首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
In diatremes and other volcanic vents, steep bodies of volcaniclastic material having differing properties (particle size distribution, proportion of lithic fragments, etc.) from those of the surrounding vent-filling volcaniclastic material are often found. It has been proposed that cylindrical or cone-shaped bodies result from the passage of “debris jets” generated after phreatomagmatic explosions or other discrete subterranean bursts. To learn more about such phenomena, we model experimentally the injection of gas-particulate dispersions through other particles. Analogue materials (glass beads or sand) and a finite amount of compressed air are used in the laboratory. The gas is made available by rapidly opening a valve—therefore the injection of gas and coloured particles into a granular host is a brief (<1 s), discrete event, comparable to what occurs in nature following subterranean explosions. The injection assumes a bubble shape while expanding and propagating upwards. In reaction, the upper part of the clastic host moves upward and outward above the ‘bubble’, forming a ‘dome’. The doming effect is much more pronounced for shallow injection depths (thin hosts), with dome angles reaching more than 45°. Significant surface doming is also observed for some full-scale subterranean blasts (e.g. buried nuclear explosions), so it is not an artefact of our setup. What happens next in the experiments depends on the depth of injection and the nature of the host material. With shallow injection into a permeable host (glass beads), the compressed air in the “bubble’ is able to diffuse rapidly through the roof. Meanwhile the coloured beads sediment into the transient cavity, which is also closing laterally because of inward-directed granular flow of the host. Depending on the initial gas pressure in the reservoir, the two-phase flow can “erupt” or not; non-erupting injections produce cylindrical bodies of coloured beads whereas erupting runs produce flaring upward or conical deposits. Changing the particle size of the host glass beads does not have a large effect under the size range investigated (100–200 to 300–400 μm). Doubling the host thickness (injection depth) requires a doubling of the initial gas pressure to produce similar phenomena. Such injections—whether erupting or wholly subterranean—provide a compelling explanation for the origin and characteristics of multiple cross-cutting bodies that have been documented for diatreme and other vent deposits.  相似文献   

2.
The Ferrar large igneous province of Antarctica contains significant mafic volcaniclastic deposits, some of which are interpreted to fill large vent complexes. Such a complex was re-examined at Coombs Hills to map individual steep-sided cross-cutting bodies in detail, and we found several contrasting types, two of which are interpreted to have filled subterranean passageways forcefully opened from below into existing, non-consolidated debris. These transient conduits were opened because of the propagation of debris jets – upward-moving streams of volcaniclastic debris, steam, magmatic gases +/− liquid water droplets – following explosive magma–aquifer interaction. Some debris jets probably remained wholly subterranean, whereas others made it to the surface, but the studied outcrops do not allow us to differentiate between these cases. The pipes filled with country rock-rich lapilli-tuff or tuff-breccia are interpreted to have formed following phreatomagmatic explosions occurring near the walls or floor of the vent complex, causing fragmentation of both magma and abundant country rock material. In contrast, some of the cross-cutting zones filled with basalt-rich tuff-breccia or lapilli-tuff could have been generated following explosions taking place within pre-existing basalt-bearing debris, well away from the complex walls or floor. We infer that once focused jets were formed, they did not incorporate significant amounts of existing debris while travelling through them; instead, incorporation of fragments from the granular host took place near explosion sites. Other basalt-rich tuff-breccia zones, accompanied by domains of in situ peperite and coherent basalt pods, are inferred to have originated by less violent processes.  相似文献   

3.
Coarse fragmental rocks, previously interpreted as primary pyroclastic accumulations infilling flared vents (Richey JE 1938) “The rhythmic eruptions of Ben Hiant, Ardnamurchan, a tertiary volcano. Bull Volcanol” 2(3):1–21), are re-interpreted as predominantly debris flow deposits, with minor hyperconcentrated and stream-flow deposits, temporally and spatially associated with the Palaeogene Ardnamurchan Central Complex (ACC), NW Scotland. These volcaniclastic rocks are conglomerates and breccias, interbedded with siltstones and sandstones, which formed by surface processes on a dissected landscape, developed in response to shallow emplacement of the ACC. Clast-matrix and photo-statistical analyses allow the palaeo-topography and drainage system to be reconstructed and the development of a palaeo-geographic model for the volcanic landscape. Slabs of basalt, dolerite and sandstone were transported as megablocks during catastrophic, gravity-driven events. Lower energy intervals during volcanic hiatuses are marked by lacustrine-fluvial volcaniclastic siltstones and sandstones preserving palynomorph assemblages. We suggest that shallow intrusion is a plausible initiation mechanism for mass wasting in other large igneous provinces. Historically, deposits of the type described here may have been misidentified as vent facies pyroclastic materials.  相似文献   

