首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
v--vRegional crustal waveguide calibration is essential to the retrieval of source parameters and the location of smaller (M < 4.8) seismic events. This path calibration of regional seismic phases is strongly dependent on the accuracy of hypocentral locations of calibration (or master) events. This information can be difficult to obtain, especially for smaller events. Generally, explosion or quarry blast generated travel-time data with known locations and origin times are useful for developing the path calibration parameters, but in many regions such data sets are scanty or do not exist. We present a method which is useful for regional path calibration independent of such data, i.e. with earthquakes, which is applicable for events down to Mw = 4 and which has successfully been applied in India, central Asia, western Mediterranean, North Africa, Tibet and the former Soviet Union. These studies suggest that reliably determining depth is essential to establishing accurate epicentral location and origin time for events. We find that the error in source depth does not necessarily trade-off only with the origin time for events with poor azimuthal coverage, but with the horizontal location as well, thus resulting in poor epicentral locations. For example, hypocenters for some events in central Asia were found to move from their fixed-depth locations by about 20 km. Such errors in location and depth will propagate into path calibration parameters, particularly with respect to travel times. The modeling of teleseismic depth phases (pP, sP) yields accurate depths for earthquakes down to magnitude Mw = 4.7. This Mw threshold can be lowered to four if regional seismograms are used in conjunction with a calibrated velocity structure model to determine depth, with the relative amplitude of the Pnl waves to the surface waves and the interaction of regional sPmP and pPmP phases being good indicators of event depths. We also found that for deep events a seismic phase which follows an S-wave path to the surface and becomes critical, developing a head wave by S to P conversion is also indicative of depth. The detailed characteristic of this phase is controlled by the crustal waveguide. The key to calibrating regionalized crustal velocity structure is to determine depths for a set of master events by applying the above methods and then by modeling characteristic features that are recorded on the regional waveforms. The regionalization scheme can also incorporate mixed-path crustal waveguide models for cases in which seismic waves traverse two or more distinctly different crustal structures. We also demonstrate that once depths are established, we need only two-stations travel-time data to obtain reliable epicentral locations using a new adaptive grid-search technique which yields locations similar to those determined using travel-time data from local seismic networks with better azimuthal coverage.  相似文献   

2.
A wide range of stoichiometries has been previously proposed for soluble iron sulfide species and there is no general agreement on their importance in natural waters. The solubility of Fe(II) in 0.1 M NaClO4 equilibrated at 20 - 0.1°C with various partial pressures of H2S (0.1, 0.001, 0.0001, 0.00001 MPa) was measured in the pH range 3.1-7.9. Equilibrium was established within 1-6 h when amorphous FeS was the solid phase. The results could all be fitted using values for the solubility product constant (I = 0) of p*Ks = 3.00 - 0.12 and of the stability constant for a soluble Fe(HS) 2 species (I = 0) of p#2 = -6.45 - 0.12 where *Ks = aFe2+ · aHS-/aH+ and #2 = aFe(HS) 2/aFe2+ · (aHS-)2. Any soluble species of the form Fex (HS) 2x where x = &gif1; would fit the data equally well. Measurements at different partial pressures are inconsistent with labile species of the form FexSx. There was no evidence for a Fe(HS) + species. When a solution is saturated with respect to amorphous FeS, Fe(HS) 2 will only be a significant proportion of Fe(II) when S(-II) is higher than 0.2mmoll-1. The constants for Fe(HS) 2 or Fex (HS) 2x (x S 2) are consistent with all freshwater data where constant values of measured ion activity products provide no evidence for soluble complex formation. For marine waters with high sulfide concentrations (S 6mmol l-1), measured concentrations of Fe(II) are consistent with there being negligible soluble iron sulfide. The data are better fitted if the dissolved species are polymeric as predicted concentrations of the monomer Fe(HS) 2 are significant. These findings suggest that rather than the dissolved species being Fe(HS) 2, it is probably polymeric, that is Fex (HS) 2x (x S 2).  相似文献   

