首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 56 毫秒
1.
This paper describes a new 3‐D forward numerical model (CARBONATE 3D) that simulates the stratigraphic and sedimentological development of carbonate platforms and mixed carbonate–siliciclastic shelves by simulating the following sedimentary processes: (1) Carbonate shallow, open‐marine production, dependent on water depth, restriction and sediment input; (2) Carbonate shallow, restricted‐marine production, dependent on water restriction; (3) Pelagic sediment production and deposition; (4) Coarse and fine siliciclastic input; (5) Erosion, transport and redeposition of sediment, dependent on currents, slope, depth and restriction as well as sediment grain‐size and composition; (6) Dissolution of subaerially exposed carbonate. In this paper the model is used to investigate the controlling mechanisms on the sequence stratigraphy of isolated carbonate platforms and atolls and to predict distinctive architectural signatures from different drowning mechanisms. Investigation of the mechanisms controlling atoll strata shows that although relative sea‐level is the major control, antecedent topography, environmental setting and early diagenesis have profound influence on what stratigraphic geometries and facies develop. Hence care must be taken if sea‐level curves are interpreted from real stratigraphies. Atoll drowning by fast sea‐level rise, by lowered production and by repeated exposure and fast subsequent sea‐level rises are investigated and different stratigraphic signatures for the respective mechanisms predicted. A fast relative sea‐level rise results in a bucket‐shaped morphology developed prior to drowning and a sharp transition from the platform margin facies to a pelagic cover. Drowning caused by lowered platform margin production is predicted to result in the development of a dome‐shaped, shallow‐water shoal over the whole platform top prior to drowning. Fourth order amplitudes of several tens of metres, typical of ‘icehouse’ settings, cause atoll drowning at subsidence rates where atolls subject to fourth order amplitude of only a few metres, typical of ‘greenhouse’ settings, can keep up with the rising sea‐level. In the resultant strata, vertical facies belts are less well developed but horizontally extensive facies bands are more prominent. High fourth order amplitudes (up to 80 m) without sufficient third order scale subsidence will not lead to drowning, however, as the platform can recover in each fourth order lowstand. These results suggest that atolls might be easier to drown in ‘icehouse’ rather than in ‘greenhouse’ conditions but only in situations with suitably high rates of longer‐term relative sea‐level rise or sufficient lag times.  相似文献   

2.
The evolution from Late Cretaceous to early Eocene of the well dated Amiran foreland basin in the NW Iranian Zagros Mountains is studied based on the reconstruction of successive thickness, palaeobathymetry and subsidence maps. These maps show the progressive forelandwards migration of the mixed carbonate‐siliciclastic system associated with a decrease in creation of accommodation. Carbonate facies variations across the basin suggest a structural control on the carbonate distribution in the Amiran foreland basin, which has been used as initial constraint to study the control exerted by syndepositional folding in basin architecture and evolution by means of stratigraphic numerical modelling. Modelled results show that shallow bathymetries on top of growing folds enhance carbonate production and basin compartmentalization. As a consequence, coarse clastics become restricted to the internal parts of the basin and only the fine sediments can by‐pass the bathymetric highs generated by folding. Additionally, the development of extensive carbonate platforms on top of the anticlines favours the basinwards migration of the depositional system, which progrades farther with higher fold uplift rates. In this scenario, build‐ups on top of anticlines record its growth and can be used as a dating method. Extrapolation of presented modelling results into the Amiran foreland basin is in agreement with an early folding stage in the SE Lurestan area, between the Khorramabad and Kabir Kuh anticlines. This folding stage would enhance the development of carbonate platforms on top of the anticlines, the south‐westward migration of the system and eventually, the complete filling of the basin north of the Chenareh anticline at the end of the Cuisian. Incremental thickness maps are consistent with a thin (0.4–2 km) ophiolite complex in the source area of the Amiran basin.  相似文献   

3.
Types of carbonate platforms: a genetic approach   总被引：5，自引：0，他引：5  
L. Pomar 《Basin Research》2001,13(3):313-334
  相似文献   

