共查询到20条相似文献，搜索用时 31 毫秒
1.
As a contribution to the deepwater oil and gas industry, this paper addresses the use of optimization techniques together with a design of experiments (DOE) assessment, as a way of automating the design of compliant vertical access risers (CVARs) while also leading to an optimal riser configuration based on some desired efficiency parameters. The CVAR is a new riser concept that can improve the structural performance of the production system and also provide several operational benefits. The DOE is a statistical technique that provides an objective measure of how design parameters are correlated and the effective contribution of each one at the riser performance. Based on such a study some general conclusive remarks on the global behavior of CVAR will be presented. Such results also play an important role for the optimization process, as it can highlight significant design parameters, enabling design simplifications and efficiency improvement. For optimization assessment, geometric parameters are taken as the design variables and the design constraints consider both structural integrity and operational criteria. A multi-objective approach is considered taking into account the structural performance and geometric criteria. Optimal solution is obtained by NSGA-II method. Extreme and operational environmental conditions of a Brazilian offshore field are used as the base case. 相似文献
2.
由于良好的疲劳特性,自由站立式立管(FSHR)正广泛应用于深海油气田的开发当中。首先根据设计参数建立FSHR详细的有限元模型,然后利用谱分析方法对FSHR进行总体运动疲劳分析,以确定FSHR总体设计参数是否满足运动疲劳要求。最后对工作于相同环境下的钢悬链立管(SCR)进行总体运动疲劳分析,探讨哪种立管系统的疲劳性能更为优良。计算结果表明FSHR系统中刚性主管最大运动疲劳损伤出现在刚性主管顶部,FSHR总体设计参数满足规范要求;FSHR总体运动疲劳寿命要远大于SCR,体现了FSHR系统对浮体运动与刚性主管之间具有良好的解耦作用。 相似文献
3.
Combining high precision numerical analysis methods with optimization algorithms to make a systematic exploration of a design space has become an important topic in the modern design methods. During the design process of an underwater glider''s flying-wing structure, a surrogate model is introduced to decrease the computation time for a high precision analysis. By these means, the contradiction between precision and efficiency is solved effectively. Based on the parametric geometry modeling, mesh generation and computational fluid dynamics analysis, a surrogate model is constructed by adopting the design of experiment (DOE) theory to solve the multi-objects design optimization problem of the underwater glider. The procedure of a surrogate model construction is presented, and the Gaussian kernel function is specifically discussed. The Particle Swarm Optimization (PSO) algorithm is applied to hydrodynamic design optimization. The hydrodynamic performance of the optimized flying-wing structure underwater glider increases by 9.1%. 相似文献
4.
针对在南海海域频发的台风自然灾害,考虑海况随机性、结构随机性以及作业参数的随机性,采用梯度投影确定取样点的响应面法,分别建立P2D、D2P和P2P(P指生产立管,D指钻井立管)三种作业模式下TLP串行立管系统的结构极限状态方程。并在建立立管可靠性分析模型的基础上,确定一种立管可靠度计算方法。算例结合南海某TLP平台给出了上述方法的具体应用。研究表明,10年一遇台风情况下,P2D、D2P和P2P三种工况中生产立管系统的失效概率均小于0.001%,钻井立管系统的可靠度分别为0.016%和0.113%。在大于200年一遇的强台风情况下,P2P工况时的上下游生产立管系统失效概率均大于0.32%和0.018%。因此建议10年一遇台风情况下,停止钻井立管作业;在大于200年一遇的强台风情况下,停止生产立管作业。研究结果可为南海TLP立管系统可靠度评估及安全作业技术支持。 相似文献
5.
The paper deals with the reliability-based design optimization (RBDO) of a riser support installed on a floating production storage and offloading (FPSO) unit under operation, extreme, damaged, and one line failure cases and installation loading conditions. The optimization problem is formulated such that probabilistic thickness variables described with random characteristics are determined by minimizing the weight of the riser support structure subjected to stress constraints for the given target reliability. The initial design model is generated based on actual FPSO riser support specifications. The finite element analysis is conducted using NASTRAN, and the probabilistic optimal solutions are obtained via the moving least squares method in the context of RBDO using a response surface meta-model. For the meta-modeling of the inequality constraint functions of stresses, a constraint-feasible moving least squares method (CF-MLSM) is adopted in the present study. The CF-MLSM has been shown to ensure constraint feasibility regardless of the nonlinearity of the constraint function, the feasible bounds, and the random characteristics during the meta-model-based RBDO process. The solution results from the proposed RBDO strategy present improved design performances under various riser operating conditions. 相似文献
6.
