首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
In contrast to blue amphiboles of the Ossa and Olympos tectonic windows in Thessaly, detrital blue amphiboles in Paleocene flysch deposits in the western Othrys Mountain (Pelagonian Zone s.l.) are chemically comparable with blue amphiboles from the Cyclades. For the detrital material, therefore, a source with "Cycladic" chemical affinities is assumed. The occurrence of these detrital minerals is in line with a Cretaceous onset of blueschist facies metamorphism in parts of the Hellenides, especially in the Cycladic belt. This was in response to Cretaceous subduction of the Pindos oceanic plate along the external margin of the Pelagonian micro-continent. Blueschist complexes were exhumed latest in the Paleocene when the terrigenous flysch sedimentation started in the Pelagonian and Pindos zones.  相似文献   

2.
Crete consists of a nappe pile that formed during Alpine subduction and collision. The lower nappes belong to the External Hellenides, whereas the uppermost nappe is ascribed to the Pelagonian Zone of the Internal Hellenides. The Uppermost Unit consists of several subunits including the Asterousia Crystalline Complex (ACC), which comprises metasedimentary rocks, (meta)granitoids and serpentinite, the protolith age and the tectonometamorphic evolution of which are largely unknown. In the present study, we present new structural, microfabric and geochronological data from the Uppermost Unit in the Melambes area (central Crete). 206Pb/238U zircon ages (LA-ICP-MS and ID-TIMS) indicate granitic and dioritic intrusions between 71.9 ± 0.6 and 76.9 ± 0.3 Ma. Identical ages have previously been obtained from comparable intrusions in eastern Crete and on Anafi. The composition and geochemical signature suggest an extended magmatic arc along the southern active margin of the Pelagonian-Lycian Block. Post-intrusive shearing transformed granite into orthogneiss, whereas diorite remained free from foliation, because of the lower amount of mechanically weak phases. Deformation microfabrics suggest top-to-the SE shearing under amphibolite facies conditions of the ACC and at greenschist facies conditions of rocks at the base of the ACC referred to as Akoumianos Greenschist. The Akoumianos Greenschist is considered as the northern part of the Pindos realm that was subducted underneath the Pelagonian-Lycian active margin. Based on our new and on published data, the following orogenic stages are suggested to have contributed to the evolution of the Hellenides during the Late Cretaceous to Eocene: (1) pre-middle Campanian collision and subduction of the Pindos lithosphere underneath the southern margin of the Pelagonian-Lycian terrane led to obduction and offscraping of serpentinized ocean floor and stacking of the ACC during amphibolite facies top-to-the SE thrusting, (2) formation of a Campanian magmatic arc along the Pelagonian-Lycian active margin; (3) Maastrichtian collision and stacking of the magmatic arc during top-to-the SE mylonitic shearing; (4) Palaeocene top-to-the SE greenschist-facies shearing of the ACC on top of the Akoumianos Greenschist; (5) Late Eocene thrusting of the Uppermost Unit on top of the Arvi and Pindos units. Thus, top-to the SE was the dominant shear sense in the southern Aegean from at least the mid-Late Cretaceous until the Eocene.  相似文献   

3.
In the central Aegean, the Cycladic island of Amorgos consists of two high‐pressure (HP) units, the marble‐rich Amorgos unit, which is correlated to the Mesozoic ‘cover’ sequence of the Menderes Massif, and the Cycladic Blueschist unit. New structural data show that the deformation history of the Amorgos HP‐rocks was principally governed by early Oligocene (or late Eocene)–early Miocene ductile to brittle thrusting (D1–D3) followed by middle–late Miocene oblique contractional movements (D4–D5). The D1 phase caused syn‐blueschist‐facies ductile thrusting of the Cycladic Blueschist unit over the Amorgos unit, with ambiguous kinematics. Progressive deformation under continuous NW–SE compression produced a sequence of imbricate NW‐directed thrusts (D2/3) characterized by a stratification of fault‐related rocks, with mylonitic zones (D2) giving way downwards to cataclastic zones (D3). Ductile D2 thrusting synchronous to greenschist‐facies retrogression, was accompanied by mega‐sheath folding during constrictional and general shear deformation. Brittle D3 thrusting was associated with NW‐verging F3 folds trending at a high‐angle to the transport direction. Orthogonal contraction gave way to transpression during which the compression orientation changed from NW–SE (D4) to NE–SW (D5). Back‐arc related NW–SE pure extension (D6) seems to have been established in post‐late Miocene times and related high‐angle normal faulting affected HP‐rocks only after they had already reached the uppermost crustal levels. Oligocene–early Miocene deformation history is interpreted to indicate syn‐compressional exhumation of HP‐rocks possibly in an extrusion wedge. In this case, Amorgos HP‐rocks should have occupied the base of the extrusion wedge. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

