共查询到20条相似文献，搜索用时 62 毫秒
1.
South China Block (SCB) is the broad area including the Yangtze Craton in the northwest and Huanan Orogen in the southeast. It is an important epithermal metallogenic province in China, containing at least 1 high-sulfidation (HS) and 42 low-sulfidation (LS) Au-Ag ± Cu ± Pb-Zn ± Sb epithermal deposits. Porphyry-type mineralization was recognized in four of the LS deposits, and thus they were regarded as LS–P type. These 43 deposits are mainly located in: (1) the Lower Yangtze River Belt and (2) the Northeastern Jiangnan Orogenic Belt in the Yangtze Craton, (3) the Wuyi-Yunkai Orogenic Belt and (4) the Southeast Coastal Volcanic Belt in the Huanan Orogen. They are mostly located in Mesozoic volcanic basins, especially where the regional faults and their subsidiaries occurred. The host rocks include Jurassic–Cretaceous volcanic-sedimentary rocks, coeval or slightly older subvolcanic, granitoids and breccias, and metamorphic basement rocks. The alteration of the HS epithermal deposit (Zijinshan Cu-Au) zoned from silicic (vuggy quartz), through alunite, to dickite and phyllic alteration zones, from the ore veins outwards. The alteration of the LS deposits is zoned from adularia-chalcedony-bladed calcite (or quartz pseudomorphs after bladed calcite) in ore veins to distal illite-sericite-chlorite-kaolinite assemblages. For those LS–P systems, besides the dominated LS alteration assemblages, phyllic and potassium silicate alteration related to porphyry mineralization were identified. Acid leaching textures and vein, stockwork and breccia structures are common in HS deposit, while the LS epithermal deposits are characterized by open-space filling, crustifications, colloform banding and comb structures. The ore-forming fluids are low-temperature, low-salinity meteoric water-dominated in most epithermal deposits in SCB, with variable input of magmatic water. The ore components were derived from both the deep magma and host rocks, and transported upwards or laterally and precipitated in the fracture systems by fluid boiling, mixing and cooling. Most of the epithermal deposits are formed at depth of < 1.5 km and < 300 °C, with few exceptions containing porphyry-type mineralization, such as the Zhilingtou, Yinshan and Longtoushan deposits. Deep drilling is suggested in these deposits as more epithermal and/or porphyry mineralization could be expected. The mineral systems were formed in Early Yanshanian (180–130 Ma) and Late Yanshanian (120–90 Ma) periods. The Early Yanshanian epithermal ore systems are mainly located in a series of E–W-trending metallogenic belts to the west of the Lishui–Haifeng Fault, which were formed in a syn- or post-collision tectonic setting by the collision between the SCB and its surrounding plates. The Late Yanshanian epithermal deposits are mainly located in Southeast Coastal Volcanic Belt, genetically related to the westward subduction of the paleo-Pacific plate. 相似文献
2.
The large Yueyang Ag-Au-Cu deposit is commonly regarded as a low-sulfidation epithermal deposit in the Zijinshan orefield, Fujian Province, southeastern China. The Ag-Ag-Cu orebodies hosted in the Zijinshan granitic batholith are mainly stratoid and lens in shape, and controlled by a series of NW-trending listric faults with shallow dip angles. Four mineralization stages are recognized on the basis of mineral assemblage, ore fabrics, and crosscutting relationships of the ore veins, namely: pre-ore (pyrite + sericite + quartz ± chlorite), main Cu (chalcopyrite + pyrite + sericite + quartz ± bornite), main Ag-Au (Ag and Au minerals + pyrite + quartz + adularia ± calcite ± apatite ± chalcopyrite ± galena ± sphalerite) and post-ore (quartz ± chalcedony ± calcite) stages. Fluid inclusions (FIs) in the deposit include aqueous liquid-rich (WL-), aqueous vapor-rich (WV-), and minor carbonic (C-) and daughter mineral-bearing (S-) type ones. WL-subtype is the main inclusion type in the Yueyang deposit, accounting for more than 90% in proportion in each stage. Minor WV-subtype inclusions occur in both the main Cu and Ag stages, while the C-type and S-type ones are only observed in the main Cu stage. Fluid inclusion and H-O isotope study indicated that the ore-forming fluid of the main Cu stage is primarily magmatic vapor, which further underwent fluid boiling and mixing with meteoric water, while the ore-forming fluid of the main Ag stage is meteoric water-dominated, and the precipitation of silver and gold was mainly resulted from fluid boiling and the precipitation of other sulfides. On the basis of the aforementioned geological, fluid inclusion and stable isotope studies, we proposed a two-stage model for the Yueyang deposit, including a magmatic vapor-related porphyry type Cu mineralization and meteoric water-related low-sulfidation epithermal Ag-Au-Cu mineralization, although the porphyry Cu mineralization is very limited in scale. The mineralization and exhumation depths of the Yueyang deposit are estimated to be 448‒527 m and 18‒97 m, respectively. By comparison with the exhumation depths of other deposits in the Zijinshan orefield, it is suggested that more epithermal deposits could be found in the southwest of the orefield due to less uplift and exhumation therein. 相似文献
3.
