首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
This paper investigates the tectono‐stratigraphic development of a major, segmented rift border fault (Thal Fault) during ca. 6 Myr of initial rifting in the Suez Rift, Egypt. The Thal Fault is interpreted to have evolved by the progressive linkage of at least four fault segments. We focus on two contrasting structural settings in its hangingwall: Gushea, towards the northern tip of the fault, and Musaba Salaama, ca. 20 km along‐strike to the south, towards the centre of the fault. The early syn‐rift stratigraphic succession passes upwards from continental facies, through a condensed marginal marine shell‐rich facies, into fully marine shoreface sandstone and offshore mudstone. Regionally correlatable stratal surfaces within this succession define time‐equivalent stratal units that exhibit considerable along‐strike variability in thickness and facies architecture. During the initial ca. 6 Myr of rifting, the thickest stratigraphy developed towards the centre of the array of fault segments that subsequently hard linked to form the Thal Fault. Thus, a displacement gradient existed between fault segments at the centre and tip of the fault array, suggesting that the fault segments interacted, and a fixed length was established for the fault array, at an early stage in rifting. Towards the centre of the Thal Fault the early syn‐rift succession shows pronounced thickening away from the fault and towards a series of intra‐block antithetic faults that were active for up to ca. 6 Myr. This indicates that a large proportion of fault‐controlled subsidence during the initial ca. 6 Myr of rifting occurred in the hangingwalls of antithetic intra‐block faults, and not the present‐day Thal Fault. The antithetic faults progressively switched off during rifting such that after ca. 6 Myr of rifting, fault‐activity had localised on the Thal Fault enabling it to accrue to the present‐day high level of displacement. Aspects of the development of the Thal Fault appear to be in contrast to many models of fault evolution that predict large‐displacement rift‐climax faults to have always had the greatest displacement during fault population evolution. This study has implications for tectono‐stratigraphic development during early rift basin evolution. In particular, we stress that caution must be taken when relating final rift‐climax fault structure to the early tectono‐stratigraphy, as these may differ considerably.  相似文献   

2.
Through examination of the scaling relations of faults and the use of seismic stratigraphic techniques, we demonstrate how the temporal and spatial evolution of the fault population in a half-graben basin can be accurately reconstructed. The basin bounded by the ≫62-km-long Strathspey–Brent–Statfjord fault array is located on the western flank of the Late Jurassic northern North Sea rift basin. Along-strike displacement variations, transverse fault-displacement folds and palaeo-fault tips abandoned in the hangingwall all provide evidence that the fault system comprises a hierarchy of linked palaeo-segments. The displacement variations developed while the fault was in a prelinkage, multisegment stage of its growth have not been equilibrated following fault linkage. Using the stratal architecture of synrift sediments, we date the main phase of segment linkage as latest Callovian – middle Oxfordian (10–14 Myr after rift initiation). A dense subpopulation of faults is mapped in the hangingwall to the Strathspey–Brent–Statfjord fault array. The majority of these faults are short, of low displacement and became inactive within 3–4 Myr of the beginning of the extensional event. Subsequently, only the segments of the proto-Strathspey–Brent–Statfjord fault and a conjugate array of antithetic faults located 3.5 km basinward continued to grow to define a graben-like basin geometry. Faults of the antithetic array became inactive ∼11.5 Myr into the rift event, concentrating strain on the linked Strathspey–Brent–Statfjord fault; hence, the basin evolved into a half-graben. As the rift event progressed, strain was localized on a smaller number of active structures with increased rates of displacement. The results of this study suggest that a simple model for the linkage of 2–3 fault segments may not be applicable to a complex multisegment array.  相似文献   

