共查询到20条相似文献，搜索用时 15 毫秒
1.
V. M. Grannik 《Doklady Earth Sciences》2012,445(2):934-938
It has been established that volcanic rocks of the Schmidt, Rymnik, and Terpeniya terranes are fragments of the compound Early to Late Cretaceous-Paleogene East Sakhalin island arc system of the Sea of Okhotsk region. This island arc paleosystem was composed of back-arc volcano-plutonic belt, frontal volcanic island arc, fore-arc, inter-arc, and back-arc basins, and the Sakhalin marginal paleobasin. The continental volcanic rocks dominate in the back-arc volcano-plutonic belt and frontal volcanic island arc. The petrochemical composition of basalts, basaltic andesites, andesites, and trachytes from the frontal island arc formed in submarine conditions are typical of oceanic island arc or marginal sea rocks (IAB). The petrochemical composition of volcanic rocks from the island arc structures indicates its formation on the heterogeneous basement including the continental and oceanic blocks. 相似文献
2.
The conditions of magma formation were reconstructed on the basis of characteristic features of the evolution of the Kurile-Kamchatka island-arc system, structural and chemical zoning patterns of volcanic complexes, and available published data on peridotite and basalt melting and stability of hydrous minerals. It was shown that the volcanic arc of the Sredinnyi Range of Kamchatka occurs now at the final stage of subduction, whereas subduction beneath the volcanic arc of eastern Kamchatka began at the end of the Miocene, after its jump into the present-day position. The volcanism of Southern Kamchatka and the Kuriles has occurred under steady-state subduction conditions since the Miocene and is represented by typical island-arc magmas. The latter are generated in a mantle wedge, where the melting of water-saturated peridotite occurs in a high-temperature zone under the influence of fluid. The formation of the frontal and rear volcanic zones was related to the existence of two levels of water release from various hydrous minerals. During the initial and final stages of subduction, as well as in the zone of Kamchatka—Aleutian junction, partial melting is possible in the upper part of the subducted slab in contact with a hotter mantle material compared with the mantle in a steady-state regime. This is responsible for the coexistence of predominant typical island-arc rocks, rocks with intraplate geochemical signatures, and highly magnesian rocks, including adakites. 相似文献
3.
The geodynamic evolution, deep structure, and metallogenic regionalization of the Rudny Altai are considered in terms of plate tectonics. The base-metal massive sulfide deposits are genetically related to the group of basalt-andesite-rhyolite sequences formed in rift or island-arc geodynamic setting in the Devonian at the early stage of Hercynian tectogenesis. Taking into account economic reserves of ore and major metals (Cu, Pb, Zn, Au, Ag), as well as lateral and vertical regional metallogenic zoning of the Rudny Altai, the localization of massive sulfide mineralization in ore-bearing structural elements and particular deposits has been specified. The ore productivity of ore-bearing geochronological levels for base metals and the contribution of these levels to the total reserves of the region are characterized in detail. The Rudny Altai basemetal belt is regarded as a continuous ore-bearing structural unit situated in Russia and Kazakhstan. 相似文献
4.
三江上叠裂谷盆地人支雪山组火山岩是赋存火山成因块状硫化物矿床(VHMS)的重要层位,但对其形成时代一直存在着争议。本文对几家顶一带人支雪山组火山岩进行了LA-ICPMS锆石U-Pb年代学研究,结果显示,两件流纹岩样品中锆石23个分析点的206Pb/238U年龄分别为247.4±2.1Ma和249.1±1.6Ma,因此人支雪山组火山岩形成于早三叠世(249～247Ma)。地球化学资料表明,人支雪山组火山岩形成于一个伸展的地球动力学背景,由此本文认为金沙江结合带在早三叠世已进入弧-陆碰撞后的伸展时期。 相似文献
5.
