共查询到20条相似文献，搜索用时 140 毫秒
1.
Origin,physical, and mineralogical nature of red clays: The Pacific Ocean Basin as a model 总被引：2，自引：0，他引：2
Extensive examination of North Pacific Basin red clays by scanning and transmission electron microscopy reveals that the mean constituent of the red clays are illite-rich argillaceous or shale clasts, quartz and authigenic smectite. The main source of the shale clasts and quartz are aeolian in nature and are derived mainly from African and Asian shales. Illite-rich argillaceous or shale clasts are identifiable by their morphology (high degree of roundness), selected area diffraction, and their unique fracture characteristics created by an ultra thin-sectioning process. This allows for the identification and differentiation of illite-rich shale clasts from other clays, including detrital illite, kaolinite, and smectite. Geotechnical examination of the red clays indicate that they are overconsolidated: the preconsolidation stress is in all cases larger than the vertical effective stress. The overconsolidation is attributed to the strong bonding of argillaceous or shale clasts, quartz and other particulate matter by x-ray amorphous and well developed crystalline sheets of authigenic smectite characterized by high surface activity. 相似文献
2.
Abstract A large number of surface sediments as well as short sediment cores collected in the Central Indian Ocean Basin have been subjected to various geochemical investigations during the last one and half decade. The studies varied, covering different aspects of sediments and resulting in a number of publications. In the present article, we have put together the data from 82 surface sediments and 14 short sediment cores, including 25 new analyses, to study the trend of their distribution and source at large. The distribution maps of elements show that highest concentrations of Mn, Cu, Ni, Zn, Co, and biogenic opal in the surface sediment occurs between 10°S and 16°S latitude, where diagenetic ferromanganese nodules rich in Mn, Cu, Ni, and Zn are present. The studies highlight that the excess element concentration (detrital unsupported) such as Mn, Cu, Ba, Ni, Co, Pb, and Zn have contributed >80% of their respective bulk composition. These excess elements exhibit strong positive correlation with each other suggesting their association with a single authigenic phase such as Mn oxide. Biogenic opal contributes 30–50% of the total silica in the siliceous sediment. Aluminum, Fe, and K have contributed >60% from terrigenous detrital source compared to their bulk composition. In calcareous ooze, Ca, and Sr excess contribute >95% while, in siliceous ooze it is only 50% of their bulk composition. Nearly 35% of structurally unsupported Al in the sediment raises doubt of using Al as a terrigenous index element to normalize the trace and minor elements. Biogenic apatite is evident by the positive correlation between Ca (<1%) and P. Calcium, Sr, and P depict a common source such as biogenic. Bulk element concentration such as Li, V, Cr, Sc, and Zr are positively correlated with Ti indicating their terrigenous detrital source. Rare earth element (REE) concentration increases from calcareous ooze to siliceous ooze and reaches a maximum in the red clay. Presence of positive Eu-anomaly in these sediments has been attributed to aeolian input. REE in these sediments are mostly carried by authigenic phases such as manganese oxide and biogenic apatite. Based on the distribution of transition elements in the sediment cores, three distinct zones—oxic at top, suboxic at intermediate depth, and a subsurface maxima—have been identified. Oxic and suboxic zones are incidentally associated with high and low micronodule abundance in the coarse fraction (>63 μm) respectively. Ash layers encountered at intermediate depth between 10 to 35 cm are correlative with the Youngest Toba eruption of ～74ka from Northern Sumatra. This ash is mainly responsible for the high bulk Al/Ti ratio up to 48.5 (three times higher than Post Archean Australian Shale), other than scavenging of dissolved Al by biogenic components. 相似文献
3.