4.
The Aegean Sea area is thought to be an actively extending back-arc region, north of the present day Hellenic volcanic arc and north-dipping subduction zone in the Eastern Mediterranean. The area shows extensive normal faulting, ductile ‘extensional’ shear zones and extensional S-C fabrics throughout the islands that have previously been related to regional Aegean extension associated with slab rollback on the Hellenic Subduction Zone. In this paper, we question this interpretation, and suggest the Cenozoic geodynamic evolution of the Aegean region is associated with a Late Cretaceous–Eocene NE-dipping subduction zone that was responsible for continent-continent collision between Eurasia and Adria-Apulia/Cyclades. Exhumation of eclogite and blueschist facies rocks in the Cyclades and kyanite-sillimanite grade gneisses in the Naxos core complex have pressures that are far greater than could be accounted for purely by lithospheric extension and isostatic uplift. We identify four stages of crustal shortening that affected the region prior to regional lithospheric extension, herein called the Aegean Orogeny. This orogeny followed a classic Wilson cycle from early ophiolite obduction (ca. 74 Ma) onto a previously passive continental margin, to attempted crustal subduction with HP eclogite and blueschist facies metamorphism (ca. 54–45 ?Ma), through crustal thickening and regional kyanite – sillimanite grade Barrovian-type metamorphism (ca. 22–14 ?Ma), to orogenic collapse (<14 ?Ma). At least three periods of ‘extensional’ fabrics relate to: (1) Exhumation of blueschists and eclogite facies rocks showing tight-isoclinal folds and top-NE, base-SW fabrics, recording return flow along a subduction channel in a compressional tectonic setting (ca. 50–35 ?Ma). (2) Extensional fabrics within the core complexes formed by exhumation of kyanite- and sillimanite gneisses showing thrust-related fabrics at the base and ‘extensional’ fabrics along the top (ca. 18.5–14 ?Ma). (3) Regional ductile-brittle ‘extensional’ fabrics and low-angle normal faulting related to the North Cycladic Detachment (NCD) and the South(West) Cycladic Detachment (WCD) during regional extension along the flanks of a major NW–SE anticlinal fold along the middle of the Cyclades. Major low-angle normal faults and ductile shear zones show symmetry about the area, with the NE chain of islands (Andros, Tinos, Mykonos, Ikaria) exposing the NE-dipping NCD with consistent top-NE ductile fabrics along 200 ?km of strike. In contrast, from the Greek mainland (Attica) along the SE chain of islands (Kea, Kythnos, Serifos) a SW-dipping low-angle normal fault and ductile shear zone, the WCD is inferred for at least 100 ?km along strike. Islands in the middle of the Cyclades show deeper structural levels including kyanite- and sillimanite-grade metamorphic core complexes (Naxos, Paros) as well as Variscan basement rocks (Naxos, Ios). The overall structure is an ~100 ?km wavelength NW–SE trending dome with low-angle extensional faults along each flank, dipping away from the anticline axis to the NE and SW. Many individual islands show post-extensional large-scale folding of the low-angle normal faults around the domes (Naxos, Paros, Ios, Sifnos) indicating a post-Miocene late phase of E–W shortening.  相似文献   

