共查询到20条相似文献，搜索用时 209 毫秒
1.
渗流-化学溶解耦合作用下岩石单裂隙渗透特性研究 总被引：3，自引：0，他引：3
为揭示在渗流-化学溶解耦合作用下单裂隙渗透特性的变化规律,建立了描述二维渗流-化学溶解耦合作用的偏微分方程组,并利用COMSOL Multiphysics软件成功地求解该方程组。首先,模拟了文献[1]中的盐岩渗流-溶解耦合渗流试验结果,数值模拟结果与试验结果较为吻合,验证了数学模型的正确性和有效性。然后,利用分形理论生成了一个粗糙的裂隙面数字模型,着重分析了二维石灰岩粗糙裂隙面在水流、矿物溶解和输运过程中其渗透特性的变化规律。数值分析显示,（1）溶质浓度对裂隙面的溶解具有非常重要的作用,从而水流进口端的溶解厚度比出口端大得多。（2）裂隙的整体渗透性在初始时刻增加较慢,随着裂隙开度的增大和贯通,溶解速度会逐渐增大,是一个加速的过程。 相似文献
2.
Transient changes in the permeability of fractures in systems driven far‐from‐equilibrium are described in terms of proxy roles of stress, temperature and chemistry. The combined effects of stress and temperature are accommodated in the response of asperity bridges where mineral mass is mobilized from the bridge to the surrounding fluid. Mass balance within the fluid accommodates mineral mass either removed from the flow system by precipitation or advection, or augmented by either dissolution or advection. Where the system is hydraulically closed and initially at equilibrium, reduction in aperture driven by the effects of applied stresses and temperatures will be augmented by precipitation on the fracture walls. Where the system is open, the initial drop in aperture may continue, and accelerate, where the influent fluid is oversaturated with respect to the equilibrium mineral concentration within the fluid, or may reverse, if undersaturated. This simple zero‐dimensional model is capable of representing the intricate behavior observed in experiments where the feasibility of fracture sealing concurrent with net dissolution is observed. This zero‐order model is developed as a constitutive model capable of representing key aspects of changes in the transport parameters of the continuum response of fractured media to changes in stress, temperature and chemistry. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
3.
Hide Yasuhara Naoki Kinoshita Hiroaki Ohfuji Dae Sung Lee Shinichiro Nakashima Kiyoshi Kishida 《Applied Geochemistry》2011,26(12):2074-2088
Examining the evolution of fracture permeability under stressed and temperature-elevated conditions, a series of flow-through experiments on a single rock fracture in granite has been conducted under confining pressures of 5 and 10 MPa, under differential water pressures ranging from 0.04 to 0.5 MPa, and at temperatures of 20–90 °C, for several hundred hours in each experiment. Measurements of fluid and dissolved mass fluxes, and post-experimental microscopy, were conducted to constrain the progress of mineral dissolution and/or precipitation and to examine its effect on transport properties. Generally, the fracture aperture monotonically decreased with time at room temperature, and reached a steady state in relatively short periods (i.e., <400 h). However, once the temperature was elevated to 90 °C, the aperture resumed decreasing and kept decreasing throughout the rest of the experimental periods. This reduction may result from the removal of the mineral mass from the bridging asperities within the fracture. Post-experimental observations by scanning electron microscopy, coupled with energy dispersive X-ray spectroscopy (SEM-EDX), revealed the formation of several kinds of secondary minerals such as silica and calcite. However, the precipitated minerals seemed to have had little influence on the flow characteristics within the fracture, because the precipitation was limited to quite local and small areas. The evolving rates and ultimate magnitudes of the fracture aperture are likely to be controlled by the stress exerted over the contacting asperities and temperatures, and by the prescribed flow conditions. Thus, this complex behavior should be attributed to the coupled chemically- and mechanically-induced effect. A coupled chemo–mechano conceptual model, accounting for pressure and free-face dissolutions, is presented in this paper to follow the evolution of the fracture permeability observed in the flow-through experiments. This model addresses the two dissolution processes at the contacting asperities and the free walls within the fractures, and is also capable of describing multi-mineral dissolution behavior. The model shows that the evolution of a fracture aperture (or related permeability) and of element concentrations may be followed with time under arbitrary temperature and pressure conditions. The model predictions for the evolving fracture aperture and elements concentrations show a relatively good agreement with the experimental measurements, although it is not possible to replicate the abrupt reduction observed in the early periods of the experiments, which is likely to be due to an unaccounted mechanism of more stress-mediated fracture compaction driven by the fracturing of the propping asperities. 相似文献
4.