4.
The 1886 eruption of Tarawera, New Zealand, was unusual for a Plinian eruption because it involved entirely basaltic magma, originated in a 17-km-long fissure, and produced extremely overthickened proximal deposits with a complex geometry. This study focuses on an 8-km-long segment cutting across Mount Tarawera where over 50 point-source vents were active during the 5.5-h eruption. A detailed characterization of the proximal deposits is developed and used to interpret the range of styles and intensities of the vents, including changes with time. We identify the four vents that contributed most heavily to the Plinian fall and evaluate the extent to which current volcanic plume models are compatible with the depositional patterns at Tarawera. Three proximal units are mapped that have phreatomagmatic, magmatic, and phreatomagmatic characteristics, respectively. Within the magmatic proximal unit, beds of like character are grouped into packages and delineated on scaled cross sections. Package dispersal is quantified by measuring the linear thickness half-distance (t1/2) in the planes of the fissure walls. Most packages have localized dispersals (low t1/2), indicating that Strombolian-style activity dominated most vents. The more widely dispersed packages (high t1/2) reflect contributions from additional transport regimes that were more vigorous but still contributed considerable material to the proximal region. We conclude that the geometry of the observed proximal deposits requires three modes of fall transport: (1) fallout from the upper portions of the Plinian plumes produced principally by vents in four craters; (2) sedimentation from the margins of the lower portions of the Plinian plumes including the jets and possibly the lower convective regions; and (3) ejection by weak Strombolian-style explosions from vents that did not contribute significant volumes of particles to the high plume. We suggest that the curvature of the velocity profile across the jet region of each plume (1–4 km height) was important, and that the lower velocity at the margins allowed proximal deposition of a large volume of material with a wide grain-size range.  相似文献   

5.
The Mawson Formation and correlatives in the Transantarctic Mountains and South Africa record an early eruption episode related to the onset of Ferrar-Karoo flood basalt volcanism. Mawson Formation rocks at Coombs Hills comprise mainly (≥80% vol) structureless tuff breccia and coarse lapilli tuff cut by irregular dikes and sills, within a large vent complex (>30 km2). Quenched juvenile fragments of generally low but variable vesicularity, accretionary lapilli and country rock clasts within vent-fill, and pyroclastic density current deposits point to explosive interaction of basalt with groundwater in porous country rock and wet vent filling debris. Metre-scale dikes and pods of coherent basalt in places merge imperceptibly into peperite and then into surrounding breccia. Steeply dipping to sub-vertical depositional contacts juxtapose volcaniclastic rocks of contrasting componentry and grainsize. These sub-vertical tuff breccia zones are inferred to have formed when jets of debris + steam + water passed through unconsolidated vent-filling deposits. These jets of debris may have sometimes breached the surface to form subaerial tephra jets which fed subaerial pyroclastic density currents and fall deposits. Others, however, probably died out within vent fill before reaching the surface, allowing mixing and recycling of clasts which never reached the atmosphere. Most of the ejecta that did escape the debris-filled vents was rapidly recycled as vents broadened via lateral quarrying of country rock and bedded pyroclastic vent-rim deposits, which collapsed along the margins into individual vents. The unstratified, poorly sorted deposits comprising most of the complex are capped by tuff, lapilli tuff and tuff breccia beds inferred to have been deposited on the floor of the vent complex by pyroclastic density currents. Development of the extensive Coombs Hills vent-complex involved interaction of large volumes of magma and water. We infer that recycling of water, as well as recycling of pyroclasts, was important in maintaining water supply for phreatomagmatic interactions even when aquifer rock in the vent walls lay far from eruption sites as a consequence of vent-complex widening. The proportion of recycled water increased with vent-complex size in the same way that the proportion of recycled tephra did. Though water recycling leaves no direct rock record, the volcaniclastic deposits within the vent complex show through their lithofacies/structural architecture, lithofacies characteristics, and particle properties clear evidence for extensive and varied recycling of material as the complex evolved. Editorial responsibility: J. Donnelly-Nolan  相似文献   