3.
The relationship between photosynthesis and irradiance was investigated in a strain of the cyanobacterium Planktothrix rubescens isolated from Lake Zürich, using cultures grown on a 12:12-h light-dark cycle. From the photosynthesis-irradiance (P/I) curves, values of the light-affinity coefficient, f, and the maximum rate of photosynthesis, Pm, were determined: in different cultures f ranged from 0.02-0.08 7mol mg-1 h-1 (7mol m-2 s-1)-1 and Pm from 0.6-2.6 7mol mg-1 h-1 (rates of O2 production related to dry biomass). Comparisons made at different phases of the light-dark cycle in individual cultures showed that in the first hour of the light phase f rose by an average of 21 % and Pm by 7 %. In cultures that had been grown in many light-dark cycles, however, the rise occurred only if light was given at the beginning of the notional light phase; cultures kept in darkness showed no rise. It is concluded that the observed increases in f and Pm after dawn were in response to the exogenous irradiance rather than due to endogenous rhythms. These findings are discussed in relation to diel variations in the photosynthetic coefficients of natural populations of P. rubescens in Lake Zürich.  相似文献   

4.
-- The main active faults of the Granada Basin are located in its central-eastern sector, where the most important tectonic activity is concentrated, uplifting its eastern part and sinking the western border. Several parameters related to the seismic potentiality of these active, or in some cases probably active, faults in this basin are used for the first time. Many of these faults can generate earthquakes with magnitudes larger than 6.0 MW, although this is not the general case. The fault situated to the N of Sierra Tejeda, probably the one responsible for the big earthquake of 25/12/1884, stands out, because it could generate an earthquake with magnitude 6.9 MW. Although at present all the data needed are not fully known, we consider that the final results show, as a whole, the average expected return periods of the faults in the Granada Basin.  相似文献   

5.
-- The study addresses the evaluation of earthquake hazard parameters such as maximum regional magnitude (Mmax) and the slope of Gutenberg-Richter law # (where b=# log e) for the Hellenic Wadati-Benioff zone and the overriding lithospheric plate in the area of Crete and its surroundings. The seismicity of the area is divided in a cellular (1.0° 2 1.0°) manner allowing analysis of the localized earthquake hazard parameters and graphical representation of their spatial variation. Our approach incorporates the recently updated earthquake catalogue for Greece and the adjacent areas, the consideration of the morphology of the deep seismically active structures in the studied area and use of a probabilistic procedure for estimating the earthquake hazard parameters.¶One of the main inconsistencies in the earthquake hazard assessment is the estimation of the maximum magnitude and the related uncertaint y. The Bayesian approach, applied in the present, is a straightforward technique for evaluating the earthquake hazard parameters and is based on the following assumptions: Poissonian character of seismic events flow, a frequency-magnitude law of Gutenberg-Richter's type with cutoff maximal value for estimated parameter and a seismic catalogue, having a rather sizeable number of events (i.e., 50 events at least per cell). For five cells in which the number of events is less than 50, an effort is made to produce synthetic data. The re-assessed parameters obtained from the synthetic data show no significant difference and the real data (of the five cells) are finally taken into account although the estimated uncertainty is high.¶For four random cells we constructed hazard curves showing the probabilities that a certain magnitude M will be exceeded in one year and the return periods (in years) that are expected for a given magnitude. These are particularly useful for the mapping of earthquake hazard in regions of either low or high seismic activity, as is Crete and the adjacent area.¶The obtained results show that the W and E parts of both subducting and overriding plates differ in the spatial distribution of all the estimated earthquake hazard parameters. The Mmax distribution indicates strong coupling between the western portions of the interacting plates (Mmax > 6.3) to the south of 36°N. The smaller values of Mmax (Mmax < 6.3) estimated in the SE part of the studied area indicate weak coupling between the eastern portions of the subducting and overriding plates.¶Values of b > 1.0 are found to the south and east of Crete for the Wadati-Benioff zone, and over the central part of the island and the area to the northeast of it (cell 11) for the continental wedge, which suggests nonuniform stress field and/or heterogeneous material.  相似文献   

