首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Mineralogical, fluid inclusion, and geochemical studies of precious metal mineralization within the Baimka trend in the western Chukchi Peninsula have been preformed. Porphyry copper–molybdenum–gold deposits and prospects of the Baimka trend are spatially related to monzonitic rocks of the Early Cretaceous Egdygkych Complex. Four types of precious metal-bearing assemblages have been identified: (1) chalcopyrite + bornite + quartz with high-fineness native gold enclosed in bornite, (2) low-Mn dolomite + quartz + sulfide (chalcopyrite, sphalerite, galena, tennantite-tetrahedrite) ± tourmaline with low-fineness native gold and hessite, (3) rhodochrosite + high-Mn dolomite + quartz + sulfide (chalcopyrite, sphalerite, galena, tennantite- tetrahedrite) with low-fineness native gold, electrum, acanthite, Ag and Au–Ag tellurides, and Ag sulfosalts, and (4) calcite + quartz + sulfide (chalcopyrite, sphalerite, galena) with low-fineness native gold, Ag sulfides and selenides, and Ag-bearing sulfosalts. Study of fluid inclusions from quartz, sphalerite, and fluorite have revealed that hydrothermal ores within the Baimka trend precipitated from fluids with strongly variable salinity at temperatures and pressures ranging from 594 to 104°C and from 1200 to 170 bar, respectively. An indicator of vertical AgPbZn/CuBiMo geochemical zoning is proposed. The value range of this indicator makes it possible to estimate the erosion level of the porphyry–epithermal system. The erosion level of the Baimka deposits and prospects deepens in the following order: Vesenny deposit → Pryamoi prospect → Nakhodka prospect → Peschanka deposit → III Vesenny prospect.  相似文献   

2.
The 7.1 Ma Broken Hills adularia-sericite Au–Ag deposit is currently the only producing rhyolite-hosted epithermal deposit in the Hauraki Goldfield of New Zealand. The opaque minerals include pyrite, electrum, acanthite (Ag2S), sphalerite, and galena, which are common in other adularia-sericite epithermal deposits in the Hauraki Goldfield and elsewhere worldwide. Broken Hills ores also contain the less common minerals aguilarite (Ag4SeS), naumannite (Ag2Se), petrovskaite (AuAgS), uytenbogaardtite (Ag3AuS2), fischesserite (Ag3AuSe2), an unnamed silver chloride (Ag2Cl), and unnamed Ag?±?Au minerals. Uytenbogaardtite and petrovskaite occur with high-fineness electrum. Broken Hills is the only deposit in the Hauraki Goldfield where uytenbogaardtite and petrovskaite have been identified, and these phases appear to have formed predominantly from unmixing of a precursor high-temperature phase under hypogene conditions. Supergene minerals include covellite, chalcocite, Au-rich electrum, barite, and a variety of iron oxyhydroxide minerals. Uytenbogaardtite can form under supergene and hypogene conditions, and textural relationships between uytenbogaardtite and associated high-fineness electrum may be similar in both conditions. Distinguishing the likely environment of formation rests principally on identification of other supergene minerals and documenting their relationships with uytenbogaardtite. The presence of aguilarite, naumannite, petrovskaite, and fischesserite at Broken Hills reflects a Se-rich mineral assemblage. In the Hauraki Goldfield and the western Great Basin, USA, Se-rich minerals are more abundant in provinces that are characterized by bimodal rhyolite–andesite volcanism, but in other epithermal provinces worldwide, the controls on the occurrences of Se-bearing minerals remain poorly constrained, in spite of the unusually high grades associated with many Se-rich epithermal deposits.  相似文献   

3.
Gold-bearing albite-amphibole-pyroxene rodingites of the Agardag ultramafic massif (southern Tuva, Russia) are confined to the E-W striking serpentinite crush zone. A zone of gold-bearing nephritoids is localized at the contact of rodingites with serpentinites. Optical and scanning electron microscopy, electron probe microanalysis, and fluorescent, chemical, ICP MS, and X-ray phase analyses were applied to study Au-Cu-Ag mineralization in the serpentinites, rodingites, and nephritoids. Copper sulfides, chalcocite and digenite, are present in the serpentinites, whereas gold and silver minerals are absent. Copper impurity is found in antigorite, Cr-spinel, and magnetite (up to 0.1-0.3 wt.%) as well as parkerite (up to 1.2 wt.%) and millerite (up to 7.9 wt.%). A wide variety of native gold and copper minerals has been identified in the rodingites: (1) cuproauride and tetra-auricupride free of or containing silver impurities (0.1 to 1.2 wt.%); (2) electrum of composition Ag0.50-0.49Au0.50-0.51 (650-660%c) intergrown with AuCu, sometimes as exsolution structures; (3) electrum of composition Ag0.70-0.64Au0.30-0.36 (440-510%c), with inclusions of AuCu and copper sulfides (geerite and yarrowite); (4) high-fineness gold (750-990%c) as veinlets in electrum; and (5) native copper. The composition of copper sulfides varies from chalcocite to covellite. Submicron inclusions of hessite Ag2Te were found in chalcocite. The amount of copper, gold, and silver minerals in the nephritoids is much less than that in the rodingites. The nephritoids contain chalcocite, electrum of composition Ag0.64-0.63Au0.36-0.37 (530-540%c), cuproauride, and tetra-auricupride. The detected hypergene minerals are auricuzite, apachite, brochantite, high-fineness gold, native copper, and cuprite. The sequence of mineral formation in the Agardag ore occurrence has been established on the basis of mineral structures and mineral relations in the rodingites and nephritoids. It is proved that Au-Cu-Ag mineralization formed with the participation of Au- and Ag-bearing chloride-free low-sulfur carbon dioxide alkaline fluids in reducing conditions.  相似文献   

