共查询到20条相似文献，搜索用时 9 毫秒
1.
Studying complex pore structures is the key to understanding the mechanism of shale gas accumulation. FIB-SEM (focused ion beam-scanning electron microscope) is the mainstream and effective instrument for imaging nanopores in gas shales. Based on this technology, 2D and 3D characteristics of shale samples from Lower Silurian Longmaxi formation in southern Sichuan Basin were investigated. 2D experimental results show that the pores in shale are nanometer-sized, and the structure of those nanopores can be classified into three types: organic pores, inorganic pores and micro fractures. Among the three types, organic pores are dominantly developed in the OM (organic matter) with three patterns such as continuous distributed OM, OM between clay minerals and OM between pyrite particles, and the size of organic pores range from 5 nm to 200 nm.Inveresly, inorganic pores and micro fractures are less developed in the Longmaxi shales. 3D digital rocks were reconstructed and segmented by 600 continuous images by FIB cutting and SEM imaging simultaneously. The pore size distribution and porosity can be calculated by this 3D digital core, showing that its average value is 32 nm and porosity is 3.62%.The 3D digital porosity is higher than its helium porosity, which can be regarded as one important parameter for evaluation of shale gas reserves. The 2D and 3D characterized results suggest that the nanometer-sized pores in organic matter take up the fundamental storage space for the Longmaxi shale. These characteristics have contributed to the preservation of shale gas in this complex tectonic area. 相似文献
2.
Mineral types (detrital and authigenic) and organic-matter components of the Ordovician-Silurian Wufeng and Longmaxi Shale (siliceous, silty, argillaceous, and calcareous/dolomitic shales) in the Sichuan Basin, China are used as a case study to understand the control of grain assemblages and organic matter on pores systems, diagenetic pathway, and reservoir quality in fine-grained sedimentary rocks. This study has been achieved using a combination of petrographic, geochemical, and mercury intrusion methods. The results reveal that siliceous shale comprises an abundant amount of diagenetic quartz (40–60% by volume), and authigenic microcrystalline quartz aggregates inhibit compaction and preserve internal primary pores as rigid framework for oil filling during oil window. Although silty shale contains a large number of detrital silt-size grains (30–50% by volume), which is beneficial to preserve interparticle pores, the volumetric contribution of interparticle pores (mainly macropores) is small. Argillaceous shale with abundant extrabasinal clay minerals (>50% by volume) undergoes mechanical and chemical compactions during burial, leading to a near-absence of primary interparticle pores, while pores preserved between clay platelets are dominant with more than 10 nm in pore size. Pore-filling calcite and dolomite precipitated during early diagenesis inhibit later compaction in calcareous/dolomitic shale, but the cementation significantly reduces the primary interparticle pores. Pore-throat size distributions of dolomitic shale show a similar trend with silty shale. Besides argillaceous shale, all of the other lithofacies are dominated by OM pores, which contribute more micropores and mesopores and is positively related to TOC and quartz contents. The relationship between pore-throat size and pore volume shows that most pore volumes are provided by pore throats with diameters <50 nm, with a proportion in the order of siliceous (80.3%) > calcareous/dolomitic (78.4%) > silty (74.9%) > argillaceous (61.3%) shales. In addition, development degree and pore size of OM pores in different diagenetic pathway with the same OM type and maturity show an obvious difference. Therefore, we suggest that the development of OM pores should take OM occurrence into account, which is related to physical interaction between OM and inorganic minerals during burial diagenesis. Migrated OM in siliceous shale with its large connected networks is beneficial for forming more and larger pores during gas window. The result of the present work implies that the study of mineral types (detrital and authigenic) and organic matter-pores are better understanding the reservoir quality in fine-grained sedimentary rocks. 相似文献
3.
