of less than 2 km. High temperatures are the result of the long distance (hundreds of kilometers) advection of groundwater related to collisional orogeny in the Ouachita tectonic belt to the south. Orogenic activity in the Ouachita area was broadly Late Carboniferous, equivalent to the Variscan activity of Europe. Mississippi Valley-type Pb-Zn deposits and oil and gas fields in the US midcontinent and elsewhere are commonly attributed to regional groundwater flow resulting from such collisional events. This paper describes the diagenesis and thermal effects in sandstone and limestone of Upper Carboniferous siliciclastic and limestone-shale cyclothems, the purported confining layer of a supposed regional aquifer. Diagenesis took place in early, intermediate, and late stages. Many intermediate and late stage events in the sandstones have equivalents in the limestones, suggesting that the causes were regional. The sandstone paragenesis includes siderite cement (early stage), quartz overgrowths (intermediate stage), dissolution of feldspar and carbonates, followed by minor Fe calcite, pore-filling kaolinite and sub-poikilotopic Ca ankerite (late stage). The limestone paragenesis includes calcite cement (early stage); megaquartz, chalcedony, and Fe calcite spar (intermediate stage); and dissolution, Ca-Fe dolomite and kaolinite (late stage). The R m value of vitrinite shows a regional average of 0.6–0.7%; Rock-Eval T maX suggests a comparable degree of organic maturity. The T h of aqueous fluid inclusions in late stage Ca-Fe-Mg carbonates ranges from 90 to 160° and T mice indicates very saline water (>200000 ppm NaCl equivalent); 18O suggests that the water is of basinal origin. Local warm spots have higher R m, T max, and T h. The results constrain numerical models of regional fluid migration, which is widely viewed as an artesian flow from recharge areas in the Ouachita belt across the foreland basin onto the foreland shelf area. Such models must account for heating effects that extend at least 500 km from the orogenic front and affect both supposed aquifer beds and the overlying supposed confining layer. Warm spots indicate either more rapid or more prolonged flow locally. T h and T mice data show the highest temperatures coincided with high salinity fluids.  相似文献   

6.
The Talate Pb-Zn deposit,located in the east of the NW-SE extending Devonian Kelan volcanic-sedimentary basin of the southern Altaides,occurs in the metamorphic rock series of the upper second lithological section of the lower Devonian lower Kangbutiebao Formation(D_1k_1~2).The Pb-Zn orebodies are stratiform and overprinted by late sulfide—quartz veins.Two distinct mineralization periods were identified:a submarine volcanic sedimentary exhalation period and a metamorphic hydrothermal mineralization period.The metamorphic overprinting period can be further divided into two stages:an early stage characterized by bedding-parallel lentoid quartz veins developed in the chlorite schist and leptite of the ore-bearing horizon,and a late stage represented by pyritechalcopyrite-quartz veins crosscutting chlorite schist and leptite or the massive Pb-Zn ores.Fluid inclusions in the early metamorphic quartz veins are mainly CO_2-H_2O-NaCI and carbonic(CO_2±CH_4±N_2) inclusions with minor aqueous inclusions.The CO_2-H_2O-NaCl inclusions have homogenization temperatures of 294-368℃,T_(m,CO2) of-62.6 to-60.5℃,T_(h,CO2) of 7.7 to 29.6℃(homogenized into liquid),and salinities of 5.5-7.4 wt%NaCl eqv.The carbonic inclusions have T_(m,CO2)of-60.1 to-58.5℃,and T_(h,Co2) of-4.2 to 20.6℃.Fluid inclusions in late sulfide quartz veins are also dominated by CO_2-H_2O-NaCl and CO_2±CH_4 inclusions.The CO_2-H_2O-NaCl inclusions have T_(b,tot) of142 to 360℃,T_(m,CO2)of-66.0 to-56.6℃,T_(h,CO2) of-6.0 to 29.4℃(homogenized into liquid) and salinities of 2.4-16.5 wt%NaCl eqv.The carbonic inclusions have T_(m,Co2)of-61.5 to-57.3℃,and T_(h,CO2) of-27.0to 28.7℃.The aqueous inclusions(L-V) have T_(m,ice) of-9.8 to-1.3℃ and T_(h,tot) of 205 to 412℃.The P-T trapping conditions of CO_2-rich fluid inclusions(100-370 MPa,250-368℃) are comparable with the late- to post-regional metamorphism conditions.The CO_2-rich fluids,possibly derived from regional metamorphism,were involved in the reworking and metal enrichment of the primary ores.Based on these results,the Talate Pb-Zn deposit is classified as a VMS deposit modified by metamorphic fluids.The massive Pb-Zn ores with banded and breccia structures were developed in the early period of submarine volcanic sedimentary exhalation associated with an extensional subduction-related back-arc basin,and the quartz veins bearing polymetallic sulfides were formed in the late period of metamorphic hydrothermal superimposition related to the Permian-Triassic continental collision.  相似文献   