3.
Rift basin tectono‐stratigraphic models indicate that normal fault growth controls the sedimentology and stratigraphic architecture of syn‐rift deposits. However, such models have rarely been tested by observations from natural examples and thus remain largely conceptual. In this study we integrate 3D seismic reflection, and biostratigraphically constrained core and wireline log data from the Vingleia Fault Complex, Halten Terrace, offshore Mid‐Norway to test rift basin tectono‐stratigraphic models. The geometry of the basin‐bounding fault and its hangingwall, and the syn‐rift stratal architecture, vary along strike. The fault is planar along a much of its length, bounding a half‐graben containing a faultward‐thickening syn‐rift wedge. Locally, however, the fault has a ramp‐flat‐ramp geometry, with the hangingwall defined by a fault‐parallel anticline‐syncline pair. Here, an unusual bipartite syn‐rift architecture is observed, comprising a lower faultward‐expanding and an upper faultward‐thinning wedge. Fine‐grained basinfloor deposits dominate the syn‐rift succession, although isolated coarse clastics occur. The spatial and temporal distribution of these coarse clastics is complex due to syn‐depositional movement on the Vingleia Fault Complex. High rates of accommodation generation in the fault hangingwall led to aggradational stacking of fan deltas that rapidly (<5 km) pinch out basinward into offshore mudstone. In the south of the basin, rapid strain localization meant that relay ramps were short‐lived and did not represent major, long‐lived sediment entry points. In contrast, in the north, strain localization occurred later in the rift event, thus progradational shorefaces developed and persisted for a relatively long time in relay ramps developed between unlinked fault segments. The footwall of the Vingleia Fault Complex was characterized by relatively low rates of accommodation generation, with relatively thin, progradational hangingwall shorelines developed downdip of the fault block apex, sometime after the onset of sediment supply to the hangingwall. We show that rift basin tectono‐stratigraphic models need modifying to take into account along‐strike variability in fault structure and basin physiography, and the timing and style of syn‐rift sediment dispersal and facies, in both hangingwall and footwall locations.  相似文献   

4.
The thickness and distribution of early syn‐rift deposits record the evolution of structures accommodating the earliest phases of continental extension. However, our understanding of the detailed tectono‐sedimentary evolution of these deposits is poor, because in the subsurface, they are often deeply buried and below seismic resolution and sparsely sampled by borehole data. Furthermore, early syn‐rift deposits are typically poorly exposed in the field, being buried beneath thick, late syn‐rift and post‐rift deposits. To improve our understanding of the tectono‐sedimentary development of early syn‐rift strata during the initial stages of rifting, we examined quasi‐3D exposures in the Abura Graben, Suez Rift, Egypt. During the earliest stage of extension, forced folding above blind normal fault segments, rather than half‐graben formation adjacent to surface‐breaking faults, controlled rift physiography, accommodation development and the stratigraphic architecture of non‐marine, early syn‐rift deposits. Fluvial systems incised into underlying pre‐rift deposits and were structurally focused in the axis of the embryonic depocentre, which, at this time, was characterized by a fold‐bound syncline rather than a fault‐bound half graben. During this earliest phase of extension, sediment was sourced from the rift shoulder some 3 km to the NE of the depocentre, rather than from the crests of the flanking, intra‐basin extensional forced folds. Fault‐driven subsidence, perhaps augmented by a eustatic sea‐level rise, resulted in basin deepening and the deposition of a series of fluvial‐dominated mouth bars, which, like the preceding fluvial systems, were structurally pinned within the axis of the growing depocentre, which was still bound by extensional forced folds rather than faults. The extensional forced folds were eventually locally breached by surface‐breaking faults, resulting in the establishment of a half graben, basin deepening and the deposition of shallow marine sandstone and fan‐delta conglomerates. Because growth folding and faulting were coeval along‐strike, syn‐rift stratal units deposited at this time show a highly variable along‐strike stratigraphic architecture, locally thinning towards the growth fold but, only a few kilometres along‐strike, thickening towards the surface‐breaking fault. Despite displaying the classic early syn‐rift stratigraphic motif recording net upward‐deepening, extensional forced folding rather than surface faulting played a key role in controlling basin physiography, accommodation development, and syn‐rift stratal architecture and facies development during the early stages of extension. This structural and stratigraphic observations required to make this interpretation are relatively subtle and may go unrecognized in low‐resolution subsurface data sets.  相似文献   