5.
The Arpont-Parrachée region in the southern Vanoise massif comprises a stack of minor fold- and thrust-nappes that were emplaced during subduction and closure of the Piémont ocean basin in Late Cretaceous to Eocene time. The stack includes the Arpont nappe, composed mainly of pre-Permian schist metamorphosed to blueschist facies early in the Alpine history, and several sheets of Permian to Eocene metasedimentary rocks. Nappe formation, recumbent folding, and associated ductile deformation postdated the high-pressure metamorphic peak, and probably involved translation to the northwest. The rocks were then refolded by large- and small-scale folds trending roughly E-W. These deformational events were accompanied by a decrease in metamorphic pressure, indicating uplift. They were followed by regional greenschist-facies metamorphism, which caused breakdown of high-pressure parageneses, annealing of microstructures, and widespread growth of albite porphyroblasts. The entire nappe pile was then refolded by large- and small-scale folds overturned towards the southeast. Reorientation of small-scale structures with increasing strain by this event indicates a large component of ESE-directed shear, which culminated in the formation of anastomosing ductile shear-zones.  相似文献   

6.
A blueschist facies tectonic sliver, 9 km long and 1 km wide, crops out within the Miocene clastic rocks bounded by the strands of the North Anatolian Fault zone in southern Thrace, NW Turkey. Two types of blueschist facies rock assemblages occur in the sliver: (i) A serpentinite body with numerous dykes of incipient blueschist facies metadiabase (ii) a well‐foliated and thoroughly recrystallized rock assemblage consisting of blueschist, marble and metachert. Both are partially enveloped by an Upper Eocene wildflysch, which includes olistoliths of serpentinite–metadiabase, Upper Cretaceous and Palaeogene pelagic limestone, Upper Eocene reefal limestone, radiolarian chert, quartzite and minor greenschist. Field relations in combination with the bore core data suggest that the tectonic sliver forms a positive flower structure within the Miocene clastic rocks in a transpressional strike–slip setting, and represents an uplifted part of the pre‐Eocene basement. The blueschists are represented by lawsonite–glaucophane‐bearing assemblages equilibrated at 270–310 °C and ～0.8 GPa. The metadiabase dykes in the serpentinite, on the other hand, are represented by pumpellyite–glaucophane–lawsonite‐assemblages that most probably equilibrated below 290 °C and at 0.75 GPa. One metadiabase olistolith in the Upper Eocene flysch sequence contains the mineral assemblage epidote + pumpellyite + glaucophane, recording P–T conditions of 290–350 °C and 0.65–0.78 GPa, indicative of slightly lower depths and different thermal setting. Timing of the blueschist facies metamorphism is constrained to c. 86 Ma (Coniacian/Santonian) by Rb–Sr phengite–whole rock and incremental 40Ar–39Ar phengite dating on blueschists. The activity of the strike–slip fault post‐dates the blueschist facies metamorphism and exhumation, and is only responsible for the present outcrop pattern and post‐Miocene exhumation (～2 km). The high‐P/T metamorphic rocks of southern Thrace and the Biga Peninsula are located to the southeast of the Circum Rhodope Belt and indicate Late Cretaceous subduction and accretion under the northern continent, i.e. the Rhodope Massif, enveloped by the Circum Rhodope Belt. The Late Cretaceous is therefore a time of continued accretionary growth of this continental domain.  相似文献   

