共查询到20条相似文献，搜索用时 0 毫秒
1.
The Zijinshan ore district occurs as one of the largest porphyry-epithermal Cu–Au–Mo ore systems in South China, including the giant Zijinshan epithermal Cu–Au deposit and the large Luoboling porphyry Cu–Mo deposit. The mineralization is intimately related to Late Mesozoic large-scale tectono-magmatic and hydrothermal events. The Cu–Au–Mo mineralization occurs around intermediate-felsic volcanic rocks and hypabyssal porphyry intrusions. In this study, we summarize previously available Re–Os isotopes, zircon U–Pb age and trace elements, and Sr–Nd–Pb isotope data, and present new Pb–S and Re–Os isotope data and zircon trace elements data for ore-related granitoids from the Zijinshan high-sulfidation epithermal Cu–Au deposit and the Luoboling porphyry Cu–Mo deposit, in an attempt to explore the relationship between the two ore systems for a better understanding of their geneses. The ore-bearing porphyritic dacite from the Zijinshan deposit shows a zircon U-Pb age of 108–106 Ma and has higher zircon Ce4+/Ce3+ ratios (92–1568, average 609) but lower Ti-in-zircon temperatures (588–753 °C, average 666 °C) when compared with the barren intrusions in the Zijinshan ore district. Relative to the Zijinshan porphyritic dacite, the ore-bearing granodiorite porphyry from the Luoboling deposit show a slightly younger zircon U–Pb age of 103 Ma, but has similar or even higher zircon Ce4+/Ce3+ ratios (213–2621, average 786) and similar Ti-in-zircon temperatures (595–752 °C, average 675 °C). These data suggest that the ore-bearing magmatic rocks crystallized from relatively oxidized and hydrous magmas. Combined with the high rhenium contents (78.6–451 ppm) of molybdenites, the Pb and S isotopic compositions of magmatic feldspars and sulfides suggest that the porphyry and ore-forming materials in the Luoboling Cu–Mo deposit mainly originated from an enriched mantle source. In contrast, the ore-bearing porphyritic dacite in the Zijinshan Cu–Au deposit might be derived from crustal materials mixing with the Cathaysia enriched mantle. The fact that the Zijinshan Cu–Au deposit and the Luoboling Cu–Mo deposit show different origin of ore-forming materials and slightly different metallogenic timing indicates that these two deposits may have been formed from two separate magmatic-hydrothermal systems. Crustal materials might provide the dominant Cu and Au in the Zijinshan epithermal deposit. Cu and Au show vertical zoning and different fertility because the gold transports at low oxygen fugacity and precipitates during the decreasing of temperature, pressure and changing of pH conditions. It is suggested that there is a large Cu–Mo potential for the deeper part of the Zijinshan epithermal Cu–Au deposit, where further deep drilling and exploration are encouraged. 相似文献
2.
Zijinshan is the largest high-sulfidation epithermal Cu–Au deposit on mainland China. The primary mineralization at the deposit is characterized by pyrite, digenite and covellite. Although some RbSr isochron ages of the fluid inclusions in quartz and the apparent K-Ar age of the Cu-bearing alunite alteration zone have been previously interpreted as the ore-forming age, the Rb-Sr and K-Ar dating systems are usually readily reset due to their closure temperature, and thus document the latest thermal event. In order to precisely determine the age of the Cu mineralization, eight-pyrite separates were Re-Os dated, and seven yielded an isochron age of 103 ± 4 Ma with an initial 187Os/188Os ratio of 0.45 ± 0.14. This date is interpreted as the age of Cu mineralization, which is in agreement with geochronological data from molybdenite and the porphyritic granodiorite that hosts Cu-Mo mineralization at Luoboling (located 2 km NE of Zijinshan), suggesting that these two deposits were formed during the same metallogenic event. The relatively low initial 187Os/188Os ratio indicates that the source of the Cu at Zijinshan is predominantly the crust with input from the mantle. 相似文献
3.
The Yandong porphyry copper deposit, located in the Eastern Tianshan Mountains, Xinjiang, China, is part of the Central Asian Orogenic Belt. The Yandong deposit is hosted by a volcanic complex in the Early Carboniferous Qi’eshan Group and a felsic intrusion. The complex consists of andesite, basalt, diorite porphyry, and porphyritic quartz diorite. The felsic intrusion is a plagiogranite porphyry emplaced within the complex. The diorite porphyry and plagiogranite porphyry yield SIMS zircon U–Pb ages of 340.0 ± 3 and 332.2 ± 2.3 Ma, respectively. Element geochemistry shows that both the complex and plagiogranite porphyry formed in the Dananhu–Tousuquan island arc, a Carboniferous magmatic arc.The diorite porphyry and plagiogranite porphyry are host porphyries, but the plagiogranite porphyry is a productive porphyry. It caused the porphyry-style Cu mineralization and associated alteration. The alteration assemblages include early potassic and propylitic assemblages. These were overprinted by a chlorite–sericite assemblage, which in turn was overprinted by a late phyllic assemblage. The phyllic alteration is associated with the highest Cu grades. The mineralization is recognized to include three stages, from early to late: stage 1, a potassic alteration associated with a chalcopyrite + pyrite assemblage; stage 2, represented by chlorite–sericite alteration with a chalcopyrite + pyrite assemblage; and stage 3, the main-ore stage that is marked by phyllic alteration with chalcopyrite + pyrite ± molybdenite and producing more than 70% of the total copper production at Yandong. Yandong may represent a common scenario for Paleozoic porphyry Cu systems in the Central Asian Orogenic Belt. 相似文献
4.