The nano-scale pore systems of organic-rich shale reservoirs were investigated from Upper Ordovician Wufeng and Lower Silurian Longmaxi Formations in southeast Sichuan Basin. These two formations are the most important target plays of shale gas development in China. The purpose of this article is to assess the geometry and connectivity of multi-scale pore systems, and to reveal the nature and complexity of pore structure for these over-mature gas shales. To achieve these objective, total organic carbon, mineralogy, image analyses by focused ion beam-SEM, low pressure nitrogen adsorption, mercury injection capillary pressure (MICP) and spontaneous fluid [deionized (DI) water and n-decane] imbibition were performed.Most of the visible pores from SEM work in Wufeng and Longmaxi shales are within nm- and μm-size regimes and belong to organic matter (OM) pores. The shapes of OM pore in Longmaxi samples are elliptical, bubble-like, irregular or rounded. Wufeng pores are mainly irregular, linear and faveolated, even though two shales have small depth difference, as well as similar thermal maturity, kerogen type and TOC content. Nano-scale pores in Longmaxi are mainly associated with narrow platelike or slitlike pores with pore size of 3–50 nm; while inkbottle pores are dominant in Wufeng samples and over 88% of the pore volume is contributed by pores with diameter <20 nm. Overall, porosity, pore volume and surface area values from Wufeng samples are much higher than those in Longmaxi, which is mainly correlated with the different TOC contents and mineral compositions. MICP tests show that a total of 5 inflection points (indicative of different connected pore networks) are identified in all pressure regions for Longmaxi, while only 2 for Wufeng in high pressure region with the associated permeability at nano-darcy range. Imbibition curves of n-decane are divided into three stages: the initial stage (Stage Ⅰ), linear imbibition stage (Stage Ⅱ) and late imbibition stage (Stage Ⅲ), and the slopes of linear imbibition stage are around 0.5, suggesting well-connected pore spaces for n-decane. In contrast, imbibition curves for DI water are divided in two stages with linear slopes of between 0.25 and 0.5, indicating moderately-connected pore networks for the movement of DI water. This is consistent with the mixed-wet nature of these shales, with observed weak wettability for hydrophilic, while complete wetting for hydrophobic fluids. 相似文献
4.
Shales from the Lower Silurian Longmaxi Formation in the Sichuan Basin are among the most important shale gas reservoirs in China, and have been investigated because of their great shale gas potential. To understand the pore structure and fractal characteristics of the shales, a series of experiments was conducted on core samples from the Lower Silurian Longmaxi Formation in the Sichuan Basin of China, including X-ray diffraction (XRD), total organic carbon (TOC) content and vitrinite reflectance (Ro) analysis, field emission-environmental scanning electron microscope (FE-ESEM) observation, and low-pressure N2 adsorption-desorption experiments. Frenkel-Halsey-Hill (FHH) method was applied to calculate fractal dimensions. In addition, the pore genesis, the relationships between composition and thermal maturity, the pore structure parameters, and the fractal dimensions are discussed. FE-ESEM observation results show that the Longmaxi Formation shales are dominated by organic-matter (OM) pores along with interparticle (interP) pores, intraparticle (intraP) pores and fracture pores. This study identified the fractal dimensions at relative pressures of 0–0.45 and 0.45–1 as D1 and D2 respectively. D1 ranged from 2.60 to 2.71 and D2 ranged from 2.71 to 2.82. D1 was typically smaller than D2, indicating that the smaller pores in shales were more homogeneous than the larger ones. The formation of these OM pores is owing to kerogen deformation during the thermal maturation, which results in a large number of nanopores. The pore structure of the Longmaxi Formation shales is primarily controlled by TOC content and thermal maturity. TOC content is a controlling factor on the fractal dimensions as it exhibited positive correlations with D1 and D2. Fractal dimensions are useful for the characterization of the pore structures complexity of the Longmaxi Formation shales because D1 and D2 correlate well with pore structure parameters as they both increase with the increase of surface area and the decrease of average pore diameter. 相似文献
5.