构造-流体-成矿体系的反应-输运-力学耦合模型和动力学模拟 总被引：12，自引：0，他引：12
建立了一个综合的构造流体成矿体系的反应输运力学耦合动力学模型。利用有限元方法求解岩石变形、断裂作用和断裂网络统计动力学、流体流动、有机和无机地球化学反应及成岩成矿作用、压力溶液和其它压实力学、热迁移的方程组 ,可以对构造流体成矿体系的动力学演化过程进行 1～ 3维数值模拟。模拟的主要内容是在各种过程耦合作用下描述构造流体成矿体系的主要变量的时空演化 :( 1)与成矿流体的形成和性质有关的变量 ,如地层中矿物 (包括成矿物质 )的溶解速率、流体中各组分的浓度与饱和度、流体温度、压力、离子强度等 ;( 2 )与构造变形和流体运移有关的各变量 ,如应力与变形速率、岩石孔隙度、构造 (断裂 )渗透率等 ;( 3 )与沉淀成矿有关的变量 ,如矿物 (金属矿物和脉石矿物 )的成核速率、各矿物的沉淀量等 ;( 4 )上述各有关变量间的时空耦合关系 ,如断裂渗透率时空演化与流体流动、汇聚和成矿的耦合关系等。以湖南沃溪金锑钨矿床为例 ,应用该模型和方法对成矿动力学过程和动力学机制进行了初步的模拟与分析。 相似文献
5.
构造成矿非线性动力学:1.递增应力流变学模型 总被引：1，自引：1，他引：1
本文提出了构造成矿作用动力学研究的递增应力流变学方法。利用该方法将构造变形、应力、流体流动、地球化学反应及成岩成矿作用等多过程耦合起来，可以从多种地质过程的耦合与反馈作用对构造成矿的动力学演化过程进行１～３维数值模拟。模拟的主要内容是在各种过程耦合作用下，以下描述构造成矿体系的主要变量的时空演化：（１）与成矿流体的形成和性质有关的变量，如地层中矿物（包括成矿物质）的溶解速率、流体中各组分的浓度与饱和度、流体温度、压力、离子强度等；（２）与构造变形和流体运移有关的各变量，如应力与变形速率、岩石孔隙度、构造（断裂）渗透率等；（３）与沉淀成矿有关的变量，如矿物（金瞩矿物和脉石矿物）的成核速率、各矿物的沉淀量等；（４）上述各有关变量间的时空耦合关系，如断裂渗透率时空演化与流体流动、汇聚和成矿的耦合关系等。 相似文献
6.
碳酸盐岩单裂隙渗流-溶蚀耦合模型及其参数敏感性分析 总被引：1，自引：1，他引：0
岩溶地下水系统是由碳酸盐岩裂隙含水介质演化形成的,系统初始的裂隙网络介质特征及边界条件决定了其演化过程。为揭示岩溶系统演化过程中裂隙介质特征和边界条件的影响程度,建立了裂隙溶蚀扩展的渗流-溶蚀耦合模型,并对不同边界条件下不同隙宽的单裂隙溶蚀扩展特征进行了模拟分析。结果表明:裂隙溶蚀扩展受水的侵蚀性(CO2分压)、水动力条件(水力梯度)、裂隙介质特征(裂隙初始隙宽)等综合作用影响,Ca2+的平衡浓度、水力梯度以及裂隙初始隙宽等参数的增加均能促进裂隙的快速扩展。在这些参数中,初始隙宽B0对岩溶发育的影响最为敏感,水力梯度J和Ca2+平衡浓度Ceq对岩溶发育具有相同的敏感性;此外,随着各参数值的不断增大,参数变化对岩溶发育的敏感程度越来越低。 相似文献
7.
