首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
It has been inferred from the focal mechanism of earthquakes and their hypocenter distribution (Shiono, 1977) that the stress field in southwestern Japan indicates complicated features; a NW-SE compression at shallow depths along the Nankai trough, an E-W or ESE-WNW compression in the inland crust, an extension parallel to the leading edge of the Philippine Sea plate at subcrustal depths in the region from the southern Chubu to northwestern Shikoku, and a down-dip tension beneath the Kyushu island.In order to investigate possible sources of these complex features of the stress state, a three-dimensional finite element method is employed to model the configuration of the subducting Philippine Sea plate, taking into consideration the following three possible types of forces:
1. (1) A negative buoyancy due to the density contrast between the subducting plate and the surrounding mantle.
2. (2) A northwestward compressive force generated by the movement of the Philippine Sea plate.
3. (3) A westward compressive force due to the movement of the Pacific plate.
For various combinations of different magnitudes of these forces, and of different elastic moduli, the stresses at a number of selected sites are calculated, and their directions are compared with those inferred from the focal mechanism and other geophysical information.It is found that the observed extensional stresses parallel to the leading edge of the subducting Philippine Sea plate may be caused mainly by the negative buoyancy. The northwestward compressive force may not play an important role in generating the complex stress field in southwestern Japan. The observed E-W compressional stress field prevailing in the inland region appears to result mainly from the westward-moving Pacific plate. The present results suggest that if a thin low-velocity transitional layer exists just above the subducting Philippine Sea plate, it could give appreciable effects on the mechanism of low-angled thrust faulting off the Kii peninsula and the Shikoku island.The magnitude of the shear stress in the continental crust and in the subducting plate is estimated to be of the order of several hundred bars, although the calculated shear stresses are considerably affected by the configuration of the subducting plate and also by the applied forces.It is interesting that the stress distribution appears to have some relations to seismicity of subcrustal earthquakes, and to the rupture process of large thrust earthquakes along the plate boundary.  相似文献   

2.
《Gondwana Research》2010,17(3-4):370-400
A dense nationwide seismic network recently constructed in Japan has been yielding large volumes of high-quality data that have made it possible to investigate the seismic structure in the Japanese subduction zone with unprecedented resolution. In this article, recent studies on the subduction of the Philippine Sea and Pacific plates beneath the Japanese Islands and the mechanism of earthquake and magma generation associated with plate subduction are reviewed. Seismic tomographic studies have shown that the Philippine Sea plate subducting beneath southwest Japan is continuous throughout the entire region, from Kanto to Kyushu, without disruption or splitting even beneath the Izu Peninsula as suggested in the past. The contact of the Philippine Sea plate with the Pacific plate subducting below has been found to cause anomalously deep interplate and intraslab earthquake activity in Kanto. Detailed waveform inversion studies have revealed that the asperity model is applicable to interplate earthquakes. Analyses of dense seismic and GPS network data have confirmed the existence of episodic slow slip accompanied in many instances by low-frequency tremors/earthquakes on the plate interface, which are inferred to play an important role in stress loading at asperities. High-resolution studies of the spatial variation of intraslab seismicity and the seismic velocity structure of the slab crust strongly support the dehydration embrittlement hypothesis for the generation of intraslab earthquakes. Seismic tomography studies have shown that water released by dehydration of the slab and secondary convection in the mantle wedge, mechanically induced by slab subduction, are responsible for magma generation in the Japanese islands. Water of slab origin is also inferred to be responsible for large anelastic local deformation of the arc crust leading to inland crustal earthquakes that return the arc crust to a state of spatially uniform deformation.  相似文献   

3.
We present the P-wave seismic tomography image of the mantle to a depth of 1200 km beneath the Indonesian region. The inversion method is applied to a dataset of 118,203 P-wave travel times of local and teleseismic events taken from ISC bulletins. Although the resolution is sufficient for detailed discussion in only a limited part of the study region, the results clarify the general tectonic framework in this region and indicate a possible remnant seismic slab in the lower mantle.