6.
-- We propose a thermal-mechanical model of shear deformation of a viscoelastic material to describe the temperature-dependence of friction law. We consider shear deformation of one-dimensional layer composed of a Maxwell linear viscoelastic material under a constant velocity V and temperature Tw at the boundary. The strain rate due to viscous deformation depends both on temperature and shear stress. The temperature inside the layer changes owing to frictional heating and conductive cooling. Steady-state calculations show that the sign of d†ss/dV, where †ss is steady-state stress, changes from positive to negative as V increases, and that the threshold velocity above which the sign of d†ss/dV is negative increases with increasing Tw. These results are in accordance with the conjecture that the downdip limit of seismogenic zones is marked by the transition in the sign of d†ss/dV due to temperature rise with depth. We also find that the response of steady state to a step change in V is quite similar to the response of frictional slip with constitutive laws which employ state variables. These findings suggest that by further improving the present model a model of constitutive relations along faults or plate boundaries can be developed which contains temperature-dependence in a physically-sound manner.  相似文献   

7.
A multi-parametric study of empirical relationships between macroseismic data and magnitude is presented for the Italian region by the analysis of a new extended data set concerning 146 earthquakes. The available magnitude determinations include all of the most intense earthquakes which occurred in Italy in the last century and have been obtained by an accurate revision of original instrumental data. Intensity data have been revised and upgraded on the basis of the most recent studies: only local intensities directly documented have been used. Macroseismic determinations ofM s ,m B andM wa magnitudes have been performed. The empirical relationships between maximum felt intensity (I max ) and magnitude have been determined by the use of a distribution-free approach and a linear regression analysis. This last parameterization allows for the explanation of more than 60% of the variation in magnitude. In order to improve these results, the linear dependence between magnitude,I max and average distances (in logarithm) corresponding to fixed attenuation values has been explored. The comparison between instrumental magnitudes and corresponding macroseismic estimates obtained from empirical relationships shows that the respective uncertainties are comparable.  相似文献   

8.
v--v Continuous seismic threshold monitoring is a technique that has been developed over the past several years to assess the upper magnitude limit of possible seismic events that might have occurred in a geographical target area. The method provides continuous time monitoring at a given confidence level, and can be applied in a site-specific, regional or global context.¶In this paper (Part 1) and a companion paper (Part 2) we address the problem of optimizing the site-specific approach in order to achieve the highest possible automatic monitoring capability of particularly interesting areas. The present paper addresses the application of the method to cases where a regional monitoring network is available. We have in particular analyzed events from the region around the Novaya Zemlya nuclear test site to develop a set of optimized processing parameters for the arrays SPITS, ARCES, FINES, and NORES. From analysis of the calibration events we have derived values for beam-forming steering delays, filter bands, short-term average (STA) lengths, phase travel times (P and S waves), and amplitude-magnitude relationships for each array. By using these parameters for threshold monitoring of the Novaya Zemlya testing area, we obtain a monitoring capability varying between mb 2.0 and 2.5 during normal noise conditions.¶The advantage of using a network, rather than a single station or array, for monitoring purposes becomes particularly evident during intervals with high global seismic activity (aftershock sequences), high seismic noise levels (wind, water waves, ice cracks) or station outages. For the time period November-December 1997, all time intervals with network magnitude thresholds exceeding mb 2.5 were visually analyzed, and we found that all of these threshold peaks could be explained by teleseismic, regional, or local signals from events outside the Novaya Zemlya testing area. We could therefore conclude within the confidence level provided by the method, that no seismic event of magnitude exceeding 2.5 occurred at the Novaya Zemlya test site during this two-month time interval.¶As an example of particular interest in a monitoring context, we apply optimized threshold processing of the SPITS array for a time interval around 16 August 1997 mb 3.5 event in the Kara Sea. We show that this processing enables us to detect a second, smaller event from the same site (mb 2.6), occurring about 4 hours later. This second event was not defined automatically by standard processing.  相似文献   