5.
Quantification of allogenic controls in rift basin‐fills requires analysis of multiple depositional systems because of marked along‐strike changes in depositional architecture. Here, we compare two coeval Early‐Middle Pleistocene syn‐rift fan deltas that sit 6 km apart in the hangingwall of the Pirgaki‐Mamoussia Fault, along the southern margin of the Gulf of Corinth, Greece. The Selinous fan delta is located near the fault tip and the Kerinitis fan delta towards the fault centre. Selinous and Kerinitis have comparable overall aggradational stacking patterns. Selinous comprises 15 cyclic stratal units (ca. 25 m thick), whereas at Kerinitis 11 (ca. 60 m thick) are present. Eight facies associations are identified. Fluvial and shallow water facies dominate the major stratal units in the topset region, with shelfal fine‐grained facies constituting ca. 2 m thick intervals between major topset units and thick conglomeratic foresets building down‐dip. It is possible to quantify delta build times (Selinous: 615 kyr; Kerinitis: >450 kyr) and average subsidence and equivalent sedimentation rates (Selinous: 0.65 m/kyr; Kerinitis: >1.77 m/kyr). The presence of sequence boundaries at Selinous, but their absence at Kerinitis, enables sensitivity analysis of the most uncertain variables using a numerical model, ‘Syn‐Strat’, supported by an independent unit thickness extrapolation method. Our study has three broad outcomes: (a) the first estimate of lake level change amplitude in Lake Corinth for the Early‐Middle Pleistocene (10–15 m), which can aid regional palaeoclimate studies and inform broader climate‐system models; (b) demonstration of two complementary methods to quantify faulting and base level signals in the stratigraphic record—forward modelling with Syn‐Strat and a unit thickness extrapolation—which can be applied to other rift basin‐fills; and (c) a quantitative approach to the analysis of stacking patterns and key surfaces that could be applied to stratigraphic pinch‐out assessment and cross‐hole correlations in reservoir analysis.  相似文献   

6.
The Santa Rosa basin of northeastern Baja California is one of several transtensional basins that formed during Neogene oblique opening of the Gulf of California. The basin comprises Late Miocene to Pleistocene sedimentary and volcanic strata that define an asymmetric half‐graben above the Santa Rosa detachment, a low‐angle normal fault with ca. 4–5 km of SE‐directed displacement. Stratigraphic analysis reveals systematic basin‐scale facies variations both parallel and across the basin. The basin‐fill exhibits an overall fining‐upward cycle, from conglomerate and breccia at the base to alternating sandstone‐mudstone in the depocentre, which interfingers with the fault‐scarp facies of the detachment. Sediment dispersal was transverse‐dominated and occurred through coalescing alluvial fans from the immediate hanging wall and/or footwall of the detachment. Different stratigraphic sections reveal important lateral facies variations that correlate with major corrugations of the detachment fault. The latter represent extension‐parallel folds that formed largely in response to the ca. N‐S constrictional strain regime of the transtensional plate boundary. The upward vertical deflection associated with antiformal folding dampened subsidence in the northeastern Santa Rosa basin, and resulted in steep topographic gradients with a high influx of coarse conglomerate here. By contrast, the downward motion in the synform hinge resulted in increased subsidence, and led to a southwestward migration of the depocentre with time. Thus, the Santa Rosa basin represents a new type of transtensional rift basin in which oblique extension is partitioned between diffuse constriction and discrete normal faulting. 40Ar/39Ar geochronology of intercalated volcanic rocks suggests that transtensional deformation began during the Late Miocene, between 9.36 ± 0.14 Ma and 6.78 ± 0.12 Ma, and confirms previous results from low‐temperature thermochronology (Seiler et al., 2011). Two other volcanic units that appear to be part of a conformable syn‐rift sequence are, in fact, duplicates of pre‐rift volcanics and represent allochthonous, gravity‐driven slide blocks that originated from the hanging wall.  相似文献   

7.
The Sagaing Fault zone is the largest active fault in SE Asia, whose current displacement rate of around 1.8 cm year?1 is well‐established from GPS data. Yet determining the timing of initiation and total displacement on the fault zone has proven controversial. The timing problem can potentially be resolved through a newly identified syn‐kinematic sedimentary section directly related to displacement on the Sagaing Fault in the northern Minwun Ranges. The northern part of the western strand of the Sagaing Fault has a releasing splay geometry that sets up a syn‐kinematic oblique‐extensional basin in its hangingwall, here called the North Minwun Basin. A series of thick ridges probably composed of alluvial fan and fluvial sandstones dipping between 20 and 70° to the north, and younging northwards comprise the basin fill over a distance of 40 km. Total stratigraphic thickness (not vertical thickness) is estimated at 25 km. The basin in terms of depositional geometries, large displacements, and large stratigraphic thickness and appearance on satellite images has parallels with the extensional Hornelen basin, Norway and the strike‐slip Ridge Basin, California. Minimum likely displacement on the fault strand is 40 km, and may possibly be in excess of 100 km. The remote and inaccessible basin has yet to be properly dated, likely ages range between Eocene and Miocene. When dated the basin will provide an important constraint on the timing of deformation. The potential for this basin to constrain the timing and displacement along the northern part of the Sagaing Fault has not been previously recognised.  相似文献   