Paolo Nimis Paolo Omenetto Bernd Buschmann Peter Jonas Vladimir A. Simonov 《Mineralogy and Petrology》2010,100(3-4):201-214
Ultramafic–mafic- and ultramafic-hosted Cu (Co, Ni, Au) volcanogenic massive sulfide (VMS) deposits from ophiolite complexes of the Main Uralian Fault, Southern Urals, are associated with island arc-type igneous rocks. Trace element analyses show that these rocks are geochemically analogous to Early Devonian boninitic and island arc tholeiitic rocks found at the base of the adjacent Magnitogorsk volcanic arc system, while they are distinguished both from earlier, pre-subduction volcanic rocks and from later volcanic products that were erupted in progressively more internal arc settings. The correlation between the sulfide host-rocks and the earliest volcanic units of the Magnitogorsk arc suggests a connection between VMS formation and infant subduction-driven intraoceanic magmatism. 相似文献
6.
川西呷村黑矿型矿床含矿火山岩系热液蚀变与物质-化学变化 总被引：2，自引：0，他引：2
川西呷村黑矿型矿床产于酸性流纹质火山岩系上部。矿区蚀变可分为矿化热液蚀变和区域低温蚀变，后者广布矿区；前者绕网脉矿（硅矿）形成蚀变岩筒，并具明显的蚀变分带：自内而外由石英－钡冰长石带向绢云母－石英带递变，自下而上由绿泥石带向石英－绢云母带递进。采用“惰性”微量元素方法恢复了含矿岩系原岩成分，定量估算了蚀变引起的物质－化学变化。在蚀变岩筒中，Ｃｕ、Ｐｂ、Ｚｎ强烈富集，远离蚀变岩筒，Ｃｕ略有亏损，Ｐｂ 相似文献
7.
甘肃白银厂-石青硐火山岩带是北祁连地区块状硫化物矿床成矿带的主要地段，在其中已发现6个工业矿床。典型矿床的综合信息找矿模型研究对于进一步开展矿体定位预测具有重要意义。文章将已发现的矿床划分为火山喷口Cu(Zn)型(折腰山型)、火山喷口斜坡Zn—Pb-Cu型(小铁山型)和火山沉积洼地Pb-Zn-Cu型(石青硐型)三(亚)类，并通过对典型矿床的地质特征、地球物理特征、地球化学特征及找矿标志等进行对比分析和研究，建立了折腰山型、石青硐型两类矿床的综合信息找矿模型。应用该模型在黑石山地区进行成矿预测，取得了良好的效果。 相似文献
8.
新疆准北地区铜矿床主要类型控矿条件及找矿前景分析 总被引：5，自引：0，他引：5
准北地区铜矿床已发现有岩浆熔离铜镍硫化物型，海相火山岩型，隐爆角砾岩型和陆相火山岩型，那林卡拉－喀拉通克铜镍矿带受控于海沟岛弧盆地内基性岩带的控制，岩浆分异程度对铜矿形成具有明显的控制作用，海相火山岩铜矿受火山机构制约，常产出于海底火山喷发中心及附近洼地，将准北地区划分冲乎尔－麦兹铜多金属，阿舍勒铜锌，额尔齐斯铜（镍）金－萨吾尔－加波萨尔铜（钼）和谢米斯台－阿尔曼台－北塔山铜等五个具找矿前景的成矿 相似文献
9.
本文重点简述了特提斯构造域内古，中，新三个演化阶段的蛇绿混杂岩与岛弧带的时空展布及其沟－弧－盆体系，所识别出的蛇绿混杂岩，洋中脊拉斑玄武岩，大洋沉积物的岛弧带等地质记录，提供了东特提斯早期大洋岩石圈板块运动的有力证据。同时，与岛弧有关的不同时期不同阶段的各种弧前盆地，弧间盆地和弧后贫地成为造山带板块会聚边缘特征的标志。 相似文献
10.
11.