9.
--Extensive hydrogeological, geochemical, radiometric and hydro-isotope investigations in the Vogtland region, Germany, since 1989 suggest a fluid connection between a special epicentral area (focal depth: 3-15 km; ML < 5) and a mineral spring at Bad Brambach. Twenty-six hydrogeochemical anomalies are related to earthquakes/swarmquakes of that epicentral area near Novy Kostel (CZ) during the last 9 years. The anomalies were originated by a slug-flow process in the fluid-filled fracture system near the surface. The gas component of the observed fluid (99 vol. % CO2) is of upper mantle/crustal origin. The fluid transport pathway to the surface is the seismically active Mariánské Lázné fault zone. The interpretation suggests an influence of the fluid system due to earthquake preparation processes.  相似文献   

10.
-- On a plexiglass sample, a penetrating crack was prefabricated by laser. The crack is inclined towards the major principal stress †1(†y) at an angle of about 30°. Using this sample and by means of shadow optical method of caustics and microcrack location, the process zone, nucleation zone and plastic area of earthquakes were studied experimentally, and the strain variation in the shadow area was monitored. From the result, we comprehend the following. When the stress †y was increased to a certain value, shadow areas were formed around the prefabricated crack and at its tips, with that at the tips being larger. These shadow areas become larger with the increase of load and smaller with unloading. In the shadow area the strain was inhomogeneous: it was very large in some places but very small in others. When the shadow area reached a critical state, microcracks appeared at the tips of the prefabricated crack. Microcracks appeared on one side of the prefabricated crack where the strain and the shadow were both smaller. The zone with concentrated microcracks, or the process zone, was always located at the crack tip; this zone together with a half length of the original crack formed the nucleation zone which fell into the shadow area but was smaller than it. The shadow optical area of caustics bears a certain quantitative relation with the plastic area. Therefore, if an appropriate method is available to obtain the shadow optical area of caustics, it would be possible to detect the area with strong differential deformation change, and hence to determine the zone where strong fracture (an earthquake) would take place.  相似文献   

11.
--We have examined the digital waveform data and relocated a number of events within the June 1987 earthquake swarm, which occurred beneath the northern part of Lake Aswan, 70 km southwest of the Aswan High Dam in Egypt. This swarm occurred between June 17th and 19th with a maximum magnitude event of "ML"=3.5.¶Cross correlation between a chosen master and the analyzed events has been carried out on seismograms from stations of the Aswan network. The cross correlation demonstrates the presence of a difference in both the P wave ((tp) and the S wave ((ts) arrival times at each station in the network relative to the arrival times of the master event at the same stations. (tp ranges between т.15 and 0.11 second, while (ts ranges between т.17 and 0.11 second.¶The primary interpretation is that the se time differences represent an error in the manually picking arrival times. Then, (tp and (ts values for each event result from a change in the hypocentral parameters from those of the master event, assuming the P- and S-wave velocity distribution remains constant during the swarm activity. This interpretation enables us to determine the relative distribution of hypocenters with respect to the hypocentral location of the master event. We present the results from a swarm of 9 events demonstrating they originate from a nearly unique location, rather than the zone identified from the preliminary locations which used manually picked onset times.  相似文献   

12.
Water quality, physical habitat, and fisheries at sixteen reaches in the Neversink River Basin were studied during 1991-95 to identify the effects of acidic precipitation on stream-water chemistry and on selected fish-species populations, and to test the hypothesis that the degree of stream acidification affected the spatial distribution of each fish-species population. Most sites on the East Branch Neversink were strongly to severely acidified, whereas most sites on the West Branch were minimally to moderately acidified. Mean density of fish populations ranged from 0 to 2.15 fish/m2; biomass ranged from 0 to 17.5 g/m2. Where brook trout were present, their population density ranged from 0.04 to 1.09 fish/m2, biomass ranged from 0.76 to 12.2 g/m2, and condition (K) ranged from 0.94 to 1.07. Regression analyses revealed strong relations (r2 - 0.41 to 0.99; p h 0.05) between characteristics of the two most common species (brook trout and slimy sculpin) populations and mean concentrations of inorganic monomeric aluminum (Alim), pH, Si, K+, NO3-, NH4+, DOC, Ca2+, and Na+; acid neutralizing capacity (ANC); and water temperature. Stream acidification may have adversely affected fish populations at most East Branch sites, but in other parts of the Neversink River Basin these effects were masked or mitigated by other physical habitat, geochemical, and biological factors.  相似文献   