The Murgul (Artvin, NE Turkey) massive sulfide deposit is hosted dominantly by Late Cretaceous calc-alkaline to transitional felsic volcanics. The footwall rocks are represented by dacitic flows and pyroclastics, whereas the hanging wall rocks consist of epiclastic rocks, chemical exhalative rocks, gypsum-bearing vitric tuff, purple vitric tuff and dacitic flows. Multi-element variation diagrams of the hanging wall and footwall rocks exhibit similar patterns with considerable enrichment in K, Rb and Ba and depletion in Nb, Sr, Ti and P. The chondrite-normalized rare earth element (REEs) patterns of all the rocks are characterized by pronounced positive/negative Eu anomalies as a result of different degrees of hydrothermal alteration and the semi-protected effects of plagioclase fractionation.Mineralogical results suggest illite, illite/smectite + chlorite ± kaolinite and chlorite in the footwall rocks and illite ± smectite ± kaolinite and chlorite ± illite in the hanging wall rocks. Overall, the alteration pattern is represented by silica, sericite, chlorite and chlorite–carbonate–epidote–sericite and quartz/albite zones. Increments of Ishikawa alteration indexes, resulting from gains in K2O and losses in Na2O and the chlorite–carbonate–pyrite index towards to the center of the stringer zone, indicate the inner parts of the alteration zones. Calculations of the changes in the chemical mass imply a general volume increase in the footwall rocks. Abnormal volume increases are explained by silica and iron enrichments and a total depletion of alkalis in silica zone. Relative K increments are linked to the sericitization of plagioclase and glass shards and the formation of illite/smectite in the sericite zone. In addition, Fe enrichment is always met by pyrite formation accompanied by quartz and chlorite. Illite is favored over chlorite, smectite and kaolinite in the central part of the ore body due to the increase in the (Al + K)/(Na + Ca) ratio. Although the REEs were enriched in the silicification zone, light REEs show depletion in the silicification zone and enrichment in the other zones in contrast to the heavy REEs' behavior. Hydrothermal alteration within the hanging wall rocks, apart from the gypsum-bearing vitric tuffs, is primarily controlled by chloritization with proportional Fe and Mg enrichments and sericitization.The δ18O and δD values of clay minerals systematically change with increasing formation temperature from 6.6 to 8.7‰ and − 42 to − 50‰ for illites, and 8.6 and − 52‰ for chlorite, respectively. The O- and H-stable isotopic data imply that hydrothermal-alteration processes occurred at 253–332 °C for illites and 136 °C for chlorite with a temperature decrease outward from the center of the deposit. The positive δ34S values (20.3 to 20.4‰) for gypsum suggest contributions from seawater sulfate reduced by Fe-oxide/-hydroxide phases within altered volcanic units. Thus, the hydrothermal alteration possibly formed via a dissolution–precipitation mechanism that operated under acidic conditions. The K–Ar dating (73–62 Ma) of the illites indicates an illitization process from the Maastrichtian to Early Danian period. 相似文献
4.
The newly discovered Chalukou giant porphyry Mo deposit, located in the northern Great Xing’an Range, is the biggest Mo deposit in northeast China. The Chalukou Mo deposit occurs in an intermediate-acid complex and Jurassic volcano-sedimentary rocks, of which granite porphyry, quartz porphyry, and fine-grained granite are closely associated with Mo mineralization. However, the ages of the igneous rocks and Mo mineralization are poorly constrained. In this paper, we report precise in situ LA-ICP-MS zircon U–Pb dates for the monzogranite, granite porphyry, quartz porphyry, fine grained granite, rhyolite porphyry, diorite porphyry, and andesite porphyry in the Chalukou deposit, corresponding with ages of 162 ± 2 Ma, 149 ± 5 Ma, 148 ± 2 Ma, 148 ± 1 Ma, 137 ± 3 Ma, 133 ± 2 Ma, and 132 ± 2 Ma, respectively. Analyses of six molybdenite samples yielded a Re–Os isochron age of 148 ± 1 Ma. These data indicate that the sequence of the magmatic activity in the Chalukou deposit ranges from Jurassic volcano-sedimentary rocks and monzogranite, through late Jurassic granite porphyry, quartz porphyry, and fine-grained granite, to early Cretaceous rhyolite porphyry, diorite porphyry, and andesite porphyry. The Chalukou porphyry Mo deposit was formed in the late Jurassic, and occurred in a transitional tectonic setting from compression to extension caused by subduction of the Paleo-Pacific oceanic plate. 相似文献
5.
Southern Peru contains important epithermal Au–Ag (± base metals) deposits, such as Canahuire, Tucari, Santa Rosa, Caylloma, Shila and Paula. The Chapi Chiara gold prospect is located in this region and is part of a paleo-stratovolcano of the Upper Miocene–Pliocene. The hydrothermal alteration of the prospect was characterized based on spectroradiometric data, geochemistry and petrography. The mineralogical data, interpreted based on reflectance spectroscopy, were spatialized using the sequential indicator simulation technique for producing probabilistic maps of alteration. The inner part of the paleo-stratovolcano (SW sector) is marked by three main cores of advanced argillic alteration (AAA) (quartz–alunite supergroup minerals–kaolinite–dickite ± topaz ± pyrophyllite ± diaspore) associated with topographic highs. The AAA1 core is surrounded by argillic alteration (quartz–illite–paragonitic illite–smectite ± pyrite) and propylitic alteration (quartz–plagioclase–chlorite–calcite–epidote–smectite ± kaolinite ± pyrite ± chalcopyrite ± magnetite). The central sector of the prospect, situated in the NE flank of the paleo-stratovolcano, is characterized by hydrothermal breccias structured towards N65E. The main mineral phases comprise quartz and abundant pyrite, sometimes with traces of As. Anomalous geochemical values of Ag, As, Bi, Hg, Se, Sb and Te coincide with high gold contents in this sector of the prospect. Jarosite and goethite are evidence of a subsequent supergene event. Based on the mineralogical characterization, we conclude the existence of a high sulfidation epithermal system in Chapi Chiara. Hypogene minerals of higher temperature in the SW sector of the prospect, such as diaspore, pyrophyllite and topaz in the AAA zone, and epidote in the propylitic alteration zone, can reveal that the system is currently in a relatively deep erosion level, suggesting its proximity in relation to the interface between a deep epithermal system and a mesothermal system. 相似文献
6.
