共查询到18条相似文献，搜索用时 265 毫秒
1.
2.
地下（矿井和隧道内）超前探测灾害水源是磁共振测深（Magnetic Resonance Sounding,MRS）方法应用的新领域,在地球物理方法中是一个难题.本文在地面磁共振探测理论的基础上,建立地下全空间模型,推导直立线圈的磁共振响应信号表达式,对比国际标准模型验证了数值计算的准确性.引入旋转系数矩阵,计算任意地磁场方向和线圈方向的激发场垂直分量.研究了磁共振响应信号与线圈法向偏角和倾角的关系,指出当线圈法向方向垂直于地磁场方向时,磁共振响应信号最大.同时,研究表明磁共振超前探测距离与激发脉冲矩和接收灵敏度紧密相关,激发脉冲矩越大,接收灵敏度越高,则超前探测距离越大,但存在极限距离.在地下线圈尺寸受限的情况下,为使检测信号灵敏度为5 nV时,超前探测距离达到30 m,提出了边长2 m线圈的匝数优化方案,共圈模式最少需要100匝,分离线圈模式最少需要10匝发射线圈和160匝接收线圈.仿真模型试验结果证明,随着噪声水平增大,磁共振超前探测距离和反演分辨率均减小.泽雅隧道探测实践表明,本文提出的地下空间磁共振理论在矿井和隧道环境中进行超前探测是可行的. 相似文献
3.
地面磁共振法(MRS)因具有定性、定量分析地下水能力,而备受关注.传统磁共振地层含水量反演多采用均匀半空间模型,忽略电阻率分布信息对结果的影响.针对这一问题,本文基于多层电介质中磁共振响应理论,提出MRS与瞬变电磁(TEM)联合反演方法,通过电阻率分布信息对含水量反演过程的实时修正,提高了解释结果的准确度.反演算法采用自适应遗传算法(AGA)进行,基于繁殖规则,动态调整交叉概率和变异概率,解决了标准遗传算法易未成熟收敛而难以得到全局最优解问题.模型数据表明,含噪10%情况下,联合反演仍能较准确地反映地下含水单元模型结构,对比MRS单独反演优势明显.同时,内蒙古白旗野外观测数据联合反演结果与钻井资料基本一致,充分验证了AGA反演算法的实用性及MRS-TEM联合反演的实际意义. 相似文献
4.
磁共振探测反演近些年得到较多的关注.传统的磁共振反演多为基于地面大线圈采集,基于初始振幅的反演,这种方法未考虑地下复杂的多孔地质环境,且限制了磁共振方法的应用范围.针对上述问题,本文尝试建立了基于隧道磁共振全弛豫信号的三维反演方法,在传统的磁共振三维正演核函数基础上,加入指数衰减项,在充分考虑地下电阻率不均匀体的情况下,采用有限元方法模拟了磁共振全弛豫信号响应.针对三维磁共振灵敏度矩阵的病态性和隧道中的电磁干扰,建立了考虑罚项的最小二乘目标函数,并结合实际对函数的解加以约束,利用基于不等式约束的最优化算法实现了三维反演.模型计算表明:本文的三维反演效果良好,不仅能实现掌子面前方含水异常体定位,而且能给出不同弛豫时间下的含水量信息,从而间接获知灾害水赋存状态,为隧道磁共振数据处理提供了一个可供借鉴的方法. 相似文献
5.
地面磁共振测深是目前唯一直接探测地下水的地球物理方法,具有灵敏、高效、无损等优点,在地下水探测中具有独特优势.玄武岩含水层常富含锶、偏硅酸等矿物质,为潜在矿泉水水源地,但其内部磁性矿物的存在限制了常规地面磁共振测深方法的应用.针对这一难题,笔者分别采用FID和CPMG两种脉冲序列开展了地面磁共振测深实验,结合钻孔资料验证了该方法的可行性.通过对两种脉冲序列反演弛豫时间和含水量的对比研究,发现FID脉冲序列反演获得平均横向弛豫时间T2*受非均匀磁场主导,并不能反映含水层孔隙度大小,但反演含水量结果优于CPMG脉冲序列;CPMG脉冲序列可以反演横向弛豫时间T2,但易导致含水量低估.因此,笔者认为在磁性含水层地面磁共振测深中,可采用FID脉冲序列反演含水量并结合CPMG脉冲序列反演T2,实现对含水层富水性和孔隙度大小进行探测. 相似文献
6.
