首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The volcaniclastic Tepoztlán Formation (TF) represents an important rock record to unravel the early evolution of the Transmexican Volcanic Belt (TMVB). Here, a depositional model together with a chronostratigraphy of this Formation is presented, based on detailed field observations together with new geochronological, paleomagnetic, and petrological data. The TF consists predominantly of deposits from pyroclastic density currents and extensive epiclastic products such as tuffaceous sandstones, conglomerates and breccias, originating from fluvial and mass flow processes, respectively. Within these sediments fall deposits and lavas are sparsely intercalated. The clastic material is almost exclusively of volcanic origin, ranging in composition from andesite to rhyolite. Thick gravity-driven deposits and large-scale alluvial fan environments document the buildup of steep volcanic edifices. K-Ar and Ar-Ar dates, in addition to eight magnetostratigraphic sections and lithological correlations served to construct a chronostratigraphy for the entire Tepoztlán Formation. Correlation of the 577 m composite magnetostratigraphic section with the Cande and Kent (1995) Geomagnetic Polarity Time Scale (GPTS) suggests that this section represents the time intervall 22.8–18.8 Ma (6Bn.1n-5Er; Aquitanian-Burdigalian, Lower Miocene). This correlation implies a deposition of the TF predating the extensive effusive activity in the TMVB at 12 Ma and is therefore interpreted to represent its initial phase with predominantly explosive activity. Additionally, three subdivisions of the TF were established, according to the dominant mode of deposition: (1) the fluvial dominated Malinalco Member (22.8–22.2 Ma), (2) the volcanic dominated San Andrés Member (22.2–21.3 Ma) and (3) the mass flow dominated Tepozteco Member (21.3–18.8 Ma).  相似文献   

2.
Cores recovered from the Iceland Basin show evidence of transport and deposition of volcaniclastic sediment from the Eastern Volcanic Zone of Iceland during the Holocene and last glacial period. Three types of deposits have been identified: tephra fall, sediment gravity flows, and bottom-current-controlled deposits. Tephra fall layers contain basaltic glass of composition that suggests Katla volcano as the major source. A chronology of the volcano activity is reconstructed, back to isotopic stage 5d (120,000 yr). Glass chemistry of tephra in sediment gravity flows deposited south of Myrdalsjökull Canyon indicates a source in the Grímsvötn–Lakagígar volcanic system. These volcaniclastic gravity flows were most likely derived from jökulhlaups or large glacial floods, at a time of a more extensive ice cover over the volcanic zone. Deposition of the sediment gravity flows has created a deep-sea fan south of the canyon. Basalt glass composition, age, and depositional environment suggest that one early Holocene turbidite sequence was derived from a large jökulhlaup of the Grímsvötn area. The volcanogenic sediment gravity flows were influenced by a strong contour current, moving across the Katla sediment ridges. The contour current has winnowed the silt fraction and transported it downstream as suspended load. The recovery of numerous silty volcaniclastic layers, enriched in detrital crystals, indicates that they contributed to the sedimentation of contourite drifts.  相似文献   

3.
At Rakiraki in northeastern Viti Levu, the Pliocene Ba Volcanic Group comprises gently dipping, pyroxene-phyric basaltic lavas, including pillow lava, and texturally diverse volcanic breccia interbedded with conglomerate and sandstone. Three main facies associations have been identified: (1) The primary volcanic facies association includes massive basalt (flows and sills), pillow lava and related in-situ breccia (pillow-fragment breccia, autobreccia, in-situ hyaloclastite, peperite). (2) The resedimented volcaniclastic facies association consists of bedded, monomict volcanic breccia and scoria lapilli-rich breccia. (3) The volcanogenic sedimentary facies association is composed of bedded, polymict conglomerate and breccia, together with volcanic sandstone and siltstone-mudstone facies. Pillow lava and coarse hyaloclastite breccia indicate a submarine depositional setting for most of the sequence. Thick, massive to graded beds of polymict breccia and conglomerate are interpreted as volcaniclastic mass-flow deposits emplaced below wave base. Well-rounded clasts in conglomerate were reworked during subaerial transport and/or temporary storage in shoreline or shallow water environments prior to redeposition. Red, oxidised lava and scoria clasts in bedded breccia and conglomerate also imply that the source was partly subaerial. The facies assemblage is consistent with a setting on the submerged flanks of a shoaling basaltic seamount. The coarse grade and large volume of conglomerate and breccia reflect the high supply rate of clasts, and the propensity for collapse and redeposition on steep palaeoslopes. The clast supply may have been boosted by vigorous fragmentation processes accompanying transition of lava from subaerial to submarine settings. The greater proportion of primary volcanic facies compared with resedimented volcaniclastic and volcanogenic sedimentary facies in central and northwestern exposures (near Rakiraki) indicates they are more proximal than those in the southeast (towards Viti Levu Bay). The proximal area coincides with one of two zones where NW-SE-trending mafic dykes are especially abundant, and it is close to several, small, dome-like intrusions of intermediate and felsic igneous rocks. The original surface morphology of the volcano is no longer preserved, though the partial fan of bedding dip azimuths in the south and east and the wide diameter (exceeding 20 km) are consistent with a broad shield.  相似文献   