Shale samples collected from seven wells in the southeastern Ordos Basin were tested to investigate quantitatively the pore structure and fractal characteristics of the Lower Permian Shanxi Shale, which was deposited in a marine-continental transitional (hereinafter referred to as the transitional) environment. Low-pressure nitrogen adsorption data show that the Shanxi Shale exhibits considerably much lower surface area (SA) and pore volume (PV) in the range of 0.6–1.3 m2/g and 0.25–0.9 ml/100 g, respectively. Type III kerogen abundant in the transitional Shanxi Shale were observed to be poorly developed in the organic pores in spite of being highly mature, which resulted in a small contribution of organic matter (OM) to the SA and PV. Instead, I/S (illite-smectite mixed clay) together with illite jointly contributed mostly to the SA and PV as a result of the large amount of inter-layer pores associated with them, which were evident in broad-ion-beam (BIB) imaging and statistical analysis. Additionally, the Shanxi Shale has fractal geometries of both pore surface and pore structure, with the pore surface fractal dimension (D1) ranging from 2.16 to 2.42 and the pore structure fractal dimension (D2) ranging from 2.49 to 2.68, respectively. The D1 values denote a pore surface irregularity increase with an increase in I/S and illite content attributed to their more irregular pore surface compared with other mineralogical compositions and OM. The fractal dimension D2 characterizing the pore structure complexity is closely related to the pore arrangement and connectivity, and I/S and illite decrease the D2 when their contents increase due to the incremental ordering degree and connectivity of I/S- or illite-hosted pores. Meanwhile, other shale constituents (including kaolinite, chlorite, and OM) that possess few pores can significantly increase the pore structure complexity by way of pore-blocking. 相似文献
6.
Shale reservoirs of the Middle and Upper Devonian Horn River Group provide an opportunity to study the influence of rock composition on permeability and pore throat size distribution in high maturity formations. Sedimentological, geochemical and petrophysical analyses reveal relationships between rock composition, pore throat size and matrix permeability.In our sample set, measured matrix permeability ranges between 1.69 and 42.81 nanodarcies and increases with increasing porosity. Total organic carbon (TOC) content positively correlates to permeability and exerts a stronger control on permeability than inorganic composition. A positive correlation between silica content and permeability, and abundant interparticle pores between quartz crystals, suggests that quartz may be another factor enhancing the permeability. Pore throat size distributions are strongly related to TOC content. In organic rich samples, the dominant pore throat size is less than 10 nm, whereas in organic lean samples, pore throat size distribution is dominantly greater than 20 nm. SEM images suggest that in organic rich samples, organic matter pores are the dominant pore type, whereas in quartz rich samples, the dominant type is interparticle pores between quartz grains. In clay rich and carbonate rich samples, the dominant pore type is intraparticle pores, which are fewer and smaller in size.High permeability shales are associated with specific depositional facies. Massive and pyritic mudstones, rich in TOC and quartz, have comparatively high permeability. Laminated mudstone, bioturbated mudstone and carbonate facies, which are relatively enriched in clay or carbonate, have fairly low permeability. 相似文献
7.
Unconventional tight to shale reservoirs vary from tight sandstone/siltstone to organic-rich mudstone/shale, commonly with mixed lithologies. In such reservoir systems, matrix pores and organic pores with different origins and distinct physical and chemical properties co-exist for hydrocarbon storage. Traditional resource assessment methods, designed for conventional reservoirs, cannot handle the two pore systems properly. This study proposes a dual-porosity model to respond to the need for a new method in assessing hydrocarbon resource potential in such reservoir systems. The dual-porosity model treats the two types of pores separately and derives the resource estimates from different sources of data, thus better characterizing unconventional reservoirs with complicated pore systems. The new method also has the flexibility of assessing resource potential for the entire spectrum of mixed lithologies ranging from a complete tight to a pure source rock (organic–rich shale/mudstone) reservoir. The proposed method is illustrated through the assessment of the in-place petroleum resource potential in the Upper Ordovician Utica Shale of southern Quebec, Canada. The results of the application suggest that the proposed approach effectively handles the two pore systems in tight-shale reservoirs effectively and provides a useful tool for estimating resource potential in unconventional plays. 相似文献
8.
