共查询到20条相似文献，搜索用时 31 毫秒
1.
We derive a meshless numerical method based on smoothed particle hydrodynamics (SPH) for the simulation of conservative solute transport in heterogeneous geological formations. We demonstrate that the new proposed scheme is stable, accurate, and conserves global mass. We evaluate the performance of the proposed method versus other popular numerical methods for the simulation of one- and two-dimensional dispersion and two-dimensional advective–dispersive solute transport in heterogeneous porous media under different Pèclet numbers. The results of those benchmarks demonstrate that the proposed scheme has important advantages over other standard methods because of its natural ability to control numerical dispersion and other numerical artifacts. More importantly, while the numerical dispersion affecting traditional numerical methods creates artificial mixing and dilution, the new scheme provides numerical solutions that are “physically correct”, greatly reducing these artifacts. 相似文献
2.
A central difference method with low numerical dispersion for solving the scalar wave equation 总被引：4，自引：0，他引：4
In this paper, we propose a nearly‐analytic central difference method, which is an improved version of the central difference method. The new method is fourth‐order accurate with respect to both space and time but uses only three grid points in spatial directions. The stability criteria and numerical dispersion for the new scheme are analysed in detail. We also apply the nearly‐analytic central difference method to 1D and 2D cases to compute synthetic seismograms. For comparison, the fourth‐order Lax‐Wendroff correction scheme and the fourth‐order staggered‐grid finite‐difference method are used to model acoustic wavefields. Numerical results indicate that the nearly‐analytic central difference method can be used to solve large‐scale problems because it effectively suppresses numerical dispersion caused by discretizing the scalar wave equation when too coarse grids are used. Meanwhile, numerical results show that the minimum sampling rate of the nearly‐analytic central difference method is about 2.5 points per minimal wavelength for eliminating numerical dispersion, resulting that the nearly‐analytic central difference method can save greatly both computational costs and storage space as contrasted to other high‐order finite‐difference methods such as the fourth‐order Lax‐Wendroff correction scheme and the fourth‐order staggered‐grid finite‐difference method. 相似文献
3.
Optimal implicit staggered‐grid finite‐difference schemes based on the sampling approximation method for seismic modelling 
下载免费PDF全文
下载免费PDF全文 We propose new implicit staggered‐grid finite‐difference schemes with optimal coefficients based on the sampling approximation method to improve the numerical solution accuracy for seismic modelling. We first derive the optimized implicit staggered‐grid finite‐difference coefficients of arbitrary even‐order accuracy for the first‐order spatial derivatives using the plane‐wave theory and the direct sampling approximation method. Then, the implicit staggered‐grid finite‐difference coefficients based on sampling approximation, which can widen the range of wavenumber with great accuracy, are used to solve the first‐order spatial derivatives. By comparing the numerical dispersion of the implicit staggered‐grid finite‐difference schemes based on sampling approximation, Taylor series expansion, and least squares, we find that the optimal implicit staggered‐grid finite‐difference scheme based on sampling approximation achieves greater precision than that based on Taylor series expansion over a wider range of wavenumbers, although it has similar accuracy to that based on least squares. Finally, we apply the implicit staggered‐grid finite difference based on sampling approximation to numerical modelling. The modelling results demonstrate that the new optimal method can efficiently suppress numerical dispersion and lead to greater accuracy compared with the implicit staggered‐grid finite difference based on Taylor series expansion. In addition, the results also indicate the computational cost of the implicit staggered‐grid finite difference based on sampling approximation is almost the same as the implicit staggered‐grid finite difference based on Taylor series expansion. 相似文献
4.
Various numerical methods have been used in the literature to simulate single and multiphase flow in fractured media. A promising approach is the use of the discrete-fracture model where the fracture entities in the permeable media are described explicitly in the computational grid. In this work, we present a critical review of the main conventional methods for multiphase flow in fractured media including the finite difference (FD), finite volume (FV), and finite element (FE) methods, that are coupled with the discrete-fracture model. All the conventional methods have inherent limitations in accuracy and applications. The FD method, for example, is restricted to horizontal and vertical fractures. The accuracy of the vertex-centered FV method depends on the size of the matrix gridcells next to the fractures; for an acceptable accuracy the matrix gridcells next to the fractures should be small. The FE method cannot describe properly the saturation discontinuity at the matrix–fracture interface. In this work, we introduce a new approach that is free from the limitations of the conventional methods. Our proposed approach is applicable in 2D and 3D unstructured griddings with low mesh orientation effect; it captures the saturation discontinuity from the contrast in capillary pressure between the rock matrix and fractures. The matrix–fracture and fracture–fracture fluxes are calculated based on powerful features of the mixed finite element (MFE) method which provides, in addition to the gridcell pressures, the pressures at the gridcell interfaces and can readily model the pressure discontinuities at impermeable faults in a simple way. To reduce the numerical dispersion, we use the discontinuous Galerkin (DG) method to approximate the saturation equation. We take advantage of a hybrid time scheme to alleviate the restrictions on the size of the time step in the fracture network. Several numerical examples in 2D and 3D demonstrate the robustness of the proposed model. Results show the significance of capillary pressure and orders of magnitude increase in computational speed compared to previous works. 相似文献
5.