7.
Medium to coarse-grained Neo-Proterozoic Nagthat siliciclastic rocks form a part of the Krol Formation in the Lesser Himalayan geotectonic zone. Fluid inclusion and geochemical studies have been carried out on the Nagthat siliciclastics from the Tons valley to determine their provenance during the Proterozoic and their recrystallisation during maximum burial to uplift. Fluid inclusion studies have been carried out on detrital, recrystallised quartz grains and quartz overgrowths. Major and trace element analyses of the siliciclastics, the relationships of SiO2 with various trace elements, and the association of various trace elements with mineral species suggest a granitic source for these siliciclastics. Primary Q1 aqueous brine inclusions and Q3 H2O–CO2 fluid with 0.9 gm/cm3 CO2 density in detrital quartz grains characterised the protolith of the sandstone as granite or metamorphic rocks. H2O–NaCl fluids participated in the cementation history, temperatures of quartz overgrowth from 198 to 232 °C show the effect of maximum burial. The re-equilibration of the primary fluid due to elevated internal pressure > confining pressure is evident from features like ‘C’ shaped cavities, stretching of the inclusions, their migration, decrepitation clusters, etc. During recrystallisation these inclusions were equilibrated at 187 ° and 235 °C in a restricted fluid of aqueous, moderately saline composition. The observed inclusion morphology is attributed to a decrease in external pressure related to isothermal decompression uplift.  相似文献   

8.
Geochemical analysis of bitumen- and hydrocarbon-bearing fluid inclusions from the Devonian-Carboniferous Clair field indicates that the reservoirs contain a mixture of oils from different marine and lacustrine sources. Reconstruction of the Clair field oil-charge history using fluid inclusion petrography show that oil-charging occurred at times of K-feldspar, quartz and calcite cementation. Temperature–composition–time data yielded from the integration of fluid inclusion microthermometry with high-resolution Ar–Ar dating, date hydrocarbon-bearing K-feldspar overgrowths at 247 ± 3.3 Ma. These data show that in order for oil to be trapped within primary fluid inclusions in K-feldspar overgrowths, hydrocarbon migration throughout the UK Atlantic margin must have been taking place during the Late Palaeozoic and as such, current industry oil-play models based solely on oil charging from Jurassic-Cretaceous marine sources are clearly incomplete and need revision. Apatite fission track analysis and vitrinite reflectance data were used to reconstruct thermal burial histories and assess potential oil generation from Middle Devonian lacustrine source rocks. Thermal history data from wells along The Rona Ridge adjacent to the Clair field show that the Palaeozoic section was heated to greater than 100 °C at some time between 270 and 230 Ma, confirming that Devonian source rocks were mature and expelling oil during the Late Palaeozoic at the time that authigenic K-feldspar overgrowths were growing in the Clair field.  相似文献   