The paper takes the Upper Carboniferous Taiyuan shale in eastern uplift of Liaohe depression as an example to qualitatively and quantitatively characterize the transitional (coal-associated coastal swamp) shale reservoir. Focused Ion Beam Scanning Electron Microscope (FIB-SEM), nano-CT, helium pycnometry, high-pressure mercury intrusion and low-pressure gas (N2 & CO2) adsorption for eight shale samples were taken to investigate the pore structures. Four types of pores, i.e., organic matter (OM) pores, interparticle (InterP) pores, intraparticle (IntraP) pores and micro-fractures are identified in the shale reservoir. Among them, intraP pores and micro-fractures are the major pore types. Slit-shaped pores are the major shape in the pore system, and the connectivity of the pore-throat system is interpreted to be moderate, which is subordinate to marine shale. The porosity from three dimension (3D) reconstruction of SEM images is lower than the porosity of helium pycnometry, while the porosity trend of the above two methods is the same. Combination of mercury intrusion and gas absorption reveals that nanometer-scale pores provide the main storage space, accounting for 87.16% of the pore volume and 99.85% of the surface area. Micropores contribute 34.74% of the total pore volume and 74.92% of the total pore surface area; and mesopores account for 48.27% of the total pore volume and 24.93% of the total pore surface area; and macropores contribute 16.99% of the total pore volume and 0.15% of the total pore surface area. Pores with a diameter of less than 10 nm contribute the most to the pore volume and the surface area, accounting for 70.29% and 97.70%, respectively. Based on single factor analysis, clay minerals are positively related to the volume and surface area of micropores, mesopores and macropores, which finally control the free gas in pores and adsorbed gas content on surface area. Unlike marine shale, TOC contributes little to the development of micropores. Brittle minerals inhibit pore development of Taiyuan shale, which proves the influence of clay minerals in the pore system. 相似文献
4.
Organic shales deposited in a continental environment are well developed in the Ordos Basin, NW China, which is rich in hydrocarbons. However, previous research concerning shales has predominantly focused on marine shales and barely on continental shales. In this study, geochemical and mineralogical analyses, high-pressure mercury intrusion and low-pressure adsorption were performed on 18 continental shale samples obtained from a currently active shale gas play, the Chang 7 member of Yanchang Formation in the Ordos Basin. A comparison of all these techniques is provided for characterizing the complex pore structure of continental shales.Geochemical analysis reveals total organic carbon (TOC) values ranging from 0.47% to 11.44%, indicating that there is abundant organic matter (OM) in the study area. Kerogen analysis shows vitrinite reflectance (Ro) of 0.68%–1.02%, indicating that kerogen is at a mature oil generation stage. X-ray diffraction mineralogy (XRD) analysis indicates that the dominant mineral constituents of shale samples are clay minerals (which mainly consist of illite, chlorite, kaolinite, and negligible amounts of montmorillonite), quartz and feldspar, followed by low carbonate content. All-scale pore size analysis indicates that the pore size distribution (PSD) of shale pores is mainly from 0.3 to 60 nm. Note that accuracy of all-scale PSD analysis decreases for pores less than 0.3 nm and more than 10 μm. Experimental analysis indicates that mesopores (2–50 nm) are dominant in continental shales, followed by micropores (<2 nm) and macropores (50 nm–10 μm). Mesopores have the largest contribution to pore volume (PV) and specific surface area (SSA). In addition, plate- and sheet-shaped pores are dominant with poor connectivity, followed by hybrid pores. Results of research on factors controlling pore structure development show that it is principally controlled by clay mineral contents and Ro, and this is different from marine systems. This study has important significance in gaining a comprehensive understanding of continental shale pore structure and the shale gas storage–seepage mechanism. 相似文献
5.