6.
Submarine explosive eruptions are generally considered to become less likely with increasing depth due to the increasing hydrostatic pressure of the overlying water column. Volcaniclastic deposits from the North Arch volcanic field, north of Oahu, have textural characteristics of explosive fragmentation yet were erupted in water depths greater than 4,200 m. The most abundant volcaniclastic samples from North Arch are clast-supported with highly vesicular, angular pyroclasts. They are most likely near-vent pyroclastic fall deposits formed in eruption columns of limited height. Interbedded with highly vesicular pillow lava, they form low (50 to 200 m), steep-sided cones around the vents. Less common are stratified samples with graded bedding; one such sample includes a layer of roughly aligned, platy, bubble-wall glass fragments (resembling littoral limu o Pele) that may have been deposited by density currents. In addition to bubble-wall glass shards, numerous glass fragments with spherical, delicate spindle and ribbon shapes, and Pele's hair-like glass strands occur in the finer size fraction (<0.5 mm) of some samples. They are probably more distal fallout. Another sample, consisting of glass fragments dispersed in a marine clay matrix, was apparently reworked and deposited farther from the vents by bottom currents. Glass compositions include low-(∼0.4-0.6 wt%) and medium-K2O (>0.6 wt%) alkalic basalt, basanite, and nephelinite. Sulfur and chlorine abundances are high, reaching a maximum of 1,800 and 1,300 ppm, respectively. The ubiquitous presence of limu o Pele fragments, regardless of glass composition, suggests that bursts of Strombolian-like activity accompanied most eruptions. Coalescing vesicles observed in larger pyroclasts and some pillow lava suggests accumulation of volatiles. Since the great hydrostatic pressure makes steam expansion impossible, a volatile-rich, supercritical magmatic fluid probably drove the eruptions. If these volatile-rich magmas had erupted in shallow water or subaerially, tall fountains would most likely have resulted. The great hydrostatic pressure (>40 MPa) limited fountain and eruption column heights.  相似文献   

7.
An exceptionally well-exposed, ancient, intra-arc basin in the Permian Takitimu Group of New Zealand contains 14 km of interbedded primary volcanic and marine volcaniclastic rocks of basaltic to rhyodacitic composition. These are the products of subaerial and submarine arc volcanism and closely associated turbidite sedimentation. The Takitimu oceanic arc/basin setting formed a dynamic closed sedimentary system in which large volumes of volcaniclastic material generated at the arc was rapidly redeposited in marine basins flanking the eruptive centres. Volcanism probably included (1) moderate- to deep-water extrusion of lava and deposition of hyaloclastite, (2) extrusive and explosive eruptions from shallow marine to marginally emergent volcanoes in or on the margin of the basin, and (3) Plinian and phreato-Plinian eruptions from more distant subaerial vents along the arc. Much of the newly erupted material was rapidly transported to the adjacent marine basin by debris flows, slumping and sliding. Hemipelagic sedimentation predominated on the outer margin of the basin, infrequently interrupted by deposition of ash from the most explosive arc volcanism and the arrival of extremely dilute turbidites. Turbidite sedimentation prevailed in the remainder of the basin, producing a thick prograding volcaniclastic apron adjacent to the arc. The volcaniclastic strata closely resemble classic turbidite deposits, and show similar lateral facies variations to submarine fan deposits. Study of such sequences provides insight into poorly understood processes in modern arc-related basins.  相似文献   