4.
The Izumi Group in southwestern Japan is considered to represent deposits in a forearc basin along an active volcanic arc during the late Late Cretaceous. The group consists mainly of felsic volcanic and plutonic detritus, and overlies a Lower to Upper Cretaceous plutono‐metamorphic complex (the Ryoke complex). In order to reconstruct the depositional environments and constrain the age of deposition, sedimentary facies and U–Pb dating of zircon grains in tuff were studied for a drilled core obtained from the basal part of the Izumi Group. On the basis of the lithofacies associations, the core was subdivided into six units from base to top, as follows: mudstone‐dominated unit nonconformably deposited on the Ryoke granodiorite; tuffaceous mudstone‐dominated unit; tuff unit; tuffaceous sandstone–mudstone unit; sandstone–mudstone unit; and sandstone‐dominated unit. This succession suggests that the depositional system changed from non‐volcanic muddy slope or basin floor, to volcaniclastic sandy submarine fan. Based on a review of published radiometric age data of the surrounding region of the Ryoke complex and the Sanyo Belt which was an active volcanic front during deposition of the Izumi Group, the U–Pb age (82.7 ±0.5 Ma) of zircon grains in the tuff unit corresponds to those of felsic volcanic and pyroclastic rocks in the Sanyo Belt.  相似文献   

5.
Catastrophic sedimentary processes associated with explosive eruptions represent a significant geologic hazard in volcanic areas. Here we report a striking historic example of an intermediate-scale explosive event whose environmental effects were strongly amplified by secondary rapid mass flows and hydrogeologic disasters. The 472 AD Pollena eruption of Somma-Vesuvius (Campania, Italy) took place in the critical period of the fall of the Western Roman Empire. On the basis of an integrated geologic–archaeologic study we point out evidence of human habitation at the time of the eruption, effects induced and recovery time in a wide territory of Campania, and how the eruption significantly accelerated the deterioration of the local society during the Late Ancient age. The eruption began with a pulsating, sustained eruption column, followed by pyroclastic surges and scoria flows. Hydromagmatism acted early in the event, different from the typical Plinian eruptions of Somma-Vesuvius. Specific facies associations of primary and secondary volcaniclastic deposits characterize three depositional domains, including the volcano slopes, the surrounding alluvial plains and the distal mountains of the Apennine Range. Both volcano slopes and distal mountain slopes supplied loose pyroclastic material to the hyperconcentrated floods and debris flows that spread across the alluvial plains. The great impact of secondary volcaniclastic processes arose from: (1) the high vulnerability of the territory due to its geomorphic context; (2) the humid climatic conditions; (3) the hydromagmatic character of the eruption; (4) the decline of land management at the end of the Roman Empire.  相似文献   

6.
We present laboratory and field evidence that in mountainous catchment‐fan systems persistent alluvial fanhead aggradation and trenching may result from infrequent, large sediment inputs. We suggest that the river‐fan systems along the fault‐bounded range front of the western Southern Alps, New Zealand, are likely to be in a dynamic equilibrium on ≥103‐yr timescales, superimposed on which their fanheads undergo long‐term cumulative episodic aggradation. These fanheads are active only in rare events, do not take part in the usual behaviour of the catchment‐fan system and require much longer to exhibit dynamic equilibrium than the rest of the fan. These findings (1) increase our knowledge of the effects of extreme events on alluvial fan morphodynamics in humid climates, (2) question the general applicability of inferring past climatic or tectonic regimes from alluvial‐fan morphology and stratigraphy and (3) provide a conceptual basis for hazard zonation on alluvial fans. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