Much attention have been recently paid to the upper Ordovician Wufeng shale (O3w) and lower Silurian Longmaxi shale (S1l) in the Jiaoshiba area of Sichuan Basin, which is now the largest producing shale gas field in China. Field emission scanning electron microscopy (FE-SEM), low pressure gas (N2 and CO2) adsorption, helium pycnometry, X-ray diffraction and geochemical analyses were performed to investigate the pore structure and fractal dimension of the pores in O3w-S1l shale formation in the Jiaoshiba area. FE-SEM images show that organic matter (OM) pores are dominant in the organic-rich samples and these pores are often irregular, bubble-like, elliptical and faveolate in shape, while in organic-poor samples, limited and isolated interparticle (interP), intraparticle (intraP) and OM pores are observed. Reversed S-shaped isotherms obtained from nitrogen adsorption are type Ⅱ, and hysteresis loops indicate that the shape of micropore in the samples is slit-or plate-like. BET surface areas and total pore volume vary from 12.2 to 27.1 m2/g and from 1.8 × 10−2 to 2.9 × 10−2 cm3/g, with an average of 19.5 m2/g and 2.3 × 10−2 cm3/g, respectively. Adsorption volume from both N2 and CO2 adsorption increases with respect to TOC contents. Porosities obtained from helium porosimetry are comparable with these from gas (CO2 and N2) adsorption in O3w-S1l shale. However, porosity determined by quantitative FE-SEM analysis is much smaller, which is mainly related to limited resolution and the small areas of investigation.Based on the Frenkel-Halsey-Hill (FHH) model of low-pressure N2 adsorption, fractal dimensions of the pores varied from 2.737 to 2.823. Relationships between pore structure parameters and TOC content, mineral composition and fractal dimension reveal that the fractal dimension is mainly associated with micropores. Samples with higher TOC content, higher quartz content and lower clay content tend to contain more heterogeneous micropores, resulting in higher fractal dimensions and more complicated pore structure in shales. Therefore, fractal dimension is an effective parameter to reflect the complexity of pore structure and the degree of micropore development in O3w-S1l shale. 相似文献
6.
The geochemical and petrographic characteristics of saline lacustrine shales from the Qianjiang Formation, Jianghan Basin were investigated by organic geochemical analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM) and low pressure nitrogen adsorption analysis. The results indicate that: the saline lacustrine shales of Eq3 member with high oil content are characterized by type I and type II oil-prone kerogen, variable TOC contents (1.0–10.0 wt%) and an early-maturity stage (Ro ranges between 0.41 and 0.76%). The mineral compositions of Eq3 saline shale show strong heterogeneity: brittle intervals with high contents of quartz and carbonate are frequently alternated with ductile intervals with high glauberite and clay contents. This combination might be beneficial for oil accumulation, but may cause significant challenges for the hydraulic stimulation strategy and long-term production of shale oil. The interparticle pores and intraparticle pores dominate the pore system of Eq3 shale, and organic matter hosted pores are absent. Widely distributed fractures, especially tectonic fractures, might play a key role in hydrocarbon migration and accumulation. The pore network is contributed to by both large size inorganic pores and abundant micro-factures, leading to a relatively high porosity (2.8–30.6%) and permeability (0.045–6.27 md) within the saline shale reservoir, which could enhance the flow ability and storage capacity of oil. The oil content (S1 × 100/TOC, mg HC/g TOC and S1, mg HC/g rock) and brittleness data demonstrate that the Eq33x section has both great potential for being a producible oil resource and hydraulic fracturing. Considering the hydrocarbon generation efficiency and properties of oil, the mature shale of Eq3 in the subsidence center of the Qianjiang Depression would be the most favorable zone for shale oil exploitation. 相似文献
7.
Studying complex pore structures is the key to understanding the mechanism of shale gas accumulation. FIB-SEM (focused ion beam-scanning electron microscope) is the mainstream and effective instrument for imaging nanopores in gas shales. Based on this technology, 2D and 3D characteristics of shale samples from Lower Silurian Longmaxi formation in southern Sichuan Basin were investigated. 2D experimental results show that the pores in shale are nanometer-sized, and the structure of those nanopores can be classified into three types: organic pores, inorganic pores and micro fractures. Among the three types, organic pores are dominantly developed in the OM (organic matter) with three patterns such as continuous distributed OM, OM between clay minerals and OM between pyrite particles, and the size of organic pores range from 5 nm to 200 nm.Inveresly, inorganic pores and micro fractures are less developed in the Longmaxi shales. 3D digital rocks were reconstructed and segmented by 600 continuous images by FIB cutting and SEM imaging simultaneously. The pore size distribution and porosity can be calculated by this 3D digital core, showing that its average value is 32 nm and porosity is 3.62%.The 3D digital porosity is higher than its helium porosity, which can be regarded as one important parameter for evaluation of shale gas reserves. The 2D and 3D characterized results suggest that the nanometer-sized pores in organic matter take up the fundamental storage space for the Longmaxi shale. These characteristics have contributed to the preservation of shale gas in this complex tectonic area. 相似文献
8.