The Tasiast gold deposits are hosted within Mesoarchean rocks of the Aouéouat greenstone belt, Mauritania. The Tasiast Mine consists of two deposits hosted within distinctly different rock types, both situated within the hanging wall of the west-vergent Tasiast thrust. The Piment deposits are hosted within metasedimentary rocks including metaturbidites and banded iron formation where the main mineral association consists of magnetite-quartz-pyrrhotite ± actinolite ± garnet ± biotite. Gold is associated with silica flooding and sulphide replacement of magnetite in the turbidites and in the banded iron formation units. The West Branch deposit is hosted within meta-igneous rocks, mainly diorites and quartz diorites that lie stratigraphically below host rocks of the Piment deposits. Most of the gold mineralisation at West Branch is hosted by quartz–carbonate veins within the sheared and hydrothermally altered meta-diorites that constitute the Greenschist Zone. At Tasiast, gold mineralisation has been defined over a strike length > 10 km and to vertical depths of 740 m. All of the significant mineralised bodies defined to date dip moderately to steeply (45° to 70°) to the east and have a south–southeasterly plunge. Gold deposits on the Tasiast trend are associated with second order shear zones that are splays cutting the hanging wall block of the Tasiast thrust. An age of 2839 ± 36 Ma obtained from the hydrothermal overgrowth on zircons from a quartz vein is interpreted to represent the age of mineralisation. 相似文献
7.
The Ciemas gold mining area is located in the Sunda arc volcanic rock belt, West Java, Indonesia. Ore bodies are associated with Miocene andesite, dacite and quartz diorite porphyrite. To constrain ore genesis and mineralization significance, a detailed study was recently conducted examining these deposits, which included detailed field observation, petrographic study, petrochemistry, sulfur isotope analyses, zircon U–Pb dating, and fluid inclusion analysis. The results include the following findings. 1) Ore types have been identified as porphyry, a quartz–sulfide vein, and structure-controlled alteration rocks. 2) In host rocks, zircon LA–ICP-MS U–Pb dating of quartz diorite porphyrite, amphibole tuff breccia and andesite yield ages of 17.1 ± 0.4 Ma, 17.1 ± 0.4 Ma and 17.5 ± 0.3 Ma, respectively. 3) Fluid inclusions in the quartz from ore are given priority to liquid and gas–liquid phases, and their components are of the NaCl–H2O system with homogenization temperatures of 240–320 °C, salinities of 14–17%, densities of 0.85–0.95 g/cm3, and fluid pressure values between 4.1 and 46.8 MPa, corresponding to metallogenic depths from 150 to 1730 m. Fluid characteristics are identified as similar to those of high sulfur epithermal deposits. 4) The sulfur isotopic compositions are notably uniform, the δ34S values of wall rocks range from 3.71 to 3.85‰, and the δ34S values of ores vary from 4.90‰ to 6.55‰. The sulfur isotopic composition of ores is similar to that of the wall rocks, indicating a mixed origin of mantle with a sedimentary basement. 5) The trace element patterns of different ore types are similar, which indicates that they originate from the same source. Au deposits primarily occurred during the late magmatic activity. Finally, we have set up the regional metallogenic model, confirming that this gold deposit in the Sunda arc volcanic rock belt belongs to a metallogenic system from porphyry to epithermal type. 相似文献
8.
《Precambrian Research》2004,128(1-2):105-142
The Kanowna Belle Gold Mine is a Late Archaean orogenic lode-gold deposit hosted by felsic volcaniclastic and intrusive rocks (porphyries) of the Kalgoorlie Terrane, Western Australia. Rare gold occurs in fragments of veins and alteration that form clasts within the Black Flag Group volcaniclastic rocks at the Kanowna Belle mine, indicating that epithermal gold mineralisation accompanied Black Flag Group volcanism. The SHRIMP U–Pb zircon age of the volcaniclastic unit is 2668±9 Ma, and xenocrystic zircons with ∼2.68, 2.70 and 2.71 Ga age groupings are common. The Black Flag Group rocks are faulted by a D1 thrust, and ∼2670 Ma is thus an older limit for regional D1 deformation. Although SHRIMP U–Pb zircon ages of felsic porphyries commonly give the best constraints on the timing of deformation and structurally controlled gold mineralisation, the data are complex and dates from single samples can be ambiguous. Four Porphyry samples from the Kanowna Belle Gold Mine were analysed. Backscattered electron and cathodoluminescence imaging show that most magmatic zircon in the porphyries is either high-U and metamict, or restricted to rims on older xenocrysts that are too narrow to be dated by SHRIMP. Some porphyries appear to have been saturated with zircon at source and contain only xenocrystic zircons. Zircons that are interpreted to be magmatic in a sample of the mineralised Kanowna Belle Porphyry gives a mean age of 2655±6 Ma. The Kanowna Belle Porphyry is cross cut by regional D2 fabrics and ∼2655 Ma is thus the maximum age for regional D2 deformation. This is a maximum age for epigenetic lode-gold mineralisation. The age of resetting of high-U zircon grains (2.63 Ga) and the age of ore-related Pb–Pb galenas (2.63 Ga) serves as an approximate date for lode-gold mineralisation. If the complex zircon history of the felsic porphyries at Kanowna Belle is typical of this suite throughout the Eastern Goldfields Province, it is clear that existing single zircon dates from this Province require reevaluation, backed up by careful backscattered and cathodoluminescence imaging and textural studies. 相似文献
9.