7.
Te Whaiau Formation is a massive volcaniclastic deposit interbedded within gravelly and sandy volcanogenic sediments of the northwestern Tongariro ring plain. The ca. 0.5-km3 deposit comprises a clay-rich, matrix-supported diamicton with lithological and physical properties that are typical of a cohesive debris-flow deposit. Clays identified in the matrix are derived from hydrothermally altered andesite lava and pyroclastic rocks. The distribution pattern of the deposit, and the nature of the clay matrix, point to a source area that was located in the vicinity of Mt. Tongariro's current summit (1967 m). Most of the proximal zone is buried under late Pleistocene lavas forming the northwestern flank of the massif. In contrast, the medial and distal zones are well exposed to the northwest in the Whanganui River catchment. Lithofacies exposed in these latter zones contain isolated volcaniclastic megaclasts and well-preserved, jointed blocks of andesite. Small hummocks, up to 5 m high, are present only in the distal margins of the deposit. Based on these observations, possible source areas and analogy with similar deposits elsewhere, we infer that Te Whaiau Formation was initiated as a fluid-saturated debris avalanche that transformed downstream into a single, cohesive debris flow. It is interpreted that the mass flow was initially confined to the northwestern flank of Tongariro before spreading laterally onto the lowlands to the northwest. The resulting heterolithological diamicton filled stream channels in the western sector of the Tongariro ring plain. At 15 km from source, the debris flow encountered an elevated terrain, which acted as a barrier to further spreading to the north. The stratigraphy of the cover beds and K/Ar data on an underlying lava indicate that Te Whaiau Formation was emplaced between 55 and 60 ka, a cool period characterized by intense volcaniclastic sedimentation around the Tongariro massif. Jigsaw-fit fractured volcanic bombs suggest that an explosive eruption through hydrothermally altered rock and pyroclastic deposits probably triggered the mass flow. The characteristics of the deposit indicate that a large portion of the proto-Tongariro edifice collapsed en masse to form the initial avalanche. Hence, we infer that the current morphology of Tongariro volcano is derived not only from glacial erosion, but also from gravitational failure. Prehistoric eruptions and current geothermal activity on the upper northern and western slopes of the Tongariro massif suggest that avalanche-induced debris flows must be considered a potential future volcanic hazard for the region.  相似文献   

8.
Sedimentological studies of the dominantly volcanic, ca. 3.5 b.y. Warrawoona Group, eastern Pilbara Block, Western Australia, indicate widespread shallow-water deposition. Many cherty metasediments within the ultramafic-mafic sequence represent silicified carbonate mud, sand, breccia and conglomerate, and show cross-lamination, ripple marks, scour-and-fill structures, and evidence of reworking. At North Pole, some cherty metasediments appear to be silicified and baritized gypsiferous evaporites, and contain microfossils. Felsic volcaniclastic rocks include pyroclastic deposits, cross-laminated tuffaceous metasediments and conglomerate. Subaerial volcanism apparently increased as deposition proceeded.The depositional basin was large, volcanically active and apparently shallow with subdued marginal relief. Felsic volcanoes formed topographic highs within the basin from which sheets of volcanically derived sediments interfingered with ultramafic-mafic volcanics. The Onverwacht Group of the Barberton Mountain Land, South Africa, is of similar age to the Warrawoona Group and probably represents a similar environment, but other greenstone belts may have formed in contrasting basins, possibly under differing tectonic regimes.  相似文献   