9.
<正>The Kuqa foreland basin is an important petroliferous basin where gas predominates.The Kela-2 large natural gas reservoir and the Yinan-2,Dabei-1,Tuzi and Dina-11 gas reservoirs have been discovered in the basin up to the present.Natural gases in the Kelasu district and the Yinan district are generated from different source rocks indicated by methane and ethane carbon isotopes.The former is derived from both Jurassic and Triassic source rocks,while the latter is mainly from the Jurassic. Based on its multistage evolution and superposition and the intense tectonic transformation in the basin,the hydrocarbon charging history can be divided into the early and middle Himalayan hydrocarbon accumulation and the late Himalayan redistribution and re-enrichment.The heavier carbon isotope composition and the high natural gas ratio of C_1/C_(1-4) indicate that the accumulated natural gas in the early Himalayan stage is destroyed and the present trapped natural gas was charged mainly in the middle and late Himalayan stages.Comparison and contrast of the oils produced in the Kelasu and Yinan regions indicate the hydrocarbon charging histories in the above two regions are complex and should be characterized by multistage hydrocarbon migration and accumulation.  相似文献   

10.
The Xiaojiashan tungsten deposit is located about 200 km northwest of Hami City, the Eastern Tianshan orogenic belt, Xinjiang, northwestern China, and is a quartz vein‐type tungsten deposit. Combined fluid inclusion microthermometry, host rock geochemistry, and H–O isotopic compositions are used to constrain the ore genesis and tectonic setting of the Xiaojiashan tungsten deposit. The orebodies occur in granite intrusions adjacent to the metamorphic crystal tuff, which consists of the second lithological section of the first Sub‐Formation of the Dananhu Formation (D2d 12). Biotite granite is the most widely distributed intrusive bodies in the Xiaojiashan tungsten deposit. Altered diorite and metamorphic crystal tuff are the main surrounding rocks. The granite belongs to peraluminous A‐type granite with high potassic calc‐alkaline series, and all rocks show light Rare Earth Element (REE)‐enriched patterns. The trace element characters suggest that crystallization differentiation might even occur in the diagenetic process. The granite belongs to postcollisional extension granite, and the rocks formed in an extensional tectonic environment, which might result from magma activity in such an extensional tectonic environment. Tungsten‐bearing quartz veins are divided into gray quartz vein and white quartz veins. Based on petrography observation, fluid inclusions in both kinds of vein quartz are mainly aqueous inclusions. Microthermometry shows that gray quartz veins have 143–354°C of Th, and white quartz veins have 154–312°C of Th. The laser‐Raman test shows that CO2 is found in fluid inclusions of the tungsten‐bearing quartz veins. Quadrupole mass spectrometry reveals that fluid inclusions contain major vapor‐phase contents of CO2, H2O. Meanwhile, fluid inclusions contain major liquid‐phase contents of Cl?, Na+. It can be speculated that the ore‐forming fluid of the Xiaojiashan tungsten deposit is characterized by an H2O–CO2, low salinity, and H2O–CO2–NaCl system. The range of hydrogen and oxygen isotope compositions indicated that the ore‐forming fluids of the tungsten deposit were mainly magmatic water. The ore‐forming age of the Xiaojiashan deposit should to be ~227 Ma. During the ore‐forming process, the magmatic water had separated from magmatic intrusions, and the ore‐bearing complex was taken to a portion where tungsten‐bearing ores could be mineralized. The magmatic fluid was mixed by meteoric water in the late stage.  相似文献   

11.
Organic inclusions from the Shahejie Formation of the Eogene period in the Bohai Gulf Basin,eastern China,were examined using micro-FT.IR and fluorescence microscopy in addition to the measurement of their homogenization temperatures(Th).Two populations of organic inclusions were recognized,the primary and the secondary organic inclusions.The primary organic inclusions contain organic materials with relatively long alkyl chains(the carbon atom number is 15 to 17),whereas the secondary organic inclusions contain a certain amount of H2S besides organic materials which have relatively short alkyl chains with the carbon atom number of 5 to 6.The Th values of the primary organic inclusions within the rage of 87-91℃,lower than those of the secondary organic inclusions(Th=98-105℃）,sugesting that the primary organic inclusions experienced a lower degree of thermal evolution than the secondary inclusions.This inference is consistent with the fluorescence spectroscopic characteristics and parameters(Tmax,Q values)of the organic inclusions.Data from the organic inclusions together with the petroleum geology setting revealed that the primary inclusions resulted from the migration of hydrocarbons generated within the strata they are hosted,whereas the secondary organic inclusions were trapped in the process of secondary hydrocarbons expelled out of the source rocks to the locations where they were accumulated.The thermal properties of the organic inclusions are consistent with the maturation of the oil generated from the Shahejie Formation.The abundance of the organic inclusions and their characteristics indicate that the member Es3 of the Shaheije Formation is highly potential for oil accumulation.The results could provide essential coues to petroleum exploration in the Bohai Gulf Basic.  相似文献   

