首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
MAIN CENTRAL THRUST ZONE IN THE KATHMANDU AREA, CENTRAL NEPAL, AND ITS TECTONIC SIGNIFICANCE1　AritaK ,LallmeyerRD ,TakasuA .TectonothermalevolutionoftheLesserHimalaya ,Nepal:constraintsfrom 4 0 Ar/3 9AragesfromtheKathmandunappe[J].TheIslandArc ,1997,6 :372～ 384. 2　RaiSM ,GuillotS ,LeFortP ,etal.Pressure temperatureevolutionintheKathmanduandGosainkundregions ,CentralNepal[J].JourAsianEarthSci ,1998,16 :2 83～ 2 98. 3　SchellingD ,KArita .…  相似文献   

2.
GEOLOGY OF THE NORTHERN ARUN TECTONIC WINDOW1　BordetP .Recherchesg啨ｏｌｏｇｉｑｕｅｓｄａｎｓｌ’ＨｉｍａｌａｙａｄｕＮ啨ｐａｌ,r啨ｇｉｏｎｄｕＭａｋａｌｕ[R].EditionsduCNRS ,Paris ,196 12 75 . 2　BordetP .G啨ｏｌｏｇｉｅｄｅｌａｄａｌｌｅｄｕＴｉｂｅｔ (Himalayacentral) [J].M啨ｍｏｉｒｅｓｈｏｒｓｓ啨ｒｉｅｄｅｌａＳｏｃｉｅｔ啨ｇ啨ｏｌｏｇｉｑｕｅｄｅＦｒａｎｃｅ,1977,8:2 35～ 2 5 0 . 3　BurcfielBC ,ChenZ ,HodgesKV ,etal.TheSouthTibetanDetachmentSystem ,Hima…  相似文献   

3.
This paper summarizes the studies of the metamorphic evolution of Central Nepal carried out by Nepali and international teams in the last 25 years. In Central Nepal, three metamorphic units are recognized. (1) The southernmost zone is the Lesser Himalaya, which is characterised by an inverted mineral zoning towards the Main Central Thrust (MCT) zone; (2) the Kathmandu nappe corresponds to an early (<22 Ma) out-of-sequence thrusting zone over the Lesser Himalaya along the Mahabharat thrust (MT) and is characterised by a Barrovian metamorphic evolution; (3) the Higher Himalayan Crystalline unit (HHC) is bounded at its base by the MCT and at its top by the South Tibetan Detachment system (STDS). It is characterised by successive tectonometamorphic episodes during the period spanning from 35–36 Ma to 2–3 Ma. Recent investigations suggest that the apparent metamorphic inversion througout the MCT zone does not reflect geothermal inversion. Instead, these investigations suggest successive cooling of the HHC along the MCT and the local preservation, above the MCT, of high-grade metamorphic rocks. The overall metamorphic history in Central Nepal from Oligocene to Pliocene, reflects the thermal reequilibration of rocks after thickening by conductive and advective heating and partial melting of the middle crust.  相似文献   

4.
The metamorphism in the Central Himalaya   总被引：10，自引：0，他引：10  
ABSTRACT All along the Himalayan chain an axis of crystalline rocks has been preserved, made of the Higher Himalaya crystalline and the crystalline nappes of the Lesser Himalaya. The salient points of the metamorphism, as deduced from data collected in central Himalaya (central Nepal and Kumaun), are:
  • 1 The Higher Himalaya crystalline, also called the Tibetan Slab, displays a polymetamorphic history with a first stage of Barrovian type overprinted by a lower pressure and/or higher temperature type metamorphism. The metamorphism is due to quick and quasi-adiabatic uplift of the Tibetan Slab by transport along an MCT ramp, accompanied by thermal refraction effects in the contact zone between the gneisses and their sedimentary cover. The resulting metamorphic pattern is an apparent (diachronic) inverse zonation, with the sillimanite zone above the kyanite zone.
  • 2 Conversely, the famous inverted zonation of the Lesser Himalaya is basically a primary pattern, acquired during a one-stage prograde metamorphism. Its origin must be related to the thrusting along the MCT, with heat supplied from the overlying hot Tibetan Slab, as shown by synmetamorphic microstructures and the close geometrical relationships between the metamorphic isograds and the thrust.
  • 3 Thermal equilibrium is reached between units above and below the MCT. Far behind the thrust tip there is good agreement between the maximum temperature attained in the hanging wall and the temperature of the Tibetan Slab during the second metamorphic stage; but closer to the MCT front, the thermal accordance between both sides of the thrust is due to a retrogressive metamorphic episode in the basal part of the Tibetan Slab.
  相似文献   