Nanoporosity of a shale gas reservoir provides essential information on the gas accumulation space and controls the gas reserves. The characteristics of heterogeneous nanoporosity of four shale samples are analyzed by combining quantitative evaluation of minerals by scanning electronic microscopy (QEMSCAN), focused ion beam-scanning electron microscopy (FIB-SEM), and nano-CT. The representative elementary area (REA) is proposed by QEMSCAN to detect the imaging area that can represent the overall contents of minerals and organic matter. Combined with the statistics of pores in minerals and organic matter by FIB-SEM, the quantitative nanoporosity is obtained. The nano-CT is used to compare the total nanoporosity that was obtained by FIB-SEM. The results show that shale has distinct characteristics in nanoporosities due to the variation in organic matter and mineral content. The major pore sizes of the organic matter and clay minerals are smaller than 400 nanometers (nm), and the pore sizes of feldspar and pyrite are mainly 200–600 nm. The pore sizes for pores developed in quartz and carbonate minerals range from a few nanometers to 1000 nm. Furthermore, pores smaller than 400 nm mainly provide the total nanoporosity. The nanoporosities in the organic matter are approximately 17%–21%. Since the organic matter content (0.54%–6.98%) is low, the organic matter contributes approximately 5%–33% of the total nanoporosity in shale. Conversely, the nanoporosities in quartz and clay are generally lower than 3%. Since the mineral content (93.02%–99.46%) is obviously higher than the organic matter content, the minerals contribute approximately 67%–95% of the total nanoporosity in shale. 相似文献
9.
Xiaochen Liu Yangbo Lu Yongchao Lu Lei Chen Yiquan Ma Chao Wang 《Marine Geophysical Researches》2018,39(3):421-439
Based on cores, well logs and seismic data, we established the isochronous sequence stratigraphic framework of the Lower Silurian Longmaxi Formation and predicted the shale lithofacies distribution within the sequence stratigraphic framework using geostatistical inversion. The results of our study show that the Lower Member of the Longmaxi Formation is a third order sequence that includes a transgressive systems tract (TST), an early highstand systems tract (EHST) and a late highstand systems tract (LHST). Four lithofacies units have been recognized, specifically siliceous shale, argillaceous shale, calcareous shale and mixed shale. The results of geostatistical inversion reveal that the TST is characterized by flaky siliceous shale and some sparsely distributed calcareous shale. The EHST is dominated by mixed shale with minor amounts of siliceous shale, which occurs in only a small area. Moreover, in the LHST, argillaceous shale occupies almost the entire study region. Comparing to traditional geological research with geophysical research, the vertical resolution of the predictive results of geostatistical inversion could reach 1–2 m. Geostatistical inversion effectively solves the problem of precisely identifying the lithofacies in the Fuling shale gas field and predicting their spatial distribution. This successful study showcases the potential of this method for carrying out marine shale lithofacies prediction in China and other locations with similar geological backgrounds. 相似文献
10.
Zhanhua Sag is a widely accepted target zone with huge exploration and development potential for shale oil and shale gas resources. Many detailed studies have been undertaken around the geochemistry of the lower section of the third member of the Shahejie Formation (Es3x), while few studies have focused on the reservoir. In this study, based on the mineralogical features and geochemical characteristics, and by using statistical methods, the characteristics and controlling factors of reservoir space of mudstone and shale in Es3x in the Zhanhua Sag are explored through field-emission scanning electron microscopy (FE-SEM), high pressure mercury injection capillary pressure (MICP), and nuclear magnetic resonance (NMR) techniques. Three major findings were obtained. ① There are micropores and microfractures in the reservoir space, which include intergranular pores, clay intercrystal pores, pyrite intercrystal pores, dissolved pores, structural microfractures, and bedding microfractures. ② According to the features of pore size distribution (PSD), the pore distribution can be divided into the following three categories: 0–50 nm, 50 nm–2 μm, and >2 μm; the average volumes of these components are 0.01079 mL g−1, 0.00361 mL g−1, and 0.00355 mL g−1, respectively, thus showing that the pores whose radii are distributed at 0–50 nm form the most important reservoir space (though those with the 50 nm–2 μm and >2 μm radii are also important and cannot be ignored). ③ There are different controlling factors when it comes to different scale pores. Based on statistics and FE-SEM results, the dissolved pores in calcite were determined to be the controlling factor for the 0–50 nm portion, the intercrystalline pores in clay and pyrite, and intergranular pores between authigenic minerals (calcite, dolomite, and pyrite) and clastic minerals (calcite and dolomite) were determined to be the controlling factors for the 50 nm–2 μm portion, and the structural microfractures and bedding microfractures were determined to be the main factors for the >2 μm portion. Furthermore, it is the brittle minerals content and bedded structure that control the microfractures. This study thus clarifies the types and characteristics of reservoir space and identifies pore structure controlling factors of mudstone and shale in Es3x in the Zhanhua Sag; this information has important significance for future reservoir evaluations. 相似文献
11.