4.
This paper describes the evolution of an extensional basin in regard to the nature and sequence stratigraphic arrangement of its carbonate deposits. The purpose of this study is to evaluate the respective effects of tectonism, eustasy, climate and oceanography on a carbonate sedimentary record. The case study is the early to mid‐Jurassic age carbonate succession of the Southern Provence Sub‐basin (SE France), located within the southern part of the extensional Western European Tethyan Margin. This work is based on sedimentologic, biostratigraphic (using ammonites and brachiopods) and sequence stratigraphic analysis of the carbonate facies of the Cherty Reddish Limestone Formation (late Sinemurian to earliest Bajocian). These strata were deposited in shoreface to lower offshore depositional environments. The succession of the various environments together with the recognition of key stratigraphic surfaces allow us to define four second‐order depositional sequences; of late Sinemurian to earliest Pliensbachian, early Pliensbachian to late Pliensbachian, earliest Toarcian to middle Aalenian and late Aalenian to early Bathonian ages. The architecture of the depositional sequences (thickness and facies variations within the systems tracts, wedge‐shaped geometries) reflects a strong tectonic control. The sub‐basin was structured by extensional faults (oriented approximately 070–090/250–270). Sea‐level variations, fluctuations in carbonate production and preservation, and environmental changes were also significant controlling factors of the carbonate deposition. The interplay of the tectonic control with the other factors resulted in five main phases in the sedimentary evolution of the sub‐basin: (1) dominant tectonic control during the initial rifting stage (late Sinemurian to early Pliensbachian); (2) increasing extensional tectonics (mid‐Pliensbachian); (3) global climato‐eustatic sea‐level fall (latest Pliensbachian) and global climato‐eustatic sea‐level rise plus hypoxia/anoxia (early Toarcian); (4) relative sea‐level fall linked to tectonic uplift related to the ‘Mid‐Cimmerian phase’ (mid‐Aalenian) and (5) oceanographic events (upwelling) and reduction in carbonate production (hypoxia/anoxia) plus tectonic downwarping (late Aalenian/earliest Bajocian).  相似文献   

5.
This paper presents a detailed analysis of the top of the Messinian evaporites (Horizon M) in the Levant region, offshore Israel, based on the integration of three‐dimensional (3D)/2D seismic and well data. 3D mapping of a series of intra‐evaporite horizons and their termination against Horizon M provides new insights into the depositional setting and structural evolution of this saline giant system. New evidence of a discordant relationship between the intra‐evaporite horizons and the top of the Messinian evaporites (Horizon M) is given by the seismic stratigraphic analysis. This confirms that the top of the Messinian evaporites represents an erosional unconformity of semiregional extent in the Levant region. The truncation of the folded and faulted intra‐evaporite horizons indicates for the first time a Messinian phase of evaporite deformation, i.e. pre‐dating the well‐documented Plio‐Pleistocene thin‐skinned tectonic phase in the region. This major erosional unconformity is interpreted as subaerial in origin, documenting the exposure of the evaporitic system at the end of the Messinian Salinity Crisis. These results give new evidence for the understanding of the events occurring during the last stages of the Messinian Salinity Crisis in the region.  相似文献   

6.
Rift basin tectono‐stratigraphic models indicate that normal fault growth controls the sedimentology and stratigraphic architecture of syn‐rift deposits. However, such models have rarely been tested by observations from natural examples and thus remain largely conceptual. In this study we integrate 3D seismic reflection, and biostratigraphically constrained core and wireline log data from the Vingleia Fault Complex, Halten Terrace, offshore Mid‐Norway to test rift basin tectono‐stratigraphic models. The geometry of the basin‐bounding fault and its hangingwall, and the syn‐rift stratal architecture, vary along strike. The fault is planar along a much of its length, bounding a half‐graben containing a faultward‐thickening syn‐rift wedge. Locally, however, the fault has a ramp‐flat‐ramp geometry, with the hangingwall defined by a fault‐parallel anticline‐syncline pair. Here, an unusual bipartite syn‐rift architecture is observed, comprising a lower faultward‐expanding and an upper faultward‐thinning wedge. Fine‐grained basinfloor deposits dominate the syn‐rift succession, although isolated coarse clastics occur. The spatial and temporal distribution of these coarse clastics is complex due to syn‐depositional movement on the Vingleia Fault Complex. High rates of accommodation generation in the fault hangingwall led to aggradational stacking of fan deltas that rapidly (<5 km) pinch out basinward into offshore mudstone. In the south of the basin, rapid strain localization meant that relay ramps were short‐lived and did not represent major, long‐lived sediment entry points. In contrast, in the north, strain localization occurred later in the rift event, thus progradational shorefaces developed and persisted for a relatively long time in relay ramps developed between unlinked fault segments. The footwall of the Vingleia Fault Complex was characterized by relatively low rates of accommodation generation, with relatively thin, progradational hangingwall shorelines developed downdip of the fault block apex, sometime after the onset of sediment supply to the hangingwall. We show that rift basin tectono‐stratigraphic models need modifying to take into account along‐strike variability in fault structure and basin physiography, and the timing and style of syn‐rift sediment dispersal and facies, in both hangingwall and footwall locations.  相似文献   