The Engineer Mine epithermal precious metal deposit in British Columbia, Canada, is related to Eocene Sloko-Skukum-Group (SSG) volcanism and, according to previous studies, contains roscoelite in intimate association with electrum. Roscoelite, a vanadian mica, is considered characteristic of low-sulfidation epithermal deposits related to alkaline magmatism. This contradicts the fact that the SSG volcanics are subalkaline. In order to address this ambiguity and to accurately classify the style of epithermal mineralization at the Engineer Mine we conducted detailed petrographic, mineralogical, geochronological, fluid inclusion, and stable isotope studies.The principal ore assemblage of the Engineer Mine epithermal veins precipitated in response to boiling during a hydrothermal event at 49.90 Ma ± 0.25 Ma. During this event electrum, arsenopyrite, pyrite ± chalcopyrite ± sphalerite ± löllingite ± tetrahedrite-group phases ± allargentum ± acanthite ± hessite ± dyscrasite ± stibarsen ± galena and an unidentified Ag-rich phase were deposited in conjunction with amorphous silica, platy and rhombic calcite, K-feldspar, and vanadian illite. Fluid inclusion and stable isotope data suggest that the ore-forming fluid was boiling at ∼220 °C during vein mineralization and had an isotopic composition derived from local meteoric water. Based on these results the Engineer Mine is classified as an epithermal low-sulfidation deposit, which shares similarities with alkaline and subalkaline epithermal low-sulfidation deposits. This is attributed to the fact that the SSG volcanic rocks are borderline subalkaline to alkaline in character and that the sedimentary host rocks are vanadium-bearing. These sedimentary rocks contributed the bulk of the vanadium to the Engineer Mine epithermal system. The presence of roscoelite at the Engineer Mine could not be confirmed during this study. The mica referred to as roscoelite in previous publications instead is vanadian illite. To our knowledge the only alkaline low-sulfidation epithermal precious metal deposit that contains V-mica which exclusively qualifies as true roscoelite is the Porgera deposit, Papua New Guinea. 相似文献
5.
South China Block (SCB) is the broad area including the Yangtze Craton in the northwest and Huanan Orogen in the southeast. It is an important epithermal metallogenic province in China, containing at least 1 high-sulfidation (HS) and 42 low-sulfidation (LS) Au-Ag ± Cu ± Pb-Zn ± Sb epithermal deposits. Porphyry-type mineralization was recognized in four of the LS deposits, and thus they were regarded as LS–P type. These 43 deposits are mainly located in: (1) the Lower Yangtze River Belt and (2) the Northeastern Jiangnan Orogenic Belt in the Yangtze Craton, (3) the Wuyi-Yunkai Orogenic Belt and (4) the Southeast Coastal Volcanic Belt in the Huanan Orogen. They are mostly located in Mesozoic volcanic basins, especially where the regional faults and their subsidiaries occurred. The host rocks include Jurassic–Cretaceous volcanic-sedimentary rocks, coeval or slightly older subvolcanic, granitoids and breccias, and metamorphic basement rocks. The alteration of the HS epithermal deposit (Zijinshan Cu-Au) zoned from silicic (vuggy quartz), through alunite, to dickite and phyllic alteration zones, from the ore veins outwards. The alteration of the LS deposits is zoned from adularia-chalcedony-bladed calcite (or quartz pseudomorphs after bladed calcite) in ore veins to distal illite-sericite-chlorite-kaolinite assemblages. For those LS–P systems, besides the dominated LS alteration assemblages, phyllic and potassium silicate alteration related to porphyry mineralization were identified. Acid leaching textures and vein, stockwork and breccia structures are common in HS deposit, while the LS epithermal deposits are characterized by open-space filling, crustifications, colloform banding and comb structures. The ore-forming fluids are low-temperature, low-salinity meteoric water-dominated in most epithermal deposits in SCB, with variable input of magmatic water. The ore components were derived from both the deep magma and host rocks, and transported upwards or laterally and precipitated in the fracture systems by fluid boiling, mixing and cooling. Most of the epithermal deposits are formed at depth of < 1.5 km and < 300 °C, with few exceptions containing porphyry-type mineralization, such as the Zhilingtou, Yinshan and Longtoushan deposits. Deep drilling is suggested in these deposits as more epithermal and/or porphyry mineralization could be expected. The mineral systems were formed in Early Yanshanian (180–130 Ma) and Late Yanshanian (120–90 Ma) periods. The Early Yanshanian epithermal ore systems are mainly located in a series of E–W-trending metallogenic belts to the west of the Lishui–Haifeng Fault, which were formed in a syn- or post-collision tectonic setting by the collision between the SCB and its surrounding plates. The Late Yanshanian epithermal deposits are mainly located in Southeast Coastal Volcanic Belt, genetically related to the westward subduction of the paleo-Pacific plate. 相似文献
6.