Structures beneath the Philippine Islands and the Molucca Sea region are well resolved and high-velocity zones corresponding to the slabs of the Molucca Sea and Philippine Sea plates are well delineated. Seismic zones beneath the Manila, Negros and Cotabato trenches are characterized by high-velocity anomalies, although shallow structures were not resolved. The Molucca Sea collision zone and volcanic zones of the Sangihe and Philippine arcs are dominated by low-velocity anomalies. The Philippine Sea slab subducts beneath the Philippine Islands at least to a depth of 200 km and may reach depths of 450 km. The southern end of the slab extends at least to about 6°N near southern Mindanao. In the south, the two opposing subducting slabs of the Molucca Sea plate are clearly defined by the two opposing high-velocity zones. The eastward dipping slab can be traced about 400 km beneath the Halmahera arc and may extend as far north as about 5°N. Unfortunately, resolution is not sufficient to reveal detailed structures at the boundary region between the Halmahera and Philippine Sea slabs. The westward dipping slab may subduct to the lower mantle although its extent at depth is not well resolved. This slab trends N-S from about 10°N in the Philippine Islands to northern Sulawesi. A NE-SW-trending high-velocity zone is found in the lower mantle beneath the Molucca Sea region. This high-velocity zone may represent a remnant of the former subduction zone which formed the Sulawesi arc during the Miocene.

The blocks along the Sunda and Banda arcs are less well resolved than those in the Philippine Islands and the Molucca Sea region. Nevertheless, overall structures can be inferred. The bowl-shaped distribution of the seismicity of the Banda arc is clearly defined by a horseshoe-shaped high-velocity zone. The tomographic image shows that the Indian oceanic slab subducts to a depth deeper than 300 km i.e., deeper than its seismicity, beneath Andaman Islands and Sumatra and may be discontinuous in northern Sumatra. Along southern Sumatra, Java and the islands to the east, the slab appears to be continuous and can be traced down to at least a depth of the deepest seismicity, where it appears to penetrate into the lower mantle.  相似文献   


4.
We determined high-resolution three-dimensional P- and S-wave velocity (Vp, Vs) structures beneath Kyushu in Southwest Japan using 177,500 P and 174,025 S wave arrival times from 8515 local earthquakes. A Poisson's ratio structure was derived from the obtained Vp and Vs values. Our results show that significant low-Vp, low-Vs and high Poisson's ratio zones are extensively distributed along the volcanic front in the uppermost mantle, which extend and dip toward the back-arc side in the mantle wedge. In the crust, low-Vp, low-Vs and high Poisson's ratio anomalies exist beneath the active volcanoes. The subducting Philippine Sea slab is clearly imaged as a high-Vp, high-Vs and low Poisson's ratio zone from the Nankai Trough to the back-arc. A thin low-velocity zone is detected above the subducting Philippine Sea slab in the mantle wedge, and earthquakes in the upper mantle are distributed along the transition zone between this thin low-velocity zone and the high-velocity Philippine Sea slab, which may imply that oceanic crust exists on the top of the slab and the forearc mantle wedge is serpentinized due to the slab dehydration. The seismic velocity of the subducting oceanic crust with basaltic or gabbroic composition is lower than that of the mantle according to the previous studies. The serpentinization process could also dramatically reduce the seismic velocity in the forearc mantle wedge.  相似文献   

5.
A dense nationwide seismic network recently constructed in Japan has resulted in the production of a large amount of high-quality data that have enabled the high-resolution imaging of deep seismic structures in the Japanese subduction zone. Seismic tomography, precise locations of earthquakes, and focal mechanism research have allowed the identification of the complex structure of subducting slabs beneath Japan, revealing that the subducting Philippine Sea slab underneath southwestern Japan has an undulatory configuration down to a depth of 60–200 km, and is continuous from Kanto to Kyushu without disruption or splitting, even within areas north of the Izu Peninsula. Analysis of the geometry of the Pacific and Philippine Sea slabs identified a broad contact zone beneath the Kanto Plain that causes anomalously deep interplate and intraslab earthquake activity. Seismic tomographic inversions using both teleseismic and local events provide a clear image of the deep aseismic portion of the Philippine Sea slab beneath the Japan Sea north of Chugoku and Kyushu, and beneath the East China Sea west of Kyushu down to a depth of ∼450 km. Seismic tomography also allowed the identification of an inclined sheet-like seismic low-velocity zone in the mantle wedge beneath Tohoku. A recent seismic tomography work further revealed clear images of similar inclined low-velocity zones in the mantle wedge for almost all other areas of Japan. The presence of the inclined low-velocity zones in the mantle wedge across the entirety of Japan suggests that it is a common feature to all subduction zones. These low-velocity zones may correspond to the upwelling flow portion of subduction-induced convection systems. These upwelling flows reach the Moho directly beneath active volcanic areas, suggesting a link between volcanism and upwelling.  相似文献   