分离线圈地面核磁共振找水方法是将激发线圈与接收线圈分离开来的找水探测方法.文中阐释分离线圈地面核磁共振找水方法正演表达式;利用高斯积分方法计算了分离线圈正演公式中的核函数.通过分析核函数的变化规律,得出分离线圈地面核磁共振方法具有较高的横向分辨率.通过计算全空间的核函数矩阵,将地下含水模型离散化,实现分离线圈地面核磁共振找水3D模型正演快速计算.通过对比计算1D含水模型响应,本文的计算选取网格的越小,正演精度越高.文中计算装置对模型的响应,分析正演曲线随着模型的埋深与装置的不同呈现的变化规律,研究分离线圈地面核磁共振的分辨特性及探测特点. 相似文献
7.
很多国家在进行隧道挖掘、地下矿体开采时,经常会遇到突水涌泥事故.核磁共振方法(Magnetic Resonance Sounding,MRS)作为目前唯一一种直接找水的地球物理技术,在探测诱发灾害的水体方面具有明显的优势.本文首先给出了多匝分离式线圈的MRS信号响应和核函数的计算公式,分析了线圈的匝数、边长和含水层位置对MRS信号响应的影响.分析表明,在限定空间内,利用多匝分离式线圈的设计方法可以提高小尺寸线圈的探测能力.同时,对高匝数线圈给探测系统带来的不利因素进行了分析和改进.最后,为了验证本研究所采用的方法,利用6 m边长的方形线圈和改进型MRS探测系统在中国温州一处在建隧道内的地下场地进行实地探测,探测结果与瞬变电磁方法结果对比表明,6 m边长的方形线圈可以对地下30 m内的含水层进行有效探测. 相似文献
8.
固定翼时间域航空电磁探测系统在实际飞行测量过程中,发射线圈、接收线圈姿态和吊舱摆动状态不断变化,在测量数据中引入如发射磁矩方向、接收分量方向以及系统收发距等参数的误差,影响数据反演成像效果.本文基于固定翼时间域航空电磁正演理论,利用姿态变换,引入发射线圈、接收线圈双旋转矩阵;根据发射、接收线圈相对位置的几何关系,求得摆动格林张量;推导了任意姿态角度以及任意摆动角度情况下的固定翼航空电磁响应三分量计算表达式.通过层状大地模型的仿真计算,分别研究了发射、接收线圈各姿态以及吊舱摆动状态对航空电磁响应的影响,得出发射线圈、接收线圈俯仰旋转和吊舱同向摆动对系统电磁响应影响最强;仿真分析了实际测量中,三种角度同时存在情况下,航空电磁响应的定量变化规律.在此基础上,讨论了响应系数与大地电导率的关系,同时给出基于响应系数的固定翼航空电磁系统线圈姿态和摆动状态校正方法,准二维层状大地模型反演结果表明,校正后数据的反演精度提高了33.1%. 相似文献
9.
大地电阻率分布信息是影响磁共振地下水探测反演结果准确性的重要因素.在众多电磁法勘探技术中,瞬变电磁法具有高分辨率、高效率和大探测深度等优势,能准确探测地下几百米范围内的电阻率分布信息.因此磁共振与瞬变电磁联合解释方法具有重要意义.然而,利用单一测点拼接的磁共振与瞬变电磁联合解释方法进行模拟二维反演时存在解释结果不唯一,容易出现错误异常体等问题,尤其在复杂地质情况下,同一测线上相邻测点探测结果连续性差,解释结果偏离实际.基于此,本文提出磁共振与瞬变电磁横向约束联合反演方法（Laterally Constrained Inversion,简称LCI）,重点引入外推积分法（quadrature with extrapolation,简称QWE）,解决了传统正演过程中基于直接数值积分方法引起的求解效率低的问题,保证了联合反演方法的顺利实施,进而以相邻测点地下结构应具备连续性为依据,引入横向约束反演思想,通过在联合反演目标函数中加入相邻测点间各模型参数约束矩阵,提高磁共振解释结果准确性,加强探测剖面地质结构和含水模型连续性.经过理论模型证实,本文提出的LCI方法能有效提高传统一维反演结果的稳定性和唯一性.最后,对安徽黄山野外实际探测数据进行横向约束联合反演,验证了磁共振与瞬变电磁LCI联合反演方法的实用性.本文的研究成果将为磁共振与瞬变电磁空间约束联合反演奠定基础. 相似文献
10.