4.
The Jílové deposit in the central part of the Bohemian Massif represents a vein to stockwork type of orogenic-type gold deposit. It is hosted by Neoproterozoic rocks of the Jílové Belt and by various magmatic dikes related to the ~ 355 to ~ 335 Ma Central Bohemian Plutonic Complex. The deposit is situated along the terrane boundary of the Teplá Barrandian and Moldanubian units.The deposit offered an exceptional opportunity to trace O, C, S and Sr stable isotope evolution of parent fluids based on combined mineralogical and geochemical study of carbonate, quartz, scheelite, and sulfide minerals, which represent six stages of mineralization, including the gold-bearing event.Stable isotope data and mineral and isotope thermometry indicate gangue and ore mineral formation between ~ 350 °C and < 100 °C, which can be divided into 6 stages. Scheelite-bearing assemblages (stages 2–3) precipitated at 292 ± 8 °C from a fluid with calculated values: δ18OSMOW = + 4.2 ± 0.5‰ and δ13CPDB = − 11 ± 1‰. Gold precipitation (stage 5) probably started at about 300 °C, but the major event probably occurred at 230 ± 30 °C from a fluid with more variable isotope values (δ18OSMOW = + 2.5 to + 5‰ and δ13CPDB = − 9 to − 13.5‰). The carbon speciation was characterized by predomination of dissolved CO2 (H2CO3ap.) in the fluids. Some gold, however, undoubtedly precipitated from bicarbonate dominated fluids even at < 120 °C.Extreme variations in the δ18O values of carbonate minerals, obtained from sampling profiles across individual veins with macroscopic gold, revealed severe thermal gradients during vein formation (~ 50 to ~ 100 °C difference of crystallization temperatures between the vein margin and core).The sulfur stable isotope composition of sulfide minerals indicates the dominant role of sulfur remobilization from Neoproterozoic rocks and stratiform mineralizations of the Jílové Belt by Variscan hydrothermal fluids. Similarly, the Sr-isotope composition of carbonates indicates both relatively primitive (87Sr/86Sr = 0.7055) and more evolved (87Sr/86Sr ~ 0.7090) fluid compositions, probably indicating fluid exchange with the Jílové Belt and the Central Bohemian Plutonic Complex rocks, respectively.Age determination of hydrothermal muscovite (related to stage 2) via 40Ar/39Ar indicated an age of 339.0 ± 1.5 Ma for the quartz veins. The mineralization is essentially coeval with the late intrusive phases of the Central Bohemian Plutonic Complex (i.e. the ultrapotassic suite) and with late-orogenic large-scale tectonic movements at the boundary between the two crustal terranes (Teplá-Barrandian and Moldanubian).Based on evaluation of the available age data on the hydrothermal and magmatic activity within the broader area of the Central Bohemian Plutonic Complex, we suggest two intervals of gold mineralization: 347 to 341 Ma and 340 to 337 Ma. The former interval overlaps with the intrusive activity of the Blatná high-K suite (granodiorite). The associated gold deposits (Mokrsko and Petráčkova hora) exhibit strong affiliation to the intrusion-related-gold-type deposit. The later interval overlaps with the ultrapotassic magmatism and is associated with more or less “classical” orogenic-gold-type deposits (Jílové, Bělčice, Libčice deposits).  相似文献   