Hiroyuki MAEDA 《Resource Geology》1998,48(2):105-116
Abstract: Characterization of Neogene magmatism in the Ryuo mine area in the Kitami metallogenic province was carried out on the basis of K-Ar data for felsic–to–mafic terrestrial extrusive and intrusive volcanism from Late Miocene to Early Pliocene. The Ryuo epithermal gold-silver deposit occurs primarily in the felsic volcaniclastic rocks of the Ikutahara Formation and in Ryuo Rhyolite. The Ryuo mineralization age of 7. 7 – 8. 1 Ma coincides well with the hydrothermal alteration age (7. 7 Ma) of Ryuo Rhyolite hosting ore veins. It is concluded that the Ryuo mineralization was essentially accompanied by felsic volcanic activity during the sedimentation of the Ikutahara Formation, and was closely related both temporally and spatially to the intrusive activity of Ryuo Rhyolite. Hydrothermal alteration related to the epithermal gold-silver mineralization of the Ryuo deposit is primarily characterized by early regional and vein-related alterations, and late steam-heated alteration. Early regional alteration consists of a smectite halo (smectite+pyrite±quartz±opal–CT±mordenite°Clinoptilolite–heulandite series mineral). Early vein-related alteration is primarily marked by potassic alteration. This alteration halo can be subdivided into a K-feldspar halo (quartz+adular–ia+pyrite±illite±interstratified illite/smectite±smectite), an illite halo (quartz+illite + chlorite + pyrite ± interstratified illite/smec–tite±smectite) and an interstratified illite/smectite halo (quartz + interstratified illite/smectite+pyrite±smectite). Late steam-heated alteration characterized by kaolinite or alunite locally overprints the early K-feldspar halo. The style of the Ryuo gold-silver deposit is a low-sulfidation epithermal type. The gold–silver–bearing quartz vein precipitates during boiling of ore fluid. The origin of the ore fluid might be meteoric water. The temperature and sulfur fugacity conditions during precipitation of electrum and acanthite are estimated to be 206°– 238°C and 10-13.5 – 10-11.6 atm, respectively. 相似文献
10.
The Eocene and Miocene volcanic rocks between the cities of Trabzon and Giresun in the Eastern Pontides (NE Turkey) erupted as mildly and moderately alkaline magmas ranging from silica-saturated to silica-undersaturated types. 40Ar-39Ar dating and petrochemical data reveal that the studied volcanic rocks are discriminated in two: Lutetian (Middle Eocene) mildly alkaline, (basaltic rocks: 45.31 ± 0.18 to 43.86 ± 0.19 Ma; trachytic rocks: 44.87 ± 0.22 to 41.32 ± 0.12 Ma), and Messinian (Late Miocene) moderately alkaline volcanic rocks (tephrytic rocks: 6.05 ± 0.06 and 5.65 ± 0.06 Ma). The trace and the rare earth element systematic, characterised by moderate light earth element (LREE)/heavy rare earth element (HREE) ratios in the Eocene basaltic and trachytic rocks, high LREE/HREE ratios in the Miocene tephrytic rocks, and different degrees of depletion in Nb, Ta, Ti coupled with high Th/Yb ratios, show that the parental magmas of the volcanic rocks were derived from mantle sources previously enriched by slab-derived fluids and subducted sediments. The Sr, Nd and Pb isotopic composition of the Eocene and Miocene volcanic rocks support the presence of subduction-modified subcontinental lithospheric mantle. During the magma ascent in the crust, parental magmas of both the Eocene and Miocene volcanic rocks were mostly affected by fractional crystallisation rather than assimilation coupled with fractional crystallisation and mixing. The silica-undersaturated character of the Miocene tephrytic rocks could be attributed to assimilation of carbonate rocks within shallow-level magma chambers. The parental magmas of the Eocene volcanic rocks resulted from a relatively high melting degree of a net veined mantle and surrounding peridotites in the spinel stability field due to an increase in temperature, resulting from asthenospheric upwelling related to the extension of lithosphere subsequent to delamination. The parental magmas for the Miocene volcanic rocks resulted from a relatively low melting degree of a net veined mantle domain previously modified by metasomatic melts derived from a garnet peridotite source after decompression due to extensional tectonics, combined with strike-slip movement at a regional scale related to ongoing delamination. 相似文献
11.