云南大平掌铜多金属矿床成矿作用 总被引：4，自引：1，他引：3
云南大平掌矿床位于澜沧江火山岩带的中南段,左侧是澜沧江和酒房深大断裂。矿区内发育一套形成于岛弧环境的上石炭统细碧-石英角斑岩系,矿体产于流纹质火山岩中,产状与火山岩一致。矿体分2类,上部为块状矿体,下部为细脉-浸染状矿体。矿床内热液蚀变发育,特别是浸染状矿体中更强,并从矿体中心向外侧形成分带。具工业意义的Cu、Pb、Zn等元素以硫化物形式产出。S、Pb、Sr、Nd等同位素成分表明,成矿物质来源于地幔-下地壳。尽管矿体受后期构造破坏强烈,但综合研究表明,该矿床仍具有世界上绝大多数火山成因块状硫化物矿床的共同性。它与区内类似矿床的差异性,为在该区寻找火山成因块状硫化物矿床开辟了新方向。 相似文献
12.
John A. Katili 《Tectonophysics》1978,45(4):289-322
Sulawesi with its peculiar K-shaped pattern is situated in an area where the Eurasian, Indian—Australian and Pacific plates interact and collide.Complex geological processess in this area resulted in the transformation of a normal island-arc structure into an inverted one, deformation of an already tectonized belt, sweeping of fragments against unrelated terrain, thrusting of oceanic and mantle material over the island arc, closing of deep-sea basins behind the arc, trapping of old oceanic crust caused by the rolling up of an island arc, formation of a marginal basin by the spreading of the sea floor behind the arc, development of small subduction zones with reverse polarities etc.Small deep-sea basins surrounding Sulawesi such as the Gulf of Bone and the Gulf of Gorontalo originally formed the arc—trench gap of the Sulawesi island arc.The Banda Sea is considered as an oceanic crust trapped by the bending of the east—west trending Banda arc due to the northward drift of Australia combined with the westward movement of the Pacific plate. Similarly the Sulawesi Sea consists of an old Pacific crust trapped by the westward bending of the Sulawesi island arc, caused by the spearheading westward thrust along the Sorong transform-fault system, in which later a minor spreading center became active in its central part. The Molucca Sea comprises tectonic mélange in which presumably a small spreading center developed between the two colliding arcs of northern Sulawesi and western Halmahera. While the Benioff zones dip under the northern Sulawesi and Halmahera arcs in normal fashion, the mélange thrusts over them. The Strait of Makassar is a marginal basin which was brought into existence by the spreading of the sea floor between Kalimantan and Sulawesi.The evolution of Sulawesi started in Miocene time or even earlier when 800 km east of Kalimantan a north—south trending east-facing island arc came into existence, originating from a spreading center located in the Pacific Ocean. Volcanism and plutonism accompanied this subduction process.Collision between Sulawesi and the Australian—New Guinea plate which occurred in early Pliocene time severely transformed Sulawesi into an island with its convex side turned towards the continent, at the same time causing obduction of ophiolite in the eastern arc of this island.The movement of the Pacific plate continued and gradually pushed Sulawesi towards the Asian continent, resulting in the closing of the sea between Kalimantan and Sulawesi islands separated by small straits and deep seas resembling the complicated pattern of the Philippine Archipelago, in which the original double island-arc structure can no longer be recognized. 相似文献
13.
《International Geology Review》2012,54(16):1870-1884
The Central Eastern Desert (CED) is characterized by the widespread distribution of Neoproterozoic intra-oceanic island arc ophiolitic assemblages. The ophiolitic units have both back-arc and forearc geochemical signatures. The forearc ophiolitic units lie to the west of the back-arc related ones, indicating formation of an intra-oceanic island arc system above an east-dipping subducted slab (present coordinates). Following final accretion of the Neoproterozoic island arc into the western Saharan Metacraton, cordilleran margin magmatism started above a new W-dipping subduction zone due to a plate polarity reversal. We identify two belts in the CED representing ancient arc–forearc and arc–back-arc assemblages. The western arc–forearc belt is delineated by major serpentinite bodies running ～NNW–SSE, marking a suture zone. Ophiolitic units in the back-arc belt to the east show an increase in the subduction geochemical signature from north to south, culminating in the occurrence of bimodal volcanic rocks farther south. This progression in subduction magmatism resulted from diachronous opening of a back-arc basin from north to south, with a bimodal volcanic arc evolving farther to the south. The intra-oceanic island arc units in the CED include coeval Algoma-type banded iron formations (BIFs) and volcanogenic massive sulphide (VMS) deposits. Formation of the BIFs was related to opening of an ocean basin to the north, whereas development of the VMS was related to rifting of the island arc in the south. Gold occurs as vein-type mineral deposits, concentrated along the NNW–SSE arc–forearc belt. The formation of these vein-type gold ore bodies was controlled by the circulation of hydrothermal fluids through serpentinites that resulted in Au mobilization, as constrained by the close spatial association of auriferous quartz veins with serpentinites along the western arc–forearc belt. 相似文献
14.