5.
Gold and platinum group minerals from the gold placers of the South Urals are studied in order to identify the metal sources. In placers from the Main Uralian fault zone (MUF), the primary gold contains Ag (up to 29 wt.%), Cu (up to 2 wt.%) and Hg (up to 4 wt.%) and its fineness ranges from 538 to 997‰. Tetra-auricupride and cupriferous gold (up to 20 wt.% Cu) are common for the Nizhny Karabash placer of the MUF zone. In the eastern part of the South Urals, the placer gold is mainly characterized by high fineness of 900–1000‰ and low Cu contents (max 1.38 wt.%). Most of the placer gold grains consist of the primary domains, which are rimmed by secondary high-fineness gold with diffuse and clear boundaries. The secondary gold also develops along the shear dislocations of primary gold. Gold contains microinclusions of geerite, balkanite, chalcopyrite, Se-bearing galena, sphalerite, pyrite, pyrrhotite, arsenopyrite and hematite.Twenty four (including five unnamed) platinum group minerals (PGMs) were found in 28 placers; those from the Kialim and Maly Iremel placers of the Miass placer zone were studied in details. In the Kialim placer, ruthenium is most abundant PGM, which hosts microinclusions of isoferroplatinum, ferroan platinum, laurite, cupriferous gold, a mineral similar in composition to tolovkite, heazlewoodite and unnamed RhSbS phase. The osmium contains microinclusions of erlichmanite and laurite. The iridium grains hosts various sulfides and arsenides of platinum group elements (PGEs). The inclusion-free PGMs form Ru compositional trend in contrast to Os–Ru trend of the Ir-depleted inclusion-hosted PGMs. The isoferroplatinum from the Maly Iremel placer hosts laurite, rhodarsenite, bowieite, a mineral similar in composition to miassite and unnamed sulfide of Pt (Pt1.11S2.00) and antimonide of Pd ((Pd2.41Rh0.43Fe0.17)3.01(Sb0.91Te0.09)1.00). Ruthenium is a host to isoferroplatinum, PGE sulfides and arsenides, and heazlewoodite. Osmium contains microinclusions of ferroan platinum; iridium is a host to a mineral similar in composition to hongshiite. Three types of PGM intergrowths were identified in the Maly Iremel samples: (1) the intergrowths of platy grains of ruthenium with isoferroplatinum and a mineral similar in composition to tulameenite; (2) the open-latticework intergrowths of platy crystals of ruthenium with interstitial aggregates made up of gold, isoferroplatinum and a mineral similar in composition to xingzhongite and (3) the intergrowths of osmium and irarsite and iridarsenite, which are developed along cleavage of the osmium grains. Nickel sulfides associated with some PGMs contain Ru (11.32 wt.%) and Rh (2.21 wt.%) in millerite and Ir (31.00 wt.%), Ru (5.81 wt.%) and Rh (2.87 wt.%) in vaesite.The primary metal sources were determined on the basis of the mineral assemblages and composition of minerals, taking into account the nearby mineral deposits and directions of rivers. The rodingite-associated gold, gold-bearing massive sulfide and chromite deposits are major sources of gold and PGMs in placers of the Miass placer zone confined to the MUF structure of the South Urals. In the southern part of this structure, gold was mainly originated from orogenic gold–sulfide deposits associated with volcanic/volcaniclastic rocks and listvenite-associated gold deposits. The placer PGMs were derived from the adjacent ultramafic massifs of ophiolitic origin. The distance between the placers and primary deposits varies from 2 to 5 km (up to 20 km in the extended valley of the Miass River). Usage of ore microinclusions and associated PGMs in study of placer gold is far more advanced than an ordinary consideration of gold composition alone. This approach allowed us to identify the concrete sources for individual placers and to predict some mineralogical findings in already known primary occurrences.  相似文献   

6.
The Fairview and Sheba mines are two of the major gold mines in the Paleoarchean Barberton Greenstone Belt of Southern Africa. At these mines, gold is associated with quartz–carbonate ± rutile veins and occurs both as “invisible” gold finely dispersed in sulfides (primarily pyrite and arsenopyrite), and as visible electrum grains hosted in pyrite. Up to approximately 1000 ppm Au are contained in pyrite, and up to approximately 1700 ppm in arsenopyrite. Mapping of trace element distribution in sulfide minerals using electron microprobe and proton probe techniques revealed multiple events of ore formation and Au mineralisation. At Fairview mine, three stages of pyrite formation were identified, the last of which is associated with arsenopyrite, electrum and other sulfide minerals (sphalerite, chalcopyrite, galena, gersdorffite, and Sb-sulfides). At Sheba mine, pyrite was deposited in two stages, and electrum is associated with the second stage. At both mines, the last stage of sulfide formation is the main stage of Au deposition, and is associated with mobilisation of Au, As, Sb, Cu, Zn, and Ni. The host rock composition seems to have affected the composition of pyrite, since higher Ni and Co concentrations (up to 1.4 and 1.6 wt.%, respectively) have been measured in meta-(ultra)mafic host rocks in comparison with chert and metagreywacke. Arsenopyrite is chemically zoned, and has Sb- and S-rich cores and As- and Ni-rich rims. This zoning indicates variations in fluid compositions (decreasing Sb and increasing Ni), and crystallisation conditions (increasing As content for increasing temperature). Geothermometric estimates based on the As content of arsenopyrite (As ≤ 32 at.%) indicate temperatures up to ~ 420 °C for the crystal rims. Petrographic and cathodoluminescence observations of quartz associated with gold mineralisation show only local brittle deformation, and no plastic deformation. This supports the notion that the ore-transporting veins were emplaced late in the deformation history. Variations of cathodoluminescence of quartz are correlated with changing Al contents (Al ≤ 0.16 wt.%), and can be related to fluctuations in the pH of the mineralising fluids.  相似文献   