Crnac is an intermediate sulfidation Pb–Zn–Ag epithermal deposit located within the Vardar suture zone of the Central Balkan Peninsula. The epithermal Pb–Zn–Ag mineralization consists of (i) a series of steeply-dipping veins hosted within the Jurassic amphibolites, and (ii) overlying hydrothermal-explosive breccia with angular (level IV) or rounded fragments of listwanite (surface) cemented by epithermal mineralization. The mineralization is related to the Oligocene quartz latite dykes that crosscut the Crnac antiform. Quartz latite rocks predominantly display a shoshonitic character. The obtained 40Ar/39Ar age of fresh quartz latite is 28.9 ± 0.3 Ma. Fine-grained sericite from altered quartz latite is dated at 28.6 ± 0.5 Ma. Early, alteration related fluid inclusions within quartz latite show coexistence of high-density brine and a low-density vapor-saturated phase that homogenized at 280–405 °C. Phase separation occurs at a paleodepth of 0.6 to 0.9 km.Epithermal mineralization developed in three stages: (i) early pyrite–arsenopyrite–pyrrhotite–quartz–kaolinite; (ii) main sphalerite–galena–tetrahedrite–chalcopyrite and (iii) late carbonate–pyrite–arsenopyrite assemblage. The onset of mineral deposition within epithermal veins was initiated by boiling of Na–Cl ± K ± Ca ± Mg fluid at a paleodepth of 0.6 to 0.9 km. Coexisting vapor and liquid-rich inclusions display salinities and trapping temperatures of 4 wt.% NaCl equiv., 280–370 °C and 2–27 wt.% NaCl equiv., 230–375 °C, respectively. Boiling continued throughout the deposition of the sphalerite-galena-tetrahedrite-chalcopyrite assemblage. Late stage carbonate was deposited from diluted, non-boiling, low-temperature Na–Ca–Mg–Cl ± CO2 fluid (0.2 to 4.8 wt.% NaCl equiv., 115–280 °C).About 100–150 m higher in the system, precipitation of listwanite breccia cement began as a result of boiling Na–Cl ± Ca ± Mg ± K fluid of medium salinities (2.6 to 12.1 wt.% NaCl equiv.) at temperatures of 245–370 °C. Boiling and dilution of fluids continue throughout the precipitation of the main sphalerite-galena-tetrahedrite and late, mainly carbonate assemblage. Surface listwanite breccia contain quartz phenocrysts deposited from a homogeneous fluid with a medium salinity (8–10 wt.% NaCl equiv.) and high temperatures (Th = 295–315 °C), whereas the early and main stage of a surface listwanite breccia cement precipitated from a boiling fluid of decreasing salinity and temperature. Aqueous ± CO2, high salinity (16 to 18 wt.% NaCl equiv.), low temperature (120 °C), homogeneously trapped fluid that precipitated late stage carbonates, is most likely a remnant of boiled off fluid. The epithermal assemblage of the surface listwanites precipitated at a paleodepth of 0.4 to 0.6 km.The δ13C values of the late stage ankerite range from − 4.2 to 4.1‰, whereas δ18O range from 9.6 to 17.5‰. The calculated δ18O of fluid that precipitated carbonates within epithermal veins, and listwanite breccia cement range from 6.3 to 11.3‰, indicating a contribution of magmatic water.Deposition of all mineralization types was initiated by neutralization of primary acidic magmatic fluid by water-rock reactions that caused widespread propylitization and sericitization. Extensive and long-lasting boiling combined with dilution by meteoric water increased the pH towards the final stage of hydrothermal activity. 相似文献
12.
The Milin Kamak gold-silver deposit is located in Western Srednogorie zone, 50 km west of Sofia, Bulgaria. This zone belongs to the Late Cretaceous Apuseni-Banat-Timok-Srednogorie magmatic and metallogenic belt. The deposit is hosted by altered trachybasalt to andesitic trachybasalt volcanic and volcanoclastic rocks with Upper Cretaceous age, which are considered to be products of the Breznik paleovolcano. Milin Kamak is the first gold-silver intermediate sulfidation type epithermal deposit recognized in Srednogorie zone in Bulgaria. It consists of eight ore zones with lengths ranging from 400 to 1000 m, widths from several cm to 3–4 m, rarely to 10–15 m, an average of 80–90 m depth (a maximum of 200 m) and dip steeply to the south. The average content of gold is 5.04 g/t and silver – 13.01 g/t. The styles of alteration are propylitic, sericite, argillic, and advanced argillic. Ore mineralization consists of three stages. Quartz-pyrite stage I is dominated by quartz, euhedral to subhedral pyrite, trace pyrrhotite and hematite in the upper levels of the deposit. Quartz-polymetallic stage II is represented by major anhedral pyrite, galena, Fe-poor sphalerite; minor chalcopyrite, tennantite, bournonite, tellurides and electrum; and trace pyrrhotite, arsenopyrite, marcasite. Gangue minerals are quartz and carbonates. The carbonate-gold stage III is defined by deposition of carbonate minerals and barite with native gold and stibnite.Fluid inclusions in quartz are liquid H2O-rich with homogenization temperature (Th) ranging from 238 to 345 °C as the majority of the measurements are in the range 238–273 °C. Ice-melting temperatures (Tm) range from −2.2 to −4.1 °C, salinity – from 3.7 to 6.6 wt.% NaCl equiv. These measurements imply an epithermal environment and low- to moderate salinity of the ore-forming fluids.δ34S values of pyrite range from −0.49 to +2.44‰. The average calculated δ34S values are 1.35‰. The total range of δ34S values for pyrite are close to zero suggesting a magmatic source for the sulfur. 相似文献
13.
The large-scale Duobaoshan porphyry Cu–Mo–(Au) deposit is located at the north segment of the Da Hinggan Mountains, northeast China. Six molybdenite samples from the Duobaoshan deposit were selected for Re–Os isotope measurement to define the mineralization age of the deposit, yieldings a Re–Os isochron age of 475.9 ± 7.9 Ma (2σ), which is accordant with the Re–Os model ages of 476.6 ± 6.9–480.2 ± 6.9 Ma. This age is consistent with the age of the related granodiorite porphyry, which was dated as 477.2 ± 4 Ma by zircon U–Pb analysis using LA-ICP-MS. These ages disagree with the previous K–Ar age determinations that suggest a correlation of intrusive rocks of the Duobaoshan area with the Hercynian intrusive rocks of Carboniferous–Permian age. These ages demonstrate that the Duobaoshan granodiorite porphyry and related Cu–Mo deposit occurred in the Early Ordovician. The rhenium content of molybdenite varies from 290.9 to 728.2 μg/g, with an average content of 634.8 μg/g. The high rhenium content in molybdenite of the Duobaoshan deposit suggests that the ore-forming materials may be mainly of mantle source. 相似文献
14.