6.
Dapeng Zhao  Eiji Ohtani   《Gondwana Research》2009,16(3-4):401-413
We present new pieces of evidence from seismology and mineral physics for the existence of low-velocity zones in the deep part of the upper mantle wedge and the mantle transition zone that are caused by fluids from the deep subduction and deep dehydration of the Pacific and Philippine Sea slabs under western Pacific and East Asia. The Pacific slab is subducting beneath the Japan Islands and Japan Sea with intermediate-depth and deep earthquakes down to 600 km depth under the East Asia margin, and the slab becomes stagnant in the mantle transition zone under East China. The western edge of the stagnant Pacific slab is roughly coincident with the NE–SW Daxing'Anling-Taihangshan gravity lineament located west of Beijing, approximately 2000 km away from the Japan Trench. The upper mantle above the stagnant slab under East Asia forms a big mantle wedge (BMW). Corner flow in the BMW and deep slab dehydration may have caused asthenospheric upwelling, lithospheric thinning, continental rift systems, and intraplate volcanism in Northeast Asia. The Philippine Sea slab has subducted down to the mantle transition zone depth under Western Japan and Ryukyu back-arc, though the seismicity within the slab occurs only down to 200–300 km depths. Combining with the corner flow in the mantle wedge, deep dehydration of the subducting Pacific slab has affected the morphology of the subducting Philippine Sea slab and its seismicity under Southwest Japan. Slow anomalies are also found in the mantle under the subducting Pacific slab, which may represent small mantle plumes, or hot upwelling associated with the deep slab subduction. Slab dehydration may also take place after a continental plate subducts into the mantle.  相似文献   

7.
台湾-吕宋岛双火山弧的构造意义   总被引：3，自引：0，他引：3  
扼要评介了国内外关于台湾-吕宋岛双火山弧在南海沿马尼拉海沟俯冲的动力学过程和俯冲板块深部形态等方面研究的成果;认为目前的动力学模式还不够完善,没有能够对台湾-吕宋岛双火山弧中存在的第四纪火山间断做出合理的解释,为此引入“板片窗”概念,对已经提出的动力学模式进行了修改;并统计1964~2006年发生于菲律宾地区的地震震中位置,认为存在于菲律宾群岛17°~19°N之间的深源地震稀疏带和存在于14°~15°N之间的喇叭状地震稀疏带是地震作用对于南海板片窗构造存在的反映;结合研究区域已有应力场研究资料,认为俯冲的南海亚板块中板片窗两侧俯冲倾角的差异,应该是造成俯冲带内应力分布出现分带现象的原因之一。  相似文献   

8.
We conduct shear wave splitting measurements on waveform data from the Hi-net and the broadband F-net seismic stations in Kanto and SW Japan generated by shallow and intermediate-depth earthquakes occurring in the subducting Philippine Sea and Pacific slabs. We obtain 1115 shear wave splitting parameter pairs. The results are divided into those from the shallow (depth < 50 km) and the deep (depth > 50 km) events. The deep events beneath Kanto are further divided into PHS1 and PHS2 (upper and lower planes of the double seismic zone in the Philippine Sea slab, respectively), PAC1 and PAC2 (western and eastern Pacific slab, respectively) events. The results from the shallow events represent the crustal anisotropy, and their fast directions are more or less aligned in the σHmax directions, implying that the anisotropy is produced by the alignment of the vertical cracks in the crust induced by the compressive stresses. In Kanto, Kii Peninsula and Kyushu regions, the results from the deep events suggest a contribution from the mantle wedge anisotropy. Events from all groups beneath Kanto show NW, NE and EW fast directions. This complex pattern seems to be produced by the corner flows induced by both the WNW PAC plate subduction and the oblique NNW PHS slab subduction with the associated olivine lattice-preferred orientations (LPOs), and the anisotropy frozen in the PHS slab. The deep events beneath Kii Peninsula show NE and NW fast directions and may be produced by the corner flow produced by the NNW PHS slab subduction with the associated olivine LPOs. The NE directions might also be produced by the segregated melts in the thin layers parallel to the PHS slab subduction. The deep events beneath N Kyushu show NNW fast directions, which may result from the southeastward flow in the upper mantle inferred from the stresses in the upper plate. Results from the deep events beneath middle-south Kyushu show dominantly E–W fast directions, in both the fore- and back-arcs. They may be produced by the corner flow of the westward PHS slab subduction with the olivine LPOs. Because the source regions with multiple fast directions are not resolved in this study, further detailed analyses of shear wave splitting are necessary for a better understanding of the stress state, the induced mantle flow, and the melt-segregation processes.  相似文献   