单发双收电磁波测井测的是两接收线圈的感应电动势之间的相位差和幅度比及测井响应与地层介电常数和电导率两者有关的一般情况,对此本文推导出其在二维轴对称介质中响应函数公式,给出它的快速算法.通过建立二维非均质反演Jacobi矩阵与响应函数的关系,开辟了Jacobi矩阵快速算法构造的有效途径.从理论上得到了在均匀介质中相位差和幅度比对地层的介电常数和电导率的空间分布探测特性具有交叉互补性的结果,即相位差对电导率（介电常数）的空间分布敏感区域和幅度比对介电常数（电导率）的空间分布敏感区域是相同的. 相似文献
11.
地面磁共振方法探测地下水趋于成熟.随着研究的深入,磁共振技术在隧道超前探测方面也开展了应用.然而,由于隧道空间特殊环境限制,获取的磁共振信号信噪比极低,解释结果中各参数的确定性值得深思.基于这一问题,本文提出隧道磁共振测深超前探测模型参数不确定度分析方案,实际工作前,根据不同探测目标要求及环境噪声水平,优化仪器装置参数设计,提高解释结果准确性.本文首先在地面磁共振探测理论基础上,推导了考虑天线铺设角度影响的隧道矩形线圈激发场计算表达式,模拟了隧道准全空间磁共振测深正演响应.其次,基于后验模型协方差矩阵,计算模型参数标准偏差因子,划分参数不确定度等级.最后,构建三层含水模型,将第二层含水体作为观测目标.在仿真合成数据的基础上,分别探讨了电阻率、含水量、水体厚度、线圈边长、匝数、线圈旋转角度以及噪声水平等参数对目标含水体测定的影响.通过对比分析,得到如下结论：当探测目标前方地层的电阻率小于10 Ωm时,目标含水体的不确定度随着该电阻率的增大而降低;当该电阻率大于10 Ωm时,其不影响目标含水体的不确定度;目标体前方地层含水量的增大能够明显增加目标含水体的不确定度;目标层电阻率以及含水量对该层含水体的不确定度几乎不造成影响;目标层厚度越大其含水体的确定度越高;线圈边长和匝数的增大都能在很大程度上降低含水体的不确定度;线圈的偏转角度不影响目标体的不确定度;磁共振信号中噪声的幅度越大,含水体参数的不确定度越大.本文的研究结论有助于提高隧道磁共振探测数据反演参数的准确性,同时能够为实际探测提供预先优化参数的分析方案. 相似文献
12.
Effects of the sea floor topography on the 1D inversion of time‐domain marine controlled source electromagnetic data 
下载免费PDF全文
下载免费PDF全文 Time‐domain marine controlled source electromagnetic methods have been used successfully for the detection of resistive targets such as hydrocarbons, gas hydrate, or marine groundwater aquifers. As the application of time‐domain marine controlled source electromagnetic methods increases, surveys in areas with a strong seabed topography are inevitable. In these cases, an important question is whether bathymetry information should be included in the interpretation of the measured electromagnetic field or not. Since multi‐dimensional inversion is still not common in time‐domain marine controlled source electromagnetic methods, bathymetry effects on the 1D inversion of single‐offset and multi‐offset joint inversions of time‐domain controlled source electromagnetic methods data are investigated. We firstly used an adaptive finite element algorithm to calculate the time‐domain controlled source electromagnetic methods responses of 2D resistivity models with seafloor topography. Then, 1D inversions are applied on the synthetic data derived from marine resistivity models, including the topography in order to study the possible topography effects on the 1D interpretation. To evaluate the effects of topography with various steepness, the slope angle of the seabed topography is varied in the synthetic modelling studies for deep water (air interaction is absent or very weak) and shallow water (air interaction is dominant), respectively. Several different patterns of measuring configurations are considered, such as the systems adopting nodal receivers and the bottom‐towed system. According to the modelling results for deep water when air interaction is absent, the 2D topography can distort the measured electric field. The distortion of the data increases gradually with the enlarging of the topography's slope angle. In our test, depending on the configuration, the seabed topography does not affect the 1D interpretation significantly if the slope angle is less or around 10°. However, if the slope angle increases to 30° or more, it is possible that significant artificial layers occur in inversion results and lead to a wrong interpretation. In a shallow water environment with seabed topography, where the air interaction dominates, it is possible to uncover the true subsurface resistivity structure if the water depth for the 1D inversion is properly chosen. In our synthetic modelling, this scheme can always present a satisfactory data fit in the 1D inversion if only one offset is used in the inversion process. However, the determination of the optimal water depth for a multi‐offset joint inversion is challenging due to the various air interaction for different offsets. 相似文献
13.