The Blovice accretionary complex, Bohemian Massif, hosts well-preserved basaltic blocks derived from an oceanic plate subducted beneath the northern active margin of Gondwana during late Neoproterozoic to early Cambrian. The major and trace element and Hf–Nd isotope systematics revealed two different suites, tholeiitic and alkaline, whose composition reflects different sources of melts within a back-arc basin setting. The former suite has composition similar to mid-ocean ridge basalts (MORB), yet with striking enrichment in large-ion lithophile elements (LILE) and Pb paralleled by depletion in Nb, in agreement with its derivation from depleted mantle fluxed by subduction-related fluids. In contrast, the latter suite has composition similar to ocean island basalts (OIB) with variable contribution of ancient, recycled crustal material. We argue that both suites represent volcanic members of Ocean Plate Stratigraphy (OPS) and indicate that the oceanic realm consumed by the Cadomian subduction was a complex mosaic of intra-oceanic subduction zones, volcanic island arcs, and back-arc basins with mantle plume impinging the spreading centre. Hence, the basalt geochemistry implies that two distinct domains of oceanic lithosphere may have existed off the Gondwana’s continental edge: an outboard domain, made up of old and less buoyant oceanic lithosphere (remnants of the Mirovoi Ocean surrounding former Rodinia?) that was steeply subducted and generated the back-arcs, and young, hot, and more buoyant oceanic lithosphere generated in the back-arcs and later involved in accretionary complexes as dismembered OPS. Perhaps the best recent analogy of this setting is the Izu Bonin–Mariana arc–Philippine Sea in the western Pacific. 相似文献
15.
红透山式块状硫化物铜锌矿床古火山环境及与成矿关系研究 总被引：3，自引：0，他引：3
“红透山式”块状硫化物铜锌矿床的成矿作用主要出现在三个较大的火山喷发-沉积旋迴中，双峰式火山岩构成了“红透山式”矿床的含矿岩系。呈透镜状、扁豆状的火山碎屑岩的发现为研究该类矿床提供了较为直观的地质依据。稀散元素和硫同位素特征亦表明该类矿床为古火山机构控制的海底火山喷发-沉积矿床。总结归纳了火山作用与成矿的关系。 相似文献
16.
鲁春VMS 锌铅铜多金属矿床产于金沙江构造带内鲁春-红坡牛场伸展裂谷盆地中,是三江地区典型的火山成因块状硫化物矿床,其含矿层位为双峰式火山岩系中的流纹质火山--沉积岩系。通过研究该矿床的主成矿元素、双峰式火山岩和矿石的稀土元素特征,对其成矿金属来源、赋矿火山岩及构造环境进行研究表明,鲁春多金属矿床属Zn --Pb --Cu 型火山成因块状硫化物矿床,形成于碰撞造山后在薄陆壳( 陆缘弧) 基底上伸展而成的裂谷盆地环境; 矿石的主成矿元素含量特征w ( Zn) /w ( Pb + Zn) 均值为0. 64,与日本黑矿和四川呷村矿床较为接近; ΣREE 为( 15. 99 ～ 144. 43) × 10 － 6,平均73. 99 × 10 － 6,LREE/ HREE 为3. 59 ～ 11. 40,平均6. 30,呈典型的LREE 富集型; δEu 为0. 13 ～ 0. 46,平均0. 28,Eu 负异常明显,与矿区流纹岩极为相似。矿体与流纹岩空间上的密切关系以及地球化学特征的一致性表明,成矿金属元素源自下伏的长英质岩系。 相似文献
17.