9.
A sedimentary discontinuity is present in the late Pleistocene alluvial deposits exposed along the cliff in stream side, Gyeongju, Korea. Sedimentological study, Optically Stimulated Luminescence (OSL) age dating, and X‐ray diffraction (XRD), and X‐ray fluorescence spectrometer (XRF) analyses were conducted in order to interpret the origin of the discontinuity surface. Based on the sedimentological study, these deposits can be divided into three distinct stages, in ascending order: (Stage 1) development of a braided stream flowing from south to north and deposition by debris flows from the mountain aside the stream during and/or after deposition of the braided stream; (Stage 2) deposition by intermittent events during a state of stagnation after the abandonment or migration of the previously existed braided stream; and (Stage 3) deposition of gravels from debris flows from the mountain aside the stream. Hornfelsic gravels are common in Stage 1, whereas andesitic gravels are predominant in Stage 3, suggesting the provenance change from Stage 1 to Stage 3. The discontinuity surface is laterally extensive and marked by a distinct carbonaceous dark grey horizon between Stage 2 and Stage 3. It is characteristic that rootlets mineralized by vivianite are present, and iron‐oxide crusts are cutting across irregularly below the discontinuity surface. It is thus interpreted that the shift of depositional environment from an alluvial plain (Stage 2) (125 ka) to an alluvial fan (Stage 3) (94–55 ka) was an alluvial response to sea level change from the interglacial to the glacial. The development of iron‐oxide crusts and diagenetic vivianite in the discontinuity surface suggests humid condition persisted during the paleoclimatic shift from the last interglacial to the last glacial stages.  相似文献   

10.
Piton des Neiges (PN) Volcano on Reunion Island offers a rare opportunity to study deposits related to degradation processes in a deeply eroded oceanic shield volcano. Both the inner parts and flanks reveal a large amount of resedimented volcaniclastic material, including extensive debris avalanche deposits. PN litho–structural units, first studied by Upton and Wadsworth [1965, Philos. Trans. R. Soc. Lond., A 271, pp. 105–130], are re-examined. This review highlights the importance of long volcanic repose periods and erosion processes during PN history. volcaniclastic deposits have been studied in the field in order to evaluate the spatial and temporal distribution of the three main types of PN degradation processes. The deposits of these processes have been classified into: (1) talus, (2) mudflow and debris flow, and (3) debris avalanche. Lithology, frequency and estimated volumes of each deposit type imply that the structural evolution of PN can be considered in terms of the competition between the volcanic productivity and the degradation and erosion processes. The occurrence of huge catastrophic avalanches produced by flank failure is convincingly linked to the basaltic activity of PN, which implies a very low risk at present. On the contrary, mudflows and debris flows pose an important risk due to the high population density focussed around the basin outlets. Moreover, if smaller debris avalanches can occur in the cirques of PN, another major risk must be evaluated.  相似文献   

11.
The relative importance of tectonics, climate, base level and source lithology as primary factors on alluvial‐fan evolution, fan morphology and sedimentary style remain in question. This study examines the role of catchment lithology on development and evolution of alluvial megafans (>30 km in length), along the flanks of the Kohrud Mountain range, NE Esfahan, central Iran. These fans toe out at axial basin river and playa‐fringe sediments towards the centre of basin and tectonics, climatic change and base‐level fluctuations, were consistent for their development. They formed in a tectonically active basin, under arid to semiarid climate and a long term (Plio‐Pleistocene to Recent) change from wetter to drier conditions. The key differences between two of these fans, Soh and Zefreh fans, along the west and south flanks of this mountain range, is that their catchments are underlain by dissimilar bedrock types. The source‐area lithologies of the Soh and Zefreh fans are in sedimentary and igneous terrains, respectively, and these fans developed their geometry mainly in response to different weathering intensities of their catchment bedrock lithologies. Fan surface mapping (based on 1/50000 topographic maps, satellite images, and fieldwork), reveals that the geomorphic evolution of these fans differs in that the relatively large‐scale incision and through trenching of the Soh fan is absent in the Zefreh fan. Whereas the limited sediment supply of the Soh fan has resulted in a deep incised channel, the Zefreh fan has remained aggradational with little or no trenching into proximal to medial fan surface due to its catchment bedrock geology, composed mainly by physically weathered volcaniclastic lithology and characterized by high sediment supply for delivery during episodic flash floods. Sediment supply, which is mainly a function of climate and source lithology, is a dominant driver behind the development of fan sequences in alluvial megafans. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