The paper takes the Upper Carboniferous Taiyuan shale in eastern uplift of Liaohe depression as an example to qualitatively and quantitatively characterize the transitional (coal-associated coastal swamp) shale reservoir. Focused Ion Beam Scanning Electron Microscope (FIB-SEM), nano-CT, helium pycnometry, high-pressure mercury intrusion and low-pressure gas (N2 & CO2) adsorption for eight shale samples were taken to investigate the pore structures. Four types of pores, i.e., organic matter (OM) pores, interparticle (InterP) pores, intraparticle (IntraP) pores and micro-fractures are identified in the shale reservoir. Among them, intraP pores and micro-fractures are the major pore types. Slit-shaped pores are the major shape in the pore system, and the connectivity of the pore-throat system is interpreted to be moderate, which is subordinate to marine shale. The porosity from three dimension (3D) reconstruction of SEM images is lower than the porosity of helium pycnometry, while the porosity trend of the above two methods is the same. Combination of mercury intrusion and gas absorption reveals that nanometer-scale pores provide the main storage space, accounting for 87.16% of the pore volume and 99.85% of the surface area. Micropores contribute 34.74% of the total pore volume and 74.92% of the total pore surface area; and mesopores account for 48.27% of the total pore volume and 24.93% of the total pore surface area; and macropores contribute 16.99% of the total pore volume and 0.15% of the total pore surface area. Pores with a diameter of less than 10 nm contribute the most to the pore volume and the surface area, accounting for 70.29% and 97.70%, respectively. Based on single factor analysis, clay minerals are positively related to the volume and surface area of micropores, mesopores and macropores, which finally control the free gas in pores and adsorbed gas content on surface area. Unlike marine shale, TOC contributes little to the development of micropores. Brittle minerals inhibit pore development of Taiyuan shale, which proves the influence of clay minerals in the pore system. 相似文献
9.
Previous studies have determined many types of pores in shale, such as organic pores, inorganic pores and microfractures. In this study, pores are classified as intergranular, intraparticle, and organic pores based on the location of their occurrence. The heterogeneities of the three pore types and their effects on the occurrence of shale gas, which is of utmost practical importance for shale gas exploration and development, are discussed. In this study, the three types of pores are quantitatively characterized using fractal and multifractal methods. The mean fractal dimension and mean width of the multifractal spectrum of these pores are found to be different, i.e., 1.5985 and 1.665 for intraparticle pores, 1.5869 and 1.475 for intergranular pores, and 1.6 and 1.3725 for organic pores. Intraparticle pores have the highest heterogeneity, intergranular pores have intermediate heterogeneity, and organic pores have the lowest heterogeneity. SEM images show that organic pores have good connectivity, homogeneous distribution, and small range of aperture change but have the lowest heterogeneity even where pores are abundant; thus, they provide the largest shale gas occurrence space. In contrast, intergranular pores are less abundant, have lower connectivity, and have higher heterogeneity than organic pores, thereby providing a relatively smaller shale gas occurrence space. Finally, intraparticle pores are the least abundant and possess the poorest connectivity, largest range of aperture change, and highest heterogeneity of the three pore types, thereby providing the smallest shale gas occurrence space. We conclude that organic pores are crucial to the occurrence of shale gas and can provide a new index for the evaluation of shale gas exploration and development. 相似文献
10.