7.
Mylonitic structures related to two orogenic events are described from the upper and lower contacts of the Combin zone and the immediately overlying upper Austroalpine Dent Blanche nappe/Mont Mary klippe and the directly underlying lower Austroalpine Etirol-Levaz slice. The first event, Late Eocene in age, commenced during blueschist facies P-T conditions, but pre-dated the peak of subsequent greenschist facies overprint. The second event, Early Oligocene in age, took place during retrograde greenschist facies conditions. Most sense of shear indicators associated with the retrograde mylonites indicate top SE shearing, but subordinate top NW displacing shear sense indicators have also been mapped. Mylonitic top SE shearing appears to be restricted to the Combin zone and its upper and lower contacts. Within the Dent Blanche nappe and Mont Mary klippe and at the base of the Etirol-Levaz slice, structures were observed which developed during blueschist/greenschist facies conditions and are, in conjunction with the P-T-t history of these rocks, inferred to be older. Associated kinematic data indicate a top NW shear sense. Comparable blueschist/greenschist facies shear sense indicators have not been observed in the Combin zone. Nonetheless, the foliation in the Combin zone shows a progressive evolution from blueschist facies to greenschist facies to retrograde greenschist facies conditions. This indicates that the Combin zone and the immediately over- and underlying Austroalpine units shared a common tectono-metamorphic evolution since the Late Eocene. Finite strain data reveal oblate strain fabrics, which are thought to result from a true flattening strain geometry. Flow path modelling reveals a general non-coaxial deformation régime and corroborates significant departures from a simple shear deformation. In the study area, mylonitic top SE shearing in the Combin zone is attributed to Early Oligocene backfolding and backthrusting of the Mischabel phase. Temperature-time curves suggest slight reheating in the Monte Rosa nappe underneath and cooling in the Dent Blanche nappe above the Combin zone, hence confirming a thrust interpretation for this event. The top NW displacing structures are thought to result from Late Eocene emplacement of the Dent Blanche nappe and the Combin zone onto the Middle Pennine Barrhorn series along the Combin fault. As related structures initiated during mildly blueschist facies conditions in the Dent Blanche nappe and the underlying Combin zone and both were emplaced together onto the greenschist facial Barrhorn series, it is concluded that the structures developed as the nappes moved upward relative to the earth's surface. Thus the Combin fault is regarded as a thrust. The geometry of this structure indicates that the Combin fault is an out of sequence thrust that locally cut down section. Hence, top NW out of sequence thrusting caused local thinning of the metamorphic/structural section in association with horizontal shortening. Out of sequence thrusts cutting down section, and back-thrusts, offer the possibility of explaining the pronounced break in the grade of metamorphism across the Combin fault, i.e. the contact between the eclogite facial Zermatt-Saas zone and the overlying lower grade Combin zone, by contractional deformation.  相似文献   

8.
A large database of structural, geochronological and petrological data combined with a Bouguer anomaly map is used to develop a two‐stage exhumation model of deep‐seated rocks in the eastern sector of the Variscan belt. An early sub‐vertical fabric developed in the orogenic lower and middle crust during intracrustal folding followed by the vertical extrusion of the lower crustal rocks. These events were responsible for exhumation of the orogenic lower crust from depths equivalent to 18?20 kbar to depths equivalent to 8?10 kbar, and for coeval burial of upper crustal rocks to depths equivalent to 8–9 kbar. Following the folding and vertical extrusion event, sub‐horizontal fabrics developed at medium to low pressure in the orogenic lower and middle crust during vertical shortening. Fabrics that record the early vertical extrusion originated between 350 and 340 Ma, during building of an orogenic root in response to SE‐directed Saxothuringian continental subduction. Fabrics that record the later sub‐horizontal exhumation event relate to an eastern promontory of the Brunia continent indenting into the rheologically weaker rocks of the orogenic root. Indentation initiated thrusting or flow of the orogenic crust over the Brunia continent in a north‐directed sub‐horizontal channel. This sub‐horizontal flow operated between 330 and 325 Ma, and was responsible for a heterogeneous mixing of blocks and boudins of lower and middle crustal rocks and for their progressive thermal re‐equilibration. The erosion depth as well as the degree of reworking decreases from south to north, pointing to an outflow of lower crustal material to the surface, which was subsequently eroded and deposited in a foreland basin. Indentation by the Brunia continental promontory was highly noncoaxial with respect to the SE‐oriented Saxothuringian continental subduction in the Early Visean, suggesting a major switch of plate configuration during the Middle to Late Visean.  相似文献   

9.
Detrital blue amphiboles detected in flysch sandstones of the Hellenides of mainland Greece give important information on uplift and exhumation history of blueschist terrains. The occurrence of these HP/LT minerals in the terminal flysch of the Pindos zone as well as in the Othrys flysch of the Subpelagonian zone from late Maastrichtian/ Palaeocene time onwards proves a Pre-Tertiary (Eohellenic) stage of blueschist formation. Detrital blue amphiboles from flysch sequences of the Ionian zone indicate a further pulse of uplift of high-pressure rocks during the Palaeocene/Eocene. Blueschist rocks of this latter time range are radiometrically well documented in the Hellenides.  相似文献   