5.
Following the early Eocene collision of the Indian and Asian plates, intracontinental subduction occurred along the Main Central Thrust (MCT) zone in the High Himalaya. In the Kishtwar–Zanskar Himalaya, the MCT is a 2 km thick shear zone of high strain, distributed ductile deformation which emplaces the amphibolite facies High Himalayan Crystalline (HHC) unit south‐westwards over the lower greenschist facies Lesser Himalaya. An inverted metamorphic field gradient, mapped from the first appearance of garnet, staurolite and kyanite index minerals, is coincident with the high strain zone. Petrography and garnet zoning profiles indicate that rocks in the lower MCT zone preserve a prograde assemblage, whereas rocks in the HHC unit show retrograde equilibration. Thermobarometric results derived using THERMOCALC indicate a P–T increase of c. 180 °C and c. 400 MPa across the base of the MCT zone, which is a consequence of the syn‐ to postmetamorphic juxtaposition of M1 kyanite grade rocks of the HHC unit on a cooling path over biotite grade footwall rocks, which subsequently attain their peak (M2) during thrusting. Inclusion thermobarometry from the lower MCT zone reveals that M2 was accompanied by loading, and peak conditions of 537±38 °C and 860±120 MPa were attained. M1 kyanite assemblages in the HHC unit, which have not been overprinted by M2 fibrolitic sillimanite, were not significantly affected by M2, and conditions of equilibration are estimated as 742±53 °C and 960±180 MPa. There is no evidence for dissipative or downward conductive heating in the MCT zone. Instead, the primary control on the distribution of peak assemblages, represented by the index minerals, is postmetamorphic ductile thrusting in a downward propagating shear zone. Polymetamorphism and diachroneity of equilibration are also important controls on the thermal profile through the MCT zone and HHC unit.  相似文献   

6.
METAMORPHISM IN THE LESSER HIMALAYAN CRYSTALLINES AND MAIN CENTRAL THRUST ZONE IN THE ARUN VALLEY AND AMA DRIME RANGE (EASTERN HIMALAYA)1　BrunelM ,KienastJR . tudep啨ｔｒｏ structuraledeschevauchementsductileshimalayenssurlatrans versaledel’Everest Makalu (N啨ｐａｌｏｒｉｅｎｔａｌ) [J].CanadianJ .EarthSciences,1986 ,2 3:1117～ 1137. 2　LombardoB ,RolfoF .TwocontrastingeclogitetypesintheHimalayas :implicationsfortheHimalayanorogeny…  相似文献   

7.
The microstructural variation with a progressive change in the strain pattern are described in the rocks occurring across the footwall of the Main Central Thrust (MCT) in an area of the Garhwal Himalaya. In the western Garhwal Himalaya, the MCT has brought upper amphibolite facies metamorphic rocks southward over the greenschist facies rocks of the Lesser Himalaya. The progressively increasing flattening strain towards the MCT changes either to plane strain or in some cases to constrictional strain. This change in strain is well recorded in the microstructures. The zone dominated by flattening strain is expressed as bedding parallel mylonites. The grain reduction in this zone has occurred by dynamic recrystallization and quartz porphyroclasts were flattened parallel to the mylonite zone. The maximum finite strain ratio observed in this zone is 2.2:1.8:1. The zone, where the flattening strain changes either to plane strain or constrictional strain, record an increase in finite strain ratio up to 3.8:1.9:1. This zone represents deformation fabrics like S–C microstructures simultaneously developed during mylonitization in an intense ductile shear zone. The above zone is either near the MCT or adjacent to crystalline klippen occupying the core of the synforms in the footwall of the MCT. The microstructural evolution and the finite strain suggest that the MCT has evolved as the result of superposition of southward directed simple shear over the flattening strain. The simple shear has played an active role in the rapid translation which followed the mylonitization at deeper levels.  相似文献   

