首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The data obtained on melt and fluid inclusions in minerals of granites, metasomatic rocks, and veins with tin ore mineralization at the Industrial’noe deposit in the southern part of the Omsukchan trough, northeastern Russia, indicate that the melt from which the quartz of the granites crystallized contained globules of salt melts. Silicate melt inclusions were used to determine the principal parameters of the magmatic melts that formed the granites, which had temperatures at 760–1020°C, were under pressures of 0.3–3.6 kbar, and had densities of 2.11–2.60 g/cm3 and water concentrations of 1.7–7.0 wt %. The results obtained on the fluid inclusions testify that the parameters of the mineral-forming fluids broadly varied and corresponded to temperatures at 920–275°C, pressures 0.1–3.1 kbar, densities of 0.70–1.90 g/cm3, and salinities of 4.0–75.0 wt % equiv. NaCl. Electron microprobe analyses of the glasses of twelve homogenized inclusions show concentrations of major components typical of an acid magmatic melt (wt %, average): 73.2% SiO2, 15.3% Al2O3, 1.3% FeO, 0.6% CaO, 3.1% Na2O, and 4.5% K2O at elevated concentrations of Cl (up to 0.51 wt %, average 0.31 wt %). The concentrations and distribution of some elements (Cl, K, Ca, Mn, Fe, Cu, Zn, Pb, As, Br, Rb, Sr, and Sn) in polyphase salt globules in quartz from both the granites and a mineralized miarolitic cavity in granite were assayed by micro-PIXE (proton-induced X-ray emission). Analyses of eight salt globules in quartz from the granites point to high concentrations (average, wt %) of Cl (27.5), Fe (9.7), Cu (7.2), Mn (1.1), Zn (0.66), Pb (0.37) and (average, ppm) As (2020), Rb (1850), Sr (1090), and Br (990). The salt globules in the miarolitic quartz are rich in (average of 29 globules, wt %) Cl (25.0), Fe (5.4), Mn (1.0), Zn (0.50), Pb (0.24) and (ppm) Rb (810), Sn (540), and Br (470). The synthesis of all data obtained on melt and fluid inclusions in minerals from the Industrial’noe deposit suggest that the genesis of the tin ore mineralization was related to the crystallization of acid magmatic melts. Original Russian Text@ V.B. Naumov, V.S. Kamenetsky, 2006, published in Geokhimiya, 2006, No. 12, pp. 1279–1289.  相似文献   

2.
The study of re-homogenized melt inclusions in the same growth planes of quartz of pegmatites genetically linked to the Variscan granite of the Ehrenfriedersdorf complex, Erzgebirge, Germany, by ion microprobe analyses has determined high concentrations of Be, up to 10,000 ppm, in one type of melt inclusion, as well as moderate concentrations in the 100 ppm range in a second type of melt inclusion. Generally, the high Be concentrations are associated with the H2O- and other volatile-rich type-B melt inclusions, and the lower Be concentration levels are connected to H2O-poor type-A melt inclusions. Both inclusion types, representing conjugate melt pairs, are formed by a liquid–liquid immiscibility separation process. This extremely strong and very systematic scattering in Be provides insights into the origin of Be concentration and transport mechanisms in pegmatite-forming melts. In this contribution, we present more than 250 new analytical data and show with ion microprobe and fs-LA-ICPMS studies on quenched glasses, as well as with confocal Raman spectroscopy of daughter minerals in unheated melt inclusions, that the concentrations of Be may achieve such extreme levels during melt–melt immiscibility of H2O-, B-, F-, P-, ± Li-enriched pegmatite-forming magmas. Starting from host granite with about 10 ppm Be, melt inclusions with 10,000 ppm Be correspond to enrichment by a factor of over 1,000. This strong enrichment of Be is the result of processes of fractional crystallization and further enrichment in melt patches of pegmatite bodies due to melt–melt immiscibility at fluid saturation. We also draw additional conclusions regarding the speciation of Be in pegmatite-forming melt systems from investigation of the Be-bearing daughter mineral phases in the most H2O-rich melt inclusions. In the case of evolved volatile and H2O-rich pegmatite systems, B, P, and carbonates are important for the enrichment and formation of stable Be complexes.  相似文献   