7.
The Pennsylvanian marine foreland basin of the Cantabrian Zone (NW Spain) is characterized by the unique development of kilometre‐size and hundred‐metre‐thick carbonate platforms adjacent to deltaic systems. During Moscovian time, progradational clastic wedges fed by the orogen comprised proximal alluvial conglomerates and coal‐bearing deltaic sequences to distal shelfal marine deposits associated with carbonate platforms (Escalada Fm.) and distal clay‐rich submarine slopes. A first phase of carbonate platform development (Escalada I, upper Kashirian‐lower Podolskian) reached a thickness of 400 m, nearly 50 km in width and developed a distal high‐relief margin facing a starved basin, nearly 1000‐m deep. Carbonate slope clinoforms dipped up to 30° and consisted of in situ microbial boundstone, pinching out downslope into calciturbidites, argillaceous spiculites and breccias. The second carbonate platform (Escalada II, upper Podolskian‐lower Myachkovian) developed beyond the previous platform margin, following the basinward progradation of siliciclastic deposits. Both carbonate platforms include: (1) a lower part composed of siliciclastic‐carbonate cyclothems characterized by coated‐grain and ooid grainstones; and (2) a carbonate‐dominated upper part, composed of tabular and mound‐shaped wackestone and algal‐microbial boundstone strata alternating at the decametre scale with skeletal and coated‐grain grainstone beds. Carbonate platforms initiated in distal sectors of the foreland marine shelf during transgressions, when terrigenous sediments were stored in the proximal part, and developed further during highstands of 3rd‐order sequences in a high‐subsidence context. During the falling stage and lowstand systems tracts, deltaic systems prograded across the shelf burying the carbonate platforms. Key factors involved in the development of these unique carbonate platforms in an active foreland basin are: (1) the large size of the marine shelf (approaching 200 km in width); (2) the subsidence distribution pattern across the marine shelf, decreasing from proximal shoreline to distal sectors; (3) Pennsylvanian glacio‐eustacy affecting carbonate lithofacies architecture; and (4) the environmental conditions optimal for fostering microbial and algal carbonate factories.  相似文献   

8.
“Salt” giants are typically halite‐dominated, although they invariably contain other evaporite (e.g. anhydrite, bittern salts) and non‐evaporite (e.g. carbonate, clastic) rocks. Rheological differences between these rocks mean they impact or respond to rift‐related, upper crustal deformation in different ways. Our understanding of basin‐scale lithology variations in ancient salt giants, what controls this and how this impacts later rift‐related deformation, is poor, principally due to a lack of subsurface datasets of sufficiently regional extent. Here we use 2D seismic reflection and borehole data from offshore Norway to map compositional variations within the Zechstein Supergroup (ZSG) (Lopingian), relating this to the structural styles developed during Middle Jurassic‐to‐Early Cretaceous rifting. Based on the proportion of halite, we identify and map four intrasalt depositional zones (sensu Clark et al., Journal of the Geological Society, 1998, 155, 663) offshore Norway. We show that, at the basin margins, the ZSG is carbonate‐dominated, whereas towards the basin centre, it becomes increasingly halite‐dominated, a trend observed in the UK sector of the North Sea Basin and in other ancient salt giants. However, we also document abrupt, large magnitude compositional and thickness variations adjacent to large, intra‐basin normal faults; for example, thin, carbonate‐dominated successions occur on fault‐bounded footwall highs, whereas thick, halite‐dominated successions occur only a few kilometres away in adjacent depocentres. It is presently unclear if this variability reflects variations in syn‐depositional relief related to flooding of an underfilled presalt (Early Permian) rift or syn‐depositional (Lopingian) rift‐related faulting. Irrespective of the underlying controls, variations in salt composition and thickness influenced the Middle Jurassic‐to‐Early Cretaceous rift structural style, with diapirism characterising hangingwall basins where autochthonous salt was thick and halite‐rich and salt‐detached normal faulting occurring on the basin margins and on intra‐basin structural highs where the salt was too thin and/or halite‐poor to undergo diapirism. This variability is currently not captured by existing tectono‐stratigraphic models largely based on observations from salt‐free rifts and, we argue, mapping of suprasalt structural styles may provide insights into salt composition and thickness in areas where boreholes are lacking or seismic imaging is poor.  相似文献   