7.
The Loulo–Gounkoto complex in the Kédougou–Kéniéba Inlier hosts three multi-million ounce orogenic gold deposits, situated along the Senegal–Mali Shear Zone. This west Malian gold belt represents the largest West African orogenic gold district outside Ghana. The Gounkoto deposit is hosted to the south of the Gara and Yalea gold mines in the Kofi Series metasedimentary rocks. The ore body is structurally controlled and is characterised by sodic and phyllic alteration, As- and Fe-rich ore assemblages, with abundant magnetite, and overall enrichment in Fe–As–Cu–Au–Ag–W–Ni–Co–REE + minor Te–Pb–Se–Cd. Fluid inclusion analysis indicates that the deposit formed at P–T conditions of approximately 1.4 kbar and 340 °C and that two end member fluids were involved in mineralisation: (1) a moderate temperature (315–340 °C), low salinity (< 10 wt.% NaCl equiv.), low density (≤ 1 g·cm− 3), H2O–CO2–NaCl–H2S ± N2–CH4 fluid; (2) a high temperature (up to 445 °C), hypersaline (~ 40 wt.% NaCl equiv.), high density (~ 1.3 g·cm− 3), H2O–CO2–NaCl ± FeCl2 fluid. Partial mixing of these fluids within the Jog Zone at Gounkoto enhanced phase separation in the aqueo-carbonic fluid and acted as a precipitation mechanism for Au. These findings demonstrate the widespread, if heterogeneously distributed, nature of fluid mixing as an ore forming process in the Loulo–Gounkoto complex, operating over at least a 30 km strike length of the shear zone. Stable isotope analyses of ore components at Gounkoto indicate a dominant metamorphic source for H2O, H2S and CO2, and by extension Au. It thus can be reasoned that both the aqueo-carbonic and the hypersaline fluid at Gounkoto are of metamorphic origin and that the high levels of salinity in the brine are likely derived from evaporite dissolution.  相似文献   

8.
The Guelb Moghrein copper–gold deposit in the Islamic Republic of Mauritania reopened in 2006 and has produced copper concentrate and gold since then. The deposit is hosted in Neoarchaean–Palaeoproterozoic Fe–Mg carbonate-dominated metamorphic rocks interpreted as carbonate-facies iron formation. It forms tabular orebodies controlled by shear zones in the hanging wall and footwall of this meta-iron formation. Copper and gold are hosted in a complex sulfide ore in tectonic breccia replacing Fe–Mg carbonate and magnetite. Hydrothermal monazite dates the mineralization at 2492 ± 9 Ma. Two types of aqueous fluid inclusions suggest fluid mixing at 0.75–1.80 kbar and ~ 410 °C as the mineralization and precipitation mechanism, which is temporally coincident with regional retrograde metamorphism at 410 ± 30 °C (garnet-biotite). Distal alteration zones are enriched in K, Rb and Cu, whereas orebodies are depleted in K, Rb, Sr and Ba. The copper–gold mineralization at Guelb Moghrein formed during retrograde shearing in metamorphic rocks and contemporaneous hydrothermal alteration. The stable isotope signature of alteration and ore minerals suggest an external crustal fluid source. Fluids were focused in the reactive and competent meta-iron formation. Potassium alteration, magnetite and copper–gold mineralization suggest an IOCG mineral system akin similar deposits in Australia and Brazil.  相似文献   

9.
The Urals is a complex fold belt, which underwent long geological evolution. The formation of most gold deposits in the Urals is related to the collision stage. In this paper, we review some relatively small listvenite-related gold deposits, which are confined to the large Main Uralian fault zone and some smaller faults within the Magnitogorsk zone. The Mechnikovskoe, Altyn-Tash, and Ganeevskoe deposits are studied in detail in this contribution. They comprise the ore clusters along with other numerous small gold deposits, and constituted the sources for the gold placers exploited in historical time. The gold is hosted by metasomatites (listvenites, beresites) and quartz veins with economic gold grades (up to 20 g/t Au). Listvenites are developed after serpentinites and composed of quartz, fuchsite, and carbonates (magnesite, dolomite) ± albite. Volcanic and volcanoclastic rocks are altered to beresites, consisting of sericite, carbonates (dolomite, ankerite), quartz and albite. Pyrite and chalcopyrite are major ore minerals associated with gold; pyrrhotite, Ni sulfides, galena, sphalerite, arsenopyrite and Au-Ag tellurides are subordinate and rare. Gold in these deposits is mostly high-fineness (>900‰). The lower fineness (∼800‰) is typical of gold in assemblage with polymetallic sulfides and tellurides. The ores have been formed from the NaCl–CO2–H2O ± CH4 fluids of low (∼2 wt% NaCl-equiv.) to moderate (8–16 wt% NaCl-equiv.) salinity at temperatures of 210–330 °C. The oxygen isotopic composition of quartz (δ18O) varies from 14.7 to 15.4‰ (Mechnikovskoe deposit), 13.2 to 13.6‰ (Altyn-Tash deposit) and 12.0 to 12.7‰ (Ganeevskoe deposit). The oxygen isotopic composition of albite from altered rocks of the Ganeevskoe deposit is 10.1‰. The calculated δ18OH2O values of the fluid in equilibrium with quartz are in a range of 5.7–6.3, 4.2–4.6 and 6.3–6.7‰ respectively, and most likely indicate a magmatic fluid source.  相似文献   