A numerical model is developed for investigating the evolution of fracture permeability in a coupled fracture-matrix system in the presence of fracture-skin with simultaneous colloidal and bacterial tr... 相似文献
8.
F. ROSSETTI F. TECCE L. ALDEGA M. BRILLI C. FACCENNA 《Journal of Metamorphic Geology》2006,24(1):33-53
Structural investigations, integrated with X‐ray diffraction, fluid inclusion microthermometry and oxygen‐stable isotope analyses are used to reconstruct the deformation history and the palaeo‐fluid circulation during formation of the low‐grade, turbidite‐dominated Early Palaeozoic Robertson Bay accretionary complex of north Victoria Land (Antarctica). Evidence for progressive deformation is elucidated by analysing the textural fabric of chronologically distinct, thrust‐related quartz vein generations, incrementally developed during progressive shortening and thickening of the Robertson Bay accretionary complex. Our data attest that orogenic deformation was mainly controlled by dissolution–precipitation creep, modulated by stress‐ and strain‐rate‐dependent fluid pressure cycling, associated with local and regional permeability variations induced by the distribution and evolution of the fracture network during regional thrusting. Fracture‐related fluid pathways constituted efficient conduits for episodic fluid flow. The dominant migrating fluid was pre‐to‐syn‐folding and associated with the migration of warm (160–200 °C) nitrogen‐ and carbonic (CO2 and CH4)‐bearing fluids. Both fluid advection and diffusive mass transfer are recognized as operative mechanisms for fluid–rock interaction and vein formation during continuous shortening. In particular, fluid–rock interaction was the consequence of dissolution–precipitation creep assisted by tectonically driven cooling fluids moving through the rock section as a result of seismic pumping. The most likely source of the migrating fluids would be the frontal part of the growing accretionary complex, where fluids from the deep levels in the hinterland are driven trough channelization operated by the thrust‐related fracture (fault) systems. 相似文献
9.
Fracture networks play a more significant role in conducting fluid flow and solute transport in fractured rock masses, comparing with that of the rock matrix. Accurate estimation of the permeability of fracture networks would help researchers and engineers better assess the performance of projects associated with fluid flow in fractured rock masses. This study provides a review of previous works that have focused on the estimation of equivalent permeability of two-dimensional (2-D) discrete fracture networks (DFNs) considering the influences of geometric properties of fractured rock masses. Mathematical expressions for the effects of nine important parameters that significantly impact on the equivalent permeability of DFNs are summarized, including (1) fracture-length distribution, (2) aperture distribution, (3) fracture surface roughness, (4) fracture dead-end, (5) number of intersections, (6) hydraulic gradient, (7) boundary stress, (8) anisotropy, and (9) scale. Recent developments of 3-D fracture networks are briefly reviewed to underline the importance of utilizing 3-D models in future research. 相似文献
10.
Poro‐mechanical and thermo‐mechanical processes change the fracture aperture and thus affect the water flow pattern in the fracture during the cold water injection into enhanced geothermal systems (EGS). In addition, the stresses generated by these processes contribute to the phenomenon of reservoir seismicity. In this paper, we present a three‐dimensional (3D) partially coupled poro‐thermoelastic model to investigate the poroelastic and thermoelastic effects of cold water injection in EGS. In the model, the lubrication fluid flow and the convective heat transfer in the fracture are modeled by the finite element method, while the pore fluid diffusion and heat conductive transfer in the reservoir matrix are assumed to be 3D and modeled by the boundary integral equation method without the need to discretize the reservoir. The stresses at the fracture surface and in the reservoir matrix are obtained from the numerical model and can be used to assess the variation of in situ stress and induced seismicty with injection/extraction. Application of the model shows that rock cooling induces large tensile stresses and increases fracture conductivity, whereas the rock dilation caused by fluid leakoff decreases fracture aperture and increases compressive total stresses around the injection zone. However, increases in pore pressure reduce the effective stresses and can contribute to rock failure, fracture slip, and microseismic activity. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
11.