12.
Vein-type, structurally controlled Cu–Au mineralisation hosted by turbidites of late Silurian to earliest Devonian age, forms an important resource close to the eastern margin of the Cobar Basin. Here we report 103 new sulfur isotope analyses, together with homogenisation temperatures and salinity data for 545 primary two-phase fluid inclusions for the mineralised zones from the central area of the Cobar mining district. A range in δ34S values from 3.8 to 11.2‰ (average 7.9‰) is present. Sulfur is likely to have been derived from rock sulfur/sulfide in basin and basement rocks, but there may be an additional connate-derived component. Homogenisation temperatures (Th) for inclusion fluids trapped in quartz and minor calcite veins range from near 150°C to 397°C. Fluid inclusions are characterised by a low CO2 content and low, but variable salinities (2.1–9.1 wt% NaCl equivalent). Generations of inclusion fluids correspond to six paragenetic stages of vein quartz deposition and recrystallisation at the Chesney mine. Primary fluid inclusions in the first two stages were subjected to re-equilibration resulting from increased confining pressure. Their Th range (151–317°C) is considered a minimum for the temperature of these fluids. Sulfide and gold deposition at Chesney appears to be related to fluids of moderately high Th (range 270–397°C) associated with the final paragenetic stage. Th for the ore-related fluids may be close to the solvus of the H2O–NaCl–CO2 system and hence near trapping temperatures. Late-stage entry of a hot, moderately saline ore-forming fluid is implicated as the origin of the Cu–Au mineralisation. However, comparison with geochemical data for the vein-style Zn–Pb–Ag deposits at Cobar demonstrates that differences in metal content for individual zones cannot be attributed to major differences in fluid temperature or salinity. Rather, these differences are probably due to variations in source-rock reservoirs and structural pathways along which the ore-forming fluids moved.  相似文献   

13.
The Wulasigou Cu-Pb-Zn deposit,located 15 km northwest of Altay city in Xinjiang,is one of many Cu-Pb-Zn polymetallic deposits in the Devonian Kelan volcanic-sedimentary basin in southern Altaids.Two mineralizing periods can be distinguished:the marine volcanic sedimentary PbZn mineralization period,and the metamorphic hydrothermal Cu mineralization period,which is further divided into an early bedded foliated quartz vein stage(Q1) and a late sulfide-quartz vein stage(Q2) crosscutting the foliation.Four types of fluid inclusions were recognized in the Q1 and Q2 quartz from the east orebodies of the Wulasigou deposit:H_2O-CO_2 inclusions,carbonic fluid inclusions,aqueous fluid inclusions,and daughter mineral-bearing fluid inclusions.Microthermometric studies show that solid CO_2 melting temperatures(T_(m,CO2)) of H_2O-CO_2 inclusions in Ql are from-62.3℃ to-58.5C,clathrate melting temperatures(T_(m,clath)l) are from 0.5 C to 7.5 C,partial homogenization temperatures(T_(h,CO2)) vary from 3.3℃ to 25.9℃(to liquid),and the total homogenization temperatures(T_(h,tot)) vary from 285℃ to 378℃,with the salinities being 4.9%-15.1%NaCl eqv.and the CO_2-phase densities being 0.50-0.86 g/cm~3.H_2O-CO_2 inclusions in Q2 have T_(m,CO_2) from-61.9℃ to-56.9℃,T_(m,clath)from 1.3℃ to 9.5℃,T_(h,CO2) from 3.4℃ to 28.7℃(to liquid),and T_(h,tot) from 242℃ to 388℃,with the salinities being 1.0%-15.5%NaCl eqv.and the CO_2-phase densities being 0.48-0.89 g/cm~3.The minimum trapping pressures of fluid inclusions in Q1 and Q2 are estimated to be 260-360 MPa and180-370 MPa,respectively.The δ~(34)S values of pyrite from the volcanic sedimentary period vary from2.3‰ to 2.8‰(CDT),and those from the sulfide-quartz veins fall in a narrow range of-1.9‰ to 2.6‰(CDT).The δD values of fluid inclusions in Q2 range from-121.0‰ to-100.8‰(SMOW),and theδ~(18)O_(H2O) values calculated from δ~(18)O of quartz range from-0.2‰ to 8.3‰(SMOW).The δD-δ~(18)O_(H2O)data are close to the magmatic and metamorphic fields.The fluid inclusion and stable isotope data documented in this study indicate that the vein-type copper mineralization in the Wulasigou Pb-Zn-Cu deposit took place in an orogenic-metamorphic enviroment.  相似文献   