10.
The giant Jianchaling gold deposit is located in the Shaanxi Province, China. The mineralization is hosted by WNW-trending faults in the Mianxian-Lueyang-Yangpingguan (MLY) area. The mineralization can be divided into three stages based on mineralogical assemblages and crosscutting relationships of mineralized quartz veins. These stages, from early to late, are characterized by the mineral assemblage of: (1) quartz – coarse-grained pyrite – pyrrhotite – pentlandite – dolomite; (2) quartz – pyrite – gold – sphalerite – galena – carbonate – arsenopyrite – fuchsite; and (3) dolomite – calcite – quartz – fine-grained pyrite – realgar – orpiment.Three types of fluid inclusions have been recognized in this study based on petrographic and microthermometric measurements, including pure CO2 and/or CH4 (PC-type), NaCl-H2O (W-type), and NaCl-CO2-H2O (C-type) fluid inclusions. These fluid inclusion types are present in quartz from the Stage 1 and 2 assemblages, whereas the Stage 3 quartz only contains W-type fluid inclusions. The Stage 2 assemblage is associated with the mineralization at the Jianchaling deposit. Fluid inclusions of Stage 1 quartz homogenize mainly between 250° and 360 °C, with salinities up to 15.6 wt.% NaCl equiv., whereas the Stage 3 dolomite with homogenization temperatures of 160° – 220 °C and salinities of 1.1–7.4 wt.% NaCl equiv. This indicates that the ore fluid system evolved from CO2-rich, probably metamorphic hydrothermal to CO2-poor, meteoric fluid. All three types of fluid inclusions can be observed in the Stage 2 quartz, suggesting that this heterogeneous association was trapped from a boiling fluid system. These inclusions homogenized at temperatures of 200°–250 °C and salinities of 1.2–12.4 wt.% NaCl equiv. The estimated trapping pressures of the fluid inclusions are between 117 and 354 MPa in Stage 1, suggesting an alternating lithostatic–hydrostatic fluid system, which was controlled by a fault-valve at the depth of ~ 12 km.Two fuchsite samples collected from the Stage 2 polymetallic-quartz veins yielded well-defined 40Ar/39Ar isotopic plateau ages of 197 ± 2 and 194 ± 2 Ma, and 39Ar/36Ar-40Ar/36Ar normal isochrones of 198 ± 2 and 199 ± 2 Ma. This indicates that the mineralization at Jianchaling is Early Jurassic (ca. 198 Ma) in age. We propose that Jianchaling is an orogenic gold deposit, and formed during continental collision related to the northward subduction of the Mian-Lue oceanic plate during the Early Jurassic. We also conclude that the beginning of the continental collision between the Yangtze and the North China Cratons took place around 200 Ma.  相似文献   

11.
The Song Hien rift basin is an important metallogenic area in NE Vietnam. This domain consists mainly of Triassic sulfide-rich black shale beds, which play a role as a sedimentary host for various mineral systems such as antimony, mercury and gold-sulfide deposits. Most of gold deposits are hosted in carbonaceous sedimentary rocks, however some deposits, which have similar characteristics, are hosted in fine-grained mafic magmatic rocks. An Ar-Ar isotopic dating of hydrothermal sericite from the sedimentary hosted Bo Va and Khung Khoang gold deposits and intrusion hosted orogenic Hat Han gold deposit yields plateau ages of 184.8 ± 2.1 Ma, 211.63 ± 2.3 Ma, and 209.12 ± 2.3 Ma, respectively. The obtained Ar-Ar ages convincingly show that the orogenic gold deposits in the Song Hien domain were formed in Late Triassic to Early Jurassic, while the age of the Bo Va deposit is at least older than 184.8 ± 2.1 Ma. Loss of argon by volume diffusion, supported by previously reported mineralogical and isotopic features of the Bo Va deposit may suggest that the Jurassic-Cretaceous (Yanshanian) tectonothermal events overprinted some deposits in the Song Hien domain. Formation of gold deposits in the Song Hien domain is linked to the same tectonic event as the Carlin-like gold deposits in SW China and is associated with an extensional tectonic regime that followed continental collision between the Indochina and South China Blocks. The similarity in geology setting and mineral composition of gold deposits of the Song Hien domain and the Golden Triangle region, as well as timing and kinematics of deformation, magmatic features, and stratigraphic sequence and bulk architecture, lead to conclusion that NE Vietnam and SW China is a single metallogenic zone. The study of gold deposits in Vietnam will provide a new data on the metallogenic history of this important part of SE Asia.  相似文献   