构造成矿非线性动力学:2.湘西金矿研究实例 总被引：1，自引：0，他引：1
应用递增应力流变学方法对湘西沃溪金矿成矿过程中构造变形、应力、流体流动、地球化学反应及成岩成矿作用等多过程间的耦合作用和非线性特征进行了模拟和分析。构造压溶作用对矿源层中成矿物质的溶解与迁移起了重要作用。断裂作用可以产生比原岩渗透率高近4个数量级的断裂渗透率,从而促进流体的流动、组分扩散和在断裂中的汇聚成矿。不同岩性对断裂作用和断裂渗透率的演化有重要影响,并且构造、流体、岩石之间存在强烈的非线性耦合作用,马底驿组中段是最有利的构造成矿层位。 相似文献
12.
D. I. Garagash 《国际地质力学数值与分析法杂志》2006,30(14):1439-1475
This paper analyses the problem of a fluid‐driven fracture propagating in an impermeable, linear elastic rock with finite toughness. The fracture is driven by injection of an incompressible viscous fluid with power‐law rheology. The relation between the fracture opening and the internal fluid pressure and the fracture propagation in mobile equilibrium are described by equations of linear elastic fracture mechanics (LEFM), and the flow of fluid inside the fracture is governed by the lubrication theory. It is shown that for shear‐thinning fracturing fluids, the fracture propagation regime evolves in time from the toughness‐ to the viscosity‐dominated regime. In the former, dissipation in the viscous fluid flow is negligible compared to the dissipation in extending the fracture in the rock, and in the later, the opposite holds. Corresponding self‐similar asymptotic solutions are given by the zero‐viscosity and zero‐toughness (J. Numer. Anal. Meth. Geomech. 2002; 26 :579–604) solutions, respectively. A transient solution in terms of the crack length, the fracture opening, and the net fluid pressure, which describes the fracture evolution from the early‐time (toughness‐dominated) to the large‐time (viscosity‐dominated) asymptote is presented and some of the implications for the practical range of parameters are discussed. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
13.
The evolution of fluid chemistry in compacting rock is controlled by coupled chemical processes and rock deformation. In order to characterize this evolution, we conducted water-rock interaction experiments using quartz aggregates at 150 °C and effective pressure of 34.5 MPa. A coupled fluid flow, chemical reaction, and creep compaction model is developed, in which both free-surface reaction and grain-contact dissolution are considered as system volume and porosity evolve.The direct experimental measurement and numerical modeling indicate that effective pressure has significant effects on pore-fluid chemistry. At the early stages of compaction, pore fluids are supersaturated with respect to bulk quartz. With increasing compaction and time, solute concentrations gradually decrease to saturated conditions. Supersaturation is caused mainly by dissolution of ultrafines and high-energy, unstable surfaces which are produced by stress concentrations at grain contacts during the very early stages of compaction. Grain-contact dissolution also contributes to the solute increase in pore fluid in the early stage of compaction, but the effect is small compared to that of ultrafines and unstable surfaces and only slight supersaturation can be produced by it. The gradual decrease in pore-fluid concentration is related to the mechanical removal of ultrafines by pore-fluid flow and the dissolution of ultrafines and unstable surfaces. It also results from the lessening of grain-contact dissolution.Pore fluids in compacting sedimentary basins of quartz sandstone are nearly saturated throughout most of diagenetic processes. Ultrafines and unstable surfaces produced by stress appear not to be the major sources of quartz cement. 相似文献
14.