8.
The Lesser Himalaya in central Nepal consists of Precambrian to early Paleozoic, low- to medium-grade metamorphic rocks of the Nawakot Complex, unconformably overlain by the Upper Carboniferous to Lower Miocene Tansen Group. It is divided tectonically into a Parautochthon, two thrust sheets (Thrust sheets I and II), and a wide shear zone (Main Central Thrust zone) from south to north by the Bari Gad–Kali Gandaki Fault, the Phalebas Thrust and the Lower Main Central Thrust, respectively. The Lesser Himalaya is overthrust by the Higher Himalaya along the Upper Main Central Thrust (UMCT). The Lesser Himalaya forms a foreland-propagating duplex structure, each tectonic unit being a horse bounded by imbricate faults. The UMCT and the Main Boundary Thrust are the roof and floor thrusts, respectively. The duplex is cut-off by an out-of-sequence fault. At least five phases of deformation (D1–D5) are recognized in the Lesser Himalaya, two of which (D1 and D2) belong to the pre-Himalayan (pre-Tertiary) orogeny. Petrographic, microprobe and illite crystallinity data show polymetamorphic evolution of the Lesser and Higher Himalayas in central Nepal. The Lesser Himalaya suffered a pre-Himalayan (probably early Paleozoic) anchizonal prograde metamorphism (M0) and a Neohimalayan (syn- to post-UMCT) diagenetic to garnet grade prograde inverted metamorphism (M2). The Higher Himalaya suffered an Eohimalayan (pre or early-UMCT) kyanite-grade prograde metamorphism (M1) which was, in turn, overprinted by Neohimalayan (syn-UMCT) retrograde metamorphism (M2). The isograd inversion from garnet zone in the Lesser Himalaya to kyanite zone in the Higher Himalaya is only apparent due to post-metamorphic thrusting along the UMCT. Both the Lesser and Higher Himalayas have undergone late-stage retrogression (M3) during exhumation.  相似文献   

9.
We present the results of a structural transect in Lower Dolpo, cross-cutting the upper part of the Lesser Himalaya (LH), the Higher Himalayan Crystallines (HHC) and the lower part of the Tibetan Sedimentary Sequence (TSS). The MCT zone affects the upper part of the LH as well as the lower part of the HHC and shows a later brittle reactivation. Mean vorticity in the MCT points to non-coaxial deformation. These data, together with available kinematic data along the belt, on the South Tibetan Detachment System (STDS) and in the core of the HHC, point to increasing simple shear toward the tectonic boundaries. A top-to-the-SW high-temperature shear zone (Toijem Shear Zone) is recognized in the middle part of the HHC at the boundary between Units 1 and 2. It developed during the earlier stages of exhumation of the HHC, enhancing the decompression of the hanging wall and the emplacement of leucogranite dykes and sills. Its development could be explained by a change in the velocity profile during the extrusion of the HHC, triggered by first order changes in rock types of the tectonic unit. The STDS is marked by a wide zone of high strain and by a metamorphic jump from amphibolite facies in the carbonate rocks of the upper part of the HHC to greenschist facies marbles in the lower part of the TSS. The development of a pervasive foliation towards the bottom of the TSS indicates increasing strain, related to top down-to-the-NE tectonic transport. A Low P metamorphic event, marked by the growth of post-D1 biotite porphyroblasts at the base of the TSS, is related to the conductive heating from the underlying HHC.  相似文献   