The Zijinshan ore district occurs as one of the largest porphyry-epithermal Cu–Au–Mo ore systems in South China, including the giant Zijinshan epithermal Cu–Au deposit and the large Luoboling porphyry Cu–Mo deposit. The mineralization is intimately related to Late Mesozoic large-scale tectono-magmatic and hydrothermal events. The Cu–Au–Mo mineralization occurs around intermediate-felsic volcanic rocks and hypabyssal porphyry intrusions. In this study, we summarize previously available Re–Os isotopes, zircon U–Pb age and trace elements, and Sr–Nd–Pb isotope data, and present new Pb–S and Re–Os isotope data and zircon trace elements data for ore-related granitoids from the Zijinshan high-sulfidation epithermal Cu–Au deposit and the Luoboling porphyry Cu–Mo deposit, in an attempt to explore the relationship between the two ore systems for a better understanding of their geneses. The ore-bearing porphyritic dacite from the Zijinshan deposit shows a zircon U-Pb age of 108–106 Ma and has higher zircon Ce4+/Ce3+ ratios (92–1568, average 609) but lower Ti-in-zircon temperatures (588–753 °C, average 666 °C) when compared with the barren intrusions in the Zijinshan ore district. Relative to the Zijinshan porphyritic dacite, the ore-bearing granodiorite porphyry from the Luoboling deposit show a slightly younger zircon U–Pb age of 103 Ma, but has similar or even higher zircon Ce4+/Ce3+ ratios (213–2621, average 786) and similar Ti-in-zircon temperatures (595–752 °C, average 675 °C). These data suggest that the ore-bearing magmatic rocks crystallized from relatively oxidized and hydrous magmas. Combined with the high rhenium contents (78.6–451 ppm) of molybdenites, the Pb and S isotopic compositions of magmatic feldspars and sulfides suggest that the porphyry and ore-forming materials in the Luoboling Cu–Mo deposit mainly originated from an enriched mantle source. In contrast, the ore-bearing porphyritic dacite in the Zijinshan Cu–Au deposit might be derived from crustal materials mixing with the Cathaysia enriched mantle. The fact that the Zijinshan Cu–Au deposit and the Luoboling Cu–Mo deposit show different origin of ore-forming materials and slightly different metallogenic timing indicates that these two deposits may have been formed from two separate magmatic-hydrothermal systems. Crustal materials might provide the dominant Cu and Au in the Zijinshan epithermal deposit. Cu and Au show vertical zoning and different fertility because the gold transports at low oxygen fugacity and precipitates during the decreasing of temperature, pressure and changing of pH conditions. It is suggested that there is a large Cu–Mo potential for the deeper part of the Zijinshan epithermal Cu–Au deposit, where further deep drilling and exploration are encouraged. 相似文献
15.
Zhaochong Zhang Jingwen Mao Yanbin Wang Franco Pirajno Junlai Liu Zhidan Zhao 《Ore Geology Reviews》2010,37(3-4):158-174
Late Mesozoic volcanism is widespread throughout NE China. On the basis of lithological associations and spatial relationships, the volcanic rocks in the Lesser Hinggan Range can be divided into two formations, i.e., felsic-dominant Fuminghe Formation and overlying mafic-dominant Ganhe Formation. The Dong'an gold deposit, a typical adularia–sericite epithermal system, is spatially closely associated with rhyolitic porphyry, which is a subvolcanic intrusion of the Fuminghe Formation. Total measured, indicated, and inferred resources for the Dong'an deposit are 70 tonnes (2.25 Moz) of gold with the grade of 5.04 g/t Au, making it one of the largest epithermal gold deposits in China.SHRIMP U–Pb zircon and 40Ar/39Ar geochronology applied to one rhyolitic porphyry sample and sericite separated from auriferous quartz veins of the main mineralization stage were carried out to constrain magmatic and hydrothermal events. The results suggest that the mineralization age of 107.2 ± 0.6 Ma overlaps with the age of the rhyolitic porphyry 108.1 ± 2.4 Ma. Our new age data indicate that there was a previously unrecognized mineralization event in NE China at 107–108 Ma.Systematic geochemical investigations on the volcanic rocks in the Lesser Hinggan Range show that both Fuminghe and Ganhe Formations are characterized by significant large ion lithophile elements (LILE) and light rare earth elements (LREE) enrichment coupled with high field strength elements (HFSE) depletion, but they have distinct Sr and Nd isotopic compositions. The Fuminghe Formation has relative high 87Sr/86Sr ratios of 0.707253 to 0.707373, and negative εNd(t) values of ?2.78 to ?3.05 (t = 108 Ma), whereas the Ganhe Formation displays slightly lower 87Sr/86Sr range of 0.705434–0.705763 and positive εNd(t) values of + 0.76 to +1.83. These geochemical data suggest that the rhyolitic magmas of the Fuminghe Formation probably represent the final differentiates of parental andesitic magmas, resulted from the partial melting of mafic lower crust, whereas the volcanic rocks of the Ganhe Formation were produced by fractionation of basaltic magmas generated from partial melting of a mixture of an incompatible element depleted anhydrous lherzolite asthenospheric mantle source and a hydrous enriched lithospheric mantle source in an extensional tectonic setting, in response to upwelling of asthenospheric mantle. The rhyolite porphyries of the Fuminghe Formation are inferred to have supplied heat that drove the convective hydrothermal system at Dong'an deposit, but also provided some of the fluid sources responsible for the development of the Dong'an epithermal system. 相似文献
16.