The Linghou deposit, located near Hangzhou City of Zhejiang Province, eastern China, is a medium-sized polymetallic sulfide deposit associated with granitic intrusion. This deposit is structurally and lithologically controlled and commonly characterized by ore veins or irregular ore lenses. In this deposit, two mineralization events were identified, of which the former produced the Cu–Au–Ag orebodies, while the latter formed Pb–Zn–Cu orebodies. Silicification and calc-silicate (skarn type), phyllic, and carbonate alternation are four principal types of hydrothermal alteration. The early Cu–Au–Ag and late Pb–Zn–Cu mineralizations are characterized by quartz ± sericite + pyrite + chalcopyrite + bornite ± Au–Ag minerals ± magnetite ± molybdenite and calcite + dolomite + sphalerite + pyrite + chalcopyrite + galena, respectively. Calcite clusters and calcite ± quartz vein are formed during the late hydrothermal stage.The NaCl–H2O–CO2 system fluid, coexisting with NaCl–H2O system fluid and showing the similar homogenization temperatures (385 °C and 356 °C, respectively) and different salinities (16.89–21.68 wt.% NaCl eqv. and 7.70–15.53 wt.% NaCl eqv.), suggests that fluid immiscibility occurred during the Cu–Au–Ag mineralization stage and might have given rise to the ore-metal precipitation. The ore-forming fluid of the Pb–Zn–Cu mineralization mainly belongs to the NaCl–H2O–CO2 system of high temperature (~ 401 °C) and mid-high salinity (10.79 wt.% NaCl eqv.).Fluids trapped in the quartz-chalcopyrite vein, Cu–Au–Ag ores, Pb–Zn–Cu ores and calcite clusters yielded δ18OH2O and δD values varying from 5.54‰ to 13.11‰ and from − 71.8‰ to − 105.1‰, respectively, indicating that magmatic fluids may have played an important role in two mineralization events. The δ13CPDB values of the calcite change from − 2.78‰ to − 4.63‰, indicating that the CO32 − or CO2 in the ore-forming fluid of the Pb–Zn–Cu mineralization was mainly sourced from the magmatic system, although dissolution of minor marine carbonate may have also occurred during the ore-forming processes. The sulfide minerals have homogeneous lead isotopic compositions with 206Pb/204Pb ranging from 17.958 to 18.587, 207Pb/204Pb ranging from 15.549 to 15.701, and 208Pb/204Pb ranging from 37.976 to 39.052, indicating that metallic elements of the Linghou deposit came from a mixed source involving mantle and crustal components.Based on geological evidence, fluid inclusions, and H–O–C–S–Pb isotopic data, the Linghou polymetallic deposit is interpreted as a high-temperature, skarn-carbonate replacement type. Two types of mineralization are both related to the magmatic–hydrothermal system, with the Cu–Au–Ag mineralization having a close relationship with granodiorite. 相似文献
7.
The La Josefina Jurassic epithermal Au–Ag deposit located in Patagonia, Argentina, developed in an extensional setting of a back-arc environment, associated with a widespread Middle–Late Jurassic calc-alkaline volcanism. Block faulting has juxtaposed shallow level features evidenced by hot spring manifestations, hydrothermal eruption breccias and Au-rich veins, which suggest that mineralization in these veins, could extend far below the depths already tested by core drilling. Veins are filled by quartz, chalcedony, opal and minor adularia and barite with massive, comb, cockade, colloform–crustiform bandings and lattice-bladed textures. Ore minerals include electrum, Ag-rich sulfosalts (freibergite), pyrite, galena, sphalerite, chalcopyrite and specular hematite with minor arsenopyrite, marcasite, tetrahedrite and bornite. Four mineralizing stages have been identified, the first two (S1 and S2) are Au and Ag-rich, with temperatures ranging from 225 to 290° and salinities from up to 15 wt.% in S1 decreasing to ~ 1 wt.% NaCl in S2. The third stage (S3) displays higher base metal contents at lower temperatures (~ 200 °C). Finally, the last stage (S4) is barren with temperatures lower than 100 °C. Veins are surrounded by a proximal alteration halo of quartz + pyrite ± adularia ± illite followed outwards by illite/smectite interstratified clays and smectites (with less chlorite) to a propylitic zone. Stable isotope values calculated for the fluids show a mostly meteoric origin for mineralization fluids. Such distinct features place the La Josefina deposits in a hot spring environment with evidences of being formed at a proximal position of the Jurassic paleosurface and paleowater level. 相似文献
8.
The Lanping basin is a significant Pb–Zn–Cu–Ag mineralization belt of the Sanjiang Tethyan metallogenic province in China. Over 100 thrust-controlled, sediment-hosted, Himalayan base metal deposits have been discovered in this basin, including the largest sandstone-hosted Pb–Zn deposit in the world (Jinding), and several Cu ± Ag ± Co deposits (Baiyangping, Baiyangchang and Jinman). These deposits, with total reserves of over 16.0 Mt Pb + Zn, 0.6 Mt Cu, and 7000 t Ag, are mainly hosted in Meso-Cenozoic mottled clastic rocks, and strictly controlled by two Cenozoic thrust systems developed in the western and eastern segments of the Lanping basin.To define the metallogenic history of the study area, we dated nine calcite samples associated with copper sulfides from the Jinman Cu deposit by the Sm–Nd method and five molybdenite samples from the Liancheng Cu–Mo deposit by the Re–Os method. The calcite Sm–Nd age for the Jinman deposit (58 ± 5 Ma) and the molybdenite Re–Os age for the Liancheng deposit (48 ± 2 Ma), together with previously published chronological data, demonstrate (1) the Cu–Ag mineralization in the western Lanping basin mainly occurred in three episodes (i.e., ∼56–54, 51–48, and 31–29 Ma), corresponding to the main- and late-collisional stages of the Indo–Asian orogeny; and (2) the Pb–Zn–Ag (±Cu) mineralization in the eastern Lanping basin lacked precise and direct dating, however, the apatite fission track ages of several representative deposits (21 ± 4 Ma to 32 ± 5 Ma) may offer some constraints on the mineralization age. 相似文献
9.
