共查询到19条相似文献,搜索用时 687 毫秒
1.
对于氢原子钟,由于微波谐振腔的腔牵引效应以及外部环境温度的变化,影响谐振腔的振荡频率,导致氢原子钟长期频率稳定度降低。为了修正这种情况,使用腔自动调谐方式实现谐振腔的频率稳定在工作频率上。目前国内外主要采用的腔自动调谐技术包括3种:外部探测信号调谐方式、微波腔频率开关调谐方式和Qa调制方式。对外部探测信号调谐方式和微波腔频率开关调谐方式进行分析,并在上海天文台SOHM-4型外部探测信号调谐方式的基础上进一步探索微波腔频率开关调谐方式。基于数字信号处理器进行电路设计与程序开发,最终在SOHM-4型氢原子钟上实现腔自动调谐。 相似文献
2.
《天文学报》2018,(6)
主动型氢原子钟是时间尺度建立和保持的主要频率源,具有短期稳定度高及相位噪声低等特性,目前在国际原子时TAI (International Atomic Time)及各地方时间尺度中的作用日益重要.首先结合主动型氢原子钟内部状态参数,分析状态参数与氢原子钟比对数据的相关性,提出了氢原子钟性能监测方法.其次,针对氢原子钟性能特点,在衡量氢原子钟性能最主要的两方面,即频率稳定度及"可预测性"方面,给出了氢原子钟性能评估方法,并利用该方法对目前国际通用的两种主动型氢原子钟(CH1-75型及MHM-2010型)进行性能评估.原子钟状态参数与比对数据联合分析结果表明,状态参数监测可以有效预报钟性能的变化.原子钟频率稳定度及"可预测性"评估结果表明,中、长期稳定度越高的原子钟"可预测性"也越好. BIPM (Bureau International des Poids et Measures)权重验证结果表明,基于BIPM公布数据以及基于2次模型两种预报方法计算出来的钟"可预测性"均与BIPM公布的权重相吻合,可以作为钟"可预测性"的定量评估方法. 相似文献
3.
4.
5.
6.
守时型原子钟主要包括氢原子钟和铯原子钟,为进一步探究不同类型守时原子钟计算时间尺度相关性能,本文开展全氢钟及氢铯联合时间尺度研究。首先依据国际权度局(Bureau International des Poids et Mesures, BIPM)发布的d公报将氢原子钟进行分类,针对分类结果分别运用原子时尺度理论方法计算全氢钟时间尺度,并给出分析结果。随后计算全铯钟时间尺度,并分析探究两种不同的氢铯联合钟组时间尺度。结果表明,基于频率漂移量较小的氢钟组形成的时间尺度波动范围小,且稳定度优于频率漂移量较大的氢钟组形成的时间尺度。氢铯联合形成的时间尺度稳定度优于全铯钟时间尺度,不同的氢铯联合钟组计算得到的时间尺度结果相近。 相似文献
7.
8.
氢原子钟具有较高的短期稳定度,将其作为主钟可在短期内产生高精度的本地时间信号.但氢钟存在频率漂移现象,导致其长期稳定度较差,从而影响本地时间的准确性.毫秒脉冲星自转高度稳定,借助于其长期稳定度高的特性,可定期实现对氢原子钟的频率驾驭,并对实时信号加以控制.首先分析了国际脉冲星计时阵(International Pulsar Timing Array,IPTA)第二批发布数据中四颗毫秒脉冲星的稳定度随时间的变化,同时采用哈达玛方差分析了中国科学院国家授时中心(National Time Service Center,NTSC)一台氢钟的频率稳定性能,最终给出了利用脉冲星驾驭氢原子钟频率的方法. 相似文献
9.
10.
我台建立的原子时间基准中目前所用的频率基准是两台氢原子钟。作为频率基准,必须具备足够高的独立定标的准确度和好的长期稳定度。氢原子钟的准确度决定于引起频率偏移的各项修正的不确定度。通过分项测试表明,这两台氢原子钟C场修正的误差小于 相似文献
11.
12.
上海天文台研制的型号为SOHM-3和SOHM-4的3台氢原子钟在中国科学院国家授时中心(NTSC)已经运行了一年多时间。收集了每个氢原子钟与NTSC主钟的时间比对数据。数据的分析结果给出了这几台氢钟在不同采样间隔上的频率稳定度,也显示出1台氢钟明显的相位跳变,讨论了这种相位跳变的原因。比较了这3台氢钟和从美国进口的Symmetricom公司制造的氢钟的频率稳定度的温度变化效应,指出了上海天文台研究制的氢钟存在的主要问题。 相似文献
13.
《Chinese Astronomy and Astrophysics》2019,43(2):292-304
Active hydrogen maser is the main frequency standard for establishing and maintaining the time scale. It has the characteristics of high short-term stability and low phase noise. At present, it plays an increasingly important role in the international atomic time (TAI) and various local time scales. Firstly, in combination with the internal state parameters of an active hydrogen maser, the correlation between the internal state parameters and the comparison data of a hydrogen maser is analyzed, and a method for the performance monitoring of a hydrogen maser is proposed. Secondly, according to the characteristics of hydrogen maser performance, a method for evaluating the performance of a hydrogen maser is given. The hydrogen maser performance includes mainly two aspects, namely the frequency stability and predictability. The performances of two types of active hydrogen masers (CH1-75 and MHM-2010) are evaluated by this method. The correlation analysis of the atomic clock state parameters and comparison data shows that the state parameter monitoring can effectively predict the variation of the hydrogen maser performance. The evaluation results of atomic clock frequency stability and predictability show that the atomic clock with a higher medium-and-long term frequency stability has a better predictability. There are two methods for the predictability evaluation, one is based on the data published by BIPM (Bureau International des Poids et Measures), and another one is based on the quadratic model. Both methods are consistent with the weights published by BIPM. Therefore, the two methods can be used as a quantitative method to evaluate the predictability of a hydrogen maser. 相似文献
14.
15.
16.
在这篇文章中, 提出了一种基于改进的指数平滑和Vondrak_Cepek联合平滑的氢铯综合时间尺度产生方法. 以最小误差方法为理论基础, 动态估计氢原子钟频率漂移参数, 提升氢原子钟钟差预测准确度; 基于改进的二次指数平滑产生氢原子钟组时间尺度、加权平均方法产生铯原子钟时间尺度, 同时设计Vondrak_Cepek滤波器以结合两类时间尺度长短期稳定度优势, 提升综合时间尺度性能. 实验结果表明, 所提方法产生的氢铯综合时间尺度时稳可达1.60x10-15,天稳可达3x10-15,优于ALGOS、AT1和Kalman滤波3种经典方法产生的时间
尺度性能. 相似文献
17.
18.