Heat exchange during laminar flow in an open fracture is studied numerically on the basis of the Stokes equation in the limit of hydrothermal lubrication. We examine the influence of fracture roughness on hydraulic permeability and heat flux through the fracture sides when a cold fluid is injected into a homogeneous hot host rock. Spatial temperature fluctuations inside the fluid are studied assuming the temperature of the rock to be constant and the fracture aperture to be self-affine. An application to the case study at the deep geothermal reservoir of Soultz-sous-Forêts, France, is presented. Finally, a thermal model based on sparse spatial information of the geometrical aperture is successfully proposed to reproduce the response of the fracture. 相似文献
15.
在使用Yasuhara等建立的裂隙开度的应力腐蚀和压力溶解模型的基础上,将溶质浓度场引入笔者已开发的双重孔隙-裂隙介质热-水-应力耦合的二维有限元分析程序中,针对一个假设的位于非饱和岩体中且有核素泄漏的高放废物地质处置库,拟定2种计算工况：（1）裂隙开度随应力腐蚀和压力溶解而变化（基岩的孔隙率亦是应力的函数）;（2）裂隙开度和基岩的孔隙率均为常数,进行热-水-应力-迁移耦合的数值模拟,考察了岩体中的温度、裂隙开度的闭合速率、闭合量、孔（裂）隙水压力、地下水流速、核素浓度和应力的变化、分布等情况。结果主要显示：应力腐蚀引起的闭合速率要高于压力溶解引起的闭合速率6个数量级,且两种因素产生的闭合速率随时间先增加后减小,并趋于稳定;当考虑应力腐蚀和压力溶解时,近场的负裂隙水压力上升很高;工况1中裂隙开度和孔隙率减小,使得相应的渗透系数降低,故该工况的裂隙和孔隙中核素浓度较工况2为高;由于不计入负的孔（裂）隙水压力对应力平衡的影响,2种工况的岩体中的应力量值及分布基本相同。 相似文献
16.
等效水力隙宽和水力梯度对岩体裂隙网络非线性渗流特性的影响 总被引：1，自引：0，他引：1
等效水力隙宽和水力梯度是影响岩体裂隙网络渗流特性的重要因素。制作裂隙网络试验模型,建立高精度渗流试验系统;求解纳维-斯托克斯方程,模拟流体在裂隙网络内的流动状态,研究等效水力隙宽和水力梯度对非线性渗流特性的影响。结果表明,当水力梯度较小时,等效渗透系数保持恒定的常数,流体流动属于达西流动区域,流量与压力具有线性关系,可采用立方定律计算流体流动;当水力梯度较大时,等效渗透系数随着水力梯度的增加而急剧减少,流体流动进入强惯性效应流动区域,流量与压力具有强烈的非线性关系,可采用Forchheimer方程计算流体流动。随着等效水力隙宽的增加,区别线性和非线性流动区域的临界水力梯度呈幂函数关系递减。当水力梯度小于临界水力梯度时,控制方程可选立方定律;当水力梯度大于临界水力梯度时,控制方程可选Forchheimer方程,其参数A和B可根据经验公式计算得到。其研究结果可为临界水力梯度的确定及流体流动控制方程的选取提供借鉴意义。 相似文献
17.
This paper presents the development of a discrete fracture model of fully coupled compressible fluid flow, adsorption and geomechanics to investigate the dynamic behaviour of fractures in coal. The model is applied in the study of geological carbon dioxide sequestration and differs from the dual porosity model developed in our previous work, with fractures now represented explicitly using lower-dimensional interface elements. The model consists of the fracture-matrix fluid transport model, the matrix deformation model and the stress-strain model for fracture deformation. A sequential implicit numerical method based on Galerkin finite element is employed to numerically solve the coupled governing equations, and verification is completed using published solutions as benchmarks. To explore the dynamic behaviour of fractures for understanding the process of carbon sequestration in coal, the model is used to investigate the effects of gas injection pressure and composition, adsorption and matrix permeability on the dynamic behaviour of fractures. The numerical results indicate that injecting nonadsorbing gas causes a monotonic increase in fracture aperture; however, the evolution of fracture aperture due to gas adsorption is complex due to the swelling-induced transition from local swelling to macro swelling. The change of fracture aperture is mainly controlled by the normal stress acting on the fracture surface. The fracture aperture initially increases for smaller matrix permeability and then declines after reaching a maximum value. When the local swelling becomes global, fracture aperture starts to rebound. However, when the matrix permeability is larger, the fracture aperture decreases before recovering to a higher value and remaining constant. Gas mixtures containing more carbon dioxide lead to larger closure of fracture aperture compared with those containing more nitrogen. 相似文献
18.