8.
The stratigraphic, subsidence and structural history of Orphan Basin, offshore the island of Newfoundland, Canada, is described from well data and tied to a regional seismic grid. This large (400 by 400 km) rifted basin is part of the non‐volcanic rifted margin in the northwest Atlantic Ocean, which had a long and complex rift history spanning Middle Jurassic to Aptian time. The basin is underlain by variably thinned continental crust, locally <10‐km thick. Our work highlights the complex structure, with major upper crustal faults terminating in the mid‐crust, while lower crustal reflectivity suggests ductile flow, perhaps accommodating depth‐dependent extension. We describe three major stratigraphic horizons connected to breakup and the early post‐rift. An Aptian–Albian unconformity appears to mark the end of crustal rifting in the basin, and a second, more subdued Santonian unconformity was also noted atop basement highs and along the proximal margins of the basin. Only minor thermal subsidence occurred between development of these two horizons. The main phase of post‐rift subsidence was delayed until post‐Santonian time, with rapid subsidence culminating in the development of a major flooding surface in base Tertiary time. Conventional models of rifting events predict significant basin thermal subsidence immediately following continental lithospheric breakup. In the Orphan Basin, however, this subsidence was delayed for about 25–30 Myr and requires more thinning of the mantle lithosphere than the crust. Models of the subsidence history suggest that extreme thinning of the lithospheric mantle continued well into the post‐rift period. This is consistent with edge‐driven, small‐scale convective flow in the mantle, which may thin the lithosphere from below. A hot spot may also have been present below the region in Aptian–Albian time.  相似文献   

9.
Extensional faults and folds exert a fundamental control on the location, thickness and partitioning of sedimentary deposits on rift basins. The connection between the mode of extensional fault reactivation, resulting fault shape and extensional fold growth is well‐established. The impact of folding on accommodation evolution and growth package architecture, however, has received little attention; particularly the role‐played by fault‐perpendicular (transverse) folding. We study a multiphase rift basin with km‐scale fault displacements using a large high‐quality 3D seismic data set from the Fingerdjupet Subbasin in the southwestern Barents Sea. We link growth package architecture to timing and mode of fault reactivation. Dip linkage of deep and shallow fault segments resulted in ramp‐flat‐ramp fault geometry, above which fault‐parallel fault‐bend folds developed. The folds limited the accommodation near their causal faults, leading to deposition within a fault‐bend synclinal growth basin further into the hangingwall. Continued fold growth led to truncation of strata near the crest of the fault‐bend anticline before shortcut faulting bypassed the ramp‐flat‐ramp structure and ended folding. Accommodation along the fault‐parallel axis is controlled by the transverse folds, the location and size of which depends on the degree of linkage in the fault network and the accumulated displacement on causal faults. We construct transverse fold trajectories by tracing transverse fold hinges through space and time to highlight the positions of maximum and minimum accommodation and potential sediment entry points to hangingwall growth basins. The length and shape of the constructed trajectories relate to the displacement on their parent faults, duration of fault activity, timing of transverse basin infill, fault linkage and strain localization. We emphasize that the considerable wavelength, amplitudes and potential periclinal geometry of extensional folds make them viable targets for CO2 storage or hydrocarbon exploration in rift basins.  相似文献   

10.
The seismically and volcanically active Kivu Rift, in the western branch of the East African Rift System, is a type locale for studies of high‐elevation, humid‐climate rift basins, as well as magmatic basin development. Interpretations of offshore multi‐channel seismic (MCS) reflection data, terrestrial radar topography, lake bathymetry and seismicity data recorded on a temporary array provide new insights into the structure, stratigraphy and evolution of the Kivu rift. The Kivu rift is an asymmetric graben controlled on its west side by a ca. 110 km‐long, N‐S striking border fault. The southern basins of the lake and the upper Rusizi river basin are an accommodation zone effectively linking 1470 m‐high Lake Kivu to 770 m‐high Lake Tanganyika. MCS data in the eastern Kivu lake basin reveal a west‐dipping half graben with at least 1.5 km of sedimentary section; most of the ca. 2 km of extension in this sub‐basin is accommodated by the east‐dipping Iwawa normal fault, which bounds an intrabasinal horst. Lake Kivu experienced at least three periods of near desiccation. The two most recent of these approximately correlate to the African Megadrought and Last Glacial Maximum. There was a rapid lake level transgression of at least 400 m in the early Holocene. The line load of the Virunga volcanic chain enhances the fault‐controlled basin subsidence; simple elastic plate models suggest that the line load of the Virunga volcanic chain depresses the basin by more than 1 km, reduces flank uplift locally and broadens the depocentre. Not only do the voluminous magmatism and degassing to the lake pose a hazard to the riparian population, but our studies demonstrate that magmatism has important implications for short‐term processes such as lake levels, inflow and outlets, as well as long term modification of classic half‐graben basin morphology.  相似文献   