12.
Southern Peru contains important epithermal Au–Ag (± base metals) deposits, such as Canahuire, Tucari, Santa Rosa, Caylloma, Shila and Paula. The Chapi Chiara gold prospect is located in this region and is part of a paleo-stratovolcano of the Upper Miocene–Pliocene. The hydrothermal alteration of the prospect was characterized based on spectroradiometric data, geochemistry and petrography. The mineralogical data, interpreted based on reflectance spectroscopy, were spatialized using the sequential indicator simulation technique for producing probabilistic maps of alteration. The inner part of the paleo-stratovolcano (SW sector) is marked by three main cores of advanced argillic alteration (AAA) (quartz–alunite supergroup minerals–kaolinite–dickite ± topaz ± pyrophyllite ± diaspore) associated with topographic highs. The AAA1 core is surrounded by argillic alteration (quartz–illite–paragonitic illite–smectite ± pyrite) and propylitic alteration (quartz–plagioclase–chlorite–calcite–epidote–smectite ± kaolinite ± pyrite ± chalcopyrite ± magnetite). The central sector of the prospect, situated in the NE flank of the paleo-stratovolcano, is characterized by hydrothermal breccias structured towards N65E. The main mineral phases comprise quartz and abundant pyrite, sometimes with traces of As. Anomalous geochemical values of Ag, As, Bi, Hg, Se, Sb and Te coincide with high gold contents in this sector of the prospect. Jarosite and goethite are evidence of a subsequent supergene event. Based on the mineralogical characterization, we conclude the existence of a high sulfidation epithermal system in Chapi Chiara. Hypogene minerals of higher temperature in the SW sector of the prospect, such as diaspore, pyrophyllite and topaz in the AAA zone, and epidote in the propylitic alteration zone, can reveal that the system is currently in a relatively deep erosion level, suggesting its proximity in relation to the interface between a deep epithermal system and a mesothermal system.  相似文献   

13.
The Dongping gold deposit hosted in syenites is one of the largest hydrothermal gold deposits in China and composed of ore veins in the upper parts and altered zones in the lower parts of the ore bodies. Pervasive potassic alteration and silicification overprint the wall rocks of the ore deposit. The alteration minerals include orthoclase, microcline, perthite, quartz, sericite, epidote, calcite, hematite and pyrite, with the quartz, pyrite and hematite assemblages closely associated with gold mineralization. The phases of hydrothermal alteration include: (i) potassic alteration, (ii) potassic alteration - silicification, (iii) silicification - epidotization - hematitization, (iv) silicification - sericitization - pyritization and (v) carbonation. Mass-balance calculations in potassic altered and silicified rocks reveal the gain of K2O, Na2O, SiO2, HFSEs and transition elements (TEs) and the loss of REEs. Most major elements were affected by intense mineral reactions, and the REE patterns of the ore are consistent with those of the syenites. Gold, silver and tellurium show positive correlation and close association with silicification. Fluid inclusion homogenization temperatures in quartz veins range from 154 °C to 382 °C (peak at 275 °C–325 °C), with salinities of 4–9 wt.% NaCl equiv. At temperatures of 325 °C the fluid is estimated to have pH = 3.70–5.86, log fO2 = − 32.4 to − 28.1, with Au and Te transported as Au (HS)2− and Te22 − complexes. The ore forming fluids evolved from high pH and fO2 at moderate temperatures into moderate-low pH, low fO2 and low temperature conditions. The fineness of the precipitated native gold and the contents of the oxide minerals (e.g., magnetite and hematite) decreased, followed by precipitation of Au- and Ag-bearing tellurides. The hydrothermal system was derived from an alkaline magma and the deposit is defined as an alkaline rock-hosted hydrothermal gold deposit.  相似文献   

14.
This work defines the Vilalba gold district, a new gold region in the NW of Spain comprising three mineralized areas (Castro de Rei, Valiña–Azúmara and Arcos) and two different types of mineralization: 1) W–Au skarn in Castro de Rei, and 2) Au–As (Ag–Pb–Zn–Cu–Sb) vein/disseminated mineralization in Valiña–Azúmara and Arcos. Mineralization is mainly hosted by impure limestone and black slates (lower Cambrian) and spatially related to Variscan and Late-Variscan structures. Rhyolite dikes occur in Arcos (299 ± 6 Ma) and Castro de Rei, both consisting of peraluminous, high-potassium and calc-alkaline rocks. These dikes represent the fractionated expression of unexposed post-tectonic granitoids located at depth. The Castro de Rei area exhibits a contact aureole with biotite ± cordierite and calc-silicate hornfels. Prograde skarn consists of garnet, pyroxene, quartz, wollastonite and scheelite. The retrograde alteration took place in two stages and mainly consists of amphibole, epidote, zoisite, quartz, calcite, chlorite and sulfides. Gold mineralization in the skarn occurs as invisible gold in sulfoarsenides and as electrum related to Bi–Te–S minerals. The mineralization of Valiña–Azúmara and Arcos comprises two stages. The first consists of As-rich pyrite and arsenopyrite with invisible gold. The second stage mainly consists of base metal sulfides and Ag–Pb–Zn–Cu–Sb sulfosalts.Hydrothermal fluids involved in the skarn formation are low salinity (up to 6.6 wt.% NaCl eq.) aqueous carbonic fluids (H2O + CO2 ± CH4 ± N2) evolving into aqueous fluids during the last stage of gold mineralization. Stable isotope geochemistry indicates the importance of a magmatic fluid in the early stages (δ18OSMOW from 7.5 to 11‰; δ34SCDT from 2.7 to 5.9‰) that evolved through interaction with host-rocks and mixing with metamorphic and/or meteoric fluids. The δ34SCDT values (7.8–10.9‰) of second retrograde stage sulfides suggest the incorporation of 34S-enriched from host-rocks. In Valiña–Azúmara and Arcos, the fluid inclusion and isotope studies indicate similar hydrothermal fluids to those associated with the second retrograde skarn stage. Taking into account the fluid inclusion study and mineral geothermometry, an attempt was made to determine the P–T conditions of ore formation. The prograde skarn of Castro de Rei formed at temperatures and pressures ranging from 520 to 560 °C and from 1.7 to 2.5 kb. The mineralization of Valiña–Azúmara formed at minimum P–T conditions of 1.7 kb and 355 °C. The estimated temperatures for the Arcos mineralization are similar to those of Valiña–Azúmara (up to 383 °C) but at lower pressures.We propose the model of intrusion related gold systems (IRGSs) to explain the mineralizations of the Vilalba gold district. In this model, the Castro de Rei skarn and the Valiña–Azúmara mineralization represent a proximal and a distal deposit, respectively, relative to an unexposed granitoid situated at depth. We also consider Arcos as a distal deposit in relation to another unexposed granitoid located further south in the district.  相似文献   