10.
Documentation of pressure–temperature (P–T) histories across an epidote‐amphibolite facies culmination provides new insight into the tectono‐thermal evolution of the Brooks Range collisional orogen. Thermobarometry reveals that the highest grade rocks formed at peak temperatures of 560–600 °C and at pressures of 8–9.5 kbar. The thermal culmination coincides with the apex of a structural dome defined by oppositely dipping S2 crenulation cleavages suggesting post‐metamorphic doming. South of the thermal culmination, greenschist facies and lowermost epidote‐amphibolite facies rocks preserve widespread evidence for an early blueschist facies metamorphism. In contrast, no evidence for an early blueschist facies metamorphism was found in similar grade rocks of the northern flank, indicating that the southern flank underwent initial deeper burial during southward underthrusting of the continental margin. Thus, while the dome shows a symmetric distribution of peak temperatures, the P–T paths followed by the two flanks must have varied. This variation suggests that final thermal re‐equilibration to greenschist and epidote–amphibolite facies conditions did not result from a simple process of southward underthrusting followed by thermal re‐equilibration from the bottom upward. The new data are inconsistent with a previous model that invokes such re‐equilibration, along with northward thrusting of epidote–amphibolite facies rocks over lower grade rocks presently on the southern flank of the culmination, to produce an inverted metamorphic field gradient. Instead, it is suggested that following blueschist facies metamorphism, rocks of the southern and northern flanks were juxtaposed, during which time the more deeply buried south flank was partially emplaced above rocks to the north, where they escaped Albian epidote–amphibolite facies overprinting. Porphyroblast growth, which post‐dates the main fabric on the north flank of the culmination may be the result of Albian thermal re‐equilibration following this deformation. Post‐metamorphic doming resulted from a combination of Albian‐Cenomanian extension and Tertiary deformation.  相似文献   

11.
The middle Qilian orogenic belt and Lajishan orogenic belt, both of which were formed in the Caledonian, strike NW-SE direction across southeast Qilian Mountains and their basement consists of pre-Caledonian metamorphic rocks with lozenge-shaped ductile shear zones in the crystalline base- ment. The blunt angle between the conjugated ductile shear zones ranges from 104° to 114°, indicating approximate 210° of the maximum principal stress. The plateau ages of muscovite 40Ar/39Ar obtained from the mylonitized rocks in the ductile shear zones of Jinshaxia-Hualong-Keque massif within the middle Qilian massif are (405.1±2.4) Ma and (418.3±2.8) Ma, respectively. The chronology data confirm the formation of ductile shear zones in the Caledonian basement metamorphic rocks during the Cale- donian orogeny. Furthermore, on the basis of basement rock study, precise timing for the closing of the Late Paleozoic volcanic basin (or island-arc basin) and Lajishan ocean basin is determined. This pro- vides us a new insight into the closing of ocean basin in the structural evolution of orogenic belt.  相似文献   

12.
兰坪中新生代沉积盆地演化   总被引：28，自引：0，他引：28  
牟传龙  王剑 《矿物岩石》1999,19(3):30-36
兰坪中新生代沉积盆地形成和演化与金沙江洋的俯消减及洋陆转换过程密切相关,记录了其盆－山转换过程,早二叠世晚期－晚二叠世时期,由于金沙江洋的俯冲消减,形成了金沙江弧－盆系的空间配置,兰坪地区成为弧后盆地,早中三叠世,金沙江弧－盆系及东西两侧的昌都－兰坪陆块和中咱－中甸陆块的构造沉积式样发生大的转米,开始了兰坪中新生代盆－山转换历史,由于弧陆碰撞作用,使得兰坪分国地由弧后盆地转化成弧后前陆舅地,盆地中  相似文献   