8.
Piton des Neiges (PN) Volcano on Reunion Island offers a rare opportunity to study deposits related to degradation processes in a deeply eroded oceanic shield volcano. Both the inner parts and flanks reveal a large amount of resedimented volcaniclastic material, including extensive debris avalanche deposits. PN litho–structural units, first studied by Upton and Wadsworth [1965, Philos. Trans. R. Soc. Lond., A 271, pp. 105–130], are re-examined. This review highlights the importance of long volcanic repose periods and erosion processes during PN history. volcaniclastic deposits have been studied in the field in order to evaluate the spatial and temporal distribution of the three main types of PN degradation processes. The deposits of these processes have been classified into: (1) talus, (2) mudflow and debris flow, and (3) debris avalanche. Lithology, frequency and estimated volumes of each deposit type imply that the structural evolution of PN can be considered in terms of the competition between the volcanic productivity and the degradation and erosion processes. The occurrence of huge catastrophic avalanches produced by flank failure is convincingly linked to the basaltic activity of PN, which implies a very low risk at present. On the contrary, mudflows and debris flows pose an important risk due to the high population density focussed around the basin outlets. Moreover, if smaller debris avalanches can occur in the cirques of PN, another major risk must be evaluated.  相似文献   

9.
The Daeri Member, a Cretaceous volcanic–sedimentary succession, can be divided into lower, middle, and upper parts based on vertical changes in its lithologic characters. The lower Daeri Member is composed of siliciclastic deposits formed in a semi‐arid floodplain environment, which is overlain by the middle Daeri Member consisting mainly of andesite lava flow. After the emplacement of the andesite, activities of intrabasinal normal faults created accommodation on hanging wall blocks together with the development of intrabasinal topographic relief. The upper Daeri Member occurs only in hanging wall blocks and is composed of rhyolitic volcaniclastic sediments formed during an explosive volcanic eruption. Following the eruption, owing to semi‐arid climatic conditions and the destruction of vegetation, the eruptive materials were easily remobilized and deposited by episodic sediment gravity flows, resulting in deposition of the resedimented volcaniclastic deposits with sheet‐like geometry. Away from the intrabasinal normal faults, the resedimented volcaniclastic deposits show a decrease in grain size together with changes in inferred depositional processes from debris flows to hyperconcentrated flows and supercritical sheetfloods. This suggests that the resedimented volcaniclastic deposits were stacked on alluvial fan environments induced by intrabasinal topographic relief associated with normal fault activities. In addition, episodic movement of the faults gave rise to periodic fluctuation of the accommodation and an increase in gradient of the alluvial fan surface, resulting in the development of coarsening‐upward trends in the resedimented volcaniclastic deposits. The development of the alluvial fan and the coarsening‐upward trends indicate that dynamic tectonic subsidence and concomitant changes in the intrabasinal physiographic relief influenced the depositional processes and sizes of the transported volcaniclastic sediments of the upper Daeri Member. Thus, it is necessary to carefully observe tectonic signatures in volcaniclastic successions, particularly the syneruptive lithofacies, in order to reconstruct the tectonic and volcanic histories of receiving basins.  相似文献   

10.
A “volcanic dry avalanche deposit” is defined as a volcaniclastic deposit formed as a result of a large-scale sector collapse of a volcanic cone associated with some form of volcanic activity. Avalanche transport occurred in response to the gravitational field, in a manner similar to the transport of nonvolcanic debris streams (e.g. Hsü, 1975). Such deposits are characterized by megablock structure — deformed and fractured large blocks up to several hundreds meters in diameter. A megablock preserves original layering, intrusive contacts or weathered surfaces of the source volcanic edifice. Surface topography of the deposit is characterised with hummocky relief. Ratios of fell height to travel distance for volcanic dry avalanche deposits are between 0.18 and 0.06. This range is similar but smaller than the value of 0.58 to 0.08 for nonvolcanic debris stream deposit. This similarity suggests similar transportation mechanisms. Excessive travel distances as defined by Hsü (1975), calculated for volcanic dry avalanche deposits, give values larger than for debris stream deposits of the same volume. The difference is explained by lower rigidity of the collapsing mass due to the existence of soft pyroclastic layers, alteration around the vent, development of fractures owing to new cryptodome intrusion, and boiling of supercritical fluid contained within the collapsed mass.  相似文献   