Organic shales deposited in a continental environment are well developed in the Ordos Basin, NW China, which is rich in hydrocarbons. However, previous research concerning shales has predominantly focused on marine shales and barely on continental shales. In this study, geochemical and mineralogical analyses, high-pressure mercury intrusion and low-pressure adsorption were performed on 18 continental shale samples obtained from a currently active shale gas play, the Chang 7 member of Yanchang Formation in the Ordos Basin. A comparison of all these techniques is provided for characterizing the complex pore structure of continental shales.Geochemical analysis reveals total organic carbon (TOC) values ranging from 0.47% to 11.44%, indicating that there is abundant organic matter (OM) in the study area. Kerogen analysis shows vitrinite reflectance (Ro) of 0.68%–1.02%, indicating that kerogen is at a mature oil generation stage. X-ray diffraction mineralogy (XRD) analysis indicates that the dominant mineral constituents of shale samples are clay minerals (which mainly consist of illite, chlorite, kaolinite, and negligible amounts of montmorillonite), quartz and feldspar, followed by low carbonate content. All-scale pore size analysis indicates that the pore size distribution (PSD) of shale pores is mainly from 0.3 to 60 nm. Note that accuracy of all-scale PSD analysis decreases for pores less than 0.3 nm and more than 10 μm. Experimental analysis indicates that mesopores (2–50 nm) are dominant in continental shales, followed by micropores (<2 nm) and macropores (50 nm–10 μm). Mesopores have the largest contribution to pore volume (PV) and specific surface area (SSA). In addition, plate- and sheet-shaped pores are dominant with poor connectivity, followed by hybrid pores. Results of research on factors controlling pore structure development show that it is principally controlled by clay mineral contents and Ro, and this is different from marine systems. This study has important significance in gaining a comprehensive understanding of continental shale pore structure and the shale gas storage–seepage mechanism. 相似文献
11.
The purpose of this paper is to provide both quantitative and qualitative visual analyses of the nanometer-scale pore systems of immature and early shales, as well as to discuss the biogenic shale gas accumulation potential of the Upper Cretaceous section of the Songliao Basin. To achieve these goals, mineralogical compositions were determined using transmitted and reflected light petrography, X-ray diffractometry and scanning electron microscopy (SEM), while the nanostructure morphology and pore size distributions (PSDs) were quantified using field emission scanning electron microscopy (FE-SEM) and low-pressure nitrogen gas adsorption (LP-N2GA). The results of these analyses indicate that nanometer-scale pores are well developed in the immature and low-maturity shale, and that these shales contain many types of reservoir pores. The mudstone layer of the Qingshankou Formation (K2qn) contains a high permeability characteristic and good rock fracturing conditions, while it is also thick (>9 m in thickness) and rich in fine organic matter. Overall, analysis of the entire formation using source rock and reservoir evaluations indicate that the first member of the Qingshankou Formation (K2qn1) has a greater shale gas accumulation potential than the second and third members of the Qingshankou Formation (K2qn2-3). 相似文献
12.
As shale oil occurs primarily in micro–nano pores and fractures, research about the effect of pore structure on shale oil accumulation has great significance for shale oil exploration and development. The effect of pore structure on shale oil accumulation in the lower third member of the Shahejie formation (Es3l), Zhanhua Sag, eastern China was investigated using gas adsorption, soxhlet extraction, nuclear magnetic resonance (NMR) analysis, and field emission scanning electron microscope (FE-SEM) observation. The results indicated that the samples contained a larger amount of ink-bottle-shaped and slit-shaped pores after extraction than before extraction. The pore volume and specific surface area of the samples were approximately 2.5 times larger after extraction than before extraction. Residual hydrocarbon occurred primarily in the free-state form in pores with diameters of 10–1000 nm, which can provide sufficient pore volume for free hydrocarbon accumulation. Therefore, pores with diameters of 10–1000 nm were regarded as “oil-enriched pores”, which are effective pores for shale oil exploration, whereas pores with diameters smaller than 10 nm were regarded as “oil-ineffective pores”. Samples with only well-developed small pores with diameters smaller than 1000 nm showed high oil saturation, whereas samples with both small pores and also relatively large pores and micro-fractures presented low oil saturation. As the minimum pore size allowing fluid expulsion is 1000 nm, pores with diameters greater than 1000 nm were considered as “oil-percolated pores”. Large pores and micro-fractures are generally interconnected and may even form a complex fracture mesh, which greatly improves the permeability of shale reservoirs and is beneficial to fluid discharge. 相似文献
13.