In this paper, a numerical model is developed for the fully coupled hydro‐mechanical analysis of deformable, progressively fracturing porous media interacting with the flow of two immiscible, compressible wetting and non‐wetting pore fluids, in which the coupling between various processes is taken into account. The governing equations involving the coupled solid skeleton deformation and two‐phase fluid flow in partially saturated porous media including cohesive cracks are derived within the framework of the generalized Biot theory. The fluid flow within the crack is simulated using the Darcy law in which the permeability variation with porosity because of the cracking of the solid skeleton is accounted. The cohesive crack model is integrated into the numerical modeling by means of which the nonlinear fracture processes occurring along the fracture process zone are simulated. The solid phase displacement, the wetting phase pressure and the capillary pressure are taken as the primary variables of the three‐phase formulation. The other variables are incorporated into the model via the experimentally determined functions, which specify the relationship between the hydraulic properties of the fracturing porous medium, that is saturation, permeability and capillary pressure. The spatial discretization is implemented by employing the extended finite element method, and the time domain discretization is performed using the generalized Newmark scheme to derive the final system of fully coupled nonlinear equations of the hydro‐mechanical problem. It is illustrated that by allowing for the interaction between various processes, that is the solid skeleton deformation, the wetting and the non‐wetting pore fluid flow and the cohesive crack propagation, the effect of the presence of the geomechanical discontinuity can be completely captured. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
19.
Based on the combined finite-discrete element method (FDEM), a two-dimensional coupled hydro-thermal model is proposed. This model can simulate fluid flow and heat transfer in rock masses with arbitrary complex fracture networks. The model consists of three parts: a heat conduction model of the rock matrix, a heat-transfer model of the fluid in the fracture (including the heat conduction and convection of fluid), and a heat exchange model between the fluid and rock at the fracture surface. Three examples with analytical solutions are given to verify the correctness of the coupled model. Finally, the coupled model is applied to hydro-thermal coupling simulations of a rock mass with a fracture network. The temperature field evolution, the effect of thermal conductivity of the rock matrix thermal conductivity and the fracture aperture on the outlet temperature are studied. The coupled model presented in this paper will enable the application of FDEM to study rock rupture driven by the effect of hydro-thermo-mechanical coupling in geomaterials such as in geothermal systems, petroleum engineering, environmental engineering and nuclear waste geological storage.
相似文献20.
Selected gas pulse tests on initially saturated claystone samples under isotropic confinement pressure are simulated using a 3D thermo‐hydro‐mechanical code. The constitutive model considers the hydro‐mechanical anisotropy of argillaceous rocks. A cross‐anisotropic linear elastic law is adopted for the mechanical behaviour. Elements for a proper modelling of gas flow along preferential paths include an embedded fracture permeability model. Rock permeability and its retention curve depend on strains through a fracture aperture. The hydraulic and mechanical behaviours have a common anisotropic structure. Small‐scale heterogeneity is considered to enhance the initiation of flow through preferential paths, following the direction of the bedding planes. The numerical simulations were performed considering two different bedding orientations, parallel and normal to the imposed flow in the test. Simulations are in agreement with recorded upstream and downstream pressures in the tests. The evolution of fluid pressures, degree of saturation, element permeability and stress paths are presented for each case analysed. This information provides a good insight into the mechanisms of gas transport. Different flow patterns are obtained depending on bedding orientation, and the results provide an explanation for the results obtained in the tests. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献