11.
The Milos volcanic field includes a well-exposed volcaniclastic succession which records a long history of submarine explosive volcanism. The Bombarda volcano, a rhyolitic monogenetic center, erupted ∼1.7 Ma at a depth <200 m below sea level. The aphyric products are represented by a volcaniclastic apron (up to 50 m thick) and a lava dome. The apron is composed of pale gray juvenile fragments and accessory lithic clasts ranging from ash to blocks. The juvenile clasts are highly vesicular to non-vesicular; the vesicles are dominantly tube vesicles. The volcaniclastic apron is made up of three fades: massive to normally graded pumice-lithic breccia, stratified pumice-lithic breccia, and laminated ash with pumice blocks. We interpret the apron beds to be the result of water-supported, volcaniclastic mass-How emplacement, derived directly from the collapse of a small-volume, subaqueous eruption column and from syn-eruptive, down-slope resedimentation of volcaniclastic debris. During this eruptive phase, the activity could have involved a complex combination of phreatomagmatic explosions and minor submarine effusion. The lava dome, emplaced later in the source area, is made up of flow-banded lava and separated from the apron by an obsidian carapace a few meters thick. The near-vertical orientation of the carapace suggests that the dome was intruded within the apron. Remobilization of pyroclastic debris could have been triggered by seismic activity and the lava dome emplacement. Published online: 30 January 2003 Editorial responsibility: J. McPhie  相似文献   

12.
White Island is an active andesitic-dacitic composite volcano surrounded by sea, yet isolated from sea water by chemically sealed zones that confine a long-lived acidic hydrothermal system, within a thick sequence of fine-grained volcaniclastic sediment and ash. The rise of at least 106 m3 of basic andesite magma to shallow levels and its interaction with the hydrothermal system resulted in the longest historical eruption sequence at White Island in 1976–1982. About 107 m3 of mixed lithic and juvenile ejecta was erupted, accompanied by collapse to form two coalescing maar-like craters. Vent position within the craters changed 5 times during the eruption, but the vents were repeatedly re-established along a line linking pre-1976 vents. The eruption sequence consisted of seven alternating phases of phreatomagmatic and Strombolian volcanism. Strombolian eruptions were preceded and followed by mildly explosive degassing and production of incandescent, blocky juvenile ash from the margins of the magma body. Phreatomagmatic phases contained two styles of activity: (a) near-continuous emission of gas and ash and (b) discrete explosions followed by prolonged quiescence. The near-continuous activity reculted from streaming of magmatic volatiles and phreatic steam through open conduits, frittering juvennile shards from the margins of the magma and eroding loose lithic particles from the unconsolidated wall rock. The larger discrete explosions produced ballistic block aprons, downwind lobes of fall tephra, and cohesive wet surge deposits confined to the main crater. The key features of the larger explosions were their shallow focus, random occurrence and lack of precursors, and the thermal heterogeneity of the ejecta. This White Island eruption was unusual because of the low discharge rate of magma over an extended time period and because of the influence of a unique physical and hydrological setting. The low rate of magma rise led to very effective separation of magmatic volatiles and high fluxes of magmatic gas even during phreatic phases of the eruption. While true Strombolian phases did occur, more frequently the decoupled magmatic gas rose to interact with the conduit walls and hydrothermal system, producing phreatomagmatic eruptions. The form of these wet explosions was governed by a delicate balance between erosion and collapse of the weak conduit walls. If the walls were relatively stable, fine ash was slowly eroded and erupted in weak, near-continous phreatomagmatic events. When the walls were unstable, wall collapse triggered larger discrete phreatomagmatic explosions.  相似文献   

13.
Seismic activity at Stromboli Volcano is characterized by a variety of signals, emanating from three vents. For a long time, the northwest vent has been in constant activity. Periodically, large explosions occur and material is ejected beyond the crater walls. These large explosions are accompanied by sonic and infrasonic pressure waves in the atmosphere, and explosion quakes. Apart from large explosions, there is constant activity in the form of continuous gas bursts which are related to low infrasonic pulses in the atmosphere and volcanic tremor. We assume that volcanic tremor and low pressure infrasonics are generated by gas bubbles inside the volcanic conduit, and accordingly, we compute synthetic tremor by modeling the source function as a pressure variation in a spherical cavity that propagates through a finely layered medium, by means of Haskell's formalism. To simulate a tremor, we superpose in time domain a large number of such pulses of varying amplitudes and time delays, according to the observed infrasonic series. In addition to the spectral similarity, the observed and synthetic tremor display the same autocorrelation and Hurst exponents, implying similar long-term correlation. We present strong evidence in favour of an interpretation of the spectral peaks of the volcanic tremor at Stromboli in terms of resonances of the layered structure, hence, as a path effect rather than a source effect.  相似文献   