15.
《Ore Geology Reviews》2010,37(4):333-349
Gold mineralization at Jonnagiri, Dharwar Craton, southern India, is hosted in laminated quartz veins within sheared granodiorite that occur with other rock units, typical of Archean greenstone–granite ensembles. The proximal alteration assemblage comprises of muscovite, plagioclase, and chlorite with minor biotite (and carbonate), which is distinctive of low- to mid-greenschist facies. The laminated quartz veins that constitute the inner alteration zone, contain muscovite, chlorite, albite and calcite. Using various calibrations, chlorite compositions in the inner and proximal zones yielded comparable temperature ranges of 263 to 323 °C and 268 to 324 °C, respectively. Gold occurs in the laminated quartz veins both as free-milling native metal and enclosed within sulfides. Fluid inclusion microthermometry and Raman spectroscopy in quartz veins within the sheared granodiorite in the proximal zone and laminated auriferous quartz veins in inner zone reveal the existence of a metamorphogenic aqueous–gaseous (H2O–CO2–CH4 + salt) fluid that underwent phase separation and gave rise to gaseous (CO2–CH4), low saline (~ 5 wt.% NaCl equiv.) aqueous fluids. Quartz veins within the mylonitized granodiorites and the laminated veins show broad similarity in fluid compositions and P–T regime. Although the estimated P–T range (1.39 to 2.57 kbar at 263 to 323 °C) compare well with the published P–T values of other orogenic gold deposits in general, considerable pressure fluctuation characterize gold mineralization at Jonnagiri. Factors such as fluid phase separation and fluid–rock interaction, along with a decrease in f(O2), were collectively responsible for gold precipitation, from an initial low-saline metamorphogenic fluid. Comparison of the Jonnagiri ore fluid with other lode gold deposits in the Dharwar Craton and major granitoid-hosted gold deposits in Australia and Canada confirms that fluids of low saline aqueous–carbonic composition with metamorphic parentage played the most dominant role in the formation of the Archean lode gold systems.  相似文献   

16.
《Gondwana Research》2009,15(4):644-662
The integration of new and published geochronologic data with structural, magmatic/anatectic and pressure–temperature (P–T) process information allow the recognition of high-grade polymetamorphic granulites and associated high-grade shear zones in the Central Zone (CZ) of the Limpopo high-grade terrain in South Africa. Together, these two important features reflect a major high-grade D3/M3 event at ~ 2.02 Ga that overprinted the > 2.63 Ga high-grade Neoarchaean D2/M2 event, characterized by SW-plunging sheath folds. These major D2/M2 folds developed before ~ 2.63 Ga based on U–Pb zircon age data for precursors to leucocratic anatectic gneisses that cut the high-grade gneissic fabric. The D3/M3 shear event is accurately dated by U–Pb monazite (2017.1 ± 2.8 Ma) and PbSL garnet (2023 ± 11 Ma) age data obtained from syntectonic anatectic material, and from sheared metapelitic gneisses that were completely reworked during the high-grade shear event. The shear event was preceded by isobaric heating (P = ~ 6 kbar and T = ~ 670–780 °C), which resulted in the widespread formation of polymetamorphic granulites. Many efforts to date high-grade gneisses from the CZ using PbSL garnet dating resulted in a large spread of ages (~ 2.0–2.6 Ga) that reflect the polymetamorphic nature of these complexly deformed high-grade rocks.  相似文献   

17.
Flow-through and batch-leaching experiments combining mineralogical, chemical and K–Ar isotopic analyses of mica separates from a mylonitic sample of the Tyndrum faulting system in Scotland (U.K.) were conducted to evaluate and simulate the natural interaction with H2SO4-loaded river water at pHs of 3–4. The flow-through experiments with H2SO4-loaded and pure deionized water completed by a batch-leaching experiment with 1 M HCl at room temperature had varied effects on soluble mineral phases, such as Fe-sulfates and Ca/Mg-carbonates, that were present in the varied mica size fractions, but none caused the mineralogical and K–Ar characteristics of the mica to differ from separates of the natural environment.Despite the limited number of K–Ar ages, size fractionation of the mylonitic mica identified two generations of mica with different REE patterns. The coarser (2–8 μm) fraction yielded a high La/Yb ratio of 4.3 and crystallized at 359 ± 6 Ma at a temperature of 250–300 °C, probably during a major tectonic-thermal activity. The smaller (< 0.5 μm) fraction yielded a La/Yb ratio of 2.1, a younger K–Ar age at 315 ± 5 Ma and a lower crystallization temperature of about 200 °C.  相似文献   