The Şamlı (Balıkesir) Fe-oxide Cu (± Au) deposit, one of several iron (+ Cu ± Au) deposits in western Turkey, is hosted by porphyritic rocks of the multi-phase Şamlı pluton and metapelitic–metadiabasic rocks of Karakaya Complex. Two successive mineralization events are recognized in the area as; i) early magnetite and sulfide and ii) late hematite–goethite-native copper (± Au). Alteration associated with the mineralization in Şamlı is characterized by four distinct mineralogical assemblages. They are, in chronological order of formation, (1) plagioclase–early pyroxene (± scapolite), (2) garnet–late pyroxene, (3) chlorite–epidote, and (4) chalcedony–calcite alteration. Geochemical, isotopic (Sr, Nd, O, S) and geochronological (Ar–Ar) data from alteration and magmatic rocks suggest a temporal and genetic link between the multiphase Şamlı pluton and the hydrothermal system that controls the Fe-oxide-Cu (± Au) mineralization. 40Ar/39Ar geochronology on hornblende and biotite separates of the Şamlı pluton yielded an age range between 23.20 ± 0.50 and 22.42 ± 0.11 Ma, overlapping with 40Ar/39Ar age of 22.34 ± 0.59 Ma from alteration.The close spatial and temporal associations of Şamlı mineralization with porphyritic intrusions, pervasive Ca-rich alteration (calcic plagioclase, andraditic garnet, diopsidic pyroxene, scapolite, and epidote) are considered as common features akin to calcic assemblages in typical IOCG deposits. Besides abundant low-Ti (≤ 0.5%) magnetite/hematite, high Cu–moderate Au (up to 8.82 ppm) association, structural control and lithologic controls of mineralization, low S-sulfide content (chalcopyrite > pyrite) in the deposit; and the derivation of causative magma from subduction-modified subcontinental lithospheric mantle under a transpressional to transtensional regime, are collectively considered as the features in favor of IOCG-type mineralization for the Şamlı deposit. 相似文献
17.
The La Josefina Jurassic epithermal Au–Ag deposit located in Patagonia, Argentina, developed in an extensional setting of a back-arc environment, associated with a widespread Middle–Late Jurassic calc-alkaline volcanism. Block faulting has juxtaposed shallow level features evidenced by hot spring manifestations, hydrothermal eruption breccias and Au-rich veins, which suggest that mineralization in these veins, could extend far below the depths already tested by core drilling. Veins are filled by quartz, chalcedony, opal and minor adularia and barite with massive, comb, cockade, colloform–crustiform bandings and lattice-bladed textures. Ore minerals include electrum, Ag-rich sulfosalts (freibergite), pyrite, galena, sphalerite, chalcopyrite and specular hematite with minor arsenopyrite, marcasite, tetrahedrite and bornite. Four mineralizing stages have been identified, the first two (S1 and S2) are Au and Ag-rich, with temperatures ranging from 225 to 290° and salinities from up to 15 wt.% in S1 decreasing to ~ 1 wt.% NaCl in S2. The third stage (S3) displays higher base metal contents at lower temperatures (~ 200 °C). Finally, the last stage (S4) is barren with temperatures lower than 100 °C. Veins are surrounded by a proximal alteration halo of quartz + pyrite ± adularia ± illite followed outwards by illite/smectite interstratified clays and smectites (with less chlorite) to a propylitic zone. Stable isotope values calculated for the fluids show a mostly meteoric origin for mineralization fluids. Such distinct features place the La Josefina deposits in a hot spring environment with evidences of being formed at a proximal position of the Jurassic paleosurface and paleowater level. 相似文献
18.
The Tongjing Cu–Au deposit is a medium-sized deposit within the Ningwu volcanic basin, east China, and is hosted by Cretaceous volcanic rocks of the Dawangshan and Niangniangshan Formations. The veined and lenticular Cu–Au orebodies are spatially and temporally related to the volcanic and subvolcanic rocks of the Niangniangshan Formation in the ore district. The wall-rock alteration is dominated by silicification, siderite alteration, carbonation, sericitization, chloritization, and kaolinization. On the basis of field evidence and petrographic observations, two stages of mineralization are recognized: (1) a siderite–quartz–sulfide stage (Stage 1) associated with the formation of chalcopyrite and pyrite in a quartz and siderite gangue; and (2) a quartz–bornite stage (Stage 2) cutting the Stage 1 phases. Stage 1 is the main mineralization stage. Quartz that formed in Stage 1 has δ18OH2O values of − 4.3‰ to 3.5‰ with δD values of fluid inclusion waters of − 97.1‰ to − 49.9‰, indicating that the ore-forming fluids were derived from early magmatic fluids and may have experienced oxygen isotopic exchange with meteoric water during Stage 1 mineralization.LA–MC–ICP–MS zircon U–Pb dating of the mineralization-related nosean-bearing phonolite and nosean-bearing phonolitic brecciated tuff at Tongjing yields ages of 129.8 ± 0.5 Ma and 128.9 ± 1.1 Ma, respectively. These results are interpreted as the crystallization age of the volcanic rocks of the Niangniangshan Formation. A hydrothermal sericite sample associated with Cu–Au mineralization at Tongjing yields a plateau 40Ar–39Ar age of 131.3 ± 1.3 Ma. These results confirm a genetic link between the volcanism and associated Cu–Au mineralization. The Tongjing Cu–Au deposit in the Ningwu basin is genetically and possibly tectonically similar to alkaline intrusion-related gold deposits elsewhere in the world. 相似文献
19.