The Eastern Qinling, Central China, containing more than 20 Mesozoic porphyry ± skarn systems, is the most important Mo province in the world. The Shangfanggou giant Mo deposit, Luanchuan County, Henan Province, is a porphyry-skarn system hosted in a lithologic association comprising carbonaceous sandstone, shale, carbonate and chert within the Neoproterozoic Luanchuan Group. Mo ores are mainly altered porphyry, skarn and hornfels, with minor altered gabbro. The mineralization process includes four stages, potassic alteration of the porphyry and skarnization of dolomite marble in stage 1, stockworks of quartz + molybdenite ± sulfide (stage 2), pyrite + quartz ± sulfides (stage 3), and carbonate ± quartz ± fluorite (stage 4), respectively. Mo mineralization was generally associated with strong silicification and/or phyllic alteration. The fluid inclusions in minerals include three compositional types, i.e., CO2-bearing (C-type), aqueous (W-type) and daughter mineral-bearing (S-type). Minerals formed in stages 1 to 3 contain all the three types of FIs, but the stage 4 minerals only contain the W-type FIs. Oxides and Cu-phosphate are recognized as daughter minerals in S-type inclusions in minerals of stage 1, whereas the daughter sulfide and reducing gases such as CO, CH4, H2S and C2H6 can be observed in quartz of stages 2 and 3, suggesting that the ore-forming fluids were initially oxidizing and then evolved to reducing. Boiling fluid inclusion assemblages can be observed in minerals formed in stage 2 or earlier, but not in stage 3 or later. Fluid boiling caused CO2 escape, oxygen fugacity decrease and rapid precipitation of ore minerals, and was a key factor causing Mo-mineralization at Shangfanggou. Data and interpretations presented in this contribution show that the fluids forming the Shangfanggou Mo deposit evolved from CO2-rich, high-salinity hypothermal, to CO2-poor, low-salinity epithermal (low-T). The Mo mineralization at the Shangfanggou deposit mainly occurred at depth of 6.6–7.0 km, deeper than the majority of porphyry systems in volcanic arcs, which resulted from a CO2-rich magma–fluid system originating from partial melting of thickened lower crust. The Shangfanggou mineral system developed during 158–134 Ma when the Yangtze–North China continental collision began to evolve from compression to extension. Magmatic hydrothermal deposits developed in a continental collision regime are generally formed by CO2-rich, high-salinity fluids. 相似文献
10.
The Luoboling Cu–Mo deposit in the Zijinshan Orefield, Fujian province, southeastern China, is a large porphyry deposit hosted by the Sifang granodiorite and the Luoboling granodiorite porphyry. The largest Cu–Mo orebody is saddle-shaped with various types of hydrothermal veinlets. Intensive hydrothermal alteration in the deposit is characterized by outward zoning from potassic, overprinted by phyllic alteration, to phyllic and alunite–dickite alteration. Based on the mineral assemblages and crosscutting relationships of veins, the ore-forming process can be divided into three stages, namely: an early-stage K-feldspar + quartz ± magnetite ± molybdenite veins associated with potassic alteration; a middle-stage quartz + molybdenite + chalcopyrite + pyrite veins in phyllic zone; and a late-stage quartz ± gypsum veins in the phyllic and alunite–dickite alteration zones. Six molybdenite separates yield a Re−Os isochron age 104.6 ± 1.0 Ma, which is identical to the age of emplacement of the Sifang and Luoboling granodiorite porphyries. Three types of fluid inclusions (FIs) were observed at the Luoboling deposit: 1) NaCl–H2O (aqueous), 2) daughter mineral-bearing and 3) CO2–H2O fluid inclusions. FIs of the early and middle stages are predominantly vapor-rich aqueous and daughter mineral-bearing inclusions, together with minor CO2-rich and liquid-rich aqueous inclusions; whereas the late-stage minerals only contain liquid-rich aqueous inclusions. Homogenization temperatures and salinities of FIs trapped in the early-stage minerals range from 420 to 540 °C and 0.4 to 62.9 wt.% NaCl equiv., respectively. FIs of the middle-stage yield homogenization temperatures of 340 to 480 °C and salinities of 0.5 to 56.0 wt.% NaCl equiv. CO2 content and the oxygen fugacity (indicated by daughter minerals) of FIs trapped in middle-stage minerals are lower than those in the early stage. The liquid-rich aqueous inclusions of the late-stage homogenize at temperatures of 140 to 280 °C, yielding salinities of 0.4 to 8.4 wt.% NaCl equiv. The minimum estimated pressures of the three stages are 30–70 MPa, 10–40 MPa and 1–10 MPa, respectively, corresponding to minimum ore-forming depths of 1–2.8 km. Fluids trapped in early, middle and late stages yield δD values of − 67‰ to − 54‰, − 54‰ to − 70‰, and − 62‰, and δ18O values of 5.4‰ to 6.7‰, 2.8‰ to 4.2‰, and − 2.1‰, respectively. Fluid boiling, which resulted in the formation of stockworks and the precipitation of sulfides, occurred in the early and middle stages. The fluids subsequently evolved into a low temperature, low salinity system in the late stage, along with an input of meteoric water. The Luoboling porphyry Cu–Mo system was developed in a transition from continental arc to back-arc extension region, which was related to the westward subduction of the paleo-Pacific plate beneath the Huanan Orogen. 相似文献
11.