12.
Detailed geologic mapping, petrography, and major and trace-element analyses of Proterozoic rocks from the Greenwood Lake Quadrangle, New York are compared with chemical analyses and stratigraphic information compiled for the entire Reading Prong. A persistent regional stratigraphy is evident in the mapped area whose geochemistry indicates protoliths consistent with a back-arc marginal basin sequence. The proposed marginal basin may have been floored by an older sialic basement and overlain by a basin-fill sequence consisting of a basal tholeiitic basalt, basic to intermediate volcanic or volcaniclastic rocks and carbonate sediments, a bimodal calc-alkaline volcanic sequence, and finally volcaniclastic, marine, and continental sediments. The presence of high-chlorine biotite and scapolite may indicate circulation of brine fluids or the presence of evaporite layers in the sequence. Abundant, stratabound magnetite deposits with a geologic setting very unlike that of cratonic, Proterozoic banded-iron formations are found throughout the proposed basin sequence. Associated with many of the magnetite deposits is unusual uranium and rare-earth element mineralization. It is proposed here that these deposits formed in an exhalative, volcanogenic, depositional environment within an extensional back-arc marginal basin. Such a tectonic setting is consistent with interpretations of protoliths in other portions of the Reading Prong, the Central Metasedimentary Belt of the Canadian Grenville Province, and recent interpretation of the origin of the Franklin lead-zinc deposits, suggesting a more cohesive evolving arc/back-arc tectonic model for the entire Proterozoic margin of the north-eastern portion of the North American craton.  相似文献   

13.
One active and ten extinct Quaternary volcanoes are described from the Cape Hoskins area, on the north coast of New Britain. They are mostly strato volcanoes built up of lava flows, lava domes, pyroclastic flows, lahars, tephra, and derived alluvial sediments. The volcanic products range in composition from basalt to rhyolite, but basaltic andesite and andesite predominate. Much of the area is covered by tephra, several metres thick, consisting mainly of rhyolitic pumice. The active volcano, Pago, is built up of several glacier-like lava flows, the last of which was formed during an eruption in 1914–18. Pago lies within a well-preserved caldera forming the central part of a broad low-angle cone, named Witori, which consists largely of welded and unwelded pyroclastic flow deposits. C-14 dates obtained on charcoal indicate that the caldera eruption occurred about 2500 years B. P. Another caldera of similar age lies south of Witori. Of the other eight volcanoes described four are relatively well-preserved steep-sided cones formed mainly of lava flows, one is a remnant of a low-angle cone with a caldera, and three are deeply eroded cones which have none of their constructional surfaces preserved.  相似文献   

14.
An exceptionally well-exposed, ancient, intra-arc basin in the Permian Takitimu Group of New Zealand contains 14 km of interbedded primary volcanic and marine volcaniclastic rocks of basaltic to rhyodacitic composition. These are the products of subaerial and submarine arc volcanism and closely associated turbidite sedimentation. The Takitimu oceanic arc/basin setting formed a dynamic closed sedimentary system in which large volumes of volcaniclastic material generated at the arc was rapidly redeposited in marine basins flanking the eruptive centres. Volcanism probably included (1) moderate- to deep-water extrusion of lava and deposition of hyaloclastite, (2) extrusive and explosive eruptions from shallow marine to marginally emergent volcanoes in or on the margin of the basin, and (3) Plinian and phreato-Plinian eruptions from more distant subaerial vents along the arc. Much of the newly erupted material was rapidly transported to the adjacent marine basin by debris flows, slumping and sliding. Hemipelagic sedimentation predominated on the outer margin of the basin, infrequently interrupted by deposition of ash from the most explosive arc volcanism and the arrival of extremely dilute turbidites. Turbidite sedimentation prevailed in the remainder of the basin, producing a thick prograding volcaniclastic apron adjacent to the arc. The volcaniclastic strata closely resemble classic turbidite deposits, and show similar lateral facies variations to submarine fan deposits. Study of such sequences provides insight into poorly understood processes in modern arc-related basins.  相似文献   