18.
Summary This paper addresses Ag-sulfotellurides occurring in volcanic-hosted massive sulfide deposits of the Southern Urals. Cervelleite-like minerals were identified in ores from the Gayskoe, Yaman-Kasy, Severo-Uvaryazhskoe, Tash-Tau, and Babaryk deposits, where they occur in ores containing chalcopyrite, galena, sphalerite, tennantite ± bornite. Other Ag- and Te-bearing minerals (electrum, hessite, stromeyerite and Ag-bearing chalcocite) are present in the association. A benleonardite-like mineral associated with sylvanite and native tellurium was found as a metastable phase in paleohydrothermal tubes relics from the Yaman-Kasy deposit. Formation of the sulfotellurides indicates relative low fTe2 in the hydrothermal systems, insufficient for formation of most S-free tellurides. The significant Cu enrichment in cervelleite relates to the association with bornite. Broad variations in composition and physical properties of cervelleite-like sulfotellurides allow the supposition of the presence of several, as yet unnamed mineral species, which can be distinguished by Cu contents, Te/S ratios, and presumably by crystal structure.  相似文献   

19.
The Engineer Mine epithermal precious metal deposit in British Columbia, Canada, is related to Eocene Sloko-Skukum-Group (SSG) volcanism and, according to previous studies, contains roscoelite in intimate association with electrum. Roscoelite, a vanadian mica, is considered characteristic of low-sulfidation epithermal deposits related to alkaline magmatism. This contradicts the fact that the SSG volcanics are subalkaline. In order to address this ambiguity and to accurately classify the style of epithermal mineralization at the Engineer Mine we conducted detailed petrographic, mineralogical, geochronological, fluid inclusion, and stable isotope studies.The principal ore assemblage of the Engineer Mine epithermal veins precipitated in response to boiling during a hydrothermal event at 49.90 Ma ± 0.25 Ma. During this event electrum, arsenopyrite, pyrite ± chalcopyrite ± sphalerite ± löllingite ± tetrahedrite-group phases ± allargentum ± acanthite ± hessite ± dyscrasite ± stibarsen ± galena and an unidentified Ag-rich phase were deposited in conjunction with amorphous silica, platy and rhombic calcite, K-feldspar, and vanadian illite. Fluid inclusion and stable isotope data suggest that the ore-forming fluid was boiling at ∼220 °C during vein mineralization and had an isotopic composition derived from local meteoric water. Based on these results the Engineer Mine is classified as an epithermal low-sulfidation deposit, which shares similarities with alkaline and subalkaline epithermal low-sulfidation deposits. This is attributed to the fact that the SSG volcanic rocks are borderline subalkaline to alkaline in character and that the sedimentary host rocks are vanadium-bearing. These sedimentary rocks contributed the bulk of the vanadium to the Engineer Mine epithermal system. The presence of roscoelite at the Engineer Mine could not be confirmed during this study. The mica referred to as roscoelite in previous publications instead is vanadian illite. To our knowledge the only alkaline low-sulfidation epithermal precious metal deposit that contains V-mica which exclusively qualifies as true roscoelite is the Porgera deposit, Papua New Guinea.  相似文献   

20.
In this study we experimentally determine phlogopite/melt partition coefficients of Ra and other trace elements in a lamproitic system. This work was achieved using an analytical technique (LA-ICP-MS) with low detection limits (~ 0.01 fg) permitting the measurement of the very low Ra concentrations feasible in experiments (~ 1 ppb). DRaphlogopite/melt was determined to 2.28 ± 0.44 and 2.84 ± 0.47 in two experiments, the ratio DRa/DBa is around 1.6. The compatibility of Ra in phlogopite results from an ionic radius being close to the apex of the lattice strain parabola for earth alkalis in the large XII-coordinated interlayer site of phlogopite. A re-evaluation of DRa and DRa/DBa for magmatic minerals containing appreciable Ra, yields DRamineral/melt ranging from ~ 2.6 for phlogopite down to 2–3 ? 10? 5 for pyroxenes, and DRa/DBamineral/melt from ~ 4 for leucite to 2 ? 10? 2 for orthopyroxene. The influence of melt composition on DRa/DBa is less than 10%. All investigated minerals have different DRa/DBa, strongly fractionating Ra from Ba. Thus, for magmatic systems, (226Ra)/Ba in the various minerals is not constant, these minerals do not form a straight line in the (226Ra)/Ba–(230Th)/Ba system at the time of crystallization and thus, there is no (226Ra)/Ba–(230Th)/Ba isochron at t0. 226Ra–230Th–Ba mineral dating is thus applicable only to model ages calculated from mineral–glass pairs with known DRa.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号