在地震波场数值模拟中, 交错网格有限差分技术得到了广泛的应用, 但是在弹性模量变化较大时, 通常会因插值而导致模拟误差增大. 旋转交错网格可以很好地克服这个缺点, 因而适合于各向异性介质正演模拟. 但是对于同样大小的网格单元, 旋转交错网格需要的步长比常规交错网格要大, 这会使梯度和散度算子的误差增大因而更易产生空间数值频散. 针对这些问题, 本文提出了旋转交错网格与紧致有限差分相结合的方法, 并基于模拟退火算法进行全局优化, 压制数值频散, 拓宽波数范围. 数值模拟结果表明, 此方法可以有效地压制数值频散, 且具有较高的模拟精度. 相似文献
6.
《Advances in water resources》1999,23(3):229-237
It can be very time consuming to use the conventional numerical methods, such as the finite element method, to solve convection–dispersion equations, especially for solutions of large-scale, long-term solute transport in porous media. In addition, the conventional methods are subject to artificial diffusion and oscillation when used to solve convection-dominant solute transport problems. In this paper, a hybrid method of Laplace transform and finite element method is developed to solve one- and two-dimensional convection–dispersion equations. The method is semi-analytical in time through Laplace transform. Then the transformed partial differential equations are solved numerically in the Laplace domain using the finite element method. Finally the nodal concentration values are obtained through a numerical inversion of the finite element solution, using a highly accurate inversion algorithm. The proposed method eliminates time steps in the computation and allows using relatively large grid sizes, which increases computation efficiency dramatically. Numerical results of several examples show that the hybrid method is of high efficiency and accuracy, and capable of eliminating numerical diffusion and oscillation effectively. 相似文献
7.
有限差分法广泛应用于地震波场的数值延拓,确定合适的有限差分算子以减小数值频散是有限差分法的一个重要研究内容。近年来为了进一步抑制数值频散和增加时间步长,新的有限差分模板得到了应用,对于此,前人使用泰勒展开方法和最小二乘方法确定有限差分算子系数。本文在以前工作的基础上,使用改进的线性方法确定新模板的有限差分系数,并与传统模板线性方法进行对比;通过频散分析和正演模拟验证出新模板线性方法能够更好地保持频散关系,在相同的精度下效率提高了一倍,从而说明了改进的线性方法的有效性。 相似文献
8.
复杂地形条件下地震波走时算法对于研究复杂地形地区的成像问题有着重要的意义.为了得到精度高且适应于复杂地形的走时算法,首先提出阶梯网格迎风差分法.然后将该方法与不等距网格有限差分法和混合网格线性插值法进行对比研究,得出如下结论:混合网格线性插值法的计算精度最高,但其计算效率最低;阶梯网格迎风差分法的计算精度最低,但其计算效率最高;不等距网格有限差分法的计算精度和计算效率均居中;而究竟选取哪种算法作为给定复杂地形模型的地震波走时算法,应该综合考虑地形的特点、所研究问题对计算精度及计算效率的要求等因素.最后通过一个计算实例验证了三种算法在面对复杂地形、近地表及地下复杂介质等复杂地质条件时均有很好的适应性和稳定性. 相似文献
9.
Determining finite difference weights for the acoustic wave equation by a new dispersion‐relationship‐preserving method 下载免费PDF全文
下载免费PDF全文 Numerical simulation of the acoustic wave equation is widely used to theoretically synthesize seismograms and constitutes the basis of reverse‐time migration. With finite‐difference methods, the discretization of temporal and spatial derivatives in wave equations introduces numerical grid dispersion. To reduce the grid dispersion effect, we propose to satisfy the dispersion relation for a number of uniformly distributed wavenumber points within a wavenumber range with the upper limit determined by the maximum source frequency, the grid spacing and the wave velocity. This new dispersion‐relationship‐preserving method relatively uniformly reduces the numerical dispersion over a large‐frequency range. Dispersion analysis and seismic numerical simulations demonstrate the effectiveness of the proposed method. 相似文献
10.