X-ray computed tomography and serial block face scanning electron microscopy imaging techniques were used to produce 3D images with a resolution spanning three orders of magnitude from ∼7.7 μm to 7 nm for one typical Bowland Shale sample from Northern England, identified as the largest potential shale gas reservoir in the UK. These images were used to quantitatively assess the size, geometry and connectivity of pores and organic matter. The data revealed four types of porosity: intra-organic pores, organic interface pores, intra- and inter-mineral pores. Pore sizes are bimodal, with peaks at 0.2 μm and 0.04 μm corresponding to pores located at organic–mineral interfaces and within organic matter, respectively. These pore-size distributions were validated by nitrogen adsorption data. The multi-scale imaging of the four pore types shows that there is no connected visible porosity at these scales with equivalent diameter of 20 nm or larger in this sample. However, organic matter and clay minerals are connected and so the meso porosity (<20 nm) within these phases provides possible diffusion transport pathways for gas. This work confirms multi-scale 3D imaging as a powerful quantification method for shale reservoir characterisation allowing the representative volumes of pores, organic and mineral phases to be defined to model shale systems. The absence of connected porosity at scales greater than 20 nm indicates the likely importance of the organic matter network, and associated smaller-scale pores, in controlling hydrocarbon transport. . The application of these techniques to shale gas plays more widely should lead to a greater understanding of properties in the low permeability systems. 相似文献
14.
Much attention have been recently paid to the upper Ordovician Wufeng shale (O3w) and lower Silurian Longmaxi shale (S1l) in the Jiaoshiba area of Sichuan Basin, which is now the largest producing shale gas field in China. Field emission scanning electron microscopy (FE-SEM), low pressure gas (N2 and CO2) adsorption, helium pycnometry, X-ray diffraction and geochemical analyses were performed to investigate the pore structure and fractal dimension of the pores in O3w-S1l shale formation in the Jiaoshiba area. FE-SEM images show that organic matter (OM) pores are dominant in the organic-rich samples and these pores are often irregular, bubble-like, elliptical and faveolate in shape, while in organic-poor samples, limited and isolated interparticle (interP), intraparticle (intraP) and OM pores are observed. Reversed S-shaped isotherms obtained from nitrogen adsorption are type Ⅱ, and hysteresis loops indicate that the shape of micropore in the samples is slit-or plate-like. BET surface areas and total pore volume vary from 12.2 to 27.1 m2/g and from 1.8 × 10−2 to 2.9 × 10−2 cm3/g, with an average of 19.5 m2/g and 2.3 × 10−2 cm3/g, respectively. Adsorption volume from both N2 and CO2 adsorption increases with respect to TOC contents. Porosities obtained from helium porosimetry are comparable with these from gas (CO2 and N2) adsorption in O3w-S1l shale. However, porosity determined by quantitative FE-SEM analysis is much smaller, which is mainly related to limited resolution and the small areas of investigation.Based on the Frenkel-Halsey-Hill (FHH) model of low-pressure N2 adsorption, fractal dimensions of the pores varied from 2.737 to 2.823. Relationships between pore structure parameters and TOC content, mineral composition and fractal dimension reveal that the fractal dimension is mainly associated with micropores. Samples with higher TOC content, higher quartz content and lower clay content tend to contain more heterogeneous micropores, resulting in higher fractal dimensions and more complicated pore structure in shales. Therefore, fractal dimension is an effective parameter to reflect the complexity of pore structure and the degree of micropore development in O3w-S1l shale. 相似文献
15.
Variability in the Lower Bowland shale microstructure is investigated here, for the first time, from the centimetre to the micrometre scale using optical and scanning electron microscopy (OM, SEM), X-Ray Diffraction (XRD) and Total Organic Carbon content (TOC) measurements. A significant range of microtextures, organic-matter particles and fracture styles was observed in rocks of the Lower Bowland shale, together with the underlying Pendleside Limestone and Worston Shale formations encountered the Preese Hall-1 Borehole, Lancashire, UK. Four micro-texture types were identified: unlaminated quartz-rich mudstone; interlaminated quartz- and pyrite-rich mudstone; laminated quartz and pyrite-rich mudstone; and weakly-interlaminated calcite-rich mudstone. Organic matter particles are classified into four types depending on their size, shape and location: multi-micrometre particles with and without macropores: micrometre-size particles in cement and between clay minerals; multi-micrometre layers; and organic matter in large pores. Fractures are categorized into carbonate-sealed fractures; bitumen-bearing fractures; resin-filled fractures; and empty fractures. We propose that during thermal maturation, horizontal bitumen-fractures were formed by overpressuring, stress relaxation, compaction and erosional offloading, whereas vertical bitumen-bearing, resin-filled and empty fractures may have been influenced by weak vertical joints generated during the previous period of veining. For the majority of samples, the high TOC (>2 wt%), low clay content (<20 wt%), high proportion of quartz (>50 wt%) and the presence of a multi-scale fracture network support the increasing interest in the Bowland Shale as a potentially exploitable oil and gas source. The microtextural observations made in this study highlight preliminary evidence of fluid passage or circulation in the Bowland Shale sequence during burial. 相似文献
16.