E.S. Farahat 《Lithos》2010,120(3-4):293-308
Ophiolites are widely distributed in the Central Eastern Desert (CED) of Egypt, occurring as clusters in the northern (NCEDO) and southern (SCEDO) segments. Mineralogical and geochemical data on the volcanic sections of Wizer (WZO) and Abu Meriewa (AMO) ophiolites as representatives of the NCEDO and SCEDO, respectively, are presented.The WZO volcanic sequence comprises massive metavolcanics of MORB-like compositions intruded by minor boninitic dykes and thrust over island-arc metavolcanic blocks in the mélange matrix. Such transitional MORB-IAT-boninitic magmatic affinities for the WZO metavolcanics suggest that they most likely formed in a protoarc–forearc setting. Chemical compositions of primary clinopyroxene and Cr-spinel relicts from the WZO volcanic section further confirm this interpretation. The compositional variability in the WZO volcanic sequence is comparable with the associated mantle rocks that vary from slightly depleted harzburgites to highly depleted harzburgites containing small dunite bodies, which are residues after MORB, IAT and boninite melt formation, respectively. Source characteristics of the different lava groups from the WZO indicate generation via partial melting of a MORB source which was progressively depleted by melt extraction and variably enriched by subduction zone fluids. MORB-like magma may have been derived from ~ 20% partial melting of an undepleted lherzolite source, leaving slightly depleted harzburgite as a residuum. The generation of island-arc magma can be accounted for by partial melting (~ 15%) of the latter harzburgitic mantle source, whereas boninites may have been derived from partial melting (~ 20%) of a more refractory mantle source previously depleted by melt extraction of MORB and IAT melts, leaving ultra-refractory dunite bodies as residuum.The AMO volcanic unit occurs as highly deformed pillowed metavolcanic rocks in a mélange matrix. They can be categorized geochemically into LREE-depleted (La/YbCN = 0.41–0.50) and LREE-enriched (La/YbCN = 4.7–4.9) lava types that show an island arc to MORB geochemical signature, respectively, signifying a back-arc basin setting. This is consistent, as well, with their mantle section. Source characteristics indicate depleted to slightly enriched mantle sources with overall slight subduction zone geochemical affinities as compared to the WZO.Generally, CED ophiolites show supra-subduction zone geochemical signature with prevalent island arc tholeiitic and minor boninitic affinities in the NCEDO and MORB/island-arc association in the SCEDO. Such differences in geochemical characteristics of the NCEDO and SCEDO, along with the abundance of mature island arc metavolcanics which are close in age (~ 750 Ma) to the ophiolitic rocks, general enrichment in HFSE of ophiolites from north to south, and lack of a crustal break and major shear zones, is best explained by a geotectonic model whereby the CED represents an arc–back-arc system above a southeast-dipping subduction zone. 相似文献
18.
The Karchiga copper massive sulfide deposit is located in the Kurchum block of high-grade metamorphosed rocks. This block is part of the Irtysh shear zone, which belongs to the largest transregional fault in Central Asia. The deposit is associated with the gneiss–amphibolite middle unit of the metamorphic complex, which is distinct in the geochemical fields. The mineralization is spatially and paragenetically related to the amphibolite beds, which are ore-bearing together with terrigenous rocks.The deposit contains two spatially isolated lodes, in which all the discovered commercial reserves concentrate. They conformably overlie the host rocks and are tabular or ribbonlike. The mineralization has a close spatial relationship with Mg-rich anthophyllite-containing rocks. The sulfide ores are disseminated or massive and comprise pyrite, chalcopyrite, pyrrhotite, sphalerite, and magnetite. The ore is of Zn–Cu composition, in which Cu dominates considerably over Zn (average contents 2 and 0.4%, respectively; Cu/(Cu + Zn) = 0.83). The ores are rich in Co (up to 0.16%, averaging 0.02%), poor in Au and Ag (0.3 and 7.2 ppm, respectively), and almost free of Pb and Ba.All the rocks and ores experienced epidote–amphibolitic metamorphism. Meanwhile, the ores experienced a recrystallization and partial regeneration, but the initial shape of the lodes remained unchanged.The essentially chalcopyritic ores, the volcaniclastic ore-bearing rocks, and the spatial and genetic relationship of the mineralization with undifferentiated mafic and siliciclastic rocks suggest that this deposit belongs to the Besshi type, formed in a back-arc environment, near large rises.The studies show that Besshi-type Cu–Zn massive sulfide deposits differ from most of the polymetallic (Kuroko-type) deposits in Rudny Altai in the composition of volcanics and geodynamic settings, but belong to the same evolutionary series in this VMS province. Both types of deposits might have formed in the Paleozoic, during the main peak of VMS generation in the Earth's history. 相似文献
19.