3.
Pegmatite quartz from different occurrences in Norway and Namibia was investigated by a combination of ICP-MS, Electron Spin Resonance (ESR), Capillary Ion Analysis (CIA) and Gas Chromatography (GC) to quantify trace elements in very low concentrations and to determine their position in the quartz structure.The studied quartz samples show similar geochemical characteristics with low contents of most trace elements. Remarkable are the elevated concentrations of Al (36-636 ppm), Ti (1.6-25.2 ppm), Ge (1.0-7.1 ppm), Na (5.2 to >50 ppm), K (1.6 to >100 ppm) and Li (2.1-165.6 ppm). These elements are preferentially incorporated into the quartz lattice on substitutional (Al, Ti, Ge) and interstitial (Li, Na, K) positions. Li+ was found to be the main charge compensating ion for Al, Ge and Ti, whereas some ppm of Na and K may also be hosted by fluid inclusions. Ti may be incorporated as substitutional ion for Si or bound on mineral microinclusions (rutile). The results of the ESR measurements show that there may be a redistribution of alkali ions during irradiation. The diamagnetic [AlO4/M+]0 center transforms into the paramagnetic [AlO4]0 center, whilst the compensating ions diffuse away and may be captured by the diamagnetic precursor centers of [GeO4]0 and [TiO4]0 to form paramagnetic centers ([TiO4/Li+]0, [GeO4/Li+]0).In general, fluid inclusions in pegmatite quartz can be classified as H2O-CO2-NaCl type inclusions with water as the predominant volatile. Among the main elements hosted by fluid inclusions in quartz are Na, K, NH4, Ca, Mg and the anionic complexes Cl−, NO3−, HCO3− and SO42−. Gas analysis of trapped fluids shows volatile components in the following order of abundance: H2O > CO2 > N2(+) ≥ CH4 > COS > C2 and C3 hydrocarbons. Additionally, traces of Co, Ni, Zn, Pb, and Cu were detected by CIA in fluid inclusions of some samples. There are indications that the REE and Rb are also bound in fluid inclusions, however, the concentrations of these elements are too low to be measured by CIA. Assuming that the REE preferentially occur in fluid inclusions, the typical chondrite normalized REE distribution patterns with tetrad effects and a distinct negative Eu anomaly would reflect the composition of the mineralizing fluid.For a number of elements, especially those with extremely low concentrations, the “type” of incorporation in quartz could not directly be determined. We conclude that these ions either are too large to substitute for the small Si4+ ion or they are not soluble in the mineralizing fluids to be hosted by fluid inclusions. Some of these elements, which are concentrated in the specific mineralization of certain pegmatites, are not present in elevated concentrations in the paragenetic pegmatite quartz itself. This was observed, for instance, for Be, Cs and Rb in the Li (Be-Cs-Rb) pegmatites of Rubicon or for Nb and Ta for Nb-Ta bearing pegmatites from Norway. It may be concluded that the concentrations of these trace elements in quartz do not reflect the mineralization and that these elements thus, cannot be used as petrogenetic indicator.  相似文献   

4.
Melt inclusions were examined in phenocrysts in basalt, andesite, dacite, and rhyodacite from the Karymskii volcanic center in Kamchatka and dacite form Golovnina volcano in Kunashir Island, Kuriles. The inclusions were examined by homogenization and by analyzing glasses in more than 80 inclusions on an electron microscope and ion microprobe. The SiO2 concentrations in the melt inclusions in plagioclase phenocrysts from basalts from the Karymskii volcanic center vary from 47.4 to 57.1 wt %, these values for inclusions in plagioclase phenocrysts from andesites are 55.7–67.1 wt %, in plagioclase phenocrysts from the dacites and rhyodacites are 65.9–73.1 wt %, and those in quartz in the rhyodacites are 72.2–75.7 wt %. The SiO2 concentrations in melt inclusions in quartz from dacites from Golovnina volcano range from 70.2 to 77.0 wt %. The basaltic melts are characterized by usual concentrations of major components (wt %): TiO2 = 0.7–1.3, FeO = 6.8–11.4, MgO = 2.3–6.1, CaO = 6.7–10.8, and K2O = 0.4–1.7; but these rocks are notably enriched in Na2O (2.9–7.4 wt % at an average of 5.1 wt %, with the highest Na2O concentration detected in the most basic melts: SiO2 = 47.4–52.0 wt %. The concentrations of volatiles in the basic melts are 1.6 wt % for H2O, 0.14 wt % for S, 0.09 wt % for Cl, and 50 ppm for F. The andesite melts are characterized by high concentrations (wt %) of FeO (6.5 on average), CaO (5.2), and Cl (0.26) at usual concentrations of Na2O (4.5), K2O (2.1), and S (0.07). High water concentrations were determined in the dacite and rhyodacite melts: from 0.9 to 7.3 wt % (average of 15 analyses equals 4.5 wt %). The Cl concentration in these melts is 0.15 wt %, and those of F and S are 0.06 and 0.01 wt %, respectively. Melt inclusions in quartz from the dacites of Golovnina volcano are also rich in water: they contain from 5.0 to 6.7 wt % (average 5.6 wt %). The comparison of melt compositions from the Karymskii volcanic center and previously studied melts from Bezymyannyi and Shiveluch volcanoes revealed their significant differences. The former are more basic, are enriched in Ti, Fe, Mg, Ca, Na, and P but significantly depleted in K. The melts of the Karymskii volcanic center are most probably less differentiated than the melts of Bezymyannyi and Shiveluch volcanoes. The concentrations of water and 20 trace elements were measured in the glasses of 22 melt inclusions in plagioclase and quartz from our samples. Unusually high values were obtained for Li concentrations (along with high Na concentrations) in the basaltic melts from the Karymskii volcanic center: from 118 to 1750 ppm, whereas the dacite and rhyolite melts contain 25 ppm Li on average. The rhyolite melts of Golovnina volcano are much poorer in Li: 1.4 ppm on average. The melts of the Karymskii volcanic center are characterized by relative minima at Nb and Ti and maxima at B and K, as is typical of arc magmas.  相似文献   