14.
The Ohakune Craters form one of several parasitic centres surrounding Ruapehu volcano, at the southern end of the Taupo Volcanic Zone. An inner scoria cone and an outer, probably older, tuff ring are the principal structures in a nested cluster of four vents.The scoria cone consists of alternating lava flows and coarse, welded and unwelded, strombolian block and bomb beds. The strombolian beds consist of principally two discrete types of essential clast, vesicular bombs and dense angular blocks. Rare finer-grained beds are unusually block-rich. The tuff ring consists of alternating strombolian and phreatomagmatic units. Strombolian beds have similar grain size characteristics to scoria cone units, but contain more highly vesicular unoxidised bombs and few blocks. Phreatomagmatic deposits, which contain clasts with variable degrees of palagonitisation, consist of less well-sorted airfall deposits and very poorly sorted, crystal-rich pyroclastic surge deposits.Disruption by expanding magmatic gas bubbles was a major but relatively constant influence on both strombolian and phreatomagmatic eruptions at Ohakune. Instead, the nature of deposits was principally controlled by two other variables, vent geometry and the relative influence of external water during volcanism. During tuff-ring construction, magma is considered to have risen rapidly to the surface, and to have been ejected without sufficient residence time in the vent for non-explosive degassing. Availability of external water principally governed the eruption mechanism and hence the nature of the deposits. Essentials clasts of the scoria cone are, by comparison, dense, degassed and oxidised. It is suggested that a change in vent geometry, possibly the construction of the tuff ring itself, permitted lava ponding and degassing during scoria cone growth. During strombolian eruptions, magma remaining in the vent probably became depleted in gas, leading to the formation of an inert zone, or crust, above actively degassing magma. Subsequent explosions had therefore to disrupt both this passive crust and underlying, vesiculating magma “driving” the eruption. Cycles of strombolian eruption are thought to have stopped when the thickness of the inert crust precluded explosive eruption and only recommenced when some of this material was removed, either as a lava flow or during phreatomagmatic explosions when external water entered the vent. Such explosions probably formed the unusually fine-grained and block-rich beds in the strombolian sequence.The Ohakune deposits are an excellent example of the products of explosive eruption of fluid, gas-rich basic magma vesiculating under very near-surface conditions. A complex interplay of rate of magma rise, rate and depth of formation of gas bubbles, vent geometry, abundance of shallow external water, wind velocity and accumulation rate of ejecta determines the nature of deposits of such eruptions.  相似文献   

15.
K2 is a steep-sided kimberlite pipe with a complex internal geology. Geological mapping, logging of drillcore and petrographic studies indicate that it comprises layered breccias and pyroclastic rocks of various grain sizes, lithic contents and internal structures. The pipe comprises two geologically distinct parts: K2 West is a layered sequence of juvenile- and lithic-rich breccias, which dip 20–45° inwards, and K2 East consists of a steep-sided pipe-like body filled with massive volcaniclastic kimberlite nested within the K2 pipe. The layered sequence in K2 West is present to > 900 m below present surface and is interpreted as a sequence of pyroclastic rocks generated by explosive eruptions and mass-wasting breccias generated by rock fall and sector collapse of the pipe walls: both processes occurred in tandem during the infill of the pipe. Several breccia lobes extend across the pipe and are truncated by the steep contact with K2 East. Dense pyroclastic rocks within the layered sequence are interpreted as welded deposits. K2 East represents a conduit that was blasted through the layered breccia sequence at a late stage in the eruption. This phase may have involved fluidisation of trapped pyroclasts, with loss of fine particles and comminution of coarse clasts. We conclude that the K2 kimberlite pipe was emplaced in several distinct stages that consisted of an initial explosive enlargement, followed by alternating phases of accumulation and ejection.  相似文献   