南海东部海域表层沉积物类型的研究 总被引：10，自引：3，他引：7
南海东部海域表层沉积物可被分为11种类型:含岩块砾石黏土质粉砂、贝壳珊瑚砂、黏土质粉砂、钙质黏土、钙质软泥、有孔虫砂、深海黏土、含铁锰微粒粉砂质黏土、硅质黏土、含火山灰硅质黏土、含火山灰粉砂质黏土.这些类型按物源和成因可被分为陆源碎屑、钙质碎屑和硅质碎屑、火山碎屑3大类型,其中陆源碎屑分布面积约占50%,钙质碎屑占20%,硅质碎屑和火山碎屑各占15%.在物质来源、海底地形、火山作用、生物作用、水动力条件等因素影响和控制下,由于沉积环境的差异,故区内褐色类沉积物最多(60.68%),灰色类沉积物次之(38.20%),黄色类沉积物最少(1.12%).台湾省以南到17°N以北海区沉积物以陆源沉积物分布为主;巴士海峡以西海区沉积物较粗,常含砂岩块和砾石;东沙群岛以东海区钙质生物碎屑沉积丰富;中、西部海区以含铁锰微粒沉积物为主;中、南部海区水深大,主要分布硅质沉积物;南部海区、礼乐滩北缘沉积物受礼乐滩珊瑚碎屑影响大,沉积物类型为钙质软泥. 相似文献
12.
Shale reservoirs of the Middle and Upper Devonian Horn River Group provide an opportunity to study the influence of rock composition on permeability and pore throat size distribution in high maturity formations. Sedimentological, geochemical and petrophysical analyses reveal relationships between rock composition, pore throat size and matrix permeability.In our sample set, measured matrix permeability ranges between 1.69 and 42.81 nanodarcies and increases with increasing porosity. Total organic carbon (TOC) content positively correlates to permeability and exerts a stronger control on permeability than inorganic composition. A positive correlation between silica content and permeability, and abundant interparticle pores between quartz crystals, suggests that quartz may be another factor enhancing the permeability. Pore throat size distributions are strongly related to TOC content. In organic rich samples, the dominant pore throat size is less than 10 nm, whereas in organic lean samples, pore throat size distribution is dominantly greater than 20 nm. SEM images suggest that in organic rich samples, organic matter pores are the dominant pore type, whereas in quartz rich samples, the dominant type is interparticle pores between quartz grains. In clay rich and carbonate rich samples, the dominant pore type is intraparticle pores, which are fewer and smaller in size.High permeability shales are associated with specific depositional facies. Massive and pyritic mudstones, rich in TOC and quartz, have comparatively high permeability. Laminated mudstone, bioturbated mudstone and carbonate facies, which are relatively enriched in clay or carbonate, have fairly low permeability. 相似文献
13.
14.