A.E. Vernikovskaya V.A. Vernikovsky N.Yu. Matushkin I.V. Romanova N.G. Berejnaya A.N. Larionov A.V. Travin 《Russian Geology and Geophysics》2010,51(5):548-562
In this paper we present complex geological, petrographic and geochronological data of the study of intermediate and acid composition intrusive and volcanogenic rocks from the Porozhnaya massif of the South Yenisei Ridge. For the first time in the Yenisei Ridge Devonian and Triassic U-Pb age values (SHRIMP method) have been obtained for leucogranites—387 ± 5 Ma and alkaline trachytes—240 ± 3 Ma, which allows us to attribute them to two different complexes, despite the fact that these rocks were formed within the same Severnaya riftogenic structure. Geochronological Ar-Ar data (392–387 Ma) for micas from paragneisses and leucogranitic dikes of the Yenisei suture zone on whose extension the Severnaya riftogenic structure is located are also given in this study. These data on Devonian tectonic-magmatic events in the South Yenisei Ridge agree well with coeval events of continental rifting—the formation of intrusive and volcanogenic rocks of the Agul graben in the Prisayan region and the Minusa basin in the Altai-Sayan folded area. The forming of alkaline trachytes and alkaline syenites of the Severnaya riftogenic structure, for which an age of 240 ± 3 Ma has been established, is related to the trap magmatism of the Siberian platform. 相似文献
20.
《Ore Geology Reviews》2010,37(4):265-281
Axi is a low-sulfidation type epithermal gold deposit hosted in Paleozoic subaerial volcanic rocks in the western Tianshan orogenic belt, Xinjiang, China. The resource is more than 50 t gold at an average grade of > 4.4 ppm. The deposit occurs in the Tulasu volcanic fault-basin in the Paleozoic active continental margin on the northern side of the Yili-Central Tianshan plate. The host rocks are andesitic volcaniclastic rocks of the Paleozoic Dahalajunshan Formation, and the orebodies occur as veins in annular faults of a paleocaldera. Mineralization at Axi can be subdivided into five stages: quartz and/or chalcedony vein, quartz vein, quartz-carbonate vein, sulfide vein and carbonate vein. There are two types of ore host: quartz vein and altered rocks. Ore minerals are native gold, electrum, pyrite, marcasite, arsenopyrite, hematite, limonite, and trace amounts of pyrargyrite, polybasite, naumannite, cerargyrite, sphalerite, chalcopyrite, tetrahedrite, galena, pyrrhotite and clausthalite; gangue minerals are mainly quartz, chalcedony, illite, calcite, siderite, dolomite, adularia and laumontite. The main wall-rock alteration is silicification and phyllic alteration, carbonatization and propylitization. The deposit is characterized by an enrichment, relative to crustal abundance, of Au, Ag, As, Sb, Bi, Hg, Se, Te and Mo, depletion in base metals (Cu, Pb, and Zn), and a low Ag/Au ratio (0.5–3.7).Three types of fluid inclusions were recognized in quartz from the major mineralization stages: liquid aqueous inclusions, liquid-rich two-phase inclusions and small amounts of vapor-rich two-phase inclusions. Microthermometric measurements indicate that the final ice melting temperatures are − 0.3 to − 4.4 °C, corresponding to salinities of 0.5–6.9 wt.% NaCl equiv. (2.2 wt.% NaCl equiv. in average). The peak temperatures of ice melting varies from − 0.4 to − 1.9 °C, corresponding to salinities of 0.7–3.1 wt.% NaCl equiv. Homogenization temperatures range mainly between 120 and 240 °C, with an average of 190 °C and a maximum of 335 °C. The fluid density is 0.73 to 0.95 g/cm3 and thus the estimated maximum mineralization depth is about 700 m.Hydrogen and oxygen isotopic compositions of the ore fluids lie within a narrow range: δDH2O is − 98 to − 116‰ and δ18OH2O − 1.8 to 0.4‰. 3He/4He ranges from 0.0218 to 0.138 Ra, with an average of 0.044 Ra, indicating that He derived predominantly from crust with negligible mantle He in the ore fluids. By contrast, the 40Ar/36Ar ranges from 317.7 to 866.0, suggesting that crust-derived radioactive 40Ar⁎ accounts for 7.0 to 66%, and atmospheric 40Ar about 43 to 93% in the ore fluids. Hydrogen, oxygen, carbon, sulfur and noble gas isotopes indicate that the ore-forming fluids of the Axi gold deposit consisted predominantly of circulating meteoric water. Ore-forming metals may have derived mainly from the host volcaniclastic rocks of the Dahalajunshan Formation and basement rocks. The occurrence of adularia, platy calcite, and quartz or sulfide aggregates as pseudomorphs after bladed calcite in ore veins, and occurrence of aqueous liquid, and liquid-rich and vapor-rich two-phase inclusions, indicates that boiling of the ore-forming fluid have occurred, leading to supersaturation of the hydrothermal solution and deposition of ore metals. This is the main mineralization mechanism for quartz-vein type ores in Axi. The ore-forming fluid was buffered to a near-neutral pH in a reduced environment during mineralization. The preservation of this Paleozoic Axi deposit and its discovery required a rapid accumulation of sediments in the basin after formation of the deposit, and minimal amount of erosion after Late Cenozoic uplift. 相似文献