9.
A quantitative stratigraphic model of mixed carbonate/siliciclastic continental shelves is presented to investigate the relationships between depositional processes and stratigraphic responses at long‐term, large spatial scales. A diffusion model is combined with a fluid‐flow approach to simulate both long‐term factors, i.e. the processes controlling large‐scale architecture, and short‐term processes, i.e. sediment redistribution by storms. Any net sediment accumulation is the result of the succession of a storm and a fair‐weather period. Sediments are mobilized by waves and advected by low‐frequency currents during storm events. Sediments are then reworked and redistributed downslope by diffusive processes during fair‐weather period. The results are successful in capturing several major characteristics of both modern and ancient depositional systems (geometry, differential preservation, net accumulation rates). The study highlights the importance of waves and unidirectional currents. Depositional geometry and shelf morphology depend on the balance between available sediment supply (generated in situ or detrital) and the transport energy, which is related to the style of sediment transport (diffusive or advective), and to the magnitude and frequency of storms.  相似文献   

10.
Recent scientific work has highlighted the presence of an up to 12 km thick Cenozoic siliclastic and carbonate infill in the Levant Basin. Since the Late Eocene, several regional geodynamic events affecting Afro‐Arabia and Eurasia (collision and strike slip deformation) induced marginal uplifts. The initiation of local and long‐lived regional drainage systems in the Oligo‐Miocene period (e.g., Lebanon, Arabia and Nile) provoked a change in the depositional pattern along the Levant region from carbonate‐dominated to mixed clastic‐rich systems. Herein, we explore the importance of multi‐scale constraints (i.e., seismic, well and field data) in the quantification of subsidence history, sediment transport and deposition of a Middle to Upper Miocene “multi‐source” to sink system along the northern Levant frontier region. Through a comprehensive 4D forward stratigraphic modelling workflow, we suggest that the contribution to basin infill is split between proximal and more distal clastic sources as well as in situ carbonate and hemipelagic deposition. The results show that single‐source scenarios could not reasonably satisfy the basin‐scale constraints. The worldwide application of such new multi‐disciplinary workflows in frontier regions highlights the additional data constraints that are needed to de‐risk highly uncertain geological models in the hydrocarbon exploration phase.  相似文献   

11.
Forward stratigraphic models usually display sediment types on simulated stratigraphic profiles as ‘facies’ defined only by their depth of deposition. More recently, ‘facies’ have been defined and displayed in terms of the dominant processes of deposition (e.g. in situ growth, pelagic production, turbidite deposition). Standard carbonate facies; that is, the Dunham classification, are defined by rock textures and grain composition that imply that a combination of processes acted together to generate a facies. For example, a bioclastic wackestone is a matrix‐supported rock containing up to 90% matrix and > 10% shelly grains. In terms of modelled processes, the muddy matrix could be generated by: (i) reworking of the shallow platform sediments, (ii) from pelagic deposition, or (iii) in situ production. A traditional depth of deposition process display would not be able to distinguish such a wackestone from any other facies deposited at this water depth and a majority process display would not combine reworked, pelagic muds and in situ contribution in one simulated ‘facies’. This paper introduces a new scheme that enables forward models to output simulated facies defined by a range of values for each of the controlling processes and thereby predicts rock textures within simulated stratigraphies. This approach has been applied to the Jurassic carbonate ramps of the Iberian Basin in northeastern Spain. It is shown to provide more accurate information about the processes that are being simulated, allowing more direct comparisons to be made with the facies observed in the field and providing potential for a more rigorous method for assessing the ‘goodness of fit’ of a simulated stratigraphy.  相似文献   