10.
Nepal can be divided into the following five east–west trending major tectonic zones. (i) The Terai Tectonic Zone which consists of over one km of Recent alluvium concealing the Churia Group (Siwalik equivalents) and underlying rocks of northern Peninsular India. Recently active southward-propagating thrusts and folds beneath the Terai have affected both the underlying Churia and the younger sediments. (ii) The Churia Zone, which consists of Neogene to Quaternary foreland basin deposits and forms the Himalayan mountain front. The Churia Zone represents the most tectonically active part of the Himalaya. Recent sedimentologic, geochronologic and paleomagnetic studies have yielded a much better understanding of the provenance, paleoenvironment of deposition and the ages of these sediments. The Churia Group was deposited between ∼14 Ma and ∼1 Ma. Sedimentary rocks of the Churia Group form an archive of the final drama of Himalayan uplift. Involvement of the underlying northern Peninsular Indian rocks in the active tectonics of the Churia Zone has also been recognised. Unmetamorphosed Phanerozoic rocks of Peninsular India underlying the Churia Zone that are involved in the Himalayan orogeny may represent a transitional environment between the Peninsula and the Tethyan margin of the continent. (iii) The Lesser Himalayan Zone, in which mainly Precambrian rocks are involved, consists of sedimentary rocks that were deposited on the Indian continental margin and represent the southernmost facies of the Tethyan sea. Panafrican diastrophism interrupted the sedimentation in the Lesser Himalayan Zone during terminal Precambrian time causing a widespread unconformity. That unconformity separates over 12 km of unfossiliferous sedimentary rocks in the Lesser Himalaya from overlying fossiliferous rocks which are >3 km thick and range in age from Permo-Carboniferous to Lower to Middle Eocene. The deposition of the Upper Oligocene–Lower Miocene fluvial Dumri Formation records the emergence of the Himalayan mountains from under the sea. The Dumri represents the earliest foreland basin deposit of the Himalayan orogen in Nepal. Lesser Himalayan rocks are less metamorphosed than the rocks of the overlying Bhimphedis nappes and the crystalline rocks of the Higher Himalayan Zone. A broad anticline in the north and a corresponding syncline in the south along the Mahabharat range, as well as a number of thrusts and faults are the major structures of the Lesser Himalayan Zone which is thrust over the Churia Group along the Main Boundary Thrust (MBT). (iv) The crystalline high-grade metamorphic rocks of the Higher Himalayan Zone form the backbone of the Himalaya and give rise to its formidable high ranges. The Main Central Thrust (MCT) marks the base of this zone. Understanding the origin, timing of movement and associated metamorphism along the MCT holds the key to many questions about the evolution of the Himalaya. For example: the question of whether there is only one or whether there are two MCTs has been a subject of prolonged discussion without any conclusion having been reached. The well-known inverted metamorphism of the Himalaya and the late orogenic magmatism are generally attributed to movement along the MCT that brought a hot slab of High Himalayan Zone rocks over the cold Lesser Himalayan sequence. Harrison and his co-workers, as described in a paper in this volume, have lately proposed a detailed model of how this process operated. The rocks of the Higher Himalayan Zone are generally considered to be Middle Cambrian to Late Proterozoic in age. (v) The Tibetan Tethys Zone is represented by Cambrian to Cretaceous-Eocene fossiliferous sedimentary rocks overlying the crystalline rocks of the Higher Himalaya along the Southern Tibetan Detachment Fault System (STDFS) which is a north dipping normal fault system. The fault has dragged down to the north a huge pile of the Tethyan sedimentary rocks forming some of the largest folds on the Earth. Those sediments are generally considered to have been deposited in a more distal part of the Tethys than were the Lesser Himalayan sediments.The present tectonic architecture of the Himalaya is dominated by three master thrusts: the Main Central Thrust (MCT), the Main Boundary Thrust (MBT) and the Main Frontal Thrust (MFT). The age of initiation of these thrusts becomes younger from north to south, with the MCT as the oldest and the MFT as the youngest. All these thrusts are considered to come together at depth in a flat-lying decollement called the Main Himalayan Thrust (MHT). The Mahabharat Thrust (MT), an intermediate thrust between the MCT and the MBT is interpreted as having brought the Bhimphedi Group out over the Lesser Himalayan rocks giving rise to Lesser Himalayan nappes containing crystalline rocks. The position of roots of these nappes is still debated. The Southern Tibetan Detachment Fault System (STDFS) has played an important role in unroofing the higher Himalayan crystalline rocks.  相似文献   