13.
With the central part of Shanxi Province as an example, this paper studied seismic intensity zonation directly by use of the response intensity of historical earthquakes. From the result, some conclusions can be drawn as follows: (1) For areas rich in data of historical earthquakes, the seismic intensity zonation map with probabilistic meanings can be compiled by use of the statistical features of the response intensity of sites; (2) When determining the length of time for statistics, the completeness of response intensity data and the inhomogeneity of regional seismic activities should be fully considered; (3) By comparing the seismic intensity zonation result for recurrence interval of 500 years with the new Seismic Intensity Zonation Map of China (1990), it has been found that the two are roughly similar; though they are somewhat different for some localities, each has its own reasonableness.  相似文献   

14.
--In this comprehensive study of seismicity and seismotectonics of the peninsular Indian shield region, seismic data of regional earthquakes spanning two decades (1978-1997), obtained at Gauribidanur seismic array (India) and integrated where necessary with data from other seismological stations in the region, have been analyzed in detail. With a slow rate of stress accumulation, the shield is found to have low to moderate seismicity that takes into account a couple of earthquakes of magnitude slightly larger than 6. The frequency-magnitude analysis of the data set gives a b value of 1.18. The spatio-temporal pattern of occurrences of the earthquakes combined with their magnitude and seismic energy distribution is consistent with the view that the peninsular seismicity is low to moderate and episodic in nature. Regions of moderate seismicity and its low-grade counterpart constituted by microearthquakes (magnitude less than 3), appear correlated to the areas traversed by known geologic faults and subfaults, shear zones, and other such tectonic features. Microearthquakes represent about two-thirds of the total regional seismic events during the past two decades.  相似文献   

15.
v--vThis second paper (Part 2) pertaining to optimized site-specific threshold monitoring addresses the application of the method to regions covered by a teleseismic or a combined regional-teleseismic network. In the first paper (Part 1) we developed the method for the general case, and demonstrated its application to an area well-covered by a regional network (the Novaya Zemlya nuclear test site). In the present paper, we apply the method to the Indian and Pakistani nuclear test sites, and show results during the periods of nuclear testing by these two countries in May 1998. Since the coverage by regional stations in these areas is poor, an optimized approach requires the use of selected, high-quality stations at teleseismic distances.¶To optimize the threshold monitoring of these test sites, we use as calibration events either one of the nuclear explosions or a nearby earthquake. From analysis of the calibration events we derive values for array beamforming steering delays, filter bands, short-term averages (STA) lengths, phase travel times (P waves), and amplitude-magnitude relationships for each station. By applying these parameters, we obtain a monitoring capability of both test sites ranging from mb 2.8-3.0 using teleseismic stations only. When including the nearby Nilore station to monitor the Indian tests, we show that the threshold can be reduced by about 0.4 magnitude units. In particular, we demonstrate that the Indian tests on 13 May, 1998, which were not detected by any known seismic station, must have corresponded to a magnitude (mb) of less than 2.4.¶We also discuss the effect of a nearby aftershock sequence on the monitoring capability for the Pakistani test sites. Such an aftershock sequence occurred in fact on the day of the last Pakistani test (30 May, 1998), following a large (mb 5.5) earthquake in Afghanistan located about 1100 km from the test site. We show that the threshold monitoring technique has sufficient resolution to suppress the signals from these interfering aftershocks without significantly affecting the true peak of the nuclear explosion on the threshold trace.  相似文献   