12.
Following the Acadian Orogeny, Atlantic Canada accommodated several, large, relatively deep lakes within a wrench-fault basin complex called the Maritime Basin. Late Devonian and Tournaisian lakes were hydrologically open, shallow to deep, mainly fresh water bodies. Middle Visean lakes, here collectively called Loch Macumber, were closed, deep, and meromictic. Their deposits comprise the first and thickest of five sequences in the Maritime Basin. Salinity in the loch increased with time from restricted marine or penesaline, to saline. Basin-centre facies consist of a thin, but extensive, sheet of black, peloidal laminated lime mudstones and an overlying thick evaporite complex. The carbonate sheet grades laterally into both laminated to thinly bedded marlstones, siliciclastic sandstones, and microbial, biocementstone mounds. Laminae consist of alternating carbonate and either silty carbonaceous shale or siliciclastic clay and silt. The mudstone and marlstone are locally interbedded with siliciclastic and carbonate turbidites, resedimented (?deep water) breccias, and olistostromes. Seasonal changes in anoxia and/or carbonate production produced rhythmic laminae of carbonate and carbonaceous shale. Carbonate grains consist of silt-sized microbial clots and rare arthropod carapaces and brachiopod shells. The mounds originated as tufa precipitated around subaqueous hydrothermal springs that supported chemosynthetic communities. Resedimentation processes including incipient brecciation, sliding, slumping, debris flows, and turbidity currents were common. The mounds trapped hydrocarbons from the surrounding laminite and sulphides from underlying hydrothermal vents. Increasing salinity with time resulted in sulphate and chloride precipitation that filled the basins and ended the life of Loch Macumber. After the deposition of thick evaporites the topography became less accentuated, the seas less saline, and the faunas more normal marine.  相似文献   

13.
The sequence architecture and depositional evolution of the Ordovician carbonate platform margins in the Tarim Basin, China, were formed in response to the interplay of tectonism and sea‐level change, their history being documented by the integrated analysis of many seismic lines, drilling and outcrop data. The Ordovician carbonate system in the basin is divided into four composite sequences defined by major unconformities. Each sequence consists of a regional depositional cycle from transgression with an onlapping transgressive systems tract (TST) to regression with a prograding highstand systems tract (HST), and can be further subdivided into 10 third‐order sequences based on subordinate discontinuous boundaries at the carbonate platform marginal zones. Constrained by the marginal slope of the early‐rifted Manjiaer aulacogen, the carbonate platform margins of the Lower and Middle Ordovician that prograded eastward in an arcuate belt extending generally north‐south across the northern part of the basin. The development of the Tazhong uplift due to compression resulted in an extensive paleokarst hiatus between the Middle and the Upper Ordovician in the south‐central basin, and subsequently constrained the formation of a peninsula‐shaped carbonate platform whose margins were controlled by marginal thrust‐fault belts of the paleo‐uplift during the Late Ordovician. In the northern basin, the Late Ordovician carbonate platform margin developed around the marginal slope of the Tabei paleouplift. The transgressive–regressive cycles of the carbonate system are comparable and seem to have occurred simultaneously across the entire basin, suggesting that the cyclic sequence architecture was fundamentally controlled by eustatic fluctuations. Stacking patterns of the composite sequences varied due to the interplay between the accommodation produced by tectonism and sea‐level change, and the carbonate production rate. The reef–shoal facies complexes that developed along the platform margins, with paleokarst development at unconformities, constitute the major reservoir of large petroleum reserves in the basin.  相似文献   