11.
The Lesser Himalayan low- to medium-grade metamorphic rocks in central Nepal are rich in K-white micas occurring as porphyroclasts and in matrix defining S1 and S2. Porphyroclasts are usually zoned with celadonite-poor cores and celadonite-rich rims. The cores are the relics of igneous or high grade metamorphic muscovites, and the rims were re-equilibrated or overgrown under lower T metamorphic conditions. The matrix K-white micas defining S1, pre-dating the Main Central Thrust activity, are generally celadonite-rich. They show heterogeneous compositional zoning with celadonite-rich cores and celadonite-poor rims. They were recrystallized at lower T condition prior to the Main Central Thrust activity, most probably prior to the India–Asia collision (pre-Himalayan metamorphism). The matrix K-white micas along S2, synchronous to the Main Central Thrust activity (Neohimalayan metamorphism), are relatively celadonite-poor and were recrystallized under relatively higher T condition. K-white micas defining S1 also were partially re-equilibrated during the Neohimalayan metamorphism. The average compositions of recrystallized K-white micas defining both S1 and S2 become gradually poor in (Fe + Mg)- and Si-contents and rich in Al- and Ti-contents from south to north showing an increase of metamorphic grade from structurally lower to higher parts in the Lesser Himalaya. This shows that the metamorphism is inverted throughout the inner Lesser Himalaya. The tectono-metamorphic significance of the published K–Ar and 40Ar / 39Ar K-white micas ages from the Lesser Himalaya need re-evaluation in the context of observed intrasample compositional variation and zoning, and possible higher closure temperature (500 °C) for K–Ar system.  相似文献   

12.
Almora Nappe in Uttarakhand, India, is a Lesser Himalayan representative of the Himalayan Metamorphic Belt that was tectonically transported over the Main Central Thrust (MCT) from Higher Himalaya. The Basal Shear zone of Almora Nappe shows complicated structural pattern of polyphase deformation and metamorphism. The rocks exposed along the northern and southern margins of this nappe are highly mylonitized while the degree of mylonitization decreases towards the central part where the rocks eventually grade into unmylonitized metamorphics.Mylonitized rocks near the roof of the Basal Shear zone show dynamic metamorphism (M2) reaching upto greenschist facies (～450 °C/4 kbar). In the central part of nappe the unmylonitized schists and gneisses are affected by regional metamorphism (M1) reaching upper amphibolite facies (～4.0–7.9 kbar and ～500–709 °C). Four zones of regional metamorphism progressing from chlorite–biotite to sillimanite–K-feldspar zone demarcated by specific reaction isograds have been identified. These metamorphic zones show a repetition suggesting that the zones are involved in tight F2 – folding which has affected the metamorphics. South of the Almora town, the regionally metamorphosed rocks have been intruded by Almora Granite (560 ± 20 Ma) resulting in contact metamorphism. The contact metamorphic signatures overprint the regional S2 foliation. It is inferred that the dominant regional metamorphism in Almora Nappe is highly likely to be of pre-Himalayan (Precambrian!) age.  相似文献   

13.
DIFFERENT VARIETIES OF MIOCENE LEUCOGRANITE IN THE ARUN VALLEY—EVEREST—MAKALU AREA:FIELD RELATIONS, PETROLOGY AND ISOTOPE GEOCHEMISTRY1　AritaK .OriginoftheinvertedmetamorphismoftheLowerHimalayas,CentralNepal[J] .Tectonophysics,1983,93:4 3～6 0 . 　BarbarinB .Areviewoftherelationshipsbetweengranitoidtypes,theiroriginsandtheirgeodynamicenvironments[J] .Lithos,1999,4 6 :6 0 5～ 6 2 6 . 3　BurchfielBC ,ChenZ,HodgesKV ,etal.TheSou…  相似文献   