9.
We conducted a seismic tomographic analysis to estimate the crustal structure beneath the Shikoku and Chugoku regions in Japan. The Philippine Sea slab (PHS slab) subducts continuously in a SE–NW direction beneath this region, and the crustal structure is complex. Furthermore, the Median Tectonic Line (MTL), one of the longest and most active arc-parallel fault systems in Japan (hereafter, the MTL active fault system), is located in this area, and the right-lateral strike–slip movement of this fault system is related to the oblique subduction of the PHS slab. The MTL active fault system has ruptured repeatedly during the last 10 000 years, and has high seismic potential. Our tomographic analysis clarified the heterogeneous crustal structure along the MTL active fault system. This fault system in Shikoku can be divided into two segments, an east segment and a west segment, on the basis of the velocity structure. This segmentation model is consistent with other such models that have been determined from geological and geomorphological data such as fault geometry, slip rate, and faulting history. This consistency suggests that the surface characteristics of the MTL active fault system are related to structural properties of the crust. In particular, a prominent low-velocity (low-V) zone is present in the lower crust beneath the east segment. Our tomographic images show that the lower crust structure beneath the east segment is obviously different from that of the other segment. Furthermore, this low-V zone may indicate the presence of fluid, possibly related to dehydration of the PHS slab. As the presence of fluid in the lower crust affects the activity of the fault, stress accumulation and the fault failure mechanism may differ between the two segments of the MTL active fault system.  相似文献   

10.
The Woodlark Basin, located south of the Solomon Islands arc region, is a young (5 Ma) oceanic basin that subducts beneath the New Britain Trench. This region is one of only a few subduction zones in the world where it is possible to study a young plate subduction of several Ma. To obtain the image of the subducting slab at the western side of the Woodlark Basin, a 40-day Ocean Bottom Seismometer (OBS) survey was conducted in 1998 to detect the micro-seismic activity. It was the first time such a survey had been performed in this location and over 600 hypocenters were located. The seismic activity is concentrated at the 10–60 km depth range along the plate boundary. The upper limit just about coincides with the leading edge of the accretionary wedge. The upper limit boundary was identified as the up-dip limit of the seismogenic zone, whereas the down-dip limit of the seismogenic zone was difficult to define. The dip angle of the plate at the high seismicity zone was found to average about 30°. Using the Cascadia subduction zone for comparison, which is a typical example of a young plate subduction, suggests that the subduction of the Woodlark Basin was differentiated by a high dip angle and rather landward location of the seismic front from the trench axis (30 km landward from the trench axis). Furthermore, as pointed out by previous researchers, the convergent margin of the Solomon Islands region is imposed with a high stress state, probably due to the collision of the Ontong Java Plateau and a rather rapid convergence rate (10 cm/year). The results of the high angle plate subduction and inner crust earthquakes beneath the Shortland Basin strongly support the high stress state. The collision of the Ontong Java Plateau, the relatively rapid convergence rate, and moderately cold slab as evidenced by low heat flow, rather than the plate age, may be dominantly responsible for the geometry of the seismogenic zone in the western part of the Woodlark Basin subduction zone.  相似文献   

11.
利用日本气象厅(JMA)以及日本国立大学联合地震观测台网(JUNEC)记录到的3218个地震事件的231918条P波到时资料,反演求得西南日本160km深度范围内的三维P波速度结构。研究表明,在九州地区,俯冲的菲律宾海板块以高速为主要特征,该海洋板块在30～60km深度处的脱水使得弧前地幔楔顶端的橄榄石蛇纹岩化,在120km深度处的脱水使得地幔楔中的岩石局部熔融,融体上升引起该区的火山活动。在本州西部地区大山火山之下,低速异常显著,并伴随低频地震活动,说明该火山可能是个潜在的活火山,将来有喷发的可能性。  相似文献   