5.
About 12.3 km3 of basaltic magma were erupted from the Lakagigar fissure in Iceland in 1783, which may have been derived from the high-level reservoir of Grimsvotn central volcano, by lateral flow within the rifted crust. We have studied the petrology of quenched, glassy tephra from sections through pyroclastic cones along the fissure. The chemical composition of matrix glass of the 1783 tephra is heterogeneous and ranges from olivine tholeiite to Fe–Ti rich basalt, but the most common magma erupted is quartz tholeiite (Mg#43.6 to 37.2). The tephra are characterized by low crystal content (5 to 9 vol%). Glass inclusions trapped in plagioclase and Fo86 to Fo75 olivine phenocrysts show a large range of compositions, from primitive olivine tholeiite (Mg#64.3), quartz tholeiite (Mg#43–37), to Fe–Ti basalts (Mg#33.5) which represent the most differentiated liquids and are trapped as rare melt inclusions in clinopyroxene. Both matrix glass and melt inclusion data indicate a chemically heterogeneous magma reservoir, with quartz tholeiite dominant. LREE-depleted olivine-tholeiite melt-inclusions in Mg-rich olivine and anorthitic-plagioclase phenocrysts may represent primitive magma batches ascending into the reservoir at the time of the eruption. Vesicularity of matrix glasses correlates with differentiation, ranging from 10 to 60 vol.% in evolved quartz-tholeiite glasses, whereas olivine-tholeiite glasses contain less than 10 vol.% vesicles. FTIR analyses of olivine-tholeiite melt-inclusions indicate concentrations of 0.47 wt% H2O and 430 to 510 ppm for CO2. Chlorine in glass inclusions and matrix glasses increases from 50 ppm in primitive tholeiite to 230 ppm in Fe–Ti basalts, without clear evidence of degassing. Melt inclusion analyses show that sulfur varies from 915 ppm to 1970 ppm, as total FeO* increases from 9 to 13.5 wt%. Sulfur degassing correlates both with vesicularity and magma composition. Thus sulfur in matrix glasses decreases from 1490 ppm to 500 ppm, as Mg # decreases from 47 to 37 and vesicularity of the magma strongly increases. These results indicate loss of at least 75% of sulfur during the eruption. The correlation of low sulfur content in matrix glasses with high vesicularity is regarded as evidence of the control of a major exsolving volatile phase on the degassing efficiency of the magma. Our model is consistent a quasi-permanent CO2 flux through the shallow-level magmatic reservoir of Grimsvotn. Following magma withdrawal from the reservoir and during eruption from the Lakagigar fissure, sulfur degassing was controlled by inherent CO2-induced vesicularity of the magma.  相似文献   

6.
Natural metapelitic staurolites contain appreciable amounts of lithium. Lithium contents were determined by ion microprobe with concentrations of representative samples independently analyzed by atomic absorption spectrophotometry for calibration. Seventy-one percent of the analyzed staurolites contain >0.1 wt.% Li2O, although the distribution is skewed to values less than 0.3 wt.%.High Li contents observed in staurolite are attributed to one or more of several factors: initiation of staurolite breakdown, lack of additional host phases for lithium (e.g. biotite), pre-metamorphic Li-rich bulk rock composition, and/or interaction of the rock with Li-rich fluids. Li content is generally not correlated with the modal amount of staurolite in the rock, rather Li values tend to reflect variable host rock Li. Lithium most likely resides in the R2+ tetrahedral site. Its incorporation into the structure is probably related to a coupled substitution with Al: ivLi viA1/3 ivR –1 2+ vi–1/3 When staurolite analyses yield low R2+ and high Al values, the possibility of high Li should be considered after accounting for variable H.Lithium partitions into common pelitic metamorphic minerals in the order staurolite>cordierite>biotite>muscovite> garnet, tourmaline, and chloritoid. Partitioning is non-ideal in staurolite and a function of Fe content. Li in staurolite expands its stability field to a higher T relative to garnet and sillimanite, and to a lower T relative to chloritoid and Al-silicate. Analysis of staurolites for Li may provide further insight into this enigmatic mineral.  相似文献   