Crnac is an intermediate sulfidation Pb–Zn–Ag epithermal deposit located within the Vardar suture zone of the Central Balkan Peninsula. The epithermal Pb–Zn–Ag mineralization consists of (i) a series of steeply-dipping veins hosted within the Jurassic amphibolites, and (ii) overlying hydrothermal-explosive breccia with angular (level IV) or rounded fragments of listwanite (surface) cemented by epithermal mineralization. The mineralization is related to the Oligocene quartz latite dykes that crosscut the Crnac antiform. Quartz latite rocks predominantly display a shoshonitic character. The obtained 40Ar/39Ar age of fresh quartz latite is 28.9 ± 0.3 Ma. Fine-grained sericite from altered quartz latite is dated at 28.6 ± 0.5 Ma. Early, alteration related fluid inclusions within quartz latite show coexistence of high-density brine and a low-density vapor-saturated phase that homogenized at 280–405 °C. Phase separation occurs at a paleodepth of 0.6 to 0.9 km.Epithermal mineralization developed in three stages: (i) early pyrite–arsenopyrite–pyrrhotite–quartz–kaolinite; (ii) main sphalerite–galena–tetrahedrite–chalcopyrite and (iii) late carbonate–pyrite–arsenopyrite assemblage. The onset of mineral deposition within epithermal veins was initiated by boiling of Na–Cl ± K ± Ca ± Mg fluid at a paleodepth of 0.6 to 0.9 km. Coexisting vapor and liquid-rich inclusions display salinities and trapping temperatures of 4 wt.% NaCl equiv., 280–370 °C and 2–27 wt.% NaCl equiv., 230–375 °C, respectively. Boiling continued throughout the deposition of the sphalerite-galena-tetrahedrite-chalcopyrite assemblage. Late stage carbonate was deposited from diluted, non-boiling, low-temperature Na–Ca–Mg–Cl ± CO2 fluid (0.2 to 4.8 wt.% NaCl equiv., 115–280 °C).About 100–150 m higher in the system, precipitation of listwanite breccia cement began as a result of boiling Na–Cl ± Ca ± Mg ± K fluid of medium salinities (2.6 to 12.1 wt.% NaCl equiv.) at temperatures of 245–370 °C. Boiling and dilution of fluids continue throughout the precipitation of the main sphalerite-galena-tetrahedrite and late, mainly carbonate assemblage. Surface listwanite breccia contain quartz phenocrysts deposited from a homogeneous fluid with a medium salinity (8–10 wt.% NaCl equiv.) and high temperatures (Th = 295–315 °C), whereas the early and main stage of a surface listwanite breccia cement precipitated from a boiling fluid of decreasing salinity and temperature. Aqueous ± CO2, high salinity (16 to 18 wt.% NaCl equiv.), low temperature (120 °C), homogeneously trapped fluid that precipitated late stage carbonates, is most likely a remnant of boiled off fluid. The epithermal assemblage of the surface listwanites precipitated at a paleodepth of 0.4 to 0.6 km.The δ13C values of the late stage ankerite range from − 4.2 to 4.1‰, whereas δ18O range from 9.6 to 17.5‰. The calculated δ18O of fluid that precipitated carbonates within epithermal veins, and listwanite breccia cement range from 6.3 to 11.3‰, indicating a contribution of magmatic water.Deposition of all mineralization types was initiated by neutralization of primary acidic magmatic fluid by water-rock reactions that caused widespread propylitization and sericitization. Extensive and long-lasting boiling combined with dilution by meteoric water increased the pH towards the final stage of hydrothermal activity. 相似文献
12.
The Tongjing Cu–Au deposit is a medium-sized deposit within the Ningwu volcanic basin, east China, and is hosted by Cretaceous volcanic rocks of the Dawangshan and Niangniangshan Formations. The veined and lenticular Cu–Au orebodies are spatially and temporally related to the volcanic and subvolcanic rocks of the Niangniangshan Formation in the ore district. The wall-rock alteration is dominated by silicification, siderite alteration, carbonation, sericitization, chloritization, and kaolinization. On the basis of field evidence and petrographic observations, two stages of mineralization are recognized: (1) a siderite–quartz–sulfide stage (Stage 1) associated with the formation of chalcopyrite and pyrite in a quartz and siderite gangue; and (2) a quartz–bornite stage (Stage 2) cutting the Stage 1 phases. Stage 1 is the main mineralization stage. Quartz that formed in Stage 1 has δ18OH2O values of − 4.3‰ to 3.5‰ with δD values of fluid inclusion waters of − 97.1‰ to − 49.9‰, indicating that the ore-forming fluids were derived from early magmatic fluids and may have experienced oxygen isotopic exchange with meteoric water during Stage 1 mineralization.LA–MC–ICP–MS zircon U–Pb dating of the mineralization-related nosean-bearing phonolite and nosean-bearing phonolitic brecciated tuff at Tongjing yields ages of 129.8 ± 0.5 Ma and 128.9 ± 1.1 Ma, respectively. These results are interpreted as the crystallization age of the volcanic rocks of the Niangniangshan Formation. A hydrothermal sericite sample associated with Cu–Au mineralization at Tongjing yields a plateau 40Ar–39Ar age of 131.3 ± 1.3 Ma. These results confirm a genetic link between the volcanism and associated Cu–Au mineralization. The Tongjing Cu–Au deposit in the Ningwu basin is genetically and possibly tectonically similar to alkaline intrusion-related gold deposits elsewhere in the world. 相似文献
13.