基于三维频域势流理论,计算船体的水动力参数;采用动态耦合方法分析了深海半潜式生产平台各系统之间的相互作用特征,研究了立管系统对锚泊系统定位能力的影响。计算结果表明,立管系统在一定程度上增加了整个系统的刚度,其所受的附加质量和阻尼可降低平台的低频响应,从而降低平台的偏移和系泊缆的张力;海流将增大立管上的拖曳力,使平台偏移更远,锚索上的张力更大;立管系统对锚泊系统定位性能的最终影响需综合考虑多种因素的叠加。对目标平台而言,由于服役海域的流速较大,对立管的拖曳作用较为明显。因此,为确保平台的安全性,当服役海域流速较大时,带有多立管的平台,其锚泊系统的设计应考虑立管的影响。 相似文献
7.
This paper is concerned with the determination of dynamic load variations in the riser and yoke pivot components of an offshore vessel/mooring oil production and storage system.Forces on the yoke system arise from wave induced inertial and drag forces including current and motion due to vessel surge, heave and pitch.The analysis is carried out in the frequency domain and the results yield the limiting wave height for a specific design of SALS which will give rise to loss of tension in the riser. Also presented are the maximum horizontal and vertical components of load variation at the yoke pivoted connections with the vessel. 相似文献
8.
Felipe Alexander Vargas Bazán Edison Castro Prates de Lima Marcos Queija de Siqueira Elizabeth Frauches Netto Siqueira Carlos Alberto Duarte de Lemos 《Applied Ocean Research》2011,33(4):344-365
In riser structural systems, the region where the riser is connected to the platform is critical due to the development of high stress levels. To reduce the stress concentration in this region, bend stiffeners and stress joints are used in order to provide a gradual stiffness transition between the riser and the platform. The present paper presents an optimization design approach for bend stiffeners and stress joints, using a slender beam procedure for the connection joint analysis and an evolution strategies multi-objective optimization algorithm. This approach produces similar results when compared to a finite element analysis of the complete riser, but with significant reduction of computational costs. Numerical examples are presented, showing the efficiency and robustness of the suggested methodology. 相似文献
9.
During the drilling of ultra-deep-water subsea petroleum wells, a blow-out preventer (BOP), a piece of safety equipment, must be assembled on the wellhead. The BOP is suspended using the drilling riser during the wellhead approach operation, and the riser's top end is connected to the floating platform rig. This article presents a feedback control system for the automatic approach of the BOP to the wellhead. Compared to state-of-the-art controls, ours does not require ancillary thrusters installed alongside the riser nor inclination sensors atop of the drilling riser. Additionally, our proposed control embeds a closed-loop dynamic positioning system, thus retaining the characteristics of the original control system and adding an extra closed-loop. This eases implementation of the BOP approach control to an existing platform. To calculate the optimal gains for the BOP controller, we assume a linear system for the riser, including only the pendulum-shape. The simulation is carried out using nonlinear models for both riser and floating platform. We assume an International Towing Tank Conference standard semi-submersible platform, coupled with a 3000-m free-hanging vertical riser for the time-domain simulation. The results show the BOP tracking to be a step-shaped input signal under current and wave loads. A discussion of the performance of feedback control under different environmental loads is also included. 相似文献
10.
In the present study, the dynamic and fatigue characteristics of two types of stress joints are investigated under ocean environmental condition. Connected with the riser and the platform, stress joint at the vessel hang-off position should be one of the main critical design challenges for a steel catenary riser (SCR) in deepwater. When the riser is under a high pressure and deepwater working condition, the stress state for the joint is more complex, and the fatigue damage is easy to occur at this position. Stress joint discussed in this paper includes two types: Tapered Stress Joint (TSJ) and Sleeved Stress Joint (SSJ), and multiaxial fatigue analysis results are given for comparison. Global dynamic analysis for an SCR is performed first, and then the local boundary conditions obtained from the previous analysis are applied to the stress joint FE model for the later dynamic and multiaxial fatigue analysis. Results indicate that the stress level is far lower than the yield limit of material and the damage induced by fatigue needs more attention. Besides, the damage character of the two types of stress joints differs: for TSJ, the place where the stress joint connects with the riser is easy to occur fatigue damage; for SSJ, the most probable position is at the place where the end of the inner sleeve pipe contacts with the riser body. Compared with SSJ, TSJ shows a higher stress level but better fatigue performance, and it will have a higher material cost. In consideration of various factors, designers should choose the most suitable type and also geometric parameters. 相似文献
11.