16.
Most of the extension fractures located in the Ethiopian rift are related to rift dynamics, and they have consistently similar orientations for hundreds of kilometers. The orientation of extension fracture gives the local extension direction which is perpendicular to its horns (end segments of an extension fracture). We have established clear geometrical relationships between tectonics and volcanism in the Main Ethiopian Rift by interpreting high-resolution images obtained from Landsat-TM and SPOT satellites and by quantitatively analyzing the geometry of extension fractures, elongated vents and linear volcanic clusters. Applying the relationships obtained, we show that extension fractures in the rift served as channels for magma rising to the surface, and that extension fractures underlie most of the elongated volcanic vents and linear volcanic clusters. The geometry of extension fractures beneath volcanic edifices can be deduced from the shape of elongated vents and pattern of linear volcanic clusters rooted on them. Utilizing the orientations of extension fractures directly observed and those inferred from elongated volcanic vents and linear clusters, we found that the extension direction of the Main Ethiopian Rift is northwest–southeast and that the direction has been rotated clockwise for about 20° in the time interval 2.83 to 0.023 Ma. The Recent axis of rift opening is oriented N40° and located closer to the southeastern escarpment giving an asymmetric geometry to the Main Ethiopian Rift (MER).  相似文献   

17.
Abstract Bahía Concepción is located in the eastern coast of the Baja California peninsula and it is shaped by northwestern–southeastern normal faults. These are associated with a 12–6 Ma rifting episode, although some have been reactivated since the Pliocene. The most abundant rocks correspond to the arc related Comondú Group, Oligocene to Miocene, which forms a mainly calc‐alkaline volcanic and volcaniclastic sequence. There are less extensive outcrops of sedimentary rocks, lava flows, domes and pyroclastic rocks of Pliocene to Quaternary ages. The Neogene volcanism in the area indicates a shift from a subduction regime to an intraplate volcanism related to continental extension and the opening of an oceanic basin. The Bahía Concepción area contains numerous Mn ore deposits, being the biggest at El Gavilán and Guadalupe. The Mn deposits occur as veins, breccias and stockworks, and are composed by Mn oxides (pyrolusite, coronadite, romanechite), dolomite, quartz and barite. The deposits are hosted in volcanic rocks of the Comondú Group and, locally, in Pliocene sedimentary rocks. Thus, the Mn deposits formed between the Middle Miocene and the Pliocene. The mineralized structures are associated with Miocene northwestern–southeastern fault systems, which are analogous to those associated with the Cu‐Co‐Zn‐Mn deposits of El Boleo. The Bahía Concepción area also bears subaerial and submarine hot springs, which are associated with the same fault systems and host rocks. The submarine and subaerial geothermal manifestations south of the bay are possibly related with recent volcanism. The geothermal manifestations within the bay are intertidal hot springs and shallow submarine diffuse venting areas. Around the submarine vents (5–15 m deep, 87°C), Fe‐oxyhydroxide crusts with pyrite and cinnabar precipitate. In the intertidal vents (62°C), aggregates of opal, calcite, barite and Ba‐rich Mn oxides occur covered by silica‐carbonate stromatolitic sinters. Some 10–30 cm thick crustiform veins formed by chalcedony, calcite and barite are also found close to the vents. The hydrothermal fluids exhibit mixed isotopic compositions between δ18O‐enriched meteoric and local marine water. The precipitation of Ba‐rich Mn oxides around the vent sites could be an active analog for the processes that produced Miocene to Pliocene hydrothermal Mn‐deposits.  相似文献   