The Jiama deposit, located in the eastern part of the well-known Gangdese Metallogenic Belt on the Tibetan Plateau, is the largest porphyry Cu–polymetallic system in the region, with the largest exploration budget, and is economically viable in the Gangdese Belt to undergo large-scale development. The deposit is well preserved and has experienced little erosion. The proven resources of the deposit are 7.4 Mt Cu, 0.6 Mt Mo, 1.8 Mt Pb + Zn, 6.65 Moz Au, and 360.32 Moz Ag. The results presented in this paper are based on geological and tectonic mapping, geological logging, and other exploration work performed by members of the Jiama Exploration Project Team over a period of 6 years. We propose that the Jiama porphyry Cu–polymetallic system is composed of skarn Cu–polymetallic, hornfels Cu–Mo, porphyry Mo ± Cu, and distal Au mineralization. The development of skarn Cu–polymetallic orebodies at the Jiama deposit was controlled mainly by the contact zone between porphyries and marbles, an interlayer detachment zone, and the front zone of a gliding nappe structure. The hornfels Cu–Mo and porphyry Mo ± Cu orebodies were controlled mainly by a fracture system related to intrusions, and the distal Au mineralization resulted from late-stage hydrothermal alteration.On the basis of field geological logging, optical microscopy, and chemical analysis, we verify that the alteration zones in the Jiama deposit include potassic, phyllic, propylitic, and argillic alteration, with a local lithocap, as well as endoskarn and exoskarn zones. The endoskarn occurs mainly as epidote alteration in quartz diorite porphyry and granite porphyry, and is cut by massive andradite veins. The exoskarn includes garnet–pyroxene and wollastonite skarn, in which the mineralogy and mineral chemical compositions display an outward zonation with respect to the source porphyry. From the proximal skarn to the intermediate skarn to the distal skarn, the garnet/pyroxene ratio varies from > 20:1 to ~ 10:1 to ~ 5:1, the garnet color varies from red-brown to brown-green to green-yellow, and the average composition of garnet varies from Ad80.1Gr18.9(Sp + Py)1.0 to Ad76.3Gr23(Sp + Py)0.7 to Ad59.5Gr39.5(Sp + Py)1.0, respectively. The pyroxene is not as variable in composition as the garnet, and is primarily light green to white diopside with a maximum hedenbergite content of ~ 20% and an average composition of Di88.6Hd8.9Jo2.5. From the proximal skarn to the intermediate skarn to the distal skarn, the mineralization changes from Cu–Mo to Cu ± Mo to Pb–Zn ± Cu ± Au ores, respectively. The wollastonite skarn displays no zonation and hosts mainly bornite mineralization. The Cu and Mo mineralization is closely related to the potassic and phyllic zones in the porphyry–hornfels.Zircons from four mineralized porphyries yield U–Pb ages of 15.96 ± 0.5 Ma, 15.72 ± 0.14 Ma, 15.59 ± 0.09 Ma, and 15.48 ± 0.08 Ma. The Re–Os ages of molybdenite from the skarn, hornfels, and porphyry are 15.37 ± 0.15 Ma, 14.67 ± 0.37 Ma, and 14.66 ± 0.27 Ma, respectively. The present results are consistent with the findings of previous research on fluid inclusions, isotopes, and other such aspects. On the basis of the combined evidence, we propose a porphyry Cu–polymetallic system model for the Jiama deposit and suggest a regional exploration strategy that can be applied to prospecting for porphyry-skarn mineralization in the Lhasa area. 相似文献
14.
The Jidetun deposit is a large porphyry Mo deposit that is located in central Jilin Province, northeast China. The Mo mineralization occurs mainly at the edge of porphyritic granodiorite, as well as the adjacent monzogranite. Field investigations, cross-cutting relationships, and mineral paragenetic associations indicate four stages of hydrothermal activity. To determine the relationships between mineralization and associated magmatism, and better understand the metallogenic processes in ore district, we have undertaken a series of studies incluiding molybdenite Re–Os and zircon U–Pb geochronology, fluid inclusions microthermometry, and C–H–O–S–Pb isotope compositions. The molybdenite Re–Os dating yielded a well-defined isochron age of 168.9 ± 1.9 Ma (MSWD = 0.34) that is similar to the weighted mean 206Pb/238U age of 173.5 ± 1.5 Ma (MSWD = 1.8) obtained from zircons from the porphyritic granodiorite. The results lead to the conclusion that Mo mineralization, occurred in the Middle Jurassic (168.9 ± 1.9 Ma), was spatially, temporally, and genetically related to the porphyritic granodiorite (173.5 ± 1.5 Ma) rather than the older monzogranite (180.1 ± 0.6 Ma). Fluid inclusion and stable (C–H–O) isotope data indicate that the initial H2O–NaCl fluids of mineralization stage I were of high-temperature and high-salinity affinity and exsolved from the granodiorite magma as a result of cooling and fractional crystallization. The fluids then evolved during mineralization stage II into immiscible H2O–CO2–NaCl fluids that facilitated the transport of metals (Mo, Cu, and Fe) and their separation from the ore-bearing magmas due to the influx of abundant external CO2 and heated meteoric water. Subsequently, during mineralization stage III and IV, increase of pH in residual ore-forming fluids on account of CO2 escape, and continuous decrease of ore-forming temperatures caused by the large accession of the meteoric water into the fluid system, reduced solubility and stability of metal clathrates, thus facilitating the deposition of polymetallic sulfides. 相似文献
15.