缓波型立管由于设计参数较多且优化目标之间相互影响,设计结果具有很大的不确定性。随着代理模型和智能优化算法的发展,针对缓波型立管的优化可以提出更好的解决方案。以提高力学性能和经济效益为优化目标,采用基于Kriging插值模型和NSGA-II算法的多目标优化策略,对考虑顶部浮体影响的深水缓波型立管进行动力响应分析,并开展线型—截面双目标优化集成设计和线型—浮筒三目标优化集成设计。将处于不同几何尺度的设计变量进行集成,旨在各目标存在相互竞争的情况下,与截面、浮筒设计形成有效互动以提高线型设计的总体性能。结果表明,Pareto最优解集可提供多个选择方案,以满足工程实际需要。将所选最优方案与初始设计进行对比,并以疲劳性能和成本估算作为优化的校核指标,取得了理想的优化效果。 相似文献
12.
As drilling operations move into remote locations and extreme water depths, recoil analysis requires more careful considerations and the incidence of emergency disconnect is increased inevitably. To accurately capture the recoil dynamics of a deep-water riser in an emergency disconnect scenario, researchers typically focus on modelling the influential subsystems (e.g., the tensioner, the mud discharge and seawater refilling process) which can be solved in the preprocessing, and then the determined parameters are transmitted into an existing global riser analysis software. Distinctively, the current study devotes efforts into the coupling effects resulting from that the suspended riser reacts the platform heave motion via the tensioner system in the course of recoil and the discharging fluid column follows the oscillation of the riser in the mud discharge process. Four simulation models are established based on lumped mass method employing different formulas for the top boundary condition of the riser and the discharging flow acceleration. It demonstrates that the coupling effects discussed above can significantly affect the recoil behavior during the transition phase from initial disconnect to the final hang-off state. It is recommended to develop a fully- coupled integrated model for recoil analysis and anti-recoil control system design before extreme deep-water applications. 相似文献
13.
Bias correction of sea surface temperature retrospective fore-casts in the South China Sea 总被引：2，自引：1，他引：1
Guijun Han Jianfeng Zhou Qi Shao Wei Li Chaoliang Li Xiaobo Wu Lige Cao Haowen Wu Yundong Li Gongfu Zhou 《海洋学报(英文版)》2022,41(2):41-50
Offline bias correction of numerical marine forecast products is an effective post-processing means to improve forecast accuracy. Two offline bias correction methods for sea surface temperature(SST) forecasts have been developed in this study: a backpropagation neural network(BPNN) algorithm, and a hybrid algorithm of empirical orthogonal function(EOF) analysis and BPNN(named EOF-BPNN). The performances of these two methods are validated using bias correction experiments implemented in the South... 相似文献
14.
Deep-sea mining (DSM) is an advanced concept. A simulation method of coupled vessel/riser/body system in DSM combined with dynamic positioning (DP) is proposed. Based on the three-dimensional potential flow theory, lumped mass method, and Morison’s equations the dynamic models of the production support vessel, riser and slurry pump are established. A proportion integration differentiation (PID) controller with a nonlinear observer and a thrust allocation unit are used to simulate the DP system. Coupled time domain simulation is implemented with the vessel operated in two DP modes. Results of the vessel and pump motions, riser tension, and thruster forces are obtained. It shows that the pump will be lifted by the riser when the vessel is chasing the next set point. Riser tension is influenced by the wave frequency motions of the vessel in positioning mode and low-frequency motions in tracking mode. The proposed simulation scheme is practical to study the DSM operation. 相似文献
15.