14.
The Eocene–Miocene carbonate deposition in the Gulf of Papua (GoP) corresponds to the carbonate evolution phase of this continental margin mixed depositional system. Global sea‐level (eustatic) fluctuations appear to have been the most important factor influencing the mixed depositional system development during its carbonate phase. Development of the major carbonate system in the Gulf was initiated during the Eocene. Subsequent to an early Oligocene hiatus, the carbonate system expanded its surface area, vertically aggraded, then systematically backstepped, and finally partially drowned during the late Oligocene–early part of the early Miocene. During the late early Miocene–early middle Miocene, the carbonate system continued its vertical growth in most platform areas, where it was able to keep up with sea‐level rise. At the early middle/late middle Miocene (Langhian/Serravallian) boundary, carbonate deposition shifted downward during a long‐term sea‐level regression, exposing most of the early middle Miocene platform tops. Following this downward shift, active carbonate production became restricted during the late middle Miocene to only the northeastern part of the study area, and carbonate accumulation was characterized by four systematically prograding units. At the very beginning of the late Miocene, the platform tops were re‐flooded. The carbonate system was partially drowned, systematically backstepped, and locally aggraded during part of the late Miocene, the early Pliocene, and the Quaternary. The overall organization of the carbonate sequence geometries, observed in the GoP, display a clear pattern, often referred to as the Oligocene–Neogene stratigraphic signature. This pattern is identical to contemporaneous sedimentary patterns observed in pure carbonate systems such as in the Maldives and in the Bahamas, and also in some siliciclastic systems. Because this pattern is observed in several globally distributed locations, the recognition of the Oligocene–Neogene stratigraphic signature in the GoP demonstrates that the depositional evolution during the late Oligocene–Miocene and the early Pliocene must have been dominantly controlled by eustatic fluctuations.  相似文献   

15.
Foreland basin strata provide an opportunity to review the depositional response of alluvial systems to unsteady tectonic load variations at convergent plate margins. The lower Breathitt Group of the Pocahontas Basin, a sub‐basin of the Central Appalachian Basin, in Virginia preserves an Early Pennsylvanian record of sedimentation during initial foreland basin subsidence of the Alleghanian orogeny. Utilizing fluvial facies distributions and long‐term stacking patterns within the context of an ancient, marginal‐marine foreland basin provides stratigraphic evidence to disentangle a recurring, low‐frequency residual tectonic signature from high‐frequency glacioeustatic events. Results from basin‐wide facies analysis, corroborated with petrography and detrital zircon geochronology, support a two end‐member depositional system of coexisting transverse and longitudinal alluvial systems infilling the foredeep during eustatic lowstands. Provenance data suggest that sediment was derived from low‐grade metamorphic Grenvillian‐Avalonian terranes and recycling of older Palaeozoic sedimentary rocks uplifted as part of the Alleghanian orogen and Archean‐Superior‐Province. Immature sediments, including lithic sandstone bodies, were deposited within a SE‐NW oriented transverse drainage system. Quartzarenites were deposited within a strike‐parallel NE‐SW oriented axial drainage, forming elongate belts along the western basin margin. These mature quartzarenites were deposited within a braided fluvial system that originated from a northerly cratonic source area. Integrating subsurface and sandstone provenance data indicates significant, repeated palaeogeographical shifts in alluvial facies distribution. Distinct wedges comprising composite sequences are bounded by successive shifts in alluvial facies and define three low‐frequency tectonic accommodation cycles. The proposed tectonic accommodation cycles provide an explanation for the recognized low‐frequency composite sequences, defining short‐term episodes of unsteady westward migration of the flexural Appalachian Basin and constrain the relative timing of deformation events during cratonward progression of the Alleghanian orogenic wedge.  相似文献   