14.
对长岭凹陷深层天然气藏储层——营城组火山岩中发育的流体包裹体进行了详细研究,结果表明在火山岩发育的石英、方解石细网脉中均存在较多的碳质流体包裹体,单个包裹体激光拉曼光谱分析结果表明其主要为CO2及CH4两种类型的碳质包裹体。其中方解石细网脉体中发育有原生及次生CH4包裹体,而含CO2包裹体多以原生包裹体产于石英细网脉中。很多含CO2包裹体的石英细脉中发现了含CH4包裹体的方解石脉体的角砾,这就表明石英细脉形成晚于方解石细脉。营城组火山岩储层中CO2及CH4包裹体的产状特征研究表明,松辽盆地深层天然气藏的形成系火山岩成岩后CO2及CH4等气体不同期次充注的结果,CH4气的充注时间早于CO2气,火山岩中发育的原生孔隙及次生裂隙为上述气体的充注和聚集提供了重要通道。  相似文献   

15.
综合油气地球化学、流体包裹体和构造演化资料,对塔里木盆地顺北地区奥陶系不同断裂带油气性质差异性、成藏期次及油气充注过程进行研究。地球化学分析表明,顺北地区不同断裂带油气物性和成熟度存在差异,由西向东从7号断裂带向1号断裂带原油密度变小,西部的7号带和5号带北段油气成熟度低,5号带南段和1号带油气成熟度高。包裹体分析结果表明,顺北地区奥陶系油气藏存在加里东晚期、海西晚期及喜马拉雅期多期油气充注过程。自西向东不同断裂带上主成藏期存在差异,西部的7号及5号断裂带油气成藏期为加里东晚期和海西晚期,东部的顺北1号断裂带多了一个晚期油气成藏即喜马拉雅期成藏。顺北地区多期油气充注成藏是导致该区油气成熟度变化的主要原因。研究区奥陶系成藏期古构造对断裂带的油气充注具有控制作用。加里东晚期,研究区走滑断裂带构造均处于充注有利区;海西晚期,顺北11号断裂带及其以西地区充注来自东部满加尔的油气概率较低。喜马拉雅期,仅顺北1号断裂带及其以东获得高熟油气充注。  相似文献   

16.
琼东南盆地崖城地区流体包裹体特征和油气充注期次分析   总被引：3，自引：0，他引：3  
储层流体包裹体研究是油气充注期次分析的重要手段。对琼东南盆地崖城地区下第三系崖城组和陵水组砂岩储层5口钻井岩芯样品进行包裹体镜下显微观察、荧光分析和伴生盐水包裹体均一温度测量,表明该区下第三系主要发生过两期油气充注:第一期充注油气主要发淡黄色荧光,以液态烃包裹体和气液两相烃包裹体为主,伴生盐水包裹体的均一温度主要分布在130~160℃,根据区域埋藏热演化史推断油气充注时间为晚中新世-早上新世。第二期充注油气主要发淡蓝色荧光,以气态烃包裹体、气液两相烃包裹体和气液固三相烃包裹体为主,伴生盐水溶液包裹体的均一温度范围为160~190℃,充注时间应为第四纪。  相似文献   