15.
The Tertiary Kuqa depression is a foreland basin generated by flexural subsidence resulting from the southward thrusting of the southern Tianshan Mountains. Tertiary basin fills of the depression can be classified into four tectonic sequences bounded by gentle angular unconformities. The sequences are composed of two parts, the lower transgressive and the upper progradational successions, which are separated by a regional maximum transgressive surface. The development of these sequences is attributed to the foreland tectonic process from flexural subsidence caused by thrust loading to rebounded uplift due to the erosion and stress release. The generation of the angular unconformities defining the tectonic sequences has been interpreted as the result of the rebounded uplift and the following thrusting. It has been found that there is a significant difference in depositional pattern between the northeastern and the northwestern margins. The relatively strong thrusting and mountain building occurring along the northwestern margin resulted in the development of thick-bedded alluvial fan and angular unconformities. The northeastern margin, in contract, lacks thick alluvial fan accumulation due to weak thrusting. This difference is likely related to the pre-existing east-west partition of the basin basement.  相似文献   

16.
Isolated, Late Miocene volcanogenic sequences in northern Alexander Island, Antarctic Peninsula, form an unusual, cogenetic association of volcaniclastic, sandy-gravelly lithofacies (including tillites) and volcanic (lava/hyalocalstite) lithofacies. Using simple lithofacies analysis and theoretical considerations of hydrodynamic effects of subglacial eruptions, valley-confined volcanic activity beneth thin, wet-based ice is suggested. The Alexander Island successions are complete enough to be regarded as model sequences for this uncommonly recorded type of eruptive/depositional activity. The sedimentary lithofacies represent resedimented tuffs and meltout or flow tills, which were probably deposited in subglacial ice tunnels eroded or enlarged by volcanically heated meltwater. The volcanic lithofacies formed by the interaction of hot magma with the ice tunnel walls (generating abundant meltwater) and water-saturatedsediments, resulting in the formation of heterogeneous masses of lava and hyaloclastite. There is no obvious sequence organisation in the sedimentary sections. This is probably due to a complex interplay of eruption-related and environmental hydrodynamic factors affecting the relative proportions of water and entrained sediment.  相似文献   

17.
The Etendeka Igneous Province in NW Namibia forms the eastern most extent of the Paraná–Etendeka Flood Basalt Province and, despite only covering about 5% of the Paraná–Etendeka, has been the focus of much interest, due to its extremely well exposed nature. The Huab Basin in NW Namibia forms the focus of this study, and formed a connected basin with the Paraná throughout Karoo times (late Palaeozoic) into the Lower Cretaceous. It contains a condensed section of the Karoo deposits, which indicate early periods of extension, and Lower Cretaceous aeolian and volcanic Etendeka deposits, which have their correlatives in the Paraná. In the Huab Basin, the volcanic rocks of the Etendeka Group consists of the Awahab and Tafelberg Formations, which are separated by a disconformity. Detailed examination of the Awahab Formation reveals an additional disconformity, which separates olivine-phyric basalts (Tafelkop-type) from basalt/basaltic andesites (Tafelberg-type) marking out a shield volcanic feature which is concentrated in an area to the SE of the Huab River near to the Doros igneous centre. Early volcanism consisted of pahoehoe style flows of limited lateral extent, which spilled out onto aeolian sands of an active aeolian sand sea 133 million years ago. This sand sea is equivalent to the sands making up the Botucatu Formation in the Paraná basin. The early expression of flood volcanism was that of laterally discontinuous, limited volume, pahoehoe flows of Tafelkop-type geochemistry, which interleaved with the aeolian sands forming the Tafelkop–Interdune Member basalts. These basalts are on-lapped by more voluminous, laterally extensive, basalt/basaltic andesite flows indicating a step-up in the volume and rate of flood volcanism, leading to the preservation of the shield volcanic feature. These geochemically distinct basalts/basaltic andesites form the Tsuhasis Member, which are interbeded with the Goboboseb and Sprinkbok quartz latite flows higher in the section. The Tsuhasis Member basalts, which form the upper parts of the Awahab Formation, are of Tafelberg-type geochemistry, but are stratigraphically distinct from the Tafelberg lavas, which are found in the Tafelberg Formation above. Thus, the internal stratigraphy of the flood basalt province contains palaeo-volcanic features, such as shield volcanoes, and other disconformities and is not that of a simple layer-cake model. This complex internal architecture indicates that flood volcanism started sporadically, with low volume pahoehoe flows of limited lateral extent, before establishing the more common large volume flows typical of the main lava pile.  相似文献   