In recent years, offshore reservoirs have been developed in deeper and deeper water environments. Steel catenary risers (SCRs) are being considered in deepwater development such as Northern North Sea. SCRs used in conjunction with a semi-submersible or floating production, storage and offloading (FPSO) in deepwater harsh environments present significant design challenges. The large vertical motions at the semi or FPSO induce severe riser response, which results in difficulty meeting strength and fatigue criteria at the hang off and touch down point locations. To improve the understanding of SCR behaviour and increase the confidence in the design of such systems in deepwater harsh environments, a parametric study on a SCR connected to a semi-submersible was carried out in this paper to deal with the factors that mainly influence the loading condition and fatigue life of the riser. Weight-optimized configurations were applied during the course of riser design. Riflex combined with DeepC was the primary analysis tool used for the long-term response of the nonlinear SCR structure simulations, which requires a large amount of computer time. Hence, the parameters affecting the efficiency and accuracy of the simulations have also been studied during the analysis process. 相似文献
16.
AbstractDeep-sea mining (DSM) is an advanced technology. This article is focused on the dynamic analysis of a coupled vessel/riser/equipment system of a DSM based on radial basis function (RBF) neural network approximations while considering vessel dynamic positioning (DP) and active heave compensation (AHC). A coupled model including the production support vessel (PSV), lifting riser, and slurry pump is established containing simulated DP and AHC models. Furthermore, dynamic simulations are implemented to obtain the results of the vessel motions, thruster forces, pump motions and riser tensions. Using optimal Latin hypercube sampling, an RBF neural network approximation model is established, the input includes environmental factors and the output includes the dynamic responses of the pump motion and riser tension. Calculations are performed using RBF network approximations instead of a coupled model. The obtained results show that the PSV wave frequency (WF) motions have significant influence on the dynamic responses of the subsea system. Moreover, the current load affects the compensation effect. The RBF network approximation model can be used to reduce the required calculation time. 相似文献
17.
Nonlinear control of an active heave compensation system 总被引：2，自引：0，他引：2
Heave motion of a vessel or a rig has an adverse impact on the response of a drill-string or a riser. To compensate for heave motion, passive and active devices are usually used. Active heave compensators, in which a control system is an essential part, allow conducting operations under more extreme weather conditions than passive ones. This paper presents a constructive method to design a nonlinear controller for an active heave compensation system using an electro-hydraulic system driven by a double rod actuator. The control system reduces the effect of the heave motion of the vessel on the response of the riser by regulating the distance from the upper end of the riser to the seabed. The control development is based on Lyapunov's direct method and disturbance observers. The paper also includes a method to select the control and disturbance observer gains such that actuator saturations are avoided. Stability of the closed loop system is carefully examined. Simulation results illustrate the effectiveness of the proposed control system. 相似文献
18.
基于ABAQUS/AQUA模块,当Spar平台发生涡激运动时,对与平台相连接的柔性立管进行时域动态响应分析,得到了不同折合速度下柔性立管的应力响应曲线.对立管触地区域和悬垂段进行了细化的分析,并利用S-N曲线和Miner线性累积损伤理论对平台涡激运动引起的柔性立管疲劳损伤进行了计算.研究结果表明:平台涡激运动对立管触地区域和悬垂段的影响较大,这两部分最容易在长时间的工作中产生疲劳损伤.特别是平台运动到近点时,立管触地区域受到的应力急剧增加,这个区域是立管工作的危险区域,应该特别注意.该研究结论可以作为立管结构设计和海底铺设时的参考,通过增加立管触地区域的结构强度和优化铺设方式,从而来提高立管的疲劳寿命和系统的安全性. 相似文献
19.
Fully coupled global analysis of Floating Production Systems, including the vessel, the mooring system and the riser system is described. Design of the system can be a daunting task, involving more than 1000 load cases for global analysis. The primary driver for the mooring system and for the riser system is motion of the vessel. Vessel motions are driven by environmental forces, but are restrained by forces from the mooring and riser systems. Numerical models and procedures that provide accurate and efficient global modeling of the Floating Production System are presented. Both Time Domain and Frequency Domain procedures are included. The accuracy and efficiency of the procedures are illustrated in an example: a large semi with 16 mooring lines and 20 risers. The procedures provide the accuracy and efficiency for use of fully coupled analysis in design of Floating Production Systems from concept selection to final design, installation and operation. 相似文献