7.
Using various methods of melt inclusion investigation, including electron and ion microprobe techniques, we estimated the composition, evolution, and formation conditions of melts producing the trachydacites and pantellerites of the Late Paleozoic bimodal volcanic association of Dzarta-Khuduk, Central Mongolia. Primary crystalline and melt inclusions were detected in anorthoclase from trachydacites and quartz from pantellerites and pantelleritic tuffs. Among the crystalline inclusions, we identified hedenbergite, fluorapatite, and pyrrhotite in the trachydacites and F-arfvedsonite, fluorite, ilmenite, and the rare REE diorthosilicate chevkinite in the pantellerites. Melt inclusions in anorthoclase from the trachydacites are composed of glass, a gas phase, and daughter minerals (F-arfvedsonite, fluorite, villiaumite, and anorthoclase rim on the inclusion wall). Melt inclusions in quartz from the pantellerites are composed of glass, a gas phase, and a fine-grained salt aggregate consisting of Li, Na, and Ca fluorides (griceite, villiaumite, and fluorite). Melt inclusions in quartz crystalloclasts from the pantelleritic tuffs are composed of homogeneous silicate glasses. The phenocrysts of the trachydacites and pantellerites crystallized at temperatures of 1060–1000°C. During thermometric experiments with quartz-hosted melt inclusions from the pantellerites, the formation of immiscible silicate and salt (fluoride) melts was observed at a temperature of 800°C. Homogeneous melt inclusions in anorthoclase from the trachydacites have both trachydacite and rhyolite compositions (wt %): 68–70 SiO2, 12–13 Al2O3, 0.34–0.74 TiO2, 5–7 FeO, 0.4–0.9 CaO, and 9–12 Na2O + K2O. The agpaitic index ranges from 0.92 to 1.24. The glasses of homogenized melt inclusions in quartz from the pantellerites and pantelleritic tuffs have rhyolitic compositions. Compared with the homogeneous glasses trapped in anorthoclase of the trachydacites, quartz-hosted inclusions from the pantellerites show higher SiO2 (72–78 wt %) and lower Al2O3 contents (7.8–10.0 wt %). They also contain 0.14–0.26 wt % TiO2, 2.5–4.9 wt % FeO, 9–11 wt % Na2O + K2O, and 0.9–0.15 wt % CaO and show an agpaitic index of 1.2–2.05. Homogeneous melt inclusions in quartz from the pantelleritic tuffs contain 69–72 wt % SiO2. The contents of other major components, including TiO2, Al2O3, FeO, and CaO, are close to those in the homogeneous glasses of quartzhosted melt inclusions in the pantellerites. The contents of Na2O + K2O are 4–10 wt %, and the agpaitic index is 1.0–1.6. The glasses of melt inclusions from each rock group show distinctive volatile compositions. The H2O content is up to 0.08 wt % in anorthoclase of the trachydacites, 0.4–1.4 wt % in quartz of the pantellerites, and up to 5 wt % in quartz of the pantelleritic tuffs. The content of F in the glasses of melt inclusions in the phenocrysts of the trachydacites is no higher than 0.67 wt %, and up to 1.4–2.8 wt % in quartz from the pantellerites. The Cl content is up to 0.2 wt % in the glasses of melt inclusions in the minerals of the trachydacites and up to 0.5 wt % in the glasses of quartz-hosted melt inclusions from the pantellerites. The investigation of trace elements in the homogenized glasses of melt inclusions in minerals showed that the trachydacites and pantellerites were formed from strongly evolved rare-metal alkaline silicate melts with high contents of Li, Zr, Rb, Y, Hf, Th, U, and REE. The analysis of the composition of homogeneous melt inclusions in the minerals of the above rocks allowed us to distinguish magmatic processes resulting in the enrichment of these rocks in trace and rare earth elements. The most important processes are the crystallization differentiation and immiscible separation of silicate and fluoride salt melts. It was also shown that all the melts studied evolved in spatially separated magma chambers. This caused the differences in the character of melt evolution between the trachydacites and pantellerites. During the final stages of differentiation, when the magmatic system was saturated with respect to ore elements, Na-Ca fluoride melts were separated and extracted considerable amounts of Li.  相似文献   

8.
Vein quartz from the Nether Polar Ural Province was examined by atomic emission spectrometry, gas chromatography, electron paramagnetic resonance, and electron microscopy. According to atomic emission spectrometric analysis, the total concentration of Al, Fe, Mg, Ti, Ca, Na, K, and other minor elements in the quartz varies from 8 to 47 ppm. The lowest concentrations of minor elements were detected in the granulated quartz. Giant-crystalline milk-white quartz is noted for higher concentrations of minor elements, including Na, K, and Ca, because it contains gas-liquid inclusions. The fine-grained quartz contains very small mineral inclusions and is thus noted for elevated concentrations of Ca, Fe, K, Mg, and Ti. Gas chromatographic data on the gas phase separated from the quartz at its heating indicate that this phase contains H2O, CO2, and other components. The H2O concentration reaches 429 ??g/g, while the CO2 content is commonly no higher than 20 ??g/g. Gas separation is at a maximum at temperatures of 100?C600°C, when gasliquid inclusions decrepitate, as is typical, first of all, of the giant-crystalline milk-white quartz. Gas separation continues at higher temperatures (below 1000°C) but is much less intense. The electron microscopic examination of quartz grains after their acid treatment indicates that the surface of these grains is covered by caverns of various morphology and size, which were produced by the partial dissolution of the quartz and the opening of its gas-liquid and mineral inclusions occurring near the surface; the inclusions were not, however, completely removed. The crystal structure of the quartz contains minor Al, Ge, Na, Li, Ti, and Fe. The lowest concentrations of Al and Ge paramagnetic centers are typical of the granulated (recrystallized) and fine-grained quartz. The giant-crystalline quartz, including its transparent varieties, and individual quartz crystals, first of all their smoky-citrine varieties, contain higher concentrations of minor elements. In the Nether Polar Ural Province, granulated quartz is potentially promising for producing especially pure quartz concentrates. The quality of the translucent coarse-to giant-crystalline quartz, which predominates in the resources and reserves, is deteriorated by gas-liquid inclusions in it and requires deep processing of the raw minerals.  相似文献   