Huogeqi is a shear zone-hosted epigenetic deposit within the greenschist-amphibolite facies of the Mesoproterozoic Langshan Group in the Langshan district on the northern margin of the North China Craton (NCC). Copper mineralization in the Huogeqi deposit was formed in two stages: a main-stage controlled by the shear zone and characterized by brittle-ductile ore-forming structures and a lower greenschist facies mineral assemblage, and a late stage characterized by open space-filling textures and low-temperature minerals. Based on microthermometric and Raman microprobe analysis, the main-stage Cu-bearing fluid was mesothermal, low-salinity and H2O–CH4-dominant, and was generated by an interaction between a deep-crustal metamorphic fluid and graphite-bearing host rocks. This interaction resulted in a more CH4-rich fluid, which was more amenable to be immiscible. We showed that immiscibility of the H2O–CH4 fluid occurred due to temperature decrease, prior to the main-stage Cu mineralization; Cu was finally precipitated from the resultant H2O-rich aqueous fluid. Main-stage Cu mineralization temperature was obtained using various methods: 310–370 °C by intersection of isochors of coexistent CH4 and aqueous inclusions; 364 ± 41 °C on average by pressure correction of the homogenization temperatures of aqueous inclusions; and 362 ± 26 °C using the chlorite geothermometer. Pressure during Cu-deposition fluctuated between lithostatic and hydrostatic at depths of ca. 10–12 km, but it seemingly had no effect on the mineralization process. The late-stage Cu-bearing fluid was a low temperature, low salinity, H2O of meteoric origin. 相似文献
16.
The Xinan Cu–Mo deposit, newly-discovered in the Zijinshan Au–Cu–Mo Orefield (the largest porphyry–epithermal system in SE China), is featured by the presence of abundant multi-phase granitoids, which reflects the complex Mesozoic tectono-magmatic evolution in the region.New and published LA-ICP-MS zircon U–Pb age data reveal that the Mesozoic Zijinshan magmatism occurred in two major phases: (1) Middle to Late Jurassic (ca. 169–150 Ma), forming the Zijinshan complex granite and the Xinan monzogranite; (2) late Early Cretaceous to earliest Late Cretaceous (ca. 112–98 Ma), forming the Shimaoshan volcanic rocks, Sifang granodiorite, and the Xinan (fine-grained) granodiorite porphyry, porphyritic granodiorite and late aplite dykes. Additionally, a possible earliest Cretaceous magmatism (ca. 141 Ma) may have occurred based on inherited zircon evidence. Major and trace element geochemistry indicates that all the Zijinshan igneous rocks show subduction-related geochemical affinities. Zircon Ce4 +/Ce3 + values of the late Early Cretaceous to earliest Late Cretaceous granitoids (Ce4 +/Ce3 + = 190–1706) are distinctly higher than the Middle to Late Jurassic ones (Ce4 +/Ce3 + = 27–457), suggesting that the former were derived from more oxidized parental magma. The Middle to Late Jurassic Zijinshan complex granite and monzogranite have εHf (t) values of − 8.02 to − 10.00, with the two-stage Hf model ages (TDM2) of 1.72 to 1.84 Ga (similar to the Paleoproterozoic metamorphosed Cathaysia Block basement), suggesting that they were derived from partial melting of the basement. The late Early Cretaceous to earliest Late Cretaceous Sifang granodiorite and Xinan (fine-grained) granodiorite porphyry, porphyritic granodiorite and aplite dykes contain higher and wider range of εHf (t) values (0.66 to − 6.05), with TDM2 of 1.12 to 1.56 Ga, indicating that they were also partial melting product of the Cathaysia basement but with more mantle and/or juvenile mafic lower crustal input. We propose that the Zijinshan Orefield was in a compressive, Pacific subduction-related tectonic setting during the Middle to Late Jurassic. The regional tectonic regime may have changed to extensional in the late Early Cretaceous to earliest Late Cretaceous, during which the Pacific plate subduction direction change and the accompanying subduction roll-back and slab window-opening occurred. The tectonic regime transition, high oxygen fugacity and mantle/mafic lower crustal materials involvement in the late Early Cretaceous to earliest Late Cretaceous may have generated the Zijinshan porphyry-related Au–Cu–Mo mineralization. 相似文献
17.
Kafang is one of the main ore deposits in the world-class Gejiu polymetallic tin district, SW China. There are three main mineralization types in the Kafang deposit, i.e., skarn Cu–Sn ores, stratiform Cu ores hosted by basalt and stratiform Cu–Sn ores hosted by carbonate. The skarn mainly consists of garnet and pyroxene, and retrograde altered rocks. These retrograde altered rocks are superimposed on the skarn and are composed of actinolite, chlorite, epidote and phlogopite. Major ore minerals are chalcopyrite, pyrrhotite, cassiterite, pyrite and scheelite. Sulfur and Pb isotopic components hint that the sources of different types of mineralization are distinctive, and indicate that the skarn ore mainly originated from granitic magma, whereas the basalt-hosted Cu ores mainly derived from basalt. Microthermometry results of fluid inclusions display a gradual change during the ore-forming process. The homogenization temperature of different types of inclusions continuously decreases from early to late mineralization stages. The salinities and freezing temperatures exhibit similar evolutionary tendencies with the T homogenization, while the densities of the different types keep constant, the majority being less than 1. Oxygen and hydrogen isotopic values (δ18O and δD) of the hydrothermal fluids fall within ranges of 3.1 to 7.7‰ with an average of 6.15‰, calculated at the corresponding homogenization temperature, and − 73 and − 98‰ with an average of − 86.5‰, respectively. Microthermometry data and H–O isotopes indicate that the ore-forming fluid of the Kafang deposit is mainly derived from magma in the early stage and a mixture of meteoric and magmatic water in late stage. Molybdenite Re–Os age of the skarn type mineralization is 83.4 ± 2.1 Ma, and the stratiform ores hosted by basalt is 84.2 ± 7.3 Ma, which are consistent with the LA-ICP-MS zircon age of the Xinshan granite intrusion (83.1 ± 0.4 Ma). The evidence listed above reflects the fact that different ore styles in the Kafang deposit belong to the same mineralization system. 相似文献
18.