17.
本文以鄂尔多斯盆地西南缘镇泾地区延长组长8段致密砂岩储层为例,利用流体包裹体岩相学、微束荧光光谱及显微测温等分析方法, 厘定油气充注期次和时间,同时结合储层成岩演化,探讨储层致密化与油气成藏过程。研究表明,储层孔隙沥青呈黄色和蓝白色荧光, 并以蓝白色为主;石油包裹体呈黄色、黄绿色及蓝白色荧光,并以后两者居多。与黄色荧光石油包裹体同期的盐水包裹体均一温度主峰为 80℃～90℃; 而与黄绿色和蓝白色荧光石油包裹体同期的盐水包裹体均一温度主峰分别为105℃～115℃和110℃～120℃。研究区储层主要经历了3期烃类充注：第一期发生在早白垩世早期（138～130Ma）,表现为少量的低熟油充注;第二期发生在早白垩世晚期（124～105Ma）,为关键成藏期,与大规模成熟油充注相关; 第三期发生在晚白垩世（85～73Ma）,古油藏发生调整,再次成藏。储层早成岩阶段以机械压实、薄膜状绿泥石、高岭石及微晶方解石胶结为主,在中高孔渗条件下发生了早期石油充注;随着继续压实,石英加大、孔隙填充绿泥石、高岭石及亮晶方解石胶结发育,储层逐渐致密化 晚期石油在低渗致密储层内的运聚成藏主要受早期烃类充注路径控制。  相似文献   

18.
Three-phase NaCl-H2O fluid inclusions featuring halite dissolution temperature（Tm）higher than vapor bubble disappearance temperature（Th） are commonly observed in porphyry copper/molybdenum deposits,skarn-type deposits and other magmatic- hydrothermal ore deposits.Based on |ΔV1|（the absolute value of volume variation of NaCl-H2O solution in a heating or cooling process of inclusions）= |ΔVs|（the absolute value of volume variation of the halite crystal in a heating or cooling process of inclusions） and on the principle of conservation of the mass of NaCl and H2O,we systematically calculated the densities of NaCl-H2O solutions in the solid-liquid two-phase field for temperatures（Th） from 0.1℃ to 800℃ and salinities from 26.3 wt%to 99.2wt%.Consequently for the first time we obtained the upper limit of the density of NaCI-H2O solutions in the solid-liquid twophase field for Tbm inclusions with variant salinities.The results indicate that for inclusions of the Thm type with the same Th,the higher the Tm or salinity is,the higher the density of the NaClsaturated solution will be.If a group of fluid inclusions were homogeneously trapped,they must have the same Th value and the same Tm or salinity value.This may be used to distinguish homogeneous,inhomogeneous,and multiple entrapments of fluid inclusions.  相似文献   

19.
It is concluded that there are three hydrocarbon generation and accumulation processes in northeastern Sichuan on the basis of the characteristics of solid bitumen, gas-light oils-heavy oils, homogenization temperature of fluid inclusions and diagenesis for beach- and reef-facies dolomite gas- bearing reservoirs in the Puguang Gas Field, northeastern Sichuan Basin, southern China. The first hydrocarbon generation and accumulation episode occurred in the Indosinian movement （late Middle Triassic）. The sapropelic source rocks of the O3w （Upper Ordovician Wufeng Formation）-S1l （Lower Silurian Longmaxi Formation） were buried at depths of 2500 m to 3000 m with the paleogeothermal temperature ranging from 70℃ to 95℃, which yielded heavy oil with lower maturity. At the same time, intercrystalline pores, framework pores and corrosion caused by organic acid were formed within the organic reef facies of P2ch （Upper Permian Changxing Formation）. And the first stage of hydrocarbon reservoir occurred, the level of surface porosity of residual solid bitumen {solid bitumen/ （solid bitumen ＋ residual porosity）} was higher than 60%. The second episode occurred during the Middle Yanshanian movement （late Middle Jurassic）. During that period, the mixed organic source rocks were deposited in an intra-platform sag during the Permian and sapropelic source rocks of O3w-S1l experienced a peak stage of crude oil or light oil and gas generation because they were buried at depths of 3500 m to 6800 m with paleogeothermal temperatures of 96-168℃. At that time, the level of surface porosity of residual solid bitumen of the T1f shoal facies reservoirs was between 25% and 35%, and the homogenization temperatures of the first and second stages of fluid inclusions varied from 100℃ to 150℃. The third episode occurred during the Late Yanshanian （Late Cretaceous） to the Himalayan movement. The hydrocarbon reservoirs formed during the T1f and P2ch had the deepest burial of 7700 m to 8700 m and paleogeotemperatu  相似文献   