《Journal of Applied Geophysics》2008,64(3-4):103-116
Karstic conduits play a crucial role for water supply in many parts of the world. However, the imaging of such targets is generally a difficult task for most geophysical methods. Magnetic Resonance Sounding (MRS) is a geophysical method designed for imaging of water bearing structures. Initially, MRS was developed for characterizing horizontally stratified aquifers. However, when applying a 1D MRS measuring setup to the imaging of 2D–3D targets, the size of which may be much smaller than the loop, the accuracy and the lateral resolution may not be sufficient. We have studied the possibility of simultaneously processing several MRS aligned along a profile to perform a Magnetic Resonance Tomography (MRT). This work emphasizes the gain of resolution for 2D–3D imagery of MRT versus the interpolation of 1D inversion results of MRS along the same profile. Numerical modelling results show that the MRT response is sensitive to the size and location of the 2D target in the subsurface. Sensitivity studies reveal that by using the coincident transmitting/receiving (TX/RX) setup and shifting the loop around the anomaly area, the depth, section and position of a single karstic conduit with a size smaller than the MRS loop size can be resolved. The accuracy of the results depends on the noise level and signal level, the latter parameter being linked to the depth and volume of the karstic conduit and the water content in the limestone matrix. It was shown that when applying MRT to the localization of 2D anomalies such as karstic conduits, the inclination of the geomagnetic field, the orientation of the MRT profile and the angle of crossover of the conduit by the MRT profile must be taken into account. Otherwise additional errors in interpretation should be expected. A 2D inversion scheme was developed and tested. Both numerical and experimental results confirm the efficiency of the developed approach. 相似文献
14.
《Journal of Applied Geophysics》2007,61(2):142-154
The productivity and the water quality of coastal aquifers can be highly heterogeneous in a complex environment. The characterization of these aquifers can be improved by hydrogeological and complementary geophysical surveys. Such an integrated approach is developed in a non-consolidated coastal aquifer in Myanmar (previously named Burma).A preliminary hydrogeological survey is conducted to know better the targeted aquifers. Then, 25 sites are selected to characterize aquifers through borehole drillings and pumping tests implementation. In the same sites, magnetic resonance soundings (MRS) and vertical electrical soundings (VES) are carried out. Geophysical results are compared to hydrogeological data, and geophysical parameters are used to characterize aquifers using conversion equations. Finally, combining the analysis of technical and economical impacts of geophysics, a methodology is proposed to characterize non-consolidated coastal aquifers.Depth and thickness of saturated zone is determined by means of MRS in 68% of the sites (evaluated with 34 soundings). The average accuracy of confined storativity estimated with MRS is ± 6% (evaluated over 7 pumping tests) whereas the average accuracy of transmissivity estimation with MRS is ± 45% (evaluated using 15 pumping tests). To reduce uncertainty in VES interpretation, the aquifer geometry estimated with MRS is used as a fixed parameter in VES inversion. The accuracy of groundwater electrical conductivity evaluation from 15 VES is enough to estimate the risk of water salinity. In addition, the maximum depth of penetration of the MRS depends on the rocks' electrical resistivity and is between 20 and 80 m at the study area. 相似文献
15.
Numerical study of the variations of magnetic resonance signals caused by surface slope 总被引：1，自引：0，他引：1
When performing forward modelling and inversion of Magnetic Resonance Sounding (MRS) data, the water-content distribution is typically assumed to be horizontal (1D case). This assumption is fully justified because MRS is often used for characterizing continuous aquifers in a nearly flat environment. However, MRS can also be used in areas with sharp topographical variations. Following a review of the standard MRS equations when using a coincident transmitter/receiver loop, the mathematical terms potentially affected by tilting of the loop are discussed. We present the results of a numerical modelling exercise, studying a case where the surface is not horizontal and the loop cannot be considered to be parallel to the top of the aquifer. This shows that maximum variations in the MRS-signal amplitude are caused mainly by north- or south-dipping slopes. Slope effects depend on the loop size (a larger loop produces a larger error) especially in the presence of shallow water. With a geomagnetic-field inclination of 65° and a slope angle ≤ 10°, the topography causes a maximum variation in amplitude of less than 10%. Near magnetic poles and equator, the slope effect is lower and undetectable in most cases. It was found that within a 10% range of variation in the amplitude, errors introduced into inversions are within the typical uncertainty for MRS inversion and hence no topographic corrections are necessary. Thus, a significant effect from non-horizontal topography might be expected only when data uncertainty is lower than the slope effect (the slope effect is lower than equivalence when data quality is poor). Today, most field data sets are inverted using the modulus of the MRS signal, but some new developments consider the complex signal (both modulus and phase). However, inversion of complex MRS signals, which would provide a higher sensitivity to groundwater distribution, may be affected by slope effect. Thus, the slope orientation and dip angle should be accurately measured in the field when the phase of MRS signals is inverted too. 相似文献
16.