9.
In the Sanandaj-Sirjan zone of metamorphic belt of Iran, the area south of Hamadan city comprises of metamorphic rocks, granitic batholith with pegmatites and quartz veins. Alvand batholith is emplaced into metasediments of early Mesozoic age. Fluid inclusions have been studied using microthermometry to evaluate the source of fluids from which quartz veins and pegmatites formed to investigate the possible relation between host rocks of pegmatites and the fluid inclusion types. Host minerals of fluid inclusions in pegmatites are quartz, andalusite and tourmaline. Fluid inclusions can be classified into four types. Type 1 inclusions are high salinity aqueous fluids (NaCleq >12 wt%). Type 2 inclusions are low to moderate salinity (NaCleq <12 wt%) aqueous fluids. Type 3 and 4 inclusions are carbonic and mixed CO2-H2O fluid inclusions. The distribution of fluid inclusions indicate that type 1 and type 2 inclusions are present in the pegmatites and quartz veins respectively in the Alvand batholith. This would imply that aqueous magmatic fluids with no detectable CO2 were present during the crystallization of these pegmatites and quartz veins. Types 3 and 4 inclusions are common in quartz veins and pegmatites in metamorphic rocks and are more abundant in the hornfelses. The distribution of the different types of fluid inclusions suggests that CO2 fluids generated during metamorphism and metamorphic fluids might also contribute to the formation of quartz veins and pegmatites in metamorphic terrains.  相似文献   

10.
In the Pan-African Lufilian belt (Western Zambian Copperbelt), uranium mineralizations, preferentially scattered in kyanite ± talc micaschists (metamorphosed evaporitic sediments) or concentrated along transposed quartz veins provide an opportunity to (1) understand the time/space relationship between the ore minerals and the deformation of the host rocks, (2) identify the different fluid events associated with specific stages of quartz deformation and (3) characterize the ore fluid geochemistry in terms of fluid origin and fluid/rock interactions. In the U occurrences studied in Lolwa and Mitukuluku (Domes region, Western Zambian Copperbelt), two mineralizing stages are described. The first generation of ore fluids (53–59 wt% CaCl2, 13–15 wt% NaCl; N2–H2 in the gas phase of fluid inclusions) circulated during the high-temperature quartz recrystallization, at 500–700 °C. This temperature is in agreement with the P–T conditions recorded during the crustal thickening related to continental collision at ca. 530 Ma. LA-ICPMS analyses show the presence of uranium within this fluid, with a concentration mode around 20 ppm. The second generation of ore fluid (21–32 wt% NaCl, 19–21 wt% CaCl2; CO2–CO in the gas phase of fluid inclusions) percolated at lower temperature conditions, at the brittle–ductile transition, between 200 and 300 °C. This temperature could be related to the exhumation of the high-grade metamorphic rocks at ca. 500 Ma. The formation of H2 and CO is interpreted as the result of radiolysis in the presence of dissolved uranium in the aqueous phase of these fluid inclusions. Finally, a late fluid (14–16 wt% NaClequiv) circulated in the brittle domain but seems unrelated to U (re-)mobilization event.  相似文献   

11.
Heating of quartz crystals in order to study melt and high-temperature fluid inclusions is a common practice to constrain major physical and chemical parameters of magmatic and hydrothermal processes. Diffusion and modification of trace element content in quartz and its hosted melt inclusions have been investigated through step-heating experiments of both matrix-free quartz crystals and quartz crystals associated with sulfides and other minerals using a Linkam TS1500 stage. Magmatic and hydrothermal quartz were successively analyzed after each heating step for Cu, Al, and Ti using electron probe micro-analyzer. After the last heating step, quartz crystals and their hosted melt inclusions were analyzed by laser ablation inductively coupled plasma mass spectrometry and compared to unheated samples. Heated samples reveal modification of Cu, Li, Na, and B contents in quartz and modification of Cu, Li, Ag, and K concentrations in melt inclusions. Our results show that different mechanisms of Cu, Li, and Na incorporation occur in magmatic and hydrothermal quartz. Heated magmatic quartz records only small, up to a few ppm, enrichment in Cu and Na, mostly substituting for Li. By contrast, heated hydrothermal quartz shows enrichment up to several hundreds of ppm in Cu, Li, and Na, which substitute for originally present H. This study reveals that the composition of both quartz and its hosted melt inclusions may be significantly modified upon heating experiments, leading to erroneous quantification of elemental concentrations. In addition, each quartz crystal also becomes significantly enriched in Cu in the sub-surface layer during heating. We propose that sub-surface Cu enrichment is a direct indication of Cu diffusion in quartz externally sourced from both the surrounding sulfides as well as the copper pins belonging to the heating device. Our study shows that the chemical compositions of both heated quartz and its hosted inclusions must be interpreted with great caution to avoid misleading geological interpretations.  相似文献   