12.
《Gondwana Research》2010,17(3-4):401-413
We present new pieces of evidence from seismology and mineral physics for the existence of low-velocity zones in the deep part of the upper mantle wedge and the mantle transition zone that are caused by fluids from the deep subduction and deep dehydration of the Pacific and Philippine Sea slabs under western Pacific and East Asia. The Pacific slab is subducting beneath the Japan Islands and Japan Sea with intermediate-depth and deep earthquakes down to 600 km depth under the East Asia margin, and the slab becomes stagnant in the mantle transition zone under East China. The western edge of the stagnant Pacific slab is roughly coincident with the NE–SW Daxing'Anling-Taihangshan gravity lineament located west of Beijing, approximately 2000 km away from the Japan Trench. The upper mantle above the stagnant slab under East Asia forms a big mantle wedge (BMW). Corner flow in the BMW and deep slab dehydration may have caused asthenospheric upwelling, lithospheric thinning, continental rift systems, and intraplate volcanism in Northeast Asia. The Philippine Sea slab has subducted down to the mantle transition zone depth under Western Japan and Ryukyu back-arc, though the seismicity within the slab occurs only down to 200–300 km depths. Combining with the corner flow in the mantle wedge, deep dehydration of the subducting Pacific slab has affected the morphology of the subducting Philippine Sea slab and its seismicity under Southwest Japan. Slow anomalies are also found in the mantle under the subducting Pacific slab, which may represent small mantle plumes, or hot upwelling associated with the deep slab subduction. Slab dehydration may also take place after a continental plate subducts into the mantle.  相似文献   

13.
The Pacific plate and the Philippine Sea plate overlap and subduct underneath the Kanto region, central Japan, causing complex seismic activities in the upper mantle. In this research, we used a map selection tool with a graphic display to create a data set for earthquakes caused by the subducting motion of the Philippine Sea plate that are easily determined. As a result, we determined that there are at least four earthquake groups present in the upper mantle above the Pacific plate. Major seismic activity (Group 1) has been observed throughout the Kanto region and is considered to originate in the uppermost part of mantle in the subducted Philippine Sea plate, judging from the formation of the focal region and comparison with the 3D structure of seismic velocity. The focal mechanism of these earthquakes is characterized by the down-dip compression. A second earthquake layer characterized by down-dip extension (Group 2), below the earthquakes in this group, is also noted. The focal region for those earthquakes is considered to be located at the lower part of the slab mantle, and the Pacific plate located directly below is considered to influence the activity. Earthquakes located at the shallowest part (Group 3) form a few clusters distributed directly above the Group 1 focal region. Judging from the characteristics of later phases in these earthquakes and comparing against the 3D structure of seismic velocity, the focal regions for the earthquakes are considered to be located near the upper surface of the slab. Another earthquake group (Group 4) originates further below Group 2; it is difficult to consider these earthquakes within a single slab. The seismic activities representing the upper area of the Philippine Sea plate are Group 3. This paper proposes a slab geometry model that is substantially different from conventional models by strictly differentiating the groups.  相似文献   

14.
Cenka Christova   《Tectonophysics》2004,384(1-4):175-189
The study addresses the space distribution of the stress field in the Kyushu–Ryukyu Wadati–Benioff zone based on homogeneous data of earthquake focal mechanisms and the inverse technique by Gephart and Forsyth [J. Geophys. Res. 89 (1984) 9305]. The used data set consists of 148 Harvard CMT solutions and 22 earthquake focal mechanisms listed in previous studies. The stress field parameters are determined for 0–40, 41–100 and h>100 km depth ranges. The top 100-km layer of the Wadati–Benioff zone (WBZ) is characterized by strike normal maximum compression σ1 and steeper than the slab minimum compression σ3, the last indicating for unbalanced slab pull force. The Tokara channel ‘divides’ the subduction into two parts of different stress regime at depth greater than 100 km. To the south of the channel the slab is under slab parallel σ1 and slab normal σ3 while its northern part, beneath Kyushu, is under slab parallel extension and slab normal compression. The results of recent studies on the regional velocity structure and geochemistry of the volcanic lava indicate that the most plausible reason for the observed stress field difference below 100 km in the northern and rest part of the arc is the presence of hot low viscosity upper mantle west of Kyushu.The results of this study indicate that the forces involved in the contemporary subduction dynamics in the Ryukyu–Kyushu Wadati–Benioff zone are related to the convergence between the Philippine Sea Plate and the Eurasian plate, the trench suction force, slab pull, the slab anchor force and, in the southern-central part of the arc, mantle resistance.  相似文献   