《Resource Geology》2018,68(3):258-274
The Dabaoshan deposit in Northern Guangdong Province, South China, is a Cu–Mo–W–Pb–Zn polymetallic deposit, located in the southern part of the Qin–Hang porphyry–skarn Cu–Mo ore belt. The deposit mainly comprises porphyry Mo and stratiform skarn Cu ore deposits. The genesis of the Cu ore deposit has been ascribed to a typical skarn ore deposit formed by the metasomatism of Devonian carbonate rock layers or to a volcanic rock‐hosted massive sulfide deposit formed by marine exhalation. In this paper, we report on the homogenization temperatures and salinities of fluid inclusions and C, H, O, S, and Pb isotopic compositions of fluids and minerals in this deposit. Homogenization temperatures and salinities of fluid inclusions in garnet, diopside, quartz, and calcite provide information on the skarnification, mineralization, and postmineralization stages. The data show that ore‐forming fluids experienced a continuous transition from high temperatures and salinities to low temperatures and salinities over the entire period of mineralization. C, H, and O isotopic compositions indicate that ore‐forming fluids were derived mainly from magmatic water. O isotopic compositions indicate that ore‐forming fluids mingled with atmospheric water during the last stage of mineralization. Sulfur in the ore came mainly from deep magmatic sources. Pb isotopic compositions in the orebody show that almost all the lead in the ore was derived from magma with a crustal source. Combined geological, geophysical, and geochemical data were achieved before we proposed that the Dabaoshan porphyry–skarn Cu–Mo–W–Pb–Zn deposit, as one member of the Qin–Hang porphyry–skarn Cu–Mo ore belt, formed during the Jurassic subduction of the paleo‐Pacific plate beneath the Eurasian continent at quite low angle. NE‐ and EW‐trending structures controlled the emplacement of magmatic rocks in the South China region. In the mining area, the Xiangguanping Fault and its branches were the main conduits for magmatic crystallization and mineralization. The many subfaults, folds, and interlayer fracture zones on both sides of the main fault provided the requisite space for the ore and, together, were the controlling structures of the orebody. 相似文献
20.
巴布亚新几内亚地质构造格架复杂,包括地台、碰撞造山带、外来地体、俯冲带、岛弧和海底扩张中心。巴布亚新几内亚铜金矿床类型主要为斑岩型铜金矿床、浅成低温热液型金银矿床和夕卡岩型铜金矿床（三者之间具有密切的时间、空间和成因关系）,其次为海底块状硫化物矿床。铜金矿床分布比较集中,主要产出于碰撞造山带和岛弧上,其次产出于现代海底扩张中心。铜金矿床大多规模巨大或较大,埋藏较浅,易于勘探和适合露天开采。与铜金矿床有关的岩浆岩大多为钙碱性火山岩和浅成侵入岩,少数与富钾碱性火山岩（橄榄玄粗岩）或侵入岩伴生。铜金矿床蚀变带发育且分带性明显,大多与斑岩体系和／或火山机构有关。虽然许多铜金矿床的矿物成分比较复杂,但是其矿石较易处理和利用。 相似文献