18.
Palaeomagnetic polarity measurements from Beds I and II at Olduvai Gorge are described, and used to define the extent of the Olduvai event in the Olduvai Gorge section. The upper boundary of the event occurs very close to the base of the Lemuta Member in Bed II whilst the lower boundary is less well defined but probably occurs just below Tuff IA, The results imply minimum net accumulation rates of about 17 cm in 103 years in the lacustrine, and more than 30 cm in 103 years in the alluvial fan deposits, which represent only the upper part of the Olduvai event.  相似文献   

19.
 The ca. 10,500 years B.P. eruptions at Ruapehu volcano deposited 0.2–0.3 km3 of tephra on the flanks of Ruapehu and the surrounding ring plain and generated the only known pyroclastic flows from this volcano in the late Quaternary. Evidence of the eruptions is recorded in the stratigraphy of the volcanic ring plain and cone, where pyroclastic flow deposits and several lithologically similar tephra deposits are identified. These deposits are grouped into the newly defined Taurewa Formation and two members, Okupata Member (tephra-fall deposits) and Pourahu Member (pyroclastic flow deposits). These eruptions identify a brief (<ca. 2000-year) but explosive period of volcanism at Ruapehu, which we define as the Taurewa Eruptive Episode. This Episode represents the largest event within Ruapehu's ca. 22,500-year eruptive history and also marks its culmination in activity ca. 10,000 years B.P. Following this episode, Ruapehu volcano entered a ca. 8000-year period of relative quiescence. We propose that the episode began with the eruption of small-volume pyroclastic flows triggered by a magma-mingling event. Flows from this event travelled down valleys east and west of Ruapehu onto the upper volcanic ring plain, where their distal remnants are preserved. The genesis of these deposits is inferred from the remanent magnetisation of pumice and lithic clasts. We envisage contemporaneous eruption and emplacement of distal pumice-rich tephras and proximal welded tuff deposits. The potential for generation of pyroclastic flows during plinian eruptions at Ruapehu has not been previously considered in hazard assessments at this volcano. Recognition of these events in the volcanological record is thus an important new factor in future risk assessments and mitigation of volcanic risk at Tongariro Volcanic Centre. Received: 5 July 1998 / Accepted: 12 March 1999  相似文献   

20.
The Middle-Upper Miocene Las Burras–Almagro-El Toro (BAT) igneous complex within the Eastern Cordillera of the central Andes (∼24°S; NW Argentina) has revealed evidence of non-explosive interaction of andesitic magma with water or wet clastic sediments in a continental setting, including peperite generation. We describe and interpret lithofacies and emplacement mechanisms in three case studies. The Las Cuevas member (11.8 Ma) comprises facies related to: (i) andesite extruded in a subaqueous setting and generating lobe-hyaloclastite lava; and (ii) marginal parts of subaerial andesite lava dome(s) in contact with surface water, comprising fluidal lava lobes, hyaloclastite, and juvenile clasts with glassy rims. The Lampazar member (7.8 Ma) is represented by a syn-volcanic andesite intrusion and related peperite that formed within unconsolidated, water-saturated, coarse-grained volcaniclastic conglomerate and breccia. The andesite intrusion is finger-shaped and grades into intrusive pillows. Pillows are up to 2 m wide, tightly packed near the intrusion fingers, and gradually become dispersed in the host sediment ≥50 m from the parent intrusion. The Almagro A member (7.2 Ma) shows evidence of mingling between water-saturated, coarse-grained, volcaniclastic alluvial breccia and intruding andesite magma. The resulting intrusive pillows are characterized by ellipsoidal and tubular shape and concentric structure. The high-level penetration of magma in this coarse sediment was unconfined and irregular. Magma was detached in apophyses and lobes with sharp contacts and fluidal shapes, and without quench fragmentation and formation of a hyaloclastite envelope. The presence of peperite and magma–water contact facies in the BAT volcanic sequence indicates the possible availability of water in the system between 11–7 Ma and suggests a depositional setting in this part of the foreland basin of the central Andes characterized by an overall topographically low coastal floodplain that included extensive wetlands.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号