14.
Polyphase metamorphism and the development of the Main Central Thrust   总被引：2，自引：0，他引：2  
ABSTRACT Along a cross-section through the Lesser and Higher Himalayan units at the Kishtwar window area (north-west India), a polyphase, Barrovian-type metamorphism has been delineated in relation to the development of the Main Central Thrust (MCT). In the metapelitic mineral assemblages, three metamorphic phases have been distinguished:
  • (a) conditions up to amphibolite grade at moderate to high pressures (alm + rut + ilm + kya + qtz) characterize the M1 phase;
  • (b) pressure release and/or temperature increase as a result of movement along the MCT and the formation of gneiss domes in the Higher Himalaya, as expressed by oriented (N70°-100° E) fibrolite, defines the M2 phase; and,
  • (c) finally during uplift of the Kishtwar window area, a retrogressive M3 phase is characterized by the assemblage quartz-muscovite-chlorite.
Both optically zoned and single-stage garnets have been examined with the electron microprobe to determine their element partitioning. Normal zoning has been found in samples below the MCT in the Lesser Himalaya, indicating prograde growth during the M2 phase, whereas tectonically above, in the Higher Himalaya unit, the garnets reveal double-stage growth with a complex zoning pattern due to reaction-partitioning during M1 and M2 and reverse-zoning at their rims during the retrogressive M3 phase. Geothermometry on metapelites along a cross-section through the MCT zone and the Higher Himalaya imply distinct readjustments of garnet-biotite exchange equilibria and indicate isothermal conditions (500-600° C) throughout the section during the M3 retrogression. Pressure calculations (gro-an-kya-qtz and alm-rut-ilm-kya-qtz) suggest a decrease in pressure towards the top of the section (6-7.5 to 4.5-5 kbar), as corroborated by fibrolite replacing kyanite. The spatially inverse metamorphism exposed within the Lesser Himalaya of the Kishtwar window is regarded as a product of polyphase metamorphism combined with ongoing thrusting and shearing and is reflected by condensed M2 isograds around the Kishtwar window.  相似文献   

15.
Thermobarometric data and compositional zoning of garnet show the discontinuities of both metamorphic pressure conditions at peak‐T and P–T paths across the Main Central Thrust (MCT), which juxtaposes the high‐grade Higher Himalayan Crystalline Sequences (HHCS) over the low‐grade Lesser Himalaya Sequences (LHS) in far‐eastern Nepal. Maximum recorded pressure conditions occur just above the MCT (～11 kbar), and decrease southward to ～6 kbar in the garnet zone and northward to ～7 kbar in the kyanite ± staurolite zone. The inferred nearly isothermal loading path for the LHS in the staurolite zone may have resulted from the underthrusting of the LHS beneath the HHCS. In contrast, the increasing temperature path during both loading and decompression (i.e. clockwise path) from the lowermost HHCS in the staurolite to kyanite ± staurolite transitional zone indicates that the rocks were fairly rapidly buried and exhumed. Exhumation of the lowermost HHCS from deeper crustal depths than the flanking regions, recording a high field pressure gradient (～1.2–1.6 kbar km?1) near the MCT, is perhaps caused by ductile extrusion along the MCT, not the emplacement along a single thrust, resulting in the P–T path discontinuities. These observations are consistent with the overall scheme of the model of channel flow, in which the outward flowing ‘HHCS’ and inward flowing ‘LHS’ are juxtaposed against each other and are rapidly extruded together along the ‘MCT’. A rapid exhumation by channel flow in this area is also suggested by a nearly isothermal decompression path inferred from cordierite corona surrounding garnet in gneiss of the upper HHCS. However, peak metamorphic temperatures show a progressive increase of temperature structurally upward (～570–740 °C) near the MCT and roughly isothermal conditions (～710–810 °C) in the upper structural levels of the HHCS. The observed field temperature gradient is much lower than those predicted in channel flow models. However, the discrepancy could be resolved by taking into account heat advection by melt and/or fluid migration, as these can produce low or nearly no field temperature gradient in the exhumed midcrust, as observed in nature.  相似文献   