Four Haynesville Shale and four Bossier Shale samples were investigated using a combination of Scanning Electron Microscopy (SEM) and Broad Ion Beam (BIB) polishing. This approach enables the microstructure and porosity to be studied down to the mesopore size (<50 nm) in representative areas at the scale of the BIB cross-sections. The samples vary in mineralogy, grain size and TOC and the maturity ranges from 2.42 to 2.58 VRr in the Haynesville Shale to 1.79–2.26 VRr in the Bossier Shale. This variety within the samples enabled us to study controls on the porosity distribution in these shales. Visible pores exist as intraparticle pores mainly in carbonate grains and pyrite framboids and as interparticle pores, mainly in the clay-rich matrix. Pores in organic matter show a characteristic porosity with respect to the type of organic matter, which mainly consists of mixtures of amorphous organic matter and minerals, organic laminae and discrete macerals. A clear positive trend of organic-matter porosity with maturity was found. Pore sizes are power law distributed in the range of 4.4 μm to at least 36 nm in equivalent diameter. The differences in power law exponents suggest that a more grain supported, coarse-grained matrix may prevent pores from mechanical compaction. Porosities measured in the BIB cross-sections were significantly lower in comparison to porosities obtained by Mercury Intrusion Porosimetry (MIP). This difference is mainly attributed to the different resolution achieved with BIB-SEM and MIP and type of pore network. Extrapolation of pore size distributions (PSDs) enables the BIB-SEM porosity to be estimated down to the resolution of the MIP and thus to upscale microstructural observation at the confined space of the BIB-SEM method to bulk porosity measurement. These inferred porosities are in good agreement with the MIP determined porosities, which underpins the assumption that pores segmented in BIB-SEM mosaics are representative of the MIP methodology. 相似文献
17.
The geochemical and petrographic characteristics of saline lacustrine shales from the Qianjiang Formation, Jianghan Basin were investigated by organic geochemical analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM) and low pressure nitrogen adsorption analysis. The results indicate that: the saline lacustrine shales of Eq3 member with high oil content are characterized by type I and type II oil-prone kerogen, variable TOC contents (1.0–10.0 wt%) and an early-maturity stage (Ro ranges between 0.41 and 0.76%). The mineral compositions of Eq3 saline shale show strong heterogeneity: brittle intervals with high contents of quartz and carbonate are frequently alternated with ductile intervals with high glauberite and clay contents. This combination might be beneficial for oil accumulation, but may cause significant challenges for the hydraulic stimulation strategy and long-term production of shale oil. The interparticle pores and intraparticle pores dominate the pore system of Eq3 shale, and organic matter hosted pores are absent. Widely distributed fractures, especially tectonic fractures, might play a key role in hydrocarbon migration and accumulation. The pore network is contributed to by both large size inorganic pores and abundant micro-factures, leading to a relatively high porosity (2.8–30.6%) and permeability (0.045–6.27 md) within the saline shale reservoir, which could enhance the flow ability and storage capacity of oil. The oil content (S1 × 100/TOC, mg HC/g TOC and S1, mg HC/g rock) and brittleness data demonstrate that the Eq33x section has both great potential for being a producible oil resource and hydraulic fracturing. Considering the hydrocarbon generation efficiency and properties of oil, the mature shale of Eq3 in the subsidence center of the Qianjiang Depression would be the most favorable zone for shale oil exploitation. 相似文献
18.