16.
This paper develops a tectono‐stratigraphic model for the evolution and drowning of Early Jurassic carbonate platforms. The model arises from outcrop analysis and Sr isotope dating of successions exposed in the Betic Cordillera in southeastern Spain. Here, an extensive Early Jurassic (Sinemurian) carbonate platform developed on the rifted Tethyan margin of the Iberian Plate. The platform was dissected by extensional faults in early jamesoni times (ca. 191 Ma) and again in late ibex times (ca.188 Ma) during the Pliensbachian stage. Extensional faults and fault block rotation are shown to control the formation of three sequence boundaries that divide the platform stratigraphy (the Gavilan Formation) into three depositional sequences. The last sequence boundary marks localised drowning of the platform and deposition of the deeper water Zegri Formation, whereas adjacent platforms remain exposed or continue as the site of shallow‐marine sediment accumulation. This study is based on mapping, facies analysis and dating of platform carbonates exposed in three tectonic units within the zone: Gabar, Ponce and Canteras. Facies analysis leads to the recognition of facies associations deposited in carbonate ramp environments and adjacent to synsedimentary, marine, fault scarps. Sr isotope dating enables us to correlate platform‐top carbonates from the different tectonic units at a precision equivalent to ammonite zones. A sequence stratigraphic analysis of sections from the three tectonic units is carried out using the facies models together with the Sr isotope dates. This analysis indicates a clear tectonic control on the development of the stratigraphy: depositional sequences vary in thickness, have wedge‐shaped geometries and vary in facies, internal geometries and systems tracts from one tectonic unit to another. Criteria characterising depositional sequences and sequence boundaries from the Gabar and Ponce units are used to establish a tectono‐stratigraphic model for carbonate platform depositional sequences and sequence boundaries in maritime rifts, which can be applied to other less well‐exposed or subsurface successions from other sedimentary basins. Onlapping transgressive and progradational highstand systems tracts are recognised on dip slope ramps. Falling stage and lowstand systems tracts are developed as thick breccia units in hangingwall areas adjacent to extensional faults. Sequence boundaries vary in character, amplitude and/or duration of sea‐level fall and persistence across the area. Some boundaries coalesce onto the Canteras unit, which remained as a relatively positive area throughout the early Pliensbachian (Carixian). The carbonate platform on the Ponce tectonic unit drowned in the latest Carixian (davoei biozone). However, the adjacent tectonic units remained emergent and developed a long‐lived sequence boundary, indicating tectonic subsidence as the major cause for platform drowning. The stratigraphic evolution of this area on the rifted southern Iberian margin indicates that a widespread restricted shallow‐water carbonate platform environment accumulating peritidal carbonates evolved with faulting to a more open‐marine setting. Sr dating indicates that this transition took place around the Sinemurian–Pliesbachian boundary and it was driven by local fault‐related subsidence together with likely post‐faulting regional subsidence.  相似文献   

17.
ABSTRACT This paper investigates syn‐rift stratigraphic architecture and facies relationships along a 7 km long strike section towards the tip of a major, basin‐bounding normal fault segment (Thal Fault) in the Suez Rift, Egypt. In this location, the fault is composed of two precursor fault strands, Gushea and Abu Ideimat, linked by a jog or transfer fault. We document a Miocene syn‐rift succession, deposited more than c. 5.5 Myr after rift initiation, that is composed of a range of carbonate‐clastic facies associated with coarse‐grained deltaic, shoreface and offshore depositional systems. Key regionally correlatable stratal surfaces within this succession define time equivalent stratal units that exhibit variability in thickness and architecture, related to the interplay of both regional and local controls, in particular, the evolution of two, small‐scale (<6 km long) precursor fault strands (Gushea and Abu Ideimat). Integration of structural and stratigraphic data indicates that the boundary (relay ramp) between these two fault strands was a relative high during much of the rift event, with hard‐linkage and considerable displacement accumulation not occurring until at least c. 7.5 Myr after rift initiation. This is because: (i) the preserved stratigraphy is thinner in the hanging wall of the strand boundary; (ii) a eustatic sea‐level fall with an amplitude of 100 m generated more than 25 m of incision at the strand boundary, a region that has a final fault displacement of c. 600 m; and (iii) the fault strand boundary persisted as a footwall low and transport pathway for coarse‐grained deltas entering the basin. This study indicates that variability in stratal thickness and stratigraphic architecture towards the tip of the Thal Fault was related to the linkage history of two small‐scale (c. 6 km long) precursor fault segments. We suggest that similar, small‐scale stratal variability may occur repeatedly along the entire length of major basin‐bounding fault segments due to the process of fault growth by the linkage of smaller scale precursor strands.  相似文献   