16.
Semi‐pelitic rocks ranging in grade from the prehnite–pumpellyite to the greenschist facies from south‐eastern Otago, New Zealand, have been investigated in order to evaluate the reactions leading to formation and breakdown of stilpnomelane. Detrital grains of mica and chlorite along with fine‐grained authigenic illite and chlorite occur in lower‐grade rocks with compactional fabric parallel to bedding. At higher grades, detrital grains have undergone dissolution, and metamorphic phyllosilicates have crystallized with preferred orientation (sub)parallel to bedding, leading to slaty cleavage. Stilpnomelane is found in metapelites of the pumpellyite–actinolite facies and the chlorite zone of the greenschist facies, but only rarely in the biotite zone of the greenschist facies. Illite or phengite is ubiquitous, whereas chlorite occurs only rarely with stilpnomelane upgrade of the pumpellyite‐out isograd. Chemical and textural relationships suggest that stilpnomelane formed from chlorite, phengite, quartz, K‐feldspar and iron oxides. Stilpnomelane was produced by grain‐boundary replacement of chlorite and by precipitation from solution, overprinting earlier textures. Some relict 14 Å chlorite layers are observed by TEM to be in the process of transforming to 12 Å stilpnomelane layers. The AEM analyses show that Fe is strongly partitioned over Mg into stilpnomelane relative to chlorite (KD≈2.5) and into chlorite relative to phengite (KD≈1.9). Modified A′FM diagrams, projected from the measured phengite composition rather than from ideal KAl3Si3O10(OH)2, are used to elucidate reactions among chlorite, stilpnomelane, phengite and biotite. In addition to pressure, temperature and bulk rock composition, the stilpnomelane‐in isograd is controlled by variations in K, Fe3+/Fe2+, O/OH and H2O contents, and the locus of the isograd is expected to vary in rocks of different oxidation states and permeabilities. Biotite, quartz and less phengitic muscovite form from stilpnomelane, chlorite and phengite in the biotite zone. Projection of bulk rock compositions from phengite, NaAlO2, SiO2 and H2O reveals that they lie close to the polyhedra defined by the A′FM minerals and albite. Other extended A′FM diagrams, such as one projected from phengite, NaAlO2, CaAl2O4, SiO2 and H2O, may prove useful in the evaluation of other low‐grade assemblages.  相似文献   

17.
Pelitic units in the eastern Great Smoky Mountains of the North Carolina Blue Ridge contain rutile grains only in kyanite and higher zones. Adjacent non-pelitic rocks do not contain rutile at kyanite grade but commonly contain sphene. Detrital rutile breaks down at metamorphic grades lower than those at which metamorphic rutile forms. Similarly, pelitic rocks in southeastern Connecticut contain rutile grains above, but not below, the sillimanite isograd. Most non-pelitic rocks there contain rutile only in the hypersthene zone. The slight difference in behavior of rutile in the two terranes is attributed primarily to a slight difference in calcium content of the pelites. In both areas, rutile commonly appears first as inclusions in garnet. Geologic maps showing metamorphic and stratigraphic or compositional information should be useful as prospecting tools for placer deposits. A variety of rocks at granulite facies and pelitic rocks of the upper amphibolite facies contain rutile and these could provide an extensive source for rutile in rutile placer deposits.  相似文献   

18.
Detrital tourmaline grains and their associated tourmaline overgrowths provide a means to unravel the provenance and petrogenetic history of low grade clastic metasedimentary rocks. Evidence derives from tourmaline grains found in a lithic wacke metamorphosed to chlorite zone conditions. The detrital tourmaline cores are diagnostic indicators of the source rocks of the sediment whereas the overgrowths record both diagenetic and metamorphic reactions in the rock. Tourmaline grains consist of a detrital core surrounded by asymmetric overgrowths comprised of inner and outer rims. Abrupt chemical discontinuities between each of these zones implies that volume diffusion within tourmaline was minor under the conditions of formation. Compositions of the detrital cores vary widely, yet can be correlated with source rock types that are consistent with lithic fragments recognizable in the metawacke. At either the analogous or antilogous pole, inner rim compositions proximal to the detrital cores converge, despite the substrate tourmaline composition, indicating an approach to chemical equilibrium. However, significant dufferences in Al and X-site vacancies at the expense of Mg, Na and Ti between the analogous and antilogous poles of the inner rims demonstrate the presence of significant amounts of compositional polarity. Outer rim compositions at either pole also converge but compositional polarity between the analogous and antilogous poles persists. The presence of the inner and outer rims separated by a compositional discontinuity suggests punctuated evolution of the overgrowth. This implies that boron was sporadically available during diagenesis and metamorphism. Based on boron contents of minerals, this may correspond to a mechanism such as boron release due to polytypic change of illite or consumption of illite and/or muscovite. As such, tourmaline growth stages may serve as a monitor of chemical reactions in low grade metamorphic rocks.  相似文献   