本文采用一种新的交错网格-Lebedev网格（LG）进行TTI介质的正演模拟研究,避免了Virieux标准交错网格（SSG）算法在处理TTI、单斜等各向异性介质时波场插值引入的数值误差,提高了模拟精度.在方法实现过程中,本文针对有限差分正演模拟面临的网格频散与边界反射两个关键性问题分别做了优化,并通过模型试算验证了它们的有效性与可行性：（1）结合最小二乘思想推导出新的频散改进差分系数（DIC）,该系数比Taylor系数更能有效地压制粗网格引起的数值频散,可以节约内存,提高计算效率;（2）将分裂的多轴完全匹配层（M-PML）吸收边界条件引入到LG算法中,解决了传统PML边界条件在某些各向异性介质中的不稳定现象并且具有较好的边界吸收效果. 相似文献
11.
Numerical simulation of seismic wavefields in TTI media using the rotated staggered-grid compact finite-difference scheme 下载免费PDF全文
下载免费PDF全文 Numerical simulation in transverse isotropic media with tilted symmetry axis(TTI) using the standard staggered-grid finite-difference scheme(SSG)results in errors caused by averaging or interpolation. In order to eliminate the errors, a method of rotated staggered-grid finite-difference scheme(RSG) is proposed. However, the RSG brings serious numerical dispersion. The compact staggered-grid finite-difference scheme(CSG) is an implicit difference scheme, which use fewer grid points to suppress dispersion more effectively than the SSG. This paper combines the CSG with the RSG to derive a rotated staggered-grid compact finite-difference scheme(RSGC). The numerical experiments indicate that the RSGC has weaker numerical dispersion and better accuracy than the RSG. 相似文献
12.
本文提出了一种新的基于平均导数优化方法(average-derivative optimal method,简称ADM)的二维VTI介质qP波波动方程频率空间域二阶9点格式,这种新算法将二维VTI介质qP波波动方程中中心空间导数项的差分近似表示为正交方向上3个网格点的加权平均形式.通过最小二乘优化方法求取空间导数项和加速度项的加权优化系数从而使数值频散达到极小化,每个波长所需要的网格点数在1%的误差范围内仅为3.57个网格点数,而VTI介质常规9点差分格式在相同的误差范围内则需要约12个网格点数,新方法的计算精度明显提高.复杂BP2007 2D VTI海洋标准模型数值模拟结果也验证了本文VTI介质9点ADM算法的有效性和准确性. 相似文献
13.
波动方程有限差分法正演模拟,对认识地震波传播规律、进行地震属性研究、地震资料地质解释、储层评价等,均具有重要的理论和实际意义.但有限差分法本身固有存在着数值频散问题,数值频散在正演模拟中是一种严重的干扰,会降低波场模拟的精度与分辨率.针对TI介质波场模拟的交错网格有限差分方法,本文从空间网格离散、时间网格离散和算子近似等三个方面对其产生的数值频散进行了分析,并结合其他学者的研究成果给出了TI介质波场模拟中压制数值频散的方法与策略：在已知介质频散关系时,对差分算子可实施算子校正;通过提高差分方程的阶数来提高波场模拟精度;采用流体力学中守恒式方程的通量校正传输方法来压制波场模拟中的数值频散;在实际正演模拟时,采用交错网格高阶有限差分方程,不仅在空间上采用高阶差分,而且在时间上也要采用高阶差分,否则只在单一方向上（空间或时间）提高方程的阶数对压制数值频散也不会取得理想的效果. 相似文献
14.
A hybrid method combining finite element and 4th-order finite difference techniques is developed to model SH and P-SV seismic wave propagation in a 2D elastic medium with irregular surface topography. Both the classic staggered grid finite difference scheme and the partially staggered grid scheme are tested. The accuracy of the hybrid method is studied by comparison with a semi-analytical and another numerical method. Subsequently, to study the amplification, numerical simulations of seismic wave propagation in a series of hills are carried out and compared with the single-hill case. Depending on the position of the source in relation to the topography, the ratio between the heights and lengths of the hills or the ratio between the lengths of the hills and the wavelength, the presence of several hills as opposed to a single one can increase the amplification effect due to topography. This study highlights the fact that, when evaluating topographic site effects, surrounding topography must be taken into account in addition to local topography. 相似文献
15.
有限差分方法是波场数值模拟的一个重要方法,交错网格差分格式比规则网格差分格式稳定性更好,但方法本身都存在因网格化而形成的数值频散效应,这会降低波场模拟的精度与分辨率.为了缓解有限差分算子的数值频散效应,精确求解空间偏导数,本文把求解波动方程的线性化方法推广到用于求解弹性波方程交错网格有限差分系数;同时应用最大最小准则作为模拟退火(SA)优化算法求解差分系数的数值频散误差判定标准来求解有限差分系数.通过上述两种方法,分别利用均匀各向同性介质和复杂构造模型进行了数值正演模拟和数值频散分析,并与传统泰勒展开算法、最小二乘算法进行比较,验证了线性化方法和模拟退火方法都能有效压制数值频散,并比较了各个算法的特点. 相似文献
16.