The microstructure of black siliceous shale from the lower Cambrian Niutitang Formation, Sichuan Basin in China was investigated by the combination of field emission scanning electron microscope (FE-SEM) and argon ion beam milling. The nanometer-to micrometer-scale pore systems of shales are an important control on gas storage and fluid migration. In this paper, the organic porosity in shale samples within oil and gas window has been investigated, and the formation mechanism and diagenetic evolution of nanopores have been researched.FE-SEM reveals five pore types that are classified as follows: organic nanopores, pores in clay minerals, nanopores of framework minerals, intragranular pores in microfossils, and microfractures. Numerous organic nanopores are observed in shales in the gas window, whereas microfractures can be seen within the organic matter of shales in the oil window. Microfractures in oil window shales could be attributed to pressure buildup in the organic matter when incompressible liquid hydrocarbon are generated, and the orientation of microfractures is probably parallel to the bedding and strength anisotropy of the formation. Pores in clay minerals are always associated with the framework of clay flakes, and develop around rigid mineral grains because the pressure shadows of mineral grains protect pores from collapse, and the increasing of silt content would lead to an increase in pressure shadows and improve porosity. Nanopores of rock framework are probably related to dissolution by acidic fluids from hydrocarbon generation, and the dissolution-related pores promote permeability of shales. Porosity in the low-TOC, low-thermal-maturity shales contrast greatly with those of high-TOC, high-thermal-maturity shales. While the high-TOC shales contain abundant organic microporosity, the inorganic pores can contribute a lot to the porosity of the low-TOC shales. 相似文献
19.
Fariborz Goodarzi 《Marine and Petroleum Geology》1984,1(3):202-210
The reflectance and bireflectance of graptolite fragments (Silurian-Ordovician) from southeast Turkey were examined and the morphology was described using reflected light microscopy. The dispersion of maximum and minimum reflectance of graptolites sectioned parallel and perpendicular to the bedding was also determined. The graptolites were anisotropic and the anisotropy was stronger for sections perpendicular to the bedding. The graptolite fragments show two types of surface morphology: granular and non-granular. The granular type had a rough surface and granular anisotropy, the non-granular fragments showed a smooth surface and basic anisotropy. The fine internal structure of graptolite was evident under crossed-polars. The reflectance of graptolite increased with depth and was higher than other organic material, e.g. bitumen, found in the same sediment. The present study indicates that the reflectance of graptolite in sediment can be used to determine the maturity of the dediment. 相似文献
20.
Nanoporosity of a shale gas reservoir provides essential information on the gas accumulation space and controls the gas reserves. The characteristics of heterogeneous nanoporosity of four shale samples are analyzed by combining quantitative evaluation of minerals by scanning electronic microscopy (QEMSCAN), focused ion beam-scanning electron microscopy (FIB-SEM), and nano-CT. The representative elementary area (REA) is proposed by QEMSCAN to detect the imaging area that can represent the overall contents of minerals and organic matter. Combined with the statistics of pores in minerals and organic matter by FIB-SEM, the quantitative nanoporosity is obtained. The nano-CT is used to compare the total nanoporosity that was obtained by FIB-SEM. The results show that shale has distinct characteristics in nanoporosities due to the variation in organic matter and mineral content. The major pore sizes of the organic matter and clay minerals are smaller than 400 nanometers (nm), and the pore sizes of feldspar and pyrite are mainly 200–600 nm. The pore sizes for pores developed in quartz and carbonate minerals range from a few nanometers to 1000 nm. Furthermore, pores smaller than 400 nm mainly provide the total nanoporosity. The nanoporosities in the organic matter are approximately 17%–21%. Since the organic matter content (0.54%–6.98%) is low, the organic matter contributes approximately 5%–33% of the total nanoporosity in shale. Conversely, the nanoporosities in quartz and clay are generally lower than 3%. Since the mineral content (93.02%–99.46%) is obviously higher than the organic matter content, the minerals contribute approximately 67%–95% of the total nanoporosity in shale. 相似文献