15.
We determine detailed 3-D Vp and Vs structures of the crust and uppermost mantle beneath the Kyushu Island, southwest Japan, using a large number of arrival times from local earthquakes. From the obtained Vp and Vs models, we further calculate Poisson’s ratio images beneath the study area. By using this large data set, we successfully image the 3-D seismic velocity and Poisson’s ratio structures beneath Kyushu down to a depth of 150 km with a more reliable spatial resolution than previous studies. Our results show very clear low Vp and low Vs anomalies in the crust and uppermost mantle beneath the northern volcanoes, such as Abu, Kujyu and Unzen. Low-velocity anomalies are seen in the mantle beneath most other volcanoes. In contrast, there are no significant low-velocity anomalies in the crust or in the upper mantle between Aso and Kirishima. The subducting Philippine Sea slab is imaged generally as a high-velocity anomaly down to a depth of 150 km with some patches of normal to low seismic wave velocities. The Poisson’s ratio is almost normal beneath most volcanoes. The crustal seismicity is distributed in both the high- and low-velocity zones, but most distinctly in the low Poisson’s ratio zone. A high Poisson’s ratio region is found in the forearc crustal wedge above the slab in the junction area with Shikoku and Honshu; this high Poisson’s ratio could be caused by fluid-filled cracks induced by dehydration from the Philippine Sea slab. The Poisson’s ratio is normal to low in the forearc mantle in middle-south Kyushu. This is consistent with the absence of low-frequency tremors, and may indicate that dehydration from the subducting crust is not vigorous in this region.  相似文献   

16.
We evaluate the pressure–temperature (P–T) conditions of ongoing regional metamorphism at the top of the oceanic crust of the subducted Pacific and Philippine Sea plates through a combination of phase diagrams and hypocenter distribution and based on the dehydration-induced earthquake hypothesis. The brute-force method was employed to find the best match thermal structure to link the hypocenter distribution and dehydration. The estimated thermal structure varies far from the values obtained from numerical simulation. Our estimates are consistent with the qualitative physical prediction for the variation of temperature in different subduction zones and provide quantitative constraints for the models.In northeastern Japan, the P–T path for the top of the oceanic crust turns to the high-T side at a depth of around 90 km. The depth corresponds to the location of the volcanic front and an active convection of the wedge mantle below this depth is suggested. Our computations also reveal the effect of an exceptional scenario beneath the Kanto region. The temperature in the Kanto region, where the cold lid of the Philippine Sea plate prevents heating by the return-flow of mantle wedge above, is much lower than that of northeastern Japan. The subduction of younger Philippine Sea plate leads to a higher-temperature in the oceanic crust. In the central Shikoku region, the thermal structure exhibits high-T/P nature. Heating by shear deformation can explain the high-T/P path in the depth range from 20 to 35 km. The Kyushu area shows moderate type T/P path reaching up to eclogite facies conditions. In the Kii and central Shikoku region, the thermal structure exhibits high-T/P nature. However, the absolute values for the areas seem to have problem in physical context. Our results has risen the significance of sediment subduction in the southwest Japan and requirement for further improvements in this technique including the aspect of variation of the bulk composition of the subducted material.  相似文献   

17.
《Gondwana Research》2010,17(3-4):458-469
We evaluate the pressure–temperature (P–T) conditions of ongoing regional metamorphism at the top of the oceanic crust of the subducted Pacific and Philippine Sea plates through a combination of phase diagrams and hypocenter distribution and based on the dehydration-induced earthquake hypothesis. The brute-force method was employed to find the best match thermal structure to link the hypocenter distribution and dehydration. The estimated thermal structure varies far from the values obtained from numerical simulation. Our estimates are consistent with the qualitative physical prediction for the variation of temperature in different subduction zones and provide quantitative constraints for the models.In northeastern Japan, the P–T path for the top of the oceanic crust turns to the high-T side at a depth of around 90 km. The depth corresponds to the location of the volcanic front and an active convection of the wedge mantle below this depth is suggested. Our computations also reveal the effect of an exceptional scenario beneath the Kanto region. The temperature in the Kanto region, where the cold lid of the Philippine Sea plate prevents heating by the return-flow of mantle wedge above, is much lower than that of northeastern Japan. The subduction of younger Philippine Sea plate leads to a higher-temperature in the oceanic crust. In the central Shikoku region, the thermal structure exhibits high-T/P nature. Heating by shear deformation can explain the high-T/P path in the depth range from 20 to 35 km. The Kyushu area shows moderate type T/P path reaching up to eclogite facies conditions. In the Kii and central Shikoku region, the thermal structure exhibits high-T/P nature. However, the absolute values for the areas seem to have problem in physical context. Our results has risen the significance of sediment subduction in the southwest Japan and requirement for further improvements in this technique including the aspect of variation of the bulk composition of the subducted material.  相似文献   