12.
The late Triassic Baolun gold deposit hosted by Silurian phyllites is a large‐scale high‐grade gold deposit in Hainan Island, South China. The ores can be classified into quartz‐vein dominated type and less altered rock type. Three mineralization stages were recognized by mineral assemblages. The early stage, as the most important mineralization stage, is characterized by a quartz–native gold assemblage. The muscovite?quartz?pyrite?native gold assemblage is related to the intermedium mineralization stage. In late mineralization stage, native gold and Bi‐bearing minerals are paragenetic minerals. Microthermometry analyses show that the early mineralization stage is characterized by two types of fluid inclusions, including CO2‐rich inclusions (C‐type) and aqueous inclusions (W‐type). C‐type inclusions homogenize at 276–335°C with an averaged value of 306°C and have salinities of 1.0–10.0 wt% NaCl equivalent (mean value of 4.9 wt% NaCl equivalent). W‐type inclusions homogenize at 252–301°C (mean value of 278°C) with salinity of 4.0–9.7 wt% NaCl equivalent (mean value of 7.4 wt% NaCl equivalent). In intermedium mineralization stage, C‐type and W‐type inclusions homogenize at 228–320°C (mean value of 283°C) and 178–296°C (mean value of 241°C), with salinities of 2.4–9.9 wt% NaCl equivalent (mean value of 6.5 wt% NaCl equivalent) and 3.7–11.7 wt% NaCl equivalent (mean value of 7.7 wt% NaCl equivalent), respectively. No suitable mineral, such as quartz or calcite, was found for fluid inclusion study from late mineralization stage. In contrast, only aqueous inclusions were found from post‐ore barren veins, which yielded lower homogenization temperatures ranging from 168–241°C (mean value of 195°C) and similar salinities (2.6–12.6 wt% NaCl equivalent with averaged value of 7.2 wt% NaCl equivalent). The different homogenization temperatures and similar salinities of C‐type and W‐type from each mineralization stage indicate that fluid immiscibility and boiling occurred. The Baolun gold deposit was precipitated from a CO2‐bearing mesothermal fluid, and formed at a syn‐collision environment following the closure of the Paleo‐Tethys.  相似文献   

13.
Based on the investigation of melt inclusions using electron and ion microprobe analysis, we estimated the composition, evolution, and formation conditions of magmas producing the the comendites of the Sant bimodal volcanic association (Central Mongolia). The mechanisms of the formation of melts were determined. The primary melt and coexisting crystalline inclusions in quartz from three samples of comendites collected from different parts of the volcanic section were studied. Among the crystalline inclusions, sanidine, zircon, and the REE diortosilicate–chevkinite were identified. The phenocrysts of the comendites were determined to crystallize at temperatures of 880–960°C. The homogeneous glasses of melt inclusions have both trachydacite and rhyolite compositions. They are characterized by high concentrations of Zr, Nb, Rb, Y, Th and REE. Significant differences were determined in concentrations of Li and volatile component (H2O and F) in the glasses: some of the melts are enriched in these components, whereas other are depleted in them.Analysis of the composition of the glasses of the homogenized melt inclusions in quartz of comendites from the Sant bimodal association allowed us to recognize magmatic processes responsible for formation of the comendite melts. The dominant role among them belongs to crystallization differentiation of the magma, accompanied by a process of liquid immiscibility with participation of fluoride melts.  相似文献   

14.
Melt and fluid inclusions were investigated in six quartz phenocryst samples from the igneous rocks of the extrusive (ignimbrites and rhyolites) and subvolcanic (granite porphyries) facies of the Lashkerek Depression in the Kurama mining district, Middle Tien Shan. The method of inclusion homogenization was used, and glasses from more than 40 inclusions were analyzed on electron and ion microprobes. The chemical characteristics of these inclusions are typical of silicic magmatic melts. The average composition is the following (wt %): 72.4 SiO2, 0.06 TiO2, 13.3 Al2O3, 0.95 FeO, 0.03 MnO, 0.01 MgO, 0.46 CaO, 3.33 Na2O, 5.16K2O, 0.32 F, and 0.21 Cl. Potassium strongly prevails over sodium in all of the inclusions (K2O/Na2O averages 1.60). The average total of components in melt inclusions from five samples is 95.3 wt %, which indicates a possible average water content in the melt of no less than 3–4 wt %. Water contents of 2.0 wt % and 6.6 wt % were determined in melt inclusions from two samples using an ion microprobe. The analyses of ore elements in the melt inclusions revealed high contents of Sn (up to 970 ppm), Th (19–62 ppm, 47 ppm on average), and U (9–26 ppm, 18 ppm on average), but very low Eu contents (0.01 ppm). Melt inclusions of two different compositions were detected in quartz from a granite porphyry sample: silicate and chloride, the latter being more abundant. In addition to Na and K chlorides, the salt inclusions usually contain one or several anisotropic crystals and an opaque phase. The homogenization temperatures of the salt inclusions are rather high, from 680 to 820°C. In addition to silicate inclusions with homogenization temperatures of 820–850°C, a primary fluid inclusion of aqueous solution with a concentration of 3.7 wt % NaCl eq. and a very high density of 0.93 g/cm3 was found in quartz from the ignimbrite. High fluid pressure values of 6.5–8.3 kbar were calculated for the temperature of quartz formation. These estimates are comparable with values obtained by us previously for other regions of the world: 2.6–4.3 kbar for Italy, 3.7 kbar for Mongolia, 3.3–8.7 kbar for central Slovakia, and 3.3–9.6 kbar for eastern Slovakia. Unusual melt inclusions were investigated in quartz from another ignimbrite sample. In addition to a gas phase and transparent glass, they contain spherical Feoxide globules (81.2 wt % FeO) with high content of SiO2 (9.9 wt %). The globules were dissolved in the silicate melt within a narrow temperature range of 1050–1100°C, and the complete homogenization of the inclusions was observed at temperatures of 1140°C or higher. The combined analysis of the results of the investigation of these inclusions allowed us to conclude that immiscible liquids were formed in the high-temperature silicic magma with the separation of iron oxide-dominated droplets.  相似文献   