The pore size classification (micropore <2 nm, mesopore 2–50 nm and macropore >50 nm) of IUPAC (1972) has been commonly used in chemical products and shale gas reservoirs; however, it may be insufficient for shale oil reservoirs. To establish a suitable pore size classification for shale oil reservoirs, the open pore systems of 142 Chinese shales (from Jianghan basin) were studied using mercury intrusion capillary pressure analyses. A quantitative evaluation method for I-micropores (0–25 nm in diameter), II-micropores (25–100 nm), mesopores (100–1000 nm) and macropores (>1000 nm) within shales was established from mercury intrusion curves. This method was verified using fractal geometry theory and argon-ion milling scanning electron microscopy images. Based on the combination of pore size distribution with permeability and average pore radius, six types (I-VI) shale open pore systems were analyzed. Moreover, six types open pore systems were graded as good, medium and poor reservoirs. The controlling factors of pore systems were also investigated according to shale compositions and scanning electron microscopy images. The results show that good reservoirs are composed of shales with type I, II and III pore systems characterized by dominant mesopores (mean 68.12 vol %), a few macropores (mean 7.20 vol %), large porosity (mean 16.83%), an average permeability of 0.823 mD and an average pore radius (ra) of 88 nm. Type IV pore system shales are medium reservoirs, which have a low oil reservoir potential due to the developed II-micropores (mean 57.67 vol %) and a few of mesopores (mean 20.19 vol %). Poor reservoirs (composed of type V and VI pore systems) are inadequate reservoirs for shale oil due to the high percentage of I-micropores (mean 69.16 vol %), which is unfavorable for the flow of oil in shale. Pore size is controlled by shale compositions (including minerals and organic matter), and arrangement and morphology of mineral particles, resulting in the developments of shale pore systems. High content of siliceous mineral and dolomite with regular morphology are advantage for the development of macro- and mesopores, while high content of clay minerals results in a high content of micropores. 相似文献
15.
Diagenesis is of decisive significance for the reservoir heterogeneity of most clastic reservoirs. Linking the distribution of diagenetic processes to the depositional facies and sequence stratigraphy has in recent years been discipline for predicting the distribution of diagenetic alterations and reservoir heterogeneity of clastic reservoirs. This study constructs a model of distribution of diagenetic alterations and reservoir heterogeneity within the depositional facies by linking diagenesis to lithofacies, sandstone architecture and porewater chemistry during burial. This would help to promote better understanding of the distribution of reservoir quality evolution and the intense heterogeneity of reservoirs. Based on an analogue of deltaic distributary channel belt sandstone in Upper Triassic Yanchang Formation, 83 sandstone plug samples were taken from 13 wells located along this channel belt. An integration of scanning electron microscopy, thin sections, electron microprobe analyses, rate-controlled porosimetry (RCP), gas-flow measurements of porosity and permeability, and nuclear magnetic resonance (NMR) experiments, together with published data, were analysed for the distribution, mineralogical and geochemical characteristics of detrital and diagenetic components and the distribution of reservoir quality within the distributary channel belt.Distribution of diagenetic alterations and reservoir heterogeneity within the distributary channel belt sandstones include (i) formation of high quality chlorite rims in the middle part of thick sandstones with coarser grain sizes and a lower content of ductile components resulted from the greater compaction resistance of these sandstones (providing larger pore spaces for chlorite growth), leading to formation of the intergranular pore – wide sheet-like throat and intergranular pore - intragranular pore – wide sheet-like throat (Φ>15%, k>1mD) in the middle part of thick sandstones; (ii) formation of thinner chlorite rims in the middle part of thinner sandstones is associated with the intergranular pore - intragranular pore – narrow sheet-like throat (9%<Φ<14%, 0.2mD<k<0.8mD); (iii) strong cementation by kaolinite in the more proximal sandstones of distributary channel owing to the strong feldspar dissolution by meteoric water, resulting in the intragranular pore - group of interstitial cement pores – narrow sheet-like throat/extremely narrow sheet-like throat (8%<Φ<11%, 0.1mD<k<0.3mD) due to the pore-filling kaolinite occluding porosity; (iv) formation of dense ferrocalcite zones (δ18OVPDB = −23.4‰ to −16.6‰; δ13 CVPDB = −4.0‰ to −2.3‰) favoured in the top and bottom of the channel sandstone which near the sandstone-mudstone bouding-surface, destroying pore space (Φ<8%, k<0.1mD); (v) strong compaction in sandstone of distributary channel edge laterally as a result of fine grain size and high content of ductile components in those sandstones, forming the group of interstitial cement pores – extremely narrow sheet-like throat with porosity values less than 8%. 相似文献
16.