18.
Quantification of allogenic controls in rift basin‐fills requires analysis of multiple depositional systems because of marked along‐strike changes in depositional architecture. Here, we compare two coeval Early‐Middle Pleistocene syn‐rift fan deltas that sit 6 km apart in the hangingwall of the Pirgaki‐Mamoussia Fault, along the southern margin of the Gulf of Corinth, Greece. The Selinous fan delta is located near the fault tip and the Kerinitis fan delta towards the fault centre. Selinous and Kerinitis have comparable overall aggradational stacking patterns. Selinous comprises 15 cyclic stratal units (ca. 25 m thick), whereas at Kerinitis 11 (ca. 60 m thick) are present. Eight facies associations are identified. Fluvial and shallow water facies dominate the major stratal units in the topset region, with shelfal fine‐grained facies constituting ca. 2 m thick intervals between major topset units and thick conglomeratic foresets building down‐dip. It is possible to quantify delta build times (Selinous: 615 kyr; Kerinitis: >450 kyr) and average subsidence and equivalent sedimentation rates (Selinous: 0.65 m/kyr; Kerinitis: >1.77 m/kyr). The presence of sequence boundaries at Selinous, but their absence at Kerinitis, enables sensitivity analysis of the most uncertain variables using a numerical model, ‘Syn‐Strat’, supported by an independent unit thickness extrapolation method. Our study has three broad outcomes: (a) the first estimate of lake level change amplitude in Lake Corinth for the Early‐Middle Pleistocene (10–15 m), which can aid regional palaeoclimate studies and inform broader climate‐system models; (b) demonstration of two complementary methods to quantify faulting and base level signals in the stratigraphic record—forward modelling with Syn‐Strat and a unit thickness extrapolation—which can be applied to other rift basin‐fills; and (c) a quantitative approach to the analysis of stacking patterns and key surfaces that could be applied to stratigraphic pinch‐out assessment and cross‐hole correlations in reservoir analysis.  相似文献   

19.
The Orphan Basin, lying along the Newfoundland rifted continental margin, formed in Mesozoic time during the opening of the North Atlantic Ocean and the breakup of Iberia/Eurasia from North America. To investigate the evolution of the Orphan Basin and the factors that governed its formation, we (i) analysed the stratigraphic and crustal architecture documented by seismic data (courtesy of TGS), (ii) quantified the tectonic and thermal subsidence along a constructed geological transect, and (iii) used forward numerical modelling to understand the state of the pre‐rift lithosphere and the distribution of deformation during rifting. Our study shows that the pre‐rift lithosphere was 200‐km thick and rheologically strong (150‐km‐thick elastic plate) prior to rifting. It also indicates that extension in the Orphan Basin occurred in three distinct phases during the Jurassic, the Early Cretaceous and the Late Cretaceous. Each rifting phase is characterized by a specific crustal and subcrustal thinning configuration. Crustal deformation initiated in the eastern part of the basin during the Jurassic and migrated to the west during the Cretaceous. It was coupled with a subcrustal thinning which was reduced underneath the eastern domain and very intense in the western domains of the basin. The spatial and temporal distribution of thinning and the evolution of the lithosphere rheology through time controlled the tectonic, stratigraphic and crustal architecture that we observe today in the Orphan Basin.  相似文献   

20.
The stratigraphic, paleogeographic and tectonic evolution of the intracratonic Congo Basin in Central Africa has been revised on the basis of an integrated interpretation of gravity, magnetic and reflection seismic data, together with a literature review of papers sometimes old and difficult to access, map compilation and partial reexamination of outcrop and core samples stored in the Royal Museum for Central Africa (RMCA). The Congo Basin has a long and complex evolution starting in the Neoproterozoic and governed by the interplay of tectonic and climatic factors, in a variety of depositional environments.This multidisciplinary study involving 2D gravity and magnetic modeling as additional constraints for the interpretation of seismic profiles appears to be a powerful tool to investigate sedimentary basins where seismic data alone may be difficult to interpret. The tectonic deformations detected in the Congo Basin after the 1970–1984 hydrocarbon exploration campaign in the Democratic Republic of Congo (DRC) have been attributed to crustal contraction and basement uplift at the center of the basin, following a transpressional inversion of earlier graben structures. Two‐dimensional gravity and magnetic models run along key seismic lines suggest the presence of evaporite sequences in some of the deeper units of the stratigraphic succession, in the lateral continuity with those observed in the Mbandaka and Gilson exploration wells. The poorly defined seismic facies that led to the previous basement uplift interpretation of the crystalline basement is shown to correspond to salt‐rich formations that have been tectonically de‐stabilized. These features may be related to vertical salt‐tectonics connected to the near/far‐field effects of the late Pan‐African and the Permo‐Triassic compressive tectonic events that affected this African part of Gondwana.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号