15.
Single fluid inclusion analogues with known elemental composition and regular shape were analyzed for trace element contents by particle-induced X-ray emission (PIXE)—a nondestructive method for the analysis of single fluid inclusions—to evaluate the accuracy and detection limits of this type of analysis. Elements with concentrations of 10 to 1000 ppm were measured with average estimated relative error of ±7%. For natural fluid inclusions with 30 μm radius and 20 μm depth in quartz, the total analytical errors were estimated to be ±40% relative for Ca, ±16% for Fe, ±13% for Zn, ±12% for Sr, and ±11% for Br and Rb, by considering uncertainties in microscopic measurements of inclusion depths. Detection limits of 4 to 46 ppm for elements of mass numbers 25-50 were achieved for analyses of a spherical fluid inclusion with 30 μm radius and 20 μm depth in quartz, at an integrated charge of 1.0 μC. The trace element compositions of single fluid inclusions in a hydrothermal quartz crystal were also determined. The elemental concentrations in the inclusions varied widely: 0.2-9 wt.% for Ca and Fe, 300-8000 ppm for Mn and Zn, 40-3000 ppm for Cu, 100-4000 ppm for Br, Rb, Sr, and Pb, and less than 100 ppm for Ge. Elemental concentrations of secondary fluid inclusions on the same trail varied over an order of magnitude, even though all these inclusions were formed from the same fluid. Elemental concentrations in inclusions on the same trail are positively correlated with each other, except for Cu and Rb. Ratios of almost all elements in the inclusions on the trail were essentially unchanged; thus, the elemental ratios can provide original information on trace element compositions of a hydrothermal fluid.  相似文献   

16.
 Interstitial glasses and glasses in small inclusions in Mg-rich phenocrysts of 14 boninites from New Caledonia, the Mariana Trench, Cape Vogel and Chichi-jima were analysed by electron microprobe and the water contents measured in situ by ion microprobe. The glasses are remarkably fresh and abundant (∼30–90 vol.%), and the phenocrysts are often skeletal with glass inclusions. Broad-beam analyses (∼1030) of interstitial glasses and ∼180 point analyses of glass inclusions were carried out, as well as ∼100 hydrogen analyses. Most glasses have low water-free totals, high water contents, very low MgO, and low total iron; they are almost entirely quartzofeldspathic and with few exceptions (Q+or+ab+ an+C) lies in the range 83–96. The interstitial glasses from New Caledonia, the Marianas and most of the glasses from Chichi-jima are dacitic, those from Cape Vogel straddle dacitic and andesitic compositions, whereas the glasses in a highly glassy sample from Chichi-jima are high-Mg andesitic or boninitic with up ∼9 wt% MgO, and are, with the exception of a few high-Ca boninites from Tonga, the most Mg-rich interstitial glasses so far described in boninites. Glasses included in orthopyroxene, olivine or clinoenstatite are boninitic or high-Mg andesitic in the highly glassy rock and dacitic to high-silica dacitic in the others. They are in general slightly more differentiated than the interstitial glasses, because of more-extensive crystallization on the host crystal in small inclusions. The interstitial glass compositions show a direct relationship between silica and Al2O3 and, for most glasses, alkalis, and inverse relationships between silica and CaO, FeO and MgO; alkalis and TiO2 show, however, a broad spread in values in glasses from the Marianas and New Caledonia. Included glasses show similar variations. Water contents in interstitial glasses are ∼2 wt% for the highly glassy high-Mg andesitic glasses from Chichi-jima, ∼5.4 wt% for the more differentiated andesitic to dacitic glasses from Cape Vogel, and ∼6.7–7.0 wt% in the most differentiated dacitic ones from the Marianas and New Caledonia. Water contents in glass inclusions in olivine, orthopyroxene and clinoenstatite are in the range ∼1.9–3.3 wt%. The interstitial glasses are black and not vesicular, showing that the liquids did not reach supersaturation after eruption on or intrusion near the sea floor, or were insufficiently so to allow nucleation of water vapour bubbles. The water is inferred to be primary and to increase strongly with crystallization in the residual liquid down to the glass-transition T. Received: 19 December 1994 / Accepted: 5 October 1995  相似文献   