11.
《Basin Research》2018,30(3):448-479
The onshore central Corinth rift contains a syn‐rift succession >3 km thick deposited in 5–15 km‐wide tilt blocks, all now inactive, uplifted and deeply incised. This part of the rift records upward deepening from fluviatile to lake‐margin conditions and finally to sub‐lacustrine turbidite channel and lobe complexes, and deep‐water lacustrine conditions (Lake Corinth) were established over most of the rift by 3.6 Ma. This succession represents the first of two phases of rift development – Rift 1 from 5.0–3.6 to 2.2–1.8 Ma and Rift 2 from 2.2–1.8 Ma to present. Rift 1 developed as a 30 km‐wide zone of distributed normal faulting. The lake was fed by four major N‐ to NE‐flowing antecedent drainages along the southern rift flank. These sourced an axial fluvial system, Gilbert fan deltas and deep lacustrine turbidite channel and lobe complexes. The onset of Rift 2 and abandonment of Rift 1 involved a 30 km northward shift in the locus of rifting. In the west, giant Gilbert deltas built into a deepening lake depocentre in the hanging wall of the newly developing southern border fault system. Footwall and regional uplift progressively destroyed Lake Corinth in the central and eastern parts of the rift, producing a staircase of deltaic and, following drainage reversal, shallow marine terraces descending from >1000 m to present‐day sea level. The growth, linkage and death of normal faults during the two phases of rifting are interpreted to reflect self‐organization and strain localization along co‐linear border faults. In the west, interaction with the Patras rift occurred along the major Patras dextral strike‐slip fault. This led to enhanced migration of fault activity, uplift and incision of some early Rift 2 fan deltas, and opening of the Rion Straits at ca. 400–600 ka. The landscape and stratigraphic evolution of the rift was strongly influenced by regional palaeotopographic variations and local antecedent drainage, both inherited from the Hellenide fold and thrust belt.  相似文献   

12.
The Southern Tail‐End Graben, Danish Central Graben, is characterized by a lateral variation in the thickness and mobility of pre‐rift Zechstein Supergroup evaporites, allowing investigation of how supra‐basement evaporite variability influences rift structural style and tectono‐stratigraphy. The study area is divided into two structural domains based on interpretations of the depositional thickness and mobility of the Zechstein Supergroup. Within each domain, we examine the overall basin morphology and the structural styles in the pre‐Zechstein and supra‐Zechstein (cover) units. Furthermore, integration of two‐way travel‐time (TWT)‐structure and ‐thickness maps allows fault activity and evaporite migration maps to be generated for pre‐ and syn‐rift stratal units within the two domains, permitting constraints to be placed on: (i) the timing of activity on pre‐Zechstein and cover faults and (ii) the onset, duration and migration direction of mobile evaporites. The northern domain is interpreted to be free from evaporite‐influence, and has developed in a manner typical of brittle‐only, basement‐involved rifts. Syn‐rift basins display classical half‐graben geometries bounded by thick‐skinned faults. In contrast, the southern domain is interpreted to be evaporite‐influenced, and cover structure reflects a southward increase in the thickness and mobility of the Zechstein Supergroup evaporites. Fault‐related and evaporite‐related folding is prominent in the southern domain, together with variable degrees of decoupling of sub‐Zechstein and cover fault and fold systems. The addition of mobile evaporites to the rift results in: (i) complex and spatially variable modes of tectono‐stratigraphic evolution; (ii) syn‐rift stratal geometries which are condensed above evaporite swells and over‐thickened in areas of withdrawal; (iii) compartmentalized syn‐rift depocentres; and (iv) masking of rift‐related megasequence boundaries. Through demonstrating these deviations from the characteristics of rifts free from evaporite influence, we highlight the first order control evaporites may exert upon rift structural style and the distribution and thicknesses of syn‐rift units.  相似文献   