The Es3L (lower sub-member of the third member of the Eocene Shahejie Formation) shale in the Jiyang Depression is a set of relatively thick and widely deposited lacustrine sediments with elevated organic carbon, and is considered to be one of the most important source rocks in East China. We can determine the mineralogy, organic and inorganic geochemistry of the Es3L shale and calculate paleoclimate indexes by using multiple geochemical proxies based on organic chemistry (total organic carbon [TOC] and Rock-Eval pyrolysis), major and trace elements, X-Ray diffraction, and carbon and oxygen isotope data from key wells alongside ECS (Elemental Capture Spectroscopy) well log data. These indicators can be used to analyze the evolution of the paleoenvironment and provide a mechanism of organic matter (OM) accumulation. The Es3L oil shale has high TOC abundance (most samples >3.0%) and is dominated by Type I kerogens. Additionally, the organic-rich shale is rich in CaO and enrichment in some trace metals is present, such as Sr, Ba and U. The positive δ13C and negative δ18O values, high Sr/Ba, B/Ga and Ca/Ca + Fe ratios and low C/S ratios indicate that the Es3L shales were mainly deposited in a semi-closed freshwater-brackish water lacustrine environment. The consistently low Ti/Al and Si/Al ratios reflect a restricted but rather homogeneous nature for the detrital supply. Many redox indicators, including the Th/U, V/(V + Ni), and δU ratios, pyrite morphology and TOC-TS-Fe diagrams suggest deposition under dysoxic to suboxic conditions. Subsequently, the brackish saline bottom water evolved into an anoxic water body under a relatively arid environment, during which organic-lean marls were deposited in the early stage. Later, an enhanced warm-humid climate provided an abundant mineral nutrient supply and promoted the accumulation of algal material. OM input from algal blooms reached a maximum during the deposition of the organic-rich calcareous shale with seasonal laminations. High P/Ti ratios and a strongly positive relationship between the P and TOC contents indicate that OM accumulation in the oil shale was mainly controlled by the high primary productivity of surface waters with help from a less stratified water column. Factors such as the physical protection of clay minerals and the dilution of detrital influx show less influence on OM enrichment. 相似文献
17.
The Lower Silurian Longmaxi Shale in the southeastern Upper Yangtze Region, which has been the main target for shale gas exploration and production in China, is black marine organic-rich shale and rich in graptolites. Graptolites, usually only periderms preserved in shales, are important organic component of the Longmaxi Shale. However, the pore structure of graptolite periderms and its contribution to gas storage has not yet been studied before. A combination of optical microscopy for identification and “mark” of graptolite and scanning electron microscope (SEM) for pore observations were conducted for the Longamxi Shale samples. Results show that pores are anisotropic developed in the Longmaxi graptolite periderms and greatly associated with their fine structure. Micrometer-sized fractures and spindle-shaped pores between cortical fibrils in the cortical bandage are greatly developed at section parallel to the bedding, while they are rare at section perpendicular to the bedding. Besides, numerous sapropel detritus rich in nanometer-sized pores are discretely distributed in the shale. Though graptolite periderms are low porosity from SEM image analysis, microfractures and elongated pores along the graptolite periderm wall may still make the graptolite an interconnected system. Together with the discrete porous sapropel detritus in shale, these graptolite-derived Organic Matter (OM) may form an interconnected organic pore system in the shale. The difference of pore development observed in graptolite periderms and sapropel detritus also give us new insight for the organic pore heterogeneity study. The OM composition, their fine structure and orientation in the rock may be important factors controlling OM pore development. The combination of identifying OM type under optical microscopy and pores observation under SEM for may be an effective method to study the OM pore development especially in shale that contain more OM. 相似文献
18.