16.
In the process of updating existing PSHA maps in Central Asia, a first step is the evaluation of the seismic hazard in terms of macroseismic intensity by applying a data driven method. Following the Site Approach to Seismic Hazard Assessment (SASHA) [11], the evaluation of the probability of exceedance of any given intensity value over a fixed exposure time, is mainly based on the seismic histories available at different locations without requiring any a-priori assumption about seismic zonation. The effects of earthquakes not included in the seismic history can be accounted by propagating the epicentral information through a Intensity Prediction Equation developed for the analyzed area. In order to comply with existing building codes in the region that use macroseismic intensity instead of PGA, we evaluated the seismic hazard at 2911 localities using a macroseismic catalog composed by 5322 intensity data points relevant to 75 earthquakes in the magnitude range 4.6–8.3. The results show that for most of the investigated area the intensity having a probability of at least 10% to be exceeded in 50 years is VIII. The intensity rises to IX for some area struck by strong earthquakes in the past, like the Chou-Kemin-Chilik fault zone in northern Tien-Shan, between Kyrgyzstan and Kazakhstan, or in Gissar range between Tajikistan and Uzbekistan. These values are about one intensity unit less than those evaluated in the Global Seismic Hazard Assessment Program (GSHAP; Ulomov, The GSHAP Region 7 working group [29]). Moreover, hazard curves have been extracted for the main towns of Central Asia and the results compared with the estimates previously obtained. A good agreement has been found for Bishkek (Kyrgyzstan) and Dushanbe (Tajikistan), while a lower probability of occurrence of I=VIII has been obtained for Tashkent (Uzbekistan) and a larger one for I=IX in Almaty (Kazakhstan).  相似文献   

17.
地震灾害发生后,可根据地震烈度衰减关系,利用地震灾害快速评估系统初步评估烈度分布范围。为评定烈度分布结果的偏差特性,利用中国西部地区488个震例和中国东部地区182个震例的等震线数据,使用Levenberg-Marquardt非线性迭代算法进行回归,计算我国大陆分区域烈度衰减关系,并对中国大陆1990—2007年23次6.0级以上地震以及2008—2019年88次5.0级以上地震进行烈度评估。结果发现,应用本研究所得烈度衰减关系进行烈度评估,不同烈度区分布面积与实际震害面积存在一定偏差,体现在:①高烈度区:实际震害面积往往比模型面积偏大;②低烈度区:实际震害面积往往比模型面积偏小。据此提出,应用该烈度衰减关系估计震害面积时,应根据烈度大小适当放大或缩写模型面积,具体缩放度如下:8度区模型面积放大约1.5—2.0倍,7度区模型面积缩小约1.5—1.6倍,6度区模型面积缩小约1.8—2.0 倍。  相似文献   

18.
Summary Statistical information on the number of earthquakes felt in Zagreb, Yugoslavia, during the 100 year period 1869–1968 is given and their distribution in time is shown. The largest earthquake in each year is analysed, first by the distribution-free method and then by means of the theory of extremes afterJenkinson. By the latter method we conclude that there is an upper limit to the possible intensity of earthquakes in Zagreb. The results are compared with the data for Californial although the seismicity of Zagreb area is rather high, that of California is considerably higher.  相似文献   

19.
中国大陆强震灾害范围的统计研究   总被引：1，自引：0，他引：1  
王健  张晓东 《中国地震》1998,14(3):26-31
强震的灾害范围是非常重要的地震学参数,它在地震灾害快速评估,地震保险及防震减灾等方面有着广泛的应用。本文全面,系统地收集了中国大陆宏观等震线资料,对没有地理坐标的等震线进行了数字化。精确计算了从１３０３年至１９９４年共１８３次强震的灾害范围,并对误差因素进行了分析。  相似文献   

20.
关于"一致"地震动衰减规律的探讨   总被引：1，自引：1，他引：0  
以我国中南地区烈度资料为例,用卡方正交回归烈度和震级的联合椭圆衰减模型,研究了烈度和震级相互转换的一致性问题,给出适合该地区的“一致”地震动衰减关系,并与常规方法得到的最小二乘结果进行比较,结果较为合理。该方法也可用于预测不同地区其它地震动参数衰减关系。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号