19.
Sedimentary deposits of the Cretaceous to Miocene Tansen Group of Lesser Himalayan association in central Nepal record passive-margin sedimentation of the Indian Continent with direct deposition onto eroded Precambrian rocks (Sisne Formation onto Kaligandaki Supergroup rocks), succeeded by the appearance of orogenic detritus as the Indian continent collided with Asia on a N-dipping subduction zone. Rock samples from two field traverses were examined petrographically and through detrital zircon U–Pb dating, one traverse being across the Tansen Group and another across the Higher and Tethyan Himalaya (TH). The Tansen Group depositional ages are well known through fossil assemblages. We examined samples from three units of the Tansen Group (Amile, Bhainskati, and Dumri Formations). The Sedimentary petrographic data and Qt F L and Qm F Lt plots indicate their ‘Quartzose recycled’ nature and classify Tansen sedimentary rocks as ‘recycled orogenic’, suggesting Indian cratonic and Lower Lesser Himalayan (LLH) sediments as the likely source of sediments for the Amile Formation (Am), the TH and the Upper Lesser Himalaya (ULH) as the source for the Bhainskati Formation (Bk), and both the Tethyan and Higher Himalaya (HH) as the major sources for the Dumri Formation (Dm). The Cretaceous–Palaeocene pre-collisional Am is dominated by a broad detrital zircon U–Pb ~1830 Ma age peak with neither Palaeozoic nor Neoproterozoic zircons grains, but hosts a significant proportion (23%) of syndepositional Cretaceous zircons (121–105 Ma) would be contributions from the LLH volcanosedimentary arc, Gangdese batholith (including the Xigaze forearc). The other formations of the Tansen Group are more similar to Tethyan units than to Higher Himalaya Crystalline (HHC). From the analysed samples, there is a lack of distinctive evidence or HH detritus in the Tansen basin. Furthermore, the presence of ~23±1 Ma zircons from the HH unit suggests that they could not have been exposed until the earliest Miocene time.  相似文献   

20.
At least seven different groups of felsic magmatic rocks have been observed in the Lesser and Higher Himalayan units of Nepal. Six of them are pre-Himalayan. The Ulleri Lower Proterozoic augen gneiss extends along most of the length of the Lesser Himalaya of Nepal and represents a Precambrian felsic volcanism or plutono-volcanism, mainly recycling continental crustal material; this volcanism has contributed sediment to the lower group of formations of the Lesser Himalaya. The Ampipal alkaline gneiss is a small elongated body appearing as a window at the base of the Lesser Himalayan formations of central Nepal; it originated as a Precambrian nepheline syenite pluton, contaminated by lower continental crust. The “Lesser Himalayan” granitic belt is well represented in Nepal by nine large granitic plutons; these Cambro-Ordovician peraluminous, generally porphyritic, granites, only occur in the crystaline nappes; they were probably produced by large-scale melting of the continental crust at the northern tip of the Indian craton, during a general episode of thinning of Gondwana continent with heating and mantle injection of the crust. The Formation III augen gneisses of the Higher Himalaya, such as the augen gneiss of the Higher Himalayan crystalline nappes (Gosainkund) are coeval to the “Lesser Himalayan” granites, and their more metamorphic (lower amphibolite grade) equivalents. Limited outcrops of Cretaceous trachytic volcanism lie along the southern limb of the Lesser Himalaya and are coeval with spilitic volcanism in the Higher Himalayan sedimentary series. This volcanism foreshadows the general uplift of the Indian margin before the Himalayan collision. The predominance of felsic over basic magmatism in the 2.5 Ga-long evolution of the Himalayan domain constitutes an unique example of recycling of continental material with very limited addition of juvenile mantle products.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号