As shale oil occurs primarily in micro–nano pores and fractures, research about the effect of pore structure on shale oil accumulation has great significance for shale oil exploration and development. The effect of pore structure on shale oil accumulation in the lower third member of the Shahejie formation (Es3l), Zhanhua Sag, eastern China was investigated using gas adsorption, soxhlet extraction, nuclear magnetic resonance (NMR) analysis, and field emission scanning electron microscope (FE-SEM) observation. The results indicated that the samples contained a larger amount of ink-bottle-shaped and slit-shaped pores after extraction than before extraction. The pore volume and specific surface area of the samples were approximately 2.5 times larger after extraction than before extraction. Residual hydrocarbon occurred primarily in the free-state form in pores with diameters of 10–1000 nm, which can provide sufficient pore volume for free hydrocarbon accumulation. Therefore, pores with diameters of 10–1000 nm were regarded as “oil-enriched pores”, which are effective pores for shale oil exploration, whereas pores with diameters smaller than 10 nm were regarded as “oil-ineffective pores”. Samples with only well-developed small pores with diameters smaller than 1000 nm showed high oil saturation, whereas samples with both small pores and also relatively large pores and micro-fractures presented low oil saturation. As the minimum pore size allowing fluid expulsion is 1000 nm, pores with diameters greater than 1000 nm were considered as “oil-percolated pores”. Large pores and micro-fractures are generally interconnected and may even form a complex fracture mesh, which greatly improves the permeability of shale reservoirs and is beneficial to fluid discharge. 相似文献
19.
An example of diagenesis and reservoir quality of buried sandstones with ancient incursion of meteoric freshwater is presented in this study. The interpretation is based on information including porosity and permeability, petrography, stable isotopic composition of authigenic minerals, homogenization temperatures (Th) of aqueous fluid inclusions (AFIs), and pore water chemistry. These sandstones, closely beneath or far from the regional unconformity formed during the late Paleogene period, are located in the thick Shahejie Formation in the Gaoliu area of Nanpu Sag, Bohai Bay Basin, East China. Early-diagenetic calcite cements were leached to form intergranular secondary pores without precipitation of late-diagenetic calcite cements in most sandstones. Feldspars were leached to form abundant intragranular secondary pores, but with small amounts of concomitant secondary minerals including authigenic quartz and kaolinite. The mass imbalance between the amount of leached minerals and associated secondary minerals suggests that mineral leaching reactions occurred most likely in an open geochemical system, and diagenetic petrography textures suggest that advective flow dominated the transfer of solutes from leached feldspars and calcites. Low salinity and ion concentrations of present pore waters, and extensive water rock interactions suggest significant incursion of meteoric freshwater flux in the sandstones. Distances of the sandstones to the regional unconformity can reach up to 1800 m, while with significant uplift in the Gaoliu area, the burial depth of such sandstones (below sea level) can be less than 800–1000 m during the uplift and initial reburial stage. Significant uplift during the Oligocene period provided substantial hydraulic drive and widely developed faults served as favorable conduits for downward penetration of meteoric freshwater from the earth's surface (unconformity) to these sandstone beds. Extensive feldspar leaching has been occurring since the uplift period. Coupled high Th (95∼115 °C) of AFI and low δ18O(SMOW) values (+17∼+20‰) within the quartz overgrowths show that quartz cementation occurred in the presence of diagenetic modified meteoric freshwater with δ18O(SMOW) values of −7∼−2‰, indicating that authigenic quartz only have been formed during the late reburial stage when meteoric fresh water penetration slowed down. Secondary pores in thin sections and tested porosity suggest that meteoric freshwater leaching of feldspars and calcite minerals generated approximately 7–10% enhanced secondary porosity in these sandstones. Meteoric freshwater leaching reactions cannot be ignored in similar sandstones that located deep beneath the unconformity, with great uplift moving these sandstones above or close to sea level and with faults connecting the earth's surface with the sandstone beds. 相似文献
20.
以X-射线衍射仪和偏光显微镜为主要手段,对南海调查区表层底质沉积物中黏土和碎屑矿物组分进行分析和研究,结果表明黏土矿物主要有伊利石、蒙皂石、高岭石和绿泥石,其组合特征在不同区域表现出明显的差异。碎屑成分主要由生物壳(钙质和硅质)、轻矿物(石英、长石为主)和含量低但种类多的重矿物组成。一般认为物质来源是调查区沿岸风化岩石遭受进一步剥蚀后细小组分通过水动力搬运沉积而成的。钙质和硅质生物壳分布受南海碳酸盐补偿深度(CCD)的控制。 相似文献