18.
Data from the nation-wide GPS continuous tracking network that has been operated by the Geographical Survey Institute of Japan since April 1996 were used to study crustal deformation in the Japanese Islands. We first extracted site coordinate from daily SINEX files for the period from April 1, 1996 to February 24, 2001. Since raw time series of station coordinates include coseismic and postseismic displacements as well as seasonal variation, we model each time series as a combination of linear and trigonometric functions and jumps for episodic events. Estimated velocities were converted into a kinematic reference frame [Heki, K., 1996. Horizontal and vertical crustal movements from three-dimensional very long baseline interferometry kinematic reference frame: implication for reversal timescale revision. J. Geophys. Res., 101: 3187–3198.] to discuss the crustal deformation relative to the stable interior of the Eurasian plate. A Least-Squares Prediction technique has been used to segregate the signal and noise in horizontal as well as vertical velocities. Estimated horizontal signals (horizontal displacement rates) were then differentiated in space to calculate principal components of strain. Dilatations, maximum shear strains, and principal axes of strain clearly portray tectonic environments of the Japanese Islands. On the other hand, the interseismic vertical deformation field of the Japanese islands is derived for the same GPS data interval. The GPS vertical velocities are combined with 31 year tide gage records to estimate absolute vertical velocity. The results of vertical deformation show that (1) the existence of clear uplift of about 6 mm/yr in Shikoku and Kii Peninsula, whereas pattern of subsidence is observed in the coast of Kyushu district. This might reflect strong coupling between the Philippine Sea plate and overriding plate at the Nankai Trough and weak coupling off Kyushu, (2) no clear vertical deformation pattern exists along the Pacific coast of northeastern Japan. This might be due to the long distance between the plate boundary (Japan trench) and overriding plate where GPS sites are located, (3) significant uplift is observed in the southwestern part of Hokkaido and in northeastern Tohoku along the Japan Sea coast. This is possibly due to the viscoelastic rebound of the 1983 Japan Sea (Mw 7.7) and the 1993 Hokkaido–Nansei–Oki (Mw 7.8) earthquakes and/or associated with distributed compression of incipient subduction there. We then estimate the elastic deformation of the Japanese Islands caused by interseismic loading of the Pacific and Philippine Sea subduction plates. The elastic models account for most of the observed horizontal velocity field if the subduction movement of the Philippine Sea Plate is 100% locked and if that of the Pacific Plate is 70% locked. However, the best fit for vertical velocity ranges from 80% to 100% coupling factor in southwestern Japan and only 50% in northeastern Japan. Since horizontal data does not permit the separation of rigid plate motion and interplate coupling because horizontal velocities include both contributions, we used the vertical velocities to discriminate between them. So, we can say there is strong interplate coupling (80%–100%) over the Nankaido subduction zone, whereas it is about 50% only over the Kurile–Japan trench.  相似文献   

19.
We present a model of the subducting Cocos slab beneath Central Mexico, that provides an explanation for stresses causing the occurrence of the majority of the intraslab earthquakes which are concentrated in a long flat segment. Based on the recently developed thermal models for the Central Mexico subduction zone, the thermal stresses due to non-uniform temperature contrast in the subducting slab are calculated using a finite element approach. The slab is considered purely elastic but due to high temperature at its bottom the behavior is considered as ductile creep. The calculation results show a  20 km slab core characterized by a tensional state of stress with stresses up to 70 MPa. On the other hand, the top of the slab experiences high compressive thermal stresses up to 110 MPa, depending on the elastic constants used and location along the flat part of the subducting plate. These compressive stresses at the top of the slab are not consistent with the exclusive normal fault intraslab earthquakes, and two different sources of stress are proposed.