13.
Orogenic Gold Mineralization in the Qolqoleh Deposit, Northwestern Iran   总被引：1，自引：1，他引：1  
The Qolqoleh gold deposit is located in the northwestern part of the Sanandai‐Sirjan Zone, northwest of Iran. Gold mineralization in the Qolqoleh deposit is almost entirely confined to a series of steeply dipping ductile–brittle shear zones generated during Late Cretaceous–Tertiary continental collision between the Afro‐Arabian and the Iranian microcontinent. The host rocks are Mesozoic volcano‐sedimentary sequences consisting of felsic to mafic metavolcanics, which are metamorphosed to greenschist facies, sericite and chlorite schists. The gold orebodies were found within strong ductile deformation to late brittle deformation. Ore‐controlling structure is NE–SW‐trending oblique thrust with vergence toward south ductile–brittle shear zone. The highly strained host rocks show a combination of mylonitic and cataclastic microstructures, including crystal–plastic deformation and grain size reduction by recrystalization of quartz and mica. The gold orebodies are composed of Au‐bearing highly deformed and altered mylonitic host rocks and cross‐cutting Au‐ and sulfide‐bearing quartz veins. Approximately half of the mineralization is in the form of dissemination in the mylonite and the remainder was clearly emplaced as a result of brittle deformation in quartz–sulfide microfractures, microveins and veins. Only low volumes of gold concentration was introduced during ductile deformation, whereas, during the evident brittle deformation phase, competence contrasts allowed fracturing to focus on the quartz–sericite domain boundaries of the mylonitic foliation, thus permitting the introduction of auriferous fluid to create disseminated and cross‐cutting Au‐quartz veins. According to mineral assemblages and alteration intensity, hydrothermal alteration could be divided into three zones: silicification and sulfidation zone (major ore body); sericite and carbonate alteration zone; and sericite–chlorite alteration zone that may be taken to imply wall‐rock interaction with near neutral fluids (pH 5–6). Silicified and sulfide alteration zone is observed in the inner parts of alteration zones. High gold grades belong to silicified highly deformed mylonitic and ultramylonitic domains and silicified sulfide‐bearing microveins. Based on paragenetic relationships, three main stages of mineralization are recognized in the Qolqoleh gold deposit. Stage I encompasses deposition of large volumes of milky quartz and pyrite. Stage II includes gray and buck quartz, pyrite and minor calcite, sphalerite, subordinate chalcopyrite and gold ores. Stage III consists of comb quartz and calcite, magnetite, sphalerite, chalcopyrite, arsenopyrite, pyrrhotite and gold ores. Studies on regional geology, ore geology and ore‐forming stages have proved that the Qolqoleh deposit was formed in the compression–extension stage during the Late Cretaceous–Tertiary continental collision in a ductile–brittle shear zone, and is characterized by orogenic gold deposits.  相似文献   

14.
青藏高原东北缘的宗务隆构造带位于柴达木地块与南祁连地块之间,位置极为重要,其中发育的韧性剪切带变形特征和形成时代对于理解该构造带的构造属性具有重要的制约意义。详细的野外构造解析,显微构造解析与年代学研究表明,宗务隆剪切带发育走向NWW-SEE向糜棱面理,其上发育NWW-SEE向缓倾的拉伸线理,指示该剪切带逆冲-走滑剪切的特征。宏观尺度上可见由于剪切作用形成的不对称褶皱、旋转碎斑、构造透镜体及褶劈理等变形形迹;显微镜下可观察到云母鱼、S-C组构、σ型残斑及石英动态重结晶、拔丝构造等变形现象,指示该韧性剪切变形的温度在300~400℃。对剪切带同构造变形的白云母和黑云母进行了40Ar/39Ar同位素年代学分析,2个样品的坪年龄分别为(245.8±1.7)Ma、(238.5±2.6)Ma,指示了该剪切变形发生在早—中三叠世期间。结合对区域地质、岩石学等资料的综合分析,该期韧性剪切变形年龄代表了宗务隆构造带印支期造山作用的时间,这期造山活动可能与宗务隆有限洋盆闭合后,南祁连地块与欧龙布鲁克地块的斜向碰撞有关。  相似文献   

15.
胶南地区的伸展作用——以胶南—诸城一带为例   总被引：11，自引：0，他引：11  
胶南地区的胶南—诸城一带存在两期不同方向的伸展构造。早期以形成近ＥＮ向的拉伸线理为特征，并在不同构造层次上显示出不同的变形。出露于研究区中部桃林尚庄隆起的含榴辉岩片麻岩中，主要以ＬＳ的组构为特征，显示出早期伸展作用下地壳岩石的垂直轴缩短、ＥＷ向拉伸的共轴应变；而在把下地壳含榴辉岩片麻岩与以变沉积岩为主的中上地壳岩石分开的韧性滑脱带上，此期伸展作用则表现为从东向西剪切的非共轴简单剪切变形，具有近水平的拉伸线理及近水平的ＥＷ向剪切褶皱和鞘褶皱枢纽。晚期伸展作用表现为近ＳＮ的伸展垮塌作用，形成向北和向南倾斜的两条韧性正剪切带，且遭受低角闪岩高绿片岩相条件下的透入性均匀简单剪切变形，剪切方向分别向北和向南。  相似文献   