13.
Tectonic inversion models predict that stratigraphic thickening and local facies patterns adjacent to reactivated fault systems should record at least two phases of basin development: (1) initial extension‐related subsidence and (2) subsequent shortening‐induced uplift. In the central Peloncillo Mountains of southwestern New Mexico, thickness trends, distribution, and provenance of two major stratigraphic intervals on opposite sides of a northwest‐striking reverse fault preserve a record of Early Cretaceous normal displacement and latest Cretaceous–Paleogene reverse displacement along the fault. The Aptian–Albian Bisbee Group thickens by a factor of three from the footwall to the hanging‐wall block, and the Late Cretaceous?–Eocene Bobcat Hill Formation is preserved only in the footwall block. An initial episode of normal faulting resulted in thickening of upper Aptian–middle Albian, mixed siliciclastic and carbonate deposits and an up section change from coarse‐grained deltas to shallow‐marine depositional conditions. A second episode of normal faulting caused abrupt thickening of upper Albian, quartzose coastal‐plain deposits across the fault. These faulting episodes record two events of extension that affected the northern rift shoulder of the Bisbee basin. The third faulting episode was oblique‐slip, reverse reactivation of the fault and other related, former normal faults. Alluvial and pyroclastic deposits of the Bobcat Hill Formation record inversion of the Bisbee basin and development of an intermontane basin directly adjacent to the former rift basin. Inversion was coeval with latest Cretaceous–Paleogene shortening and magmatism. This offset history offers significant insight into extensional basin tectonics in the Early Cretaceous and permits rejection of models of long‐term Mesozoic shortening and orogen migration during the Cretaceous. This paper also illustrates how episodes of fault reactivation modify, in very short distances (<10 km), regional patterns of subsidence, the distribution of sediment‐source areas, and sedimentary depositional systems.  相似文献   

14.
We describe the tectono‐sedimentary evolution of a Middle Jurassic, rift‐related supra‐detachment basin of the ancient Alpine Tethys margin exposed in the Central Alps (SE Switzerland). Based on pre‐Alpine restoration, we demonstrate that the rift basin developed over a detachment system that is traced over more than 40 km from thinned continental crust to exhumed mantle. The detachment faults are overlain by extensional allochthons consisting of upper crustal rocks and pre‐rift sediments up to several kilometres long and several hundreds of metres thick, compartmentalizing the distal margin into sub‐basins. We mapped and restored one of these sub‐basins, the Samedan Basin. It consists of a V‐shape geometry in map view, which is confined by extensional allochthons and floored by a detachment fault. It can be restored over a minimum distance of 11 km along and about 4 km perpendicular to the basin axis. Its sedimentary infill can be subdivided into basal (initial), intermediate (widening) and top (post‐tectonic) facies tracts. These tracts document (1) formation of the basin initially bounded by high‐angle faults and developing into low‐angle detachment faults, (2) widening of the basin and (3) migration of deformation further outboard. The basal facies tract is made of locally derived, poorly sorted gravity flow deposits that show a progressive change from hangingwall to footwall‐derived lithologies. Upsection the sediments develop into turbidity current deposits that show retrogradation (intermediate facies tract) and starvation of the sedimentary system (post‐tectonic facies tract). On the scale of the distal margin, the syn‐tectonic record documents a thinning‐ and fining‐upward sequence related to the back stepping of the tectonically derived sediment source, progressive starvation of the sedimentary system and migration of deformation resulting in exhumation and progressive delamination of the thinned crust during final rifting. This study provides valuable insights into the tectono‐sedimentary evolution and stratigraphic architecture of a supra‐detachment basin formed over hyper‐extended crust.  相似文献   