Iraklis Giannakis Panagiotis Tsourlos Costas Papazachos George Vargemezis Antonios Giannopoulos Nikos Papadopoulos Fabio Tosti Amir Alani 《Geophysical Prospecting》2019,67(7):1948-1964
Self-potential is a passive geophysical method that can be applied in a straightforward manner with minimum requirements in the field. Nonetheless, interpretation of self-potential data is particularly challenging due to the inherited non-uniqueness present in all potential methods. Incorporating information regarding the target of interest can facilitate interpretation and increase the reliability of the final output. In the current paper, a novel method for detecting multiple sheet-like targets is presented. A numerical framework is initially described that simulates sheet-like bodies in an arbitrary 2D resistivity distribution. A scattered field formulation based on finite differences is employed that allows the edges of the sheet to be independent of the grid geometry. A novel analytical solution for two-layered models is derived and subsequently used to validate the accuracy of the proposed numerical scheme. Lastly, a hybrid optimization is proposed that couples linear least-squares with particle-swarm optimization in order to effectively locate the edges of multiple sheet-like bodies. Through numerical and real data, it is proven that the hybrid optimization overcomes local minimal that occurs in complex resistivity distributions and converges substantially faster compared to traditional particle-swarm optimization. 相似文献
17.
We recently proposed an efficient hybrid scheme to absorb boundary reflections for acoustic wave modelling that could attain nearly perfect absorptions. This scheme uses weighted averaging of wavefields in a transition area, between the inner area and the model boundaries. In this paper we report on the extension of this scheme to 2D elastic wave modelling with displacement‐stress formulations on staggered grids using explicit finite‐difference, pseudo‐implicit finite‐difference and pseudo‐spectral methods. Numerical modelling results of elastic wave equations with hybrid absorbing boundary conditions show great improvement for modelling stability and significant absorption for boundary reflections, compared with the conventional Higdon absorbing boundary conditions, demonstrating the effectiveness of this scheme for elastic wave modelling. The modelling results also show that the hybrid scheme works well in 2D rotated staggered‐grid modelling for isotropic medium, 2D staggered‐grid modelling for vertically transversely isotropic medium and 2D rotated staggered‐grid modelling for tilted transversely isotropic medium. 相似文献
18.
The advection–dispersion equation with spatially variable coefficients does not have an exact analytical solution and is therefore solved numerically. However, solutions obtained with several of the traditional finite difference or finite element techniques typically exhibit spurious oscillation or numerical dispersion when advection is dominant. The mixing cell and semi-analytical solution methods proposed in this study avoid such oscillation or numerical dispersion when advection dominates. Both the mixing cell and semi-analytical solution methods calculate the spatial step size by equating numerical dispersion to physical dispersion. Because of the spatial variability of the coefficients the spatial step size varies in space. When the time step size Δt→0, the mixing cell method reduces to the semi-analytical solution method. The results of application to two cases show that the mixing cell and semi-analytical solution methods are better than a finite difference method used in the study. © 1998 John Wiley & Sons, Ltd. 相似文献
19.
Numerical dispersion, numerical oscillation, and peak clipping are common numerical difficulties in solving advection-dispersion equations. The development of numerical approaches that can handle these numerical difficulties with reasonable computational efforts is an ongoing challenge. In this paper, an interpolation-corrected modified method of characteristics (ICMMOC) is proposed for solving advection-dispersion equations. The ICMMOC is an improved version of the modified method of characteristics (MMOC). It uses a high-order (second-order or higher) interpolation scheme to reduce numerical dispersion and an interpolation-correction procedure to eliminate numerical oscillation. A simple peak capturing scheme to overcome the peak clipping problem is also developed in this study. Simulation results show that the ICMMOC is able to overcome the aforementioned numerical difficulties for a large range of grid Peclet numbers. 相似文献
20.
《Advances in water resources》2005,28(3):257-271
We present a new approach to reservoir simulation that gives accurate resolution of both large-scale and fine-scale flow patterns. The method uses a mixed multiscale finite-element method (MMsFEM) to solve the pressure equation on a coarse grid and a streamline-based technique to solve the fluid transport on a fine-scale subgrid. The MMsFEM is based on the construction of special approximation velocity spaces that are adaptive to the local properties of the differential operator. As such, MMsFEM produces a detailed subgrid velocity field that reflects the impact of the fine-scale heterogeneous structures. By combining MMsFEM with rapid streamline simulation of the fluid transport, we aim towards a numerical scheme that facilitates routine reservoir simulation of large heterogeneous geomodels without upscaling. The new method is applied to two different test cases. The first test case consists of two (strongly) heterogeneous quarter five-spot problems in 2D. The second test case is a 3D upscaling benchmark taken from the 10th SPE Comparative Solution Project, a project whose purpose is to compare and validate upscaling techniques. The test cases demonstrate that the combination of multiscale methods and streamlines is a robust and viable alternative to traditional upscaling-based reservoir simulation. 相似文献