16.
The wedge‐shaped Moornambool Metamorphic Complex is bounded by the Coongee Fault to the east and the Moyston Fault to the west. This complex was juxtaposed between stable Delamerian crust to the west and the eastward migrating deformation that occurred in the western Lachlan Fold Belt during the Ordovician and Silurian. The complex comprises Cambrian turbidites and mafic volcanics and is subdivided into a lower greenschist eastern zone and a higher grade amphibolite facies western zone, with sub‐greenschist rocks occurring on either side of the complex. The boundary between the two zones is defined by steeply dipping L‐S tectonites of the Mt Ararat ductile high‐strain zone. Deformation reflects marked structural thickening that produced garnet‐bearing amphibolites followed by exhumation via ductile shearing and brittle faulting. Pressure‐temperature estimates on garnet‐bearing amphibolites in the western zone suggest metamorphic pressures of ～0.7–0.8 GPa and temperatures of ～540–590°C. Metamorphic grade variations suggest that between 15 and 20 km of vertical offset occurs across the east‐dipping Moyston Fault. Bounding fault structures show evidence for early ductile deformation followed by later brittle deformation/reactivation. Ductile deformation within the complex is initially marked by early bedding‐parallel cleavages. Later deformation produced tight to isoclinal D2 folds and steeply dipping ductile high‐strain zones. The S2 foliation is the dominant fabric in the complex and is shallowly west‐dipping to flat‐lying in the western zone and steeply west‐dipping in the eastern zone. Peak metamorphism is pre‐ to syn‐D2. Later ductile deformation reoriented the S2 foliation, produced S3 crenulation cleavages across both zones and localised S4 fabrics. The transition to brittle deformation is defined by the development of east‐ and west‐dipping reverse faults that produce a neutral vergence and not the predominant east‐vergent transport observed throughout the rest of the western Lachlan Fold Belt. Later north‐dipping thrusts overprint these fault structures. The majority of fault transport along ductile and brittle structures occurred prior to the intrusion of the Early Devonian Ararat Granodiorite. Late west‐ and east‐dipping faults represent the final stages of major brittle deformation: these are post plutonism.  相似文献   

17.
Geothermobarometric and geochronological work indicates a complete Eocene/early Oligocene blueschist/greenschist facies metamorphic cycle of the Cycladic Blueschist Unit on Naxos Island in the Aegean Sea region. Using the average pressure–temperature (P–T) method of thermocalc coupled with detailed textural work, we separate an early blueschist facies event at 576 ± 16 to 619 ± 32°C and 15.5 ± 0.5 to 16.3 ± 0.9 kbar from a subsequent greenschist facies overprint at 384 ± 30°C and 3.8 ± 1.1 kbar. Multi‐mineral Rb–Sr isochron dating yields crystallization ages for near peak‐pressure blueschist facies assemblages between 40.5 ± 1.0 and 38.3 ± 0.5 Ma. The greenschist facies overprint commonly did not result in complete resetting of age signatures. Maximum ages for the end of greenschist facies reworking, obtained from disequilibrium patterns, cluster near c. 32 Ma, with one sample showing rejuvenation at c. 27 Ma. We conclude that the high‐P rocks from south Naxos were exhumed to upper mid‐crustal levels in the late Eocene and early Oligocene at rates of 7.4 ± 4.6 km/Ma, completing a full blueschist‐/greenschist facies metamorphic cycle soon after subduction within c. 8 Ma. The greenschist facies overprint of the blueschist facies rocks from south Naxos resulted from rapid exhumation and associated deformation/fluid‐controlled metamorphic re‐equilibration, and is unrelated to the strong high‐T metamorphism associated with the Miocene formation of the Naxos migmatite dome. It follows that the Miocene thermal overprint had no impact on rock textures or Sr isotopic signatures, and that the rocks of south Naxos underwent three metamorphic events, one more than hitherto envisaged.  相似文献   