The trenchward migration of the Mexican volcanic arc for the last 7 Ma indicates an increase of the slab dip through time. This observation suggests that the gravity torque might exceed the suction torque. Considering the flat slab as an embedded plate subject to an applied clockwise net torque of 0.5 × 1016–1.5 × 1016 N m, the upper half would exhibit tensional stresses of 40–110 MPa that can actually balance the compressive thermally induced stresses.

An alternative stress source might come from the slab pull force caused by the slab positive density anomaly. Based on our density anomaly estimations (75 ± 20 kg/m3), a 350 km slab length, dipping at 20° into the asthenosphere, induces a slab pull force of 1.7 × 1012–4.6 × 1012 N m. This force produces a tensional stress of 41–114 MPa, sufficient to balance the compressive thermal stresses at the top of the flat slab.

The linear superposition of the thermally and torque or slab pull induced stresses shows tensile stresses up to 60–180 MPa inside the flat slab core. Also, our results suggest that the majority of the intraslab earthquakes inside the flat slab are situated where the resultant stresses are larger than 40–80 MPa.

This study provides a reasonable explanation for the existence of exclusively normal fault intraslab earthquakes in the flat slab beneath Central Mexico, and also it shows that thermal stresses due to non-uniform reheating of subducting slabs play a considerable role in the total stress field.  相似文献   


20.
Kyushu Island, Japan, is located at the junction of the Southwest Japan arc and the Ryukyu arc. There are two major late Cenozoic epithermal gold-silver provinces in Kyushu, which are termed the Northern and Southern provinces. The provinces are characterized by: 1) Pliocene volcanism dominated by calc-alkaline andesite, followed by Quaternary volcanism including extrusion of both calc-alkaline and tholeiitic magmas; 2) formation of extensional grabens; 3) Pliocene to Pleistocene mineralization, which was dominated by abundant low sulfidation (LS) epithermal deposits with a few high sulfidation (HS) examples. The two epithermal gold-silver provinces have evolved differently since about 5 Ma; the Northern province has exhibited diminished hydrothermal activity from the Pliocene to Pleistocene, whereas the Southern province has witnessed increased hydrothermal activity mainly in easterly and northerly directions. Changes of tectonic setting from the Pliocene to Pleistocene account for the variable trends in epithermal gold deposit formation. Westward oblique subduction of the Philippine Sea plate beneath the Southwest Japan arc caused development of the Hohi graben and arc-related volcanism at about 6 Ma. This was associated with widespread LS mineralization in and surrounding the Hohi graben, as is represented by the Bajo and Taio deposits. The subduction of the relatively buoyant Kyushu-Palau ridge during the early Pliocene strengthened the coupling between the slab and overriding Ryukyu arc, leading to polygenetic andesite volcanism with associated HS (Kasuga, Iwato, and Akeshi) and LS (Kushikino) mineral deposits forming in the Southern province. A change of the subduction direction of the Philippine Sea plate, from west to north-northwest in the early Pliocene, increased the orthogonal convergence rate between the Southwest Japan arc and the Philippine Sea plate, resulting in a decrease of volcanic and hydrothermal activity in the Hohi graben of the Northern province. The more northerly subduction of the Philippine Sea plate shifted the locus of the Kyushu-Palau ridge subduction northward, resulting in underplating of the older (85–60 Ma), negatively buoyant Amami basin oceanic slab in the Southern province, rather than continued subduction of the young (27–15 Ma), buoyant Shikoku basin slab. This replacement caused steepening of the slab angle and slab-rollback in the Southern province, which was associated with regional extension, an eastward shift of the Ryukyu volcanic front, and development of the Kagoshima and Shimabara grabens, as well as the Okinawa trough. Rhyolite and basalt volcanism, in addition to andesite volcanism, have occurred since 2 Ma in the area of the Ryukyu back arc; coincident LS mineralization at Hishikari and Ohkuchi was affiliated with the rhyolite volcanism. Another change of the subduction direction of the Philippine Sea plate to the northwest occurred at 2–1 Ma. The forearc sliver of the Southwest Japan arc shifted westward, in association with right-lateral strike-slip faulting along the Median tectonic line, due to the increase of the westward convergence rate. This shift resulted in shortening and cessation of graben development in the Hohi area, restricting the subsequent volcanism and related hydrothermal activity to the central part of the graben.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号