磁共振测深技术传统反演方法包括平滑反演和分块反演,通过分别获取初始振幅和平均弛豫时间构建地层含水量及有效孔隙度.然而,这些方法局限于单指数拟合方式,损失了大部分有效采集信息,受限于多孔地质环境解释,并在某些情况下无法刻画含水层清晰分界面.针对上述问题,本文建立了基于MRS全数据的多指数反演方法,依据全部采集时间下的有效信息,通过弛豫时间e指数分解,推导出新的磁共振正演核函数,结合泛函极小值方程,直接反演建立含水量,弛豫时间及地层深度三个重要参数关系,适用于复杂地质环境解释.为得到快速稳定的反演结果和更清晰的含水层分界面,本文借鉴分块反演思想,进一步构建了新的反演目标函数,利用基于不等式约束的空间信赖域算法进行优化,最终实现了一种基于分层反演与多指数结合的磁共振弛豫信号反演方法.模型数据以及实测算例表明该方法的效果和优势,并具备较高的计算效率,本研究为地面磁共振反演提供了一种新的思路与方法. 相似文献
17.
《Journal of Applied Geophysics》2009,67(3-4):94-103
When performing forward modelling and inversion of Magnetic Resonance Sounding (MRS) data, the water-content distribution is typically assumed to be horizontal (1D case). This assumption is fully justified because MRS is often used for characterizing continuous aquifers in a nearly flat environment. However, MRS can also be used in areas with sharp topographical variations. Following a review of the standard MRS equations when using a coincident transmitter/receiver loop, the mathematical terms potentially affected by tilting of the loop are discussed. We present the results of a numerical modelling exercise, studying a case where the surface is not horizontal and the loop cannot be considered to be parallel to the top of the aquifer. This shows that maximum variations in the MRS-signal amplitude are caused mainly by north- or south-dipping slopes. Slope effects depend on the loop size (a larger loop produces a larger error) especially in the presence of shallow water. With a geomagnetic-field inclination of 65° and a slope angle ≤ 10°, the topography causes a maximum variation in amplitude of less than 10%. Near magnetic poles and equator, the slope effect is lower and undetectable in most cases. It was found that within a 10% range of variation in the amplitude, errors introduced into inversions are within the typical uncertainty for MRS inversion and hence no topographic corrections are necessary. Thus, a significant effect from non-horizontal topography might be expected only when data uncertainty is lower than the slope effect (the slope effect is lower than equivalence when data quality is poor). Today, most field data sets are inverted using the modulus of the MRS signal, but some new developments consider the complex signal (both modulus and phase). However, inversion of complex MRS signals, which would provide a higher sensitivity to groundwater distribution, may be affected by slope effect. Thus, the slope orientation and dip angle should be accurately measured in the field when the phase of MRS signals is inverted too. 相似文献
18.
J.-F. Girard M. Boucher A. Legchenko J.-M. Baltassat 《Journal of Applied Geophysics》2007,63(3-4):103-116
Karstic conduits play a crucial role for water supply in many parts of the world. However, the imaging of such targets is generally a difficult task for most geophysical methods. Magnetic Resonance Sounding (MRS) is a geophysical method designed for imaging of water bearing structures. Initially, MRS was developed for characterizing horizontally stratified aquifers. However, when applying a 1D MRS measuring setup to the imaging of 2D–3D targets, the size of which may be much smaller than the loop, the accuracy and the lateral resolution may not be sufficient. We have studied the possibility of simultaneously processing several MRS aligned along a profile to perform a Magnetic Resonance Tomography (MRT). This work emphasizes the gain of resolution for 2D–3D imagery of MRT versus the interpolation of 1D inversion results of MRS along the same profile. Numerical modelling results show that the MRT response is sensitive to the size and location of the 2D target in the subsurface. Sensitivity studies reveal that by using the coincident transmitting/receiving (TX/RX) setup and shifting the loop around the anomaly area, the depth, section and position of a single karstic conduit with a size smaller than the MRS loop size can be resolved. The accuracy of the results depends on the noise level and signal level, the latter parameter being linked to the depth and volume of the karstic conduit and the water content in the limestone matrix. It was shown that when applying MRT to the localization of 2D anomalies such as karstic conduits, the inclination of the geomagnetic field, the orientation of the MRT profile and the angle of crossover of the conduit by the MRT profile must be taken into account. Otherwise additional errors in interpretation should be expected. A 2D inversion scheme was developed and tested. Both numerical and experimental results confirm the efficiency of the developed approach. 相似文献