20.
The Campbell-Red Lake gold deposit in the Red Lake greenstone belt, with a total of approximately 840 t of gold (past production + reserves) and an average grade of 21 g/t Au, is one of the largest and richest Archean gold deposits in Canada. Gold mineralization is mainly associated with silicification and arsenopyrite that replace carbonate veins, breccias and wallrock selvages. The carbonate veins and breccias, which are composed of ankerite ± quartz and characterized by crustiform–cockade textures, were formed before and/or in the early stage of penetrative ductile deformation, whereas silicification, arsenopyrite replacement and gold mineralization were coeval with deformation. Microthermometry and laser Raman spectroscopy indicate that fluid inclusions in ankerite and associated quartz (Q1) and main ore-stage quartz (Q2) are predominantly carbonic, composed mainly of CO2, with minor CH4 and N2. Aqueous and aqueous–carbonic inclusions are extremely rare in both ankerite and quartz. H2O was not detected by laser Raman spectroscopic analyses of individual carbonic inclusions and by gas chromatographic analyses of bulk samples of ankerite and main ore-stage quartz (Q2). Fluid inclusions in post-mineralization quartz (Q3) are also mainly carbonic, but proportions of aqueous and aqueous–carbonic inclusions are present. Trace amounts of H2S were detected by laser Raman spectroscopy in some carbonic inclusions in Q2 and Q3, and by gas chromatographic analyses of bulk samples of ankerite and Q2. 3He/4He ratios of bulk fluid inclusions range from 0.008 to 0.016 Ra in samples of arsenopyrite and gold. Homogenization temperatures (T h–CO2) of carbonic inclusions are highly variable (from −4.1 to +30.4°C; mostly to liquid, some to vapor), but the spreads within individual fluid inclusion assemblages (FIAs) are relatively small (within 0.5 to 10.3°C). Carbonic inclusions occur both in FIAs with narrow T h–CO2 ranges and in those with relatively large T h–CO2 variations. The predominance of carbonic fluid inclusions has been previously reported in a few other gold deposits, and its significance for gold metallogeny has been debated. Some authors have proposed that formation of the carbonic fluid inclusions and their predominance is due to post-trapping leakage of water from aqueous–carbonic inclusions (H2O leakage model), whereas others have proposed that they reflect preferential trapping of the CO2-dominated vapor in an immiscible aqueous–carbonic mixture (fluid unmixing model), or represent an unusually H2O-poor, CO2-dominated fluid (single carbonic fluid model). Based on the FIA analysis reported in this study, we argue that although post-trapping modifications and host mineral deformation may have altered the fluid inclusions in varying degrees, these processes were not solely responsible for the formation of the carbonic inclusions. The single carbonic fluid model best explains the extreme rarity of aqueous inclusions but lacks the support of experimental data that might indicate the viability of significant transport of silica and gold in a carbonic fluid. In contrast, the weakness of the unmixing model is that it lacks unequivocal petrographic evidence of phase separation. If the unmixing model were to be applied, the fluid prior to unmixing would have to be much more enriched in carbonic species and poorer in water than in most orogenic gold deposits in order to explain the predominance of carbonic inclusions. The H2O-poor, CO2-dominated fluid may have been the product of high-grade metamorphism or early degassing of magmatic intrusions, or could have resulted from the accumulation of vapor produced by phase separation external to the site of mineralization.Geological Survey of Canada contribution 2004383.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号