A new high sulfidation epithermal Cu–Au occurrence (Nadun) has been discovered adjacent to the Cretaceous Duolong porphyry Cu–Au deposit within the Bangong–Nujiang metallogenic belt, central Tibet. The Nadun Cu–Au mineralization is hosted in a tectonic–hydrothermal breccia with advanced argillic alteration, which occurs above sandstone, associated with quartz–pyrite veins. The granodiorite porphyry with strong argillic alteration yields a zircon U–Pb age of 119.1 ± 1.3 Ma, whereas the weakly argillic granodiorite porphyry intruded into the breccia has a younger age of 116.1 ± 1.3 Ma. This indicates that Cu–Au epithermal mineralization likely occurred between ~ 116 Ma and ~ 119 Ma, consistent with the duration of magmatic–hydrothermal activity at Duolong (~ 115–118 Ma), and providing evidence that Nadun and Duolong were formed during the same event. Moreover, the Nadun and Duolong porphyries have similar Hf isotopic compositions (εHf(t) values ranging from − 8.8 to 8.1; mean = 5.0 ± 1.1, n = 32), likely indicating that the deposits are comagmatic. In addition, boiling assemblages in vapor-rich inclusions coexisting with brines occur in early stage quartz–pyrite veins, and likely record phase separation at a temperature of > 550–300 °C and pressure of 700–110 bars. Most liquid-rich fluid inclusions formed at the breccia stage show similar salinity (1.7–19.3 wt.% NaCl equiv) to vapor-rich inclusions from the underlying quartz–pyrite veins, likely indicating vapor contraction during cooling at elevated presssure. This suggests that quartz–pyrite veins may act as conduits for ore-forming fluid traveling from the porphyry to the epithermal hydrothermal system. O and H isotopic compositions (δ18Ofluid = 0.42–9.71‰ and δD = − 102 to − 66‰) suggest that ore-forming fluids are dominantly from a magmatic source with a minor addition of meteoric water at a later stage. The S and Fe isotope compositions of sulfides (δ34S = − 5.9 to 0.5‰ and δ57Fe = − 2.15 to 0.17‰) decrease from the quartz–pyrite vein to breccia ore, indicating that ore-forming fluids gradually become SO42-enriched and relatively oxidized. This body of evidence suggests that the Nadun Cu–Au mineralization may represent the root of a high sulfidation epithermal deposit. 相似文献
19.
The aim of this study is to delineate and separate mineralization phases based on surface lithogeochemical Au, Ag, As and Cu data, using the Concentration–Area (C–A) fractal method in the Touzlar epithermal Au–Ag (Cu) deposit, NW Iran. Four mineralization phases delineated by multifractal modeling for these elements are correlated with the findings of mineralization phases from geological studies. The extreme phase of Au mineralization is higher than 3.38 ppm, which is correlated with the main sulfidation phase, whereas Ag extreme phase (higher than 52.48 ppm) is associated with silicic veins and veinlets. The resulting multifractal modeling illustrates that Au and Ag have two different mineralization trends in this area. Extreme (higher than 398.1 ppm) and high mineralization phases of Cu from the C–A method correlate with hydrothermal breccias and main sulfidation stage in the deposit, respectively. Different stages of Au mineralization have relationships with As enrichment, especially in high and extreme (higher than 7.9%) phases. The obtained results were compared with fault distribution patterns, showing a positive correlation between mineralization phases and the faults present in the deposit. Moreover, mineralization phases of these elements demonstrate a good correlation with silicification and silicic veins and veinlets. 相似文献
20.
《Lithos》2007,93(1-2):68-88
In the Eclogite Zone of the Tauern Window, a layer of strongly retrogressed leucocratic jadeite-bearing gneiss is intercalated between mafic kyanite-eclogites. The jadeite-gneiss consists of garnet + quartz + paragonite ± phengite ± zoisite + zircon + rutile + apatite + pyrite. Kyanite, jadeite or omphacite are exclusively present as inclusions in garnet. Retrogressive hydration during exhumation led to a breakdown of matrix jadeite to form pseudomorphs of calcic amphibole + albite. Peak metamorphic conditions derived from the primary gneiss assemblage are 2.0–2.4 GPa at approximately 640 °C. Major, trace element and isotopic compositions of the jadeite-gneiss are consistent with a siliciclastic sedimentary protolith. Zircon morphology and zonation patterns reveal a complex history. The presence of fracture-truncated zircons suggests a detrital origin, whereas most internal structures and Th/U ratios are characteristic of zircons from magmatic rocks. In situ LA-ICP-MS and SHRIMP U–Pb geochronology and zircon geochemisty provide evidence of at least three magmatic events in the provenance area. These were dated at 466 ± 2 Ma, 437 ± 2 Ma and 288 ± 9 Ma. Older ages ranging from 503 to 691 Ma are preserved in the cores of some zircon grains, suggesting derivation from peri-Gondwanan sources. Surprisingly, no firm evidence of the Tertiary high-pressure metamorphic event and subsequent retrograde overprint was seen in any of the studied zircons. However, some zircons show resorbed surfaces suggesting corrosion by a superficial fluid phase undersaturated in zirconium and one extensively altered porous zircon yielded highly discordant 206Pb/238U ages in the range 325–109 Ma documenting partial recrystallization by dissolution–reprecipitation of a highly reactive grain. 相似文献