17.
Abstract. Denggezhuang gold deposit is an epithermal gold‐quartz vein deposit in northern Muru gold belt, eastern Shandong, China. The deposit occurs in the NNE‐striking faults within the Mesozoic granite. The deposit consists of four major veins with a general NNE‐strike. Based on crosscutting relationships and mineral parageneses, the veins appear to have been formed during the same mineralization epochs, and are further divided into three stages: (1) massive barren quartz veins; (2) quartz‐sulfides veins; (3) late, pure quartz or calcite veinlets. Most gold mineralization is associated with the second stage. The early stage is characterized by quartz, and small amounts of ore minerals (pyrite), the second stage is characterized by large amounts of ore minerals. Fluid inclusions in vein quartz contain C‐H‐O fluids of variable compositions. Three main types of fluid inclusions are recognized at room temperature: type I, two‐phase, aqueous vapor and an aqueous liquid phase (L+V); type II, aqueous‐carbonic inclusions, a CC2‐liquid with/without vapor and aqueous liquid (LCO2+VCC2+Laq.); type III, mono‐phase aqueous liquid (Laq.). Data from fluid inclusion distribution, microthermometry, and gas analysis indicate that fluids associated with Au mineralized quartz veins (stage 2) have moderate salinity ranging from 1.91 to 16.43 wt% NaCl equivalent (modeled salinity around 8–10 wt% NaCl equiv.). These veins formatted at temperatures from 80d? to 280d?C. Fluids associated with barren quartz veins (stage 3) have a low salinity of about 1.91 to 2.57 wt% NaCl equivalent and lower temperature. There is evidence of fluid immiscibility and boiling in ore‐forming stages. Stable isotope analyses of quartz indicate that the veins were deposited by waters with δO and δD values ranging from those of magmatic water to typical meteoric water. The gold metallogenesis of Muru gold belt has no relationship with the granite, and formed during the late stage of the crust thinning of North China.  相似文献   

18.
By the example of the Orlovka massif of Li-F granites in Eastern Transbaikalia, the major- and trace-element (Li, Be, B, Ta, Nb, W, REE, Y, Zr, and Hf) compositions of the parental melt and the character of its variations during the formation of the differentiated rock series were quantitatively estimated for the first time on the basis of electron and ion microprobe analysis and Raman spectroscopy of rehomogenized glasses of melt inclusions in quartz. It was shown that the composition of the Orlovka melt corresponded to a strongly evolved alumina-saturated granitoid magma (A/CNK = 1.12–1.55) rich in normative albite, poor in normative quartz, and similar to ongonite melts. This magma was strongly enriched in water (up to 9.9 ± 1.1 wt %) and fluorine (up to 2.8 wt %). Most importantly, this massif provided the first evidence for high B2O3 contents in melts (up to 2.09 wt %). The highest contents of trace elements were observed in the melt from pegmatoid bodies in the amazonite granites of the border zone: up to 5077 ppm Li, 6397 ppm Rb, 313 ppm Cs, 62 ppm Ta, 116 ppm Nb, and 62 ppm W. Compared with the daughter rock, the Orlovka melt was depleted at all stages of formation in SiO2 (by up to 6 wt %), Na2O (by up to 2.5 wt %), and, to a smaller extent, in Ti, Fe, Mg, Sr, and Ba, but was enriched in Mn, Rb, F, B, and H2O.  相似文献   

19.
Lithium concentrations in various tektites and natural glass samples have been determined using RNAA. For most tektites Li abundances range from 40 to 60 ppm, with the exception of bediasites (23 ppm). In other natural glasses of presumed impact origin, the Li values are considerably lower (6–11 ppm). It is suggested that the Li concentrations reflect mostly the original abundance of this element in parent materials. A terrestrial origin for tektites is supported by the Li range overlap between tektites and sedimentary rocks  相似文献   

20.
Primary multiphase brine fluid inclusions in omphacite and garnet from low‐ to medium‐temperature eclogites have been analysed for Cl, Br, I, F, Li and SO4. Halogen contents and ratios provide information about trapped lower crustal fluids, even though the major element (Na, K, Ca) contents of inclusion fluids have been modified by fluid–mineral interactions and (step‐) daughter‐crystal formation after trapping. Halogens in the inclusion fluids were analysed with crush–leach techniques. Cl/Br and Cl/I mass ratios of eclogite fluids are in the range 31–395 and 5000–33 000, respectively. Most fluids have a Cl/Br ratio lower than modern seawater and a Cl/I ratio one order of magnitude lower than modern seawater. Fluids with the lowest Cl/Br and highest Cl/I ratios come from an eclogite that formed by hydration of granulite facies rocks, and may indicate that Br and I are fractionated into hydrous minerals. Reconstructions indicate that the inclusion fluids originally contained 500–4000 ppm Br, 1–14 ppm I and 33–438 ppm Li. Electron microprobe analyses of eclogite facies amphibole, biotite, phengite and apatite indicate that F and Cl fractionate most strongly between phengite (F/Cl mass ratio of 1469 ± 1048) and fluid (F/Cl mass ratio of 0.008), and the least between amphibole and fluid. The chemical evolution of Cl and Br in pore fluids during hydration reactions is in many ways analogous to Cl and Br in seawater during evaporation: the Cl/Br ratio remains constant until the aH2O value is sufficiently lowered for Cl to be removed from solution by incorporation into hydrous minerals.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号