15.
The Porcupine Basin is a Mesozoic failed rift located in the North Atlantic margin, SW of Ireland, in which a postrift phase of extensional faulting and reactivation of synrift faults occurred during the Mid–Late Eocene. Fault zones are known to act as either conduits or barriers for fluid flow and to contribute to overpressure. Yet, little is known about the distribution of fluids and their relation to the tectono‐stratigraphic architecture of the Porcupine Basin. One way to tackle this aspect is by assessing seismic (Vp) and petrophysical (e.g., porosity) properties of the basin stratigraphy. Here, we use for the first time in the Porcupine Basin 10‐km‐long‐streamer data to perform traveltime tomography of first arrivals and retrieve the 2D Vp structure of the postrift sequence along a ~130‐km‐long EW profile across the northern Porcupine Basin. A new Vp–density relationship is derived from the exploration wells tied to the seismic line to estimate density and bulk porosity of the Cenozoic postrift sequence from the tomographic result. The Vp model covers the shallowest 4 km of the basin and reveals a steeper vertical velocity gradient in the centre of the basin than in the flanks. This variation together with a relatively thick Neogene and Quaternary sediment accumulation in the centre of the basin suggests higher overburden pressure and compaction compared to the margins, implying fluid flow towards the edges of the basin driven by differential compaction. The Vp model also reveals two prominent subvertical low‐velocity bodies on the western margin of the basin. The tomographic model in combination with the time‐migrated seismic section shows that whereas the first anomaly spatially coincides with the western basin‐bounding fault, the second body occurs within the hangingwall of the fault, where no major faulting is observed. Porosity estimates suggest that this latter anomaly indicates pore overpressure of sandier Early–Mid Eocene units. Lithological well control together with fault displacement analysis suggests that the western basin‐bounding fault can act as a hydraulic barrier for fluids migrating from the centre of the basin towards its flanks, favouring fluid compartmentalization and overpressure of sandier units of its hangingwall.  相似文献   

16.
《Basin Research》2018,30(3):522-543
We present a source‐to‐sink analysis to explain sediment supply variations and depositional patterns over the Holocene within an active rift setting. We integrate a range of modelling approaches and data types with field observations from the Sperchios rift basin, Central Greece that allow us to analyse and quantify (1) the size and characteristics of sediment source areas, (2) the dynamics of the sediment routing system from upstream fluvial processes to downstream deposition at the coastline, and (3) the depositional architecture and volumes of the Holocene basin fill. We demonstrate that the Sperchios rift comprises a ‘closed’ system over the Holocene and that erosional and depositional volumes are thus balanced. Furthermore, we evaluate key controls in the development of this source‐to‐sink system, including the role of pre‐existing topography, bedrock erodibility and lateral variations in the rate of tectonic uplift/subsidence. We show that tectonic subsidence alone can explain the observed grain size fining along the rift axis resulting in the downstream transition from a braided channel to an extensive meander belt (>15 km long) that feeds the fine‐grained Sperchios delta. Additionally, we quantify the ratios of sediment storage to bypass for the two main footwall‐sourced alluvial fan systems and relate the fan characteristics to the pattern and rates of fault slip. Finally, we show that ≥40% of the sediment that builds the Sperchios delta is supplied by ≤22% of the entire source area and that this can be primarily attributed to a longer‐term (~106 years) transient landscape response to fault segment linkage. Our multidisciplinary approach allows us to quantify the relative importance of multiple factors that control a complex source‐to‐sink system and thus improve our understanding of landscape evolution and stratigraphic development in active extensional tectonic settings.  相似文献   

17.
The evolution of depositional systems in multiphase rifts is influenced by the selective reactivation of faults between subsequent rift phases. The Middle Jurassic to Palaeocene tectonic history of the Lofoten margin, a segment of the North Atlantic rift system, is characterised by three distinct rift phases separated by long (>20 Myr) inter‐rift periods. The initial rift phase comprised a distinct fault initiation and linkage stage, whereas the later rift phases were characterised by selective reactivation of previously linked through‐going faults which resulted in immediate rift climax. Using 2‐D and 3‐D seismic reflection data in conjunction with shallow core data we present a 100 Myr record of shallow to deep marine depositional environments that includes deltaic clinoform packages, slope aprons and turbidite fans. The rapid re‐establishment of major faults during the later rift phases impacts on drainage systems and sediment supply. Firstly, the immediate localisation of strain and accumulation of displacement on few faults results in pronounced footwall uplift and possible fault block rotation along those faults, which makes it more likely for any antecedent fault‐transverse depositional systems to become reversed. Secondly, any antecedent axially‐sourced depositional systems that are inherited from the foregoing rift phase(s) are likely to be sustained after reactivation because such axial systems have already been directed around fault tips. Hence, the immediate localisation of strain through selective reactivation in the later rift phases restricts fault‐transverse sediment supply more than axial sediment supply, which is likely to be a key aspect of the tectono‐sedimentary evolution of multiphase rifts.  相似文献   