18.
造山带挤出构造   总被引：14，自引：0，他引：14  
挤出构造模式已经从二维变形进入三维变形研究，在喜马拉雅造山带，高喜马拉雅结晶地体沿北倾的主中央逆冲断层和北倾 的绒布寺正断层，表现为相对刚性体之间的韧性体的楔状挤出。非连续介质大变形有限元数值模拟结果为这一模式提供了力学依据。在前人工作的基础上，提出了东阿尔卑斯三维管状挤出模式，将上部脆性层划分出北部左行平移带，南部右行平移带和中部挤出楔，中部韧性层在南阿尔卑斯和欧洲前陆碰撞过程中，既有垂向挤出，也有侧向挤出，在平行缩短方向的剖面上，由箱状背形隆起演化成逆－逆断层组合的楔状挤出，形成三角断面的管状，在垂直缩短方向的剖面上，中部韧性层呈不均匀流动，形成管状层流－韧性层中心为纯剪切，上部和侧部为简单剪切，在陕甘川邻接区，由于祁连山－北秦岭加里东喧向南的推挤和川西前陆的刚性阻挡，造成西秦岭和东松潘－甘孜复合造山体的三维滑脱挤出，以北西西向玛曲－略阳滑脱逆冲断裂和北东向青川一茂县滑脱逆冲断裂为界，将陕甘川邻接区的三维滑脱挤出复合造山体划分为西秦岭滑脱挤出带，摩天岭0若尔盖滑脱挤出楔和龙门山滑脱挤出逆冲椎覆带，以近南北向岷江滑脱逆冲断裂为界将滑脱挤出楔进一步划分成摩天岭滑脱挤出体和苦尔盖滑脱挤出体，除了不同构造单元的不均匀隆升外，摩天岭还表现出向西的侧向挤出。  相似文献   

19.
西藏冈底斯带扎雪-门巴韧性变形带形成时代及构造背景   总被引：2，自引：0，他引：2  
扎雪-门巴韧性变形带位于冈底斯构造带中部,是一条由北而南的逆冲推覆兼具右行走滑的斜冲韧性剪切带。带内所形成的构造岩主要为构造片麻岩和糜棱岩类,对花岗质糜棱岩中的黑云母进行40Ar/39Ar年龄测试,获得105.2±1.7Ma,认为该韧性剪切带形成于早白垩世。岩石组合和显微构造特征表明该韧性剪切带形成于中绿片岩相到高绿片岩相环境,可能与班公湖-怒江弧后洋盆的闭合碰撞有关。  相似文献   

20.
Eclogites, blueschists and greenschists are found in close proximity to one another along a 1‐km coastal section where the Cyclades Blueschist Unit (CBU) is exposed on SE Syros, Greece. Here, we show that the eclogites and blueschists experienced the same metamorphic history: prograde lawsonite blueschist facies metamorphism at 1.2–1.9 GPa and 410–530°C followed, at 43–38 Ma, by peak blueschist/eclogite facies metamorphism at 1.5–2.1 GPa and 520–580°C. We explain co‐existence of eclogites and blueschists by compositional variation probably reflecting original compositional layering. It is also shown that the greenschists record retrogression at 0.34 ± 0.21 GPa and T = 456 ± 68°C. This was spatially associated with a shear zone on a scales of 10–100‐m and veins on a scale of 1–10‐cm. Greenschist facies metamorphism ended at (or shortly after) 27 Ma. We thus infer a period of metamorphic quiescence after eclogite/blueschist facies metamorphism and before greenschist facies retrogression which lasted up to 11–16 million years. We suggest that this reflects an absence of metamorphic fluid flow at that time and conclude that greenschist facies retrogression only occurred when and where metamorphic fluids were present. From a tectonic perspective, our findings are consistent with studies showing that the CBU is (a) a high‐P nappe stack consisting of belts in which high‐P metamorphism and exhumation occurred at different times and (b) affected by greenschist facies metamorphism during the Oligocene, prior to the onset of regional tectonic extension.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号