18.
 At Shiotani, SW Japan, rhyolitic welded tuff forms a steep-sided funnel-shaped body, confined by Paleogene granitic rocks to an elliptical area 1–1.5 km across. The Shiotani welded tuff is pervasively welded and foliated concordantly with the contact that dips inward at angles of 70–90°. In contrast, nearby contemporary volcaniclastic deposits are non-welded and gently inclined. Near the contact with the granite, the tuff is plastically deformed and shows lineations that plunge inward at angles of 40–65°. Lithic and crystal clasts in the rheomorphic outer part are rotated in a plane normal to the foliations and parallel to the lineations indicating downward flow of the welded tuff. The geometry and internal structures suggest that the Shiotani welded tuff was emplaced and welded in a funnel-shaped eruption conduit. Upon collapse of a plinian or phreatoplinian eruption column, the majority of the conduit-filling pyroclasts probably fell back en masse into the conduit. Heat and steam from underlying magma and diffusion of interstitial volatiles into the glass perhaps reduced the viscosity of juvenile pyroclasts and facilitated welding in the conduit, especially at deep levels. The hot welded pyroclasts then flowed down the conduit wall during welding compaction and retreat of the magma. These processes resulted in increased welding toward the contacts and welding foliations concordant with the steep wall. Emplacement of nearby correlative volcaniclastic mass-flow deposits in a shelf to upper bathyal environment suggests a possibility that, when active, the Shiotani conduit was under the sea. Welding compaction would occur even under the sea provided that the steam generated in the upper part of the conduit fill prevented water access. Received: 28 February 1996 / Accepted: 5 May 1997  相似文献   

19.
The earliest activity of Monte Vulture, central Italy, included ignimbrites but the bulk of the volcano was built up by plinian airfall deposits. Contemporaneous remobilisation of these deposits formed an apron of lahars around the base of the main cone. The volcano was constructed on a ridge; the valley to the east and tributaries to the north and south became sediment traps for volcaniclastic materials emplaced by fluvial reworking and directly from volcanic activity. To the west the valley was swept clear by active downcutting. Instability of the west flank as a result of this erosion was probably a contributory cause of major gravitational sector collapse on the volcano's flank, terminating the main cone-building phase. The resultant scar is an amphitheatre-shaped hollow called here the Valle dei Grigi. Previous workers have attributed this feature to coalescing calderas formed by engulfment. The last volcanic phase was the production of the Monticchio calderas and associated phreatomagmatic explosions producing airfall and surge deposits. Because most of the activity at Vulture has been repeated plinian eruptions producing similar assemblages of products, detailed stratigraphy of the volcano is difficult to accomplish. To characterise Vulture in terms of its products, various facies are identified and interpreted in relation to volcanic processes, distance from vent and environmental conditions.  相似文献   

20.
Palaeomagnetic techniques for estimating the emplacement temperatures of volcanic deposits have been applied to pyroclastic and volcaniclastic deposits in kimberlite pipes in southern Africa. Lithic clasts were sampled from a variety of lithofacies from three pipes for which the internal geology is well constrained (the Cretaceous A/K1 pipe, Orapa Mine, Botswana, and the Cambrian K1 and K2 pipes, Venetia Mine, South Africa). The sampled deposits included massive and layered vent-filling breccias with varying abundances of lithic inclusions, layered crater-filling pyroclastic deposits, talus breccias and volcaniclastic breccias. Basalt lithic clasts in the layered and massive vent-filling pyroclastic deposits in the A/K1 pipe at Orapa were emplaced at >570°C, in the pyroclastic crater-filling deposits at 200–440°C and in crater-filling talus breccias and volcaniclastic breccias at <180°C. The results from the K1 and K2 pipes at Venetia suggest emplacement temperatures for the vent-filling breccias of 260°C to >560°C, although the interpretation of these results is hampered by the presence of Mesozoic magnetic overprints. These temperatures are comparable to the estimated emplacement temperatures of other kimberlite deposits and fall within the proposed stability field for common interstitial matrix mineral assemblages within vent-filling volcaniclastic kimberlites. The temperatures are also comparable to those obtained for pyroclastic deposits in other, silicic, volcanic systems. Because the lithic content of the studied deposits is 10–30%, the initial bulk temperature of the pyroclastic mixture of cold lithic clasts and juvenile kimberlite magma could have been 300–400°C hotter than the palaeomagnetic estimates. Together with the discovery of welded and agglutinated juvenile pyroclasts in some pyroclastic kimberlites, the palaeomagnetic results indicate that there are examples of kimberlites where phreatomagmatism did not play a major role in the generation of the pyroclastic deposits. This study indicates that palaeomagnetic methods can successfully distinguish differences in the emplacement temperatures of different kimberlite facies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号