18.
Through the investigation of crustal heterogeneities, sedimentary basin architecture and seismic stratigraphy, we demonstrate how a crust‐scale anisotropy controls the initiation of rifting and the subsequent structural and sedimentological evolution of the Mesozoic Gamtoos Basin, southern South Africa. The results demonstrate that the >90‐km‐long Gamtoos Fault established its length very early in its syn‐rift phase (within ～5 Ma of rift initiation) before accruing over 6 s (two‐way‐travel time (TWT)), or >12 km, of displacement without any significant subsequent increase in length. In addition, there is no evidence at the resolution of the data of fault segmentation, isolated depocentres nor of intra‐basin faults progressively coalescing during the syn‐rift interval. The early establishment of length resulted in a rapid transition from a terrestrial depositional environment to anoxic, deep marine conditions. The Gamtoos Fault has a 90° bend in the fault trace that we propose is inherited from the underlying structure. Immediately adjacent to the bend the basin‐fill is significantly deformed and a high‐amplitude (>1.7s TWT) monoclinal fold is observed. Previous workers proposed that the fold was a consequence of a complex interplay between compression and extension. Through a restoration of the basin‐fill deformation we produce a model that suggests that the fold is a consequence of the accommodation of extension by the unusual plan‐view trace of the fault. The evolution of the basin does not conform to current fault growth models and it is proposed that its unusual and complex development can be attributed to the underlying crustal‐scale anisotropy, a fact that is likely to be important in other areas in which crustal stretching is superimposed on heterogeneous continental crust.  相似文献   

19.
Structural evolution of African basins: stratigraphic synthesis   总被引：1，自引：0，他引：1  
The structural and stratigraphic character of African interior sedimentary basins is highly variable, indicating contrasting basin-forming mechanisms and subsequent subsidence histories. A stratigraphic database has been compiled for African interior depositional basins for the purpose of better understanding basin thermal and structural development. Data are recorded in the form of stratal age, lithology, thickness and elevation of top with respect to present sea level. The data are obtained from published structure contour maps, well sections, and outcrop geology and elevation. There are various degrees of data coverage of the basins, proportional to the amount of water and oil drilling activity. Consequently, there is excellent coverage of North African basins such as the Algerian basin and the Sirte basin, while there is little known about the subsurface of the Congo basin. The stratigraphic data are used to reconstruct the depositional history of the basins, while backstripping leads to the quantification of the thermo-tectonic component of basin subsidence. The nature of basement subsidence can provide constraints on lithospheric flexural rigidity. In addition, the depositional and thermo-tectonic history of each basin bears upon the mechanisms of basin formation and subsidence. Virtually all types of basins are represented in interior Africa, including thrust-loaded basins (Algerian), passive-margin rift basins (Algerian, Sirte), modern active rift basins (East African), ancient rift basins (Benue, Abu Gabra), basins caused by uplift of their margins (Congo, Chad, Illumeden) and even basins that may be related to thermal subsidence of hot-spot domes (Algerian, Sirte).  相似文献   

20.
The complex development of the northern Crotone Basin, a forearc basin of the Calabrian Arc (Southern Italy), has been documented by sedimentological, stratigraphic and structural analyses. This Mediterranean‐type fault bounded basin consists of small depocentres commonly characterized by a mix of facies that grades from continental to shallow marine. The lower Pliocene infill of the Crotone Basin consists of offshore marls (Cavalieri Marl) that grade upwards into a shallow‐marine to continental succession up to 850 m thick (Zinga Formation). The succession is subdivided into three main stratal units: Zinga 1, Zinga 2, Zinga 3 bounded by major unconformities. The Zinga 1 stratal unit grades from the Cavalieri Marl to deltaic and shoreface deposits, the latter organized into several stacked progradational wedges that show spectacular thickness changes and progressive unconformities related to salt‐cored NE‐trending growth folds and listric normal faults. The Zinga 2 stratal unit records a progressive and moderate deepening of the area, marked by fluvial sedimentation at the base, followed by lagoonal deposits and by a stacking of mixed bioclastic and siliciclastic shoreface units, organized into metre‐scale high‐frequency cycles. Deposition was controlled by NE‐trending synsedimentary normal faults that dissected the basin into a series of half‐grabens. Hangingwall stratigraphic expansion was compensated by footwall condensed sedimentation. The extensional tectonic regime continued during sedimentation of the Zinga 3 stratal unit. Deposition confined within structural lows during a generalized transgressive phase led to local enhancement of tidal flows and development of sand‐wave trains. The tectonic setting testifies the generalized structural domain of a forearc region. The angular unconformity at the top of the Zinga 3 stratal unit is regional, and marks the activation of a large‐scale tectonic phase linked to strike‐slip movements.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号